Aluminum electrolytic capacitors Axial-lead and soldering star capacitors Series/Type: B43693, B43793 Date: November 2012 (c) EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Axial-lead and soldering star capacitors B43693, B43793 High voltage 125 C Applications Automotive electronics Features High voltage design High ripple current capability Long useful life High vibration stability RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case with insulating sleeve Negative pole connected to case Terminals Axial leads, welded to ensure perfect electrical contact Soldering star for upright mounting on PCB available Alternative axial-lead design with double-sided plates for horizontal mounting available upon request Taping and packing Axial-lead capacitors will be delivered in pallet package Capacitors with d x l 16 x 30 mm are also available taped on reel Soldering star capacitors are packed in cardboard Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 15 B43693, B43793 High voltage 125 C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance 160 ... 250 V DC 1.15 VR 22 ... 130 F 10/+30% Q Leakage current Ileak (5 min, 20 C) Self-inductance ESL1) Diameter d (mm) 14 21 Length l (mm) Approx. ESL (nH) axial 30 24 34 39 38 45 49 50 30 7 10 39 11 13 14 soldering star 49 Useful life2) 125 C; VR; IAC,R 105 C; VR; IAC,R 85 C; VR; IAC,max 40 C; VR; 2 IAC,R 18 Terminals Requirements: C/C 30% of initial value ESR 3 times initial specified limit3) Ileak initial specified limit > 2500 h > 10000 h > 4000 h > 250000 h Voltage endurance test 105 C; VR 5000 h Post test requirements: C/C 10% of initial value ESR 1.3% of initial specified limit3) Ileak initial specified limit Vibration resistance test To IEC 60068-2-6, test Fc: Frequency range 10 Hz ... 2 kHz, displacement amplitude max. 1.5 mm, acceleration max. 20 g, duration 3 x 2 h. Capacitor mounted by its wire leads at a distance of (6 1) mm from the case and additionally clamped by the case. IEC climatic category To IEC 60068-1: 40/125/56 (40 C/+125 C/56 days damp heat test) Detail specification Sectional specification Similar to CECC 30301-802 IEC 60384-4 1) If optimum circuit design is used, the values are lower by 30%. 2) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. 3) ESRmax at 100 Hz, 20 C Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 15 B43693, B43793 High voltage 125 C B43693, Axial-lead capacitors Dimensional drawing Dimensions, weights and packing units dxl mm 14 x 30 18 x 30 18 x 39 21 x 39 21 x 49 dmax x Imax mm 14.5 x 30.5 18.5 x 30.5 18.5 x 40 21.5 x 40 21.5 x 50 Please read Cautions and warnings and Important notes at the end of this document. Approx. weight g 6.8 11.1 14.7 20.0 25.0 Page 4 of 15 Packing units (pcs.) Pallet Reel 200 350 160 160 140 110 B43693, B43793 High voltage 125 C B43793, Soldering star capacitors Dimensional drawings Mounting holes d = 14 mm Mounting holes d = 16 mm ... 21 mm Dimensions, weights and packing units dxl mm 14 x 30 18 x 30 18 x 39 21 x 39 21 x 49 dmax x Imax mm 15.5 x 32 19.5 x 32 19.5 x 41.5 22.5 x 41.5 22.5 x 51.5 Please read Cautions and warnings and Important notes at the end of this document. c 0.1 mm 14.5 18.5 18.5 21.5 21.5 e 0.1 mm 3.0 3.0 3.0 3.5 3.5 Page 5 of 15 Approx. weight g 7.2 11.8 15.4 21.0 26.0 Packing units pcs. 480 300 200 324 264 B43693, B43793 High voltage 125 C Case dimensions and ordering codes VR V DC 160 200 250 CR 100 Hz 20 C F 68 130 200 300 400 47 100 150 200 270 22 47 68 100 130 Case dimensions dxl mm 14 x 30 18 x 30 18 x 39 21 x 39 21 x 49 14 x 30 18 x 30 18 x 39 21 x 39 21 x 49 14 x 30 18 x 30 18 x 39 21 x 39 21 x 49 Please read Cautions and warnings and Important notes at the end of this document. Ordering code Axial pallet