Amphenol Pcd
D-SUB CONNECTORS
11.2018
Visit amphenolpcd.com for more information
2
TABLE OF CONTENTS
Introduction
Typical Applications
Mil-DTL-24308 Connector Technical Specications
Ordering Information
Assemblies
Insert Arrangements
Recommended PCB Layout
Contacts
Crimping
Floating Mountain Bushing Options
Tooling
Panel Cutout
Crimp: Receptacle
Crimp: Plug
Solder Cup: Receptacle
Solder Cup: Plug
Straight PC Tail: Receptacle
Straight PC Tail: Plug
Right Angle PC Tail: Receptacle
Right Angle PC Tail: Plug
PC Tail Application Data & Dimensions
APPROVED QPL LISTING
SPECIAL PRODUCTS
Standard Density Solder-Non Environmental: Plug & Receptacle
Standard Density Grommet-Crimp: Plug & Receptacle
Standard Density Straight PC Tail: Plug & Receptacle
High Density Straight PC Tail: Plug & Receptacle
Standard D-Sub Right Angle PC Tail: Plug & Receptacle
Standard D-Sub Right Angle PC Tail W/ Extra PC Tail Length: Plug & Receptacle
Right Angle PC Tail: Plug & Receptacle
Saver Type Connector
Strain Relief Backshell
Female Screw Lock Assembly
Male Screw Lock Assembly
Dust Cover: Plug & Receptacle
Gasket For D-Sub Connectors
3
3
3
4
5
6
7-8
9-10
11
12
12-13
14-15
16-17
18-19
20
21
22-23
24-25
26-27
28-29
30
31-86
87
88-89
90-91
92-99
100-103
104-105
106-107
108-111
112-113
114
115
116
117
118
Contact dsubs@amphenolpcd.com 3
INTRODUCTION
MIL-DTL-24308 Connector Technical Specications
Characteristics Standard High Density
Material
Shell Steel/Brass Steel/Brass
Insulator* Glass–Filled Polyester UL 94-0 (Natural Colour) Glass–Filled Polyester UL 94-0 (Natural Colour)
Contact Copper Alloy Copper Alloy
Finish Shell Cadmium/Zinc/Nickel/Zinc Nickel/Gold Cadmium/Zinc/Nickel/Zinc Nickel/Gold
Contact Gold Plating Gold Plating
Electrical
Contact Rating 7.5A Max. 5.0A Max.
Test Voltage–Max 1000 Vrms 1000 Vrms
Insulation Resistance > 5000 M Ohm > 5000 M Ohm
Contact Resistance 7.3 m Ohm 12 m Ohm
Mechanical
Insertion/Removal Force 4 lb Max. 4 lb Max.
Durability 500 Cycle 500 Cycle
Wire Gauge AWG 20-26 AWG 22-28
Environmental
Temperature - 55°C to + 125°C - 55°C to + 125°C
Salt Spray 48 Hrs. 48 Hrs.
Damp Heat 10 Days 10 Days
Qualied to MIL-DTL-24308, Amphenol’s D-Sub connectors are sub-miniature rack & panel type connectors with polar-
ized shells. They use pin & socket machined contacts that provide high reliability & density for the connectors. With
its versatile design, these high-performance connectors are used in a variety of applications where weight & size are
critical factors.
Available in multiple QPL’s – M24308/1, /2, /3, /4, /5, /6, /7, /8, /23 & /24 - Amphenol’s D-Sub connectors come in 5
standard shell sizes (9, 15, 25, 37, & 50) and have pin counts ranging from 9 to 104. There are various termination op-
tions – solder, crimp and PC Tail in both magnetic and non-magnetic options.
Typical Applications:
• Military
• C4I
• Missiles
• Commercial Aerospace
• Avionics
• In-Flight Entertainment
*For DAP insert please contact factory.
Description:
Visit amphenolpcd.com for more information
4
ORDERING INFORMATION
Connector Type
1 - Receptacle Solder Cup Connector
3 - Plug Solder Cup Connector
5 - Receptacle Solder Cup Connector (With Nonmagnetic Shell)
7 - Plug Solder Cup Connector (With Nonmagnetic Shell)
2 - Receptacle Crimp Type Connector
4 - Plug Crimp Type Connector
6 - Receptacle Crimp Type Connector (With Nonmagnetic Shell)
8 - Plug Crimp Type Connector (With Nonmagnetic Shell)
23 - Receptacle Straight/Right Angle PC Tail Connector
24 - Plug Straight/Right Angle PC Tail Connector
Finish
Class G (Magnetic)
F - Cadmium Yellow Passivation
Z - Zinc Yellow Passivation
K - Zinc Nickel Black
Class N (Non-Magnetic)
F - Cadmium Yellow Passivation
Z - Zinc Yellow Passivation
Class D (Magnetic)
None - Electroless Nickel
Class M (Non-Magnetic Space Application)
None - Gold
Shell Size
Insert Layout
Standard Density High Density
1 09 15
2 15 26
3 25 44
4 37 62
5 50 78
6 - 104
Shell Size
M24308 X XX X
Military Designation Connector Type
Dash Number
Finish
Refer to Approved QPL Listing
table starting on pg. 31
Contact dsubs@amphenolpcd.com 5
ASSEMBLIES-CRIMP TYPE
Receptacle Assembly Exploded View
Plug Assembly Exploded View
Front Shell Front Insert Rear Insert Receptacle Contact Retention clip Rear Shell
Front Shell Front Insert Rear Insert Pin Contact Retention clip Rear Shell
Shell Size
Visit amphenolpcd.com for more information
6
INSERT ARRANGEMENTS
Insert Arrangement for Standard D-Sub Connectors
Insert Arrangement for High Density D-Sub Connectors
9 Positions 15 Positions
37 Positions
25 Positions
50 Positions
15 Positions 26 Positions
44 Positions
62 Positions
78 Positions
104 Positions
• Markings are shown from pin insert front. Socket inserts are opposite.
• Markings are shown from pin insert front. Socket inserts are opposite.
Contact dsubs@amphenolpcd.com 7
RECOMMENDED PCB LAYOUT
Standard D-Sub Connectors
9 Positions
15 Positions
25 Positions
37 Positions
50 Positions
• Markings are shown from pin insert front. Socket inserts are opposite.
Visit amphenolpcd.com for more information
8
RECOMMENDED PCB LAYOUT
High Density D-Sub Connectors
• Markings are shown from pin insert front. Socket inserts are opposite.
15 Positions
26 Positions
44 Positions
62 Positions
78 Positions
104 Positions
00.89
00.89
00.89
00.89
00.89
00.89
Contact dsubs@amphenolpcd.com 9
STANDARD DENSITY D-SUB CONTACTS
Colour Code
Colour Code
0.040
(1,02)
Stainless Steel Shroud
B
B
C
C
0.170
(4,32)
0.170
(4,32)
A
A
Dimensions
Part Number Wire Size A B C
AWG mm2inches mm inches mm inches mm
M2000-107687 20, 22, 24 0.5, 0.3, 0.25 0.538 13.67 0.044 1.12 0.066 1.68
M2000-109979 26, 28, 30 0.12, 0.08, 0.05 0.538 13.67 0.027 0.69 0.066 1.68
*M39029/63-368 20, 22, 24 0.5, 0.3, 0.25 0.538 13.67 0.044 1.12 0.066 1.68
Dimensions
Part Number Wire Size Awg (mm2)A B C
AWG mm2inches mm inches mm inches mm
M2000-107688 20, 22, 24 0.5, 0.3, 0.25 0.550 13.97 0.044 1.12 0.066 1.68
M2000-109980 26, 28, 30 0.12, 0.08, 0.5 0.550 13.97 0.027 0.69 0.066 1.68
*M39029/64-369 20, 22, 24 0.5, 0.3, 0.25 0.550 13.97 0.044 1.12 0.066 1.68
Female Contact (Closed Entry) Design
Material: Copper Alloy
Plating: Gold ash over nickel or 0.000050 inch (1.25) gold over copper for military specication contacts
Color Code: Orange/Blue/Grey for military specication contacts
Colour Code
Colour Code
0.040
(1,02)
Stainless Steel Shroud
B
B
C
C
0.170
(4,32)
0.170
(4,32)
A
A
Male Contact
Material: Brass
Plating: Gold ash over nickel or 0.000050 inch (1.25) gold over copper for military specication contacts
Color Code: Orange/Blue/White for military specication contacts
Visit amphenolpcd.com for more information
10
HIGH DENSITY D-SUB CONTACTS
Female Contact
0.030
(1,76)
Colour Code
Colour Code
A
A
Stainless Steel Shroud
C
B
B
C
0.150
(3,81)
0.150
(3,81)
Dimensions
Part Number Wire Size A B C
AWG mm2inches mm inches mm inches mm
M2000-107294 22, 24, 26, 28 0.3, 0.25, 0.12, 0.08 0.518 13.16 0.035 0.89 0.047 1.19
*M39029/57-354 22, 24, 26, 28 0.3, 0.25, 0.12, .0.08 0.518 13.16 0.035 0.89 0.047 1.19
Dimensions
Part Number Wire Size A B C
AWG mm2inches mm inches mm inches mm
M2000-105794 22, 24, 26, 28 0.3, 0.25, 0.12, .0.08 0.531 13.49 0.035 0.89 0.047 1.19
*M39029/58-360 22, 24, 26, 28 0.3, 0.25, 0.12, .0.08 0.531 13.49 0.035 0.89 0.047 1.19
0.030
(1,76)
Colour Code
Colour Code
A
A
Stainless Steel Shroud
C
B
B
C
0.150
(3,81)
0.150
(3,81)
Material: Copper Alloy
Plating: Gold ash over nickel or 0.000050 inch (1.25) gold over copper for military specication contacts
Color Code: Orange/Green/Yellow for military specication contacts
Material: Copper Alloy
Plating: Gold ash over nickel or 0.000050 inch (1.25) gold over copper for military specication contacts
Color Code: Orange/Blue/Black for military specication contacts
Male Contact
Contact dsubs@amphenolpcd.com 11
CRIMPING
For all tools:
• Strands to be visible through the inspection hole
• Strands not to be visible beyond the insulation support
• Check for peeled gold and bent contact
Correctly Crimped Contact
Wire insulation typical
Strands visible beyond insulation support
Crimp indents too close to inspection hole
Strands not visible through inspection hole
Crimp to meet recommended
tensile strength
Cross Section of Correctly Crimped Contact
8 crimp indents
Stripped wires compressed
for improved conduction
• Amphenol recommended tools for Standard/High Density Series Contact
Visit amphenolpcd.com for more information
12
STANDARD D-SUB TOOLING
Miniature step adjustable tool (M22520/2-01)
Part No. M2000-CRT
This miniature 8 step adjustable hand crimping tool produces
an 8 indent crimp conguration and will crimp wire sizes 18
AWG (1.0mm2) through 32 AWG (0.3mm2) To crimp wire size
18 AWG (1.0mm2), order contact positioner K13-1. To crimp
wire size AWG (0.5mm2 ) through 30 AWG (0.05mm2) order
contact positioner K-13-1. Each positioner is equipped with
a data plate which gives the correct crimp-depth setting for
each wire size and must be used with M22520/2-01 tool frame
for best results when crimping M2000 (M24308) Series con-
tacts.
M81969/39-01
(M2000-107689)
One end of this tool is used to insert contacts into M2000
(M24308) Series connectors. The other end is used to extract
contacts. This is accomplished by sliding the extraction tip
down the wire into the connector until it bottoms against
the contacts. A slight rotation while pushing will release the
contacts, which are then extracted by simultaneously pulling
on the wire.
Insertion/Removal Tool
ALTERNATE METHOD OF
SECURING SHELL HALVES
1.78±1.0
DETAIL B FLOATING
MOUNTING BUSHING
RIVET TO BE ASSEMBLED
WITH SWAGED END ON
BACKSIDE OF ASSEMBLY
OVERALL FREE
FLOAT 0.20±0.10
0.71±0.20
FLOAT FOR MISALIGNMENT
0.78±0.13
3.05±0.25
+0.13
2.18 -0.00
DETAIL D
DUAL FLOATING MOUNTING BUSHING
OVERALL FREE
FLOAT 0.20±0.10
0.71±0.20
FLOAT FOR
MISALIGNMENT
3.30 MAX.
0.78±0.13
+0.13
2.18 -0.00
DETAIL C
REVERSE FLOATING
MOUNTING BUSHING
RIVET TO BE ASSEMBLED
WITH SWAGED END ON
FRONTSIDE OF ASSEMBLY
OVERALL FREE
FLOAT 0.20±0.10
0.71±0.20
FLOAT FOR
MISALIGNMENT
3.05±0.25
0.78±0.13
+0.13
2.18 -0.00
FLOATING MOUNTAIN BUSHING OPTIONS
Contact dsubs@amphenolpcd.com 13
HIGH DENSITY D-SUB TOOLING
Miniature step adjustable tool (M22520/2-01)
Part No. M2000-CRT
This miniature step adjustable hand crimping tool produces an
8 indent crimp conguration and will crimp wire sizes 20 AWG
(0.5mm2) through 32 AWG (0.3mm2) To crimp female con-
tacts, order contact positioner K41. To crimp male contacts,
order contact positioner K42. Each positioner is equipped with
a data plate which gives the correct crimp-depth setting for
each wire size and must be used with M22520/2-01 tool frame
for best results when crimping M2000 (M24308) Series con-
tacts.
(M81969/14-01)
(M2000-105786)
One end of this tool is used to insert contacts into M2000
(M24308) Series connectors. The other end is used to extract
contacts. This is accomplished by sliding the extraction tip
down the wire into the connector until it bottoms against
the contacts. A slight rotation while pushing will release the
contacts, which are then extracted by simultaneously pulling
on the wire.
Insertion/Removal Tool
Visit amphenolpcd.com for more information
14
PANEL CUTOUT
Description:
D-Sub connectors are designed for rack and panel applications. Before making the panel cutout, determine the
number of pins in the connector and whether the connector has a oating bushing, then using the clearance
dimensions provided in gure below, determine whether you are going to front or back mount the connector. Now
make a cutout in the panel using the dimension shown in the dimension table.
• Panel cutout conguration with these dimensions provides clearance for mounting connectors with cable clamp
assemblies.
• When front mounting MIL-DTL-24308 connector using the tab method of securing shell halves, it is recommended
to use a 0.81mm thick washer (not supplied) to prevent deformation of the connector ange.
• The ‘L’ dimension is necessary for full mating of connector halves (ange). This dimension must be taken into con-
sideration when determining the method of mounting, panel thickness etc.
Shell Size Dimensions L
Inches mm
1
.250-.280 6.35-7.11
2
3
.241-.271 6.12-6.88
4
5
6
Contact dsubs@amphenolpcd.com 15
PANEL CUTOUT
Dimensions (mm/in)
Shell
Size
Standard
Density
Contacts
High Density
Contacts
Mounting
A B C D E F G H J K
Front/Rear Floating
Bushing
1 09 15
Front
With
24.99
(0.984)
12.50
(0.492)
23.01
(.906)
11.51
(.453)
13.84
(.545)
6.93
(.273)
2.24
(.088) - -
2.11
(0.038)
Without 22.20
(.874)
11.10
(.437)
13.03
(.513)
6.53
(.257)
3.05
(.120) - -
Rear
With 21.29
(.838)
10.64
(.419)
12.22
(.481)
6.12
(.241)
2.24
(.088)
8.43
(.332)
16.81
(.662) 3.35
(.132)
Without 20.47
(.806)
10.24
(.403)
11.40
(.449)
5.72
(.225)
3.05
(.120)
7.62
(.033)
16.00
(.630)
2 15 26
Front
With
33.32
(1.312)
16.66
(o.656)
31.34
(1.234)
15.67
(.617)
13.84
(.545)
6.93
(.273)
2.24
(.088) - -
2.11
(0.083)
Without 30.53
(1.202)
15.27
(.601)
13.03
(.513)
6.53
(.257)
3.05
(.120) - -
Rear
With 29.62
(1.166)
14.81
(.583)
12.22
(.481)
6.12
(.241)
2.24
(.088)
16.89
(.665)
16.81
(.662) 3.35
(.132)
Without 28.80
(1.134)
14.40
(.567)
11.40
(.449)
5.72
(.225)
3.05
(.120)
15.82
(.623)
16.00
(.630
3 25 44
Front
With
47.04
(1.842)
23.52
(0.926)
45.09
(1.775)
22.55
(.888)
13.84
(.545)
6.93
(.273)
2.24
(.088) - - 2.11
(0.083)
Without 44.27
(1.743)
22.15
(.872)
13.03
(.513)
6.53
(.257)
3.05
(.120) - -
Rear
With 43.33
(1.706)
21.67
(.853)
12.22
(.481)
6.12
(.241)
2.24
(.088)
30.04
(1.197)
16.81
(.662) 3.35
(.132)
Without 42.52
(1.674)
21.26
(.837)
11.40
(.449)
5.72
(.225)
3.05
(.120)
29.59
(1.165)
16.00
(.630)
4 37 62
Front
With
63.50
(2.500)
31.75
(1.250)
61.17
(2.423)
30.78
(1.212)
13.84
(.545)
6.93
(.273)
2.24
(.088) - -
2.11
(0.083)
Without 60.73
(2.391)
30.38
(1.196)
13.03
(.513)
6.53
(.257)
3.05
(.120) - -
Rear
With 59.79
(2.354)
29.90
(1.777)
12.22
(.481)
6.12
(.241)
2.24
(.088)
46.86
(1.845)
16.81
(.662) 3.35
(.132)
Without 59.08
(2.326)
29.54
(1.163)
11.40
(.449)
5.72
(.225)
3.05
(.120)
46.05
(1.813)
16.00
(.630)
5 50 78
Front
With
61.11
(2.406)
30.56
(1.203)
59.16
(2.326)
29.59
(1.165)
16.64
(.655)
8.33
(.328)
2.24
(.088) - -
2.11
(0.083)
Without 58.34
(2.297)
29.18
(1.149)
15.82
(.623)
7.92
(.312)
3.05
(.120) - -
Rear
With 57.15
(2.250)
28.58
(1.125)
14.91
(.587
7.47
(.294)
2.24
(.088)
44.20
(1.740)
19.61
(.772) 3.35
(.132)
Without 56.34
(2.218)
28.17
(1.109)
14.10
(.555)
7.06
(.278)
3.05
(.120)
43.38
(1.708)
18.80
(.740)
6 - 104
Front
With
63.50
(2.500)
31.75
(1.205)
62.31
(2.453)
31.17
(1.227)
18.21
(.717)
9.12
(.359)
2.24
(.088) - -
2.11
(0.083)
Without 61.49
(2.421)
30.76
(1.211)
17.40
(.685)
8.71
(.343)
3.05
(.120) - -
Rear
With 60.66
(2.388)
30.33
(1.194)
16.61
(.654)
8.31
(.327)
2.24
(.088)
47.64
(1.875)
21.21
(.835) 3.35
(.132)
Without 59.84
(2.356)
29.92
(1.179)
15.79
(.622)
7.90
(.311)
3.05
(.120)
46.81
(1.843)
20.40
(.803)
Visit amphenolpcd.com for more information
16
‘H’
‘K’
ø 3.05±0.13
STD-THROUGH HOLE.
MARKED CONN. ON
FRONT SHELL CENTRALLY.
‘A’
‘B’
‘C’
‘D’
PIN 1
ø3.05±0.13
(2 HOLES)
‘E’
‘L’
‘G’
‘J’
3.63 MIN.
9.53 MAX.
3.30 REF.
FLOAT MOUNTING TYPE
STANDARD DENSITY CRIMP-RECEPTACLE
Dimensions (mm)
Shell Size Standard Density
Contacts A B C D E F G H J K L
1 09 30.43
31.19
16.21
16.46
24.87
25.1
7.67
8.03
12.17
12.93 10.64
11.15
6.05
6.30
19.02
19.53
10.46
10.97 0.89
1.52
0.51
1.02
2 15 38.76
39.52
24.54
24.79
33.20
33.45
27.25
27.76
0.51
1.02
3 25 52.65
53.42
38.25
38.51
46.91
47.17
41.02
41.53
0.74
1.25
4 37 68.94
69.70
54.71
54.97
63.37
63.63
57.45
57.96
0.74
1.25
5 50 66.55
67.31
52.30
52.55
60.99 min
61.24
10.62
10.87
14.99
15.75
55.07
55.58
13.31
13.82
0.74
1.25
* Dimensions A-L: Top # min., Bottom # max.
*Contacts shown for reference only
M24308 /2 284 F
Military Designation
Connector Type Dash Number Finish
2 - Receptacle Crimp Type Connector
4 - Plug Crimp Type Connector
6 - Receptacle Crimp Type Connector
(With Nonmagnetic Shell)
8 - Plug Crimp Type Connector (With
Nonmagnetic Shell)
Refer to Approved QPL Listing
table starting on pgs. 32-41/42-50
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Black
None- Nickel
*
Contact dsubs@amphenolpcd.com 17
HIGH DENSITY CRIMP-RECEPTACLE
Dimensions (mm)
Shell Size High Density
Contacts A B C D E F G H J K L
1 15 30.43
31.19
16.21
16.46
24.87
25.12
7.67
8.03
12.17
12.93
10.64
11.15
6.05
6.30
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
2 26 38.76
39.52
24.54
24.79
33.20
33.45
27.25
27.76
0.51
1.02
3 44 52.65
53.42
38.25
38.51
46.91
47.17
41.02
41.53
0.74
1.25
4 62 68.94
69.70
54.71
54.97
63.37
63.63
57.45
57.96
0.74
1.25
5 78 66.55
67.31
52.30
52.55
60.99
61.24
10.62
10.87
14.99
15.75
55.07
55.58
13.31
13.82
0.74
1.25
6 104 68.94
69.70
55.47
55.73
63.37
63.63
12.19
12.45
16.59
17.35
58.22
58.72
14.88
15.39
0.74
1.25
* Dimensions A-L: Top # min., Bottom # max.
D-Sub Receptacle Assembly w/ Crimp Socket Contact
‘H’
3.30 REF.
FLOAT MOUNTING TYPE
‘K’
ø 3.05±0.13
STD–THROUGH HOLE.
MARKED CONN. ON
FRONT SHELL CENTRALLY.
‘E’
‘L’
‘F’
‘G’
‘J’
3.63 MIN.
9.53 MAX.
‘B’
‘D’
PIN 1
ø3.05±0.13
(2 HOLES)
‘A’
‘C’
*Contacts shown for reference only
*
Visit amphenolpcd.com for more information
18
STANDARD DENSITY CRIMP-PLUG
D
Y
‘H’
‘K’
ø 3.05±0.13
STD–THROUGH HOLE.
MARKED CONN. ON
FRONT SHELL CENTRALLY.
‘A’
‘C’
‘B’
‘D’
PIN 1
ø3.05±0.13
(2 HOLES)
‘E’
‘L’
‘F’
‘G’
‘J’
NOTE 1
9.53 MAX.
FLOAT MOUNTING TYPE
3.30 REF.
Dimensions (mm)
Shell Size Standard Density
Contacts A B C D E F G H J K L
1 09 30.43
31.19
16.79
17.04
24.87
25.12
8.23 12.17
12.93
10.46
10.97
5.82
6.12
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
2 15 38.76
39.52
25.12
25.37
33.20
33.45
27.25
27.76
3 25 52.65
53.42
38.84
39.09
46.91
47.17
10.57
11.07
5.69
5.99
41.02
41.53
1.27
1.78
1.27
1.78
4 37 68.94
69.70
55.30
55.55
63.37
63.63
57.45
57.96
5 50 66.55
67.31
52.68
52.93
60.99
61.24
11.07
11.33
14.99
15.75
55.07
55.58
13.31
13.82
D-Sub Plug Assembly w/ Crimp Pin Contact
* Dimensions A-L: Top # min., Bottom # max.
Note 1: Dimensions are 3.94 mm minimum (for size 3, 4, 5) and 4.17 mm minimum (for size 1, 2)
*Contacts shown for reference only
*
Contact dsubs@amphenolpcd.com 19
HIGH DENSITY CRIMP-PLUG
‘A’
‘C’
‘B’
‘D’
PIN 1
ø3.05±0.13
(2 HOLES)
‘E’
‘L’
‘F’
‘G’
‘J’
NOTE 1
9.53 MAX.
FLOAT MOUNTING TYPE
3.30 REF.
‘H’
MARKED CONN. ON
FRONT SHELL CENTRALLY.
‘K’
ø 3.05±0.13
STD–THROUGH HOLE.
Dimensions (mm)
Shell Size High Density
Contacts A B C D E F G H J K L
1 15 30.43
31.19
16.79
17.04
24.87
25.12
8.23
8.48
12.17
12.93
10.64
10.97
5.82
6.12
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
2 26 38.76
39.52
25.12
25.37
33.20
33.45
27.25
27.76
3 44 52.65
53.42
38.84
39.09
46.91
47.17
10.57
11.07
5.99
5.69
41.02
41.53
1.27
1.78
0.74
1.25
4 62 68.94
69.70
55.30
55.55
63.37
63.63
57.45
57.96
5 78 66.55
67.31
52.68
52.93
60.99
61.24
11.07
11.33
14.99
15.75
55.07
55.58
13.31
13.82
6 104 68.94
69.70
56.06
56.31
63.37
63.63
12.65
12.90
16.59
17.35
58.22
58.72
14.88
15.39
D-Sub Plug Assembly w/ Crimp Pin Contact
* Dimensions A-L: Top # min., Bottom # max.
Note 1: Dimensions are 3.94 mm minimum (for size 3, 4, 5) and 4.17 mm minimum (for size 1, 2)
*Contacts shown for reference only
*
Visit amphenolpcd.com for more information
20
STANDARD DENSITY SOLDER CUP-RECEPTACLE
‘H’
MARKED CONN. NO.
CENTRALLY ON
FRONT SHELL
‘K’
ø 3.05±0.13
STD–THROUGH HOLE.
DETAIL A
50 PIN (3 ROWS)
9.91 MAX.
09 TO 37 PIN
‘D’
ø 3.05±0.13
(2 HOLES)
‘E’
‘F’
‘J’
9.91 MAX.
3.78 MIN.
‘A’
‘C’
‘B’
PIN 1
‘L’
‘G’
Dimensions (mm)
Shell Size Standard Density
Contacts A B C D E F G H J K L
1 09 30.43
31.19
16.21
16.46
24.87
25.12
7.67
8.03
12.17
12.93 10.64
11.15
6.05
6.30
19.02
19.53
10.46
10.97 0.89
1.52
0.51
1.02
2 15 38.76
39.52
24.54
24.79
33.20
33.45
27.25
27.76
3 25 52.65
53.42
38.25
38.51
46.91
47.17
41.02
41.53
4 37 68.94
69.70
54.71
54.97
63.37
63.63
57.45
57.96
5 50 66.55
67.31
52.30
52.55
60.99
61.24
10.62
10.87
14.99
15.75
55.07
55.58
13.31
13.82
* Dimensions A-L: Top # min., Bottom # max.
Note 1: Dimensions are 3.94 mm minimum (for size 3, 4, 5) and 4.17 mm minimum (for size 1, 2)
M24308 /1 2 K
Military Designation
Connector Type Dash Number Finish
1 - Receptacle Solder Cup Connector
3 - Plug Solder Cup Connector
5 - Receptacle Solder Cup Connector
(With Nonmagnetic Shell)
7 - Plug Solder Cup Connector (With
Nonmagnetic Shell)
Refer to Approved QPL Listing
table starting on pgs. 31-32/41-42
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Black
None - Nickel
Contact dsubs@amphenolpcd.com 21
STANDARD DENSITY SOLDER CUP-PLUG
9.91 MAX.
50 PIN (3 ROWS)
‘K’
ø 3.05±0.13
STD–THROUGH HOLE.
DETAIL A
‘H’
MARKED CONN. NO.
CENTRALLY ON
FRONT SHELL
‘D’
ø 3.05±0.13
(2 HOLES)
‘A’
‘C’
‘B’
PIN 1 R2.72 TO 2.33
AT BOTTOM
‘E’
‘F’
11.23 MAX.
SEE NOTE 1
‘L’
‘G’
09 TO 37 PIN
‘J’
Dimensions (mm)
Shell Size Standard Density
Contacts A B C D E F G H J K L
1 09 30.43
31.19
16.79
17.04
24.87
25.12
8.23
8.48
12.17
12.93
10.46
10.97
5.82
6.05
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
2 15 38.76
39.52
25.12
25.37
33.20
33.45
27.25
27.76
3 25 52.65
53.42
38.84
39.09
46.91
47.17
10.57
11.07
5.69
5.99
41.02
41.53
1.27
1.78
0.74
1.24
4 37 68.94
69.70
55.30
55.55
63.37
63.63
57.45
57.96
5 50 66.55
67.31
52.68
52.93
60.99
61.24
11.07
11.33
14.99
15.75
55.07
55.58
13.31
13.82
* Dimensions A-L: Top # min., Bottom # max.
Pin Contact
Note 1: Dimensions are 3.81 mm minimum (for size 3, 4, 5) and 4.04 mm minimum (for size 1, 2)
Visit amphenolpcd.com for more information
22
STANDARD DENSITY STRAIGHT PC TAIL-RECEPTACLE
‘D’
ø 3.05±0.13
(2 HOLES)
‘A’
‘C’
‘B’
PIN 1
‘E’
‘F’
6.37 MAX.
SEE NOTE 1
‘L’
‘G’
09 TO 37 PIN
‘J’
ø N
‘X’±0.20
‘Y’±0.20
ø N
50 PIN (3 ROWS)
‘K’
ø 3.05±0.13
STD–THROUGH HOLE.
MARKED CONN. NO.
CENTRALLY ON
FRONT SHELL
‘H’
Dimensions (mm)
Shell Size Standard Density
Contacts A B C D E F G H J K L X Y
1 09 30.43
31.19
16.21
16.46
24.87
25.12
7.77
8.03
12.17
12.93 10.64
11.15
6.06
6.30
19.02
19.53
10.46
10.97 0.89
1.52
0.51
1.02
4.00 4.70
2 15 38.76
39.52
24.54
24.79
33.20
33.45
27.25
27.76
3 25 52.65
53.42
38.25
38.51
46.91
47.17
41.02
41.53
0.74
1.24
4 37 68.94
69.70
54.71
54.97
63.37
63.63
57.45
57.96
5 50 66.55
67.31
52.30
52.55
60.99
61.24
10.62
10.87
14.99
15.75
55.07
55.58
13.31
13.82
* Dimensions A-L: Top # min., Bottom # max.
Note 1: Dimensions are 3.63 mm minimum (for size 1, 2, 3, 4, 5)
M24308 /23 63 Z
Military Designation
Connector Type Dash Number Finish
23: Receptacle Straight/Right Angle PC Tail
24: Plug Straight/Right Angle PC Tail
Refer to Approved QPL Listing
table starting on pgs.
64-74/74-84
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
None- Gold
None- Nickel
K- Zinc Nickel
Contact dsubs@amphenolpcd.com 23
HIGH DENSITY STRAIGHT PC TAIL-RECEPTACLE
(78 PIN)
ø0.51±0.07
‘D’
ø 3.05±0.13
(2 HOLES)
‘A’
‘C’
‘B’
PIN 1
‘E’
‘F’
9.53 MAX.
SEE
NOTE 1
‘L’
‘G’
(15 TO 62 PIN)
‘J’
ø0.51±0.07
‘X’±0.20
‘Y’±0.20
MARKED CONN. NO.
AS CENTRALLY
ON FRONT SHELL
‘K’
ø 3.05±0.13
STD–THROUGH HOLE. ‘H’
Dimensions (mm)
Shell Size High Density
Contacts A B C D E F G H J K L X Y
1 15 30.43
31.19
16.21
16.46
24.87
25.12
7.77
8.03
12.17
12.93 10.64
11.15
6.05
6.30
19.02
19.53
10.46
10.97 0.89
1.52
0.51
1.02 4.00 7.56
2 26 38.76
39.52
24.54
24.79
33.20
33.45
27.25
27.76
3 44 52.65
53.42
38.25
38.51
46.91
47.17
41.02
41.53
4 62 68.94
69.70
54.71
54.97
63.37
63.63
57.45
57.96
5 78 66.55
67.31
52.30
52.55
60.99
61.24
10.62
10.87
14.99
15.75
55.07
55.58
13.31
13.82
* Dimensions A-L: Top # min., Bottom # max.
Note 1: Dimensions are 3.63 mm minimum (for size 1, 2, 3, 4, 5)
Visit amphenolpcd.com for more information
24
STANDARD DENSITY STRAIGHT PC TAIL-PLUG
‘E’
‘F’
6.37 MAX.
SEE
NOTE 1
‘L’
‘G’
09 TO 37 PIN
‘J’
ø N
‘X’±0.20
‘Y’±0.20
ø N
50 PIN (3 ROWS)
‘D’
R2.72 TO 2.33
AT BOTTOM
ø 3.05±0.13
(2 HOLES)
‘A’
‘C’
‘B’
PIN 1
‘K’
ø 3.05±0.13
STD–THROUGH HOLE.
MARKED CONN. NO.
CENTRALLY ON
FRONT SHELL
‘H’
Dimensions (mm)
Shell Size Standard Density
Contacts A B C D E F G H J K L X Y
1 09 30.43
31.19
16.79
17.04
24.87
25.12
8.23
8.48
12.17
12.93
10.46
10.97
5.82
6.05
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
4.00 4.70
2 15 38.76
39.52
25.12
25.37
33.20
33.45
27.25
27.76
3 25 52.65
53.42
38.84
39.09
46.91
47.17
10.57
11.07
5.69
5.99
41.02
41.53
1.27
1.78
0.74
1.24
4 37 68.94
69.70
55.30
55.55
63.37
63.63
57.45
57.96
5 50 66.55
67.31
52.68
52.93
60.99
61.24
11.07
11.33
14.99
15.75
55.07
55.58
13.31
13.82
* Dimensions A-L: Top # min., Bottom # max.
Note 1: Dimensions are 3.81 mm minimum (for size 3, 4, 5) and 4.04 mm minimum (for size 1, 2)
Contact dsubs@amphenolpcd.com 25
HIGH DENSITY STRAIGHT PC TAIL-PLUG
‘D’
R2.72 TO 2.33
AT BOTTOM
ø 3.05±0.13
(2 HOLES)
‘A’
‘C’
‘B’
PIN 1
‘F’
9.53 MAX.
SEE
NOTE 1
‘L’
‘G’
(15 TO 62 PIN)
‘J’
ø0.51±0.07
‘X’±0.20
‘Y’±0.20
‘E’
(78 PIN)
ø0.51±0.07
MARKED CONN. NO.
CENTRALLY ON
FRONT SHELL STD–THROUGH HOLE.
‘K’
ø 3.05±0.13
‘H’
Dimensions (mm)
Shell Size High Density
Contacts A B C D E F G H J K L X Y
1 15 30.43
31.19
16.79
17.04
24.87
25.12
8.23
8.48
12.17
12.93
10.46
10.97
5.82
6.05
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
4.00 7.56
2 26 38.76
39.52
25.12
25.37
33.20
33.45
27.25
27.76
3 44 52.65
53.42
38.84
39.09
46.91
47.17
10.57
11.07
5.69
5.99
41.02
41.53
1.27
1.78
0.74
1.24
4 62 68.94
69.70
55.30
55.55
63.37
63.63
57.45
57.96
5 78 66.55
67.31
52.68
52.93
60.99
61.24
11.07
11.33
14.99
15.75
55.07
55.58
13.31
13.82
* Dimensions A-L: Top # min., Bottom # max.
Note 1: Dimensions are 3.81 mm minimum (for size 3, 4, 5) and 4.04 mm minimum (for size 1, 2)
Visit amphenolpcd.com for more information
26
50 PIN (3 ROWS)
09 TO 37 PIN
‘K’
ø 3.05±0.13
STD–THROUGH HOLE.
MARKED CONN. NO.
CENTRALLY ON
FRONT SHELL
ø N
‘H’
‘D’
‘A’
‘C’
‘B’
PIN 1
ROW 3
ROW 2
ROW 1
PLASTIC
BRACKET
7.19
10.03
12.88
15.09
SEE
NOTE 1
‘F’
‘L’
‘G’
2.84±0.38
PC TAIL
LENGTH
7.19
8.64
10.03
12.29
STANDARD DENSITY RIGHT ANGLE PC TAIL-RECEPTACLE
Dimensions (mm)
Shell Size Standard Density
Contacts A B C D E F G H J K L PC Tail Length
X Y Z
1 09 30.43
31.19
16.21
16.46
24.87
25.12
7.77
8.03
12.17
12.93 10.64
11.15
6.05
6.30
19.02
19.53
10.46
10.97 0.89
1.52
0.51
1.02
3.30
4.70
3.94
5.33
2.51
3.91
2 15 38.76
39.52
24.54
24.79
33.20
33.45
27.25
27.76
3 25 52.65
53.42
38.25
38.51
46.91
47.17
41.02
41.53
0.74
1.24
4 37 68.94
69.70
54.71
54.97
63.37
63.63
57.45
57.96
5 50 66.55
67.31
52.30
52.55
60.99
61.24
10.62
10.87
14.99
15.75
55.07
55.58
13.31
13.82
* Dimensions A-L: Top # min., Bottom # max.
Note 1: Dimensions are 3.63 mm minimum (for size 1, 2, 3, 4, 5)
M24308 /23 257 F
Military Designation
Connector Type Dash Number Finish
23: Receptacle Straight/Right Angle PC Tail type
24: Plug Straight/Right Angle PC Tail type
Refer to Approved QPL
Listing table starting on pgs.
31-32/41-42
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
None- Gold
None- Nickel
K- Zinc Nickel
Contact dsubs@amphenolpcd.com 27
HIGH DENSITY RIGHT ANGLE PC TAIL-RECEPTACLE
78 PIN (4 ROWS)
11.43
13.51
15.59
17.67
20.50
SEE NOTE 1
2.08±0.38
3 PLCS.
ROW 4
ROW 3
ROW 2
ROW 1
PLASTIC
BRACKET
15 TO 62 PIN
‘F’
‘L’
9.53 MAX.
‘G’ 1.98±0.38
2 PLCS.
11.43
13.41
15.39
17.50
ROW 3
ROW 2
ROW 1
PC TAIL
LENGTH
‘D’
‘A’
‘C’
‘B’ PIN 1
‘J’
‘K’
ø 3.05±0.13
STD–THROUGH HOLE.
ø N
‘H’
MARKED CONN. NO.
CENTRALLY ON
FRONT SHELL
Dimensions (mm)
Shell Size High Density
Contacts A B C D E F G H J K L
PC Tail
Length
X
1 15 30.43
31.19
16.21
16.46
24.87
25.12
7.77
8.03
12.17
12.93 10.64
11.15
6.05
6.30
19.02
19.53
10.46
10.97 0.89
1.52
0.51
1.02
2.51
3.91
2 26 38.76
39.52
24.54
24.79
33.20
33.45
27.25
27.76
3 44 52.65
53.42
38.25
38.51
46.91
47.17
41.02
41.53
0.74
1.24
4 62 68.94
69.70
54.71
54.97
63.37
63.63
57.45
57.96
5 78 66.55
67.31
52.30
52.55
60.99
61.24
10.62
10.87
14.99
15.75
55.07
55.58
13.31
13.82
* Dimensions A-L: Top # min., Bottom # max.
Note 1: Dimensions are 3.63 mm minimum (for size 1, 2, 3, 4, 5)
Visit amphenolpcd.com for more information
28
STANDARD DENSITY RIGHT ANGLE PC TAIL-PLUG
50 PIN (3 ROWS)
09 TO 37 PIN
‘K’
ø 3.05±0.13
STD–THROUGH HOLE.
MARKED CONN. NO.
CENTRALLY ON
FRONT SHELL
ø N
‘H’
‘D’
‘A’
‘C’
‘B’
PIN 1
ROW 3
ROW 2
ROW 1
PLASTIC
BRACKET
7.19
10.03
12.88
15.09
SEE
NOTE 1
‘F’
‘L’
‘G’
2.84±0.38
PC TAIL
LENGTH
7.19
8.64
10.03
12.29
Dimensions (mm)
Shell Size Standard Density
Contacts A B C D E F G H J K L PC Tail Length
X Y Z
1 09 30.43
31.19
16.79
17.04
24.87
25.12
8.23
8.48
12.17
12.93
10.46
10.97
5.82
6.05
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
3.30
4.70
3.94
5.33
2.51
3.91
2 15 38.76
39.52
25.12
25.37
33.20
33.45
27.25
27.76
3 25 52.65
53.42
38.84
39.09
46.91
47.17
10.57
11.07
5.69
5.99
41.02
41.53
1.27
1.78
0.74
1.24
4 37 68.94
69.70
55.30
55.55
63.37
63.63
57.45
57.96
5 50 66.55
67.31
52.68
52.93
60.99
61.24
11.07
11.33
14.99
15.75
55.07
55.58
13.31
13.82
* Dimensions A-L: Top # min., Bottom # max.
Note 1: Dimensions are 3.81 mm minimum (for size 3, 4, 5) and 4.04 mm minimum (for size 1, 2)
Contact dsubs@amphenolpcd.com 29
HIGH DENSITY RIGHT ANGLE PC TAIL-PLUG
‘K’
ø 3.05±0.13
STD–THROUGH HOLE.
15 TO 62 PIN
‘F’
‘L’
9.53 MAX.
‘G’ 1.98±0.38
2 PLCS.
11.43
13.41
15.39
17.50
PC TAIL
LENGTH
ø N
‘H’
‘D’
‘A’
‘C’
‘B’
PIN 1
‘J’
78 PIN (4 ROWS)
11.43
13.51
15.59
17.67
20.50
SEE NOTE 1
2.08±0.38
3 PLCS.
ROW 4
ROW 3
ROW 2
ROW 1
PLASTIC
BRACKET
MARKED CONN. NO.
