© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 1
One world. One KEMET
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Benets
• Established reliability options
• Taped and reeled per EIA 481–1
• Symmetrical, compliant terminations
• Laser-marked case
• 100% surge current test available on all case sizes
• Termination options B, C, H, K, T
• Weibull failure options B and C
• Voltage rating of 4 – 63 VDC
• Operatingtemperaturerangeof-55˚Cto+125˚C
• Capacitancevaluesof0.1μFto337μF
• AllpartstestedperGroupAofMIL–PRF–55365
• Approved for DSCC Drawing 07016 applications
Applications
Typicalapplicationsincludedecouplingandlteringinmilitaryand
aerospace applications.
Overview
The KEMET T493 Series is designed for the COTS
(Commercial Off-the-Shelf) requirements of military and
aerospace applications. This series is a surface mount product
offering various lead-frame plating options, Weibull grading
options, and surge current testing options. Standard, low, and
ulta-low ESR options are available. All lots of this series are
conditionedwithMIL–PRF–55365GroupAtesting.Thisseriesis
also approved for DSCC Drawing 07016 (please see part number
listspecictothisdrawing).
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
SPICE
Foradetailedanalysisofspecicpartnumbers,pleasevisitwww.kemet.comforafreedownloadofKEMET'sSPICEsoftware.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 22
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Ordering Information
T493 D227 K006 C H 61 20
Capacitor
Class Series Case Size Capacitance
Code(pF)
Capacitance
Tolerance Voltage FailureRate/
Design Lead Material Surge ESR
T =
Tantalum
Military
COTS
A, B, C,
D, E, X
Firsttwodigits
represent
signicant
gures.Third
digitspecies
number of zeros.
J = ±5%
K = ±10%
M = ±20%
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 = 63 V
A = N/A
B = 0.1%/1,000
hours
C = 0.01%/1,000
hours
C = Hot Solder Dipped
H = Standard Solder
Coated (SnPb 5% Pb
minimum)
B = Gold Plated
K=SolderFused
T = 100% Tin
N = Non-Magnetic 100%
Tin (Sn)
M = Non-Magnetic
(SnPb)
61 = None
62 = 10
Cycles 25ºC
63 = 10
cycles, -55ºC
and 85ºC
10 = ESR -
Standard
20 = ESR -
Low
30 = ESR -
Ultra low
Ordering Information DSCC 07016
07016- 001 K B H A
Drawing Number Dash Number Capacitance
Tolerance Reliability Grade Lead Material Surge
See Part Number
Reference
J = ±5%
K = ±10%
M = ±20%
B = 0.1%/1,000 hours
C = 0.01%/1,000 hours
C = Hot Solder Dipped
H = Standard Solder Coated
(SnPb 5% Pb minimum)
B = Gold Plated
A=+25ºCafterWeibull
B=-55ºCand+85ºCafter
Weibull
C=-55ºCand+85ºCbefore
Weibull
Z or no option= No test required
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°C to 125°C
Rated Capacitance Range 0.1–330μF@120Hz/25°C
Capacitance Tolerance J Tolerance (5%), K Tolerance (10%), M Tolerance (20%)
Rated Voltage Range 4 – 63 V
DF(120Hz) RefertoPartNumberElectricalSpecicationTable
ESR (100 kHz) RefertoPartNumberElectricalSpecicationTable
Leakage Current ≤0.01CV(µA)atratedvoltageafter5minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 33
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Qualication
Test
Condition
Characteristics
Endurance 85°C@ratedvoltage,2,000hours
125°C@2/3ratedvoltage,2,000hours
ΔC/C Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Storage Life 125°C@0volts,2,000hours
ΔC/C
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Thermal Shock MIL–STD–202, Method 107, Condition B, mounted,
-55°C to 125°C, 1,000 cycles
ΔC/C Within ±5% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Temperature Stability
Extreme temperature exposure at a
successionofcontinuousstepsat+25°C,
-55°C,+25°C,+85°C,+125°C,+25°C
+25°C -55°C +85°C +125°C
ΔC/C I L* ±10% ±10% ±20%
DF IL IL 1.5 x IL 1.5 x IL
DCL IL n/a 10 x IL 12 x IL
Surge Voltage 25°C and 85°C, 1.32 x rated voltage 1,000 cycles
(125°C, 1.2 x rated voltage)
ΔC/C Within ±5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
ΔC/C Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
Certication
MIL–PRF–55365/8
DSCC Drawing 07016
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 44
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (µF)
Frequency (Hz)
T493B106/020
T493E476/035
T493X226/035
Electrical Characteristics
ESRvs.Frequency
Capacitancevs.Frequency
0.01
0.1
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T493B106/020_IMP
T493E476/035_IMP
T493X226/035_IMP
T493B106/020_ESR
T493E476/035_ESR
T493X226/035_ESR
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 55
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Dimensions – Millimeters (Inches)
Metric will govern
15
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
KEMET EIA L* W* H*
F*±0.1
±(.004)
S* ±0.3
±(.012)
B* ±0.15
(Ref) ±.006
X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
A3216–18
3.2 ±0.2
(0.126 ±0.008)
1.6 ±0.2
(0.063 ±0.008)
1.6 ±0.2
(0.063 ±0.008) 1.2 (.047) 0.8 (.031) 0.4 (.016)
0.10 ± 0.10
(.004 ± .004) 0.4 (.016) 0.4 (.016) 0.13 (.005) 0.8 (.31) 1.1 (.043) 1.3 (.051)
B3528–21
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
1.9 ±0.2
(0.075 ±0.008) 2.2 (.087) 0.8 (.031) 0.4 (.016)
0.10 ± 0.10
(.004 ± .004) 0.5 (.020) 1.0 (.039) 0.13 (.005) 1.1 (0.043) 1.8 (.071) 2.2 (.087)
C6032–28
6.0 ±0.3
(0.236 ±0.03)
3.2 ±0.3
(0.126 ±0.012)
2.5 ±0.3
(0.098 ±0.012) 2.2 (.087) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)
D7343–31
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.8 ±0.3
(0.110 ±0.012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
X7343–43
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 ±0.3
(0.157 ±0.012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
E7360–38
7.3 ±0.3
(0.287 ±0.012)
6.0±0.3
(0.236 ±0.012)
3.6 ±0.2
(0.142 ±0.008) 4.1 (.161) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low prole cases do not have a bevel or a notch.
