RGP10M-E354 - VISHAY - Pdf.Support

RGP10A, RGP10B, RGP10D, RGP10G, RGP10J, RGP10K, RGP10M

www.vishay.com Vishay General Semiconductor

Revision: 07-Nov-16 1Document Number: 88700

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Glass Passivated Junction Fast Switching Plastic Rectifier

FEATURES

• Superectifier structure for high reliability condition

• Cavity-free glass-passivated junction

• Fast switching for high efficiency

• Low leakage current

• High forward surge capability

• Solder dip 275 °C max. 10 s, per JESD 22-B106

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

For use in fast switching rectification of power supply,

inverters, converters and freewheeling diodes for consumer

and telecommunication.

MECHANICAL DATA

Case: DO-204AL, molded epoxy over glass body

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test

Polarity: Color band denotes cathode end

PRIMARY CHARACTERISTICS

IF(AV) 1.0 A

VRRM 50 V, 100 V, 200 V, 400 V, 600 V,

800 V, 1000 V

IFSM 30 A

trr 150 ns, 250 ns, 500 ns

IR5.0 μA

VF1.3 V

TJ max. 175 °C

Package DO-204AL (DO-41)

Diode variation Single die

DO-204AL (DO-41)

SUPERECTIFIER®

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL RGP10A RGP10B RGP10D RGP10G RGP10J RGP10K RGP10M UNIT

Maximum repetitive peak

reverse voltage VRRM 50 100 200 400 600 800 1000 V

Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V

Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V

Maximum average forward rectified

current 0.375" (9.5 mm) lead length

at TA = 55 °C

IF(AV) 1.0 A

Peak forward surge current 8.3 ms

single half sine-wave

superimposed on rated load

IFSM 30 A

Maximum full load reverse current,

full cycle average 0.375" (9.5 mm)

lead length TA = 55 °C

IR(AV) 100 μA

Operating junction and storage

temperature range TJ, TSTG -65 to +175 °C

RGP10A, RGP10B, RGP10D, RGP10G, RGP10J, RGP10K, RGP10M

www.vishay.com Vishay General Semiconductor

Revision: 07-Nov-16 2Document Number: 88700

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, PCB mounted

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL RGP10A RGP10B RGP10D RGP10G RGP10J RGP10K RGP10M UNIT

Maximum

instantaneous

forward voltage

1.0 A VF1.3 V

Maximum DC

reverse current

at rated DC

blocking voltage

TA = 25 °C

5.0

μA

TA = 150 °C 200

Maximum reverse

recovery time

IF = 0.5 A, IR = 1.0 A,

Irr = 0.25 A trr 150 250 500 ns

Typical junction

capacitance 4.0 V, 1 MHz CJ15 pF

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL RGP10A RGP10B RGP10D RGP10G RGP10J RGP10K RGP10M UNIT

Typical thermal resistance RJA (1) 55 °C/W

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

RGP10J-E3/54 0.336 54 5500 13" diameter paper tape and reel

RGP10J-E3/73 0.336 73 3000 Ammo pack packaging

Average Forward Rectied Current (A)

Ambient Temperature (°C)

25 50 75 100 125 150 175

0.25

0.50

0.75

1.00

Resistive or Inductive Load

0.375" (9.5 mm) Lead Length

Forward Surge Current (A)

10 100

Number of Cycles at 60 Hz

TJ = TJ Max.

8.3 ms Single Half Sine-Wave

RGP10A, RGP10B, RGP10D, RGP10G, RGP10J, RGP10K, RGP10M

www.vishay.com Vishay General Semiconductor

Revision: 07-Nov-16 3Document Number: 88700

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Typical Instantaneous Forward Characteristics

Fig. 4 - Typical Reverse Characteristics

Fig. 5 - Typical Junction Capacitance

Fig. 6 - Typical Transient Thermal Impedance

PACKAGING OUTLINE DIMENSIONS in inches (millimeters)

Instantaneous Forward Voltage (V)

Instantaneous Forward Current (A)

0.4 0.6 0.8 1.0 1.2 1.4 1.6

0.01

0.1

= 25 °C

Pulse Width = 300 μs

1 % Duty Cycle

Percent of Rated Peak Reverse Voltage (%)

020 40 60 80 100

0.01

0.1

100

Instantaneous Reverse Current (μA)

= 125 °C

= 25 °C

= 75 °C

Reverse Voltage (V)

Junction Capacitance (pF)

100

= 25 °C

f = 1.0 MHz

sig

= 50 mV

p-p

0.01 0.1 110 100

0.1

100

t - Pulse Duration (s)

Transient Thermal Impedance (°C/W)

DO-204AL (DO-41)

1.0 (25.4)

MIN.

1.0 (25.4)

MIN.

0.205 (5.2)

0.160 (4.1)

0.107 (2.7)

0.080 (2.0)

DIA.

0.034 (0.86)

0.028 (0.71)

DIA.

• Lead diameter isfor sufx “E” part numbers

0.026 (0.66)

0.023 (0.58)

Note

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.