CENTRALLY ON
FRONT SHELL
Dimensions (mm)
Shell Size High Density
Contacts A B C D E F G H J K L PC Tail Length
X
1 15 30.43
31.19
16.79
17.04
24.87
25.12
8.23
8.48
12.17
12.93
10.46
10.97
5.82
6.12
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
2.51
3.91
2 26 38.76
39.52
25.12
25.37
33.20
33.45
27.25
27.76
3 44 52.65
53.42
38.84
39.09
46.91
47.17
10.57
11.07
5.69
5.99
41.02
41.53
1.27
1.78
0.74
1.24
4 62 68.94
69.70
55.30
55.55
63.37
63.63
57.45
57.96
5 78 66.55
67.31
52.68
52.93
60.99
61.24
11.07
11.33
14.99
15.75
55.07
55.58
13.31
13.82
* Dimensions A-L: Top # min., Bottom # max.
Note 1: Dimensions are 3.81 mm minimum (for size 3, 4, 5) and 4.04 mm minimum (for size 1, 2)
Visit amphenolpcd.com for more information
30
PC TAIL APPLICATION DATA & DIMENSIONS
Dimensions (mm)
Dash Number
(M24308/23-)
Application
Board Thickness Nominal Pin Diameter PC Tail Length Pin Diameter (N)
1 to 5 2.39 0.76 4.70
3.30
0.84
0.69
7 to 11 3.18 0.76 5.33
3.94
0.84
0.69
13 to 17 2.39 1.02 4.70
3.30
1.09
0.94
19 to 23 3.18 1.02 5.33
3.94
1.09
0.94
25 to 29 1.57 0.76 3.91
2.51
0.84
0.69
31 to 35 2.39 0.76 4.70
3.30
0.84
0.69
37 to 41 1.57 1.02 3.91
2.51
1.09
0.94
43 to 37 2.39 1.02 4.70
3.30
1.09
0.94
49 to 53 3.18 0.76 5.33
3.94
0.84
0.69
55 to 59 3.18 1.02 5.33
3.94
1.09
0.94
61 to 65 2.39 0.51 4.70
3.30
0.58
0.43
67 to 71 3.18 0.51 8.13
6.99
0.58
0.43
73 to 77 1.57 0.51 3.91
2.51
0.58
0.43
Dimensions (mm)
Dash Number
(M24308/24-)
Application
Board Thickness Nominal Pin Diameter PC Tail Length Pin Diameter (N)
1 to 5 2.39 0.76 4.70
3.30
0.84
0.69
7 to 11 3.18 0.76 5.33
3.94
0.84
0.69
13 to 17 2.39 1.02 4.70
3.30
1.09
0.94
19 to 23 3.18 1.02 5.33
3.94
1.09
0.94
25 to 29 1.57 0.76 3.91
2.51
0.84
0.69
31 to 35 2.39 0.76 4.70
3.30
0.84
0.69
37 to 41 1.57 1.02 3.91
2.51
1.09
0.94
43 to 37 2.39 1.02 4.70
3.30
1.09
0.94
49 to 53 3.18 0.76 5.33
3.94
0.84
0.69
55 to 59 3.18 1.02 5.33
3.94
1.09
0.94
61 to 65 2.39 0.51 4.70
3.30
0.58
0.43
67 to 71 3.18 0.51 8.13
6.99
0.58
0.43
73 to 77 1.57 0.51 3.91
2.51
0.58
0.43
* PC Tail length & Pin Diameter: Top # max., Bottom # min.
30
Contact dsubs@amphenolpcd.com 31
APPROVED QPL LIST
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
M24308/1-12Z M2000/1-12Z Standard 9 Socket N/A Steel Zinc YP 20-21
M24308/1-13Z M2000/1-13Z Standard 15 Socket N/A Steel Zinc YP 20-21
M24308/1-14Z M2000/1-14Z Standard 25 Socket N/A Steel Zinc YP 20-21
M24308/1-15Z M2000/1-15Z Standard 37 Socket N/A Steel Zinc YP 20-21
M24308/1-16Z M2000/1-16Z Standard 50 Socket N/A Steel Zinc YP 20-21
M24308/1-23Z M2000/1-23Z Standard 9 Socket N/A Steel Zinc YP 20-21
M24308/1-24Z M2000/1-24Z Standard 15 Socket N/A Steel Zinc YP 20-21
M24308/1-25Z M2000/1-25Z Standard 25 Socket N/A Steel Zinc YP 20-21
M24308/1-26Z M2000/1-26Z Standard 37 Socket N/A Steel Zinc YP 20-21
M24308/1-27Z M2000/1-27Z Standard 50 Socket N/A Steel Zinc YP 20-21
M24308/1-12K M2000/1-12K Standard 9 Socket N/A Steel Zinc Nickel 20-21
M24308/1-13K M2000/1-13K Standard 15 Socket N/A Steel Zinc Nickel 20-21
M24308/1-14K M2000/1-14K Standard 25 Socket N/A Steel Zinc Nickel 20-21
M24308/1-15K M2000/1-15K Standard 37 Socket N/A Steel Zinc Nickel 20-21
M24308/1-16K M2000/1-16K Standard 50 Socket N/A Steel Zinc Nickel 20-21
M24308/1-23K M2000/1-23K Standard 9 Socket N/A Steel Zinc Nickel 20-21
M24308/1-24K M2000/1-24K Standard 15 Socket N/A Steel Zinc Nickel 20-21
M24308/1-25K M2000/1-25K Standard 25 Socket N/A Steel Zinc Nickel 20-21
M24308/1-26K M2000/1-26K Standard 37 Socket N/A Steel Zinc Nickel 20-21
M24308/1-27K M2000/1-27K Standard 50 Socket N/A Steel Zinc Nickel 20-21
M24308/1-45 M2000/1-45 Standard 9 Socket N/A Steel Nickel 20-21
M24308/1-46 M2000/1-46 Standard 15 Socket N/A Steel Nickel 20-21
M24308/1-47 M2000/1-47 Standard 25 Socket N/A Steel Nickel 20-21
M24308/1-48 M2000/1-48 Standard 37 Socket N/A Steel Nickel 20-21
M24308/1-49 M2000/1-49 Standard 50 Socket N/A Steel Nickel 20-21
M24308/1-56 M2000/1-56 Standard 9 Socket N/A Steel Nickel 20-21
M24308/1-57 M2000/1-57 Standard 15 Socket N/A Steel Nickel 20-21
M24308/1-58 M2000/1-58 Standard 25 Socket N/A Steel Nickel 20-21
M24308/1-59 M2000/1-59 Standard 37 Socket N/A Steel Nickel 20-21
M24308/1-60 M2000/1-60 Standard 50 Socket N/A Steel Nickel 20-21
M24308/1-1F M20000/1-1F Standard 9 Socket N/A Steel Cadmium YP 20-21
M24308/1-2F M20000/1-2F Standard 15 Socket N/A Steel Cadmium YP 20-21
M24308/1-3F M20000/1-3F Standard 25 Socket N/A Steel Cadmium YP 20-21
M24308/1-4F M20000/1-4F Standard 37 Socket N/A Steel Cadmium YP 20-21
M24308/1-5F M20000/1-5F Standard 50 Socket N/A Steel Cadmium YP 20-21
M24308/1-1Z M20000/1-1Z Standard 9 Socket N/A Steel Zinc YP 20-21
M24308/1-2Z M20000/1-2Z Standard 15 Socket N/A Steel Zinc YP 20-21
M24308/1-3Z M20000/1-3Z Standard 25 Socket N/A Steel Zinc YP 20-21
M24308/1-4Z M20000/1-4Z Standard 37 Socket N/A Steel Zinc YP 20-21
M24308/1-5Z M20000/1-5Z Standard 50 Socket N/A Steel Zinc YP 20-21
M24308/1-34 M2000/1-34 Standard 9 Socket N/A Steel Nickel 20-21
M24308/1-35 M2000/1-35 Standard 15 Socket N/A Steel Nickel 20-21
M24308/1-36 M2000/1-36 Standard 25 Socket N/A Steel Nickel 20-21
M24308/1-37 M2000/1-37 Standard 37 Socket N/A Steel Nickel 20-21
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
31
Finish: YP- Yellow Passivation
Visit amphenolpcd.com for more information
32
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/1-38 M2000/1-38 Standard 50 Socket N/A Steel Nickel 20-21
M24308/1-1K M2000/1-1K Standard 9 Socket N/A Steel Zinc Nickel Black 20-21
M24308/1-2K M2000/1-2K Standard 15 Socket N/A Steel Zinc Nickel Black 20-21
M24308/1-3K M2000/1-3K Standard 25 Socket N/A Steel Zinc Nickel Black 20-21
M24308/1-4K M2000/1-4K Standard 37 Socket N/A Steel Zinc Nickel Black 20-21
M24308/1-5K M2000/1-5K Standard 50 Socket N/A Steel Zinc Nickel Black 20-21
M24308/2-1F M2000/2-1F Standard 9 Socket N Steel Cadmium YP 16-19
M24308/2-2F M2000/2-2F Standard 15 Socket N Steel Cadmium YP 16-19
M24308/2-3F M2000/2-3F Standard 25 Socket N Steel Cadmium YP 16-19
M24308/2-4F M2000/2-4F Standard 37 Socket N Steel Cadmium YP 16-19
M24308/2-5F M2000/2-5F Standard 50 Socket N Steel Cadmium YP 16-19
M24308/2-6F M2000/2-6F Standard 9 Socket Y Steel Cadmium YP 16-19
M24308/2-7F M2000/2-7F Standard 15 Socket Y Steel Cadmium YP 16-19
M24308/2-8F M2000/2-8F Standard 25 Socket Y Steel Cadmium YP 16-19
M24308/2-9F M2000/2-9F Standard 37 Socket Y Steel Cadmium YP 16-19
M24308/2-10F M2000/2-10F Standard 50 Socket Y Steel Cadmium YP 16-19
M24308/2-281F M2000/2-281F Standard 9 N N Steel Cadmium YP 16-19
M24308/2-282F M2000/2-282F Standard 15 N N Steel Cadmium YP 16-19
M24308/2-283F M2000/2-283F Standard 25 N N Steel Cadmium YP 16-19
M24308/2-284F M2000/2-284F Standard 37 N N Steel Cadmium YP 16-19
M24308/2-285F M2000/2-285F Standard 50 N N Steel Cadmium YP 16-19
M24308/2-11F M2000/2-11F High Density 15 Socket N Steel Cadmium YP 16-19
M24308/2-12F M2000/2-12F High Density 26 Socket N Steel Cadmium YP 16-19
M24308/2-13F M2000/2-13F High Density 44 Socket N Steel Cadmium YP 16-19
M24308/2-14F M2000/2-14F High Density 62 Socket N Steel Cadmium YP 16-19
M24308/2-15F M2000/2-15F High Density 78 Socket N Steel Cadmium YP 16-19
M24308/2-16F M2000/2-16F High Density 104 Socket N Steel Cadmium YP 16-19
M24308/2-17F M2000/2-17F High Density 15 Socket Y Steel Cadmium YP 16-19
M24308/2-18F M2000/2-18F High Density 26 Socket Y Steel Cadmium YP 16-19
M24308/2-19F M2000/2-19F High Density 44 Socket Y Steel Cadmium YP 16-19
M24308/2-20F M2000/2-20F High Density 62 Socket Y Steel Cadmium YP 16-19
M24308/2-21F M2000/2-21F High Density 78 Socket Y Steel Cadmium YP 16-19
M24308/2-22F M2000/2-22F High Density 104 Socket Y Steel Cadmium YP 16-19
M24308/2-286F M2000/2-286F High Density 15 N N Steel Cadmium YP 16-19
M24308/2-287F M2000/2-287F High Density 26 N N Steel Cadmium YP 16-19
M24308/2-288F M2000/2-288F High Density 44 N N Steel Cadmium YP 16-19
M24308/2-289F M2000/2-289F High Density 62 N N Steel Cadmium YP 16-19
M24308/2-290F M2000/2-290F High Density 78 N N Steel Cadmium YP 16-19
M24308/2-291F M2000/2-291F High Density 104 N N Steel Cadmium YP 16-19
M24308/2-1Z M2000/2-1Z Standard 9 Socket N Steel Zinc YP 16-19
M24308/2-2Z M2000/2-2Z Standard 15 Socket N Steel Zinc YP 16-19
M24308/2-3Z M2000/2-3Z Standard 25 Socket N Steel Zinc YP 16-19
M24308/2-4Z M2000/2-4Z Standard 37 Socket N Steel Zinc YP 16-19
M24308/2-5Z M2000/2-5Z Standard 50 Socket N Steel Zinc YP 16-19
M24308/2-6Z M2000/2-6Z Standard 9 Socket Y Steel Zinc YP 16-19
M24308/2-7Z M2000/2-7Z Standard 15 Socket Y Steel Zinc YP 16-19
Contact dsubs@amphenolpcd.com 33
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/2-8Z M2000/2-8Z Standard 25 Socket Y Steel Zinc YP 16-19
M24308/2-9Z M2000/2-9Z Standard 37 Socket Y Steel Zinc YP 16-19
M24308/2-10Z M2000/2-10Z Standard 50 Socket Y Steel Zinc YP 16-19
M24308/2-281Z M2000/2-281Z Standard 9 N N Steel Zinc YP 16-19
M24308/2-282Z M2000/2-282Z Standard 15 N N Steel Zinc YP 16-19
M24308/2-283Z M2000/2-283Z Standard 25 N N Steel Zinc YP 16-19
M24308/2-284Z M2000/2-284Z Standard 37 N N Steel Zinc YP 16-19
M24308/2-285Z M2000/2-285Z Standard 50 N N Steel Zinc YP 16-19
M24308/2-11Z M2000/2-11Z High Density 15 Socket N Steel Zinc YP 16-19
M24308/2-12Z M2000/2-12Z High Density 26 Socket N Steel Zinc YP 16-19
M24308/2-13Z M2000/2-13Z High Density 44 Socket N Steel Zinc YP 16-19
M24308/2-14Z M2000/2-14Z High Density 62 Socket N Steel Zinc YP 16-19
M24308/2-15Z M2000/2-15Z High Density 78 Socket N Steel Zinc YP 16-19
M24308/2-16Z M2000/2-16Z High Density 104 Socket N Steel Zinc YP 16-19
M24308/2-17Z M2000/2-17Z High Density 15 Socket Y Steel Zinc YP 16-19
M24308/2-18Z M2000/2-18Z High Density 26 Socket Y Steel Zinc YP 16-19
M24308/2-19Z M2000/2-19Z High Density 44 Socket Y Steel Zinc YP 16-19
M24308/2-20Z M2000/2-20Z High Density 62 Socket Y Steel Zinc YP 16-19
M24308/2-21Z M2000/2-21Z High Density 78 Socket Y Steel Zinc YP 16-19
M24308/2-22Z M2000/2-22Z High Density 104 Socket Y Steel Zinc YP 16-19
M24308/2-286Z M2000/2-286Z High Density 15 N N Steel Zinc YP 16-19
M24308/2-287Z M2000/2-287Z High Density 26 N N Steel Zinc YP 16-19
M24308/2-288Z M2000/2-288Z High Density 44 N N Steel Zinc YP 16-19
M24308/2-289Z M2000/2-289Z High Density 62 N N Steel Zinc YP 16-19
M24308/2-290Z M2000/2-290Z High Density 78 N N Steel Zinc YP 16-19
M24308/2-291Z M2000/2-291Z High Density 104 N N Steel Zinc YP 16-19
M24308/2-1K M2000/2-1K Standard 9 Socket N Steel Zinc Nickel 16-19
M24308/2-2K M2000/2-2K Standard 15 Socket N Steel Zinc Nickel 16-19
M24308/2-3K M2000/2-3K Standard 25 Socket N Steel Zinc Nickel 16-19
M24308/2-4K M2000/2-4K Standard 37 Socket N Steel Zinc Nickel 16-19
M24308/2-5K M2000/2-5K Standard 50 Socket N Steel Zinc Nickel 16-19
M24308/2-6K M2000/2-6K Standard 9 Socket Y Steel Zinc Nickel 16-19
M24308/2-7K M2000/2-7K Standard 15 Socket Y Steel Zinc Nickel 16-19
M24308/2-8K M2000/2-8K Standard 25 Socket Y Steel Zinc Nickel 16-19
M24308/2-9K M2000/2-9K Standard 37 Socket Y Steel Zinc Nickel 16-19
M24308/2-10K M2000/2-10K Standard 50 Socket Y Steel Zinc Nickel 16-19
M24308/2-281K M2000/2-281K Standard 9 N N Steel Zinc Nickel 16-19
M24308/2-282K M2000/2-282K Standard 15 N N Steel Zinc Nickel 16-19
M24308/2-283K M2000/2-283K Standard 25 N N Steel Zinc Nickel 16-19
M24308/2-284K M2000/2-284K Standard 37 N N Steel Zinc Nickel 16-19
M24308/2-285K M2000/2-285K Standard 50 N N Steel Zinc Nickel 16-19
M24308/2-11K M2000/2-11K High Density 15 Socket N Steel Zinc Nickel 16-19
M24308/2-12K M2000/2-12K High Density 26 Socket N Steel Zinc Nickel 16-19
M24308/2-13K M2000/2-13K High Density 44 Socket N Steel Zinc Nickel 16-19
M24308/2-14K M2000/2-14K High Density 62 Socket N Steel Zinc Nickel 16-19
M24308/2-15K M2000/2-15K High Density 78 Socket N Steel Zinc Nickel 16-19
Visit amphenolpcd.com for more information
34
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/2-16K M2000/2-16K High Density 104 Socket N Steel Zinc Nickel 16-19
M24308/2-17K M2000/2-17K High Density 15 Socket Y Steel Zinc Nickel 16-19
M24308/2-18K M2000/2-18K High Density 26 Socket Y Steel Zinc Nickel 16-19
M24308/2-19K M2000/2-19K High Density 44 Socket Y Steel Zinc Nickel 16-19
M24308/2-20K M2000/2-20K High Density 62 Socket Y Steel Zinc Nickel 16-19
M24308/2-21K M2000/2-21K High Density 78 Socket Y Steel Zinc Nickel 16-19
M24308/2-22K M2000/2-22K High Density 104 Socket Y Steel Zinc Nickel 16-19
M24308/2-286K M2000/2-286K High Density 15 N N Steel Zinc Nickel 16-19
M24308/2-287K M2000/2-287K High Density 26 N N Steel Zinc Nickel 16-19
M24308/2-288K M2000/2-288K High Density 44 N N Steel Zinc Nickel 16-19
M24308/2-289K M2000/2-289K High Density 62 N N Steel Zinc Nickel 16-19
M24308/2-290K M2000/2-290K High Density 78 N N Steel Zinc Nickel 16-19
M24308/2-291K M2000/2-291K High Density 104 N N Steel Zinc Nickel 16-19
M24308/2-516 M2000/2-516 Standard 9 Socket N Steel Nickel 16-19
M24308/2-517 M2000/2-517 Standard 15 Socket N Steel Nickel 16-19
M24308/2-518 M2000/2-518 Standard 25 Socket N Steel Nickel 16-19
M24308/2-519 M2000/2-519 Standard 37 Socket N Steel Nickel 16-19
M24308/2-520 M2000/2-520 Standard 50 Socket N Steel Nickel 16-19
M24308/2-521 M2000/2-521 Standard 9 Socket Y Steel Nickel 16-19
M24308/2-522 M2000/2-522 Standard 15 Socket Y Steel Nickel 16-19
M24308/2-523 M2000/2-523 Standard 25 Socket Y Steel Nickel 16-19
M24308/2-524 M2000/2-524 Standard 37 Socket Y Steel Nickel 16-19
M24308/2-525 M2000/2-525 Standard 50 Socket Y Steel Nickel 16-19
M24308/2-560 M2000/2-560 Standard 9 N N Steel Nickel 16-19
M24308/2-561 M2000/2-561 Standard 15 N N Steel Nickel 16-19
M24308/2-562 M2000/2-562 Standard 25 N N Steel Nickel 16-19
M24308/2-563 M2000/2-563 Standard 37 N N Steel Nickel 16-19
M24308/2-564 M2000/2-564 Standard 50 N N Steel Nickel 16-19
M24308/2-526 M2000/2-526 High Density 15 Socket N Steel Nickel 16-19
M24308/2-527 M2000/2-527 High Density 26 Socket N Steel Nickel 16-19
M24308/2-528 M2000/2-528 High Density 44 Socket N Steel Nickel 16-19
M24308/2-529 M2000/2-529 High Density 62 Socket N Steel Nickel 16-19
M24308/2-530 M2000/2-530 High Density 78 Socket N Steel Nickel 16-19
M24308/2-531 M2000/2-531 High Density 104 Socket N Steel Nickel 16-19
M24308/2-532 M2000/2-532 High Density 15 Socket Y Steel Nickel 16-19
M24308/2-533 M2000/2-533 High Density 26 Socket Y Steel Nickel 16-19
M24308/2-534 M2000/2-534 High Density 44 Socket Y Steel Nickel 16-19
M24308/2-535 M2000/2-535 High Density 62 Socket Y Steel Nickel 16-19
M24308/2-536 M2000/2-536 High Density 78 Socket Y Steel Nickel 16-19
M24308/2-537 M2000/2-537 High Density 104 Socket Y Steel Nickel 16-19
M24308/2-565 M2000/2-565 High Density 15 N N Steel Nickel 16-19
M24308/2-566 M2000/2-566 High Density 26 N N Steel Nickel 16-19
M24308/2-567 M2000/2-567 High Density 44 N N Steel Nickel 16-19
M24308/2-568 M2000/2-568 High Density 62 N N Steel Nickel 16-19
M24308/2-569 M2000/2-569 High Density 78 N N Steel Nickel 16-19
M24308/2-570 M2000/2-570 High Density 104 N N Steel Nickel 16-19
Contact dsubs@amphenolpcd.com 35
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/2-23F M2000/2-23F Standard 9 Socket N Steel Cadmium YP 16-19
M24308/2-24F M2000/2-24F Standard 15 Socket N Steel Cadmium YP 16-19
M24308/2-25F M2000/2-25F Standard 25 Socket N Steel Cadmium YP 16-19
M24308/2-26F M2000/2-26F Standard 37 Socket N Steel Cadmium YP 16-19
M24308/2-27F M2000/2-27F Standard 50 Socket N Steel Cadmium YP 16-19
M24308/2-34F M2000/2-34F Standard 9 Socket Y Steel Cadmium YP 16-19
M24308/2-35F M2000/2-35F Standard 15 Socket Y Steel Cadmium YP 16-19
M24308/2-36F M2000/2-36F Standard 25 Socket Y Steel Cadmium YP 16-19
M24308/2-37F M2000/2-37F Standard 37 Socket Y Steel Cadmium YP 16-19
M24308/2-38F M2000/2-38F Standard 50 Socket Y Steel Cadmium YP 16-19
M24308/2-292F M2000/2-292F Standard 9 N N Steel Cadmium YP 16-19
M24308/2-293F M2000/2-293F Standard 15 N N Steel Cadmium YP 16-19
M24308/2-294F M2000/2-294F Standard 25 N N Steel Cadmium YP 16-19
M24308/2-295F M2000/2-295F Standard 37 N N Steel Cadmium YP 16-19
M24308/2-296F M2000/2-296F Standard 50 N N Steel Cadmium YP 16-19
M24308/2-28F M2000/2-28F High Density 15 Socket N Steel Cadmium YP 16-19
M24308/2-29F M2000/2-29F High Density 26 Socket N Steel Cadmium YP 16-19
M24308/2-30F M2000/2-30F High Density 44 Socket N Steel Cadmium YP 16-19
M24308/2-31F M2000/2-31F High Density 62 Socket N Steel Cadmium YP 16-19
M24308/2-32F M2000/2-32F High Density 78 Socket N Steel Cadmium YP 16-19
M24308/2-33F M2000/2-33F High Density 104 Socket N Steel Cadmium YP 16-19
M24308/2-39F M2000/2-39F High Density 15 Socket Y Steel Cadmium YP 16-19
M24308/2-40F M2000/2-40F High Density 26 Socket Y Steel Cadmium YP 16-19
M24308/2-41F M2000/2-41F High Density 44 Socket Y Steel Cadmium YP 16-19
M24308/2-42F M2000/2-42F High Density 62 Socket Y Steel Cadmium YP 16-19
M24308/2-43F M2000/2-43F High Density 78 Socket Y Steel Cadmium YP 16-19
M24308/2-44F M2000/2-44F High Density 104 Socket Y Steel Cadmium YP 16-19
M24308/2-297F M2000/2-297F High Density 15 N N Steel Cadmium YP 16-19
M24308/2-298F M2000/2-298F High Density 26 N N Steel Cadmium YP 16-19
M24308/2-299F M2000/2-299F High Density 44 N N Steel Cadmium YP 16-19
M24308/2-300F M2000/2-300F High Density 62 N N Steel Cadmium YP 16-19
M24308/2-301F M2000/2-301F High Density 78 N N Steel Cadmium YP 16-19
M24308/2-302F M2000/2-302F High Density 104 N N Steel Cadmium YP 16-19
M24308/2-335F M2000/2-335F Standard 25 Socket N Steel Cadmium YP 16-19
M24308/2-336F M2000/2-336F Standard 37 Socket N Steel Cadmium YP 16-19
M24308/2-341F M2000/2-341F Standard 15 Socket N Steel Cadmium YP 16-19
M24308/2-342F M2000/2-342F Standard 9 Socket N Steel Cadmium YP 16-19
M24308/2-343F M2000/2-343F Standard 15 Socket N Steel Cadmium YP 16-19
M24308/2-344F M2000/2-344F Standard 25 Socket N Steel Cadmium YP 16-19
M24308/2-345F M2000/2-345F Standard 37 Socket N Steel Cadmium YP 16-19
M24308/2-346F M2000/2-346F Standard 50 Socket N Steel Cadmium YP 16-19
M24308/2-353F M2000/2-353F Standard 9 Socket Y Steel Cadmium YP 16-19
M24308/2-354F M2000/2-354F Standard 15 Socket Y Steel Cadmium YP 16-19
M24308/2-355F M2000/2-355F Standard 25 Socket Y Steel Cadmium YP 16-19
M24308/2-356F M2000/2-356F Standard 37 Socket Y Steel Cadmium YP 16-19
M24308/2-357F M2000/2-357F Standard 50 Socket Y Steel Cadmium YP 16-19
Visit amphenolpcd.com for more information
36
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/2-482F M2000/2-482F Standard 9 N N Steel Cadmium YP 16-19
M24308/2-483F M2000/2-483F Standard 15 N N Steel Cadmium YP 16-19
M24308/2-484F M2000/2-484F Standard 25 N N Steel Cadmium YP 16-19
M24308/2-485F M2000/2-485F Standard 37 N N Steel Cadmium YP 16-19
M24308/2-486F M2000/2-486F Standard 50 N N Steel Cadmium YP 16-19
M24308/2-347F M2000/2-347F High Density 15 Socket N Steel Cadmium YP 16-19
M24308/2-348F M2000/2-348F High Density 26 Socket N Steel Cadmium YP 16-19
M24308/2-349F M2000/2-349F High Density 44 Socket N Steel Cadmium YP 16-19
M24308/2-350F M2000/2-350F High Density 62 Socket N Steel Cadmium YP 16-19
M24308/2-351F M2000/2-351F High Density 78 Socket N Steel Cadmium YP 16-19
M24308/2-352F M2000/2-352F High Density 104 Socket N Steel Cadmium YP 16-19
M24308/2-358F M2000/2-358F High Density 15 Socket Y Steel Cadmium YP 16-19
M24308/2-359F M2000/2-359F High Density 26 Socket Y Steel Cadmium YP 16-19
M24308/2-360F M2000/2-360F High Density 44 Socket Y Steel Cadmium YP 16-19
M24308/2-361F M2000/2-361F High Density 62 Socket Y Steel Cadmium YP 16-19
M24308/2-362F M2000/2-362F High Density 78 Socket Y Steel Cadmium YP 16-19
M24308/2-363F M2000/2-363F High Density 104 Socket Y Steel Cadmium YP 16-19
M24308/2-487F M2000/2-487F High Density 15 N N Steel Cadmium YP 16-19
M24308/2-488F M2000/2-488F High Density 26 N N Steel Cadmium YP 16-19
M24308/2-489F M2000/2-489F High Density 44 N N Steel Cadmium YP 16-19
M24308/2-490F M2000/2-490F High Density 62 N N Steel Cadmium YP 16-19
M24308/2-491F M2000/2-491F High Density 78 N N Steel Cadmium YP 16-19
M24308/2-492F M2000/2-492F High Density 104 N N Steel Cadmium YP 16-19
M24308/2-509F M2000/2-509F Standard 25 Socket N Steel Cadmium YP 16-19
M24308/2-510F M2000/2-510F Standard 37 Socket N Steel Cadmium YP 16-19
M24308/2-515F M2000/2-515F Standard 15 Socket N Steel Cadmium YP 16-19
M24308/2-23Z M2000/2-23Z Standard 9 Socket N Steel Zinc YP 16-19
M24308/2-24Z M2000/2-24Z Standard 15 Socket N Steel Zinc YP 16-19
M24308/2-25Z M2000/2-25Z Standard 25 Socket N Steel Zinc YP 16-19
M24308/2-26Z M2000/2-26Z Standard 37 Socket N Steel Zinc YP 16-19
M24308/2-27Z M2000/2-27Z Standard 50 Socket N Steel Zinc YP 16-19
M24308/2-34Z M2000/2-34Z Standard 9 Socket Y Steel Zinc YP 16-19
M24308/2-35Z M2000/2-35Z Standard 15 Socket Y Steel Zinc YP 16-19
M24308/2-36Z M2000/2-36Z Standard 25 Socket Y Steel Zinc YP 16-19
M24308/2-37Z M2000/2-37Z Standard 37 Socket Y Steel Zinc YP 16-19
M24308/2-38Z M2000/2-38Z Standard 50 Socket Y Steel Zinc YP 16-19
M24308/2-292Z M2000/2-292Z Standard 9 N N Steel Zinc YP 16-19
M24308/2-293Z M2000/2-293Z Standard 15 N N Steel Zinc YP 16-19
M24308/2-294Z M2000/2-294Z Standard 25 N N Steel Zinc YP 16-19
M24308/2-295Z M2000/2-295Z Standard 37 N N Steel Zinc YP 16-19
M24308/2-296Z M2000/2-296Z Standard 50 N N Steel Zinc YP 16-19
M24308/2-28Z M2000/2-28Z High Density 15 Socket N Steel Zinc YP 16-19
M24308/2-29Z M2000/2-29Z High Density 26 Socket N Steel Zinc YP 16-19
M24308/2-30Z M2000/2-30Z High Density 44 Socket N Steel Zinc YP 16-19
M24308/2-31Z M2000/2-31Z High Density 62 Socket N Steel Zinc YP 16-19
M24308/2-32Z M2000/2-32Z High Density 78 Socket N Steel Zinc YP 16-19
Contact dsubs@amphenolpcd.com 37
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/2-33Z M2000/2-33Z High Density 104 Socket N Steel Zinc YP 16-19
M24308/2-39Z M2000/2-39Z High Density 15 Socket Y Steel Zinc YP 16-19
M24308/2-40Z M2000/2-40Z High Density 26 Socket Y Steel Zinc YP 16-19
M24308/2-41Z M2000/2-41Z High Density 44 Socket Y Steel Zinc YP 16-19
M24308/2-42Z M2000/2-42Z High Density 62 Socket Y Steel Zinc YP 16-19
M24308/2-43Z M2000/2-43Z High Density 78 Socket Y Steel Zinc YP 16-19
M24308/2-44Z M2000/2-44Z High Density 104 Socket Y Steel Zinc YP 16-19
M24308/2-297Z M2000/2-297Z High Density 15 N N Steel Zinc YP 16-19
M24308/2-298Z M2000/2-298Z High Density 26 N N Steel Zinc YP 16-19
M24308/2-299Z M2000/2-299Z High Density 44 N N Steel Zinc YP 16-19
M24308/2-300Z M2000/2-300Z High Density 62 N N Steel Zinc YP 16-19
M24308/2-301Z M2000/2-301Z High Density 78 N N Steel Zinc YP 16-19
M24308/2-302Z M2000/2-302Z High Density 104 N N Steel Zinc YP 16-19
M24308/2-335Z M2000/2-335Z Standard 25 Socket N Steel Zinc YP 16-19
M24308/2-336Z M2000/2-336Z Standard 37 Socket N Steel Zinc YP 16-19
M24308/2-341Z M2000/2-341Z Standard 15 Socket N Steel Zinc YP 16-19
M24308/2-342Z M2000/2-342Z Standard 9 Socket N Steel Zinc YP 16-19
M24308/2-343Z M2000/2-343Z Standard 15 Socket N Steel Zinc YP 16-19
M24308/2-344Z M2000/2-344Z Standard 25 Socket N Steel Zinc YP 16-19
M24308/2-345Z M2000/2-345Z Standard 37 Socket N Steel Zinc YP 16-19
M24308/2-346Z M2000/2-346Z Standard 50 Socket N Steel Zinc YP 16-19
M24308/2-353Z M2000/2-353Z Standard 9 Socket Y Steel Zinc YP 16-19
M24308/2-354Z M2000/2-354Z Standard 15 Socket Y Steel Zinc YP 16-19
M24308/2-355Z M2000/2-355Z Standard 25 Socket Y Steel Zinc YP 16-19
M24308/2-356Z M2000/2-356Z Standard 37 Socket Y Steel Zinc YP 16-19
M24308/2-357Z M2000/2-357Z Standard 50 Socket Y Steel Zinc YP 16-19
M24308/2-482Z M2000/2-482Z Standard 9 N N Steel Zinc YP 16-19
M24308/2-483Z M2000/2-483Z Standard 15 N N Steel Zinc YP 16-19
M24308/2-484Z M2000/2-484Z Standard 25 N N Steel Zinc YP 16-19
M24308/2-485Z M2000/2-485Z Standard 37 N N Steel Zinc YP 16-19
M24308/2-486Z M2000/2-486Z Standard 50 N N Steel Zinc YP 16-19
M24308/2-347Z M2000/2-347Z High Density 15 Socket N Steel Zinc YP 16-19
M24308/2-348Z M2000/2-348Z High Density 26 Socket N Steel Zinc YP 16-19
M24308/2-349Z M2000/2-349Z High Density 44 Socket N Steel Zinc YP 16-19
M24308/2-350Z M2000/2-350Z High Density 62 Socket N Steel Zinc YP 16-19
M24308/2-351Z M2000/2-351Z High Density 78 Socket N Steel Zinc YP 16-19
M24308/2-352Z M2000/2-352Z High Density 104 Socket N Steel Zinc YP 16-19
M24308/2-358Z M2000/2-358Z High Density 15 Socket Y Steel Zinc YP 16-19
M24308/2-359Z M2000/2-359Z High Density 26 Socket Y Steel Zinc YP 16-19
M24308/2-360Z M2000/2-360Z High Density 44 Socket Y Steel Zinc YP 16-19
M24308/2-361Z M2000/2-361Z High Density 62 Socket Y Steel Zinc YP 16-19
M24308/2-362Z M2000/2-362Z High Density 78 Socket Y Steel Zinc YP 16-19
M24308/2-363Z M2000/2-363Z High Density 104 Socket Y Steel Zinc YP 16-19
M24308/2-487Z M2000/2-487Z High Density 15 N N Steel Zinc YP 16-19
M24308/2-488Z M2000/2-488Z High Density 26 N N Steel Zinc YP 16-19
M24308/2-489Z M2000/2-489Z High Density 44 N N Steel Zinc YP 16-19
Visit amphenolpcd.com for more information
38
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/2-490Z M2000/2-490Z High Density 62 N N Steel Zinc YP 16-19
M24308/2-491Z M2000/2-491Z High Density 78 N N Steel Zinc YP 16-19
M24308/2-492Z M2000/2-492Z High Density 104 N N Steel Zinc YP 16-19
M24308/2-509Z M2000/2-509Z Standard 25 Socket N Steel Zinc YP 16-19
M24308/2-510Z M2000/2-510Z Standard 37 Socket N Steel Zinc YP 16-19
M24308/2-515Z M2000/2-515Z Standard 15 Socket N Steel Zinc YP 16-19
M24308/2-23K M2000/2-23K Standard 9 Socket N Steel Zinc Nickel 16-19
M24308/2-24K M2000/2-24K Standard 15 Socket N Steel Zinc Nickel 16-19
M24308/2-25K M2000/2-25K Standard 25 Socket N Steel Zinc Nickel 16-19
M24308/2-26K M2000/2-26K Standard 37 Socket N Steel Zinc Nickel 16-19
M24308/2-27K M2000/2-27K Standard 50 Socket N Steel Zinc Nickel 16-19
M24308/2-34K M2000/2-34K Standard 9 Socket Y Steel Zinc Nickel 16-19
M24308/2-35K M2000/2-35K Standard 15 Socket Y Steel Zinc Nickel 16-19
M24308/2-36K M2000/2-36K Standard 25 Socket Y Steel Zinc Nickel 16-19
M24308/2-37K M2000/2-37K Standard 37 Socket Y Steel Zinc Nickel 16-19
M24308/2-38K M2000/2-38K Standard 50 Socket Y Steel Zinc Nickel 16-19
M24308/2-292K M2000/2-292K Standard 9 N N Steel Zinc Nickel 16-19
M24308/2-293K M2000/2-293K Standard 15 N N Steel Zinc Nickel 16-19
M24308/2-294K M2000/2-294K Standard 25 N N Steel Zinc Nickel 16-19
M24308/2-295K M2000/2-295K Standard 37 N N Steel Zinc Nickel 16-19
M24308/2-296K M2000/2-296K Standard 50 N N Steel Zinc Nickel 16-19
M24308/2-28K M2000/2-28K High Density 15 Socket N Steel Zinc Nickel 16-19
M24308/2-29K M2000/2-29K High Density 26 Socket N Steel Zinc Nickel 16-19
M24308/2-30K M2000/2-30K High Density 44 Socket N Steel Zinc Nickel 16-19
M24308/2-31K M2000/2-31K High Density 62 Socket N Steel Zinc Nickel 16-19
M24308/2-32K M2000/2-32K High Density 78 Socket N Steel Zinc Nickel 16-19
M24308/2-33K M2000/2-33K High Density 104 Socket N Steel Zinc Nickel 16-19
M24308/2-39K M2000/2-39K High Density 15 Socket Y Steel Zinc Nickel 16-19
M24308/2-40K M2000/2-40K High Density 26 Socket Y Steel Zinc Nickel 16-19
M24308/2-41K M2000/2-41K High Density 44 Socket Y Steel Zinc Nickel 16-19
M24308/2-42K M2000/2-42K High Density 62 Socket Y Steel Zinc Nickel 16-19
M24308/2-43K M2000/2-43K High Density 78 Socket Y Steel Zinc Nickel 16-19
M24308/2-44K M2000/2-44K High Density 104 Socket Y Steel Zinc Nickel 16-19
M24308/2-297K M2000/2-297K High Density 15 N N Steel Zinc Nickel 16-19
M24308/2-298K M2000/2-298K High Density 26 N N Steel Zinc Nickel 16-19
M24308/2-299K M2000/2-299K High Density 44 N N Steel Zinc Nickel 16-19
M24308/2-300K M2000/2-300K High Density 62 N N Steel Zinc Nickel 16-19
M24308/2-301K M2000/2-301K High Density 78 N N Steel Zinc Nickel 16-19
M24308/2-302K M2000/2-302K High Density 104 N N Steel Zinc Nickel 16-19
M24308/2-335K M2000/2-335K Standard 25 Socket N Steel Zinc Nickel 16-19
M24308/2-336K M2000/2-336K Standard 37 Socket N Steel Zinc Nickel 16-19
M24308/2-341K M2000/2-341K Standard 15 Socket N Steel Zinc Nickel 16-19
M24308/2-342K M2000/2-342K Standard 9 Socket N Steel Zinc Nickel 16-19
M24308/2-343K M2000/2-343K Standard 15 Socket N Steel Zinc Nickel 16-19
M24308/2-344K M2000/2-344K Standard 25 Socket N Steel Zinc Nickel 16-19
M24308/2-345K M2000/2-345K Standard 37 Socket N Steel Zinc Nickel 16-19
Contact dsubs@amphenolpcd.com 39
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/2-346K M2000/2-346K Standard 50 Socket N Steel Zinc Nickel 16-19
M24308/2-353K M2000/2-353K Standard 9 Socket Y Steel Zinc Nickel 16-19
M24308/2-354K M2000/2-354K Standard 15 Socket Y Steel Zinc Nickel 16-19
M24308/2-355K M2000/2-355K Standard 25 Socket Y Steel Zinc Nickel 16-19
M24308/2-356K M2000/2-356K Standard 37 Socket Y Steel Zinc Nickel 16-19
M24308/2-357K M2000/2-357K Standard 50 Socket Y Steel Zinc Nickel 16-19
M24308/2-482K M2000/2-482K Standard 9 N N Steel Zinc Nickel 16-19
M24308/2-483K M2000/2-483K Standard 15 N N Steel Zinc Nickel 16-19
M24308/2-484K M2000/2-484K Standard 25 N N Steel Zinc Nickel 16-19
M24308/2-485K M2000/2-485K Standard 37 N N Steel Zinc Nickel 16-19
M24308/2-486K M2000/2-486K Standard 50 N N Steel Zinc Nickel 16-19
M24308/2-347K M2000/2-347K High Density 15 Socket N Steel Zinc Nickel 16-19
M24308/2-348K M2000/2-348K High Density 26 Socket N Steel Zinc Nickel 16-19
M24308/2-349K M2000/2-349K High Density 44 Socket N Steel Zinc Nickel 16-19
M24308/2-350K M2000/2-350K High Density 62 Socket N Steel Zinc Nickel 16-19
M24308/2-351K M2000/2-351K High Density 78 Socket N Steel Zinc Nickel 16-19
M24308/2-352K M2000/2-352K High Density 104 Socket N Steel Zinc Nickel 16-19
M24308/2-358K M2000/2-358K High Density 15 Socket Y Steel Zinc Nickel 16-19
M24308/2-359K M2000/2-359K High Density 26 Socket Y Steel Zinc Nickel 16-19
M24308/2-360K M2000/2-360K High Density 44 Socket Y Steel Zinc Nickel 16-19
M24308/2-361K M2000/2-361K High Density 62 Socket Y Steel Zinc Nickel 16-19
M24308/2-362K M2000/2-362K High Density 78 Socket Y Steel Zinc Nickel 16-19
M24308/2-363K M2000/2-363K High Density 104 Socket Y Steel Zinc Nickel 16-19