* MIL–PRF–55365/8 specied dimensions
Dimensions – Millimeters (Inches) DSCC 07016
H
L
H2
PP
1/2 H2
MINIMUM
SOLDERABLE
SURFACES
(SEE NOTE 5)
W2W
Case Size
Component
KEMET H* H2 Minimum L
P+/-0.3
(0.012)
WW2+/-0.1(0.004)
A1.6 ±0.2
(0.063 ±0.008) 0.7 (0.028) 3.2 ±0.2
(0.126 ±0.008) 0.8 (0.031) 1.6 ±0.2
(0.063 ±0.008) 1.2 (0.047)
B1.9 ±0.2
(0.075 ±0.008) 0.7 (0.028) 3.5 ±0.2
(0.138 ±0.008) 0.8 (0.031) 2.8 ±0.2
(0.110 ±0.008) 2.2 (0.087)
C2.5 ±0.3
(0.098 ±0.012) 1.0 (0.039) 6.0 ±0.3
(0.236 ±0.03) 1.3 (0.051) 3.2 ±0.3
(0.126 ±0.012) 2.2 (0.087)
D2.8 ±0.3
(0.110 ±0.012) 1.0 (0.039) 7.3 ±0.3
(0.287 ±0.012) 1.3 (0.051) 4.3 ±0.3
(0.169 ±0.012) 2.4 (0.094)
X2.74 ±0.3
(0.108 ±0.015) 1.22 (0.048) 6.93 (0.273)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 66
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF Standard
ESR
Low
ESR
Ultra-low
ESR
Moisture
Sensitivity
VDC µF KEMET/EIA (See below for
part options)
µAmps +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Reow
Temperature
≤ 260ºC
42.2 A/3216-18 T493A225(1)004(2)(3)(4)(5) 0.5 6.0 8.0 6.0 N/A 1
43.3 A/3216-18 T493A335(1)004(2)(3)(4)(5) 0.5 6.0 8.0 4.0 N/A 1
44.7 A/3216-18 T493A475(1)004(2)(3)(4)(5) 0.5 6.0 8.0 3.5 N/A 1
46.8 A/3216-18 T493A685(1)004(2)(3)(4)(5) 0.5 6.0 6.0 3.0 N/A 1
46.8 B/3528-21 T493B685(1)004(2)(3)(4)(5) 0.5 6.0 5.5 2.0 N/A 1
410 A/3216-18 T493A106(1)004(2)(3)(4)(5) 0.5 6.0 6.0 2.0 N/A 1
410 B/3528-21 T493B106(1)004(2)(3)(4)(5) 0.5 6.0 3.5 1.2 N/A 1
415 A/3216-18 T493A156(1)004(2)(3)(4)(5) 0.6 6.0 4.0 1.5 N/A 1
415 B/3528-21 T493B156(1)004(2)(3)(4)(5) 0.6 6.0 3.5 1.2 N/A 1
422 A/3216-18 T493A226(1)004(2)(3)(4)(5) 0.88 6.0 4.0 1.5 N/A 1
422 B/3528-21 T493B226(1)004(2)(3)(4)(5) 0.88 6.0 3.5 0.6 N/A 1
422 C/6032-28 T493C226(1)004(2)(3)(4)(5) 0.88 6.0 1.8 0.5 N/A 1
433 A/3216-18 T493A336(1)004(2)(3)(4)(5) 1.32 6.0 4.0 3.0 N/A 1
433 B/3528-21 T493B336(1)004(2)(3)(4)(5) 1.32 6.0 3.5 0.5 N/A 1
433 C/6032-28 T493C336(1)004(2)(3)(4)(5) 1.32 6.0 1.8 0.5 N/A 1
447 B/3528-21 T493B476(1)004(2)(3)(4)(5) 1.88 6.0 3.0 0.5 N/A 1
447 C/6032-28 T493C476(1)004(2)(3)(4)(5) 1.88 6.0 1.8 0.5 N/A 1
468 B/3528-21 T493B686(1)004(2)(3)(4)(5) 2.72 6.0 3.5 2.0 N/A 1
468 C/6032-28 T493C686(1)004(2)(3)(4)(5) 2.72 6.0 1.6 0.25 N/A 1
468 D/7343-31 T493D686(1)004(2)(3)(4)(5) 2.72 6.0 0.8 0.2 N/A 1
4100 A/3216-18 T493A107(1)004(2)(3)(4)(5) 430.0 1.4 N/A N/A 1
4100 B/3528-21 T493B107(1)004(2)(3)(4)(5) 48.0 1.0 0.7 0.50 1
4100 C/6032-28 T493C107(1)004(2)(3)(4)(5) 48.0 1.2 0.2 N/A 1
4100 D/7343-31 T493D107(1)004(2)(3)(4)(5) 48.0 0.8 0.2 N/A 1
4150 C/6032-28 T493C157(1)004(2)(3)(4)(5) 68.0 1.2 0.3 0.25 1
4150 D/7343-31 T493D157(1)004(2)(3)(4)(5) 68.0 0.8 0.15 N/A 1
4220 D/7343-31 T493D227(1)004(2)(3)(4)(5) 8.8 8.0 0.9 0.7 N/A 1
4330 D/7343-31 T493D337(1)004(2)(3)(4)(5) 13.2 8.0 0.7 0.15 N/A 1
4330 X/7343-43 T493X337(1)004(2)(3)(4)(5) 13.2 8.0 0.5 0.2 N/A 1
6.3 1.5 A/3216-18 T493A155(1)006(2)(3)(4(5) 0.5 6.0 8.0 6.0 N/A 1
6.3 2.2 A/3216-18 T493A225(1)006(2)(3)(4)(5) 0.5 6.0 8.0 6.0 N/A 1
6.3 3.3 A/3216-18 T493A335(1)006(2)(3)(4)(5) 0.5 6.0 8.0 6.0 N/A 1
6.3 4.7 A/3216-18 T493A475(1)006(2)(3)(4)(5) 0.5 6.0 6.0 3.5 N/A 1
6.3 4.7 B/3528-21 T493B475(1)006(2)(3)(4)(5) 0.5 6.0 5.5 3.5 N/A 1
6.3 6.8 A/3216-18 T493A685(1)006(2)(3)(4)(5) 0.5 6.0 6.0 2.0 N/A 1
6.3 6.8 B/3528-21 T493B685(1)006(2)(3)(4)(5) 0.5 6.0 3.5 1.2 N/A 1
6.3 10 A/3216-18 T493A106(1)006(2)(3)(4)(5) 0.63 6.0 4.0 2.0 N/A 1
6.3 10 B/3528-21 T493B106(1)006(2)(3)(4)(5) 0.63 6.0 3.5 1.0 N/A 1
6.3 15 A/3216-18 T493A156(1)006(2)(3)(4)(5) 0.945 6.0 4.0 1.5 N/A 1
6.3 15 B/3528-21 T493B156(1)006(2)(3)(4)(5) 0.945 6.0 3.5 0.7 N/A 1
6.3 15 C/6032-28 T493C156(1)006(2)(3)(4)(5) 0.945 6.0 1.8 0.6 N/A 1
6.3 22 A/3216-18 T493A226(1)006(2)(3)(4)(5) 1.386 6.0 4.0 3.0 N/A 1
6.3 22 B/3528-21 T493B226(1)006(2)(3)(4)(5) 1.386 6.0 3.5 0.6 N/A 1
6.3 22 C/6032-28 T493C226(1)006(2)(3)(4)(5) 1.386 6.0 1.8 0.5 N/A 1
6.3 33 B/3528-21 T493B336(1)006(2)(3)(4)(5) 2.079 6.0 3.0 0.6 N/A 1
6.3 33 C/6032-28 T493C336(1)006(2)(3)(4)(5) 2.079 6.0 1.8 0.3 N/A 1
6.3 47 B/3528-21 T493B476(1)006(2)(3)(4)(5) 2.961 6.0 3.5 2.0 N/A 1
6.3 47 C/6032-28 T493C476(1)006(2)(3)(4)(5) 2.961 6.0 1.6 0.25 N/A 1
6.3 47 D/7343-31 T493D476(1)006(2)(3)(4)(5) 2.961 6.0 0.8 0.22 N/A 1
VDC µF KEMET/EIA (See below for
part options)
µAmps +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Reow
Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR Ultra-low
ESR
Moisture
Sensitivity
Table 1A – Ratings & Part Number Reference
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1000Hrs), C (0.01%/1000Hrs) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates
Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull or 64 = 10 cycles -55°C +85°C before
Weibull. Designates Surge current option.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 77
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Table 1A – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1000Hrs), C (0.01%/1000Hrs) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates
Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull or 64 = 10 cycles -55°C +85°C before
