DATA SH EET
Product specification
Supersedes data of 1996 Jun 10 2003 May 13
DISCRETE SEMICONDUCTORS
PRLL4001; PRLL4002
Rectifiers
b
ook, halfpage
M3D121
2003 May 13 2
Philips Semiconductors Product specification
Rectifiers PRLL4001; PRLL4002
FEATURES
•Glass passivated
•High maximum operating
temperature
•Low leakage current
•Excellent stability
•Shipped in 8 mm embossed tape
•Smallest surface mount rectifier
outline.
DESCRIPTION
Cavity free cylindrical glass package
through Implotec(1) technology.
(1) Implotec is a trademark of Philips.
This package is hermetically sealed
and fatigue free as coefficients of
expansion of all used parts are
matched.
Fig.1 Simplified outline (SOD87) and symbol.
handbook, 4 columns
MAM061
ka
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134).
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VRRM repetitive peak reverse voltage
PRLL4001 −50 V
PRLL4002 −100 V
VRcontinuous reverse voltage
PRLL4001 −50 V
PRLL4002 −100 V
IF(AV) average forward current averaged over any 20 ms period;
Ttp = 105 °C−1.60 A
averaged over any 20 ms period;
Tamb =65°C; see Fig.2 −0.68 A
IFRM repetitive peak forward current −10 A
IFSM non-repetitive peak forward current half sinewave; 60 Hz −20 A
Tstg storage temperature −65 +175 °C
Tjjunction temperature −65 +175 °C
2003 May 13 3
Philips Semiconductors Product specification
Rectifiers PRLL4001; PRLL4002
ELECTRICAL CHARACTERISTICS
Tj=25°C unless otherwise specified.
THERMAL CHARACTERISTICS
Note
1. Device mounted on epoxy-glass printed-circuit board, 1.5 mm thick; thickness of copper ≥40 µm, see Fig.4.
For more information please refer to the
“General Part of associated Handbook”
.
SYMBOL PARAMETER CONDITIONS MAX. UNIT
VFforward voltage IF= 1 A; see Fig.3 1.1 V
VF(AV) full-cycle average forward voltage IF(AV) = 1 A 0.8 V
IRreverse current VR=V
Rmax 10 µA
VR=V
Rmax; Tamb = 100 °C50µA
I
R(AV) full-cycle average reverse current VR=V
RRMmax; Tamb =75°C30µA
SYMBOL PARAMETER CONDITIONS VALUE UNIT
Rth j-tp thermal resistance from junction to tie-point 30 K/W
Rth j-a thermal resistance from junction to ambient note 1 150 K/W
2003 May 13 4
Philips Semiconductors Product specification
Rectifiers PRLL4001; PRLL4002
GRAPHICAL DATA
handbook, halfpage
0 200
0
MBH384
0.5
1.0
100 Tamb (°C)
IF(AV)
(A)
Fig.2 Maximum average forward current as a
function of ambient temperature. Fig.3 Forward current as a function of forward
voltage; typical values.
handbook, halfpage
1.50 0.5
IF
(A)
10−1
1
10
MBH385
1VF (V)
(2)(1) (3)
(1) Tamb = 100 °C.
(2) Tamb = 20°C.
(3) Tamb =−50 °C.
Fig.4 Printed-circuit board for surface mounting.
Dimensions in mm.
MSB213
4.5
2.5
1.25
50
50
2003 May 13 5
Philips Semiconductors Product specification
Rectifiers PRLL4001; PRLL4002
PACKAGE OUTLINE
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC EIAJ
SOD87 100H03 99-03-31
99-06-04
Hermetically sealed glass surface mounted package;
ImplotecTM(1) technology; 2 connectors SOD87
UNIT D
mm 2.1
2.0 2.0
1.8 3.7
3.3 0.3
D1 HL
DIMENSIONS (mm are the original dimensions) H
DD1
LL
(2)
0 1 2 mm
scale
Notes
1. Implotec is a trademark of Philips.
2. The marking indicates the cathode.
ka
2003 May 13 6
Philips Semiconductors Product specification
Rectifiers PRLL4001; PRLL4002
DATA SHEET STATUS
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
LEVEL DATA SHEET
STATUS(1) PRODUCT
STATUS(2)(3) DEFINITION
I Objective data Development This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
II Preliminary data Qualification This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
III Product data Production This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Relevant changes will
be communicated via a Customer Product/Process Change Notification
(CPCN).
DEFINITIONS
Short-form specification The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
attheseoratanyotherconditionsabovethosegiveninthe
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Application information Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
norepresentationorwarrantythatsuch applicationswillbe
suitable for the specified use without further testing or
modification.
DISCLAIMERS
Life support applications These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductorscustomersusingorselling theseproducts
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes Philips Semiconductors
reserves the right to make changes in the products -
including circuits, standard cells, and/or software -
described or contained herein in order to improve design
and/or performance. When the product is in full production
(status ‘Production’), relevant changes will be
communicated via a Customer Product/Process Change
Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these
products, conveys no licence or title under any patent,
copyright, or mask work right to these products, and
makes no representations or warranties that these
products are free from patent, copyright, or mask work
right infringement, unless otherwise specified.
2003 May 13 7
Philips Semiconductors Product specification
Rectifiers PRLL4001; PRLL4002
NOTES
© Koninklijke Philips Electronics N.V. 2003 SCA75
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Philips Semiconductors – a worldwide compan y
Contact information
For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825
For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
Printed in The Netherlands 613514/02/pp8 Date of release: 2003 May 13 Document order number: 9397 750 11184