M24308/2-487K M2000/2-487K High Density 15 N N Steel Zinc Nickel 16-19
M24308/2-488K M2000/2-488K High Density 26 N N Steel Zinc Nickel 16-19
M24308/2-489K M2000/2-489K High Density 44 N N Steel Zinc Nickel 16-19
M24308/2-490K M2000/2-490K High Density 62 N N Steel Zinc Nickel 16-19
M24308/2-491K M2000/2-491K High Density 78 N N Steel Zinc Nickel 16-19
M24308/2-492K M2000/2-492K High Density 104 N N Steel Zinc Nickel 16-19
M24308/2-509K M2000/2-509K Standard 25 Socket N Steel Zinc Nickel 16-19
M24308/2-510K M2000/2-510K Standard 37 Socket N Steel Zinc Nickel 16-19
M24308/2-515K M2000/2-515K Standard 15 Socket N Steel Zinc Nickel 16-19
M24308/2-538 M2000/2-538 Standard 9 Socket N Steel Nickel 16-19
M24308/2-539 M2000/2-539 Standard 15 Socket N Steel Nickel 16-19
M24308/2-540 M2000/2-540 Standard 25 Socket N Steel Nickel 16-19
M24308/2-541 M2000/2-541 Standard 37 Socket N Steel Nickel 16-19
M24308/2-542 M2000/2-542 Standard 50 Socket N Steel Nickel 16-19
M24308/2-549 M2000/2-549 Standard 9 Socket Y Steel Nickel 16-19
M24308/2-550 M2000/2-550 Standard 15 Socket Y Steel Nickel 16-19
M24308/2-551 M2000/2-551 Standard 25 Socket Y Steel Nickel 16-19
M24308/2-552 M2000/2-552 Standard 37 Socket Y Steel Nickel 16-19
M24308/2-553 M2000/2-553 Standard 50 Socket Y Steel Nickel 16-19
M24308/2-571 M2000/2-571 Standard 9 N N Steel Nickel 16-19
M24308/2-572 M2000/2-572 Standard 15 N N Steel Nickel 16-19
M24308/2-573 M2000/2-573 Standard 25 N N Steel Nickel 16-19
M24308/2-574 M2000/2-574 Standard 37 N N Steel Nickel 16-19
Visit amphenolpcd.com for more information
40
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/2-575 M2000/2-575 Standard 50 N N Steel Nickel 16-19
M24308/2-543 M2000/2-543 High Density 15 Socket N Steel Nickel 16-19
M24308/2-544 M2000/2-544 High Density 26 Socket N Steel Nickel 16-19
M24308/2-545 M2000/2-545 High Density 44 Socket N Steel Nickel 16-19
M24308/2-546 M2000/2-546 High Density 62 Socket N Steel Nickel 16-19
M24308/2-547 M2000/2-547 High Density 78 Socket N Steel Nickel 16-19
M24308/2-548 M2000/2-548 High Density 104 Socket N Steel Nickel 16-19
M24308/2-554 M2000/2-554 High Density 15 Socket Y Steel Nickel 16-19
M24308/2-555 M2000/2-555 High Density 26 Socket Y Steel Nickel 16-19
M24308/2-556 M2000/2-556 High Density 44 Socket Y Steel Nickel 16-19
M24308/2-557 M2000/2-557 High Density 62 Socket Y Steel Nickel 16-19
M24308/2-558 M2000/2-558 High Density 78 Socket Y Steel Nickel 16-19
M24308/2-559 M2000/2-559 High Density 104 Socket Y Steel Nickel 16-19
M24308/2-576 M2000/2-576 High Density 15 N N Steel Nickel 16-19
M24308/2-577 M2000/2-577 High Density 26 N N Steel Nickel 16-19
M24308/2-578 M2000/2-578 High Density 44 N N Steel Nickel 16-19
M24308/2-579 M2000/2-579 High Density 62 N N Steel Nickel 16-19
M24308/2-580 M2000/2-580 High Density 78 N N Steel Nickel 16-19
M24308/2-581 M2000/2-581 High Density 104 N N Steel Nickel 16-19
M24308/2-582 M2000/2-582 Standard 25 Socket N Steel Nickel 16-19
M24308/2-583 M2000/2-583 Standard 37 Socket N Steel Nickel 16-19
M24308/2-584 M2000/2-584 Standard 15 Socket N Steel Nickel 16-19
M24308/2-585 M2000/2-585 Standard 9 Socket N Steel Nickel 16-19
M24308/2-586 M2000/2-586 Standard 15 Socket N Steel Nickel 16-19
M24308/2-587 M2000/2-587 Standard 25 Socket N Steel Nickel 16-19
M24308/2-588 M2000/2-588 Standard 37 Socket N Steel Nickel 16-19
M24308/2-589 M2000/2-589 Standard 50 Socket N Steel Nickel 16-19
M24308/2-596 M2000/2-596 Standard 9 Socket Y Steel Nickel 16-19
M24308/2-597 M2000/2-597 Standard 15 Socket Y Steel Nickel 16-19
M24308/2-598 M2000/2-598 Standard 25 Socket Y Steel Nickel 16-19
M24308/2-599 M2000/2-599 Standard 37 Socket Y Steel Nickel 16-19
M24308/2-600 M2000/2-600 Standard 50 Socket Y Steel Nickel 16-19
M24308/2-607 M2000/2-607 Standard 9 N N Steel Nickel 16-19
M24308/2-608 M2000/2-608 Standard 15 N N Steel Nickel 16-19
M24308/2-609 M2000/2-609 Standard 25 N N Steel Nickel 16-19
M24308/2-610 M2000/2-610 Standard 37 N N Steel Nickel 16-19
M24308/2-611 M2000/2-611 Standard 50 N N Steel Nickel 16-19
M24308/2-590 M2000/2-590 High Density 15 Socket N Steel Nickel 16-19
M24308/2-591 M2000/2-591 High Density 26 Socket N Steel Nickel 16-19
M24308/2-592 M2000/2-592 High Density 44 Socket N Steel Nickel 16-19
M24308/2-593 M2000/2-593 High Density 62 Socket N Steel Nickel 16-19
M24308/2-594 M2000/2-594 High Density 78 Socket N Steel Nickel 16-19
M24308/2-595 M2000/2-595 High Density 104 Socket N Steel Nickel 16-19
M24308/2-601 M2000/2-601 High Density 15 Socket Y Steel Nickel 16-19
M24308/2-602 M2000/2-602 High Density 26 Socket Y Steel Nickel 16-19
M24308/2-603 M2000/2-603 High Density 44 Socket Y Steel Nickel 16-19
Contact dsubs@amphenolpcd.com 41
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/2-604 M2000/2-604 High Density 62 Socket Y Steel Nickel 16-19
M24308/2-605 M2000/2-605 High Density 78 Socket Y Steel Nickel 16-19
M24308/2-606 M2000/2-606 High Density 104 Socket Y Steel Nickel 16-19
M24308/2-612 M2000/2-612 High Density 15 N N Steel Nickel 16-19
M24308/2-613 M2000/2-613 High Density 26 N N Steel Nickel 16-19
M24308/2-614 M2000/2-614 High Density 44 N N Steel Nickel 16-19
M24308/2-615 M2000/2-615 High Density 62 N N Steel Nickel 16-19
M24308/2-616 M2000/2-616 High Density 78 N N Steel Nickel 16-19
M24308/2-617 M2000/2-617 High Density 104 N N Steel Nickel 16-19
M24308/2-621 M2000/2-621 Standard 25 Socket N Steel Nickel 16-19
M24308/2-622 M2000/2-622 Standard 37 Socket N Steel Nickel 16-19
M24308/2-627 M2000/2-627 Standard 15 Socket N Steel Nickel 16-19
M24308/3-12Z M2000/3-12Z Standard 9 Pin N/A Steel Zinc YP 20-21
M24308/3-13Z M2000/3-13Z Standard 15 Pin N/A Steel Zinc YP 20-21
M24308/3-14Z M2000/3-14Z Standard 25 Pin N/A Steel Zinc YP 20-21
M24308/3-15Z M2000/3-15Z Standard 37 Pin N/A Steel Zinc YP 20-21
M24308/3-16Z M2000/3-16Z Standard 50 Pin N/A Steel Zinc YP 20-21
M24308/3-17Z M2000/3-17Z Standard 9 Pin N/A Steel Zinc YP 20-21
M24308/3-18Z M2000/3-18Z Standard 15 Pin N/A Steel Zinc YP 20-21
M24308/3-19Z M2000/3-19Z Standard 25 Pin N/A Steel Zinc YP 20-21
M24308/3-20Z M2000/3-20Z Standard 37 Pin N/A Steel Zinc YP 20-21
M24308/3-21Z M2000/3-21Z Standard 50 Pin N/A Steel Zinc YP 20-21
M24308/3-12K M2000/3-12K Standard 9 Pin N/A Steel Zinc Nickel 20-21
M24308/3-13K M2000/3-13K Standard 15 Pin N/A Steel Zinc Nickel 20-21
M24308/3-14K M2000/3-14K Standard 25 Pin N/A Steel Zinc Nickel 20-21
M24308/3-15K M2000/3-15K Standard 37 Pin N/A Steel Zinc Nickel 20-21
M24308/3-16K M2000/3-16K Standard 50 Pin N/A Steel Zinc Nickel 20-21
M24308/3-17K M2000/3-17K Standard 9 Pin N/A Steel Zinc Nickel 20-21
M24308/3-18K M2000/3-18K Standard 15 Pin N/A Steel Zinc Nickel 20-21
M24308/3-19K M2000/3-19K Standard 25 Pin N/A Steel Zinc Nickel 20-21
M24308/3-20K M2000/3-20K Standard 37 Pin N/A Steel Zinc Nickel 20-21
M24308/3-21K M2000/3-21K Standard 50 Pin N/A Steel Zinc Nickel 20-21
M24308/3-34 M2000/3-34 Standard 9 Pin N/A Steel Nickel 20-21
M24308/3-35 M2000/3-35 Standard 15 Pin N/A Steel Nickel 20-21
M24308/3-36 M2000/3-36 Standard 25 Pin N/A Steel Nickel 20-21
M24308/3-37 M2000/3-37 Standard 37 Pin N/A Steel Nickel 20-21
M24308/3-38 M2000/3-38 Standard 50 Pin N/A Steel Nickel 20-21
M24308/3-39 M2000/3-39 Standard 9 Pin N/A Steel Nickel 20-21
M24308/3-40 M2000/3-40 Standard 15 Pin N/A Steel Nickel 20-21
M24308/3-41 M2000/3-41 Standard 25 Pin N/A Steel Nickel 20-21
M24308/3-42 M2000/3-42 Standard 37 Pin N/A Steel Nickel 20-21
M24308/3-43 M2000/3-43 Standard 50 Pin N/A Steel Nickel 20-21
M24308/3-1F M2000/3-1F Standard 9 Pin N/A Steel Cadmium YP 20-21
M24308/3-2F M2000/3-2F Standard 15 Pin N/A Steel Cadmium YP 20-21
M24308/3-3F M2000/3-3F Standard 25 Pin N/A Steel Cadmium YP 20-21
M24308/3-4F M2000/3-4F Standard 37 Pin N/A Steel Cadmium YP 20-21
Visit amphenolpcd.com for more information
42
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/3-5F M2000/3-5F Standard 50 Pin N/A Steel Cadmium YP 20-21
M24308/3-1Z M2000/3-1Z Standard 9 Pin N/A Steel Zinc YP 20-21
M24308/3-2Z M2000/3-2Z Standard 15 Pin N/A Steel Zinc YP 20-21
M24308/3-3Z M2000/3-3Z Standard 25 Pin N/A Steel Zinc YP 20-21
M24308/3-4Z M2000/3-4Z Standard 37 Pin N/A Steel Zinc YP 20-21
M24308/3-5Z M2000/3-5Z Standard 50 Pin N/A Steel Zinc YP 20-21
M24308/3-23 M2000/3-23 Standard 9 Pin N/A Steel Nickel 20-21
M24308/3-24 M2000/3-24 Standard 15 Pin N/A Steel Nickel 20-21
M24308/3-25 M2000/3-25 Standard 25 Pin N/A Steel Nickel 20-21
M24308/3-26 M2000/3-26 Standard 37 Pin N/A Steel Nickel 20-21
M24308/3-27 M2000/3-27 Standard 50 Pin N/A Steel Nickel 20-21
M24308/3-1K M2000/3-1K Standard 9 Pin N/A Steel Zinc Nickel Black 20-21
M24308/3-2K M2000/3-2K Standard 15 Pin N/A Steel Zinc Nickel Black 20-21
M24308/3-3K M2000/3-3K Standard 25 Pin N/A Steel Zinc Nickel Black 20-21
M24308/3-4K M2000/3-4K Standard 37 Pin N/A Steel Zinc Nickel Black 20-21
M24308/3-5K M2000/3-5K Standard 50 Pin N/A Steel Zinc Nickel Black 20-21
M24308/3-5K M2000/4-1F Standard 9 Pin N Steel Cadmium YP 20-21
M24308/4-2F M2000/4-2F Standard 15 Pin N Steel Cadmium YP 16-19
M24308/4-3F M2000/4-3F Standard 25 Pin N Steel Cadmium YP 16-19
M24308/4-4F M2000/4-4F Standard 37 Pin N Steel Cadmium YP 16-19
M24308/4-5F M2000/4-5F Standard 50 Pin N Steel Cadmium YP 16-19
M24308/4-6F M2000/4-6F Standard 9 Pin Y Steel Cadmium YP 16-19
M24308/4-7F M2000/4-7F Standard 15 Pin Y Steel Cadmium YP 16-19
M24308/4-8F M2000/4-8F Standard 25 Pin Y Steel Cadmium YP 16-19
M24308/4-9F M2000/4-9F Standard 37 Pin Y Steel Cadmium YP 16-19
M24308/4-10F M2000/4-10F Standard 50 Pin Y Steel Cadmium YP 16-19
M24308/4-259F M2000/4-259F Standard 9 N N Steel Cadmium YP 16-19
M24308/4-260F M2000/4-260F Standard 15 N N Steel Cadmium YP 16-19
M24308/4-261F M2000/4-261F Standard 25 N N Steel Cadmium YP 16-19
M24308/4-262F M2000/4-262F Standard 37 N N Steel Cadmium YP 16-19
M24308/4-263F M2000/4-263F Standard 50 N N Steel Cadmium YP 16-19
M24308/4-11F M2000/4-11F High Density 15 Pin N Steel Cadmium YP 16-19
M24308/4-12F M2000/4-12F High Density 26 Pin N Steel Cadmium YP 16-19
M24308/4-13F M2000/4-13F High Density 44 Pin N Steel Cadmium YP 16-19
M24308/4-14F M2000/4-14F High Density 62 Pin N Steel Cadmium YP 16-19
M24308/4-15F M2000/4-15F High Density 78 Pin N Steel Cadmium YP 16-19
M24308/4-16F M2000/4-16F High Density 104 Pin N Steel Cadmium YP 16-19
M24308/4-17F M2000/4-17F High Density 15 Pin Y Steel Cadmium YP 16-19
M24308/4-18F M2000/4-18F High Density 26 Pin Y Steel Cadmium YP 16-19
M24308/4-19F M2000/4-19F High Density 44 Pin Y Steel Cadmium YP 16-19
M24308/4-20F M2000/4-20F High Density 62 Pin Y Steel Cadmium YP 16-19
M24308/4-21F M2000/4-21F High Density 78 Pin Y Steel Cadmium YP 16-19
M24308/4-22F M2000/4-22F High Density 104 Pin Y Steel Cadmium YP 16-19
M24308/4-264F M2000/4-264F High Density 15 N N Steel Cadmium YP 16-19
M24308/4-265F M2000/4-265F High Density 26 N N Steel Cadmium YP 16-19
M24308/4-266F M2000/4-266F High Density 44 N N Steel Cadmium YP 16-19
Contact dsubs@amphenolpcd.com 43
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/4-267F M2000/4-267F High Density 62 N N Steel Cadmium YP 16-19
M24308/4-268F M2000/4-268F High Density 78 N N Steel Cadmium YP 16-19
M24308/4-269F M2000/4-269F High Density 104 N N Steel Cadmium YP 16-19
M24308/4-1Z M2000/4-1Z Standard 9 Pin N Steel Zinc YP 16-19
M24308/4-2Z M2000/4-2Z Standard 15 Pin N Steel Zinc YP 16-19
M24308/4-3Z M2000/4-3Z Standard 25 Pin N Steel Zinc YP 16-19
M24308/4-4Z M2000/4-4Z Standard 37 Pin N Steel Zinc YP 16-19
M24308/4-5Z M2000/4-5Z Standard 50 Pin N Steel Zinc YP 16-19
M24308/4-6Z M2000/4-6Z Standard 9 Pin Y Steel Zinc YP 16-19
M24308/4-7Z M2000/4-7Z Standard 15 Pin Y Steel Zinc YP 16-19
M24308/4-8Z M2000/4-8Z Standard 25 Pin Y Steel Zinc YP 16-19
M24308/4-9Z M2000/4-9Z Standard 37 Pin Y Steel Zinc YP 16-19
M24308/4-10Z M2000/4-10Z Standard 50 Pin Y Steel Zinc YP 16-19
M24308/4-259Z M2000/4-259Z Standard 9 N N Steel Zinc YP 16-19
M24308/4-260Z M2000/4-260Z Standard 15 N N Steel Zinc YP 16-19
M24308/4-261Z M2000/4-261Z Standard 25 N N Steel Zinc YP 16-19
M24308/4-262Z M2000/4-262Z Standard 37 N N Steel Zinc YP 16-19
M24308/4-263Z M2000/4-263Z Standard 50 N N Steel Zinc YP 16-19
M24308/4-11Z M2000/4-11Z High Density 15 Pin N Steel Zinc YP 16-19
M24308/4-12Z M2000/4-12Z High Density 26 Pin N Steel Zinc YP 16-19
M24308/4-13Z M2000/4-13Z High Density 44 Pin N Steel Zinc YP 16-19
M24308/4-14Z M2000/4-14Z High Density 62 Pin N Steel Zinc YP 16-19
M24308/4-15Z M2000/4-15Z High Density 78 Pin N Steel Zinc YP 16-19
M24308/4-16Z M2000/4-16Z High Density 104 Pin N Steel Zinc YP 16-19
M24308/4-17Z M2000/4-17Z High Density 15 Pin Y Steel Zinc YP 16-19
M24308/4-18Z M2000/4-18Z High Density 26 Pin Y Steel Zinc YP 16-19
M24308/4-19Z M2000/4-19Z High Density 44 Pin Y Steel Zinc YP 16-19
M24308/4-20Z M2000/4-20Z High Density 62 Pin Y Steel Zinc YP 16-19
M24308/4-21Z M2000/4-21Z High Density 78 Pin Y Steel Zinc YP 16-19
M24308/4-22Z M2000/4-22Z High Density 104 Pin Y Steel Zinc YP 16-19
M24308/4-264Z M2000/4-264Z High Density 15 N N Steel Zinc YP 16-19
M24308/4-265Z M2000/4-265Z High Density 26 N N Steel Zinc YP 16-19
M24308/4-266Z M2000/4-266Z High Density 44 N N Steel Zinc YP 16-19
M24308/4-267Z M2000/4-267Z High Density 62 N N Steel Zinc YP 16-19
M24308/4-268Z M2000/4-268Z High Density 78 N N Steel Zinc YP 16-19
M24308/4-269Z M2000/4-269Z High Density 104 N N Steel Zinc YP 16-19
M24308/4-1K M2000/4-1K Standard 9 Pin N Steel Zinc Nickel 16-19
M24308/4-2K M2000/4-2K Standard 15 Pin N Steel Zinc Nickel 16-19
M24308/4-3K M2000/4-3K Standard 25 Pin N Steel Zinc Nickel 16-19
M24308/4-4K M2000/4-4K Standard 37 Pin N Steel Zinc Nickel 16-19
M24308/4-5K M2000/4-5K Standard 50 Pin N Steel Zinc Nickel 16-19
M24308/4-6K M2000/4-6K Standard 9 Pin Y Steel Zinc Nickel 16-19
M24308/4-7K M2000/4-7K Standard 15 Pin Y Steel Zinc Nickel 16-19
M24308/4-8K M2000/4-8K Standard 25 Pin Y Steel Zinc Nickel 16-19
M24308/4-9K M2000/4-9K Standard 37 Pin Y Steel Zinc Nickel 16-19
M24308/4-10K M2000/4-10K Standard 50 Pin Y Steel Zinc Nickel 16-19
Visit amphenolpcd.com for more information
44
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/4-259K M2000/4-259K Standard 9 N N Steel Zinc Nickel 16-19
M24308/4-260K M2000/4-260K Standard 15 N N Steel Zinc Nickel 16-19
M24308/4-261K M2000/4-261K Standard 25 N N Steel Zinc Nickel 16-19
M24308/4-262K M2000/4-262K Standard 37 N N Steel Zinc Nickel 16-19
M24308/4-263K M2000/4-263K Standard 50 N N Steel Zinc Nickel 16-19
M24308/4-11K M2000/4-11K High Density 15 Pin N Steel Zinc Nickel 16-19
M24308/4-12K M2000/4-12K High Density 26 Pin N Steel Zinc Nickel 16-19
M24308/4-13K M2000/4-13K High Density 44 Pin N Steel Zinc Nickel 16-19
M24308/4-14K M2000/4-14K High Density 62 Pin N Steel Zinc Nickel 16-19
M24308/4-15K M2000/4-15K High Density 78 Pin N Steel Zinc Nickel 16-19
M24308/4-16K M2000/4-16K High Density 104 Pin N Steel Zinc Nickel 16-19
M24308/4-17K M2000/4-17K High Density 15 Pin Y Steel Zinc Nickel 16-19
M24308/4-18K M2000/4-18K High Density 26 Pin Y Steel Zinc Nickel 16-19
M24308/4-19K M2000/4-19K High Density 44 Pin Y Steel Zinc Nickel 16-19
M24308/4-20K M2000/4-20K High Density 62 Pin Y Steel Zinc Nickel 16-19
M24308/4-21K M2000/4-21K High Density 78 Pin Y Steel Zinc Nickel 16-19
M24308/4-22K M2000/4-22K High Density 104 Pin Y Steel Zinc Nickel 16-19
M24308/4-264K M2000/4-264K High Density 15 N N Steel Zinc Nickel 16-19
M24308/4-265K M2000/4-265K High Density 26 N N Steel Zinc Nickel 16-19
M24308/4-266K M2000/4-266K High Density 44 N N Steel Zinc Nickel 16-19
M24308/4-267K M2000/4-267K High Density 62 N N Steel Zinc Nickel 16-19
M24308/4-268K M2000/4-268K High Density 78 N N Steel Zinc Nickel 16-19
M24308/4-269K M2000/4-269K High Density 104 N N Steel Zinc Nickel 16-19
M24308/4-335 M2000/4-335 Standard 9 Pin N Steel Nickel 16-19
M24308/4-336 M2000/4-336 Standard 15 Pin N Steel Nickel 16-19
M24308/4-337 M2000/4-337 Standard 25 Pin N Steel Nickel 16-19
M24308/4-338 M2000/4-338 Standard 37 Pin N Steel Nickel 16-19
M24308/4-339 M2000/4-339 Standard 50 Pin N Steel Nickel 16-19
M24308/4-340 M2000/4-340 Standard 9 Pin Y Steel Nickel 16-19
M24308/4-341 M2000/4-341 Standard 15 Pin Y Steel Nickel 16-19
M24308/4-342 M2000/4-342 Standard 25 Pin Y Steel Nickel 16-19
M24308/4-343 M2000/4-343 Standard 37 Pin Y Steel Nickel 16-19
M24308/4-344 M2000/4-344 Standard 50 Pin Y Steel Nickel 16-19
M24308/4-357 M2000/4-357 Standard 9 N N Steel Nickel 16-19
M24308/4-358 M2000/4-358 Standard 15 N N Steel Nickel 16-19
M24308/4-359 M2000/4-359 Standard 25 N N Steel Nickel 16-19
M24308/4-360 M2000/4-360 Standard 37 N N Steel Nickel 16-19
M24308/4-361 M2000/4-361 Standard 50 N N Steel Nickel 16-19
M24308/4-345 M2000/4-345 High Density 15 Pin N Steel Nickel 16-19
M24308/4-346 M2000/4-346 High Density 26 Pin N Steel Nickel 16-19
M24308/4-347 M2000/4-347 High Density 44 Pin N Steel Nickel 16-19
M24308/4-348 M2000/4-348 High Density 62 Pin N Steel Nickel 16-19
M24308/4-349 M2000/4-349 High Density 78 Pin N Steel Nickel 16-19
M24308/4-350 M2000/4-350 High Density 104 Pin N Steel Nickel 16-19
M24308/4-351 M2000/4-351 High Density 15 Pin Y Steel Nickel 16-19
M24308/4-352 M2000/4-352 High Density 26 Pin Y Steel Nickel 16-19
Contact dsubs@amphenolpcd.com 45
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/4-353 M2000/4-353 High Density 44 Pin Y Steel Nickel 16-19
M24308/4-354 M2000/4-354 High Density 62 Pin Y Steel Nickel 16-19
M24308/4-355 M2000/4-355 High Density 78 Pin Y Steel Nickel 16-19
M24308/4-356 M2000/4-356 High Density 104 Pin Y Steel Nickel 16-19
M24308/4-362 M2000/4-362 High Density 15 N N Steel Nickel 16-19
M24308/4-363 M2000/4-363 High Density 26 N N Steel Nickel 16-19
M24308/4-364 M2000/4-364 High Density 44 N N Steel Nickel 16-19
M24308/4-365 M2000/4-365 High Density 62 N N Steel Nickel 16-19
M24308/4-366 M2000/4-366 High Density 78 N N Steel Nickel 16-19
M24308/4-367 M2000/4-367 High Density 104 N N Steel Nickel 16-19
M24308/4-302F M2000/4-302F Standard 9 Pin N Steel Cadmium YP 16-19
M24308/4-303F M2000/4-303F Standard 15 Pin N Steel Cadmium YP 16-19
M24308/4-304F M2000/4-304F Standard 25 Pin N Steel Cadmium YP 16-19
M24308/4-305F M2000/4-305F Standard 37 Pin N Steel Cadmium YP 16-19
M24308/4-306F M2000/4-306F Standard 50 Pin N Steel Cadmium YP 16-19
M24308/4-313F M2000/4-313F Standard 9 Pin Y Steel Cadmium YP 16-19
M24308/4-314F M2000/4-314F Standard 15 Pin Y Steel Cadmium YP 16-19
M24308/4-315F M2000/4-315F Standard 25 Pin Y Steel Cadmium YP 16-19
M24308/4-316F M2000/4-316F Standard 37 Pin Y Steel Cadmium YP 16-19
M24308/4-317F M2000/4-317F Standard 50 Pin Y Steel Cadmium YP 16-19
M24308/4-324F M2000/4-324F Standard 9 N N Steel Cadmium YP 16-19
M24308/4-325F M2000/4-325F Standard 15 N N Steel Cadmium YP 16-19
M24308/4-326F M2000/4-326F Standard 25 N N Steel Cadmium YP 16-19
M24308/4-327F M2000/4-327F Standard 37 N N Steel Cadmium YP 16-19
M24308/4-328F M2000/4-328F Standard 50 N N Steel Cadmium YP 16-19
M24308/4-307F M2000/4-307F High Density 15 Pin N Steel Cadmium YP 16-19
M24308/4-308F M2000/4-308F High Density 26 Pin N Steel Cadmium YP 16-19
M24308/4-309F M2000/4-309F High Density 44 Pin N Steel Cadmium YP 16-19
M24308/4-310F M2000/4-310F High Density 62 Pin N Steel Cadmium YP 16-19
M24308/4-311F M2000/4-311F High Density 78 Pin N Steel Cadmium YP 16-19
M24308/4-312F M2000/4-312F High Density 104 Pin N Steel Cadmium YP 16-19
M24308/4-318F M2000/4-318F High Density 15 Pin Y Steel Cadmium YP 16-19
M24308/4-319F M2000/4-319F High Density 26 Pin Y Steel Cadmium YP 16-19
M24308/4-320F M2000/4-320F High Density 44 Pin Y Steel Cadmium YP 16-19
M24308/4-321F M2000/4-321F High Density 62 Pin Y Steel Cadmium YP 16-19
M24308/4-322F M2000/4-322F High Density 78 Pin Y Steel Cadmium YP 16-19
M24308/4-323F M2000/4-323F High Density 104 Pin Y Steel Cadmium YP 16-19
M24308/4-329F M2000/4-329F High Density 15 N N Steel Cadmium YP 16-19
M24308/4-330F M2000/4-330F High Density 26 N N Steel Cadmium YP 16-19
M24308/4-331F M2000/4-331F High Density 44 N N Steel Cadmium YP 16-19
M24308/4-332F M2000/4-332F High Density 62 N N Steel Cadmium YP 16-19
M24308/4-333F M2000/4-333F High Density 78 N N Steel Cadmium YP 16-19
M24308/4-334F M2000/4-334F High Density 104 N N Steel Cadmium YP 16-19
M24308/4-435F M2000/4-435F Standard 9 Pin N Steel Cadmium YP 16-19
M24308/4-436F M2000/4-436F Standard 15 Pin N Steel Cadmium YP 16-19
M24308/4-437F M2000/4-437F Standard 25 Pin N Steel Cadmium YP 16-19
Visit amphenolpcd.com for more information
46
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/4-438F M2000/4-438F Standard 37 Pin N Steel Cadmium YP 16-19
M24308/4-439F M2000/4-439F Standard 50 Pin N Steel Cadmium YP 16-19
M24308/4-446F M2000/4-446F Standard 9 Pin Y Steel Cadmium YP 16-19
M24308/4-447F M2000/4-447F Standard 15 Pin Y Steel Cadmium YP 16-19
M24308/4-448F M2000/4-448F Standard 25 Pin Y Steel Cadmium YP 16-19
M24308/4-449F M2000/4-449F Standard 37 Pin Y Steel Cadmium YP 16-19
M24308/4-450F M2000/4-450F Standard 50 Pin Y Steel Cadmium YP 16-19
M24308/4-457F M2000/4-457F Standard 9 N N Steel Cadmium YP 16-19
M24308/4-458F M2000/4-458F Standard 15 N N Steel Cadmium YP 16-19
M24308/4-459F M2000/4-459F Standard 25 N N Steel Cadmium YP 16-19
M24308/4-460F M2000/4-460F Standard 37 N N Steel Cadmium YP 16-19
M24308/4-461F M2000/4-461F Standard 50 N N Steel Cadmium YP 16-19
M24308/4-440F M2000/4-440F High Density 15 Pin N Steel Cadmium YP 16-19
M24308/4-441F M2000/4-441F High Density 26 Pin N Steel Cadmium YP 16-19
M24308/4-442F M2000/4-442F High Density 44 Pin N Steel Cadmium YP 16-19
M24308/4-443F M2000/4-443F High Density 62 Pin N Steel Cadmium YP 16-19
M24308/4-444F M2000/4-444F High Density 78 Pin N Steel Cadmium YP 16-19
M24308/4-445F M2000/4-445F High Density 104 Pin N Steel Cadmium YP 16-19
M24308/4-451F M2000/4-451F High Density 15 Pin Y Steel Cadmium YP 16-19
M24308/4-452F M2000/4-452F High Density 26 Pin Y Steel Cadmium YP 16-19
M24308/4-453F M2000/4-453F High Density 44 Pin Y Steel Cadmium YP 16-19
M24308/4-454F M2000/4-454F High Density 62 Pin Y Steel Cadmium YP 16-19
M24308/4-455F M2000/4-455F High Density 78 Pin Y Steel Cadmium YP 16-19
M24308/4-456F M2000/4-456F High Density 104 Pin Y Steel Cadmium YP 16-19
M24308/4-462F M2000/4-462F High Density 15 N N Steel Cadmium YP 16-19
M24308/4-463F M2000/4-463F High Density 26 N N Steel Cadmium YP 16-19
M24308/4-464F M2000/4-464F High Density 44 N N Steel Cadmium YP 16-19
M24308/4-465F M2000/4-465F High Density 62 N N Steel Cadmium YP 16-19
M24308/4-466F M2000/4-466F High Density 78 N N Steel Cadmium YP 16-19
M24308/4-467F M2000/4-467F High Density 104 N N Steel Cadmium YP 16-19
M24308/4-302Z M2000/4-302Z Standard 9 Pin N Steel Zinc YP 16-19
M24308/4-303Z M2000/4-303Z Standard 15 Pin N Steel Zinc YP 16-19
M24308/4-304Z M2000/4-304Z Standard 25 Pin N Steel Zinc YP 16-19
M24308/4-305Z M2000/4-305Z Standard 37 Pin N Steel Zinc YP 16-19
M24308/4-306Z M2000/4-306Z Standard 50 Pin N Steel Zinc YP 16-19
M24308/4-313Z M2000/4-313Z Standard 9 Pin Y Steel Zinc YP 16-19
M24308/4-314Z M2000/4-314Z Standard 15 Pin Y Steel Zinc YP 16-19
M24308/4-315Z M2000/4-315Z Standard 25 Pin Y Steel Zinc YP 16-19
M24308/4-316Z M2000/4-316Z Standard 37 Pin Y Steel Zinc YP 16-19
M24308/4-317Z M2000/4-317Z Standard 50 Pin Y Steel Zinc YP 16-19
M24308/4-324Z M2000/4-324Z Standard 9 N N Steel Zinc YP 16-19
M24308/4-325Z M2000/4-325Z Standard 15 N N Steel Zinc YP 16-19
M24308/4-326Z M2000/4-326Z Standard 25 N N Steel Zinc YP 16-19
M24308/4-327Z M2000/4-327Z Standard 37 N N Steel Zinc YP 16-19
M24308/4-328Z M2000/4-328Z Standard 50 N N Steel Zinc YP 16-19
M24308/4-307Z M2000/4-307Z High Density 15 Pin N Steel Zinc YP 16-19
Contact dsubs@amphenolpcd.com 47
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/4-308Z M2000/4-308Z High Density 26 Pin N Steel Zinc YP 16-19
M24308/4-309Z M2000/4-309Z High Density 44 Pin N Steel Zinc YP 16-19
M24308/4-310Z M2000/4-310Z High Density 62 Pin N Steel Zinc YP 16-19
M24308/4-311Z M2000/4-311Z High Density 78 Pin N Steel Zinc YP 16-19
M24308/4-312Z M2000/4-312Z High Density 104 Pin N Steel Zinc YP 16-19
M24308/4-318Z M2000/4-318Z High Density 15 Pin Y Steel Zinc YP 16-19
M24308/4-319Z M2000/4-319Z High Density 26 Pin Y Steel Zinc YP 16-19
M24308/4-320Z M2000/4-320Z High Density 44 Pin Y Steel Zinc YP 16-19
M24308/4-321Z M2000/4-321Z High Density 62 Pin Y Steel Zinc YP 16-19
M24308/4-322Z M2000/4-322Z High Density 78 Pin Y Steel Zinc YP 16-19
M24308/4-323Z M2000/4-323Z High Density 104 Pin Y Steel Zinc YP 16-19
M24308/4-329Z M2000/4-329Z High Density 15 N N Steel Zinc YP 16-19
M24308/4-330Z M2000/4-330Z High Density 26 N N Steel Zinc YP 16-19
M24308/4-331Z M2000/4-331Z High Density 44 N N Steel Zinc YP 16-19
M24308/4-332Z M2000/4-332Z High Density 62 N N Steel Zinc YP 16-19
M24308/4-333Z M2000/4-333Z High Density 78 N N Steel Zinc YP 16-19
M24308/4-334Z M2000/4-334Z High Density 104 N N Steel Zinc YP 16-19
M24308/4-435Z M2000/4-435Z Standard 9 Pin N Steel Zinc YP 16-19
M24308/4-436Z M2000/4-436Z Standard 15 Pin N Steel Zinc YP 16-19
M24308/4-437Z M2000/4-437Z Standard 25 Pin N Steel Zinc YP 16-19
M24308/4-438Z M2000/4-438Z Standard 37 Pin N Steel Zinc YP 16-19
M24308/4-439Z M2000/4-439Z Standard 50 Pin N Steel Zinc YP 16-19
M24308/4-446Z M2000/4-446Z Standard 9 Pin Y Steel Zinc YP 16-19
M24308/4-447Z M2000/4-447Z Standard 15 Pin Y Steel Zinc YP 16-19
M24308/4-448Z M2000/4-448Z Standard 25 Pin Y Steel Zinc YP 16-19
M24308/4-449Z M2000/4-449Z Standard 37 Pin Y Steel Zinc YP 16-19
M24308/4-450Z M2000/4-450Z Standard 50 Pin Y Steel Zinc YP 16-19
M24308/4-457Z M2000/4-457Z Standard 9 N N Steel Zinc YP 16-19
M24308/4-458Z M2000/4-458Z Standard 15 N N Steel Zinc YP 16-19
M24308/4-459Z M2000/4-459Z Standard 25 N N Steel Zinc YP 16-19
M24308/4-460Z M2000/4-460Z Standard 37 N N Steel Zinc YP 16-19
M24308/4-461Z M2000/4-461Z Standard 50 N N Steel Zinc YP 16-19
M24308/4-440Z M2000/4-440Z High Density 15 Pin N Steel Zinc YP 16-19
M24308/4-441Z M2000/4-441Z High Density 26 Pin N Steel Zinc YP 16-19
M24308/4-442Z M2000/4-442Z High Density 44 Pin N Steel Zinc YP 16-19
M24308/4-443Z M2000/4-443Z High Density 62 Pin N Steel Zinc YP 16-19
M24308/4-444Z M2000/4-444Z High Density 78 Pin N Steel Zinc YP 16-19
M24308/4-445Z M2000/4-445Z High Density 104 Pin N Steel Zinc YP 16-19
M24308/4-451Z M2000/4-451Z High Density 15 Pin Y Steel Zinc YP 16-19
M24308/4-452Z M2000/4-452Z High Density 26 Pin Y Steel Zinc YP 16-19
M24308/4-453Z M2000/4-453Z High Density 44 Pin Y Steel Zinc YP 16-19
M24308/4-454Z M2000/4-454Z High Density 62 Pin Y Steel Zinc YP 16-19
M24308/4-455Z M2000/4-455Z High Density 78 Pin Y Steel Zinc YP 16-19
M24308/4-456Z M2000/4-456Z High Density 104 Pin Y Steel Zinc YP 16-19
M24308/4-462Z M2000/4-462Z High Density 15 N N Steel Zinc YP 16-19
M24308/4-463Z M2000/4-463Z High Density 26 N N Steel Zinc YP 16-19
Visit amphenolpcd.com for more information
48
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/4-464Z M2000/4-464Z High Density 44 N N Steel Zinc YP 16-19
M24308/4-465Z M2000/4-465Z High Density 62 N N Steel Zinc YP 16-19
M24308/4-466Z M2000/4-466Z High Density 78 N N Steel Zinc YP 16-19
M24308/4-467Z M2000/4-467Z High Density 104 N N Steel Zinc YP 16-19
M24308/4-302K M2000/4-302K Standard 9 Pin N Steel Zinc Nickel 16-19
M24308/4-303K M2000/4-303K Standard 15 Pin N Steel Zinc Nickel 16-19
M24308/4-304K M2000/4-304K Standard 25 Pin N Steel Zinc Nickel 16-19
M24308/4-305K M2000/4-305K Standard 37 Pin N Steel Zinc Nickel 16-19
M24308/4-306K M2000/4-306K Standard 50 Pin N Steel Zinc Nickel 16-19
M24308/4-313K M2000/4-313K Standard 9 Pin Y Steel Zinc Nickel 16-19
M24308/4-314K M2000/4-314K Standard 15 Pin Y Steel Zinc Nickel 16-19
M24308/4-315K M2000/4-315K Standard 25 Pin Y Steel Zinc Nickel 16-19
M24308/4-316K M2000/4-316K Standard 37 Pin Y Steel Zinc Nickel 16-19
M24308/4-317K M2000/4-317K Standard 50 Pin Y Steel Zinc Nickel 16-19
M24308/4-324K M2000/4-324K Standard 9 N N Steel Zinc Nickel 16-19
M24308/4-325K M2000/4-325K Standard 15 N N Steel Zinc Nickel 16-19
M24308/4-326K M2000/4-326K Standard 25 N N Steel Zinc Nickel 16-19
M24308/4-327K M2000/4-327K Standard 37 N N Steel Zinc Nickel 16-19
M24308/4-328K M2000/4-328K Standard 50 N N Steel Zinc Nickel 16-19
M24308/4-307K M2000/4-307K High Density 15 Pin N Steel Zinc Nickel 16-19
M24308/4-308K M2000/4-308K High Density 26 Pin N Steel Zinc Nickel 16-19
M24308/4-309K M2000/4-309K High Density 44 Pin N Steel Zinc Nickel 16-19
M24308/4-310K M2000/4-310K High Density 62 Pin N Steel Zinc Nickel 16-19
M24308/4-311K M2000/4-311K High Density 78 Pin N Steel Zinc Nickel 16-19
M24308/4-312K M2000/4-312K High Density 104 Pin N Steel Zinc Nickel 16-19
M24308/4-318K M2000/4-318K High Density 15 Pin Y Steel Zinc Nickel 16-19
M24308/4-319K M2000/4-319K High Density 26 Pin Y Steel Zinc Nickel 16-19
M24308/4-320K M2000/4-320K High Density 44 Pin Y Steel Zinc Nickel 16-19
M24308/4-321K M2000/4-321K High Density 62 Pin Y Steel Zinc Nickel 16-19
M24308/4-322K M2000/4-322K High Density 78 Pin Y Steel Zinc Nickel 16-19
M24308/4-323K M2000/4-323K High Density 104 Pin Y Steel Zinc Nickel 16-19
M24308/4-329K M2000/4-329K High Density 15 N N Steel Zinc Nickel 16-19
M24308/4-330K M2000/4-330K High Density 26 N N Steel Zinc Nickel 16-19
M24308/4-331K M2000/4-331K High Density 44 N N Steel Zinc Nickel 16-19
M24308/4-332K M2000/4-332K High Density 62 N N Steel Zinc Nickel 16-19
M24308/4-333K M2000/4-333K High Density 78 N N Steel Zinc Nickel 16-19
M24308/4-334K M2000/4-334K High Density 104 N N Steel Zinc Nickel 16-19
M24308/4-435K M2000/4-435K Standard 9 Pin N Steel Zinc Nickel 16-19
M24308/4-436K M2000/4-436K Standard 15 Pin N Steel Zinc Nickel 16-19
M24308/4-437K M2000/4-437K Standard 25 Pin N Steel Zinc Nickel 16-19
M24308/4-438K M2000/4-438K Standard 37 Pin N Steel Zinc Nickel 16-19
M24308/4-439K M2000/4-439K Standard 50 Pin N Steel Zinc Nickel 16-19
M24308/4-446K M2000/4-446K Standard 9 Pin Y Steel Zinc Nickel 16-19
M24308/4-447K M2000/4-447K Standard 15 Pin Y Steel Zinc Nickel 16-19
M24308/4-448K M2000/4-448K Standard 25 Pin Y Steel Zinc Nickel 16-19