Weibull. Designates Surge current option.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF Standard
ESR
Low
ESR
Ultra-low
ESR
Moisture
Sensitivity
VDC µF KEMET/EIA (See below for
part options)
µAmps +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Reow
Temperature
≤ 260ºC
6.3 68 B/3528-21 T493B686(1)006(2)(3)(4)(5) 4.284 8.0 1.0 0.65 N/A 1
6.3 68 C/6032-28 T493C686(1)006(2)(3)(4)(5) 4.284 6.0 1.2 0.2 N/A 1
6.3 68 D/7343-31 T493D686(1)006(2)(3)(4)(5) 4.284 6.0 0.8 0.2 0.18 1
6.3 100 B/3528-21 T493B107(1)006(2)(3)(4)(5) 6.3 15.0 10.0 8.0 0.70 1
6.3 100 C/6032-28 T493C107(1)006(2)(3)(4)(5) 6.3 8.0 1.2 0.3 0.15 1
6.3 100 D/7343-31 T493D107(1)006(2)(3)(4)(5) 6.3 8.0 0.8 0.15 N/A 1
6.3 150 C/6032-28 T493C157(1)006(2)(3)(4)(5) 9.45 8.0 1.2 0.3 0.20 1
6.3 150 D/7343-31 T493D157(1)006(2)(3)(4)(5) 9.45 8.0 0.7 0.15 N/A 1
6.3 220 C/6032-28 T493C227(1)006(2)(3)(4)(5) 13.86 10.0 1.2 0.3 0.23 1
6.3 220 D/7343-31 T493D227(1)006(2)(3)(4)(5) 13.86 8.0 0.7 0.1 0.10 1
6.3 220 X/7343-43 T493X227(1)006(2)(3)(4)(5) 13.86 8.0 0.7 0.15 0.07 1
6.3 330 D/7343-31 T493D337(1)006(2)(3)(4)(5) 20.79 8.0 0.5 0.15 0.10 1
6.3 330 X/7343-43 T493X337(1)006(2)(3)(4)(5) 20.79 8.0 0.5 0.1 0.07 1
6.3 470 X/7343-43 T493X477(1)006(2)(3)(4)(5) 29.61 10.0 0.2 0.1 0.05 1
10 1A/3216-18 T493A105(1)010(2)(3)(4)(5) 0.5 4.0 10.0 6.0 N/A 1
10 1.5 A/3216-18 T493A155(1)010(2)(3)(4)(5) 0.5 6.0 8.0 6.0 N/A 1
10 2.2 A/3216-18 T493A225(1)010(2)(3)(4)(5) 0.5 6.0 8.0 6.0 N/A 1
10 3.3 A/3216-18 T493A335(1)010(2)(3)(4)(5) 0.5 6.0 6.0 4.0 N/A 1
10 3.3 B/3528-21 T493B335(1)010(2)(3)(4)(5) 0.5 6.0 5.5 3.5 N/A 1
10 4.7 A/3216-18 T493A475(1)010(2)(3)(4)(5) 0.5 6.0 6.0 3.0 N/A 1
10 4.7 B/3528-21 T493B475(1)010(2)(3)(4)(5) 0.5 6.0 3.5 1.5 1.3 1
10 6.8 A/3216-18 T493A685(1)010(2)(3)(4)(5) 0.68 6.0 6.0 3.0 N/A 1
10 6.8 B/3528-21 T493B685(1)010(2)(3)(4)(5) 0.68 6.0 3.5 1.2 0.90 1
10 10 A/3216-18 T493A106(1)010(2)(3)(4)(5) 16.0 4.0 1.8 N/A 1
10 10 B/3528-21 T493B106(1)010(2)(3)(4)(5) 16.0 3.5 0.8 0.75 1
10 10 C/6032-28 T493C106(1)010(2)(3)(4)(5) 16.0 1.8 0.6 N/A 1
10 15 A/3216-18 T493A156(1)010(2)(3)(4)(5) 1.5 8.0 6.0 4.0 3.2 1
10 15 B/3528-21 T493B156(1)010(2)(3)(4)(5) 1.5 6.0 3.5 0.7 N/A 1
10 15 C/6032-28 T493C156(1)010(2)(3)(4)(5) 1.5 6.0 1.8 0.5 0.48 1
10 22 B/3528-21 T493B226(1)010(2)(3)(4)(5) 2.2 6.0 3.0 0.7 N/A 1
10 22 C/6032-28 T493C226(1)010(2)(3)(4)(5) 2.2 6.0 1.8 0.4 0.29 1
10 33 B/3528-21 T493B336(1)010(2)(3)(4)(5) 3.3 6.0 3.5 2.0 N/A 1
10 33 C/6032-28 T493C336(1)010(2)(3)(4)(5) 3.3 6.0 1.6 0.3 N/A 1
10 33 D/7343-31 T493D336(1)010(2)(3)(4)(5) 3.3 6.0 0.8 0.3 N/A 1
10 47 C/6032-28 T493C476(1)010(2)(3)(4)(5) 4.7 6.0 1.2 0.3 N/A 1
10 47 D/7343-31 T493D476(1)010(2)(3)(4)(5) 4.7 6.0 0.8 0.2 0.08 1
10 68 C/6032-28 T493C686(1)010(2)(3)(4)(5) 6.8 6.0 1.2 0.3 0.23 1
10 68 D/7343-31 T493D686(1)010(2)(3)(4)(5) 6.8 6.0 0.8 0.2 0.09 1
10 68 X/7343-43 T493X686(1)010(2)(3)(4)(5) 6.8 4.0 0.5 0.15 N/A 1
10 100 C/6032-28 T493C107(1)010(2)(3)(4)(5) 10 8.0 1.2 0.3 N/A 1
10 100 D/7343-31 T493D107(1)010(2)(3)(4)(5) 10 8.0 0.7 0.1 0.08 1
10 150 D/7343-31 T493D157(1)010(2)(3)(4)(5) 15 8.0 0.7 0.1 0.08 1
10 150 X/7343-43 T493X157(1)010(2)(3)(4)(5) 15 8.0 0.7 0.2 0.09 1
10 220 D/7343-31 T493D227(1)010(2)(3)(4)(5) 22 8.0 0.5 0.2 0.08 1
10 220 X/7343-43 T493X227(1)010(2)(3)(4)(5) 22 8.0 0.5 0.1 0.05 1
10 330 X/7343-43 T493X337(1)010(2)(3)(4)(5) 33 10.0 0.5 0.1 0.05 1
10 470 X/7343-43 T493X477(1)010(2)(3)(4)(5) 47 10.0 0.2 0.05 N/A 1
16 0.68 A/3216-18 T493A684(1)016(2)(3)(4)(5) 0.5 6.0 12.0 8.0 N/A 1
16 1A/3216-18 T493A105(1)016(2)(3)(4)(5) 0.5 4.0 10.0 6.0 N/A 1
VDC µF KEMET/EIA (See below for
part options)
µAmps +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Reow
Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR Ultra-low
ESR
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 88
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF Standard
ESR
Low
ESR
Ultra-low
ESR
Moisture
Sensitivity
VDC µF KEMET/EIA (See below for
part options)
µAmps +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Reow
Temperature
≤ 260ºC
16 1.5 A/3216-18 T493A155(1)016(2)(3)(4)(5) 0.5 6.0 8.0 6.0 N/A 1
16 2.2 A/3216-18 T493A225(1)016(2)(3)(4)(5) 0.5 6.0 6.0 4.0 N/A 1
16 3.3 A/3216-18 T493A335(1)016(2)(3)(4)(5) 0.528 6.0 6.0 3.5 N/A 1
16 3.3 B/3528-21 T493B335(1)016(2)(3)(4)(5) 0.528 6.0 3.5 2.0 N/A 1
16 4.7 A/3216-18 T493A475(1)016(2)(3)(4)(5) 0.752 6.0 6.0 3.0 N/A 1
16 4.7 B/3528-21 T493B475(1)016(2)(3)(4)(5) 0.752 6.0 3.5 1.5 N/A 1
16 6.8 A/3216-18 T493A685(1)016(2)(3)(4)(5) 1.088 6.0 7.0 3.0 N/A 1
16 6.8 B/3528-21 T493B685(1)016(2)(3)(4)(5) 1.088 6.0 3.5 1.2 N/A 1
16 6.8 C/6032-28 T493C685(1)016(2)(3)(4)(5) 1.088 6.0 1.9 0.8 0.75 1
16 10 A/3216-18 T493A106(1)016(2)(3)(4)(5) 1.6 6.0 3.0 N/A N/A 1
16 10 B/3528-21 T493B106(1)016(2)(3)(4)(5) 1.6 6.0 3.5 0.8 N/A 1
16 10 C/6032-28 T493C106(1)016(2)(3)(4)(5) 1.6 6.0 1.8 0.6 N/A 1
16 15 B/3528-21 T493B156(1)016(2)(3)(4)(5) 2.4 6.0 3.0 0.8 N/A 1
16 15 C/6032-28 T493C156(1)016(2)(3)(4)(5) 2.4 6.0 1.8 0.4 N/A 1
