www.clare.com
DS-CPC1916-R05 1
CPC1916
Single-Pole, Normally Open
OptoMOS® Power SIP Relay
RoHS
2002/95/EC e3
Pb
Part # Description
CPC1916Y 4-Pin (8-Pin Body) Power SIP Package (25 per tube)
Parameter Rating Units
Blocking Voltage 100 VP
Load Current 2.5 ADC/Arms
On-Resistance 0.34 Ω
Applications
Features
Description
Ordering Information
Pin Configuration
• Industrial Controls
• Motor Control
• Robotics
• Medical Equipment—Patient/Equipment Isolation
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• IC Equipment
• Home Appliances
• Handle Load Currents Up to 2.5ADC/Arms
• 2500Vrms Input/Output Isolation
• Power SIP Package
• High Reliability
• No Moving Parts
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
Clare and IXYS have combined to bring OptoMOS®
technology, reliability, and compact size to a new
family of high-power, solid state relays. As part of
that family, the CPC1916 is a single-pole, normally
open (1-Form-A) solid state relay. The CPC1916
employs optically coupled MOSFET technology to
provide 2500Vrms of input to output isolation. The
efficient MOSFET switches and photovoltaic die
use Clare’s patented OptoMOS architecture, while
the output is controlled by a highly efficient GaAlAs
infrared LED. The combination of low on-resistance
and high load-current handling capabilities makes
the relay suitable for a variety of high-performance
switching applications.
Switching Characteristics
of Normally Open Devices
Approvals
• UL 508 Certified Component: File E69938
1
-
2
+
34
Form-A
IF
ILOAD
10%
90%
ton toff
www.clare.com
2R05
CPC1916
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Absolute Maximum Ratings @ 25ºC
Parameter Ratings Units
Blocking Voltage 100 VP
Reverse Input Voltage 5 V
Input control Current 50 mA
Peak (10ms) 1 A
Input Power Dissipation 1150 mW
Isolation Voltage, Input to Output 2500 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 3.33 mW / ºC
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current, Continuous Free air IL- - 2.5 ADC/Arms
Peak Load Current t < 10ms ILPK --6
AP
On-Resistance 1IL=1A RON - - 0.34 Ω
Off-State Leakage Current VL=100VPILEAK --1µA
Switching Speeds
Turn-On IF=10mA, VL=10V ton --5
ms
Turn-Off toff --3
Input Characteristics
Input Control Current IL=1A IF- 3.3 10 mA
Input Dropout Current - IF0.3 - - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Current VR=5V IR- - 10 µA
Common Characteristics
Capacitance, Input/Output - - - 2 - pF
1 Measurement taken within 1 second of on-time.
Electrical Characteristics @ 25ºC
Parameter Conditions Symbol Min Typ Max Units
Thermal Resistance (junction to case) - RθJC - 1.5 - °C/W
Thermal Characteristics
CPC1916
www.clare.com 3
R05
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
45
40
35
30
25
20
15
10
5
01.250 1.254 1.258 1.262 1.266
LED Forward Voltage (V)
Device Count (N)
Typical LED Forward Voltage Drop
(N=50, IF=10mA, TA=25ºC)
3.5 4.5 5.53.0 4.0 5.0
Turn-On (ms)
Device Count (N)
25
20
15
10
5
0
Typical Turn-On Time
(N=50, IF=10mA, IL=5mADC, TA=25ºC)
0.073 0.079 0.0850.070 0.076 0.082
Turn-Off (ms)
Device Count (N)
25
20
15
10
5
0
0.088
Typical Turn-Off Time
(N=50, IF=10mA, IL=5mADC, TA=25ºC)
35
30
25
20
15
10
5
0
0.212 0.216 0.220 0.2280.224 0.232
Device Count (N)
On-Resistance (Ω)
Typical On-Resistance Distribution
(N=50, IF=10mA, IL=1.0ADC, TA=25ºC)
35
30
25
20
15
10
5
0
119.1 119.6 120.0 120.6 121.1 121.6
Blocking Voltage (VP)
Device Count (N)
122.1
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
Typical LED Forward Voltage Drop
vs. Temperature