M24308/4-449K M2000/4-449K Standard 37 Pin Y Steel Zinc Nickel 16-19
Contact dsubs@amphenolpcd.com 49
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/4-450K M2000/4-450K Standard 50 Pin Y Steel Zinc Nickel 16-19
M24308/4-457K M2000/4-457K Standard 9 N N Steel Zinc Nickel 16-19
M24308/4-458K M2000/4-458K Standard 15 N N Steel Zinc Nickel 16-19
M24308/4-459K M2000/4-459K Standard 25 N N Steel Zinc Nickel 16-19
M24308/4-460K M2000/4-460K Standard 37 N N Steel Zinc Nickel 16-19
M24308/4-461K M2000/4-461K Standard 50 N N Steel Zinc Nickel 16-19
M24308/4-440K M2000/4-440K High Density 15 Pin N Steel Zinc Nickel 16-19
M24308/4-441K M2000/4-441K High Density 26 Pin N Steel Zinc Nickel 16-19
M24308/4-442K M2000/4-442K High Density 44 Pin N Steel Zinc Nickel 16-19
M24308/4-443K M2000/4-443K High Density 62 Pin N Steel Zinc Nickel 16-19
M24308/4-444K M2000/4-444K High Density 78 Pin N Steel Zinc Nickel 16-19
M24308/4-445K M2000/4-445K High Density 104 Pin N Steel Zinc Nickel 16-19
M24308/4-451K M2000/4-451K High Density 15 Pin Y Steel Zinc Nickel 16-19
M24308/4-452K M2000/4-452K High Density 26 Pin Y Steel Zinc Nickel 16-19
M24308/4-453K M2000/4-453K High Density 44 Pin Y Steel Zinc Nickel 16-19
M24308/4-454K M2000/4-454K High Density 62 Pin Y Steel Zinc Nickel 16-19
M24308/4-455K M2000/4-455K High Density 78 Pin Y Steel Zinc Nickel 16-19
M24308/4-456K M2000/4-456K High Density 104 Pin Y Steel Zinc Nickel 16-19
M24308/4-462K M2000/4-462K High Density 15 N N Steel Zinc Nickel 16-19
M24308/4-463K M2000/4-463K High Density 26 N N Steel Zinc Nickel 16-19
M24308/4-464K M2000/4-464K High Density 44 N N Steel Zinc Nickel 16-19
M24308/4-465K M2000/4-465K High Density 62 N N Steel Zinc Nickel 16-19
M24308/4-466K M2000/4-466K High Density 78 N N Steel Zinc Nickel 16-19
M24308/4-467K M2000/4-467K High Density 104 N N Steel Zinc Nickel 16-19
M24308/4-368 M2000/4-368 Standard 9 Pin N Steel Nickel 16-19
M24308/4-369 M2000/4-369 Standard 15 Pin N Steel Nickel 16-19
M24308/4-370 M2000/4-370 Standard 25 Pin N Steel Nickel 16-19
M24308/4-371 M2000/4-371 Standard 37 Pin N Steel Nickel 16-19
M24308/4-372 M2000/4-372 Standard 50 Pin N Steel Nickel 16-19
M24308/4-379 M2000/4-379 Standard 9 Pin Y Steel Nickel 16-19
M24308/4-380 M2000/4-380 Standard 15 Pin Y Steel Nickel 16-19
M24308/4-381 M2000/4-381 Standard 25 Pin Y Steel Nickel 16-19
M24308/4-382 M2000/4-382 Standard 37 Pin Y Steel Nickel 16-19
M24308/4-383 M2000/4-383 Standard 50 Pin Y Steel Nickel 16-19
M24308/4-390 M2000/4-390 Standard 9 N N Steel Nickel 16-19
M24308/4-391 M2000/4-391 Standard 15 N N Steel Nickel 16-19
M24308/4-392 M2000/4-392 Standard 25 N N Steel Nickel 16-19
M24308/4-393 M2000/4-393 Standard 37 N N Steel Nickel 16-19
M24308/4-394 M2000/4-394 Standard 50 N N Steel Nickel 16-19
M24308/4-373 M2000/4-373 High Density 15 Pin N Steel Nickel 16-19
M24308/4-374 M2000/4-374 High Density 26 Pin N Steel Nickel 16-19
M24308/4-375 M2000/4-375 High Density 44 Pin N Steel Nickel 16-19
M24308/4-376 M2000/4-376 High Density 62 Pin N Steel Nickel 16-19
M24308/4-377 M2000/4-377 High Density 78 Pin N Steel Nickel 16-19
M24308/4-378 M2000/4-378 High Density 104 Pin N Steel Nickel 16-19
M24308/4-384 M2000/4-384 High Density 15 Pin Y Steel Nickel 16-19
Visit amphenolpcd.com for more information
50
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/4-385 M2000/4-385 High Density 26 Pin Y Steel Nickel 16-19
M24308/4-386 M2000/4-386 High Density 44 Pin Y Steel Nickel 16-19
M24308/4-387 M2000/4-387 High Density 62 Pin Y Steel Nickel 16-19
M24308/4-388 M2000/4-388 High Density 78 Pin Y Steel Nickel 16-19
M24308/4-389 M2000/4-389 High Density 104 Pin Y Steel Nickel 16-19
M24308/4-395 M2000/4-395 High Density 15 N N Steel Nickel 16-19
M24308/4-396 M2000/4-396 High Density 26 N N Steel Nickel 16-19
M24308/4-397 M2000/4-397 High Density 44 N N Steel Nickel 16-19
M24308/4-398 M2000/4-398 High Density 62 N N Steel Nickel 16-19
M24308/4-399 M2000/4-399 High Density 78 N N Steel Nickel 16-19
M24308/4-400 M2000/4-400 High Density 104 N N Steel Nickel 16-19
M24308/4-401 M2000/4-401 Standard 9 Pin N Steel Nickel 16-19
M24308/4-402 M2000/4-402 Standard 15 Pin N Steel Nickel 16-19
M24308/4-403 M2000/4-403 Standard 25 Pin N Steel Nickel 16-19
M24308/4-404 M2000/4-404 Standard 37 Pin N Steel Nickel 16-19
M24308/4-405 M2000/4-405 Standard 50 Pin N Steel Nickel 16-19
M24308/4-412 M2000/4-412 Standard 9 Pin Y Steel Nickel 16-19
M24308/4-413 M2000/4-413 Standard 15 Pin Y Steel Nickel 16-19
M24308/4-414 M2000/4-414 Standard 25 Pin Y Steel Nickel 16-19
M24308/4-415 M2000/4-415 Standard 37 Pin Y Steel Nickel 16-19
M24308/4-416 M2000/4-416 Standard 50 Pin Y Steel Nickel 16-19
M24308/4-423 M2000/4-423 Standard 9 N N Steel Nickel 16-19
M24308/4-424 M2000/4-424 Standard 15 N N Steel Nickel 16-19
M24308/4-425 M2000/4-425 Standard 25 N N Steel Nickel 16-19
M24308/4-426 M2000/4-426 Standard 37 N N Steel Nickel 16-19
M24308/4-427 M2000/4-427 Standard 50 N N Steel Nickel 16-19
M24308/4-406 M2000/4-406 High Density 15 Pin N Steel Nickel 16-19
M24308/4-407 M2000/4-407 High Density 26 Pin N Steel Nickel 16-19
M24308/4-408 M2000/4-408 High Density 44 Pin N Steel Nickel 16-19
M24308/4-409 M2000/4-409 High Density 62 Pin N Steel Nickel 16-19
M24308/4-410 M2000/4-410 High Density 78 Pin N Steel Nickel 16-19
M24308/4-411 M2000/4-411 High Density 104 Pin N Steel Nickel 16-19
M24308/4-417 M2000/4-417 High Density 15 Pin Y Steel Nickel 16-19
M24308/4-418 M2000/4-418 High Density 26 Pin Y Steel Nickel 16-19
M24308/4-419 M2000/4-419 High Density 44 Pin Y Steel Nickel 16-19
M24308/4-420 M2000/4-420 High Density 62 Pin Y Steel Nickel 16-19
M24308/4-421 M2000/4-421 High Density 78 Pin Y Steel Nickel 16-19
M24308/4-422 M2000/4-422 High Density 104 Pin Y Steel Nickel 16-19
M24308/4-428 M2000/4-428 High Density 15 N N Steel Nickel 16-19
M24308/4-429 M2000/4-429 High Density 26 N N Steel Nickel 16-19
M24308/4-430 M2000/4-430 High Density 44 N N Steel Nickel 16-19
M24308/4-431 M2000/4-431 High Density 62 N N Steel Nickel 16-19
M24308/4-432 M2000/4-432 High Density 78 N N Steel Nickel 16-19
M24308/4-433 M2000/4-433 High Density 104 N N Steel Nickel 16-19
M24308/5-45 M2000/5-45 Standard 9 Socket N/A Brass Gold Plated 20-21
M24308/5-46 M2000/5-46 Standard 15 Socket N/A Brass Gold Plated 20-21
Contact dsubs@amphenolpcd.com 51
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/5-47 M2000/5-47 Standard 25 Socket N/A Brass Gold Plated 20-21
M24308/5-48 M2000/5-48 Standard 37 Socket N/A Brass Gold Plated 20-21
M24308/5-49 M2000/5-49 Standard 50 Socket N/A Brass Gold Plated 20-21
M24308/5-56 M2000/5-56 Standard 9 Socket N/A Brass Gold Plated 20-21
M24308/5-57 M2000/5-57 Standard 15 Socket N/A Brass Gold Plated 20-21
M24308/5-58 M2000/5-58 Standard 25 Socket N/A Brass Gold Plated 20-21
M24308/5-59 M2000/5-59 Standard 37 Socket N/A Brass Gold Plated 20-21
M24308/5-60 M2000/5-60 Standard 50 Socket N/A Brass Gold Plated 20-21
M24308/5-12Z M2000/5-12Z Standard 9 Socket N/A Brass Zinc YP 20-21
M24308/5-13Z M2000/5-13Z Standard 15 Socket N/A Brass Zinc YP 20-21
M24308/5-14Z M2000/5-14Z Standard 25 Socket N/A Brass Zinc YP 20-21
M24308/5-15Z M2000/5-15Z Standard 37 Socket N/A Brass Zinc YP 20-21
M24308/5-16Z M2000/5-16Z Standard 50 Socket N/A Brass Zinc YP 20-21
M24308/5-23Z M2000/5-23Z Standard 9 Socket N/A Brass Zinc YP 20-21
M24308/5-24Z M2000/5-24Z Standard 15 Socket N/A Brass Zinc YP 20-21
M24308/5-25Z M2000/5-25Z Standard 25 Socket N/A Brass Zinc YP 20-21
M24308/5-26Z M2000/5-26Z Standard 37 Socket N/A Brass Zinc YP 20-21
M24308/5-27Z M2000/5-27Z Standard 50 Socket N/A Brass Zinc YP 20-21
M24308/5-45 M2000/5-45 Standard 9 Socket N/A Brass Gold Plated 20-21
M24308/5-46 M2000/5-46 Standard 15 Socket N/A Brass Gold Plated 20-21
M24308/5-47 M2000/5-47 Standard 25 Socket N/A Brass Gold Plated 20-21
M24308/5-48 M2000/5-48 Standard 37 Socket N/A Brass Gold Plated 20-21
M24308/5-49 M2000/5-49 Standard 50 Socket N/A Brass Gold Plated 20-21
M24308/5-56 M2000/5-56 Standard 9 Socket N/A Brass Gold Plated 20-21
M24308/5-57 M2000/5-57 Standard 15 Socket N/A Brass Gold Plated 20-21
M24308/5-58 M2000/5-58 Standard 25 Socket N/A Brass Gold Plated 20-21
M24308/5-59 M2000/5-59 Standard 37 Socket N/A Brass Gold Plated 20-21
M24308/5-60 M2000/5-60 Standard 50 Socket N/A Brass Gold Plated 20-21
M24308/5-1F M2000/5-1F Standard 9 Socket N/A Brass Cadmium YP 20-21
M24308/5-2F M2000/5-2F Standard 15 Socket N/A Brass Cadmium YP 20-21
M24308/5-3F M2000/5-3F Standard 25 Socket N/A Brass Cadmium YP 20-21
M24308/5-4F M2000/5-4F Standard 37 Socket N/A Brass Cadmium YP 20-21
M24308/5-5F M2000/5-5F Standard 50 Socket N/A Brass Cadmium YP 20-21
M24308/5-1Z M2000/5-1Z Standard 9 Socket N/A Brass Zinc YP 20-21
M24308/5-2Z M2000/5-2Z Standard 15 Socket N/A Brass Zinc YP 20-21
M24308/5-3Z M2000/5-3Z Standard 25 Socket N/A Brass Zinc YP 20-21
M24308/5-4Z M2000/5-4Z Standard 37 Socket N/A Brass Zinc YP 20-21
M24308/5-5Z M2000/5-5Z Standard 50 Socket N/A Brass Zinc YP 20-21
M24308/5-34 M2000/5-34 Standard 9 Socket N/A Brass Gold 20-21
M24308/5-35 M2000/5-35 Standard 15 Socket N/A Brass Gold 20-21
M24308/5-36 M2000/5-36 Standard 25 Socket N/A Brass Gold 20-21
M24308/5-37 M2000/5-37 Standard 37 Socket N/A Brass Gold 20-21
M24308/5-38 M2000/5-38 Standard 50 Socket N/A Brass Gold 20-21
M24308/6-1F M2000/6-1F Standard 9 Socket N Brass Cadmium YP 16-19
M24308/6-2F M2000/6-2F Standard 15 Socket N Brass Cadmium YP 16-19
M24308/6-3F M2000/6-3F Standard 25 Socket N Brass Cadmium YP 16-19
Visit amphenolpcd.com for more information
52
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/6-4F M2000/6-4F Standard 37 Socket N Brass Cadmium YP 16-19
M24308/6-5F M2000/6-5F Standard 50 Socket N Brass Cadmium YP 16-19
M24308/6-6F M2000/6-6F Standard 9 Socket Y Brass Cadmium YP 16-19
M24308/6-7F M2000/6-7F Standard 15 Socket Y Brass Cadmium YP 16-19
M24308/6-8F M2000/6-8F Standard 25 Socket Y Brass Cadmium YP 16-19
M24308/6-9F M2000/6-9F Standard 37 Socket Y Brass Cadmium YP 16-19
M24308/6-10F M2000/6-10F Standard 50 Socket Y Brass Cadmium YP 16-19
M24308/6-281F M2000/6-281F Standard 9 N N Brass Cadmium YP 16-19
M24308/6-282F M2000/6-282F Standard 15 N N Brass Cadmium YP 16-19
M24308/6-283F M2000/6-283F Standard 25 N N Brass Cadmium YP 16-19
M24308/6-284F M2000/6-284F Standard 37 N N Brass Cadmium YP 16-19
M24308/6-285F M2000/6-285F Standard 50 N N Brass Cadmium YP 16-19
M24308/6-11F M2000/6-11F High Density 15 Socket N Brass Cadmium YP 16-19
M24308/6-12F M2000/6-12F High Density 26 Socket N Brass Cadmium YP 16-19
M24308/6-13F M2000/6-13F High Density 44 Socket N Brass Cadmium YP 16-19
M24308/6-14F M2000/6-14F High Density 62 Socket N Brass Cadmium YP 16-19
M24308/6-15F M2000/6-15F High Density 78 Socket N Brass Cadmium YP 16-19
M24308/6-16F M2000/6-16F High Density 104 Socket N Brass Cadmium YP 16-19
M24308/6-17F M2000/6-17F High Density 15 Socket Y Brass Cadmium YP 16-19
M24308/6-18F M2000/6-18F High Density 26 Socket Y Brass Cadmium YP 16-19
M24308/6-19F M2000/6-19F High Density 44 Socket Y Brass Cadmium YP 16-19
M24308/6-20F M2000/6-20F High Density 62 Socket Y Brass Cadmium YP 16-19
M24308/6-21F M2000/6-21F High Density 78 Socket Y Brass Cadmium YP 16-19
M24308/6-22F M2000/6-22F High Density 104 Socket Y Brass Cadmium YP 16-19
M24308/6-286F M2000/6-286F High Density 15 N N Brass Cadmium YP 16-19
M24308/6-287F M2000/6-287F High Density 26 N N Brass Cadmium YP 16-19
M24308/6-288F M2000/6-288F High Density 44 N N Brass Cadmium YP 16-19
M24308/6-289F M2000/6-289F High Density 62 N N Brass Cadmium YP 16-19
M24308/6-290F M2000/6-290F High Density 78 N N Brass Cadmium YP 16-19
M24308/6-291F M2000/6-291F High Density 104 N N Brass Cadmium YP 16-19
M24308/6-1Z M2000/6-1Z Standard 9 Socket N Brass Zinc YP 16-19
M24308/6-2Z M2000/6-2Z Standard 15 Socket N Brass Zinc YP 16-19
M24308/6-3Z M2000/6-3Z Standard 25 Socket N Brass Zinc YP 16-19
M24308/6-4Z M2000/6-4Z Standard 37 Socket N Brass Zinc YP 16-19
M24308/6-5Z M2000/6-5Z Standard 50 Socket N Brass Zinc YP 16-19
M24308/6-6Z M2000/6-6Z Standard 9 Socket Y Brass Zinc YP 16-19
M24308/6-7Z M2000/6-7Z Standard 15 Socket Y Brass Zinc YP 16-19
M24308/6-8Z M2000/6-8Z Standard 25 Socket Y Brass Zinc YP 16-19
M24308/6-9Z M2000/6-9Z Standard 37 Socket Y Brass Zinc YP 16-19
M24308/6-10Z M2000/6-10Z Standard 50 Socket Y Brass Zinc YP 16-19
M24308/6-281Z M2000/6-281Z Standard 9 N N Brass Zinc YP 16-19
M24308/6-282Z M2000/6-282Z Standard 15 N N Brass Zinc YP 16-19
M24308/6-283Z M2000/6-283Z Standard 25 N N Brass Zinc YP 16-19
M24308/6-284Z M2000/6-284Z Standard 37 N N Brass Zinc YP 16-19
M24308/6-285Z M2000/6-285Z Standard 50 N N Brass Zinc YP 16-19
M24308/6-11Z M2000/6-11Z High Density 15 Socket N Brass Zinc YP 16-19
Contact dsubs@amphenolpcd.com 53
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/6-12Z M2000/6-12Z High Density 26 Socket N Brass Zinc YP 16-19
M24308/6-13Z M2000/6-13Z High Density 44 Socket N Brass Zinc YP 16-19
M24308/6-14Z M2000/6-14Z High Density 62 Socket N Brass Zinc YP 16-19
M24308/6-15Z M2000/6-15Z High Density 78 Socket N Brass Zinc YP 16-19
M24308/6-16Z M2000/6-16Z High Density 104 Socket N Brass Zinc YP 16-19
M24308/6-17Z M2000/6-17Z High Density 15 Socket Y Brass Zinc YP 16-19
M24308/6-18Z M2000/6-18Z High Density 26 Socket Y Brass Zinc YP 16-19
M24308/6-19Z M2000/6-19Z High Density 44 Socket Y Brass Zinc YP 16-19
M24308/6-20Z M2000/6-20Z High Density 62 Socket Y Brass Zinc YP 16-19
M24308/6-21Z M2000/6-21Z High Density 78 Socket Y Brass Zinc YP 16-19
M24308/6-22Z M2000/6-22Z High Density 104 Socket Y Brass Zinc YP 16-19
M24308/6-286Z M2000/6-286Z High Density 15 N N Brass Zinc YP 16-19
M24308/6-287Z M2000/6-287Z High Density 26 N N Brass Zinc YP 16-19
M24308/6-288Z M2000/6-288Z High Density 44 N N Brass Zinc YP 16-19
M24308/6-289Z M2000/6-289Z High Density 62 N N Brass Zinc YP 16-19
M24308/6-290Z M2000/6-290Z High Density 78 N N Brass Zinc YP 16-19
M24308/6-291Z M2000/6-291Z High Density 104 N N Brass Zinc YP 16-19
M24308/6-1K M2000/6-1K Standard 9 Socket N Brass Zinc Nickel 16-19
M24308/6-2K M2000/6-2K Standard 15 Socket N Brass Zinc Nickel 16-19
M24308/6-502 M2000/6-502 Standard 9 Socket N Brass Gold 16-19
M24308/6-503 M2000/6-503 Standard 15 Socket N Brass Gold 16-19
M24308/6-504 M2000/6-504 Standard 25 Socket N Brass Gold 16-19
M24308/6-505 M2000/6-505 Standard 37 Socket N Brass Gold 16-19
M24308/6-506 M2000/6-506 Standard 50 Socket N Brass Gold 16-19
M24308/6-507 M2000/6-507 Standard 9 Socket Y Brass Gold 16-19
M24308/6-508 M2000/6-508 Standard 15 Socket Y Brass Gold 16-19
M24308/6-509 M2000/6-509 Standard 25 Socket Y Brass Gold 16-19
M24308/6-510 M2000/6-510 Standard 37 Socket Y Brass Gold 16-19
M24308/6-511 M2000/6-511 Standard 50 Socket Y Brass Gold 16-19
M24308/6-540 M2000/6-540 Standard 9 N N Brass Gold 16-19
M24308/6-541 M2000/6-541 Standard 15 N N Brass Gold 16-19
M24308/6-542 M2000/6-542 Standard 25 N N Brass Gold 16-19
M24308/6-543 M2000/6-543 Standard 37 N N Brass Gold 16-19
M24308/6-544 M2000/6-544 Standard 50 N N Brass Gold 16-19
M24308/6-512 M2000/6-512 High Density 15 Socket N Brass Gold 16-19
M24308/6-513 M2000/6-513 High Density 26 Socket N Brass Gold 16-19
M24308/6-514 M2000/6-514 High Density 44 Socket N Brass Gold 16-19
M24308/6-515 M2000/6-515 High Density 62 Socket N Brass Gold 16-19
M24308/6-516 M2000/6-516 High Density 78 Socket N Brass Gold 16-19
M24308/6-517 M2000/6-517 High Density 104 Socket N Brass Gold 16-19
M24308/6-518 M2000/6-518 High Density 15 Socket Y Brass Gold 16-19
M24308/6-519 M2000/6-519 High Density 26 Socket Y Brass Gold 16-19
M24308/6-520 M2000/6-520 High Density 44 Socket Y Brass Gold 16-19
M24308/6-521 M2000/6-521 High Density 62 Socket Y Brass Gold 16-19
M24308/6-522 M2000/6-522 High Density 78 Socket Y Brass Gold 16-19
M24308/6-523 M2000/6-523 High Density 104 Socket Y Brass Gold 16-19
Visit amphenolpcd.com for more information
54
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/6-545 M2000/6-545 High Density 15 N N Brass Gold 16-19
M24308/6-546 M2000/6-546 High Density 26 N N Brass Gold 16-19
M24308/6-547 M2000/6-547 High Density 44 N N Brass Gold 16-19
M24308/6-548 M2000/6-548 High Density 62 N N Brass Gold 16-19
M24308/6-549 M2000/6-549 High Density 78 N N Brass Gold 16-19
M24308/6-550 M2000/6-550 High Density 104 N N Brass Gold 16-19
M24308/6-259F M2000/6-259F Standard 9 Socket N Brass Cadmium YP 16-19
M24308/6-260F M2000/6-260F Standard 15 Socket N Brass Cadmium YP 16-19
M24308/6-261F M2000/6-261F Standard 25 Socket N Brass Cadmium YP 16-19
M24308/6-262F M2000/6-262F Standard 37 Socket N Brass Cadmium YP 16-19
M24308/6-263F M2000/6-263F Standard 50 Socket N Brass Cadmium YP 16-19
M24308/6-270F M2000/6-270F Standard 9 Socket Y Brass Cadmium YP 16-19
M24308/6-271F M2000/6-271F Standard 15 Socket Y Brass Cadmium YP 16-19
M24308/6-272F M2000/6-272F Standard 25 Socket Y Brass Cadmium YP 16-19
M24308/6-273F M2000/6-273F Standard 37 Socket Y Brass Cadmium YP 16-19
M24308/6-274F M2000/6-274F Standard 50 Socket Y Brass Cadmium YP 16-19
M24308/6-264F M2000/6-264F High Density 15 Socket N Brass Cadmium YP 16-19
M24308/6-265F M2000/6-265F High Density 26 Socket N Brass Cadmium YP 16-19
M24308/6-266F M2000/6-266F High Density 44 Socket N Brass Cadmium YP 16-19
M24308/6-267F M2000/6-267F High Density 62 Socket N Brass Cadmium YP 16-19
M24308/6-268F M2000/6-268F High Density 78 Socket N Brass Cadmium YP 16-19
M24308/6-269F M2000/6-269F High Density 104 Socket N Brass Cadmium YP 16-19
M24308/6-275F M2000/6-275F High Density 15 Socket Y Brass Cadmium YP 16-19
M24308/6-276F M2000/6-276F High Density 26 Socket Y Brass Cadmium YP 16-19
M24308/6-277F M2000/6-277F High Density 44 Socket Y Brass Cadmium YP 16-19
M24308/6-278F M2000/6-278F High Density 62 Socket Y Brass Cadmium YP 16-19
M24308/6-279F M2000/6-279F High Density 78 Socket Y Brass Cadmium YP 16-19
M24308/6-280F M2000/6-280F High Density 104 Socket Y Brass Cadmium YP 16-19
M24308/6-453F M2000/6-453F Standard 9 Socket N Brass Cadmium YP 16-19
M24308/6-454F M2000/6-454F Standard 15 Socket N Brass Cadmium YP 16-19
M24308/6-455F M2000/6-455F Standard 25 Socket N Brass Cadmium YP 16-19
M24308/6-456F M2000/6-456F Standard 37 Socket N Brass Cadmium YP 16-19
M24308/6-457F M2000/6-457F Standard 50 Socket N Brass Cadmium YP 16-19
M24308/6-464F M2000/6-464F Standard 9 Socket Y Brass Cadmium YP 16-19
M24308/6-465F M2000/6-465F Standard 15 Socket Y Brass Cadmium YP 16-19
M24308/6-466F M2000/6-466F Standard 25 Socket Y Brass Cadmium YP 16-19
M24308/6-467F M2000/6-467F Standard 37 Socket Y Brass Cadmium YP 16-19
M24308/6-468F M2000/6-468F Standard 50 Socket Y Brass Cadmium YP 16-19
M24308/6-491F M2000/6-491F Standard 9 N N Brass Cadmium YP 16-19
M24308/6-492F M2000/6-492F Standard 15 N N Brass Cadmium YP 16-19
M24308/6-493F M2000/6-493F Standard 25 N N Brass Cadmium YP 16-19
M24308/6-494F M2000/6-494F Standard 37 N N Brass Cadmium YP 16-19
M24308/6-495F M2000/6-495F Standard 50 N N Brass Cadmium YP 16-19
M24308/6-458F M2000/6-458F High Density 15 Socket N Brass Cadmium YP 16-19
M24308/6-459F M2000/6-459F High Density 26 Socket N Brass Cadmium YP 16-19
M24308/6-460F M2000/6-460F High Density 44 Socket N Brass Cadmium YP 16-19
Contact dsubs@amphenolpcd.com 55
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/6-461F M2000/6-461F High Density 62 Socket N Brass Cadmium YP 16-19
M24308/6-462F M2000/6-462F High Density 78 Socket N Brass Cadmium YP 16-19
M24308/6-463F M2000/6-463F High Density 104 Socket N Brass Cadmium YP 16-19
M24308/6-469F M2000/6-469F High Density 15 Socket Y Brass Cadmium YP 16-19
M24308/6-470F M2000/6-470F High Density 26 Socket Y Brass Cadmium YP 16-19
M24308/6-471F M2000/6-471F High Density 44 Socket Y Brass Cadmium YP 16-19
M24308/6-472F M2000/6-472F High Density 62 Socket Y Brass Cadmium YP 16-19
M24308/6-473F M2000/6-473F High Density 78 Socket Y Brass Cadmium YP 16-19
M24308/6-474F M2000/6-474F High Density 104 Socket Y Brass Cadmium YP 16-19
M24308/6-496F M2000/6-496F High Density 15 N N Brass Cadmium YP 16-19
M24308/6-497F M2000/6-497F High Density 26 N N Brass Cadmium YP 16-19
M24308/6-498F M2000/6-498F High Density 44 N N Brass Cadmium YP 16-19
M24308/6-499F M2000/6-499F High Density 62 N N Brass Cadmium YP 16-19
M24308/6-500F M2000/6-500F High Density 78 N N Brass Cadmium YP 16-19
M24308/6-501F M2000/6-501F High Density 104 N N Brass Cadmium YP 16-19
M24308/6-259Z M2000/6-259Z Standard 9 Socket N Brass Zinc YP 16-19
M24308/6-260Z M2000/6-260Z Standard 15 Socket N Brass Zinc YP 16-19
M24308/6-261Z M2000/6-261Z Standard 25 Socket N Brass Zinc YP 16-19
M24308/6-262Z M2000/6-262Z Standard 37 Socket N Brass Zinc YP 16-19
M24308/6-263Z M2000/6-263Z Standard 50 Socket N Brass Zinc YP 16-19
M24308/6-270Z M2000/6-270Z Standard 9 Socket Y Brass Zinc YP 16-19
M24308/6-271Z M2000/6-271Z Standard 15 Socket Y Brass Zinc YP 16-19
M24308/6-272Z M2000/6-272Z Standard 25 Socket Y Brass Zinc YP 16-19
M24308/6-273Z M2000/6-273Z Standard 37 Socket Y Brass Zinc YP 16-19
M24308/6-274Z M2000/6-274Z Standard 50 Socket Y Brass Zinc YP 16-19
M24308/6-264Z M2000/6-264Z High Density 15 Socket N Brass Zinc YP 16-19
M24308/6-265Z M2000/6-265Z High Density 26 Socket N Brass Zinc YP 16-19
M24308/6-266Z M2000/6-266Z High Density 44 Socket N Brass Zinc YP 16-19
M24308/6-267Z M2000/6-267Z High Density 62 Socket N Brass Zinc YP 16-19
M24308/6-268Z M2000/6-268Z High Density 78 Socket N Brass Zinc YP 16-19
M24308/6-269Z M2000/6-269Z High Density 104 Socket N Brass Zinc YP 16-19
M24308/6-275Z M2000/6-275Z High Density 15 Socket Y Brass Zinc YP 16-19
M24308/6-276Z M2000/6-276Z High Density 26 Socket Y Brass Zinc YP 16-19
M24308/6-277Z M2000/6-277Z High Density 44 Socket Y Brass Zinc YP 16-19
M24308/6-278Z M2000/6-278Z High Density 62 Socket Y Brass Zinc YP 16-19
M24308/6-279Z M2000/6-279Z High Density 78 Socket Y Brass Zinc YP 16-19
M24308/6-280Z M2000/6-280Z High Density 104 Socket Y Brass Zinc YP 16-19
M24308/6-453Z M2000/6-453Z Standard 9 Socket N Brass Zinc YP 16-19
M24308/6-454Z M2000/6-454Z Standard 15 Socket N Brass Zinc YP 16-19
M24308/6-455Z M2000/6-455Z Standard 25 Socket N Brass Zinc YP 16-19
M24308/6-456Z M2000/6-456Z Standard 37 Socket N Brass Zinc YP 16-19
M24308/6-457Z M2000/6-457Z Standard 50 Socket N Brass Zinc YP 16-19
M24308/6-464Z M2000/6-464Z Standard 9 Socket Y Brass Zinc YP 16-19
M24308/6-465Z M2000/6-465Z Standard 15 Socket Y Brass Zinc YP 16-19
M24308/6-466Z M2000/6-466Z Standard 25 Socket Y Brass Zinc YP 16-19
M24308/6-467Z M2000/6-467Z Standard 37 Socket Y Brass Zinc YP 16-19
Visit amphenolpcd.com for more information
56
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/6-468Z M2000/6-468Z Standard 50 Socket Y Brass Zinc YP 16-19
M24308/6-491Z M2000/6-491Z Standard 9 N N Brass Zinc YP 16-19
M24308/6-492Z M2000/6-492Z Standard 15 N N Brass Zinc YP 16-19
M24308/6-493Z M2000/6-493Z Standard 25 N N Brass Zinc YP 16-19
M24308/6-494Z M2000/6-494Z Standard 37 N N Brass Zinc YP 16-19
M24308/6-495Z M2000/6-495Z Standard 50 N N Brass Zinc YP 16-19
M24308/6-458Z M2000/6-458Z High Density 15 Socket N Brass Zinc YP 16-19
M24308/6-459Z M2000/6-459Z High Density 26 Socket N Brass Zinc YP 16-19
M24308/6-460Z M2000/6-460Z High Density 44 Socket N Brass Zinc YP 16-19
M24308/6-461Z M2000/6-461Z High Density 62 Socket N Brass Zinc YP 16-19
M24308/6-462Z M2000/6-462Z High Density 78 Socket N Brass Zinc YP 16-19
M24308/6-463Z M2000/6-463Z High Density 104 Socket N Brass Zinc YP 16-19
M24308/6-469Z M2000/6-469Z High Density 15 Socket Y Brass Zinc YP 16-19
M24308/6-470Z M2000/6-470Z High Density 26 Socket Y Brass Zinc YP 16-19
M24308/6-471Z M2000/6-471Z High Density 44 Socket Y Brass Zinc YP 16-19
M24308/6-472Z M2000/6-472Z High Density 62 Socket Y Brass Zinc YP 16-19
M24308/6-473Z M2000/6-473Z High Density 78 Socket Y Brass Zinc YP 16-19
M24308/6-474Z M2000/6-474Z High Density 104 Socket Y Brass Zinc YP 16-19
M24308/6-496Z M2000/6-496Z High Density 15 N N Brass Zinc YP 16-19
M24308/6-497Z M2000/6-497Z High Density 26 N N Brass Zinc YP 16-19
M24308/6-498Z M2000/6-498Z High Density 44 N N Brass Zinc YP 16-19
M24308/6-499Z M2000/6-499Z High Density 62 N N Brass Zinc YP 16-19
M24308/6-500Z M2000/6-500Z High Density 78 N N Brass Zinc YP 16-19
M24308/6-501Z M2000/6-501Z High Density 104 N N Brass Zinc YP 16-19
M24308/7-34 M2000/7-34 Standard 9 Pin N/A Brass Gold Plated 20-21
M24308/7-35 M2000/7-35 Standard 15 Pin N/A Brass Gold Plated 20-21
M24308/7-36 M2000/7-36 Standard 25 Pin N/A Brass Gold Plated 20-21
M24308/7-37 M2000/7-37 Standard 37 Pin N/A Brass Gold Plated 20-21
M24308/7-38 M2000/7-38 Standard 50 Pin N/A Brass Gold Plated 20-21
M24308/7-39 M2000/7-39 Standard 9 Pin N/A Brass Gold Plated 20-21
M24308/7-40 M2000/7-40 Standard 15 Pin N/A Brass Gold Plated 20-21
M24308/7-41 M2000/7-41 Standard 25 Pin N/A Brass Gold Plated 20-21
M24308/7-42 M2000/7-42 Standard 37 Pin N/A Brass Gold Plated 20-21
M24308/7-43 M2000/7-43 Standard 50 Pin N/A Brass Gold Plated 20-21
M24308/7-12Z M2000/7-12Z Standard 9 Pin N/A Brass Zinc YP 20-21
M24308/7-13Z M2000/7-13Z Standard 15 Pin N/A Brass Zinc YP 20-21
M24308/7-14Z M2000/7-14Z Standard 25 Pin N/A Brass Zinc YP 20-21
M24308/7-15Z M2000/7-15Z Standard 37 Pin N/A Brass Zinc YP 20-21
M24308/7-16Z M2000/7-16Z Standard 50 Pin N/A Brass Zinc YP 20-21
M24308/7-17Z M2000/7-17Z Standard 9 Pin N/A Brass Zinc YP 20-21
M24308/7-18Z M2000/7-18Z Standard 15 Pin N/A Brass Zinc YP 20-21
M24308/7-19Z M2000/7-19Z Standard 25 Pin N/A Brass Zinc YP 20-21
M24308/7-20Z M2000/7-20Z Standard 37 Pin N/A Brass Zinc YP 20-21
M24308/7-21Z M2000/7-21Z Standard 50 Pin N/A Brass Zinc YP 20-21
M24308/7-34 M2000/7-34 Standard 9 Pin N/A Brass Gold Plated 20-21
M24308/7-35 M2000/7-35 Standard 15 Pin N/A Brass Gold Plated 20-21
Contact dsubs@amphenolpcd.com 57
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/7-36 M2000/7-36 Standard 25 Pin N/A Brass Gold Plated 20-21
M24308/7-37 M2000/7-37 Standard 37 Pin N/A Brass Gold Plated 20-21
M24308/7-38 M2000/7-38 Standard 50 Pin N/A Brass Gold Plated 20-21
M24308/7-39 M2000/7-39 Standard 9 Pin N/A Brass Gold Plated 20-21
M24308/7-40 M2000/7-40 Standard 15 Pin N/A Brass Gold Plated 20-21
M24308/7-41 M2000/7-41 Standard 25 Pin N/A Brass Gold Plated 20-21
M24308/7-42 M2000/7-42 Standard 37 Pin N/A Brass Gold Plated 20-21
M24308/7-43 M2000/7-43 Standard 50 Pin N/A Brass Gold Plated 20-21
M24308/7-1F M2000/7-1F Standard 9 Pin N/A Brass Cadmium YP 20-21
M24308/7-2F M2000/7-2F Standard 15 Pin N/A Brass Cadmium YP 20-21
M24308/7-3F M2000/7-3F Standard 25 Pin N/A Brass Cadmium YP 20-21
M24308/7-4F M2000/7-4F Standard 37 Pin N/A Brass Cadmium YP 20-21
M24308/7-5F M2000/7-5F Standard 50 Pin N/A Brass Cadmium YP 20-21
M24308/7-1Z M2000/7-1Z Standard 9 Pin N/A Brass Zinc YP 20-21
M24308/7-2Z M2000/7-2Z Standard 15 Pin N/A Brass Zinc YP 20-21
M24308/7-3Z M2000/7-3Z Standard 25 Pin N/A Brass Zinc YP 20-21
M24308/7-4Z M2000/7-4Z Standard 37 Pin N/A Brass Zinc YP 20-21
M24308/7-5Z M2000/7-5Z Standard 50 Pin N/A Brass Zinc YP 20-21
M24308/7-23 M2000/7-23 Standard 9 Pin N/A Brass Gold 20-21
M24308/7-24 M2000/7-24 Standard 15 Pin N/A Brass Gold 20-21
M24308/7-25 M2000/7-25 Standard 25 Pin N/A Brass Gold 20-21
M24308/7-26 M2000/7-26 Standard 37 Pin N/A Brass Gold 20-21
M24308/7-27 M2000/7-27 Standard 50 Pin N/A Brass Gold 20-21
M24308/8-1F M2000/8-1F Standard 9 Pin N Brass Cadmium YP 16-19
M24308/8-2F M2000/8-2F Standard 15 Pin N Brass Cadmium YP 16-19
M24308/8-3F M2000/8-3F Standard 25 Pin N Brass Cadmium YP 16-19
M24308/8-4F M2000/8-4F Standard 37 Pin N Brass Cadmium YP 16-19
M24308/8-5F M2000/8-5F Standard 50 Pin N Brass Cadmium YP 16-19
M24308/8-6F M2000/8-6F Standard 9 Pin Y Brass Cadmium YP 16-19
M24308/8-7F M2000/8-7F Standard 15 Pin Y Brass Cadmium YP 16-19
M24308/8-8F M2000/8-8F Standard 25 Pin Y Brass Cadmium YP 16-19
M24308/8-9F M2000/8-9F Standard 37 Pin Y Brass Cadmium YP 16-19
M24308/8-10F M2000/8-10F Standard 50 Pin Y Brass Cadmium YP 16-19
M24308/8-259F M2000/8-259F Standard 9 N N Brass Cadmium YP 16-19
M24308/8-260F M2000/8-260F Standard 15 N N Brass Cadmium YP 16-19
M24308/8-261F M2000/8-261F Standard 25 N N Brass Cadmium YP 16-19
M24308/8-262F M2000/8-262F Standard 37 N N Brass Cadmium YP 16-19
M24308/8-263F M2000/8-263F Standard 50 N N Brass Cadmium YP 16-19
M24308/8-11F M2000/8-11F High Density 15 Pin N Brass Cadmium YP 16-19
M24308/8-12F M2000/8-12F High Density 26 Pin N Brass Cadmium YP 16-19
M24308/8-13F M2000/8-13F High Density 44 Pin N Brass Cadmium YP 16-19
M24308/8-14F M2000/8-14F High Density 62 Pin N Brass Cadmium YP 16-19
M24308/8-15F M2000/8-15F High Density 78 Pin N Brass Cadmium YP 16-19
M24308/8-16F M2000/8-16F High Density 104 Pin N Brass Cadmium YP 16-19
M24308/8-17F M2000/8-17F High Density 15 Pin Y Brass Cadmium YP 16-19
M24308/8-18F M2000/8-18F High Density 26 Pin Y Brass Cadmium YP 16-19
Visit amphenolpcd.com for more information
58
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/8-19F M2000/8-19F High Density 44 Pin Y Brass Cadmium YP 16-19
M24308/8-20F M2000/8-20F High Density 62 Pin Y Brass Cadmium YP 16-19
M24308/8-21F M2000/8-21F High Density 78 Pin Y Brass Cadmium YP 16-19
M24308/8-22F M2000/8-22F High Density 104 Pin Y Brass Cadmium YP 16-19
M24308/8-264F M2000/8-264F High Density 15 N N Brass Cadmium YP 16-19
M24308/8-265F M2000/8-265F High Density 26 N N Brass Cadmium YP 16-19
M24308/8-266F M2000/8-266F High Density 44 N N Brass Cadmium YP 16-19
M24308/8-267F M2000/8-267F High Density 62 N N Brass Cadmium YP 16-19
M24308/8-268F M2000/8-268F High Density 78 N N Brass Cadmium YP 16-19
M24308/8-269F M2000/8-269F High Density 104 N N Brass Cadmium YP 16-19
M24308/8-1Z M2000/8-1Z Standard 9 Pin N Brass Zinc YP 16-19
M24308/8-2Z M2000/8-2Z Standard 15 Pin N Brass Zinc YP 16-19
M24308/8-3Z M2000/8-3Z Standard 25 Pin N Brass Zinc YP 16-19
M24308/8-4Z M2000/8-4Z Standard 37 Pin N Brass Zinc YP 16-19
M24308/8-5Z M2000/8-5Z Standard 50 Pin N Brass Zinc YP 16-19
M24308/8-6Z M2000/8-6Z Standard 9 Pin Y Brass Zinc YP 16-19