16 22 B/3528-21 T493B226(1)016(2)(3)(4)(5) 3.52 6.0 2.2 0.8 N/A 1
16 22 C/6032-28 T493C226(1)016(2)(3)(4)(5) 3.52 6.0 1.6 0.4 N/A 1
16 22 D/7343-31 T493D226(1)016(2)(3)(4)(5) 3.52 6.0 0.8 0.3 N/A 1
16 33 C/6032-28 T493C336(1)016(2)(3)(4)(5) 5.28 6.0 1.2 0.3 0.23 1
16 33 D/7343-31 T493D336(1)016(2)(3)(4)(5) 5.28 6.0 0.8 0.25 0.15 1
16 47 C/6032-28 T493C476(1)016(2)(3)(4)(5) 7.52 6.0 1.2 0.5 0.35 1
16 47 D/7343-31 T493D476(1)016(2)(3)(4)(5) 7.52 6.0 0.8 0.2 0.10 1
16 68 D/7343-31 T493D686(1)016(2)(3)(4)(5) 10.88 6.0 0.7 0.2 0.15 1
16 100 D/7343-31 T493D107(1)016(2)(3)(4)(5) 16 8.0 0.7 0.125 0.10 1
16 100 X/7343-43 T493X107(1)016(2)(3)(4)(5) 16 8.0 0.7 0.1 0.08 1
16 150 D/7343-31 T493D157(1)016(2)(3)(4)(5) 24 8.0 0.7 0.4 0.15 1
16 150 X/7343-43 T493X157(1)016(2)(3)(4)(5) 24 8.0 0.5 0.2 0.10 1
16 220 X/7343-43 T493X227(1)016(2)(3)(4)(5) 35.2 12.0 0.5 0.2 0.10 1
20 0.47 A/3216-18 T493A474(1)020(2)(3)(4)(5) 0.5 4.0 14.0 9.0 N/A 1
20 0.68 A/3216-18 T493A684(1)020(2)(3)(4)(5) 0.5 4.0 12.0 8.0 N/A 1
20 1A/3216-18 T493A105(1)020(2)(3)(4)(5) 0.5 4.0 10.0 5.5 N/A 1
20 1.5 A/3216-18 T493A155(1)020(2)(3)(4)(5) 0.5 6.0 8.0 4.5 N/A 1
20 1.5 B/3528-21 T493B155(1)020(2)(3)(4)(5) 0.5 6.0 6.0 4.0 N/A 1
20 2.2 A/3216-18 T493A225(1)020(2)(3)(4)(5) 0.5 6.0 7.0 4.0 N/A 1
20 2.2 B/3528-21 T493B225(1)020(2)(3)(4)(5) 0.5 6.0 3.5 1.5 N/A 1
20 3.3 A/3216-18 T493A335(1)020(2)(3)(4)(5) 0.66 6.0 7.0 4.0 N/A 1
20 3.3 B/3528-21 T493B335(1)020(2)(3)(4)(5) 0.66 6.0 3.5 1.3 N/A 1
20 4.7 A/3216-18 T493A475(1)020(2)(3)(4)(5) 0.94 8.0 6.0 1.8 N/A 1
20 4.7 B/3528-21 T493B475(1)020(2)(3)(4)(5) 0.94 6.0 3.5 1.0 N/A 1
20 4.7 C/6032-28 T493C475(1)020(2)(3)(4)(5) 0.94 6.0 2.4 0.6 N/A 1
20 6.8 B/3528-21 T493B685(1)020(2)(3)(4)(5) 1.36 6.0 3.5 1.0 N/A 1
20 6.8 C/6032-28 T493C685(1)020(2)(3)(4)(5) 1.36 6.0 1.9 0.6 N/A 1
20 10 B/3528-21 T493B106(1)020(2)(3)(4)(5) 26.0 3.0 1.0 N/A 1
20 10 C/6032-28 T493C106(1)020(2)(3)(4)(5) 26.0 1.8 0.5 0.48 1
20 15 C/6032-28 T493C156(1)020(2)(3)(4)(5) 36.0 1.7 0.4 0.38 1
20 15 D/7343-31 T493D156(1)020(2)(3)(4)(5) 36.0 1.0 0.35 0.28 1
20 22 C/6032-28 T493C226(1)020(2)(3)(4)(5) 4.4 6.0 1.2 0.4 N/A 1
20 22 D/7343-31 T493D226(1)020(2)(3)(4)(5) 4.4 6.0 0.8 0.3 0.18 1
20 33 D/7343-31 T493D336(1)020(2)(3)(4)(5) 6.6 6.0 0.8 0.2 0.15 1
20 47 D/7343-31 T493D476(1)020(2)(3)(4)(5) 9.4 6.0 0.7 0.2 0.10 1
VDC µF KEMET/EIA (See below for
part options)
µAmps +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Reow
Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR Ultra-low
ESR
Moisture
Sensitivity
Table 1A – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1000Hrs), C (0.01%/1000Hrs) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates
Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull or 64 = 10 cycles -55°C +85°C before
Weibull. Designates Surge current option.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 99
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF Standard
ESR
Low
ESR
Ultra-low
ESR
Moisture
Sensitivity
VDC µF KEMET/EIA (See below for
part options)
µAmps +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Reow
Temperature
≤ 260ºC
20 47 X/7343-43 T493X476(1)020(2)(3)(4)(5) 9.4 4.0 0.7 0.15 0.10 1
20 68 D/7343-31 T493D686(1)020(2)(3)(4)(5) 13.6 8.0 0.7 0.2 0.15 1
20 68 X/7343-43 T493X686(1)020(2)(3)(4)(5) 13.6 6.0 0.7 0.15 0.12 1
25 0.33 A/3216-18 T493A334(1)025(2)(3)(4)(5) 0.5 4.0 15.0 10.0 N/A 1
25 0.47 A/3216-18 T493A474(1)025(2)(3)(4)(5) 0.5 4.0 14.0 9.0 N/A 1
25 0.68 A/3216-18 T493A684(1)025(2)(3)(4)(5) 0.5 4.0 10.0 6.0 N/A 1
25 0.68 B/3528-21 T493B684(1)025(2)(3)(4)(5) 0.5 4.0 7.5 5.5 N/A 1
25 1A/3216-18 T493A105(1)025(2)(3)(4)(5) 0.5 4.0 8.0 4.0 N/A 1
25 1B/3528-21 T493B105(1)025(2)(3)(4)(5) 0.5 4.0 5.0 2.0 N/A 1
25 1.5 A/3216-18 T493A155(1)025(2)(3)(4)(5) 0.5 6.0 10.0 3.0 N/A 1
25 1.5 B/3528-21 T493B155(1)025(2)(3)(4)(5) 0.5 6.0 5.0 1.5 N/A 1
25 2.2 A/3216-18 T493A225(1)025(2)(3)(4)(5) 0.55 6.0 7.0 N/A N/A 1
25 2.2 B/3528-21 T493B225(1)025(2)(3)(4)(5) 0.55 6.0 4.5 1.2 N/A 1
25 2.2 C/6032-28 T493C225(1)025(2)(3)(4)(5) 0.55 6.0 3.5 2.2 1.30 1
25 3.3 B/3528-21 T493B335(1)025(2)(3)(4)(5) 0.825 6.0 3.5 2.0 N/A 1
25 3.3 C/6032-28 T493C335(1)025(2)(3)(4)(5) 0.825 6.0 2.5 1.2 0.75 1
25 4.7 B/3528-21 T493B475(1)025(2)(3)(4)(5) 1.175 6.0 1.5 1.0 N/A 1
25 4.7 C/6032-28 T493C475(1)025(2)(3)(4)(5) 1.175 6.0 2.4 0.6 0.58 1
25 6.8 C/6032-28 T493C685(1)025(2)(3)(4)(5) 1.7 6.0 1.9 0.6 0.49 1
25 6.8 D/7343-31 T493D685(1)025(2)(3)(4)(5) 1.7 6.0 1.4 1.0 N/A 1
25 10 C/6032-28 T493C106(1)025(2)(3)(4)(5) 2.5 6.0 1.5 0.5 0.45 1
25 10 D/7343-31 T493D106(1)025(2)(3)(4)(5) 2.5 6.0 1.0 0.4 N/A 1
25 15 C/6032-28 T493C156(1)025(2)(3)(4)(5) 3.75 6.0 1.5 0.9 N/A 1
25 15 D/7343-31 T493D156(1)025(2)(3)(4)(5) 3.75 6.0 1.0 0.35 0.28 1
25 15 X/7343-43 T493X156(1)025(2)(3)(4)(5) 3.75 6.0 0.7 0.2 N/A 1
25 22 D/7343-31 T493D226(1)025(2)(3)(4)(5) 5.5 6.0 0.8 0.2 N/A 1
25 22 X/7343-43 T493X226(1)025(2)(3)(4)(5) 5.5 4.0 0.7 0.23 N/A 1
25 33 D/7343-31 T493D336(1)025(2)(3)(4)(5) 8.25 6.0 0.7 0.4 0.09 1
25 33 X/7343-43 T493X336(1)025(2)(3)(4)(5) 8.25 6.0 0.7 0.3 0.18 1