LED Forward Voltage Drop (V)
Temperature (ºC)
1.8
1.6
1.4
1.2
1.0
0.8
-40 -20 0 20 40 60 80 120100
I
F
=50mA
I
F
=20mA
I
F
=10mA
Typical Turn-On
vs. LED Forward Current
(IL=100mADC)
LED Forward Current (mA)
Turn-On (ms)
05 1015202530354045
6.0
5.4
4.8
4.2
3.6
3.0
2.4
1.8
1.2
0.6
0
50
Typical Turn-Off
vs. LED Forward Current
(IL=100mADC)
LED Forward Current (mA)
Turn-Off (ms)
05 1015202530354045
0.11
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
50
Typical IF for Switch Operation
vs. Temperature
(IL=100mADC)
LED Current (mA)
-40
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
Temperature (ºC)
Typical Turn-On vs. Temperature
(IL=100mADC)
Turn-On (ms)
-40
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
IF=10mA
IF=20mA
Temperature (ºC)
Typical Turn-Off vs. Temperature
(IL=100mADC)
Turn-Off (ms)
-40
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
-20 0 20 40 60 80 100
IF=10mA
IF=20mA
Temperature (ºC)
www.clare.com
4R05
CPC1916
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
Load Voltage (V)
Load Current (A)
-0.6 -0.4 -0.2 0.2 0.4
00.6
2.5
2.0
1.5
1.0
0.5
0
-0.5
-1.0
-1.5
-2.0
-2.5
Typical Load Current vs. Load Voltage
(IF=10mA, TA=25ºC) Typical Load Current vs. Temperature
Load Current (ADC/Arms)
Temperature (ºC)
-40 -20 0 20 40 60 80 120100
I
F
=20mA
I
F
=10mA
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
Typical Blocking Voltage
vs. Temperature
Blocking Voltage (VP)
-40
131
129
127
125
123
121
119
117
115
-20 0 20 40 60 80 100
Temperature (ºC)
Typical Leakage vs. Temperature at
Measured across Pins 3 & 4
(VL=100V)
-40
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0
-20 0 20 40 60 80 100
Temperature (ºC)
Leakage (μA)
Time
10μs 100μs 1ms 10ms 100ms 1s 10s 100s
Load Currrent (A)
2
3
4
5
6
7
Energy Rating Curve
(Free Air, No Heat Sink)
Typical On-Resistance vs. Temperature
(IF=10mA, IL=1.0ADC)
-40
0.36
0.32
0.28
0.24
0.20
0.16
0.12
0.08
0.04
0
-20 0 20 40 60 80 100
On-Resistance (Ω)
Temperature (ºC)
CPC1916
www.clare.com 5
R05
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all
of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry
standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to
the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled
according to the limitations and information in that standard as well as to any limitations set forth in the information or
standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
CPC1916Y MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
CPC1916Y 245ºC for 30 seconds
Board Wash
Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is
acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated
products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes.
Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy
should not be used.
RoHS
2002/95/EC e3
Pb
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1916-R05
©Copyright 2010, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
11/17/2010
For additional information please visit our website at: www.clare.com
CPC1916
6
MECHANICAL DIMENSIONS
Dimensions
mm
(inches)
1.150 DIA. x4
(0.045 DIA. x4)
2.540
(0.100)
Pin 1
10.160
(0.400)
5.080
(0.200)
1.75
(0.069)
10.160±0.127
(0.400±0.005)
21.082±0.381
(0.830±0.015)
4.572±0.127
(0.180±0.005)
1.016±0.127
(0.040±0.005)
10.160±0.127
(0.400±0.005)
1.778
(0.070)
5.080±0.127
(0.200±0.005)
2.540±0.127
(0.100±0.005)
0.762±0.076
(0.030±0.003) 1.651±0.102
(0.065±0.004)
7º TYP
4 Places
7º TYP
4 Places
3.302±0.051
(0.130±0.002)
0.381±0.013
(0.015±0.0005)
1.778
(0.070)
PCB Hole Pattern
CPC1916Y