M24308/8-7Z M2000/8-7Z Standard 15 Pin Y Brass Zinc YP 16-19
M24308/8-8Z M2000/8-8Z Standard 25 Pin Y Brass Zinc YP 16-19
M24308/8-9Z M2000/8-9Z Standard 37 Pin Y Brass Zinc YP 16-19
M24308/8-10Z M2000/8-10Z Standard 50 Pin Y Brass Zinc YP 16-19
M24308/8-259Z M2000/8-259Z Standard 9 N N Brass Zinc YP 16-19
M24308/8-260Z M2000/8-260Z Standard 15 N N Brass Zinc YP 16-19
M24308/8-261Z M2000/8-261Z Standard 25 N N Brass Zinc YP 16-19
M24308/8-262Z M2000/8-262Z Standard 37 N N Brass Zinc YP 16-19
M24308/8-263Z M2000/8-263Z Standard 50 N N Brass Zinc YP 16-19
M24308/8-11Z M2000/8-11Z High Density 15 Pin N Brass Zinc YP 16-19
M24308/8-12Z M2000/8-12Z High Density 26 Pin N Brass Zinc YP 16-19
M24308/8-13Z M2000/8-13Z High Density 44 Pin N Brass Zinc YP 16-19
M24308/8-14Z M2000/8-14Z High Density 62 Pin N Brass Zinc YP 16-19
M24308/8-15Z M2000/8-15Z High Density 78 Pin N Brass Zinc YP 16-19
M24308/8-16Z M2000/8-16Z High Density 104 Pin N Brass Zinc YP 16-19
M24308/8-17Z M2000/8-17Z High Density 15 Pin Y Brass Zinc YP 16-19
M24308/8-18Z M2000/8-18Z High Density 26 Pin Y Brass Zinc YP 16-19
M24308/8-19Z M2000/8-19Z High Density 44 Pin Y Brass Zinc YP 16-19
M24308/8-20Z M2000/8-20Z High Density 62 Pin Y Brass Zinc YP 16-19
M24308/8-21Z M2000/8-21Z High Density 78 Pin Y Brass Zinc YP 16-19
M24308/8-22Z M2000/8-22Z High Density 104 Pin Y Brass Zinc YP 16-19
M24308/8-264Z M2000/8-264Z High Density 15 N N Brass Zinc YP 16-19
M24308/8-265Z M2000/8-265Z High Density 26 N N Brass Zinc YP 16-19
M24308/8-266Z M2000/8-266Z High Density 44 N N Brass Zinc YP 16-19
M24308/8-267Z M2000/8-267Z High Density 62 N N Brass Zinc YP 16-19
M24308/8-268Z M2000/8-268Z High Density 78 N N Brass Zinc YP 16-19
M24308/8-269Z M2000/8-269Z High Density 104 N N Brass Zinc YP 16-19
M24308/8-335 M2000/8-335 Standard 9 Pin N Brass Gold 16-19
M24308/8-336 M2000/8-336 Standard 15 Pin N Brass Gold 16-19
M24308/8-337 M2000/8-337 Standard 25 Pin N Brass Gold 16-19
Contact dsubs@amphenolpcd.com 59
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/8-338 M2000/8-338 Standard 37 Pin N Brass Gold 16-19
M24308/8-339 M2000/8-339 Standard 50 Pin N Brass Gold 16-19
M24308/8-340 M2000/8-340 Standard 9 Pin Y Brass Gold 16-19
M24308/8-341 M2000/8-341 Standard 15 Pin Y Brass Gold 16-19
M24308/8-342 M2000/8-342 Standard 25 Pin Y Brass Gold 16-19
M24308/8-343 M2000/8-343 Standard 37 Pin Y Brass Gold 16-19
M24308/8-344 M2000/8-344 Standard 50 Pin Y Brass Gold 16-19
M24308/8-357 M2000/8-357 Standard 9 N N Brass Gold 16-19
M24308/8-358 M2000/8-358 Standard 15 N N Brass Gold 16-19
M24308/8-359 M2000/8-359 Standard 25 N N Brass Gold 16-19
M24308/8-360 M2000/8-360 Standard 37 N N Brass Gold 16-19
M24308/8-361 M2000/8-361 Standard 50 N N Brass Gold 16-19
M24308/8-345 M2000/8-345 High Density 15 Pin N Brass Gold 16-19
M24308/8-346 M2000/8-346 High Density 26 Pin N Brass Gold 16-19
M24308/8-347 M2000/8-347 High Density 44 Pin N Brass Gold 16-19
M24308/8-348 M2000/8-348 High Density 62 Pin N Brass Gold 16-19
M24308/8-349 M2000/8-349 High Density 78 Pin N Brass Gold 16-19
M24308/8-350 M2000/8-350 High Density 104 Pin N Brass Gold 16-19
M24308/8-351 M2000/8-351 High Density 15 Pin Y Brass Gold 16-19
M24308/8-352 M2000/8-352 High Density 26 Pin Y Brass Gold 16-19
M24308/8-353 M2000/8-353 High Density 44 Pin Y Brass Gold 16-19
M24308/8-354 M2000/8-354 High Density 62 Pin Y Brass Gold 16-19
M24308/8-355 M2000/8-355 High Density 78 Pin Y Brass Gold 16-19
M24308/8-356 M2000/8-356 High Density 104 Pin Y Brass Gold 16-19
M24308/8-362 M2000/8-362 High Density 15 N N Brass Gold 16-19
M24308/8-363 M2000/8-363 High Density 26 N N Brass Gold 16-19
M24308/8-364 M2000/8-364 High Density 44 N N Brass Gold 16-19
M24308/8-365 M2000/8-365 High Density 62 N N Brass Gold 16-19
M24308/8-366 M2000/8-366 High Density 78 N N Brass Gold 16-19
M24308/8-367 M2000/8-367 High Density 104 N N Brass Gold 16-19
M24308/8-302F M2000/8-302F Standard 9 Pin N Brass Cadmium YP 16-19
M24308/8-303F M2000/8-303F Standard 15 Pin N Brass Cadmium YP 16-19
M24308/8-304F M2000/8-304F Standard 25 Pin N Brass Cadmium YP 16-19
M24308/8-305F M2000/8-305F Standard 37 Pin N Brass Cadmium YP 16-19
M24308/8-306F M2000/8-306F Standard 50 Pin N Brass Cadmium YP 16-19
M24308/8-313F M2000/8-313F Standard 9 Pin Y Brass Cadmium YP 16-19
M24308/8-314F M2000/8-314F Standard 15 Pin Y Brass Cadmium YP 16-19
M24308/8-315F M2000/8-315F Standard 25 Pin Y Brass Cadmium YP 16-19
M24308/8-316F M2000/8-316F Standard 37 Pin Y Brass Cadmium YP 16-19
M24308/8-317F M2000/8-317F Standard 50 Pin Y Brass Cadmium YP 16-19
M24308/8-324F M2000/8-324F Standard 9 N N Brass Cadmium YP 16-19
M24308/8-325F M2000/8-325F Standard 15 N N Brass Cadmium YP 16-19
M24308/8-326F M2000/8-326F Standard 25 N N Brass Cadmium YP 16-19
M24308/8-327F M2000/8-327F Standard 37 N N Brass Cadmium YP 16-19
M24308/8-328F M2000/8-328F Standard 50 N N Brass Cadmium YP 16-19
M24308/8-307F M2000/8-307F High Density 15 Pin N Brass Cadmium YP 16-19
Visit amphenolpcd.com for more information
60
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/8-308F M2000/8-308F High Density 26 Pin N Brass Cadmium YP 16-19
M24308/8-309F M2000/8-309F High Density 44 Pin N Brass Cadmium YP 16-19
M24308/8-310F M2000/8-310F High Density 62 Pin N Brass Cadmium YP 16-19
M24308/8-311F M2000/8-311F High Density 78 Pin N Brass Cadmium YP 16-19
M24308/8-312F M2000/8-312F High Density 104 Pin N Brass Cadmium YP 16-19
M24308/8-318F M2000/8-318F High Density 15 Pin Y Brass Cadmium YP 16-19
M24308/8-319F M2000/8-319F High Density 26 Pin Y Brass Cadmium YP 16-19
M24308/8-320F M2000/8-320F High Density 44 Pin Y Brass Cadmium YP 16-19
M24308/8-321F M2000/8-321F High Density 62 Pin Y Brass Cadmium YP 16-19
M24308/8-322F M2000/8-322F High Density 78 Pin Y Brass Cadmium YP 16-19
M24308/8-323F M2000/8-323F High Density 104 Pin Y Brass Cadmium YP 16-19
M24308/8-329F M2000/8-329F High Density 15 N N Brass Cadmium YP 16-19
M24308/8-330F M2000/8-330F High Density 26 N N Brass Cadmium YP 16-19
M24308/8-331F M2000/8-331F High Density 44 N N Brass Cadmium YP 16-19
M24308/8-332F M2000/8-332F High Density 62 N N Brass Cadmium YP 16-19
M24308/8-333F M2000/8-333F High Density 78 N N Brass Cadmium YP 16-19
M24308/8-334F M2000/8-334F High Density 104 N N Brass Cadmium YP 16-19
M24308/8-435F M2000/8-435F Standard 9 Pin N Brass Cadmium YP 16-19
M24308/8-436F M2000/8-436F Standard 15 Pin N Brass Cadmium YP 16-19
M24308/8-437F M2000/8-437F Standard 25 Pin N Brass Cadmium YP 16-19
M24308/8-438F M2000/8-438F Standard 37 Pin N Brass Cadmium YP 16-19
M24308/8-439F M2000/8-439F Standard 50 Pin N Brass Cadmium YP 16-19
M24308/8-446F M2000/8-446F Standard 9 Pin Y Brass Cadmium YP 16-19
M24308/8-447F M2000/8-447F Standard 15 Pin Y Brass Cadmium YP 16-19
M24308/8-448F M2000/8-448F Standard 25 Pin Y Brass Cadmium YP 16-19
M24308/8-449F M2000/8-449F Standard 37 Pin Y Brass Cadmium YP 16-19
M24308/8-450F M2000/8-450F Standard 50 Pin Y Brass Cadmium YP 16-19
M24308/8-457F M2000/8-457F Standard 9 N N Brass Cadmium YP 16-19
M24308/8-458F M2000/8-458F Standard 15 N N Brass Cadmium YP 16-19
M24308/8-459F M2000/8-459F Standard 25 N N Brass Cadmium YP 16-19
M24308/8-460F M2000/8-460F Standard 37 N N Brass Cadmium YP 16-19
M24308/8-461F M2000/8-461F Standard 50 N N Brass Cadmium YP 16-19
M24308/8-440F M2000/8-440F High Density 15 Pin N Brass Cadmium YP 16-19
M24308/8-441F M2000/8-441F High Density 26 Pin N Brass Cadmium YP 16-19
M24308/8-442F M2000/8-442F High Density 44 Pin N Brass Cadmium YP 16-19
M24308/8-443F M2000/8-443F High Density 62 Pin N Brass Cadmium YP 16-19
M24308/8-444F M2000/8-444F High Density 78 Pin N Brass Cadmium YP 16-19
M24308/8-445F M2000/8-445F High Density 104 Pin N Brass Cadmium YP 16-19
M24308/8-451F M2000/8-451F High Density 15 Pin Y Brass Cadmium YP 16-19
M24308/8-452F M2000/8-452F High Density 26 Pin Y Brass Cadmium YP 16-19
M24308/8-453F M2000/8-453F High Density 44 Pin Y Brass Cadmium YP 16-19
M24308/8-454F M2000/8-454F High Density 62 Pin Y Brass Cadmium YP 16-19
M24308/8-455F M2000/8-455F High Density 78 Pin Y Brass Cadmium YP 16-19
M24308/8-456F M2000/8-456F High Density 104 Pin Y Brass Cadmium YP 16-19
M24308/8-462F M2000/8-462F High Density 15 N N Brass Cadmium YP 16-19
M24308/8-463F M2000/8-463F High Density 26 N N Brass Cadmium YP 16-19
Contact dsubs@amphenolpcd.com 61
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/8-464F M2000/8-464F High Density 44 N N Brass Cadmium YP 16-19
M24308/8-465F M2000/8-465F High Density 62 N N Brass Cadmium YP 16-19
M24308/8-466F M2000/8-466F High Density 78 N N Brass Cadmium YP 16-19
M24308/8-467F M2000/8-467F High Density 104 N N Brass Cadmium YP 16-19
M24308/8-302Z M2000/8-302Z Standard 9 Pin N Brass Zinc YP 16-19
M24308/8-303Z M2000/8-303Z Standard 15 Pin N Brass Zinc YP 16-19
M24308/8-304Z M2000/8-304Z Standard 25 Pin N Brass Zinc YP 16-19
M24308/8-305Z M2000/8-305Z Standard 37 Pin N Brass Zinc YP 16-19
M24308/8-306Z M2000/8-306Z Standard 50 Pin N Brass Zinc YP 16-19
M24308/8-313Z M2000/8-313Z Standard 9 Pin Y Brass Zinc YP 16-19
M24308/8-314Z M2000/8-314Z Standard 15 Pin Y Brass Zinc YP 16-19
M24308/8-315Z M2000/8-315Z Standard 25 Pin Y Brass Zinc YP 16-19
M24308/8-316Z M2000/8-316Z Standard 37 Pin Y Brass Zinc YP 16-19
M24308/8-317Z M2000/8-317Z Standard 50 Pin Y Brass Zinc YP 16-19
M24308/8-324Z M2000/8-324Z Standard 9 N N Brass Zinc YP 16-19
M24308/8-325Z M2000/8-325Z Standard 15 N N Brass Zinc YP 16-19
M24308/8-326Z M2000/8-326Z Standard 25 N N Brass Zinc YP 16-19
M24308/8-327Z M2000/8-327Z Standard 37 N N Brass Zinc YP 16-19
M24308/8-328Z M2000/8-328Z Standard 50 N N Brass Zinc YP 16-19
M24308/8-307Z M2000/8-307Z High Density 15 Pin N Brass Zinc YP 16-19
M24308/8-308Z M2000/8-308Z High Density 26 Pin N Brass Zinc YP 16-19
M24308/8-309Z M2000/8-309Z High Density 44 Pin N Brass Zinc YP 16-19
M24308/8-310Z M2000/8-310Z High Density 62 Pin N Brass Zinc YP 16-19
M24308/8-311Z M2000/8-311Z High Density 78 Pin N Brass Zinc YP 16-19
M24308/8-312Z M2000/8-312Z High Density 104 Pin N Brass Zinc YP 16-19
M24308/8-318Z M2000/8-318Z High Density 15 Pin Y Brass Zinc YP 16-19
M24308/8-319Z M2000/8-319Z High Density 26 Pin Y Brass Zinc YP 16-19
M24308/8-320Z M2000/8-320Z High Density 44 Pin Y Brass Zinc YP 16-19
M24308/8-321Z M2000/8-321Z High Density 62 Pin Y Brass Zinc YP 16-19
M24308/8-322Z M2000/8-322Z High Density 78 Pin Y Brass Zinc YP 16-19
M24308/8-323Z M2000/8-323Z High Density 104 Pin Y Brass Zinc YP 16-19
M24308/8-329Z M2000/8-329Z High Density 15 N N Brass Zinc YP 16-19
M24308/8-330Z M2000/8-330Z High Density 26 N N Brass Zinc YP 16-19
M24308/8-331Z M2000/8-331Z High Density 44 N N Brass Zinc YP 16-19
M24308/8-332Z M2000/8-332Z High Density 62 N N Brass Zinc YP 16-19
M24308/8-333Z M2000/8-333Z High Density 78 N N Brass Zinc YP 16-19
M24308/8-334Z M2000/8-334Z High Density 104 N N Brass Zinc YP 16-19
M24308/8-435Z M2000/8-435Z Standard 9 Pin N Brass Zinc YP 16-19
M24308/8-436Z M2000/8-436Z Standard 15 Pin N Brass Zinc YP 16-19
M24308/8-437Z M2000/8-437Z Standard 25 Pin N Brass Zinc YP 16-19
M24308/8-438Z M2000/8-438Z Standard 37 Pin N Brass Zinc YP 16-19
M24308/8-439Z M2000/8-439Z Standard 50 Pin N Brass Zinc YP 16-19
M24308/8-446Z M2000/8-446Z Standard 9 Pin Y Brass Zinc YP 16-19
M24308/8-447Z M2000/8-447Z Standard 15 Pin Y Brass Zinc YP 16-19
M24308/8-448Z M2000/8-448Z Standard 25 Pin Y Brass Zinc YP 16-19
M24308/8-449Z M2000/8-449Z Standard 37 Pin Y Brass Zinc YP 16-19
Visit amphenolpcd.com for more information
62
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/8-450Z M2000/8-450Z Standard 50 Pin Y Brass Zinc YP 16-19
M24308/8-457Z M2000/8-457Z Standard 9 N N Brass Zinc YP 16-19
M24308/8-458Z M2000/8-458Z Standard 15 N N Brass Zinc YP 16-19
M24308/8-459Z M2000/8-459Z Standard 25 N N Brass Zinc YP 16-19
M24308/8-460Z M2000/8-460Z Standard 37 N N Brass Zinc YP 16-19
M24308/8-461Z M2000/8-461Z Standard 50 N N Brass Zinc YP 16-19
M24308/8-440Z M2000/8-440Z High Density 15 Pin N Brass Zinc YP 16-19
M24308/8-441Z M2000/8-441Z High Density 26 Pin N Brass Zinc YP 16-19
M24308/8-442Z M2000/8-442Z High Density 44 Pin N Brass Zinc YP 16-19
M24308/8-443Z M2000/8-443Z High Density 62 Pin N Brass Zinc YP 16-19
M24308/8-444Z M2000/8-444Z High Density 78 Pin N Brass Zinc YP 16-19
M24308/8-445Z M2000/8-445Z High Density 104 Pin N Brass Zinc YP 16-19
M24308/8-451Z M2000/8-451Z High Density 15 Pin Y Brass Zinc YP 16-19
M24308/8-452Z M2000/8-452Z High Density 26 Pin Y Brass Zinc YP 16-19
M24308/8-453Z M2000/8-453Z High Density 44 Pin Y Brass Zinc YP 16-19
M24308/8-454Z M2000/8-454Z High Density 62 Pin Y Brass Zinc YP 16-19
M24308/8-455Z M2000/8-455Z High Density 78 Pin Y Brass Zinc YP 16-19
M24308/8-456Z M2000/8-456Z High Density 104 Pin Y Brass Zinc YP 16-19
M24308/8-462Z M2000/8-462Z High Density 15 N N Brass Zinc YP 16-19
M24308/8-463Z M2000/8-463Z High Density 26 N N Brass Zinc YP 16-19
M24308/8-464Z M2000/8-464Z High Density 44 N N Brass Zinc YP 16-19
M24308/8-465Z M2000/8-465Z High Density 62 N N Brass Zinc YP 16-19
M24308/8-466Z M2000/8-466Z High Density 78 N N Brass Zinc YP 16-19
M24308/8-467Z M2000/8-467Z High Density 104 N N Brass Zinc YP 16-19
M24308/8-368 M2000/8-368 Standard 9 Pin N Brass Gold 16-19
M24308/8-369 M2000/8-369 Standard 15 Pin N Brass Gold 16-19
M24308/8-370 M2000/8-370 Standard 25 Pin N Brass Gold 16-19
M24308/8-371 M2000/8-371 Standard 37 Pin N Brass Gold 16-19
M24308/8-372 M2000/8-372 Standard 50 Pin N Brass Gold 16-19
M24308/8-379 M2000/8-379 Standard 9 Pin Y Brass Gold 16-19
M24308/8-380 M2000/8-380 Standard 15 Pin Y Brass Gold 16-19
M24308/8-381 M2000/8-381 Standard 25 Pin Y Brass Gold 16-19
M24308/8-382 M2000/8-382 Standard 37 Pin Y Brass Gold 16-19
M24308/8-383 M2000/8-383 Standard 50 Pin Y Brass Gold 16-19
M24308/8-390 M2000/8-390 Standard 9 N N Brass Gold 16-19
M24308/8-391 M2000/8-391 Standard 15 N N Brass Gold 16-19
M24308/8-392 M2000/8-392 Standard 25 N N Brass Gold 16-19
M24308/8-393 M2000/8-393 Standard 37 N N Brass Gold 16-19
M24308/8-394 M2000/8-394 Standard 50 N N Brass Gold 16-19
M24308/8-373 M2000/8-373 High Density 15 Pin N Brass Gold 16-19
M24308/8-374 M2000/8-374 High Density 26 Pin N Brass Gold 16-19
M24308/8-375 M2000/8-375 High Density 44 Pin N Brass Gold 16-19
M24308/8-376 M2000/8-376 High Density 62 Pin N Brass Gold 16-19
M24308/8-377 M2000/8-377 High Density 78 Pin N Brass Gold 16-19
M24308/8-378 M2000/8-378 High Density 104 Pin N Brass Gold 16-19
M24308/8-384 M2000/8-384 High Density 15 Pin Y Brass Gold 16-19
Contact dsubs@amphenolpcd.com 63
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/8-385 M2000/8-385 High Density 26 Pin Y Brass Gold 16-19
M24308/8-386 M2000/8-386 High Density 44 Pin Y Brass Gold 16-19
M24308/8-387 M2000/8-387 High Density 62 Pin Y Brass Gold 16-19
M24308/8-388 M2000/8-388 High Density 78 Pin Y Brass Gold 16-19
M24308/8-389 M2000/8-389 High Density 104 Pin Y Brass Gold 16-19
M24308/8-395 M2000/8-395 High Density 15 N N Brass Gold 16-19
M24308/8-396 M2000/8-396 High Density 26 N N Brass Gold 16-19
M24308/8-397 M2000/8-397 High Density 44 N N Brass Gold 16-19
M24308/8-398 M2000/8-398 High Density 62 N N Brass Gold 16-19
M24308/8-399 M2000/8-399 High Density 78 N N Brass Gold 16-19
M24308/8-400 M2000/8-400 High Density 104 N N Brass Gold 16-19
M24308/8-401 M2000/8-401 Standard 9 Pin N Brass Gold 16-19
M24308/8-402 M2000/8-402 Standard 15 Pin N Brass Gold 16-19
M24308/8-403 M2000/8-403 Standard 25 Pin N Brass Gold 16-19
M24308/8-404 M2000/8-404 Standard 37 Pin N Brass Gold 16-19
M24308/8-405 M2000/8-405 Standard 50 Pin N Brass Gold 16-19
M24308/8-412 M2000/8-412 Standard 9 Pin Y Brass Gold 16-19
M24308/8-413 M2000/8-413 Standard 15 Pin Y Brass Gold 16-19
M24308/8-414 M2000/8-414 Standard 25 Pin Y Brass Gold 16-19
M24308/8-415 M2000/8-415 Standard 37 Pin Y Brass Gold 16-19
M24308/8-416 M2000/8-416 Standard 50 Pin Y Brass Gold 16-19
M24308/8-423 M2000/8-423 Standard 9 N N Brass Gold 16-19
M24308/8-424 M2000/8-424 Standard 15 N N Brass Gold 16-19
M24308/8-425 M2000/8-425 Standard 25 N N Brass Gold 16-19
M24308/8-426 M2000/8-426 Standard 37 N N Brass Gold 16-19
M24308/8-427 M2000/8-427 Standard 50 N N Brass Gold 16-19
M24308/8-406 M2000/8-406 High Density 15 Pin N Brass Gold 16-19
M24308/8-407 M2000/8-407 High Density 26 Pin N Brass Gold 16-19
M24308/8-408 M2000/8-408 High Density 44 Pin N Brass Gold 16-19
M24308/8-409 M2000/8-409 High Density 62 Pin N Brass Gold 16-19
M24308/8-410 M2000/8-410 High Density 78 Pin N Brass Gold 16-19
M24308/8-411 M2000/8-411 High Density 104 Pin N Brass Gold 16-19
M24308/8-417 M2000/8-417 High Density 15 Pin Y Brass Gold 16-19
M24308/8-418 M2000/8-418 High Density 26 Pin Y Brass Gold 16-19
M24308/8-419 M2000/8-419 High Density 44 Pin Y Brass Gold 16-19
M24308/8-420 M2000/8-420 High Density 62 Pin Y Brass Gold 16-19
M24308/8-421 M2000/8-421 High Density 78 Pin Y Brass Gold 16-19
M24308/8-422 M2000/8-422 High Density 104 Pin Y Brass Gold 16-19
M24308/8-428 M2000/8-428 High Density 15 N N Brass Gold 16-19
M24308/8-429 M2000/8-429 High Density 26 N N Brass Gold 16-19
M24308/8-430 M2000/8-430 High Density 44 N N Brass Gold 16-19
M24308/8-431 M2000/8-431 High Density 62 N N Brass Gold 16-19
M24308/8-432 M2000/8-432 High Density 78 N N Brass Gold 16-19
M24308/8-433 M2000/8-433 High Density 104 N N Brass Gold 16-19
M24308/23-25F M2000/23-25F Standard 9 Socket N/A Steel Cadmium YP 22-30
M24308/23-26F M2000/23-26F Standard 15 Socket N/A Steel Cadmium YP 22-30
Visit amphenolpcd.com for more information
64
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/23-27F M2000/23-27F Standard 25 Socket N/A Steel Cadmium YP 22-30
M24308/23-28F M2000/23-28F Standard 37 Socket N/A Steel Cadmium YP 22-30
M24308/23-29F M2000/23-29F Standard 50 Socket N/A Steel Cadmium YP 22-30
M24308/23-31F M2000/23-31F Standard 9 Socket N/A Steel Cadmium YP 22-30
M24308/23-32F M2000/23-32F Standard 15 Socket N/A Steel Cadmium YP 22-30
M24308/23-33F M2000/23-33F Standard 25 Socket N/A Steel Cadmium YP 22-30
M24308/23-34F M2000/23-34F Standard 37 Socket N/A Steel Cadmium YP 22-30
M24308/23-35F M2000/23-35F Standard 50 Socket N/A Steel Cadmium YP 22-30
M24308/23-37F M2000/23-37F Standard 9 Socket N/A Steel Cadmium YP 22-30
M24308/23-38F M2000/23-38F Standard 15 Socket N/A Steel Cadmium YP 22-30
M24308/23-39F M2000/23-39F Standard 25 Socket N/A Steel Cadmium YP 22-30
M24308/23-40F M2000/23-40F Standard 37 Socket N/A Steel Cadmium YP 22-30
M24308/23-41F M2000/23-41F Standard 50 Socket N/A Steel Cadmium YP 22-30
M24308/23-43F M2000/23-43F Standard 9 Socket N/A Steel Cadmium YP 22-30
M24308/23-44F M2000/23-44F Standard 15 Socket N/A Steel Cadmium YP 22-30
M24308/23-45F M2000/23-45F Standard 25 Socket N/A Steel Cadmium YP 22-30
M24308/23-46F M2000/23-46F Standard 37 Socket N/A Steel Cadmium YP 22-30
M24308/23-47F M2000/23-47F Standard 50 Socket N/A Steel Cadmium YP 22-30
M24308/23-49F M2000/23-49F Standard 9 Socket N/A Steel Cadmium YP 22-30
M24308/23-50F M2000/23-50F Standard 15 Socket N/A Steel Cadmium YP 22-30
M24308/23-51F M2000/23-51F Standard 25 Socket N/A Steel Cadmium YP 22-30
M24308/23-52F M2000/23-52F Standard 37 Socket N/A Steel Cadmium YP 22-30
M24308/23-53F M2000/23-53F Standard 50 Socket N/A Steel Cadmium YP 22-30
M24308/23-55F M2000/23-55F Standard 9 Socket N/A Steel Cadmium YP 22-30
M24308/23-56F M2000/23-56F Standard 15 Socket N/A Steel Cadmium YP 22-30
M24308/23-57F M2000/23-57F Standard 25 Socket N/A Steel Cadmium YP 22-30
M24308/23-58F M2000/23-58F Standard 37 Socket N/A Steel Cadmium YP 22-30
M24308/23-59F M2000/23-59F Standard 50 Socket N/A Steel Cadmium YP 22-30
M24308/23-73F M2000/23-73F High Density 15 Socket N/A Steel Cadmium YP 22-30
M24308/23-74F M2000/23-74F High Density 26 Socket N/A Steel Cadmium YP 22-30
M24308/23-75F M2000/23-75F High Density 44 Socket N/A Steel Cadmium YP 22-30
M24308/23-76F M2000/23-76F High Density 62 Socket N/A Steel Cadmium YP 22-30
M24308/23-77F M2000/23-77F High Density 78 Socket N/A Steel Cadmium YP 22-30
M24308/23-225F M2000/23-225F Standard 9 Socket N/A Brass Cadmium YP 22-30
M24308/23-226F M2000/23-226F Standard 15 Socket N/A Brass Cadmium YP 22-30
M24308/23-227F M2000/23-227F Standard 25 Socket N/A Brass Cadmium YP 22-30
M24308/23-228F M2000/23-228F Standard 37 Socket N/A Brass Cadmium YP 22-30
M24308/23-229F M2000/23-229F Standard 50 Socket N/A Brass Cadmium YP 22-30
M24308/23-231F M2000/23-231F Standard 9 Socket N/A Brass Cadmium YP 22-30
M24308/23-232F M2000/23-232F Standard 15 Socket N/A Brass Cadmium YP 22-30
M24308/23-233F M2000/23-233F Standard 25 Socket N/A Brass Cadmium YP 22-30
M24308/23-234F M2000/23-234F Standard 37 Socket N/A Brass Cadmium YP 22-30
M24308/23-235F M2000/23-235F Standard 50 Socket N/A Brass Cadmium YP 22-30
M24308/23-237F M2000/23-237F Standard 9 Socket N/A Brass Cadmium YP 22-30
M24308/23-238F M2000/23-238F Standard 15 Socket N/A Brass Cadmium YP 22-30
M24308/23-239F M2000/23-239F Standard 25 Socket N/A Brass Cadmium YP 22-30
Contact dsubs@amphenolpcd.com 65
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/23-240F M2000/23-240F Standard 37 Socket N/A Brass Cadmium YP 22-30
M24308/23-241F M2000/23-241F Standard 50 Socket N/A Brass Cadmium YP 22-30
M24308/23-243F M2000/23-243F Standard 9 Socket N/A Brass Cadmium YP 22-30
M24308/23-244F M2000/23-244F Standard 15 Socket N/A Brass Cadmium YP 22-30
M24308/23-245F M2000/23-245F Standard 25 Socket N/A Brass Cadmium YP 22-30
M24308/23-246F M2000/23-246F Standard 37 Socket N/A Brass Cadmium YP 22-30
M24308/23-247F M2000/23-247F Standard 50 Socket N/A Brass Cadmium YP 22-30
M24308/23-249F M2000/23-249F Standard 9 Socket N/A Brass Cadmium YP 22-30
M24308/23-250F M2000/23-250F Standard 15 Socket N/A Brass Cadmium YP 22-30
M24308/23-251F M2000/23-251F Standard 25 Socket N/A Brass Cadmium YP 22-30
M24308/23-252F M2000/23-252F Standard 37 Socket N/A Brass Cadmium YP 22-30
M24308/23-253F M2000/23-253F Standard 50 Socket N/A Brass Cadmium YP 22-30
M24308/23-255F M2000/23-255F Standard 9 Socket N/A Brass Cadmium YP 22-30
M24308/23-256F M2000/23-256F Standard 15 Socket N/A Brass Cadmium YP 22-30
M24308/23-257F M2000/23-257F Standard 25 Socket N/A Brass Cadmium YP 22-30
M24308/23-258F M2000/23-258F Standard 37 Socket N/A Brass Cadmium YP 22-30
M24308/23-259F M2000/23-259F Standard 50 Socket N/A Brass Cadmium YP 22-30
M24308/23-273F M2000/23-273F High Density 15 Socket N/A Brass Cadmium YP 22-30
M24308/23-274F M2000/23-274F High Density 26 Socket N/A Brass Cadmium YP 22-30
M24308/23-275F M2000/23-275F High Density 44 Socket N/A Brass Cadmium YP 22-30
M24308/23-276F M2000/23-276F High Density 62 Socket N/A Brass Cadmium YP 22-30
M24308/23-277F M2000/23-277F High Density 78 Socket N/A Brass Cadmium YP 22-30
M24308/23-25Z M2000/23-25Z Standard 9 Socket N/A Steel Zinc YP 22-30
M24308/23-26Z M2000/23-26Z Standard 15 Socket N/A Steel Zinc YP 22-30
M24308/23-27Z M2000/23-27Z Standard 25 Socket N/A Steel Zinc YP 22-30
M24308/23-28Z M2000/23-28Z Standard 37 Socket N/A Steel Zinc YP 22-30
M24308/23-29Z M2000/23-29Z Standard 50 Socket N/A Steel Zinc YP 22-30
M24308/23-31Z M2000/23-31Z Standard 9 Socket N/A Steel Zinc YP 22-30
M24308/23-32Z M2000/23-32Z Standard 15 Socket N/A Steel Zinc YP 22-30
M24308/23-33Z M2000/23-33Z Standard 25 Socket N/A Steel Zinc YP 22-30
M24308/23-34Z M2000/23-34Z Standard 37 Socket N/A Steel Zinc YP 22-30
M24308/23-35Z M2000/23-35Z Standard 50 Socket N/A Steel Zinc YP 22-30
M24308/23-37Z M2000/23-37Z Standard 9 Socket N/A Steel Zinc YP 22-30
M24308/23-38Z M2000/23-38Z Standard 15 Socket N/A Steel Zinc YP 22-30
M24308/23-39Z M2000/23-39Z Standard 25 Socket N/A Steel Zinc YP 22-30
M24308/23-40Z M2000/23-40Z Standard 37 Socket N/A Steel Zinc YP 22-30
M24308/23-41Z M2000/23-41Z Standard 50 Socket N/A Steel Zinc YP 22-30
M24308/23-43Z M2000/23-43Z Standard 9 Socket N/A Steel Zinc YP 22-30
M24308/23-44Z M2000/23-44Z Standard 15 Socket N/A Steel Zinc YP 22-30
M24308/23-45Z M2000/23-45Z Standard 25 Socket N/A Steel Zinc YP 22-30
M24308/23-46Z M2000/23-46Z Standard 37 Socket N/A Steel Zinc YP 22-30
M24308/23-47Z M2000/23-47Z Standard 50 Socket N/A Steel Zinc YP 22-30
M24308/23-49Z M2000/23-49Z Standard 9 Socket N/A Steel Zinc YP 22-30
M24308/23-50Z M2000/23-50Z Standard 15 Socket N/A Steel Zinc YP 22-30
M24308/23-51Z M2000/23-51Z Standard 25 Socket N/A Steel Zinc YP 22-30
M24308/23-52Z M2000/23-52Z Standard 37 Socket N/A Steel Zinc YP 22-30
Visit amphenolpcd.com for more information
66
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/23-53Z M2000/23-53Z Standard 50 Socket N/A Steel Zinc YP 22-30
M24308/23-55Z M2000/23-55Z Standard 9 Socket N/A Steel Zinc YP 22-30
M24308/23-56Z M2000/23-56Z Standard 15 Socket N/A Steel Zinc YP 22-30
M24308/23-57Z M2000/23-57Z Standard 25 Socket N/A Steel Zinc YP 22-30
M24308/23-58Z M2000/23-58Z Standard 37 Socket N/A Steel Zinc YP 22-30
M24308/23-59Z M2000/23-59Z Standard 50 Socket N/A Steel Zinc YP 22-30
M24308/23-73Z M2000/23-73Z High Density 15 Socket N/A Steel Zinc YP 22-30
M24308/23-74Z M2000/23-74Z High Density 26 Socket N/A Steel Zinc YP 22-30
M24308/23-75Z M2000/23-75Z High Density 44 Socket N/A Steel Zinc YP 22-30
M24308/23-76Z M2000/23-76Z High Density 62 Socket N/A Steel Zinc YP 22-30
M24308/23-77Z M2000/23-77Z High Density 78 Socket N/A Steel Zinc YP 22-30
M24308/23-225Z M2000/23-225Z Standard 9 Socket N/A Brass Zinc YP 22-30
M24308/23-226Z M2000/23-226Z Standard 15 Socket N/A Brass Zinc YP 22-30
M24308/23-227Z M2000/23-227Z Standard 25 Socket N/A Brass Zinc YP 22-30
M24308/23-228Z M2000/23-228Z Standard 37 Socket N/A Brass Zinc YP 22-30
M24308/23-229Z M2000/23-229Z Standard 50 Socket N/A Brass Zinc YP 22-30
M24308/23-231Z M2000/23-231Z Standard 9 Socket N/A Brass Zinc YP 22-30
M24308/23-232Z M2000/23-232Z Standard 15 Socket N/A Brass Zinc YP 22-30
M24308/23-233Z M2000/23-233Z Standard 25 Socket N/A Brass Zinc YP 22-30
M24308/23-234Z M2000/23-234Z Standard 37 Socket N/A Brass Zinc YP 22-30
M24308/23-235Z M2000/23-235Z Standard 50 Socket N/A Brass Zinc YP 22-30
M24308/23-237Z M2000/23-237Z Standard 9 Socket N/A Brass Zinc YP 22-30
M24308/23-238Z M2000/23-238Z Standard 15 Socket N/A Brass Zinc YP 22-30
M24308/23-239Z M2000/23-239Z Standard 25 Socket N/A Brass Zinc YP 22-30
M24308/23-240Z M2000/23-240Z Standard 37 Socket N/A Brass Zinc YP 22-30
M24308/23-241Z M2000/23-241Z Standard 50 Socket N/A Brass Zinc YP 22-30
M24308/23-243Z M2000/23-243Z Standard 9 Socket N/A Brass Zinc YP 22-30
M24308/23-244Z M2000/23-244Z Standard 15 Socket N/A Brass Zinc YP 22-30
M24308/23-245Z M2000/23-245Z Standard 25 Socket N/A Brass Zinc YP 22-30
M24308/23-246Z M2000/23-246Z Standard 37 Socket N/A Brass Zinc YP 22-30
M24308/23-247Z M2000/23-247Z Standard 50 Socket N/A Brass Zinc YP 22-30
M24308/23-249Z M2000/23-249Z Standard 9 Socket N/A Brass Zinc YP 22-30
M24308/23-250Z M2000/23-250Z Standard 15 Socket N/A Brass Zinc YP 22-30
M24308/23-251Z M2000/23-251Z Standard 25 Socket N/A Brass Zinc YP 22-30
M24308/23-252Z M2000/23-252Z Standard 37 Socket N/A Brass Zinc YP 22-30
M24308/23-253Z M2000/23-253Z Standard 50 Socket N/A Brass Zinc YP 22-30
M24308/23-255Z M2000/23-255Z Standard 9 Socket N/A Brass Zinc YP 22-30
M24308/23-256Z M2000/23-256Z Standard 15 Socket N/A Brass Zinc YP 22-30
M24308/23-257Z M2000/23-257Z Standard 25 Socket N/A Brass Zinc YP 22-30
M24308/23-258Z M2000/23-258Z Standard 37 Socket N/A Brass Zinc YP 22-30
M24308/23-259Z M2000/23-259Z Standard 50 Socket N/A Brass Zinc YP 22-30
M24308/23-273Z M2000/23-273Z High Density 15 Socket N/A Brass Zinc YP 22-30
M24308/23-274Z M2000/23-274Z High Density 26 Socket N/A Brass Zinc YP 22-30
M24308/23-275Z M2000/23-275Z High Density 44 Socket N/A Brass Zinc YP 22-30
M24308/23-276Z M2000/23-276Z High Density 62 Socket N/A Brass Zinc YP 22-30
M24308/23-277Z M2000/23-277Z High Density 78 Socket N/A Brass Zinc YP 22-30
Contact dsubs@amphenolpcd.com 67
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/23-25K M2000/23-25K Standard 9 Socket N/A Steel Zinc Nickel 22-30
M24308/23-26K M2000/23-26K Standard 15 Socket N/A Steel Zinc Nickel 22-30
M24308/23-27K M2000/23-27K Standard 25 Socket N/A Steel Zinc Nickel 22-30
M24308/23-28K M2000/23-28K Standard 37 Socket N/A Steel Zinc Nickel 22-30
M24308/23-29K M2000/23-29K Standard 50 Socket N/A Steel Zinc Nickel 22-30
M24308/23-31K M2000/23-31K Standard 9 Socket N/A Steel Zinc Nickel 22-30
M24308/23-32K M2000/23-32K Standard 15 Socket N/A Steel Zinc Nickel 22-30
M24308/23-33K M2000/23-33K Standard 25 Socket N/A Steel Zinc Nickel 22-30
M24308/23-34K M2000/23-34K Standard 37 Socket N/A Steel Zinc Nickel 22-30
M24308/23-35K M2000/23-35K Standard 50 Socket N/A Steel Zinc Nickel 22-30
M24308/23-37K M2000/23-37K Standard 9 Socket N/A Steel Zinc Nickel 22-30
M24308/23-38K M2000/23-38K Standard 15 Socket N/A Steel Zinc Nickel 22-30
M24308/23-39K M2000/23-39K Standard 25 Socket N/A Steel Zinc Nickel 22-30
M24308/23-40K M2000/23-40K Standard 37 Socket N/A Steel Zinc Nickel 22-30
M24308/23-41K M2000/23-41K Standard 50 Socket N/A Steel Zinc Nickel 22-30
M24308/23-43K M2000/23-43K Standard 9 Socket N/A Steel Zinc Nickel 22-30
M24308/23-44K M2000/23-44K Standard 15 Socket N/A Steel Zinc Nickel 22-30
M24308/23-45K M2000/23-45K Standard 25 Socket N/A Steel Zinc Nickel 22-30
M24308/23-46K M2000/23-46K Standard 37 Socket N/A Steel Zinc Nickel 22-30
M24308/23-47K M2000/23-47K Standard 50 Socket N/A Steel Zinc Nickel 22-30
M24308/23-49K M2000/23-49K Standard 9 Socket N/A Steel Zinc Nickel 22-30
M24308/23-50K M2000/23-50K Standard 15 Socket N/A Steel Zinc Nickel 22-30
M24308/23-51K M2000/23-51K Standard 25 Socket N/A Steel Zinc Nickel 22-30
M24308/23-52K M2000/23-52K Standard 37 Socket N/A Steel Zinc Nickel 22-30
M24308/23-53K M2000/23-53K Standard 50 Socket N/A Steel Zinc Nickel 22-30
M24308/23-55K M2000/23-55K Standard 9 Socket N/A Steel Zinc Nickel 22-30
M24308/23-56K M2000/23-56K Standard 15 Socket N/A Steel Zinc Nickel 22-30
M24308/23-57K M2000/23-57K Standard 25 Socket N/A Steel Zinc Nickel 22-30
M24308/23-58K M2000/23-58K Standard 37 Socket N/A Steel Zinc Nickel 22-30