25 47 D/7343-31 T493D476(1)025(2)(3)(4)(5) 11.75 10.0 0.7 0.2 0.12 1
25 47 X/7343-43 T493X476(1)025(2)(3)(4)(5) 11.75 6.0 0.7 0.3 0.15 1
25 68 X/7343-43 T493X686(1)025(2)(3)(4)(5) 17 8.0 0.3 N/A N/A 1
25 68 E/7360-38 T493E686(1)025(2)(3)(4)(5) 17 8.0 0.1 N/A N/A 1
35 0.1 A/3216-18 T493A104(1)035(2)(3)(4)(5) 0.5 4.0 20.0 10.0 N/A 1
35 0.15 A/3216-18 T493A154(1)035(2)(3)(4)(5) 0.5 4.0 19.0 6.0 N/A 1
35 0.22 A/3216-18 T493A224(1)035(2)(3)(4)(5) 0.5 4.0 18.0 6.0 N/A 1
35 0.33 A/3216-18 T493A334(1)035(2)(3)(4)(5) 0.5 4.0 15.0 6.0 N/A 1
35 0.47 A/3216-18 T493A474(1)035(2)(3)(4)(5) 0.5 4.0 14.0 4.0 N/A 1
35 0.47 B/3528-21 T493B474(1)035(2)(3)(4)(5) 0.5 4.0 8.0 2.5 1.5 1
35 0.68 A/3216-18 T493A684(1)035(2)(3)(4)(5) 0.5 4.0 10.0 6.0 N/A 1
35 0.68 B/3528-21 T493B684(1)035(2)(3)(4)(5) 0.5 4.0 6.5 2.5 N/A 1
35 1A/3216-18 T493A105(1)035(2)(3)(4)(5) 0.5 4.0 10.0 6.0 N/A 1
35 1B/3528-21 T493B105(1)035(2)(3)(4)(5) 0.5 4.0 5.0 2.0 1.5 1
35 1.5 B/3528-21 T493B155(1)035(2)(3)(4)(5) 0.525 6.0 5.0 3.0 N/A 1
35 1.5 C/6032-28 T493C155(1)035(2)(3)(4)(5) 0.525 6.0 4.5 2.5 N/A 1
35 2.2 B/3528-21 T493B225(1)035(2)(3)(4)(5) 0.77 6.0 4.0 2.5 1.5 1
35 2.2 C/6032-28 T493C225(1)035(2)(3)(4)(5) 0.77 6.0 3.5 1.5 0.75 1
35 3.3 B/3528-21 T493B335(1)035(2)(3)(4)(5) 1.155 6.0 3.5 1.3 N/A 1
VDC µF KEMET/EIA (See below for
part options)
µAmps +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Reow
Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR Ultra-low
ESR
Moisture
Sensitivity
Table 1A – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1000Hrs), C (0.01%/1000Hrs) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates
Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull or 64 = 10 cycles -55°C +85°C before
Weibull. Designates Surge current option.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 1010
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Table 1A – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1000Hrs), C (0.01%/1000Hrs) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates
Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull or 64 = 10 cycles -55°C +85°C before
Weibull. Designates Surge current option.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF Standard
ESR
Low
ESR
Ultra-low
ESR
Moisture
Sensitivity
VDC µF KEMET/EIA (See below for
part options)
µAmps +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Reow
Temperature
≤ 260ºC
35 3.3 C/6032-28 T493C335(1)035(2)(3)(4)(5) 1.155 6.0 2.5 0.8 0.60 1
35 4.7 B/3528-21 T493B475(1)035(2)(3)(4)(5) 1.6 6.0 1.5 N/A N/A 1
35 4.7 C/6032-28 T493C475(1)035(2)(3)(4)(5) 1.645 6.0 2.5 0.6 0.45 1
35 4.7 D/7343-31 T493D475(1)035(2)(3)(4)(5) 1.645 6.0 1.5 0.7 N/A 1
35 6.8 C/6032-28 T493C685(1)035(2)(3)(4)(5) 2.38 6.0 2.0 0.9 N/A 1
35 6.8 D/7343-31 T493D685(1)035(2)(3)(4)(5) 2.38 6.0 1.3 0.5 0.40 1
35 10 C/6032-28 T493C106(1)035(2)(3)(4)(5) 3.5 6.0 2.0 1.2 N/A 1
35 10 D/7343-31 T493D106(1)035(2)(3)(4)(5) 3.5 6.0 1.0 0.3 0.25 1
35 10 X/7343-43 T493X106(1)035(2)(3)(4)(5) 3.5 4.0 0.9 0.25 0.18 1
35 15 C/6032-28 T493C156(1)035(2)(3)(4)(5) 5.3 6.0 0.45 N/A N/A 1
35 15 D/7343-31 T493D156(1)035(2)(3)(4)(5) 5.25 6.0 0.8 0.3 0.23 1
35 15 X/7343-43 T493X156(1)035(2)(3)(4)(5) 5.25 6.0 0.9 0.3 0.20 1
35 22 D/7343-31 T493D226(1)035(2)(3)(4)(5) 7.7 6.0 0.7 0.4 0.20 1
35 22 X/7343-43 T493X226(1)035(2)(3)(4)(5) 7.7 6.0 0.7 0.3 0.20 1
35 33 D/7343-31 T493D336M035(2)(3)(4)(5) 11.6 6.0 0.3 N/A N/A 1
35 33 X/7343-43 T493X336(1)035(2)(3)(4)(5) 11.55 6.0 0.6 0.3 0.18 1
35 47 X/7343-43 T493X476(1)035(2)(3)(4)(5) 16.45 6.0 0.3 N/A N/A 1
35 47 E/7360-38 T493E476(1)035(2)(3)(4)(5) 16.45 10.0 0.5 0.3 N/A 1
50 0.1 A/3216-18 T493A104(1)050(2)(3)(4)(5) 0.5 4.0 20.0 10.0 N/A 1
50 0.15 A/3216-18 T493A154(1)050(2)(3)(4)(5) 0.5 4.0 19.0 10.0 N/A 1
50 0.15 B/3528-21 T493B154(1)050(2)(3)(4)(5) 0.5 4.0 16.0 10.0 N/A 1
50 0.22 B/3528-21 T493B224(1)050(2)(3)(4)(5) 0.5 4.0 14.0 10.0 N/A 1
50 0.33 B/3528-21 T493B334(1)050(2)(3)(4)(5) 0.5 4.0 10.0 2.5 N/A 1
50 0.47 B/3528-21 T493B474(1)050(2)(3)(4)(5) 0.5 4.0 9.0 2.0 N/A 1
50 0.47 C/6032-28 T493C474(1)050(2)(3)(4)(5) 0.5 4.0 8.0 1.8 N/A 1
50 0.68 C/6032-28 T493C684(1)050(2)(3)(4)(5) 0.5 4.0 7.0 1.6 N/A 1
50 1C/6032-28 T493C105(1)050(2)(3)(4)(5) 0.5 4.0 5.5 1.6 1.3 1
50 1.5 C/6032-28 T493C155(1)050(2)(3)(4)(5) 0.75 6.0 4.5 1.5 N/A 1
50 1.5 D/7343-31 T493D155(1)050(2)(3)(4)(5) 0.75 6.0 3.5 1.0 N/A 1
50 2.2 C/6032-28 T493C225(1)050(2)(3)(4)(5) 1.1 6.0 3.5 1.5 N/A 1
50 2.2 D/7343-31 T493D225(1)050(2)(3)(4)(5) 1.1 6.0 2.5 0.8 0.60 1
50 3.3 D/7343-31 T493D335(1)050(2)(3)(4)(5) 1.65 6.0 2.0 0.8 0.70 1
50 4.7 D/7343-31 T493D475(1)050(2)(3)(4)(5) 2.35 6.0 1.5 0.6 0.28 1
50 4.7 X/7343-43 T493X475(1)050(2)(3)(4)(5) 2.35 4.0 0.9 0.3 N/A 1
50 6.8 D/7343-31 T493D685(1)050(2)(3)(4)(5) 3.4 6.0 0.6 0.3 N/A 1
50 6.8 X/7343-43 T493X685(1)050(2)(3)(4)(5) 3.4 6.0 1.0 0.5 N/A 1
50 10 X/7343-43 T493X106(1)050(2)(3)(4)(5) 56.0 0.7 0.4 N/A 1
63 6.8 X/7343-43 T493X685(1)063(2)(3)(4)(5) 4.3 6.0 1.0 0.6 0.3 1
63 10 X/7343-43 T493X106(1)063(2)(3)(4)(5) 6.3 6.0 0.6 0.4 0.2 1
VDC µF KEMET/EIA (See below for
part options)