Ordering code Axial reel Ordering code Soldering star B43693A1686Q001 B43693A1686Q003 B43793A1686Q001 B43693A1137Q001 B43793A1137Q001 B43693A1207Q001 B43793A1207Q001 B43693A1307Q001 B43793A1307Q001 B43693A1407Q001 B43793A1407Q001 B43693B2476Q001 B43693B2476Q003 B43793B2476Q001 B43693B2107Q001 B43793B2107Q001 B43693A2157Q001 B43793A2157Q001 B43693A2207Q001 B43793A2207Q001 B43693A2307Q001 B43793A2307Q001 B43693A2226Q001 B43693A2226Q003 B43793A2226Q001 B43693A2476Q001 B43793A2476Q001 B43693A2686Q001 B43793A2686Q001 B43693A2107Q001 B43793A2107Q001 B43693A2137Q001 B43793A2137Q001 Page 6 of 15 B43693, B43793 High voltage 125 C Technical data CR 100 Hz 20 C F Case dimensions dxl mm VR = 160 V DC 68 14 x 30 130 18 x 30 200 18 x 39 300 21 x 39 400 21 x 49 VR = 200 V DC 47 14 x 30 100 18 x 30 150 18 x 39 200 21 x 39 270 21 x 49 VR = 250 V DC 22 14 x 30 47 18 x 30 68 18 x 39 100 21 x 39 130 21 x 49 ESRmax 100 Hz 20 C m ESRmax 100 Hz 40 C ESRmax 10 kHz 20 C m Zmax 100 kHz 20 C m IAC,max 10 kHz 40 C A IAC,max 10 kHz 105 C A IAC,R 10 kHz 105 C A IAC,max 10 kHz 125 C A 1050 570 370 250 190 25 13 8 6 4 440 240 160 105 77 450 250 165 110 80 3.68 5.2 7.2 10.05 12.9 2.95 4.15 5.75 8.10 10.40 1.2 1.7 2.35 3.3 4.25 2.3 3.25 4.5 6.25 8.0 1400 680 450 330 250 32 15 10 7.5 5.5 500 240 160 120 90 510 250 165 123 93 3.4 5.05 6.95 9.3 12.0 2.72 4.00 5.60 7.45 9.60 1.12 1.65 2.30 3.05 3.95 2.13 3.15 4.33 5.8 7.5 2300 1100 750 520 400 34.0 16.0 11.0 7.5 6.0 454 222 154 102 79 510 246 171 114 88 3.65 5.43 7.36 10.16 12.89 2.90 4.35 5.90 8.15 10.35 1.20 1.78 2.41 3.33 4.23 2.27 3.38 4.58 6.33 8.03 Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 15 B43693, B43793 High voltage 125 C Useful life1) depending on ambient temperature TA under ripple current operating conditions at VR Useful life1) depending on case temperature TC under ripple current operating conditions at VR1) 1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life. Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 15 B43693, B43793 High voltage 125 C Frequency factor of permissible ripple current IAC versus frequency f Equivalent series resistance ESR versus frequency f Typical behavior for 47 F/250 V Frequency characteristics of ESR Typical behavior for 160 and 200 V Frequency characteristics of ESR Typical behavior for 250 V Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 15 B43693, B43793 High voltage 125 C Cautions and warnings Personal safety The electrolytes used by EPCOS have been optimized both with a view to the intended application and with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no alternative materials are currently known. However, the amount of dangerous materials used in our products is limited to an absolute minimum. Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV. MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data book. MDS for customer specific capacitors are available upon request. MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected areas immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 15 B43693, B43793 High voltage 125 C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Safety information Polarity Make sure that polar capacitors are connected with the right polarity. Reverse voltage Voltages polarity classes should be prevented by connecting a diode. Do not mount the capacitor with the terminals (safety vent) upside down. Mounting position of screwterminal capacitors Robustness of terminals Mounting of single-ended capacitors Soldering Soldering, cleaning agents Upper category temperature Passive flammability The following maximum tightening torques must not be exceeded when connecting screw terminals: M5: 2.5 Nm M6: 4.0 Nm The internal structure of single-ended capacitors might be damaged if excessive force is applied to the lead wires. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. Do not exceed the specified time or temperature limits during soldering. Do not allow halogenated hydrocarbons to come into contact with aluminum electrolytic capacitors. Do not exceed the upper category temperature. Avoid external energy, such as fire or electricity. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 15 Reference chapter "General technical information" 1 "Basic construction of aluminum electrolytic capacitors" 3.1.6 "Reverse voltage" 11.1. "Mounting positions of capacitors with screw terminals" 11.3 "Mounting torques" 11.4 "Mounting considerations for single-ended capacitors" 11.5 "Soldering" 11.6 "Cleaning agents" 7.2 "Maximum permissible operating temperature" 8.1 "Passive flammability" B43693, B43793 High voltage 125 C Topic Safety information Active flammability Maintenance Avoid overload of the capacitors. Storage Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the electricity of the capacitors. Do not apply any mechanical stress to the capacitor terminals. Do not store capacitors at high temperatures or high humidity. Capacitors should be stored at +5 to +35 C and a relative humidity of 75%. Breakdown strength Do not damage the insulating sleeve, especially of insulating when ring clips are used for mounting. sleeves Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 15 Reference chapter "General technical information" 8.2 "Active flammability" 10 "Maintenance" 7.3 Storage conditions Reference chapter "Capacitors with screw terminals" "Screw terminals accessories" B43693, B43793 High voltage 125 C Symbols and terms Symbol English German C CR CS CS,T Cf d dmax ESL ESR ESRf Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current (ripple current) Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Rated ripple current for base cooling Leakage current Operating leakage current Case length, nominal dimension Maximum case length (without terminals and mounting stud) Resistance Insulation resistance Balancing resistance Temperature Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life (operating hours) Kapazitat Nennkapazitat Serienkapazitat Serienkapazitat bei Temperatur T Kapazitat bei Frequenz f Gehausedurchmesser, Nennma Maximaler Gehausedurchmesser Eigeninduktivitat Ersatzserienwiderstand Ersatzserienwiderstand bei Frequenz f ESRT f I IAC IAC,rms IAC,f IAC,max IAC,R IAC,R (B) Ileak Ileak,op l lmax R Rins Rsymm T T TA TC TB t t tb Please read Cautions and warnings and Important notes at the end of this document. Ersatzserienwiderstand bei Temperatur T Frequenz Strom Wechselstrom Wechselstrom, Effektivwert Wechselstrom bei Frequenz f Maximal zulassiger Wechselstrom Nennwechselstrom Nennwechselstromstrom fur Bodenkuhlung Reststrom Betriebsreststrom Gehauselange, Nennma Maximale Gehauselange (ohne Anschlusse und Gewindebolzen) Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehausetemperatur Temperatur des Becherbodens Zeit Zeitraum Brauchbarkeitsdauer (Betriebszeit) Page 13 of 15 B43693, B43793 High voltage 125 C Symbol V VF Vop VR VS XC XL Z ZT tan 0 r English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity; 2 f German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitatszahl Kreisfrequenz; 2 f Note All dimensions are given in mm. Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 15 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 15 of 15 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: EPCOS / TDK: B43693A2226Q007 B43693A2476Q007 B43693A2686Q007 B43693A2107Q007 B43693A2137Q007 B43693A2226Q009 B43693A1107Q007 B43693A1336Q007 B43693A1336Q009 B43693A1476Q007 B43693A1476Q009