M24308/23-59K M2000/23-59K Standard 50 Socket N/A Steel Zinc Nickel 22-30
M24308/23-73K M2000/23-73K High Density 15 Socket N/A Steel Zinc Nickel 22-30
M24308/23-74K M2000/23-74K High Density 26 Socket N/A Steel Zinc Nickel 22-30
M24308/23-75K M2000/23-75K High Density 44 Socket N/A Steel Zinc Nickel 22-30
M24308/23-76K M2000/23-76K High Density 62 Socket N/A Steel Zinc Nickel 22-30
M24308/23-77K M2000/23-77K High Density 78 Socket N/A Steel Zinc Nickel 22-30
M24308/23-325 M2000/23-325 Standard 9 Socket N/A Steel Nickel Plating 22-30
M24308/23-326 M2000/23-326 Standard 15 Socket N/A Steel Nickel Plating 22-30
M24308/23-327 M2000/23-327 Standard 25 Socket N/A Steel Nickel Plating 22-30
M24308/23-328 M2000/23-328 Standard 37 Socket N/A Steel Nickel Plating 22-30
M24308/23-329 M2000/23-329 Standard 50 Socket N/A Steel Nickel Plating 22-30
M24308/23-331 M2000/23-331 Standard 9 Socket N/A Steel Nickel Plating 22-30
M24308/23-332 M2000/23-332 Standard 15 Socket N/A Steel Nickel Plating 22-30
M24308/23-333 M2000/23-333 Standard 25 Socket N/A Steel Nickel Plating 22-30
M24308/23-334 M2000/23-334 Standard 37 Socket N/A Steel Nickel Plating 22-30
M24308/23-335 M2000/23-335 Standard 50 Socket N/A Steel Nickel Plating 22-30
M24308/23-337 M2000/23-337 Standard 9 Socket N/A Steel Nickel Plating 22-30
Visit amphenolpcd.com for more information
68
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/23-338 M2000/23-338 Standard 15 Socket N/A Steel Nickel Plating 22-30
M24308/23-339 M2000/23-339 Standard 25 Socket N/A Steel Nickel Plating 22-30
M24308/23-340 M2000/23-340 Standard 37 Socket N/A Steel Nickel Plating 22-30
M24308/23-341 M2000/23-341 Standard 50 Socket N/A Steel Nickel Plating 22-30
M24308/23-343 M2000/23-343 Standard 9 Socket N/A Steel Nickel Plating 22-30
M24308/23-344 M2000/23-344 Standard 15 Socket N/A Steel Nickel Plating 22-30
M24308/23-345 M2000/23-345 Standard 25 Socket N/A Steel Nickel Plating 22-30
M24308/23-346 M2000/23-346 Standard 37 Socket N/A Steel Nickel Plating 22-30
M24308/23-347 M2000/23-347 Standard 50 Socket N/A Steel Nickel Plating 22-30
M24308/23-349 M2000/23-349 Standard 9 Socket N/A Steel Nickel Plating 22-30
M24308/23-350 M2000/23-350 Standard 15 Socket N/A Steel Nickel Plating 22-30
M24308/23-351 M2000/23-351 Standard 25 Socket N/A Steel Nickel Plating 22-30
M24308/23-352 M2000/23-352 Standard 37 Socket N/A Steel Nickel Platinxs 22-30
M24308/23-353 M2000/23-353 Standard 50 Socket N/A Steel Nickel Plating 22-30
M24308/23-355 M2000/23-355 Standard 9 Socket N/A Steel Nickel Plating 22-30
M24308/23-356 M2000/23-356 Standard 15 Socket N/A Steel Nickel Plating 22-30
M24308/23-357 M2000/23-357 Standard 25 Socket N/A Steel Nickel Plating 22-30
M24308/23-358 M2000/23-358 Standard 37 Socket N/A Steel Nickel Plating 22-30
M24308/23-359 M2000/23-359 Standard 50 Socket N/A Steel Nickel Plating 22-30
M24308/23-373 M2000/23-373 High Density 15 Socket N/A Steel Nickel Plating 22-30
M24308/23-374 M2000/23-374 High Density 26 Socket N/A Steel Nickel Plating 22-30
M24308/23-375 M2000/23-375 High Density 44 Socket N/A Steel Nickel Plating 22-30
M24308/23-376 M2000/23-376 High Density 62 Socket N/A Steel Nickel Plating 22-30
M24308/23-377 M2000/23-377 High Density 78 Socket N/A Steel Nickel Plating 22-30
M24308/23-125 M2000/23-125 Standard 9 Socket N/A Brass Gold Plating 22-30
M24308/23-126 M2000/23-126 Standard 15 Socket N/A Brass Gold Plating 22-30
M24308/23-127 M2000/23-127 Standard 25 Socket N/A Brass Gold Plating 22-30
M24308/23-128 M2000/23-128 Standard 37 Socket N/A Brass Gold Plating 22-30
M24308/23-129 M2000/23-129 Standard 50 Socket N/A Brass Gold Plating 22-30
M24308/23-131 M2000/23-131 Standard 9 Socket N/A Brass Gold Plating 22-30
M24308/23-132 M2000/23-132 Standard 15 Socket N/A Brass Gold Plating 22-30
M24308/23-133 M2000/23-133 Standard 25 Socket N/A Brass Gold Plating 22-30
M24308/23-134 M2000/23-134 Standard 37 Socket N/A Brass Gold Plating 22-30
M24308/23-135 M2000/23-135 Standard 50 Socket N/A Brass Gold Plating 22-30
M24308/23-137 M2000/23-137 Standard 9 Socket N/A Brass Gold Plating 22-30
M24308/23-138 M2000/23-138 Standard 15 Socket N/A Brass Gold Plating 22-30
M24308/23-139 M2000/23-139 Standard 25 Socket N/A Brass Gold Plating 22-30
M24308/23-140 M2000/23-140 Standard 37 Socket N/A Brass Gold Plating 22-30
M24308/23-141 M2000/23-141 Standard 50 Socket N/A Brass Gold Plating 22-30
M24308/23-143 M2000/23-143 Standard 9 Socket N/A Brass Gold Plating 22-30
M24308/23-144 M2000/23-144 Standard 15 Socket N/A Brass Gold Plating 22-30
M24308/23-145 M2000/23-145 Standard 25 Socket N/A Brass Gold Plating 22-30
M24308/23-146 M2000/23-146 Standard 37 Socket N/A Brass Gold Plating 22-30
M24308/23-147 M2000/23-147 Standard 50 Socket N/A Brass Gold Plating 22-30
M24308/23-149 M2000/23-149 Standard 9 Socket N/A Brass Gold Plating 22-30
M24308/23-150 M2000/23-150 Standard 15 Socket N/A Brass Gold Plating 22-30
Contact dsubs@amphenolpcd.com 69
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/23-151 M2000/23-151 Standard 25 Socket N/A Brass Gold Plating 22-30
M24308/23-152 M2000/23-152 Standard 37 Socket N/A Brass Gold Plating 22-30
M24308/23-153 M2000/23-153 Standard 50 Socket N/A Brass Gold Plating 22-30
M24308/23-155 M2000/23-155 Standard 9 Socket N/A Brass Gold Plating 22-30
M24308/23-156 M2000/23-156 Standard 15 Socket N/A Brass Gold Plating 22-30
M24308/23-157 M2000/23-157 Standard 25 Socket N/A Brass Gold Plating 22-30
M24308/23-158 M2000/23-158 Standard 37 Socket N/A Brass Gold Plating 22-30
M24308/23-159 M2000/23-159 Standard 50 Socket N/A Brass Gold Plating 22-30
M24308/23-173 M2000/23-173 High Density 15 Socket N/A Brass Gold Plating 22-30
M24308/23-174 M2000/23-174 High Density 26 Socket N/A Brass Gold Plating 22-30
M24308/23-175 M2000/23-175 High Density 44 Socket N/A Brass Gold Plating 22-30
M24308/23-176 M2000/23-176 High Density 62 Socket N/A Brass Gold Plating 22-30
M24308/23-177 M2000/23-177 High Density 78 Socket N/A Brass Gold Plating 22-30
M24308/23-1F M2000/23-1F Standard 9 Socket N/A Steel Cadmium YP 22-30
M24308/23-2F M2000/23-2F Standard 15 Socket N/A Steel Cadmium YP 22-30
M24308/23-3F M2000/23-3F Standard 25 Socket N/A Steel Cadmium YP 22-30
M24308/23-4F M2000/23-4F Standard 37 Socket N/A Steel Cadmium YP 22-30
M24308/23-5F M2000/23-5F Standard 50 Socket N/A Steel Cadmium YP 22-30
M24308/23-7F M2000/23-7F Standard 9 Socket N/A Steel Cadmium YP 22-30
M24308/23-8F M2000/23-8F Standard 15 Socket N/A Steel Cadmium YP 22-30
M24308/23-9F M2000/23-9F Standard 25 Socket N/A Steel Cadmium YP 22-30
M24308/23-10F M2000/23-10F Standard 37 Socket N/A Steel Cadmium YP 22-30
M24308/23-11F M2000/23-11F Standard 50 Socket N/A Steel Cadmium YP 22-30
M24308/23-13F M2000/23-13F Standard 9 Socket N/A Steel Cadmium YP 22-30
M24308/23-14F M2000/23-14F Standard 15 Socket N/A Steel Cadmium YP 22-30
M24308/23-15F M2000/23-15F Standard 25 Socket N/A Steel Cadmium YP 22-30
M24308/23-16F M2000/23-16F Standard 37 Socket N/A Steel Cadmium YP 22-30
M24308/23-17F M2000/23-17F Standard 50 Socket N/A Steel Cadmium YP 22-30
M24308/23-19F M2000/23-19F Standard 9 Socket N/A Steel Cadmium YP 22-30
M24308/23-20F M2000/23-20F Standard 15 Socket N/A Steel Cadmium YP 22-30
M24308/23-21F M2000/23-21F Standard 25 Socket N/A Steel Cadmium YP 22-30
M24308/23-22F M2000/23-22F Standard 37 Socket N/A Steel Cadmium YP 22-30
M24308/23-23F M2000/23-23F Standard 50 Socket N/A Steel Cadmium YP 22-30
M24308/23-61F M2000/23-61F High Density 15 Socket N/A Steel Cadmium YP 22-30
M24308/23-62F M2000/23-62F High Density 26 Socket N/A Steel Cadmium YP 22-30
M24308/23-63F M2000/23-63F High Density 44 Socket N/A Steel Cadmium YP 22-30
M24308/23-64F M2000/23-64F High Density 62 Socket N/A Steel Cadmium YP 22-30
M24308/23-65F M2000/23-65F High Density 78 Socket N/A Steel Cadmium YP 22-30
M24308/23-67F M2000/23-67F High Density 15 Socket N/A Steel Cadmium YP 22-30
M24308/23-68F M2000/23-68F High Density 26 Socket N/A Steel Cadmium YP 22-30
M24308/23-69F M2000/23-69F High Density 44 Socket N/A Steel Cadmium YP 22-30
M24308/23-70F M2000/23-70F High Density 62 Socket N/A Steel Cadmium YP 22-30
M24308/23-71F M2000/23-71F High Density 78 Socket N/A Steel Cadmium YP 22-30
M24308/23-201F M2000/23-201F Standard 9 Socket N/A Brass Cadmium YP 22-30
M24308/23-202F M2000/23-202F Standard 15 Socket N/A Brass Cadmium YP 22-30
M24308/23-203F M2000/23-203F Standard 25 Socket N/A Brass Cadmium YP 22-30
Visit amphenolpcd.com for more information
70
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/23-204F M2000/23-204F Standard 37 Socket N/A Brass Cadmium YP 22-30
M24308/23-205F M2000/23-205F Standard 50 Socket N/A Brass Cadmium YP 22-30
M24308/23-207F M2000/23-207F Standard 9 Socket N/A Brass Cadmium YP 22-30
M24308/23-208F M2000/23-208F Standard 15 Socket N/A Brass Cadmium YP 22-30
M24308/23-209F M2000/23-209F Standard 25 Socket N/A Brass Cadmium YP 22-30
M24308/23-210F M2000/23-210F Standard 37 Socket N/A Brass Cadmium YP 22-30
M24308/23-211F M2000/23-211F Standard 50 Socket N/A Brass Cadmium YP 22-30
M24308/23-213F M2000/23-213F Standard 9 Socket N/A Brass Cadmium YP 22-30
M24308/23-214F M2000/23-214F Standard 15 Socket N/A Brass Cadmium YP 22-30
M24308/23-215F M2000/23-215F Standard 25 Socket N/A Brass Cadmium YP 22-30
M24308/23-216F M2000/23-216F Standard 37 Socket N/A Brass Cadmium YP 22-30
M24308/23-217F M2000/23-217F Standard 50 Socket N/A Brass Cadmium YP 22-30
M24308/23-219F M2000/23-219F Standard 9 Socket N/A Brass Cadmium YP 22-30
M24308/23-220F M2000/23-220F Standard 15 Socket N/A Brass Cadmium YP 22-30
M24308/23-221F M2000/23-221F Standard 25 Socket N/A Brass Cadmium YP 22-30
M24308/23-222F M2000/23-222F Standard 37 Socket N/A Brass Cadmium YP 22-30
M24308/23-223F M2000/23-223F Standard 50 Socket N/A Brass Cadmium YP 22-30
M24308/23-261F M2000/23-261F High Density 15 Socket N/A Brass Cadmium YP 22-30
M24308/23-262F M2000/23-262F High Density 26 Socket N/A Brass Cadmium YP 22-30
M24308/23-263F M2000/23-263F High Density 44 Socket N/A Brass Cadmium YP 22-30
M24308/23-264F M2000/23-264F High Density 62 Socket N/A Brass Cadmium YP 22-30
M24308/23-265F M2000/23-265F High Density 78 Socket N/A Brass Cadmium YP 22-30
M24308/23-267F M2000/23-267F High Density 15 Socket N/A Brass Cadmium YP 22-30
M24308/23-268F M2000/23-268F High Density 26 Socket N/A Brass Cadmium YP 22-30
M24308/23-269F M2000/23-269F High Density 44 Socket N/A Brass Cadmium YP 22-30
M24308/23-270F M2000/23-270F High Density 62 Socket N/A Brass Cadmium YP 22-30
M24308/23-271F M2000/23-271F High Density 78 Socket N/A Brass Cadmium YP 22-30
M24308/23-1Z M2000/23-1Z Standard 9 Socket N/A Steel Zinc YP 22-30
M24308/23-2Z M2000/23-2Z Standard 15 Socket N/A Steel Zinc YP 22-30
M24308/23-3Z M2000/23-3Z Standard 25 Socket N/A Steel Zinc YP 22-30
M24308/23-4Z M2000/23-4Z Standard 37 Socket N/A Steel Zinc YP 22-30
M24308/23-5Z M2000/23-5Z Standard 50 Socket N/A Steel Zinc YP 22-30
M24308/23-7Z M2000/23-7Z Standard 9 Socket N/A Steel Zinc YP 22-30
M24308/23-8Z M2000/23-8Z Standard 15 Socket N/A Steel Zinc YP 22-30
M24308/23-9Z M2000/23-9Z Standard 25 Socket N/A Steel Zinc YP 22-30
M24308/23-10Z M2000/23-10Z Standard 37 Socket N/A Steel Zinc YP 22-30
M24308/23-11Z M2000/23-11Z Standard 50 Socket N/A Steel Zinc YP 22-30
M24308/23-13Z M2000/23-13Z Standard 9 Socket N/A Steel Zinc YP 22-30
M24308/23-14Z M2000/23-14Z Standard 15 Socket N/A Steel Zinc YP 22-30
M24308/23-15Z M2000/23-15Z Standard 25 Socket N/A Steel Zinc YP 22-30
M24308/23-16Z M2000/23-16Z Standard 37 Socket N/A Steel Zinc YP 22-30
M24308/23-17Z M2000/23-17Z Standard 50 Socket N/A Steel Zinc YP 22-30
M24308/23-19Z M2000/23-19Z Standard 9 Socket N/A Steel Zinc YP 22-30
M24308/23-20Z M2000/23-20Z Standard 15 Socket N/A Steel Zinc YP 22-30
M24308/23-21Z M2000/23-21Z Standard 25 Socket N/A Steel Zinc YP 22-30
M24308/23-22Z M2000/23-22Z Standard 37 Socket N/A Steel Zinc YP 22-30
Contact dsubs@amphenolpcd.com 71
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/23-23Z M2000/23-23Z Standard 50 Socket N/A Steel Zinc YP 22-30
M24308/23-61Z M2000/23-61Z High Density 15 Socket N/A Steel Zinc YP 22-30
M24308/23-62Z M2000/23-62Z High Density 26 Socket N/A Steel Zinc YP 22-30
M24308/23-63Z M2000/23-63Z High Density 44 Socket N/A Steel Zinc YP 22-30
M24308/23-64Z M2000/23-64Z High Density 62 Socket N/A Steel Zinc YP 22-30
M24308/23-65Z M2000/23-65Z High Density 78 Socket N/A Steel Zinc YP 22-30
M24308/23-67Z M2000/23-67Z High Density 15 Socket N/A Steel Zinc YP 22-30
M24308/23-68Z M2000/23-68Z High Density 26 Socket N/A Steel Zinc YP 22-30
M24308/23-69Z M2000/23-69Z High Density 44 Socket N/A Steel Zinc YP 22-30
M24308/23-70Z M2000/23-70Z High Density 62 Socket N/A Steel Zinc YP 22-30
M24308/23-71Z M2000/23-71Z High Density 78 Socket N/A Steel Zinc YP 22-30
M24308/23-201Z M2000/23-201Z Standard 9 Socket N/A Brass Zinc YP 22-30
M24308/23-202Z M2000/23-202Z Standard 15 Socket N/A Brass Zinc YP 22-30
M24308/23-203Z M2000/23-203Z Standard 25 Socket N/A Brass Zinc YP 22-30
M24308/23-204Z M2000/23-204Z Standard 37 Socket N/A Brass Zinc YP 22-30
M24308/23-205Z M2000/23-205Z Standard 50 Socket N/A Brass Zinc YP 22-30
M24308/23-207Z M2000/23-207Z Standard 9 Socket N/A Brass Zinc YP 22-30
M24308/23-208Z M2000/23-208Z Standard 15 Socket N/A Brass Zinc YP 22-30
M24308/23-209Z M2000/23-209Z Standard 25 Socket N/A Brass Zinc YP 22-30
M24308/23-210Z M2000/23-210Z Standard 37 Socket N/A Brass Zinc YP 22-30
M24308/23-211Z M2000/23-211Z Standard 50 Socket N/A Brass Zinc YP 22-30
M24308/23-213Z M2000/23-213Z Standard 9 Socket N/A Brass Zinc YP 22-30
M24308/23-214Z M2000/23-214Z Standard 15 Socket N/A Brass Zinc YP 22-30
M24308/23-215Z M2000/23-215Z Standard 25 Socket N/A Brass Zinc YP 22-30
M24308/23-216Z M2000/23-216Z Standard 37 Socket N/A Brass Zinc YP 22-30
M24308/23-217Z M2000/23-217Z Standard 50 Socket N/A Brass Zinc YP 22-30
M24308/23-219Z M2000/23-219Z Standard 9 Socket N/A Brass Zinc YP 22-30
M24308/23-220Z M2000/23-220Z Standard 15 Socket N/A Brass Zinc YP 22-30
M24308/23-221Z M2000/23-221Z Standard 25 Socket N/A Brass Zinc YP 22-30
M24308/23-222Z M2000/23-222Z Standard 37 Socket N/A Brass Zinc YP 22-30
M24308/23-223Z M2000/23-223Z Standard 50 Socket N/A Brass Zinc YP 22-30
M24308/23-261Z M2000/23-261Z High Density 15 Socket N/A Brass Zinc YP 22-30
M24308/23-262Z M2000/23-262Z High Density 26 Socket N/A Brass Zinc YP 22-30
M24308/23-263Z M2000/23-263Z High Density 44 Socket N/A Brass Zinc YP 22-30
M24308/23-264Z M2000/23-264Z High Density 62 Socket N/A Brass Zinc YP 22-30
M24308/23-265Z M2000/23-265Z High Density 78 Socket N/A Brass Zinc YP 22-30
M24308/23-266Z M2000/23-266Z High Density 104 Socket N/A Brass Zinc YP 22-30
M24308/23-267Z M2000/23-267Z High Density 15 Socket N/A Brass Zinc YP 22-30
M24308/23-268Z M2000/23-268Z High Density 26 Socket N/A Brass Zinc YP 22-30
M24308/23-269Z M2000/23-269Z High Density 44 Socket N/A Brass Zinc YP 22-30
M24308/23-270Z M2000/23-270Z High Density 62 Socket N/A Brass Zinc YP 22-30
M24308/23-271Z M2000/23-271Z High Density 78 Socket N/A Brass Zinc YP 22-30
M24308/23-272Z M2000/23-272Z High Density 104 Socket N/A Brass Zinc YP 22-30
M24308/23-1K M2000/23-1K Standard 9 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-2K M2000/23-2K Standard 15 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-3K M2000/23-3K Standard 25 Socket N/A Steel Zinc Nickel Black 22-30
Visit amphenolpcd.com for more information
72
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/23-4K M2000/23-4K Standard 37 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-5K M2000/23-5K Standard 50 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-7K M2000/23-7K Standard 9 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-8K M2000/23-8K Standard 15 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-9K M2000/23-9K Standard 25 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-10K M2000/23-10K Standard 37 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-11K M2000/23-11K Standard 50 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-13K M2000/23-13K Standard 9 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-14K M2000/23-14K Standard 15 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-15K M2000/23-15K Standard 25 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-16K M2000/23-16K Standard 37 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-17K M2000/23-17K Standard 50 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-19K M2000/23-19K Standard 9 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-20K M2000/23-20K Standard 15 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-21K M2000/23-21K Standard 25 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-22K M2000/23-22K Standard 37 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-23K M2000/23-23K Standard 50 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-61K M2000/23-61K High Density 15 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-62K M2000/23-62K High Density 26 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-63K M2000/23-63K High Density 44 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-64K M2000/23-64K High Density 62 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-65K M2000/23-65K High Density 78 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-67K M2000/23-67K High Density 15 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-68K M2000/23-68K High Density 26 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-69K M2000/23-69K High Density 44 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-70K M2000/23-70K High Density 62 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-71K M2000/23-71K High Density 78 Socket N/A Steel Zinc Nickel Black 22-30
M24308/23-301 M2000/23-301 Standard 9 Socket N/A Steel Nickel Plating 22-30
M24308/23-302 M2000/23-302 Standard 15 Socket N/A Steel Nickel Plating 22-30
M24308/23-303 M2000/23-303 Standard 25 Socket N/A Steel Nickel Plating 22-30
M24308/23-304 M2000/23-304 Standard 37 Socket N/A Steel Nickel Plating 22-30
M24308/23-305 M2000/23-305 Standard 50 Socket N/A Steel Nickel Plating 22-30
M24308/23-307 M2000/23-307 Standard 9 Socket N/A Steel Nickel Plating 22-30
M24308/23-308 M2000/23-308 Standard 15 Socket N/A Steel Nickel Plating 22-30
M24308/23-309 M2000/23-309 Standard 25 Socket N/A Steel Nickel Plating 22-30
M24308/23-310 M2000/23-310 Standard 37 Socket N/A Steel Nickel Plating 22-30
M24308/23-311 M2000/23-311 Standard 50 Socket N/A Steel Nickel Plating 22-30
M24308/23-313 M2000/23-313 Standard 9 Socket N/A Steel Nickel Plating 22-30
M24308/23-314 M2000/23-314 Standard 15 Socket N/A Steel Nickel Plating 22-30
M24308/23-315 M2000/23-315 Standard 25 Socket N/A Steel Nickel Plating 22-30
M24308/23-316 M2000/23-316 Standard 37 Socket N/A Steel Nickel Plating 22-30
M24308/23-317 M2000/23-317 Standard 50 Socket N/A Steel Nickel Plating 22-30
M24308/23-319 M2000/23-319 Standard 9 Socket N/A Steel Nickel Plating 22-30
M24308/23-320 M2000/23-320 Standard 15 Socket N/A Steel Nickel Plating 22-30
M24308/23-321 M2000/23-321 Standard 25 Socket N/A Steel Nickel Plating 22-30
M24308/23-322 M2000/23-322 Standard 37 Socket N/A Steel Nickel Plating 22-30
Contact dsubs@amphenolpcd.com 73
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/23-323 M2000/23-323 Standard 50 Socket N/A Steel Nickel Plating 22-30
M24308/23-361 M2000/23-361 High Density 15 Socket N/A Steel Nickel Plating 22-30
M24308/23-362 M2000/23-362 High Density 26 Socket N/A Steel Nickel Plating 22-30
M24308/23-363 M2000/23-363 High Density 44 Socket N/A Steel Nickel Plating 22-30
M24308/23-364 M2000/23-364 High Density 62 Socket N/A Steel Nickel Plating 22-30
M24308/23-365 M2000/23-365 High Density 78 Socket N/A Steel Nickel Plating 22-30
M24308/23-367 M2000/23-367 High Density 15 Socket N/A Steel Nickel Plating 22-30
M24308/23-368 M2000/23-368 High Density 26 Socket N/A Steel Nickel Plating 22-30
M24308/23-369 M2000/23-369 High Density 44 Socket N/A Steel Nickel Plating 22-30
M24308/23-370 M2000/23-370 High Density 62 Socket N/A Steel Nickel Plating 22-30
M24308/23-371 M2000/23-371 High Density 78 Socket N/A Steel Nickel Plating 22-30
M24308/23-101 M2000/23-101 Standard 9 Socket N/A Brass Gold Plating 22-30
M24308/23-102 M2000/23-102 Standard 15 Socket N/A Brass Gold Plating 22-30
M24308/23-103 M2000/23-103 Standard 25 Socket N/A Brass Gold Plating 22-30
M24308/23-104 M2000/23-104 Standard 37 Socket N/A Brass Gold Plating 22-30
M24308/23-105 M2000/23-105 Standard 50 Socket N/A Brass Gold Plating 22-30
M24308/23-107 M2000/23-107 Standard 9 Socket N/A Brass Gold Plating 22-30
M24308/23-108 M2000/23-108 Standard 15 Socket N/A Brass Gold Plating 22-30
M24308/23-109 M2000/23-109 Standard 25 Socket N/A Brass Gold Plating 22-30
M24308/23-110 M2000/23-110 Standard 37 Socket N/A Brass Gold Plating 22-30
M24308/23-111 M2000/23-111 Standard 50 Socket N/A Brass Gold Plating 22-30
M24308/23-113 M2000/23-113 Standard 9 Socket N/A Brass Gold Plating 22-30
M24308/23-114 M2000/23-114 Standard 15 Socket N/A Brass Gold Plating 22-30
M24308/23-115 M2000/23-115 Standard 25 Socket N/A Brass Gold Plating 22-30
M24308/23-116 M2000/23-116 Standard 37 Socket N/A Brass Gold Plating 22-30
M24308/23-117 M2000/23-117 Standard 50 Socket N/A Brass Gold Plating 22-30
M24308/23-119 M2000/23-119 Standard 9 Socket N/A Brass Gold Plating 22-30
M24308/23-120 M2000/23-120 Standard 15 Socket N/A Brass Gold Plating 22-30
M24308/23-121 M2000/23-121 Standard 25 Socket N/A Brass Gold Plating 22-30
M24308/23-122 M2000/23-122 Standard 37 Socket N/A Brass Gold Plating 22-30
M24308/23-123 M2000/23-123 Standard 50 Socket N/A Brass Gold Plating 22-30
M24308/23-161 M2000/23-161 High Density 15 Socket N/A Brass Gold Plating 22-30
M24308/23-162 M2000/23-162 High Density 26 Socket N/A Brass Gold Plating 22-30
M24308/23-163 M2000/23-163 High Density 44 Socket N/A Brass Gold Plating 22-30
M24308/23-164 M2000/23-164 High Density 62 Socket N/A Brass Gold Plating 22-30
M24308/23-165 M2000/23-165 High Density 78 Socket N/A Brass Gold Plating 22-30
M24308/23-166 M2000/23-166 High Density 104 Socket N/A Brass Gold Plating 22-30
M24308/23-167 M2000/23-167 High Density 15 Socket N/A Brass Gold Plating 22-30
M24308/23-168 M2000/23-168 High Density 26 Socket N/A Brass Gold Plating 22-30
M24308/23-169 M2000/23-169 High Density 44 Socket N/A Brass Gold Plating 22-30
M24308/23-170 M2000/23-170 High Density 62 Socket N/A Brass Gold Plating 22-30
M24308/23-171 M2000/23-171 High Density 78 Socket N/A Brass Gold Plating 22-30
M24308/23-172 M2000/23-172 High Density 104 Socket N/A Brass Gold Plating 22-30
M24308/24-25F M2000/24-25F Standard 9 Pin N/A Steel Cadmium YP 22-30
M24308/24-26F M2000/24-26F Standard 15 Pin N/A Steel Cadmium YP 22-30
M24308/24-27F M2000/24-27F Standard 25 Pin N/A Steel Cadmium YP 22-30
Visit amphenolpcd.com for more information
74
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/24-28F M2000/24-28F Standard 37 Pin N/A Steel Cadmium YP 22-30
M24308/24-29F M2000/24-29F Standard 50 Pin N/A Steel Cadmium YP 22-30
M24308/24-31F M2000/24-31F Standard 9 Pin N/A Steel Cadmium YP 22-30
M24308/24-32F M2000/24-32F Standard 15 Pin N/A Steel Cadmium YP 22-30
M24308/24-33F M2000/24-33F Standard 25 Pin N/A Steel Cadmium YP 22-30
M24308/24-34F M2000/24-34F Standard 37 Pin N/A Steel Cadmium YP 22-30
M24308/24-35F M2000/24-35F Standard 50 Pin N/A Steel Cadmium YP 22-30
M24308/24-37F M2000/24-37F Standard 9 Pin N/A Steel Cadmium YP 22-30
M24308/24-38F M2000/24-38F Standard 15 Pin N/A Steel Cadmium YP 22-30
M24308/24-39F M2000/24-39F Standard 25 Pin N/A Steel Cadmium YP 22-30
M24308/24-40F M2000/24-40F Standard 37 Pin N/A Steel Cadmium YP 22-30
M24308/24-41F M2000/24-41F Standard 50 Pin N/A Steel Cadmium YP 22-30
M24308/24-43F M2000/24-43F Standard 9 Pin N/A Steel Cadmium YP 22-30
M24308/24-44F M2000/24-44F Standard 15 Pin N/A Steel Cadmium YP 22-30
M24308/24-45F M2000/24-45F Standard 25 Pin N/A Steel Cadmium YP 22-30
M24308/24-46F M2000/24-46F Standard 37 Pin N/A Steel Cadmium YP 22-30
M24308/24-47F M2000/24-47F Standard 50 Pin N/A Steel Cadmium YP 22-30
M24308/24-49F M2000/24-49F Standard 9 Pin N/A Steel Cadmium YP 22-30
M24308/24-50F M2000/24-50F Standard 15 Pin N/A Steel Cadmium YP 22-30
M24308/24-51F M2000/24-51F Standard 25 Pin N/A Steel Cadmium YP 22-30
M24308/24-52F M2000/24-52F Standard 37 Pin N/A Steel Cadmium YP 22-30
M24308/24-53F M2000/24-53F Standard 50 Pin N/A Steel Cadmium YP 22-30
M24308/24-55F M2000/24-55F Standard 9 Pin N/A Steel Cadmium YP 22-30
M24308/24-56F M2000/24-56F Standard 15 Pin N/A Steel Cadmium YP 22-30
M24308/24-57F M2000/24-57F Standard 25 Pin N/A Steel Cadmium YP 22-30
M24308/24-58F M2000/24-58F Standard 37 Pin N/A Steel Cadmium YP 22-30
M24308/24-59F M2000/24-59F Standard 50 Pin N/A Steel Cadmium YP 22-30
M24308/24-73F M2000/24-73F High Density 15 Pin N/A Steel Cadmium YP 22-30
M24308/24-74F M2000/24-74F High Density 26 Pin N/A Steel Cadmium YP 22-30
M24308/24-75F M2000/24-75F High Density 44 Pin N/A Steel Cadmium YP 22-30
M24308/24-76F M2000/24-76F High Density 62 Pin N/A Steel Cadmium YP 22-30
M24308/24-77F M2000/24-77F High Density 78 Pin N/A Steel Cadmium YP 22-30
M24308/24-225F M2000/24-225F Standard 9 Pin N/A Brass Cadmium YP 22-30
M24308/24-226F M2000/24-226F Standard 15 Pin N/A Brass Cadmium YP 22-30
M24308/24-227F M2000/24-227F Standard 25 Pin N/A Brass Cadmium YP 22-30
M24308/24-228F M2000/24-228F Standard 37 Pin N/A Brass Cadmium YP 22-30
M24308/24-229F M2000/24-229F Standard 50 Pin N/A Brass Cadmium YP 22-30
M24308/24-231F M2000/24-231F Standard 9 Pin N/A Brass Cadmium YP 22-30
M24308/24-232F M2000/24-232F Standard 15 Pin N/A Brass Cadmium YP 22-30
M24308/24-233F M2000/24-233F Standard 25 Pin N/A Brass Cadmium YP 22-30
M24308/24-234F M2000/24-234F Standard 37 Pin N/A Brass Cadmium YP 22-30
M24308/24-235F M2000/24-235F Standard 50 Pin N/A Brass Cadmium YP 22-30
M24308/24-237F M2000/24-237F Standard 9 Pin N/A Brass Cadmium YP 22-30
M24308/24-238F M2000/24-238F Standard 15 Pin N/A Brass Cadmium YP 22-30
M24308/24-239F M2000/24-239F Standard 25 Pin N/A Brass Cadmium YP 22-30
M24308/24-240F M2000/24-240F Standard 37 Pin N/A Brass Cadmium YP 22-30
Contact dsubs@amphenolpcd.com 75
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/24-241F M2000/24-241F Standard 50 Pin N/A Brass Cadmium YP 22-30
M24308/24-243F M2000/24-243F Standard 9 Pin N/A Brass Cadmium YP 22-30
M24308/24-244F M2000/24-244F Standard 15 Pin N/A Brass Cadmium YP 22-30
M24308/24-245F M2000/24-245F Standard 25 Pin N/A Brass Cadmium YP 22-30
M24308/24-246F M2000/24-246F Standard 37 Pin N/A Brass Cadmium YP 22-30
M24308/24-247F M2000/24-247F Standard 50 Pin N/A Brass Cadmium YP 22-30
M24308/24-249F M2000/24-249F Standard 9 Pin N/A Brass Cadmium YP 22-30
M24308/24-250F M2000/24-250F Standard 15 Pin N/A Brass Cadmium YP 22-30
M24308/24-251F M2000/24-251F Standard 25 Pin N/A Brass Cadmium YP 22-30
M24308/24-252F M2000/24-252F Standard 37 Pin N/A Brass Cadmium YP 22-30
M24308/24-253F M2000/24-253F Standard 50 Pin N/A Brass Cadmium YP 22-30
M24308/24-255F M2000/24-255F Standard 9 Pin N/A Brass Cadmium YP 22-30
M24308/24-256F M2000/24-256F Standard 15 Pin N/A Brass Cadmium YP 22-30
M24308/24-257F M2000/24-257F Standard 25 Pin N/A Brass Cadmium YP 22-30
M24308/24-258F M2000/24-258F Standard 37 Pin N/A Brass Cadmium YP 22-30
M24308/24-259F M2000/24-259F Standard 50 Pin N/A Brass Cadmium YP 22-30
M24308/24-273F M2000/24-273F High Density 15 Pin N/A Brass Cadmium YP 22-30
M24308/24-274F M2000/24-274F High Density 26 Pin N/A Brass Cadmium YP 22-30
M24308/24-275F M2000/24-275F High Density 44 Pin N/A Brass Cadmium YP 22-30
M24308/24-276F M2000/24-276F High Density 62 Pin N/A Brass Cadmium YP 22-30
M24308/24-277F M2000/24-277F High Density 78 Pin N/A Brass Cadmium YP 22-30
M24308/24-25Z M2000/24-25Z Standard 9 Pin N/A Steel Zinc YP 22-30
M24308/24-26Z M2000/24-26Z Standard 15 Pin N/A Steel Zinc YP 22-30
M24308/24-27Z M2000/24-27Z Standard 25 Pin N/A Steel Zinc YP 22-30
M24308/24-28Z M2000/24-28Z Standard 37 Pin N/A Steel Zinc YP 22-30
M24308/24-29Z M2000/24-29Z Standard 50 Pin N/A Steel Zinc YP 22-30
M24308/24-31Z M2000/24-31Z Standard 9 Pin N/A Steel Zinc YP 22-30
M24308/24-32Z M2000/24-32Z Standard 15 Pin N/A Steel Zinc YP 22-30
M24308/24-33Z M2000/24-33Z Standard 25 Pin N/A Steel Zinc YP 22-30
M24308/24-34Z M2000/24-34Z Standard 37 Pin N/A Steel Zinc YP 22-30
M24308/24-35Z M2000/24-35Z Standard 50 Pin N/A Steel Zinc YP 22-30
M24308/24-37Z M2000/24-37Z Standard 9 Pin N/A Steel Zinc YP 22-30
M24308/24-38Z M2000/24-38Z Standard 15 Pin N/A Steel Zinc YP 22-30
M24308/24-39Z M2000/24-39Z Standard 25 Pin N/A Steel Zinc YP 22-30
M24308/24-40Z M2000/24-40Z Standard 37 Pin N/A Steel Zinc YP 22-30
M24308/24-41Z M2000/24-41Z Standard 50 Pin N/A Steel Zinc YP 22-30
M24308/24-43Z M2000/24-43Z Standard 9 Pin N/A Steel Zinc YP 22-30
M24308/24-44Z M2000/24-44Z Standard 15 Pin N/A Steel Zinc YP 22-30
M24308/24-45Z M2000/24-45Z Standard 25 Pin N/A Steel Zinc YP 22-30
M24308/24-46Z M2000/24-46Z Standard 37 Pin N/A Steel Zinc YP 22-30
M24308/24-47Z M2000/24-47Z Standard 50 Pin N/A Steel Zinc YP 22-30
M24308/24-49Z M2000/24-49Z Standard 9 Pin N/A Steel Zinc YP 22-30
M24308/24-50Z M2000/24-50Z Standard 15 Pin N/A Steel Zinc YP 22-30
M24308/24-51Z M2000/24-51Z Standard 25 Pin N/A Steel Zinc YP 22-30
M24308/24-52Z M2000/24-52Z Standard 37 Pin N/A Steel Zinc YP 22-30
M24308/24-53Z M2000/24-53Z Standard 50 Pin N/A Steel Zinc YP 22-30
Visit amphenolpcd.com for more information
76
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/24-55Z M2000/24-55Z Standard 9 Pin N/A Steel Zinc YP 22-30
M24308/24-56Z M2000/24-56Z Standard 15 Pin N/A Steel Zinc YP 22-30
M24308/24-57Z M2000/24-57Z Standard 25 Pin N/A Steel Zinc YP 22-30
M24308/24-58Z M2000/24-58Z Standard 37 Pin N/A Steel Zinc YP 22-30
M24308/24-59Z M2000/24-59Z Standard 50 Pin N/A Steel Zinc YP 22-30
M24308/24-73Z M2000/24-73Z High Density 15 Pin N/A Steel Zinc YP 22-30