µAmps +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Ω @ 20ºC
100 kHz
Maximum
Reow
Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR Ultra-low
ESR
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 1111
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DSCC Drawing 07016
Part Number
DC
Leakage DF Standard
ESR
Moisture
Sensitivity
VDC µF KEMET/EIA
See page 2 for
Ordering Information
See page 2 for
Ordering Information
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @+20ºC
100 kHz Max
Temperature
≤ 260ºC
433 A/3216-18 T493A336(1)004(2)(3)(4)20 07016-001(1)(2)(3)(4) 1.3 6.0 3.0 1
4100 B/3528-20 T493B107(1)004(2)(3)(4)20 07016-004(1)(2)(3)(4) 4.0 8.0 0.9 1
6.3 3.3 A/3216-18 T493A335(1)006(2)(3)(4)10 07016-006(1)(2)(3)(4) 0.5 6.0 8.0 1
6.3 4.7 A/3216-18 T493A475(1)006(2)(3)(4)10 07016-007(1)(2)(3)(4) 0.5 6.0 6.0 1
6.3 6.8 A/3216-18 T493A685(1)006(2)(3)(4)20 07016-008(1)(2)(3)(4) 0.5 6.0 5.0 1
6.3 10 A/3216-18 T493A106(1)006(2)(3)(4)10 07016-009(1)(2)(3)(4) 0.6 6.0 4.0
6.3 15 A/3216-18 T493A156(1)006(2)(3)(4)20 07016-010(1)(2)(3)(4) 0.9 6.0 3.5 1
6.3 22 A/3216-18 T493A226(1)006(2)(3)(4)20 07016-011(1)(2)(3)(4) 1.4 6.0 3.0 1
6.3 22 B/3528-20 T493B226(1)006(2)(3)(4)20 07016-012(1)(2)(3)(4) 1.4 6.0 0.6 1
6.3 33 B/3528-20 T493B336(1)006(2)(3)(4)20 07016-013(1)(2)(3)(4) 2.1 6.0 0.6 1
6.3 47 C/6032-28 T493C476(1)006(2)(3)(4)20 07016-014(1)(2)(3)(4) 3.0 6.0 0.3 1
6.3 68 C/6032-28 T493C686(1)006(2)(3)(4)20 07016-016(1)(2)(3)(4) 4.3 6.0 0.2 1
6.3 100 C/6032-28 T493C107(1)006(2)(3)(4)30 07016-017(1)(2)(3)(4) 6.3 6.0 0.15 1
6.3 220 D/7343-31 T493D227(1)006(2)(3)(4)20 07016-020(1)(2)(3)(4) 13.9 8.0 0.1 1
6.3 330 X/7343-43 T493X337(1)006(2)(3)(4)20 07016-021(1)(2)(3)(4) 20.8 8.0 0.1
10 4.7 A/3216-18 T493A475(1)010(2)(3)(4)20 07016-026(1)(2)(3)(4) 0.5 6.0 5.0 1
10 6.8 A/3216-18 T493A685(1)010(2)(3)(4)20 07016-027(1)(2)(3)(4) 0.7 6.0 4.0 1
10 10 A/3216-18 T493A106(1)010(2)(3)(4)10 07016-028(1)(2)(3)(4) 1.0 6.0 3.0 1
10 10 A/3216-18 T493A106(1)010(2)(3)(4)20 07016-029(1)(2)(3)(4) 1.0 6.0 1.8 1
10 15 A/3216-18 T493A156(1)010(2)(3)(4)30 07016-030(1)(2)(3)(4) 1.5 6.0 3.2 1
10 15 B/3528-20 T493B156(1)010(2)(3)(4)20 07016-032(1)(2)(3)(4) 1.5 6.0 0.6 1
10 22 B/3528-20 T493B226(1)010(2)(3)(4)20 07016-033(1)(2)(3)(4) 2.2 6.0 0.7 1
10 22 C/6032-28 T493C226(1)010(2)(3)(4)30 07016-035(1)(2)(3)(4) 2.2 6.0 0.3 1
10 33 B/3528-20 T493B336(1)010(2)(3)(4)10 07016-037(1)(2)(3)(4) 3.3 6.0 0.6 1
10 33 C/6032-28 T493C336(1)010(2)(3)(4)20 07016-039(1)(2)(3)(4) 3.3 6.0 0.5
10 47 C/6032-28 T493C476(1)010(2)(3)(4)20 07016-040(1)(2)(3)(4) 4.7 6.0 0.3 1
10 68 C/6032-28 T493C686(1)010(2)(3)(4)20 07016-042(1)(2)(3)(4) 6.8 8.0 0.3 1
10 68 D/7343-31 T493D686(1)010(2)(3)(4)30 07016-044(1)(2)(3)(4) 6.8 6.0 0.15 1
10 220 D/7343-31 T493D227(1)010(2)(3)(4)30 07016-049(1)(2)(3)(4) 22.0 8.0 0.15 1
10 220 X/7343-43 T493X227(1)010(2)(3)(4)30 07016-051(1)(2)(3)(4) 22.0 8.0 0.05 1
10 330 X/7343-43 T493X337(1)010(2)(3)(4)20 07016-054(1)(2)(3)(4) 33.0 8.0 0.1 1
10 330 X/7343-43 T493X337(1)010(2)(3)(4)30 07016-055(1)(2)(3)(4) 33.0 8.0 0.05 1
16 2.2 A/3216-18 T493A225(1)016(2)(3)(4)30 07016-060(1)(2)(3)(4) 0.5 6.0 5.5 1
16 3.3 A/3216-18 T493A335(1)016(2)(3)(4)10 07016-061(1)(2)(3)(4) 0.5 6.0 5.0 1
16 3.3 A/3216-18 T493A335(1)016(2)(3)(4)20 07016-062(1)(2)(3)(4) 0.5 6.0 3.5 1
16 6.8 B/3528-20 T493B685(1)016(2)(3)(4)20 07016-065(1)(2)(3)(4) 1.1 6.0 1.2 1
16 10 B/3528-20 T493B106(1)016(2)(3)(4)20 07016-067(1)(2)(3)(4) 1.6 6.0 0.9 1
16 15 B/3528-20 T493B156(1)016(2)(3)(4)20 07016-068(1)(2)(3)(4) 2.4 6.0 0.8 1
16 22 C/6032-28 T493C226(1)016(2)(3)(4)20 07016-071(1)(2)(3)(4) 3.5 6.0 0.375 1
16 33 C/6032-28 T493C336(1)016(2)(3)(4)20 07016-074(1)(2)(3)(4) 5.3 6.0 0.3 1
16 47 C/6032-28 T493C476(1)016(2)(3)(4)30 07016-076(1)(2)(3)(4) 7.5 6.0 0.35 1
16 68 D/7343-31 T493D686(1)016(2)(3)(4)30 07016-079(1)(2)(3)(4) 10.9 6.0 0.15 1
16 100 D/7343-31 T493D107(1)016(2)(3)(4)20 07016-080(1)(2)(3)(4) 16.0 6.0 0.125 1
16 150 D/7343-31 T493D157(1)016(2)(3)(4)30 07016-082M(1)(2)(3)(4) 24.0 6.0 0.15 1
16 150 E/7260-38 T493E157(1)016(2)(3)(4)10 07016-084(1)(2)(3)(4) 24.0 6.0 0.05 1
20 1.5 A/3216-18 T493A155(1)020(2)(3)(4)20 07016-086(1)(2)(3)(4) 0.5 6.0 6.5 1
20 4.7 A/3216-18 T493A475(1)020(2)(3)(4)10 07016-088(1)(2)(3)(4) 0.9 6.0 4.0
20 4.7 A/3216-18 T493A475(1)020(2)(3)(4)20 07016-089(1)(2)(3)(4) 0.9 6.0 1.8 1
20 4.7 B/3528-20 T493B475(1)020(2)(3)(4)20 07016-090(1)(2)(3)(4) 0.9 6.0 1.0 1
VDC µF KEMET/EIA
See page 2 for
Ordering Information
See page 2 for
Ordering Information
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @+20ºC
100 kHz Max
Temperature
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DSCC Drawing 07016
Part Number
DC
Leakage DF Standard
ESR
Moisture
Sensitivity
Table 1B – DSCC 07016, Ratings & Part Number Reference
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 1212
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DSCC Drawing 07016
Part Number
DC
Leakage DF Standard
ESR
Moisture
Sensitivity
VDC µF KEMET/EIA
See page 2 for
Ordering Information
See page 2 for
