FP483P5060UH(S) 60W RF GaN Power Transistor Features * Up to 3.5 GHz Operation * 13 dB Small Signal Gain at 3.55 GHz * 60W Typical Psat * 55 % Efficiency at Psat * 48 V Operation Applications * Broadband Amplifiers * Cellular Infrastructure * Test Instrumentation * WiMAX, LTE, WCDMA, GSM * Radar application Absolute Maximum Ratings Parameter Symbol Rating Units Conditions Drain-Source Voltage VDSS 160 Volts 25C Gate-to-Source Voltage3 VGS -10, +2 Volts 25C Storage Temperature3 T STG -65, +150 C Operating Junction Temperature1,3 TJ 225 C Maximum Forward Gate Current3 IGMAX 30 mA 25C Maximum Drain Current2 IDMAX 1 A Id@ Vd =10V, Vg= 1V Soldering Temperature3 TS 245 C Storage Temperature3 T STG -65, +150 C Note: Continuous use at maximum temperature will affect MTTF. Current limit for long term, reliable operation After additional updates All Rights Reserved, Copright(c) FERARF Ltd. www.ferarf.com 1 Disclaimer: Subject to change without notice Rev.2.0 Jan./2018 2018.05.25-11:13 DC Characteristics1 (TC = 25C ) Parameter Symbol Units Conditions Gate Threshold Voltage VGS(th) -3.1 VDC VDS = 10 V, ID = 1 mA Gate Quiescent Voltage V GS(Q) -2.8 VDC VDS = 48 V, ID = 100 mA Saturated Drain Current2 IDS 1000 mA/mm VDS = 10 V, VGS = 1 V Drain-Source Breakdown Voltage VBR VDC ID = 1 mA/mm TYP MIN MAX 160 Note: Measured on wafer prior to packaging. Scaled from PCM data. RF Characteristics (TC = 25C, F0 = 3.55 GHz unless otherwise noted) Parameter Symbol Power Gain GSS OutputPower MIN Units Conditions TBD dB VDD = 4 8 V, IDQ = 100 mA, Pulse Width = 100 usec, Duty Cycle = 10% POUT TBD W VDD = 4 8 V, IDQ = 100 mA, Pulse Width = 100 usec, Duty Cycle = 10% Saturated Output Power P SAT 60 W VDD = 4 8 V, IDQ = 100 mA, Pulse Width = 100 usec, Duty Cycle = 10% Pulsed Drain Efficiency1 55 % VDD = 4 8 V, IDQ = 100 mA, Pulse Width = 100 usec, Duty Cycle = 10% @ Psat Output Mismatch Stress VSWR - TYP - MAX 10:1 No damage at all phase angles, VDD = 48 V, IDQ = 100 mA, POUT = 1 W CW Note: 1. Drain Efficiency = POUT / PDC All Rights Reserved, Copright(c) FERARF Ltd. Disclaimer: Subject to change without notice Rev.2.0 Jan./2018 2 www.ferarf.com Partnumbercode F P 48 3P5 060 U H S (Surface), H (Screw Hole) M (Matched), U (Unmatched) Power (Watt) Frequency (GHz) Drain Voltage (DC) All Rights Reserved, Copright(c) FERARF Ltd. Disclaimer: Subject to change without notice Rev.2.0 Jan./2018 3 www.ferarf.com Disclaimer Information furnished by FeraRF Ltd. is believed to be accurate and reliable. However, no responsibility is assumed by FeraRF Ltd. for its use, nor for any infringements of patents or other rights of third parties that may result from its use. The information contained is provided "as it is" and with all defects, and the whole risk associated with such information is entirely with the user. Specifications subject to change without notice. FeraRF Ltd. and registered trademarks are the property of their respective owners. Customers must search and verify the updated information before placing orders for our products. We makes no guarantee or representation regarding the information contained herein the useing of products for any specific purpose. FeraRF Ltd. products are not warranted or authorized for use as key components in conditions, or other applications where a failure would be expected to cause severe personal injury or death. If you have question, please leave detailed message below. We will respond to your inquiry soon after a careful review * Website : http://ferarf.com/contact/ * E-mail : ferax@ferarf.com All Rights Reserved, Copright(c) FERARF Ltd. Disclaimer: Subject to change without notice Rev.2.0 Jan./2018 4 www.ferarf.com