M24308/24-74Z M2000/24-74Z High Density 26 Pin N/A Steel Zinc YP 22-30
M24308/24-75Z M2000/24-75Z High Density 44 Pin N/A Steel Zinc YP 22-30
M24308/24-76Z M2000/24-76Z High Density 62 Pin N/A Steel Zinc YP 22-30
M24308/24-77Z M2000/24-77Z High Density 78 Pin N/A Steel Zinc YP 22-30
M24308/24-225Z M2000/24-225Z Standard 9 Pin N/A Brass Zinc YP 22-30
M24308/24-226Z M2000/24-226Z Standard 15 Pin N/A Brass Zinc YP 22-30
M24308/24-227Z M2000/24-227Z Standard 25 Pin N/A Brass Zinc YP 22-30
M24308/24-228Z M2000/24-228Z Standard 37 Pin N/A Brass Zinc YP 22-30
M24308/24-229Z M2000/24-229Z Standard 50 Pin N/A Brass Zinc YP 22-30
M24308/24-231Z M2000/24-231Z Standard 9 Pin N/A Brass Zinc YP 22-30
M24308/24-232Z M2000/24-232Z Standard 15 Pin N/A Brass Zinc YP 22-30
M24308/24-233Z M2000/24-233Z Standard 25 Pin N/A Brass Zinc YP 22-30
M24308/24-234Z M2000/24-234Z Standard 37 Pin N/A Brass Zinc YP 22-30
M24308/24-235Z M2000/24-235Z Standard 50 Pin N/A Brass Zinc YP 22-30
M24308/24-237Z M2000/24-237Z Standard 9 Pin N/A Brass Zinc YP 22-30
M24308/24-238Z M2000/24-238Z Standard 15 Pin N/A Brass Zinc YP 22-30
M24308/24-239Z M2000/24-239Z Standard 25 Pin N/A Brass Zinc YP 22-30
M24308/24-240Z M2000/24-240Z Standard 37 Pin N/A Brass Zinc YP 22-30
M24308/24-241Z M2000/24-241Z Standard 50 Pin N/A Brass Zinc YP 22-30
M24308/24-243Z M2000/24-243Z Standard 9 Pin N/A Brass Zinc YP 22-30
M24308/24-244Z M2000/24-244Z Standard 15 Pin N/A Brass Zinc YP 22-30
M24308/24-245Z M2000/24-245Z Standard 25 Pin N/A Brass Zinc YP 22-30
M24308/24-246Z M2000/24-246Z Standard 37 Pin N/A Brass Zinc YP 22-30
M24308/24-247Z M2000/24-247Z Standard 50 Pin N/A Brass Zinc YP 22-30
M24308/24-249Z M2000/24-249Z Standard 9 Pin N/A Brass Zinc YP 22-30
M24308/24-250Z M2000/24-250Z Standard 15 Pin N/A Brass Zinc YP 22-30
M24308/24-251Z M2000/24-251Z Standard 25 Pin N/A Brass Zinc YP 22-30
M24308/24-252Z M2000/24-252Z Standard 37 Pin N/A Brass Zinc YP 22-30
M24308/24-253Z M2000/24-253Z Standard 50 Pin N/A Brass Zinc YP 22-30
M24308/24-255Z M2000/24-255Z Standard 9 Pin N/A Brass Zinc YP 22-30
M24308/24-256Z M2000/24-256Z Standard 15 Pin N/A Brass Zinc YP 22-30
M24308/24-257Z M2000/24-257Z Standard 25 Pin N/A Brass Zinc YP 22-30
M24308/24-258Z M2000/24-258Z Standard 37 Pin N/A Brass Zinc YP 22-30
M24308/24-259Z M2000/24-259Z Standard 50 Pin N/A Brass Zinc YP 22-30
M24308/24-273Z M2000/24-273Z High Density 15 Pin N/A Brass Zinc YP 22-30
M24308/24-274Z M2000/24-274Z High Density 26 Pin N/A Brass Zinc YP 22-30
M24308/24-275Z M2000/24-275Z High Density 44 Pin N/A Brass Zinc YP 22-30
M24308/24-276Z M2000/24-276Z High Density 62 Pin N/A Brass Zinc YP 22-30
M24308/24-277Z M2000/24-277Z High Density 78 Pin N/A Brass Zinc YP 22-30
M24308/24-25K M2000/24-25K Standard 9 Pin N/A Steel Zinc Nickel 22-30
Contact dsubs@amphenolpcd.com 77
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/24-26K M2000/24-26K Standard 15 Pin N/A Steel Zinc Nickel 22-30
M24308/24-27K M2000/24-27K Standard 25 Pin N/A Steel Zinc Nickel 22-30
M24308/24-28K M2000/24-28K Standard 37 Pin N/A Steel Zinc Nickel 22-30
M24308/24-29K M2000/24-29K Standard 50 Pin N/A Steel Zinc Nickel 22-30
M24308/24-31K M2000/24-31K Standard 9 Pin N/A Steel Zinc Nickel 22-30
M24308/24-32K M2000/24-32K Standard 15 Pin N/A Steel Zinc Nickel 22-30
M24308/24-33K M2000/24-33K Standard 25 Pin N/A Steel Zinc Nickel 22-30
M24308/24-34K M2000/24-34K Standard 37 Pin N/A Steel Zinc Nickel 22-30
M24308/24-35K M2000/24-35K Standard 50 Pin N/A Steel Zinc Nickel 22-30
M24308/24-37K M2000/24-37K Standard 9 Pin N/A Steel Zinc Nickel 22-30
M24308/24-38K M2000/24-38K Standard 15 Pin N/A Steel Zinc Nickel 22-30
M24308/24-39K M2000/24-39K Standard 25 Pin N/A Steel Zinc Nickel 22-30
M24308/24-40K M2000/24-40K Standard 37 Pin N/A Steel Zinc Nickel 22-30
M24308/24-41K M2000/24-41K Standard 50 Pin N/A Steel Zinc Nickel 22-30
M24308/24-43K M2000/24-43K Standard 9 Pin N/A Steel Zinc Nickel 22-30
M24308/24-44K M2000/24-44K Standard 15 Pin N/A Steel Zinc Nickel 22-30
M24308/24-45K M2000/24-45K Standard 25 Pin N/A Steel Zinc Nickel 22-30
M24308/24-46K M2000/24-46K Standard 37 Pin N/A Steel Zinc Nickel 22-30
M24308/24-47K M2000/24-47K Standard 50 Pin N/A Steel Zinc Nickel 22-30
M24308/24-49K M2000/24-49K Standard 9 Pin N/A Steel Zinc Nickel 22-30
M24308/24-50K M2000/24-50K Standard 15 Pin N/A Steel Zinc Nickel 22-30
M24308/24-51K M2000/24-51K Standard 25 Pin N/A Steel Zinc Nickel 22-30
M24308/24-52K M2000/24-52K Standard 37 Pin N/A Steel Zinc Nickel 22-30
M24308/24-53K M2000/24-53K Standard 50 Pin N/A Steel Zinc Nickel 22-30
M24308/24-55K M2000/24-55K Standard 9 Pin N/A Steel Zinc Nickel 22-30
M24308/24-56K M2000/24-56K Standard 15 Pin N/A Steel Zinc Nickel 22-30
M24308/24-57K M2000/24-57K Standard 25 Pin N/A Steel Zinc Nickel 22-30
M24308/24-58K M2000/24-58K Standard 37 Pin N/A Steel Zinc Nickel 22-30
M24308/24-59K M2000/24-59K Standard 50 Pin N/A Steel Zinc Nickel 22-30
M24308/24-73K M2000/24-73K High Density 15 Pin N/A Steel Zinc Nickel 22-30
M24308/24-74K M2000/24-74K High Density 26 Pin N/A Steel Zinc Nickel 22-30
M24308/24-75K M2000/24-75K High Density 44 Pin N/A Steel Zinc Nickel 22-30
M24308/24-76K M2000/24-76K High Density 62 Pin N/A Steel Zinc Nickel 22-30
M24308/24-77K M2000/24-77K High Density 78 Pin N/A Steel Zinc Nickel 22-30
M24308/24-325 M2000/24-325 Standard 9 Pin N/A Steel Nickel Plating 22-30
M24308/24-326 M2000/24-326 Standard 15 Pin N/A Steel Nickel Plating 22-30
M24308/24-327 M2000/24-327 Standard 25 Pin N/A Steel Nickel Plating 22-30
M24308/24-328 M2000/24-328 Standard 37 Pin N/A Steel Nickel Plating 22-30
M24308/24-329 M2000/24-329 Standard 50 Pin N/A Steel Nickel Plating 22-30
M24308/24-331 M2000/24-331 Standard 9 Pin N/A Steel Nickel Plating 22-30
M24308/24-332 M2000/24-332 Standard 15 Pin N/A Steel Nickel Plating 22-30
M24308/24-333 M2000/24-333 Standard 25 Pin N/A Steel Nickel Plating 22-30
M24308/24-334 M2000/24-334 Standard 37 Pin N/A Steel Nickel Plating 22-30
M24308/24-335 M2000/24-335 Standard 50 Pin N/A Steel Nickel Plating 22-30
M24308/24-337 M2000/24-337 Standard 9 Pin N/A Steel Nickel Plating 22-30
M24308/24-338 M2000/24-338 Standard 15 Pin N/A Steel Nickel Plating 22-30
Visit amphenolpcd.com for more information
78
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/24-339 M2000/24-339 Standard 25 Pin N/A Steel Nickel Plating 22-30
M24308/24-340 M2000/24-340 Standard 37 Pin N/A Steel Nickel Plating 22-30
M24308/24-341 M2000/24-341 Standard 50 Pin N/A Steel Nickel Plating 22-30
M24308/24-343 M2000/24-343 Standard 9 Pin N/A Steel Nickel Plating 22-30
M24308/24-344 M2000/24-344 Standard 15 Pin N/A Steel Nickel Plating 22-30
M24308/24-345 M2000/24-345 Standard 25 Pin N/A Steel Nickel Plating 22-30
M24308/24-346 M2000/24-346 Standard 37 Pin N/A Steel Nickel Plating 22-30
M24308/24-347 M2000/24-347 Standard 50 Pin N/A Steel Nickel Plating 22-30
M24308/24-349 M2000/24-349 Standard 9 Pin N/A Steel Nickel Plating 22-30
M24308/24-350 M2000/24-350 Standard 15 Pin N/A Steel Nickel Plating 22-30
M24308/24-351 M2000/24-351 Standard 25 Pin N/A Steel Nickel Plating 22-30
M24308/24-352 M2000/24-352 Standard 37 Pin N/A Steel Nickel Plating 22-30
M24308/24-353 M2000/24-353 Standard 50 Pin N/A Steel Nickel Plating 22-30
M24308/24-355 M2000/24-355 Standard 9 Pin N/A Steel Nickel Plating 22-30
M24308/24-356 M2000/24-356 Standard 15 Pin N/A Steel Nickel Plating 22-30
M24308/24-357 M2000/24-357 Standard 25 Pin N/A Steel Nickel Plating 22-30
M24308/24-358 M2000/24-358 Standard 37 Pin N/A Steel Nickel Plating 22-30
M24308/24-359 M2000/24-359 Standard 50 Pin N/A Steel Nickel Plating 22-30
M24308/24-373 M2000/24-373 High Density 15 Pin N/A Steel Nickel Plating 22-30
M24308/24-374 M2000/24-374 High Density 26 Pin N/A Steel Nickel Plating 22-30
M24308/24-375 M2000/24-375 High Density 44 Pin N/A Steel Nickel Plating 22-30
M24308/24-376 M2000/24-376 High Density 62 Pin N/A Steel Nickel Plating 22-30
M24308/24-377 M2000/24-377 High Density 78 Pin N/A Steel Nickel Plating 22-30
M24308/24-125 M2000/24-125 Standard 9 Pin N/A Brass Gold Plating 22-30
M24308/24-126 M2000/24-126 Standard 15 Pin N/A Brass Gold Plating 22-30
M24308/24-127 M2000/24-127 Standard 25 Pin N/A Brass Gold Plating 22-30
M24308/24-128 M2000/24-128 Standard 37 Pin N/A Brass Gold Plating 22-30
M24308/24-129 M2000/24-129 Standard 50 Pin N/A Brass Gold Plating 22-30
M24308/24-131 M2000/24-131 Standard 9 Pin N/A Brass Gold Plating 22-30
M24308/24-132 M2000/24-132 Standard 15 Pin N/A Brass Gold Plating 22-30
M24308/24-133 M2000/24-133 Standard 25 Pin N/A Brass Gold Plating 22-30
M24308/24-134 M2000/24-134 Standard 37 Pin N/A Brass Gold Plating 22-30
M24308/24-135 M2000/24-135 Standard 50 Pin N/A Brass Gold Plating 22-30
M24308/24-137 M2000/24-137 Standard 9 Pin N/A Brass Gold Plating 22-30
M24308/24-138 M2000/24-138 Standard 15 Pin N/A Brass Gold Plating 22-30
M24308/24-139 M2000/24-139 Standard 25 Pin N/A Brass Gold Plating 22-30
M24308/24-140 M2000/24-140 Standard 37 Pin N/A Brass Gold Plating 22-30
M24308/24-141 M2000/24-141 Standard 50 Pin N/A Brass Gold Plating 22-30
M24308/24-143 M2000/24-143 Standard 9 Pin N/A Brass Gold Plating 22-30
M24308/24-144 M2000/24-144 Standard 15 Pin N/A Brass Gold Plating 22-30
M24308/24-145 M2000/24-145 Standard 25 Pin N/A Brass Gold Plating 22-30
M24308/24-146 M2000/24-146 Standard 37 Pin N/A Brass Gold Plating 22-30
M24308/24-147 M2000/24-147 Standard 50 Pin N/A Brass Gold Plating 22-30
M24308/24-149 M2000/24-149 Standard 9 Pin N/A Brass Gold Plating 22-30
M24308/24-150 M2000/24-150 Standard 15 Pin N/A Brass Gold Plating 22-30
M24308/24-151 M2000/24-151 Standard 25 Pin N/A Brass Gold Plating 22-30
Contact dsubs@amphenolpcd.com 79
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/24-152 M2000/24-152 Standard 37 Pin N/A Brass Gold Plating 22-30
M24308/24-153 M2000/24-153 Standard 50 Pin N/A Brass Gold Plating 22-30
M24308/24-155 M2000/24-155 Standard 9 Pin N/A Brass Gold Plating 22-30
M24308/24-156 M2000/24-156 Standard 15 Pin N/A Brass Gold Plating 22-30
M24308/24-157 M2000/24-157 Standard 25 Pin N/A Brass Gold Plating 22-30
M24308/24-158 M2000/24-158 Standard 37 Pin N/A Brass Gold Plating 22-30
M24308/24-159 M2000/24-159 Standard 50 Pin N/A Brass Gold Plating 22-30
M24308/24-173 M2000/24-173 High Density 15 Pin N/A Brass Gold Plating 22-30
M24308/24-174 M2000/24-174 High Density 26 Pin N/A Brass Gold Plating 22-30
M24308/24-175 M2000/24-175 High Density 44 Pin N/A Brass Gold Plating 22-30
M24308/24-176 M2000/24-176 High Density 62 Pin N/A Brass Gold Plating 22-30
M24308/24-177 M2000/24-177 High Density 78 Pin N/A Brass Gold Plating 22-30
M24308/24-1F M2000/24-1F Standard 9 Pin N/A Steel Cadmium YP 22-30
M24308/24-2F M2000/24-2F Standard 15 Pin N/A Steel Cadmium YP 22-30
M24308/24-3F M2000/24-3F Standard 25 Pin N/A Steel Cadmium YP 22-30
M24308/24-4F M2000/24-4F Standard 37 Pin N/A Steel Cadmium YP 22-30
M24308/24-5F M2000/24-5F Standard 50 Pin N/A Steel Cadmium YP 22-30
M24308/24-7F M2000/24-7F Standard 9 Pin N/A Steel Cadmium YP 22-30
M24308/24-8F M2000/24-8F Standard 15 Pin N/A Steel Cadmium YP 22-30
M24308/24-9F M2000/24-9F Standard 25 Pin N/A Steel Cadmium YP 22-30
M24308/24-10F M2000/24-10F Standard 37 Pin N/A Steel Cadmium YP 22-30
M24308/24-11F M2000/24-11F Standard 50 Pin N/A Steel Cadmium YP 22-30
M24308/24-13F M2000/24-13F Standard 9 Pin N/A Steel Cadmium YP 22-30
M24308/24-14F M2000/24-14F Standard 15 Pin N/A Steel Cadmium YP 22-30
M24308/24-15F M2000/24-15F Standard 25 Pin N/A Steel Cadmium YP 22-30
M24308/24-16F M2000/24-16F Standard 37 Pin N/A Steel Cadmium YP 22-30
M24308/24-17F M2000/24-17F Standard 50 Pin N/A Steel Cadmium YP 22-30
M24308/24-19F M2000/24-19F Standard 9 Pin N/A Steel Cadmium YP 22-30
M24308/24-20F M2000/24-20F Standard 15 Pin N/A Steel Cadmium YP 22-30
M24308/24-21F M2000/24-21F Standard 25 Pin N/A Steel Cadmium YP 22-30
M24308/24-22F M2000/24-22F Standard 37 Pin N/A Steel Cadmium YP 22-30
M24308/24-23F M2000/24-23F Standard 50 Pin N/A Steel Cadmium YP 22-30
M24308/24-61F M2000/24-61F High Density 15 Pin N/A Steel Cadmium YP 22-30
M24308/24-62F M2000/24-62F High Density 26 Pin N/A Steel Cadmium YP 22-30
M24308/24-63F M2000/24-63F High Density 44 Pin N/A Steel Cadmium YP 22-30
M24308/24-64F M2000/24-64F High Density 62 Pin N/A Steel Cadmium YP 22-30
M24308/24-65F M2000/24-65F High Density 78 Pin N/A Steel Cadmium YP 22-30
M24308/24-67F M2000/24-67F High Density 15 Pin N/A Steel Cadmium YP 22-30
M24308/24-68F M2000/24-68F High Density 26 Pin N/A Steel Cadmium YP 22-30
M24308/24-69F M2000/24-69F High Density 44 Pin N/A Steel Cadmium YP 22-30
M24308/24-70F M2000/24-70F High Density 62 Pin N/A Steel Cadmium YP 22-30
M24308/24-71F M2000/24-71F High Density 78 Pin N/A Steel Cadmium YP 22-30
M24308/24-201F M2000/24-201F Standard 9 Pin N/A Brass Cadmium YP 22-30
M24308/24-202F M2000/24-202F Standard 15 Pin N/A Brass Cadmium YP 22-30
M24308/24-203F M2000/24-203F Standard 25 Pin N/A Brass Cadmium YP 22-30
M24308/24-204F M2000/24-204F Standard 37 Pin N/A Brass Cadmium YP 22-30
Visit amphenolpcd.com for more information
80
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/24-205F M2000/24-205F Standard 50 Pin N/A Brass Cadmium YP 22-30
M24308/24-207F M2000/24-207F Standard 9 Pin N/A Brass Cadmium YP 22-30
M24308/24-208F M2000/24-208F Standard 15 Pin N/A Brass Cadmium YP 22-30
M24308/24-209F M2000/24-209F Standard 25 Pin N/A Brass Cadmium YP 22-30
M24308/24-210F M2000/24-210F Standard 37 Pin N/A Brass Cadmium YP 22-30
M24308/24-211F M2000/24-211F Standard 50 Pin N/A Brass Cadmium YP 22-30
M24308/24-213F M2000/24-213F Standard 9 Pin N/A Brass Cadmium YP 22-30
M24308/24-214F M2000/24-214F Standard 15 Pin N/A Brass Cadmium YP 22-30
M24308/24-215F M2000/24-215F Standard 25 Pin N/A Brass Cadmium YP 22-30
M24308/24-216F M2000/24-216F Standard 37 Pin N/A Brass Cadmium YP 22-30
M24308/24-217F M2000/24-217F Standard 50 Pin N/A Brass Cadmium YP 22-30
M24308/24-219F M2000/24-219F Standard 9 Pin N/A Brass Cadmium YP 22-30
M24308/24-220F M2000/24-220F Standard 15 Pin N/A Brass Cadmium YP 22-30
M24308/24-221F M2000/24-221F Standard 25 Pin N/A Brass Cadmium YP 22-30
M24308/24-222F M2000/24-222F Standard 37 Pin N/A Brass Cadmium YP 22-30
M24308/24-223F M2000/24-223F Standard 50 Pin N/A Brass Cadmium YP 22-30
M24308/24-261F M2000/24-261F High Density 15 Pin N/A Brass Cadmium YP 22-30
M24308/24-262F M2000/24-262F High Density 26 Pin N/A Brass Cadmium YP 22-30
M24308/24-263F M2000/24-263F High Density 44 Pin N/A Brass Cadmium YP 22-30
M24308/24-264F M2000/24-264F High Density 62 Pin N/A Brass Cadmium YP 22-30
M24308/24-265F M2000/24-265F High Density 78 Pin N/A Brass Cadmium YP 22-30
M24308/24-267F M2000/24-267F High Density 15 Pin N/A Brass Cadmium YP 22-30
M24308/24-268F M2000/24-268F High Density 26 Pin N/A Brass Cadmium YP 22-30
M24308/24-269F M2000/24-269F High Density 44 Pin N/A Brass Cadmium YP 22-30
M24308/24-270F M2000/24-270F High Density 62 Pin N/A Brass Cadmium YP 22-30
M24308/24-271F M2000/24-271F High Density 78 Pin N/A Brass Cadmium YP 22-30
M24308/24-1Z M2000/24-1Z Standard 9 Pin N/A Steel Zinc YP 22-30
M24308/24-2Z M2000/24-2Z Standard 15 Pin N/A Steel Zinc YP 22-30
M24308/24-3Z M2000/24-3Z Standard 25 Pin N/A Steel Zinc YP 22-30
M24308/24-4Z M2000/24-4Z Standard 37 Pin N/A Steel Zinc YP 22-30
M24308/24-5Z M2000/24-5Z Standard 50 Pin N/A Steel Zinc YP 22-30
M24308/24-7Z M2000/24-7Z Standard 9 Pin N/A Steel Zinc YP 22-30
M24308/24-8Z M2000/24-8Z Standard 15 Pin N/A Steel Zinc YP 22-30
M24308/24-9Z M2000/24-9Z Standard 25 Pin N/A Steel Zinc YP 22-30
M24308/24-10Z M2000/24-10Z Standard 37 Pin N/A Steel Zinc YP 22-30
M24308/24-11Z M2000/24-11Z Standard 50 Pin N/A Steel Zinc YP 22-30
M24308/24-13Z M2000/24-13Z Standard 9 Pin N/A Steel Zinc YP 22-30
M24308/24-14Z M2000/24-14Z Standard 15 Pin N/A Steel Zinc YP 22-30
M24308/24-15Z M2000/24-15Z Standard 25 Pin N/A Steel Zinc YP 22-30
M24308/24-16Z M2000/24-16Z Standard 37 Pin N/A Steel Zinc YP 22-30
M24308/24-17Z M2000/24-17Z Standard 50 Pin N/A Steel Zinc YP 22-30
M24308/24-19Z M2000/24-19Z Standard 9 Pin N/A Steel Zinc YP 22-30
M24308/24-20Z M2000/24-20Z Standard 15 Pin N/A Steel Zinc YP 22-30
M24308/24-21Z M2000/24-21Z Standard 25 Pin N/A Steel Zinc YP 22-30
M24308/24-22Z M2000/24-22Z Standard 37 Pin N/A Steel Zinc YP 22-30
M24308/24-23Z M2000/24-23Z Standard 50 Pin N/A Steel Zinc YP 22-30
Contact dsubs@amphenolpcd.com 81
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/24-61Z M2000/24-61Z High Density 15 Pin N/A Steel Zinc YP 22-30
M24308/24-62Z M2000/24-62Z High Density 26 Pin N/A Steel Zinc YP 22-30
M24308/24-63Z M2000/24-63Z High Density 44 Pin N/A Steel Zinc YP 22-30
M24308/24-64Z M2000/24-64Z High Density 62 Pin N/A Steel Zinc YP 22-30
M24308/24-65Z M2000/24-65Z High Density 78 Pin N/A Steel Zinc YP 22-30
M24308/24-66Z M2000/24-66Z High Density 104 Pin N/A Steel Zinc YP 22-30
M24308/24-67Z M2000/24-67Z High Density 15 Pin N/A Steel Zinc YP 22-30
M24308/24-68Z M2000/24-68Z High Density 26 Pin N/A Steel Zinc YP 22-30
M24308/24-69Z M2000/24-69Z High Density 44 Pin N/A Steel Zinc YP 22-30
M24308/24-70Z M2000/24-70Z High Density 62 Pin N/A Steel Zinc YP 22-30
M24308/24-71Z M2000/24-71Z High Density 78 Pin N/A Steel Zinc YP 22-30
M24308/24-72Z M2000/24-72Z High Density 104 Pin N/A Steel Zinc YP 22-30
M24308/24-201Z M2000/24-201Z Standard 9 Pin N/A Brass Zinc YP 22-30
M24308/24-202Z M2000/24-202Z Standard 15 Pin N/A Brass Zinc YP 22-30
M24308/24-203Z M2000/24-203Z Standard 25 Pin N/A Brass Zinc YP 22-30
M24308/24-204Z M2000/24-204Z Standard 37 Pin N/A Brass Zinc YP 22-30
M24308/24-205Z M2000/24-205Z Standard 50 Pin N/A Brass Zinc YP 22-30
M24308/24-207Z M2000/24-207Z Standard 9 Pin N/A Brass Zinc YP 22-30
M24308/24-208Z M2000/24-208Z Standard 15 Pin N/A Brass Zinc YP 22-30
M24308/24-209Z M2000/24-209Z Standard 25 Pin N/A Brass Zinc YP 22-30
M24308/24-210Z M2000/24-210Z Standard 37 Pin N/A Brass Zinc YP 22-30
M24308/24-211Z M2000/24-211Z Standard 50 Pin N/A Brass Zinc YP 22-30
M24308/24-213Z M2000/24-213Z Standard 9 Pin N/A Brass Zinc YP 22-30
M24308/24-214Z M2000/24-214Z Standard 15 Pin N/A Brass Zinc YP 22-30
M24308/24-215Z M2000/24-215Z Standard 25 Pin N/A Brass Zinc YP 22-30
M24308/24-216Z M2000/24-216Z Standard 37 Pin N/A Brass Zinc YP 22-30
M24308/24-217Z M2000/24-217Z Standard 50 Pin N/A Brass Zinc YP 22-30
M24308/24-219Z M2000/24-219Z Standard 9 Pin N/A Brass Zinc YP 22-30
M24308/24-220Z M2000/24-220Z Standard 15 Pin N/A Brass Zinc YP 22-30
M24308/24-221Z M2000/24-221Z Standard 25 Pin N/A Brass Zinc YP 22-30
M24308/24-222Z M2000/24-222Z Standard 37 Pin N/A Brass Zinc YP 22-30
M24308/24-223Z M2000/24-223Z Standard 50 Pin N/A Brass Zinc YP 22-30
M24308/24-261Z M2000/24-261Z High Density 15 Pin N/A Brass Zinc YP 22-30
M24308/24-262Z M2000/24-262Z High Density 26 Pin N/A Brass Zinc YP 22-30
M24308/24-263Z M2000/24-263Z High Density 44 Pin N/A Brass Zinc YP 22-30
M24308/24-264Z M2000/24-264Z High Density 62 Pin N/A Brass Zinc YP 22-30
M24308/24-265Z M2000/24-265Z High Density 78 Pin N/A Brass Zinc YP 22-30
M24308/24-266Z M2000/24-266Z High Density 104 Pin N/A Brass Zinc YP 22-30
M24308/24-267Z M2000/24-267Z High Density 15 Pin N/A Brass Zinc YP 22-30
M24308/24-268Z M2000/24-268Z High Density 26 Pin N/A Brass Zinc YP 22-30
M24308/24-269Z M2000/24-269Z High Density 44 Pin N/A Brass Zinc YP 22-30
M24308/24-270Z M2000/24-270Z High Density 62 Pin N/A Brass Zinc YP 22-30
M24308/24-271Z M2000/24-271Z High Density 78 Pin N/A Brass Zinc YP 22-30
M24308/24-272Z M2000/24-272Z High Density 104 Pin N/A Brass Zinc YP 22-30
M24308/24-1K M2000/24-1K Standard 9 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-2K M2000/24-2K Standard 15 Pin N/A Steel Zinc Nickel Black 22-30
Visit amphenolpcd.com for more information
82
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/24-3K M2000/24-3K Standard 25 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-4K M2000/24-4K Standard 37 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-5K M2000/24-5K Standard 50 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-7K M2000/24-7K Standard 9 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-8K M2000/24-8K Standard 15 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-9K M2000/24-9K Standard 25 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-10K M2000/24-10K Standard 37 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-11K M2000/24-11K Standard 50 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-13K M2000/24-13K Standard 9 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-14K M2000/24-14K Standard 15 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-15K M2000/24-15K Standard 25 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-16K M2000/24-16K Standard 37 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-17K M2000/24-17K Standard 50 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-19K M2000/24-19K Standard 9 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-20K M2000/24-20K Standard 15 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-21K M2000/24-21K Standard 25 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-22K M2000/24-22K Standard 37 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-23K M2000/24-23K Standard 50 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-61K M2000/24-61K High Density 15 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-62K M2000/24-62K High Density 26 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-63K M2000/24-63K High Density 44 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-64K M2000/24-64K High Density 62 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-65K M2000/24-65K High Density 78 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-67K M2000/24-67K High Density 15 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-68K M2000/24-68K High Density 26 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-69K M2000/24-69K High Density 44 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-70K M2000/24-70K High Density 62 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-71K M2000/24-71K High Density 78 Pin N/A Steel Zinc Nickel Black 22-30
M24308/24-301 M2000/24-301 Standard 9 Pin N/A Steel Nickel Plating 22-30
M24308/24-302 M2000/24-302 Standard 15 Pin N/A Steel Nickel Plating 22-30
M24308/24-303 M2000/24-303 Standard 25 Pin N/A Steel Nickel Plating 22-30
M24308/24-304 M2000/24-304 Standard 37 Pin N/A Steel Nickel Plating 22-30
M24308/24-305 M2000/24-305 Standard 50 Pin N/A Steel Nickel Plating 22-30
M24308/24-307 M2000/24-307 Standard 9 Pin N/A Steel Nickel Plating 22-30
M24308/24-308 M2000/24-308 Standard 15 Pin N/A Steel Nickel Plating 22-30
M24308/24-309 M2000/24-309 Standard 25 Pin N/A Steel Nickel Plating 22-30
M24308/24-310 M2000/24-310 Standard 37 Pin N/A Steel Nickel Plating 22-30
M24308/24-311 M2000/24-311 Standard 50 Pin N/A Steel Nickel Plating 22-30
M24308/24-313 M2000/24-313 Standard 9 Pin N/A Steel Nickel Plating 22-30
M24308/24-314 M2000/24-314 Standard 15 Pin N/A Steel Nickel Plating 22-30
M24308/24-315 M2000/24-315 Standard 25 Pin N/A Steel Nickel Plating 22-30
M24308/24-316 M2000/24-316 Standard 37 Pin N/A Steel Nickel Plating 22-30
M24308/24-317 M2000/24-317 Standard 50 Pin N/A Steel Nickel Plating 22-30
M24308/24-319 M2000/24-319 Standard 9 Pin N/A Steel Nickel Plating 22-30
M24308/24-320 M2000/24-320 Standard 15 Pin N/A Steel Nickel Plating 22-30
M24308/24-321 M2000/24-321 Standard 25 Pin N/A Steel Nickel Plating 22-30
Contact dsubs@amphenolpcd.com 83
Military Manufacturers
Designation Type No. Of Pins *Contact *IR Shell Material Finish Pg.
* Y- Supplied w/ Connector, N: not supplied w/ Connector, N/A: Not Applicable
Finish: YP- Yellow Passivation
M24308/24-322 M2000/24-322 Standard 37 Pin N/A Steel Nickel Plating 22-30
M24308/24-323 M2000/24-323 Standard 50 Pin N/A Steel Nickel Plating 22-30
M24308/24-361 M2000/24-361 High Density 15 Pin N/A Steel Nickel Plating 22-30
M24308/24-362 M2000/24-362 High Density 26 Pin N/A Steel Nickel Plating 22-30
M24308/24-363 M2000/24-363 High Density 44 Pin N/A Steel Nickel Plating 22-30
M24308/24-364 M2000/24-364 High Density 62 Pin N/A Steel Nickel Plating 22-30
M24308/24-365 M2000/24-365 High Density 78 Pin N/A Steel Nickel Plating 22-30
M24308/24-367 M2000/24-367 High Density 15 Pin N/A Steel Nickel Plating 22-30
M24308/24-368 M2000/24-368 High Density 26 Pin N/A Steel Nickel Plating 22-30
M24308/24-369 M2000/24-369 High Density 44 Pin N/A Steel Nickel Plating 22-30
M24308/24-370 M2000/24-370 High Density 62 Pin N/A Steel Nickel Plating 22-30
M24308/24-371 M2000/24-371 High Density 78 Pin N/A Steel Nickel Plating 22-30
M24308/24-101 M2000/24-101 Standard 9 Pin N/A Brass Gold Plating 22-30
M24308/24-102 M2000/24-102 Standard 15 Pin N/A Brass Gold Plating 22-30
M24308/24-103 M2000/24-103 Standard 25 Pin N/A Brass Gold Plating 22-30
M24308/24-104 M2000/24-104 Standard 37 Pin N/A Brass Gold Plating 22-30
M24308/24-105 M2000/24-105 Standard 50 Pin N/A Brass Gold Plating 22-30
M24308/24-107 M2000/24-107 Standard 9 Pin N/A Brass Gold Plating 22-30
M24308/24-108 M2000/24-108 Standard 15 Pin N/A Brass Gold Plating 22-30
M24308/24-109 M2000/24-109 Standard 25 Pin N/A Brass Gold Plating 22-30
M24308/24-110 M2000/24-110 Standard 37 Pin N/A Brass Gold Plating 22-30
M24308/24-111 M2000/24-111 Standard 50 Pin N/A Brass Gold Plating 22-30
M24308/24-113 M2000/24-113 Standard 9 Pin N/A Brass Gold Plating 22-30
M24308/24-114 M2000/24-114 Standard 15 Pin N/A Brass Gold Plating 22-30
M24308/24-115 M2000/24-115 Standard 25 Pin N/A Brass Gold Plating 22-30
M24308/24-116 M2000/24-116 Standard 37 Pin N/A Brass Gold Plating 22-30
M24308/24-117 M2000/24-117 Standard 50 Pin N/A Brass Gold Plating 22-30
M24308/24-119 M2000/24-119 Standard 9 Pin N/A Brass Gold Plating 22-30
M24308/24-120 M2000/24-120 Standard 15 Pin N/A Brass Gold Plating 22-30
M24308/24-121 M2000/24-121 Standard 25 Pin N/A Brass Gold Plating 22-30
M24308/24-122 M2000/24-122 Standard 37 Pin N/A Brass Gold Plating 22-30
M24308/24-123 M2000/24-123 Standard 50 Pin N/A Brass Gold Plating 22-30
M24308/24-161 M2000/24-161 High Density 15 Pin N/A Brass Gold Plating 22-30
M24308/24-162 M2000/24-162 High Density 26 Pin N/A Brass Gold Plating 22-30
M24308/24-163 M2000/24-163 High Density 44 Pin N/A Brass Gold Plating 22-30
M24308/24-164 M2000/24-164 High Density 62 Pin N/A Brass Gold Plating 22-30
M24308/24-165 M2000/24-165 High Density 78 Pin N/A Brass Gold Plating 22-30
M24308/24-166 M2000/24-166 High Density 104 Pin N/A Brass Gold Plating 22-30
M24308/24-167 M2000/24-167 High Density 15 Pin N/A Brass Gold Plating 22-30
M24308/24-168 M2000/24-168 High Density 26 Pin N/A Brass Gold Plating 22-30
M24308/24-169 M2000/24-169 High Density 44 Pin N/A Brass Gold Plating 22-30
M24308/24-170 M2000/24-170 High Density 62 Pin N/A Brass Gold Plating 22-30
M24308/24-171 M2000/24-171 High Density 78 Pin N/A Brass Gold Plating 22-30
M24308/24-172 M2000/24-172 High Density 104 Pin N/A Brass Gold Platin 22-30
Visit amphenolpcd.com for more information
84 Contact dsubs@amphenolpcd.com 84
SPECIAL PRODUCTS
Contact dsubs@amphenolpcd.com 85
STANDARD DENSITY SOLDER-NON ENVIRONMENTAL
Plug w/ Solder Contact
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts A B C D E F G H J K L
M2000/3-1 09 30.43
31.19
16.79
17.04
24.87
25.12
8.23
8.48
12.17
12.93
10.46
10.97
5.82
6.05
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
M2000/3-2 15 38.76
39.52
25.12
25.37
33.20
33.45
27.25
27.76
M2000/3-3 25 52.65
53.42
38.84
39.09
46.91
47.17
10.57
11.07
41.02
41.53
1.27
1.78
0.74
1.25
M2000/3-4 37 68.94
69.70
55.30
55.55
63.37
63.63
57.45
57.96
M2000/3-5 50 66.55
67.31
52.68
52.93
60.99
61.24
11.07
11.33
14.99
15.75
55.07
55.58
13.31
13.82
M2000/ 31F L
Series
Connector Type Dash Number Finish Special Option
3: Plug with Solder Contact
(Fixed Contacts)
1
2
3
4
5
F- Cadmium Yellow Passivation
Z - Zinc Plated
N - Nickel Plated
TI - Tin Plated
K- Zinc Nickel
L- Launch vehicle application
Omit- Standard version
K
* Dimensions A-L: Top # min., Bottom # max.
Visit amphenolpcd.com for more information
86
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts A B C D E F G H J K L
M2000/1-1 09 30.43
31.19
16.21
16.46
24.87
25.12
7.77
8.03
12.17
12.93 10.46
11.15 6.05
6.30
19.02
19.53
10.46
10.97 0.89
1.52
0.51
1.02
M2000/1-2 15 38.76
39.52
24.54
24.79
33.20
33.45
27.25
27.76
M2000/1-3 25 52.65
53.42
38.25
38.51
46.91
47.17
41.02
41.53
0.74
1.25
M2000/1-4 37 68.94
69.70
54.71
54.97
63.37
63.63
57.45
57.96
M2000/1-5 50 66.55
67.31
52.30
52.55
60.99
61.24
10.62
10.87
14.99
15.75
55.07
55.58
13.31
13.82
Receptacle w/ Solder Contact
STANDARD DENSITY SOLDER-NON ENVIRONMENTAL
K
M2000/ 1 1 F L
Series
Connector Type Dash Number Finish Special Option
1: Receptacle with Solder
Contact (Fixed Contacts)
1
2
3
4
5
F- Cadmium Yellow Passivation
Z - Zinc Plated
N - Nickel Plated
TI - Tin Plated
K- Zinc Nickel
L- Launch vehicle application
Omit- Standard version
* Dimensions A-L: Top # min., Bottom # max.
Contact dsubs@amphenolpcd.com 87
STANDARD DENSITY GROMMET-CRIMP
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts
A B C D E F G H J K
± 0.13 ± 0.13 ± 0.13 ± 0.38 ± 0.25 ± 0.38 ± 0.25 ± 0.25 ± 0.15 ± 0.25
M2000/4-1 09 16.92 8.36 24.99 30.81 19.28 12.55 10.72 10.72 5.97 0.76
M2000/4-2 15 25.25 8.36 33.32 39.14 27.51 12.55 10.72 10.72 5.97 0.76
M2000/4-3 25 38.96 8.36 47.04 53.04 41.30 12.55 10.72 10.72 5.97 0.76
M2000/4-4 37 55.42 8.36 63.50 69.32 57.71 12.55 10.72 10.82 5.84 0.99
M2000/4-5 50 52.81 11.20 61.11 66.93 55.32 15.37 13.56 10.82 5.84 0.99
Plug w/ Pin Contact & Grommet-Rear Removable
M2000/ 41G F L
Series
Connector Type Dash Number Grommet Type Finish Special Option
4: Plug Connector with Pin Contact
Crimp Type, Rear Release, Rear
Removable
1
2
3
4
5
G- Silicone Elastomer Grommet
F- Cadmium Yellow Passivation
Z - Zinc Plated
N - Nickel Plated
TI - Tin Plated
L- Launch vehicle application
Omit- Standard version
1.78 MAX.
STD-THROUGH HOLE.