Ordering Information
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @+20ºC
100 kHz Max
Temperature
≤ 260ºC
20 6.8 B/3528-20 T493B685(1)020(2)(3)(4)20 07016-091(1)(2)(3)(4) 1.4 6.0 1.0 1
20 10 B/3528-20 T493B106(1)020(2)(3)(4)20 07016-092(1)(2)(3)(4) 2.0 6.0 1.0 1
20 10 C/6032-28 T493C106(1)020(2)(3)(4)20 07016-094(1)(2)(3)(4) 2.0 6.0 0.7 1
20 15 C/6032-28 T493C156(1)020(2)(3)(4)20 07016-096(1)(2)(3)(4) 3.0 6.0 0.4 1
20 22 C/6032-28 T493C226(1)020(2)(3)(4)20 07016-098(1)(2)(3)(4) 4.4 6.0 0.4 1
20 33 D/7343-31 T493D336(1)020(2)(3)(4)20 07016-100(1)(2)(3)(4) 6.6 6.0 0.2 1
20 47 D/7343-31 T493D476(1)020(2)(3)(4)20 07016-102(1)(2)(3)(4) 9.4 6.0 0.2 1
20 68 D/7343-31 T493D686(1)020(2)(3)(4)20 07016-104(1)(2)(3)(4) 13.6 6.0 0.2 1
20 68 X/7343-43 T493X686(1)020(2)(3)(4)20 07016-106(1)(2)(3)(4) 13.6 6.0 0.2 1
25 0.68 A/3216-18 T493A684(1)025(2)(3)(4)10 07016-108M(1)(2)(3)(4) 0.5 4.0 10.0 1
25 1A/3216-18 T493A105(1)025(2)(3)(4)10 07016-109(1)(2)(3)(4) 0.5 4.0 8.0 1
25 1.5 A/3216-18 T493A155(1)025(2)(3)(4)10 07016-110(1)(2)(3)(4) 0.5 6.0 7. 5 1
25 1.5 A/3216-18 T493A155(1)025(2)(3)(4)20 07016-111(1)(2)(3)(4) 0.5 6.0 3.0
25 2.2 B/3528-20 T493B225(1)025(2)(3)(4)20 07016-113(1)(2)(3)(4) 0.6 6.0 2.0 1
25 3.3 B/3528-20 T493B335(1)025(2)(3)(4)20 07016-114(1)(2)(3)(4) 0.8 6.0 2.0 1
25 4.7 B/3528-20 T493B475(1)025(2)(3)(4)10 07016-116(1)(2)(3)(4) 1.2 6.0 1.5 1
25 4.7 B/3528-20 T493B475(1)025(2)(3)(4)20 07016-117(1)(2)(3)(4) 1.2 6.0 0.7
25 6.8 C/6032-28 T493C685(1)025(2)(3)(4)20 07016-120(1)(2)(3)(4) 1.7 6.0 0.7 1
25 10 C/6032-28 T493C106(1)025(2)(3)(4)10 07016-121(1)(2)(3)(4) 2.5 6.0 0.5 1
25 10 C/6032-28 T493C106(1)025(2)(3)(4)20 07016-122(1)(2)(3)(4) 2.5 6.0 0.3
25 22 D/7343-31 T493D226(1)025(2)(3)(4)20 07016-125(1)(2)(3)(4) 5.5 6.0 0.2 1
25 33 D/7343-31 T493D336(1)025(2)(3)(4)20 07016-127(1)(2)(3)(4) 8.3 6.0 0.3 1
25 33 D/7343-31 T493D336(1)025(2)(3)(4)30 07016-128(1)(2)(3)(4) 8.3 6.0 0.09
25 47 D/7343-31 T493D476(1)025(2)(3)(4)20 07016-130M(1)(2)(3)(4) 11.8 6.0 0.25 1
25 47 D/7343-31 T493D476(1)025(2)(3)(4)30 07016-131M(1)(2)(3)(4) 11.8 6.0 0.175
25 68 E/7260-38 T493E686(1)025(2)(3)(4)10 07016-132(1)(2)(3)(4) 17.0 8.0 0.1 1
35 0.47 A/3216-18 T493A474(1)035(2)(3)(4)20 07016-133M(1)(2)(3)(4) 0.5 4.0 12.0 1
35 0.68 A/3216-18 T493A684(1)035(2)(3)(4)20 07016-134M(1)(2)(3)(4) 0.5 4.0 8.0 1
35 1A/3216-18 T493A105(1)035(2)(3)(4)20 07016-135(1)(2)(3)(4) 0.5 4.0 7.5 1
35 1.5 B/3528-20 T493B155(1)035(2)(3)(4)10 07016-137(1)(2)(3)(4) 0.5 6.0 5.2 1
35 2.2 B/3528-20 T493B225(1)035(2)(3)(4)30 07016-138(1)(2)(3)(4) 0.8 6.0 2.0 1
35 4.7 B/3528-20 T493B475(1)035(2)(3)(4)10 07016-140(1)(2)(3)(4) 1.6 6.0 1.5 1
35 6.8 D/7343-31 T493D685(1)035(2)(3)(4)30 07016-143(1)(2)(3)(4) 2.4 6.0 0.4 1
35 10 C/6032-28 T493C106(1)035(2)(3)(4)20 07016-144(1)(2)(3)(4) 3.5 6.0 1.6 1
35 15 C/6032-28 T493C156(1)035(2)(3)(4)10 07016-146(1)(2)(3)(4) 5.3 6.0 0.5 1
35 15 D/7343-31 T493D156(1)035(2)(3)(4)20 07016-147(1)(2)(3)(4) 5.3 6.0 0.3 1
35 22 D/7343-31 T493D226(1)035(2)(3)(4)20 07016-149(1)(2)(3)(4) 7.7 6.0 0.4 1
35 33 D/7343-31 T493D336M035(2)(3)(4)10 07016-152M(2)(3)(4) 11.6 6.0 0.3 1
35 33 X/7343-43 T493X336(1)035(2)(3)(4)20 07016-154M(1)(2)(3)(4) 11.6 6.0 0.3 1
50 0.15 A/3216-18 T493A154(1)050(2)(3)(4)20 07016-157M(1)(2)(3)(4) 0.5 4.0 15.0 1
50 0.47 B/3528-20 T493B474(1)050(2)(3)(4)20 07016-160(1)(2)(3)(4) 0.5 4.0 9.5 1
50 1.5 C/6032-28 T493C155(1)050(2)(3)(4)20 07016-164(1)(2)(3)(4) 0.8 6.0 2.0 1
50 1.5 D/7343-31 T493D155(1)050(2)(3)(4)20 07016-165(1)(2)(3)(4) 0.8 6.0 1.5 1
50 2.2 D/7343-31 T493D225(1)050(2)(3)(4)20 07016-166(1)(2)(3)(4) 1.1 6.0 1.2 1
50 3.3 D/7343-31 T493D335(1)050(2)(3)(4)20 07016-167(1)(2)(3)(4) 1.7 6.0 0.8 1
50 4.7 D/7343-31 T493D475(1)050(2)(3)(4)30 07016-168(1)(2)(3)(4) 2.4 6.0 0.3 1
50 6.8 X/7343-43 T493X685(1)050(2)(3)(4)20 07016-171(1)(2)(3)(4) 3.4 6.0 0.4
VDC µF KEMET/EIA
See page 2 for
Ordering Information
See page 2 for
Ordering Information
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @+20ºC
100 kHz Max
Temperature
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DSCC Drawing 07016
Part Number
DC
Leakage DF Standard
ESR
Moisture
Sensitivity
Table 1B – DSCC 07016, Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 1313
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Recommended Voltage Derating Guidelines
-55°C to 85°C 85°C to 125°C
% Change in Working DC
Voltage with Temperature
VR67% of VR
Recommended Maximum
Application Voltage
50% of VR33% of VR
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage,ifany,mustnotexceedtheallowablelimitsspeciedfor
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤25°C
85°C
125°C
1.00
0.90
0.40
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
KEMET
Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 25°C
w/+20°C Rise
A
3216–18
75
B
3528–21
85
C
6032–28
110
D
7343–31
150
X
7343–43
165
E
7360–38
200
S
3216–12
60
T
3528–12
70
U
6032–15
90
V
7343–20
125
T510X
7343–43
270
T510E
7360–38
285
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature Compensation
Multiplier table for details.
