PATENT NUMBERS
5713755
5961339
DO NOT
SCALE FROM
THIS PRINT
CLE-1XX-XX-X-DV-XX
No OF POSITIONS
-04 THRU -90
(PER ROW)
ROW SPECIFICATION
-D: DOUBLE ROW - VERTICAL
(USE CLE-90-D)
LEAD STYLE
-01
(USE C-80-01-X)
PLATING SPECIFICATION
-F: 3µ" FLASH SELECTIVE GOLD
ON ENTIRE
CONTACT
-G: 10µ" LIGHT GOLD ON ENTIRE
CONTACT
OPTION
-P: PICK & PLACE PAD (SEE FIG 2, SHT 2)
(AVAILABLE ON POSITIONS -08 THRU -90 ONLY))
(USE LMP-10)
-TR: TAPE & REEL PACKAGING
-A: ALIGNMENT PIN (SEE FIG 3 & 4, SHT 2)
(MOLDED TO POSITION OR STAKED)
(SAMTEC DISCRETION WHICH -A PIN IS USED)
(STAKE 7 POSITIONS MIN)
(MOLD 4 POSITION MIN)
-K: POLYIMIDE FILM PAD
(AVAILABLE ON POS. 8 THRU 90 ONLY)
(.005 [.13] THICKNESS WITH SILICONE
ADHESIVE)(SEE FIG 5, SHT 2)
(USE K-500-300)
AT
.123
REF
3.12 .130
-
.001
+
.004 3.30
-
0.03
+
0.10
CLE-90-D
CLE-80-01-X
FIG 1
SEE NOTE 8
(SEE NOTE 1 & 4)
(No OF POSITIONS x .0315[.800] +.005[.13])
.010[.25]
.125
REF
3.18
.021
REF
0.53 .0315
REF
0.800
.0472
REF
1.199
2
MAX SWAY
(ANY DIRECTION)
"A"
"A"
'B'
01
02100
99
C
1
C
2
.012
x .007[.18] REF (TYP)
0.30
.191 4.86
90°
±3°
SECTION "A"-"A"
SEE NOTE 6
.004[.10]
POS. 04-65
.006[.15]
POS. 66-90
DETAIL 'B'
SCALE 10 : 1
END WALLS TO BE
SYMMETRICAL
.0050
TUBE ALL POSITIONS
AT
TUBE
PLUG
PT-1-24-01-62
TP-12
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.8MM x 1.2MM C.L. SOCKET STRIP ASSEMBLY
BY:
CLE-1XX-XX-X-DV-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
PURVIS
10/23/95
2
1
SHEET SCALE: 5:1
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
CONTACT: BeCu 190 ALLOY [TM04]
THICKNESS: .007[.18]REF
F:\DWG\MISC\MKTG\CLE-1XX-XX-X-DV-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. NOTE DELETED.
3
. MINIMUM PUSHOUT FORCE: .5 LB.
4. WILL LOSE TWO POSITIONS FOR EVERY CUT MADE. MAXIMUM CUT FLASH
TO BE .010 [.25] WITH NO FLASH IN HOLES OR EXTENDING BELOW LEADS.
5. NOTE DELETED.
6. BURR ALLOWANCE: .003 [.08] MAX
7. ENDWALL AFTER CUTTING: .0115±.0025 [.292±.064]
8. VOIDS ON TOP SURFACE TO BE LOCATED AT VENDOR DISCRETION
TO CONTROL PART WARPAGE.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
C
REVISION AT
.123 3.12
REF
[P=((M -.225) / 2)]
.015
.225
REF
5.72
"M"
.130 3.30
LMP-10
C
4
AT
.125
REF
3.18
.138 3.51
.173 4.39
(SEE NOTE)
"S"
.1575
±.0050
4.000
±0.127
.016
±.010
0.41
±0.25
(SEE NOTE)
"R"
C
L
NOTE: "R" = USED MEASURED DIMENSION (REF)
"S" = [( "R" - .1575 [4.00]) / 2]
.020[.51]
FIG 5
-K: POLYIMIDE FILM PAD
8 POSITIONS MIN
SM-A7H FOR STAKED VERSION
.135 3.43
(No. OF POS. - 2) x .0315[.800]
-A: ALIGNMENT PIN OPTION
FIG 3
-A STAKED OPTION
7 POSITIONS MIN
C
3
.028
REF
0.71
.025
0.64
.007 0.18
C
L
(No. OF POS. - 2) x .0315[.800]
FIG 4
-A OPTION (MOLDED)
4 POSITIONS MIN
.035 0.89
.028
(TYP)
0.71
.025
REF
0.64
.007 0.18
FULL RADIUS
CLE-90-D-XX
FIG 2
-P OPTION
8 POSITIONS MIN
SHEET OF
BY:
CLE-1XX-XX-X-DV-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
PURVIS
10/23/95
2
2
SHEET SCALE: 5:1
REVISION AT
F:\DWG\MISC\MKTG\CLE-1XX-XX-X-DV-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.8MM x 1.2MM C.L. SOCKET STRIP ASSEMBLY