1.24 MAX.
ø 3.05±0.13
MAX.
MAX.
9.53
`J'
`H'
`G'
`F'
15.18
`K'
`C'
`D'
(2 HOLES)
ø 3.05±0.13
`B'
`A'
`E'
Visit amphenolpcd.com for more information
88
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts
A B C D E F G
± 0.13 ± 0.13 ± 0.13 ± 0.38 ± 0.25 ± 0.38 ± 0.25
M2000/2-1 09 16.33 7.90 24.99 30.81 19.28 12.55 10.72
M2000/2-2 15 24.66 7.90 33.32 39.14 27.51 12.55 10.72
M2000/2-3 25 38.38 7.90 47.04 53.04 41.30 12.55 10.72
M2000/2-4 37 54.84 7.90 63.50 69.32 57.71 12.55 10.72
M2000/2-5 50 52.43 10.74 61.1 66.93 55.32 15.37 13.56
Receptacle w/ Pin Contact & Grommet-Rear Removable
STANDARD DENSITY GROMMET-CRIMP
10.90±0.25
0.76±0.25
9.53
6.17±0.13
`F'
`S`
MAX.
STD-THROUGH HOLE.
1.24 MAX.
1.78 MAX.
ø 3.05±0.13
`A'
`C'
`D'
`B'
(2 HOLES)
ø 3.05±0.13
`E'
15.18MAX.
M2000/ 21G F L
Series
Connector Type Dash Number Grommet Type Finish Special Option
2: Receptacle Connector with Re-
ceptacle Contact Crimp Type, Rear
Release, Rear Removable
1
2
3
4
5
G- Silicone Elastomer Grommet
F- Cadmium Yellow Passivation
Z - Zinc Plated
N - Nickel Plated
TI - Tin Plated
L- Launch vehicle application
Omit- Standard version
Contact dsubs@amphenolpcd.com 89
STANDARD DENSITY STRAIGHT PC TAIL
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts A B C D E F G H J K L
M2000/24-1 09 30.43
31.19
16.79
17.04
24.87
25.12
8.48
8.23
12.17
12.93
10.46
10.97
5.82
6.05
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
M2000/24-2 15 38.76
39.52
25.12
25.37
33.20
33.45
27.25
27.76
M2000/24-3 25 52.65
53.42
38.84
39.09
46.91
47.17
10.57
11.07
41.02
41.53
1.27
1.78
0.74
1.25
M2000/24-4 37 68.94
69.70
55.30
55.55
63.37
63.63
57.45
57.96
M2000/24-5 50 66.55
67.31
52.65
52.93
60.99
61.24
11.07
11.33
14.99
15.75
55.07
55.58
13.31
13.82
M2000/ 24 1F CN
Series
Connector Type Dash Number Finish Special Option
24 - Plug Connector
(PC Tail Type)
1
2
3
4
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
IF - With Interfacial Seal
IFCN - With Interfacial Seal & Clinch Nut
FS - Female Screw-lock (Jackpost)
MS - Male Screw-lock
L - Launch Vehicle Option
Omit- Standard version
Plug-Straight PC Tail
PIN 1
‘C’
‘B’
‘A’
3.05+0.13
-
(2 HOLES)
‘D’
0.76+0.02
-
‘F’
‘G’
‘L’
‘J’
‘E’
4.00+0.20
-
5.34+0.20
-
(09 TO 37 PIN)
K
(50 PIN)
‘H’
* Dimensions A-L: Top # min., Bottom # max.
Visit amphenolpcd.com for more information
90
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts A B C D E F G H J K L
M2000/23-1 09 30.43
31.19
16.21
16.46
24.87
25.12
7.77
8.03
12.17
12.93 10.64
11.15
6.05
6.30
19.02
19.53
10.46
10.97 0.89
1.52
0.51
1.02
M2000/23-2 15 38.76
39.52
24.54
24.79
33.20
33.45
27.25
27.76
M2000/23-3 25 52.65
53.42
38.25
38.51
46.91
47.17
41.02
41.53
0.74
1.25
M2000/23-4 37 68.94
69.70
34.71
54.97
63.37
63.63
57.45
57.96
M2000/23-5 50 66.55
67.31
52.30
52.55
60.99
61.24
10.62
10.87
14.99
15.75
55.07
55.58
13.31
13.82
Receptacle-Straight PC Tail
M2000/ 23 1F CN
Series
Connector Type Dash Number Finish Special Option
23 - Receptacle Connector
(PC Tail Type)
1
2
3
4
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
IF - With Interfacial Seal
IFCN - With Interfacial Seal & Clinch Nut
FS - Female Screw-lock (Jackpost)
MS - Male Screw-lock
L - Launch Vehicle Option
Omit- Standard version
*Brass bush (spacer) will be supplied loose with this connector
(Not applicable for connector with clinch nut)
STANDARD DENSITY STRAIGHT PC TAIL
PIN 1
‘C’
‘B’
‘D’
3.05+0.13
-
(2 HOLES)
‘A’
0.76+0.02
-
‘F’
‘G’
‘L’
‘E’
4.00+0.20
-
5.34+0.20
-
‘K’
(50 PIN)
CONNECTOR WITH BRASS BUSH
BRASS BUSH
2 NOS.
6.00
3.20
INTERFACIAL
SEAL
0.76+0.02
-
CLINCH NUT
(4-40OUNC)
PLUG CONNECTOR
WITH INTERFACIAL SEAL
3.75+0.02
-
WITH CLINCH NUT (4 - 40OUNC THREAD)
CONNECTOR
-
* Dimensions A-L: Top # min., Bottom # max.
*
Contact dsubs@amphenolpcd.com 91
STANDARD DENSITY STRAIGHT PC TAIL
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts A B C D E F G H J K L
M2000/24-7 09 30.43
31.19
16.79
17.04
24.87
25.12
8.23
8.48
12.17
12.93
10.46
10.97
5.82
6.05
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
M2000/24-8 15 38.76
39.52
25.12
25.37
33.20
33.45
27.25
27.76
M2000/24-9 25 52.65
53.42
38.84
39.09
46.91
47.17
10.57
11.07
41.02
41.53
1.27
1.78
0.74
1.25
M2000/24-10 37 68.94
69.70
55.30
55.55
63.37
63.63
57.45
57.96
M2000/24-11 50 66.55
67.31
52.65
52.93
60.99
61.24
11.07
11.33
14.99
15.75
55.07
55.58
13.31
13.82
3.05+0.13
-
(2 HOLES)
‘F’
‘G’
‘L’
‘E’
(09 TO 37 PIN)
PIN 1
‘D’
‘C’
‘B’
‘A’
0.76+0.02
-
4.70+0.20
-
5.34+0.20
-
‘J’
(50 PIN)
‘K’
M2000/ 24 7F CN
Series
Connector Type Dash Number Finish Special Option
24 - Plug Connector (PC Tail Type)
7
8
9
10
11
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
IF - With Interfacial Seal
IFCN - With Interfacial Seal & Clinch Nut
FS - Female Screw-lock (Jackpost)
MS - Male Screw-lock
L - Launch Vehicle Option
Omit- Standard version
Plug-Straight PC Tail
* Dimensions A-L: Top # min., Bottom # max.
Visit amphenolpcd.com for more information
92
Receptacle-Straight PC Tail
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts A B C D E F G H J K L
M2000/23-7 09 30.43
31.19
16.21
16.46
24.87
25.12
7.77
8.03
12.17
12.93 10.64
11.15
6.05
6.30
19.02
19.53
10.46
10.97 0.89
1.52
0.51
1.02
M2000/23-8 15 38.76
39.52
24.54
24.79
33.20
33.45
27.25
27.76
M2000/23-9 25 52.65
53.42
38.25
38.51
46.91
47.17
41.02
41.53
0.74
1.25
M2000/23-10 37 68.94
69.70
34.71
54.97
63.37
63.63
57.45
57.96
M2000/23-11 50 66.55
67.31
52.30
52.55
60.99
61.24
10.62
10.87
14.99
15.75
55.07
55.58
13.31
13.82
STANDARD DENSITY STRAIGHT PC TAIL
PIN 1
3.05+0.13
-
(2 HOLES)
‘D’
‘A’
‘C’
‘B’
0.76+0.02
-
4.70+0.20
-
5.34+0.20
-
(09 TO 37 PIN)
‘G’
‘F’
‘E’
‘L’
‘J’
‘K’
( 50 PIN)
‘H’
CONNECTOR WITH BRASS BUSH
BRASS BUSH
2 NOS.
6.00
3.20
INTERFACIAL
SEAL
0.76+0.02
-
PLUG CONNECTOR
WITH INTERFACIAL SEAL
CLINCH NUT
(4-40OUNC)
0.76+0.02
-
3.75+0.02
-
WITH CLINCH NUT (4 - 40OUNC THREAD)
CONNECTOR
M2000/ 23 7F CN
Series
Connector Type Dash Number Finish Special Option
23 - Receptacle Connector
(PC Tail Type)
7
8
9
10
11
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
IF - With Interfacial Seal
IFCN - With Interfacial Seal & Clinch Nut
FS - Female Screw-lock (Jackpost)
MS - Male Screw-lock
L - Launch Vehicle Option
Omit- Standard version
*Brass bush (spacer) will be supplied loose with this connector
(Not applicable for connector with clinch nut)
* Dimensions A-L: Top # min., Bottom # max.
*
Contact dsubs@amphenolpcd.com 93
STANDARD DENSITY STRAIGHT PC TAIL
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts A B C D E F G H J K L
M2000/24-13 09 30.43
31.19
16.79
17.04
24.87
25.12
8.23
8.48
12.17
12.93
10.46
10.97
5.82
6.05
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
M2000/24-14 15 38.76
39.52
25.12
25.37
33.20
33.45
27.25
27.76
M2000/24-15 25 52.65
53.42
38.84
39.09
46.91
47.17
10.57
11.07
41.02
41.53
1.27
1.78
0.74
1.25
M2000/24-16 37 68.94
69.70
55.30
55.55
63.37
63.63
57.45
57.96
M2000/24-17 50 66.55
67.31
52.65
52.93
60.99
61.24
11.07
11.33
14.99
15.75
55.07
55.58
13.31
13.82
PIN 1
‘C’
‘B’ 3.05+0.13
-
(2 HOLES)
‘A’
‘F’
‘G’
‘L’
5.34+0.20
-
(09 TO 37 PIN)
(50 PIN)
K
0.02
0.20
M2000/ 24 13 F CN
Series
Connector Type Dash Number Finish Special Option
24 - Plug Connector (PC Tail Type)
13
14
15
16
17
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
IF - With Interfacial Seal
IFCN - With Interfacial Seal & Clinch Nut
FS - Female Screw-lock (Jackpost)
MS - Male Screw-lock
L - Launch Vehicle Option
Omit- Standard version
Plug-Straight PC Tail
* Dimensions A-L: Top # min., Bottom # max.
Visit amphenolpcd.com for more information
94
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts A B C D E F G H J K L
M2000/23-13 09 30.43
31.19
16.21
16.46
24.87
25.12
7.77
8.03
12.17
12.93 10.64
11.15
6.05
6.30
19.02
19.53
10.46
10.97 0.89
1.52
0.51
1.02
M2000/23-14 15 38.76
39.52
24.54
24.79
33.20
33.45
27.25
27.76
M2000/23-15 25 52.65
53.42
38.25
38.51
46.91
47.17
41.02
41.53
0.74
1.25
M2000/23-16 37 68.94
69.70
34.71
54.97
63.37
63.63
57.45
57.96
M2000/23-17 50 66.55
67.31
52.30
52.55
60.99
61.24
10.62
10.87
14.99
15.75
55.07
55.58
13.31
13.82
Receptacle-Straight PC Tail
STANDARD DENSITY STRAIGHT PC TAIL
CONNECTOR WITH BRASS BUSH
BRASS BUSH
2 NOS.
6.00
3.20
INTERFACIAL
SEAL
1.0+0.02
-
PLUG CONNECTOR
WITH INTERFACIAL SEAL
WITH CLINCH NUT (4 - 40OUNC THREAD)
CONNECTOR
0.76+0.02
-
3.75+0.20
-
CLINCH NUT
(4-40UNC)
M2000/ 23 13 F CN
Series
Connector Type Dash Number Finish Special Option
23 - Receptacle Connector
(PC Tail Type)
13
14
15
16
17
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
IF - With Interfacial Seal
IFCN - With Interfacial Seal & Clinch Nut
FS - Female Screw-lock (Jackpost)
MS - Male Screw-lock
L - Launch Vehicle Option
Omit- Standard version
*Brass bush (spacer) will be supplied loose with this connector
(Not applicable for connector with clinch nut)
* Dimensions A-L: Top # min., Bottom # max.
*
Contact dsubs@amphenolpcd.com 95
STANDARD DENSITY STRAIGHT PC TAIL
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts A B C D E F G H J K L
M2000/24-19 09 30.43
31.19
16.79
17.04
24.87
25.12
8.23
8.48
12.17
12.93
10.46
10.97
5.82
6.05
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
M2000/24-20 15 38.76
39.52
25.12
25.37
33.20
33.45
27.25
27.76
M2000/24-21 25 52.65
53.42
38.84
39.09
46.91
47.17
10.57
11.07
41.02
41.53
1.27
1.78
0.74
1.25
M2000/24-22 37 68.94
69.70
55.30
55.55
63.37
63.63
57.45
57.96
M2000/24-23 50 66.55
67.31
52.65
52.93
60.99
61.24
11.07
11.33
14.99
15.75
55.07
55.58
13.31
13.82
3.05+0.13
-
(2 HOLES)
PIN 1 ‘C’
‘B’
‘D’
‘A’
1.0+0.02
-
‘F’
4.70+0.20
-
5.34+0.20
-
(09 TO 37 PIN)
‘G’
‘L’ ‘K’
(50 PIN)
‘H’
M2000/ 24 19 F CN
Series
Connector Type Dash Number Finish Special Option
24 - Plug Connector
(PC Tail Type)
19
20
21
22
23
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
IF - With Interfacial Seal
IFCN - With Interfacial Seal & Clinch Nut
FS - Female Screw-lock (Jackpost)
MS - Male Screw-lock
L - Launch Vehicle Option
Omit- Standard version
Plug-Straight PC Tail
* Dimensions A-L: Top # min., Bottom # max.
Visit amphenolpcd.com for more information
96
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts A B C D E F G H J K L
M2000/23-19 09 30.43
31.19
16.21
16.46
24.87
25.12
7.77
8.03
12.17
12.93 10.64
11.15
6.05
6.30
19.02
19.53
10.46
10.97 0.89
1.52
0.51
1.02
M2000/23-20 15 38.76
39.52
24.54
24.79
33.20
33.45
27.25
27.76
M2000/23-21 25 52.65
53.42
38.25
38.51
46.91
47.17
41.02
41.53
0.74
1.25
M2000/23-22 37 68.94
69.70
34.71
54.97
63.37
63.63
57.45
57.96
M2000/23-23 50 66.55
67.31
52.30
52.55
60.99
61.24
10.62
10.87
14.99
15.75
55.07
55.58
13.31
13.82
Receptacle-Straight PC Tail
STANDARD DENSITY STRAIGHT PC TAIL
M2000/ 23 19 F CN
Series
Connector Type Dash Number Finish Special Option
23 - Receptacle Connector
(PC Tail Type)
19
20
21
22
23
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
IF - With Interfacial Seal
IFCN - With Interfacial Seal & Clinch Nut
FS - Female Screw-lock (Jackpost)
MS - Male Screw-lock
L - Launch Vehicle Option
Omit- Standard version
*Brass bush (spacer) will be supplied loose with this connector
(Not applicable for connector with clinch nut)
* Dimensions A-L: Top # min., Bottom # max.
*
Contact dsubs@amphenolpcd.com 97
HIGH DENSITY STRAIGHT PC TAIL
Dimensions (mm)
Part Number
(Dash Number)
High Density
Contacts A B C D E F G H J K L
M2000/24-61 15 30.43
31.19
16.79
17.04
24.87
25.12
8.23
8.48
12.17
12.93
10.46
10.97
5.82
6.05
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
M2000/24-62 26 38.76
39.52
25.12
25.37
33.20
33.45
27.25
27.76
M2000/24-63 44 52.65
53.42
38.84
39.09
46.91
47.17
10.57
11.07
41.02
41.53
1.27
1.78
0.74
1.25
M2000/24-64 62 68.94
69.70
55.30
55.55
63.37
63.63
57.45
57.96
M2000/24-65 78 66.55
67.31
52.65
52.93
60.99
61.24
11.07
11.33
14.99
15.75
55.07
55.58
13.31
13.82
3.05+0.13
-
‘C’
‘B’
PIN 1
‘A’
‘D’
(2 HOLES)
5.34+0.20
-
(15 TO 62 PIN)
‘F’
‘G’
‘L’
‘E’
‘J’
0.51+0.02
-
4.00+0.20
-
K
(78 PIN)
M2000/ 24 61 F CN
Series
Connector Type Dash Number Finish Special Option
24 - Plug Connector (PC Tail Type)
61
62
63
64
65
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
IF - With Interfacial Seal
IFCN - With Interfacial Seal & Clinch Nut
FS - Female Screw-lock (Jackpost)
MS - Male Screw-lock
L - Launch Vehicle Option
Omit- Standard version
Plug-Straight PC Tail
* Dimensions A-L: Top # min., Bottom # max.
Visit amphenolpcd.com for more information
98
Dimensions (mm)
Part Number
(Dash Number)
High Density
Contacts A B C D E F G H J K L
M2000/23-61 15 30.43
31.19
16.21
16.46
24.87
25.12
7.77
8.03
12.17
12.93 10.64
11.15
6.05
6.30
19.02
19.53
10.46
10.97 0.89
1.52
0.51
1.02
M2000/23-62 26 38.76
39.52
24.54
24.79
33.20
33.45
27.25
27.76
M2000/23-63 44 52.65
53.42
38.25
38.51
46.91
47.17
41.02
41.53
0.74
1.25
M2000/23-64 62 68.94
69.70
34.71
54.97
63.37
63.63
57.45
57.96
M2000/23-65 78 66.55
67.31
52.30
52.55
60.99
61.24
10.62
10.87
14.99
15.75
55.07
55.58
13.31
13.82
Receptacle-Straight PC Tail
HIGH DENSITY STRAIGHT PC TAIL
3.05+0.13
-
(2 HOLES)
‘C’
‘B’
‘A’
PIN 1
‘D’
(78 PIN)
K
‘H’
0.51+0.02
-
‘F’
‘G’
‘L’
‘E’
‘J’
5.34+0.20
-
4.00+0.20
-
(15 TO 62 PIN)
3.20
6.00
BRASS BUSH
2 NOS.
CONNECTOR WITH BRASS BUSH
INTERFACIAL
SEAL
PLUG CONNECTOR
WITH INTERFACIAL SEAL
0.51+0.02
-
0.51+0.02
-
CLINCH NUT
(4-40OUNC)
3.75+0.02
-
WITH CLINCH NUT (4 - 40OUNC THREAD)
CONNECTOR
M2000/ 23 61 F CN
Series
Connector Type Dash Number Finish Special Option
23 - Receptacle Connector
(PC Tail Type)
61
62
63
64
65
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
IF - With Interfacial Seal
IFCN - With Interfacial Seal & Clinch Nut
FS - Female Screw-lock (Jackpost)
MS - Male Screw-lock
L - Launch Vehicle Option
Omit- Standard version
*Brass bush (spacer) will be supplied loose with this connector
(Not applicable for connector with clinch nut)
* Dimensions A-L: Top # min., Bottom # max.
*
Contact dsubs@amphenolpcd.com 99
HIGH DENSITY STRAIGHT PC TAIL
Dimensions (mm)
Part Number
(Dash Number)
High Density
Contacts A B C D E F G H J K L
M2000/24-67 15 30.43
31.19
16.79
17.04
24.87
25.12
8.23
8.48
12.17
12.93
10.46
10.97
5.82
6.05
19.02
19.53
10.46
10.97
0.89
1.52
0.51
1.02
M2000/24-68 26 38.76
39.52
25.12
25.37
33.20
33.45
27.25
27.76
M2000/24-69 44 52.65
53.42
38.84
39.09
46.91
47.17
10.57
11.07
41.02
41.53
1.27
1.78
0.74
1.25
M2000/24-70 62 68.94
69.70
55.30
55.55
63.37
63.63
57.45
57.96
M2000/24-71 78 66.55
67.31
52.65
52.93
60.99
61.24
11.07
11.33
14.99
15.75
55.07
55.58
13.31
13.82
3.05+0.13
-
(2 HOLES)
‘B’
‘C’
‘B’
‘A’
PIN 1
0.51+0.02
-
‘F’
‘G’
‘L’
‘E’
‘J’
7.56+0.20
-
5.34+0.20
-
(15 TO 62 PIN)
(78 PIN)
M2000/ 24 67 F CN
Series
Connector Type Dash Number Finish Special Option
24 - Plug Connector
(PC Tail Type)
67
68
69
70
71
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
IF - With Interfacial Seal
IFCN - With Interfacial Seal & Clinch Nut
FS - Female Screw-lock (Jackpost)
MS - Male Screw-lock
L - Launch Vehicle Option
Omit- Standard version
Plug-Straight PC Tail
* Dimensions A-L: Top # min., Bottom # max.
Visit amphenolpcd.com for more information
100
Dimensions (mm)
Part Number
(Dash Number)
High Density
Contacts A B C D E F G H J K L
M2000/23-67 15 30.43
31.19
16.21
16.46
24.87
25.12
7.77
8.03
12.17
12.93 10.64
11.15
6.05
6.30
19.02
19.53
10.46
10.97 0.89
1.52
0.51
1.02
M2000/23-68 26 38.76
39.52
24.54
24.79
33.20
33.45
27.25
27.76
M2000/23-69 44 52.65
53.42
38.25
38.51
46.91
47.17
41.02
41.53
0.74
1.25
M2000/23-70 62 68.94
69.70
34.71
54.97
63.37
63.63
57.45
57.96
M2000/23-71 78 66.55
67.31
52.30
52.55
60.99
61.24
10.62
10.87
14.99
15.75
55.07
55.58
13.31
13.82
Receptacle-Straight PC Tail
HIGH DENSITY STRAIGHT PC TAIL
3.05+0.13
(2 holes)
-
‘C’
‘B’
‘A’
PIN 1
‘D’
‘E’
‘F’
‘G’
‘L’
‘J’
0.51+0.02
-
5.34+0.20
-
7.56+0.20
-(78 PIN)
‘K’
‘H’
6.00
CONNECTOR WITH BRASS BUSH
3.20
BRASS BUSH
2 NOS.
INTERFACIAL
SEAL
0.51+0.02
-
PLUG CONNECTOR
WITH INTERFACIAL SEAL
CLINCH NUT
(4-40OUNC)
0.51+0.02
-
3.75+0.02
-
WITH CLINCH NUT (4 - 40OUNC THREAD)
CONNECTOR
M2000/ 23 67 F CN
Series
Connector Type Dash Number Finish Special Option
23 - Receptacle Connector
(PC Tail Type)
67
68
69
70
71
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
IF - With Interfacial Seal
IFCN - With Interfacial Seal & Clinch Nut
FS - Female Screw-lock (Jackpost)
MS - Male Screw-lock
L - Launch Vehicle Option
Omit- Standard version
*Brass bush (spacer) will be supplied loose with this connector
(Not applicable for connector with clinch nut)
* Dimensions A-L: Top # min., Bottom # max.
*
Contact dsubs@amphenolpcd.com 101
STANDARD D-SUB RIGHT ANGLE PC TAIL
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts
A B C D E G H J
K
M N P S X
±
0.13
±
0.13
±
0.13
±
0.38
±
0.25
±
0.25
±
0.25
±
0.15
±
0.25
±
0.25
±
0.10
±
0.25
±
0.20
M2000/24-31 9 30.81 16.92 24.99
8.36 12.55 10.03 7.19
7.19
6.04
5.82 0.76 10.72
2.84
19.28
3.96
M2000/24-32 15 39.14 25.25 33.33 27.51
M2000/24-33 25 53.04 38.96 47.04
5.99
5.68 0.99 10.82
29.59
M2000/24-34 37 69.32 55.42 63.50 57.71
M2000/24-35 50 66.93 52.81 61.11 11.20 15.37 12.88 15.09 55.32
Plug-Right Angle PC Tail w/ Pin Contact
M2000/ 24 31 F L
Series
Connector Type Dash Number Finish Special Option
24 - Right Angle Plug
Connector (PC Tail Type)
31
32
33
34
35
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
L- Launch vehicle application
Omit- Standard version
S
STD-THROUGH HOLE.
ø 3.05±0.13
1.24 MAX.
1.78 MAX.
(50 PIN)
10.03
J
G
E
B
C
D
A
ø 0.76±0.02
G
(09 TO 37 PIN)
N
K
P
X
M
J
H
Visit amphenolpcd.com for more information
102
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts
A B C D E G H J
K
M N P S X
±
0.13
±
0.13
±
0.13
±
0.38
±
0.25
±
0.25
±
0.25
±
0.15
±
0.25
±
0.25
±
0.10
±
0.25
±
0.20
M2000/23-31 9 30.81 16.33 24.99
7.90 12.55 10.03 12.29
7.19 6.30
6.04
0.76
10.90 2.84
19.28
3.96
M2000/23-32 15 39.14 24.66 33.33 27.51
M2000/23-33 25 53.04 38.38 47.04
0.99
29.59
M2000/23-34 37 69.32 54.84 63.50 57.71
M2000/23-35 50 66.93 52.81 61.11 10.74 15.37 12.88 15.09 55.32
Receptacle-Right Angle PC Tail w/ Socket Contact
STANDARD D-SUB RIGHT ANGLE PC TAIL
S
STD-THROUGH HOLE.
ø 3.05±0.13
1.24 MAX.
1.78 MAX.
E
B
C
D
A
ø 0.76±0.02
(50 PIN)
10.03
J
G
G
X
(09 TO 37 PIN)
N
K
P
M
J
H
M2000/ 24 31 F L
Series
Connector Type Dash Number Finish Special Option
23 - Right Angle Receptacle Connec-
tor (PC Tail Type)
31
32
33
34
35
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
L- Launch vehicle application
Omit- Standard version
102 Visit amphenolpcd.com for more information
Contact dsubs@amphenolpcd.com 103
STANDARD D-SUB RIGHT ANGLE PC TAIL
W/ EXTRA PC TAIL LENGTH
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts
A B C D E G H J
K
M N P S X
±
0.13
±
0.13
±
0.13
±
0.38
±
0.25
±
0.25
±
0.25
±
0.15
±
0.25
±
0.25
±
0.10
±
0.25
±
0.20
M2000/24-49 9 30.81 16.92 24.99
8.36 12.55 10.03 12.29
7.19
6.04/
5.82 0.76 10.72
2.84
19.28
4.78
M2000/24-50 15 39.14 25.25 33.33 27.51
M2000/24-51 25 53.04 38.96 47.04
5.99/
5.68 0.99 10.82
29.59
M2000/24-52 37 69.32 55.42 63.50 57.71
M2000/24-53 50 66.93 52.81 61.11 11.20 15.37 12.88 15.09 55.32
Plug-Right Angle PC Tail w/ Pin Contact
M2000/ 24 49 F L
Series
Connector Type Dash Number Finish Special Option
24 - Right Angle Plug
Connector (PC Tail Type)
49
50
51
52
53
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
L- Launch vehicle application
Omit- Standard version
(50 PIN)
10.03
J
G
G
(09 TO 37 PIN)
N
K
P
X1
M
J
H
S
STD-THROUGH HOLE.
ø 3.05±0.13
1.24 MAX.
1.78 MAX.
E
B
C
D
A
ø 0.76±0.02
Visit amphenolpcd.com for more information
104
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts
A B C D E G H J
K
M N P S X
±
0.13
±
0.13
±
0.13
±
0.38
±
0.25
±
0.25
±
0.25
±
0.15
±
0.25
±
0.25
±
0.10
±
0.25
±
0.20
M2000/23-49 9 30.81 16.33 24.99
7.90 12.55 10.03 12.29
7.19 6.30
6.04
0.76
10.90 2.84
19.28
4.78
M2000/23-50 15 39.14 24.66 33.33 27.51
M2000/23-51 25 53.04 38.38 47.04
0.99
29.59
M2000/23-52 37 69.32 54.84 63.50 57.71
M2000/23-53 50 66.93 52.43 61.11 10.74 15.37 12.88 15.09 55.32
Receptacle-Right Angle PC Tail w/ Socket Contact
STANDARD D-SUB RIGHT ANGLE PC TAIL
W/ EXTRA PC TAIL LENGTH
S
STD-THROUGH HOLE
ø 3.05±0.13
1.24 MAX.
1.78 MAX.
E
B
C
D
A
ø 0.76±0.02
10.03
J
G
G
N
K
P
M
J
X1
H
M2000/ 23 49 F L
Series
Connector Type Dash Number Finish Special Option
23 - Right Angle Receptacle
Connector (PC Tail Type)
49
50
51
52
53
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
L- Launch vehicle application
Omit- Standard version
Contact dsubs@amphenolpcd.com 105105
HIGH DENSITY RIGHT ANGLE PC TAIL
Dimensions (mm)
Part Number
(Dash Number)
High Density
Contacts
A B C D E H J
K
S X
± 0.13 ± 0.13 ± 0.13 ± 0.38 ± 0.25 ± 0.25 ± 0.15 ± 0.25 ± 0.20
M2000/24-73 15 30.81 16.92 24.99
8.36 12.55
10.72 0.76 6.04
5.82
19.28
3.96
M2000/24-74 26 39.14 25.25 33.33 27.51
M2000/24-75 44 53.04 38.96 47.04
10.82 0.99 5.99
5.68
29.59
M2000/24-76 62 69.32 55.42 63.50 57.71
M2000/ 24 73 F CN
Series
Connector Type Dash Number Finish Special Option
24 - Plug Connector
(PC Tail Type)
73
74
75
76
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
FS - Female Screw-lock (Jackpost)
L- Launch vehicle application
Omit- Standard version
PIN 1 B
E
D
C
A
CONN. NO. & BATCH CODE
MARKED ON FRONT SHELL
AH
L-BRACKET
J
K
5.53
MAX.
11.43
17.50
0.51+0.02
-
3.05+0.05
-
1.98
(2 PL’S)
S
Plug-Right Angle PC Tail w/ Pin Contact
Contact dsubs@amphenolpcd.com
Visit amphenolpcd.com for more information
106
Dimensions (mm)
Part Number
(Dash Number)
High Density
Contacts
A B C D E H J
K
S X
± 0.13 ± 0.13 ± 0.13 ± 0.38 ± 0.25 ± 0.25 ± 0.15 ± 0.25 ± 0.20
M2000/23-73 15 30.81 16.33 24.99
7.90 12.55
10.90 0.76
6.04/
6.30
19.28
3.96
M2000/23-74 26 39.14 24.66 33.33 27.51
M2000/23-75 44 53.04 38.38 47.04
10.82 0.99
29.59
M2000/23-76 62 69.32 54.84 63.50 57.71
HIGH DENSITY RIGHT ANGLE PC TAIL
PIN 1
B
D
E
C
A
A CONN. NO. & BATCH CODE
MARKED ON FRONT SHELL H
J
K
11.43
5.53
MAX.
17.50
3.05+0.05
-
0.51+0.02
-
M2000/ 23 73 F CN
Series
Connector Type Dash Number Finish Special Option
23 - Receptacle Connector
(PC Tail Type)
73
74
75
76
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
FS - Female Screw-lock (Jackpost)
L- Launch vehicle application
Omit- Standard version
Receptacle-Right Angle PC Tail w/ Socket Contact
Contact dsubs@amphenolpcd.com 107
HIGH DENSITY RIGHT ANGLE PC TAIL
Plug-Right Angle PC Tail
Dimensions (mm)
Part Number
(Dash Number)
High Density
Contacts A B C D E F G H J L X
M2000/24-77 78
Min. 67.31 52.55 61.24 10.87 15.57 11.15 6.30 55.58 13.82 1.24
3.96
Max 66.51 52.30 60.99 10.62 14.99 10.64 6.05 55.07 13.31 0.74
M2000/ 24 77 F CN
Series
Connector Type Dash Number Finish Special Option
24 - Plug Connector
(PC Tail Type) 77
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
FS - Female Screw-lock (Jackpost)
L- Launch vehicle application
Omit- Standard version
Visit amphenolpcd.com for more information
108
Receptacle-Right Angle PC Tail
Dimensions (mm)
Part Number
(Dash Number)
High Density
Contacts A B C D E F G H J L X
M2000/23-77 78
Min. 67.31 52.55 61.24 10.87 15.57 11.15 6.30 55.58 13.82 1.24
3.96
Max 66.51 52.30 60.99 10.62 14.99 10.64 6.05 55.07 13.31 0.74
HIGH DENSITY RIGHT ANGLE PC TAIL
M2000/ 23 77 F CN
Series
Connector Type Dash Number Finish Special Option
23 - Receptacle Connector
(PC Tail Type) 77
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
CN - With Clinch Nut (4-40Unc)
FS - Female Screw-lock (Jackpost)
L- Launch vehicle application
Omit- Standard version
Contact dsubs@amphenolpcd.com 109
SAVER TYPE CONNECTOR
Dimensions (mm)
Part Number
(Dash Number)
High Density
Contact
A B A1 B1 C D F
± 0.13 ± 0.13 ± 0.13 ± 0.13 ± 0.13 ± 0.38 ± 0.38
M2000/CS-9 15 16.92
8.36
16.33
7.90
24.99 30.81
12.55
M2000/CS-15 26 25.25 24.66 33.32 39.14
M2000/CS-25 44 38.96 38.38 47.04 53.04
M2000/CS-37 62 55.42 54.84 63.50 69.32
M2000/CS-37 78 52.81 11.20 52.43 10.74 61.11 66.93 15.37
Standard Density Saver
M2000/ CS 15 F PS
Series Saver
Connector
Number of Pins Finish Option
Standard- 9,15, 25, 37,50
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
PS-Plug to Receptacle
Visit amphenolpcd.com for more information
110
Dimensions (mm)
Part Number
(Dash Number)
High Density
Contact
A B A1 B1 C D F
± 0.13 ± 0.13 ± 0.13 ± 0.13 ± 0.13 ± 0.38 ± 0.38
M2000/CSHD-15 15 16.92
8.36
16.33
7.90
24.99 30.81
12.55
M2000/CSHD-26 26 25.25 24.66 33.32 39.14
M2000/CSHD-44 44 38.96 38.38 47.04 53.04
M2000/CSHD-62 62 55.42 54.84 63.50 69.32
M2000/CSHD-78 78 52.81 11.20 52.43 10.74 61.11 66.93 15.37
High Density Saver
SAVER TYPE CONNECTOR
M2000/ CS HD 15 F PS
Series Saver
Connector
Density Number of Pins Finish Option
HD- High Density High Density- 15, 26, 44, 62, 78
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
K - Zinc Nickel Finish
T - Nickel Ptfe Finish
TI - Tin Plated
N - Nickel Plated
PS-Plug to Receptacle
Contact dsubs@amphenolpcd.com 111
STRAIN RELIEF BACKSHELL
Technical Data
Technical Data
Materials
Shell & Clamp: Mild Steel
Hardware : Stainless Steel
Finish
Shell & Clamp:
F - Cadmium Yellow Passivation
N- Electroless Nickel Finish
F - Cadmium Yellow Passivation
Hardware: N - SS Passivation
Recommended Torque: 4 Inch lb. max
Dimensions (mm)
Part Number
Cadmium Yellow
Passivation
Part Number
Electroless Nickel
Standard Density
Contacts
High Density
Contacts
A B D E
inch mm inch mm inch mm inch mm
M85049/48-2-1F M85049/48-2-1N 9 15 1.223
1.193
31.06
30.30
.515
.485
13.08
12.32 0.406 10.31 .676
.646
17.17
16.41
M85049/48-2-2F M85049/48-2-2N 15 26 1.546
1.516
39.26
38.51
.515
.485
13.08
12.32 0.406 10.31 .999
.969
25.37
24.61
M85049/48-2-3F M85049/48-2-3N 25 44 2.093
2.063
53.16
52.40
.515
.485
13.08
12.32 0.593 15.06 1.530
1.500
38.86
38.10
M85049/48-2-4F M85049/48-2-4N 37 62 2.733
2.703
69.42
68.66
515
.485
13.08
12.32 0.718 18.24 2.186
2.156
55.52
54.76
M85049/48-2-5F M85049/48-2-5N 50 78 2.640
2.610
67.06
66.29
.624
.594
15.85
15.09 0.812 20.62 2.108
2.078
53.54
52.78
Dimensions (mm)
Part Number
Cadmium Yellow
Passivation
Part Number
Electroless Nickel
Standard Density
Contacts
High Density
Contacts
F G H L
(+/-.031; +/-0.78)
inch mm inch mm inch mm inch mm
M85049/48-2-1F M85049/48-2-1N 9 15 .140
.110
3.56
2.79
1.061
1.001
26.95
25.43
.359
.329
9.12
8.36 0.375 9.53
M85049/48-2-2F M85049/48-2-2N 15 26 .140
.110
3.56
2.79
1.061
1.001
26.95
25.43
.359
.329
9.12
8.36 0.375 9.53
M85049/48-2-3F M85049/48-2-3N 25 44 .202
.172
5.13
4.37
1.092
1.032
27.74
26.21
.359
.329
9.12
8.36 0.375 9.53
M85049/48-2-4F M85049/48-2-4N 37 62 .265
.235
6.73
5.97
1.092
1.032
27.74
26.21
27.74
26.21
9.12
8.36 0.500 12.70
M85049/48-2-5F M85049/48-2-5N 50 78 327
.297
8.31
7.54
1.092
1.032
27.74
26.21
27.74
26.21
11.51
10.74 0.625 15.88
* Dimensions A-L: Top # min., Bottom # max.
Visit amphenolpcd.com for more information
112
FEMALE SCREW LOCK ASSEMBLY
Dimensions (mm)
Part Number
(Dash Number) A
M2000/26-1 7.92
M2000/26-2 15.88
M2000/ 26 1 F
Series Male Screw Lock Dash Number
Finish
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
TI - Tin Plated
None- Nickel
* All dimensions in mm
* When the connector using the alternate method of securing the shell is front mounted, one
at washer shall be used as a spacer between the mounted surface and the connector
Corrosive Atmosphere: 48 hours, 5% Salt Solution At 35º ± 2ºC and 95% To 98% Relative Humidity
Material & Finish: Cold Rolled Steel With Cadmium Yellow Passivation
Contact dsubs@amphenolpcd.com 113
MALE SCREW LOCK ASSEMBLY
Dimensions (mm)
Part Number
(Dash Number) Contacts A B
M2000/25-9 9 14.10 7.14
M2000/25-10 10 16.66 7.14
M2000/ 25 10 F
Series Male Screw Lock
Dash Number Finish
9: 1-4
10: 5
F - Cadmium Yellow Passivated
Z - Zinc Yellow Passivated
TI - Tin Plated
None- Nickel
* All dimensions in mm
* Screw shall be captivate in the clip after assembly by the end user and corrosion resistant steel screw
shall be used with corrosion resistant steel clip & cold rolled screws shall be used with sheet steel clip
Visit amphenolpcd.com for more information
114
DUST COVER
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts
High Density
Contacts
A B D E F
± 0.30 ± 0.30 ± 0.20 ± 0.20 ± 0.20
M2000-109125 9 15 18.50
11.80
16.20
5.00
7.65
M2000-109126 15 26 27.00 24.60
M2000-109127 25 44 40.90 38.30
M2000-109128 37 62 57.30 54.70
M2000-109129 50 78 55.20 14.50 52.40 10.50
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts
High Density
Contacts
A B D E F
± 0.30 ± 0.30 ± 0.20 ± 0.20 ± 0.20
M2000-109118 9 15 20.30
13.00
17.70
4.50
8.98
M2000-109119 15 26 28.10 26.00
M2000-109120 25 44 42.00 40.00
M2000-109121 37 62 59.00 56.70
M2000-109122 50 78 56.00 14.50 54.00 12.10
Plastic Dust Cap For Receptacle Connector
Plastic Dust Cap For Plug Connector
Contact dsubs@amphenolpcd.com 115
GASKET FOR D-SUB CONNECTORS
Dimensions (mm)
Part Number
(Dash Number)
Standard Density
Contacts
High Density
Contacts
A B C D E
± 0.13 ± 0.13 ± 0.13 ± 0.13 ± 0.13
M2000/1-SG 9 15 30.70 19.00 24.99
10.00 12.40
M2000/2-SG 15 26 39.00 27.00 33.32
M2000/3-SG 25 44 52.90 41.00 47.04
M2000/4-SG 37 62 69.20 57.00 63.50
M2000/ 1 SG A
Series Shell Size Sealing Gasket
Shielding Range
A:80db
B: 70db
Technical: Data
Material: : Zluorosilicone
Temperature: - 55°C To 160ºC
Hardness
For A Type: 65±10
For B Type: 75±7
*For Availability Of This Product Please Contact Factory
Visit amphenolpcd.com for more information
116
NOTES
Contact dsubs@amphenolpcd.com 117
Notice: Specications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Ofce
for the latest specications. All statements, information and data given herein are believed to be accurate and reli-
able, but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or
suggestions concerning possible use of our products are made without representation or warranty that any such use is
free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all
safety measures are indicated or that other measures may not be required. Specications are typical and may not apply
to all connectors.
© 2018 Amphenol Pcd
www.amphenolpcd.com
Amphenol Pcd