0%
20%
40%
60%
80%
100%
120%
-55 25 85 125
% Working Voltage
% Change in Working DC Voltage
with Temperature
Temperature (ºC)
67%
33%
Recommended Maximum
Application Voltage (As %
of Rated Voltage)
R = ESR at specied frequency (ohms)
Z = Impedance at specied frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 1414
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positiveterminalisidentiedonthecapacitorbodybyastripeplusinsomecasesabevelededge.Asmalldegreeoftransientreverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated voltage
85°C
5% of Rated voltage
125°C
1% of Rated voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
3528–21
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
7343–31
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
L
6032-19
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
M
3528-15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
H
7360-20
4.25
2.77
3.67
10.22
7.3 0
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
E
1
7360–38
4.25
2.77
3.67
10.22
7.3 0
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
Q
7343-12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
R2
2012-12
1.05
1.83
0.15
4.82
2.50
0.93
1.50
0.22
3.72
2.00
0.83
1.12
0.38
2.86
1.74
S2
3216–12
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X
1
7343–43
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y
1
7343–40
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and
provides a wider process window for reow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for reow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land
pattern variations the user should perform qualication testing based on the conditions outlined in IPC
standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 1515
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMET’s families of surface mount capacitors are compatible
withwave(singleordual),convection,IR,orvaporphasereow
techniques. Preheating of these components is recommended
toavoidextremethermalstress.KEMET'srecommended
proleconditionsforconvectionandIRreowreecttheprole
conditions of the IPC/J–STD–020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
ofthreereowpassesattheseconditions.
Please note that although the X/7343–43 case size can withstand
wavesoldering,thetallprole(4.3mmmaximum)dictatescarein
wave process development.
Handsolderingshouldbeperformedwithcareduetothedifculty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
andthetermination,untilreowoccurs.Oncereowoccurs,the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
Duringtypicalreowoperations,aslightdarkeningofthegold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Prole Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)100°C 150°C
Temperature Maximum (T
Smax
)150°C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (TP to TL)
6°C/seconds maximum
6°C/seconds maximum
Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
MNO2 /Ta2O5/Ta Silver Adhesive
Carbon
Silver Paint Washer
Tantalum Wire
Weld
Leadframe
(-Cathode) Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 1616
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Capacitor Marking
KEMET
Military
COTS
Rated
Voltage
156
25 K
230
+Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* 230 = 30th week of 2012
Date Code *
1
st
digit = Last number of Year
9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%
relativehumidity.Temperatureuctuationsshouldbeminimizedtoavoidcondensationonthepartsandatmospheresshouldbefreeof
chlorineandsulphurbearingcompounds.Foroptimizedsolderabilitychipstockshouldbeusedpromptly,preferablywithinthreeyears
of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 1717
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Tape & Reel Packaging Information
KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in
accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging
system is compatible with all tape-fed automatic pick-and-place systems.
Table 3 – Packaging Quantity
Case Code
Tape Width
(mm) 7" Reel* 13" Reel*
KEMET
EIA
I
3216-10
8
3,000
12,000
S
3216-12
8
2,500
10,000
T
3528-12
8
2,500
10,000
M
3528-15
8
2,000
8,000
U
6032-15
12
1,000
5,000
L
6032-19
12
1,000
5,000
W
7343-15
12
1,000
3,000
Z
7343-17
12
1,000
3,000
V
7343-20
12
1,000
3,000
A
3216-18
8
2,000
9,000
B
3528-21
8
2,000
8,000
C
6032-28
12
500
3,000
D
7343-31
12
500
2,500
Y
7343-40
12
500
2,000
X
7343-43
12
500
2,000
E/T428P
7360-38
12
500
2,000
H
7360-20
12
1,000
2,500
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
8 mm (0.315")
or
12 mm (0.472") 180 mm (7.0")
or
330 mm (13.0")
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 1818
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
Po
T
F
W
Center Lines of Cavity
Ao
Bo
User Direction of Unreeling
Cover Tape
Ko
B
1
is for tape feeder reference only,
including draft concentric about B
o.
T
2
ØD
1
ØDo
B
1
S
1
T
1
E
1
E
2
P
1
P
2
Embossment
For cavity size,
see Note 1 Table 4
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0
D
1
Minimum
Note 1
E1P0 P2
R Reference
Note 2
S
1
Minimum
Note 3
T Maximum T1 Maximum
8 mm
1.5+0.10/-0.0
(0.059+0.004/-0.0)
1.0
(0.039)
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
25.0
(0.984)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm 1.5
(0.059)
30
(1.181)
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch
B
1
Maximum
Note 4
E2 Minimum F P1 T2 Maximum W Maximum A0,B0 & K0
8 mm Single (4 mm)
4.35
(0.171)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
4.0 ±0.10
(0.157 ±0.004)
2.5
(0.098)
8.3
(0.327)
Note 512 mm
Single (4 mm) &
Double (8 mm)
8.2
(0.323)
10.25
(0.404)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
12.3
(0.484)
16 mm Triple (12 mm)
12.1
(0.476)
14.25
(0.561)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
16.3
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity de ned by A0, B0 and K0 shall surround the component with suf cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 1919
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width Peel Strength
8 mm 0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
Ao
Bo
°
T
°
s
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Tape Maximum
Width (mm) Rotation (°
T)
8,12 20
16 – 200 10 Tape Maximum
Width (mm) Rotation ( °
S)
8,12 20
16 – 56 10
72 – 200 5
Typical Pocket Centerline
Typical Component Centerline
Figure 3 – Maximum Lateral Movement
0.5 mm maximum
0.5 mm maximum
8 mm & 12 mm Tape
1.0 mm maximum
1.0 mm maximum
16 mm Tape
Figure 4 – Bending Radius
RR
Bending
Radius
Embossed
Carrier
Punched
Carrier
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 2020
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Figure 5 – Reel Dimensions
AD(See Note)
Full Radius,
See Note
B(see Note)
Access Hole at
Slot Location
(Ø 40 mm minimum)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
W3(Includes
flange distortion
at outer edge)
W2(Measured at hub)
W1(Measured at hub)
C
(Arbor hole
diameter)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size A B Minimum C D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0+0.5/-0.2
(0.521+0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size N Minimum W
1
W
2
Maximum W
3
8 mm
50
(1.969)
8.4+1.5/-0.0
(0.331+0.059/-0.0)
14.4
(0.567)
Shall accommodate tape width
without interference
12 mm
12.4+2.0/-0.0
(0.488+0.078/-0.0)
18.4
(0.724)
16 mm
16.4+2.0/-0.0
(0.646+0.078/-0.0)
22.4
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 2121
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Figure 6 – Tape Leader & Trailer Dimensions
Trailer
160 mm Minimum
Carrier Tape
END START
Round Sprocket Holes
Elongated Sprocket Holes
(32 mm tape and wider)
Top Cover Tape
Top Cover Tape
Punched Carrier
8 mm & 12 mm only
Embossed Carrier
Components
100 mm
Minimum Leader
400 mm Minimum
Figure 7 – Maximum Camber
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
Elongated sprocket holes
(32 mm & wider tapes)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 2222
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax:864-963-6521
Corporate Of ces
FortLauderdale,FL
Tel: 954-766-2800
North America
Southeast
LakeMary,FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-994-1030
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Paris,France
Tel: 33-1-4646-1006
Sasso Marconi, Italy
Tel: 39-051-939111
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Kamen, Germany
Tel: 49-2307-438110
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
Espoo,Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 2323
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Other KEMET Resources
Tools
Resource Location
CongureAPart:CapEdge http://capacitoredge.kemet.com
SPICE&FITSoftware http://www.kemet.com/spice
SearchOurFAQs:KnowledgeEdge http://www.kemet.com/keask
Electrolytic LifeCalculator http://www.kemet.com:8080/elc
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
notintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.TheInformationisintendedforuseonly
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2007_T493 • 7/22/2013 2424
Tantalum Surface Mount Capacitors – High Reliability COTS (CWR11 Style)
T493 Series Military/Aerospace COTS MnO2
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing
Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com
Date: 2013.07.26 13:18:07 -04'00'