1
Interface RF Connector with Switch
MS-151C Series
NEW
2006.2
■Features
1. Confirmation of complete connection
Built-in interlock feature confirms fully mated condition
with a “click” sensation.
2. Non-directional connection
The connector can be mated in any position on a 360°
axis and can rotate within the same when in use,
allowing routing of the connected cable in any direction.
3. High durability
Guaranteed 5000 insertion/removal cycles.
4. Space-saving
The external dimensions of the board-mounted
receptacle (7.3mm high, 7.9mm wide and 8.45mm deep)
make it ideal for use in small devices.
5. Ease of connection and handling
Over-molded plug, with convenient grip and built-in cable
strain relief assures reliable mating/un-mating by the end
user.
6. Designed for board placement with
automatic equipment
Top surface of receptacle assembly is flat, allowing
reliable hold for vacuum nozzles of automatic placement
equipment.
7. RoHS compliant
All components and materials comply with EU Directive
2002/95/EC, with respect to all applicable substances.
■Applications
GPS terminals, wireless LAN modules, desktop and
notebook computers, PDA’s, high frequency equipment and
other applications requiring re-direction of the transmission.
■Overview
Designed for end user applications requiring re-
direction of the transmission.
Small size, lightweight and high reliability make it
ideal for use in wireless applications requiring
bandwidth of up to 6GHz.
MS151P-HRMJ-1
●
SMA Conversion Adapter
For Receptacle: MS-151C
MS151J-HRMJ
●
SMA Conversion Adapter
For Plug: MS-151-C(BP)
MS-151C
MS-151-C(BP)
Plug can be rotated after full insertion.
●Receptacle
●Plug
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2
■Product Specifications
100 mA
100 V DC
100 V AC / 1 minute
Frequency : 10 to 500 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 directions
Acceleration of 490 m/s2, 6 ms duration, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature :
–55ç/+5çto +35ç/+85ç/+5çto +35ç
Time : 30
/
5
/
30
/
5 (Minutes)
100 cycles
96 hours at 40ç, humidity of 90% to 95%
5% salt water solution, 48 hours
With corresponding connector (Initial value)
5000 cycles
50 mømax.
1000 Mømin.
No flashover or insulation breakdown
No electrical discontinuity of 10 µs or more
No electrical discontinuity of 10 µs or more
Contact resistance: 100 mømax.
Insulation resistance: 10 Mømin.
Contact resistance: 100 mømax.
Insulation resistance: 10 Mømin.
Contact resistance: 100 mømax.
No excessive corrosions
Mating : 1 to 10N
Un-mating : 3 to 15N
Contact resistance: 100 mømax.
1. Contact resistance
2. Insulation resistance
3. Withstanding voltage
4. Vibration
5. Shock
6. Temperature cycle
7. Humidity
7.(Steady state)
8. Salt spray
9.
Mating/un-mating forces
10. Durability
(insertion/ withdrawal)
Item Specification Conditions
Frequency range
Operating temperature range
Power rating
V.S.W.R.
Insertion loss
Isolation loss
DC to 6GHz
–40çto +85ç
4W
1DC to 2 GHz
2 GHz to 4 GHz
4 GHz to 5 GHz
5 GHz to 6 GHz
1DC to 2 GHz
2 GHz to 4 GHz
4 GHz to 5 GHz
5 GHz to 6 GHz
1DC to 2 GHz
2 GHz to 4 GHz
4 GHz to 6 GHz
1.2dBmax.
1.3dBmax.
1.7dBmax.
1.3dBmax.
1.5dBmax.
1.7dBmax.
0.4dBdBmax.
0.5dBdBmax.
1.0dBdBmax.
--------------
--------------
--------------
0.4dBdBmax.
0.6dBdBmax.
0.8dBdBmax.
18dBdBmin.
14dBdBmin.
12dBdBmin.
Not mated with the plug Open (Mated with MS-151-C(BP))
■Materials
Receptacle
Insulator Polyamide (UL94V-0) ---------------
Lock mating section Stainless steel Gold plated
Outer conductor Phosphor bronze Gold plated
Contact A Phosphor bronze Gold plated
Contact C Beryllium copper Gold plated
Part Material Finish
Plug
Ring Stainless steel Nickel plated
Outer conductor Phosphor bronze Nickel plated
Inner contact Phosphor bronze Gold plated
Insulator PTFE ---------------
Ferrule Phosphor bronze ---------------
Bushing TPEE-M ---------------
Part Material Finish
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3
BHigh Frequency Characteristics (Typical)
●NORMALLY CLOSED(N.C) ~ (Not mated with the plug)
0.0
0.5
1.0
1.5
1.8
1.6
1.4
1.2
1.0
0123 [GHz]
V.S.W.R.
Insertion Loss
456
V.S.W.R.
INSERTION LOSS
[dB]
: V.S.W.R. SPEC
: INSERTION LOSS SPEC
: ISOLATION SPEC
0.0
0.5
1.0
1.5
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0123 [GHz]
[dB]
V.S.W.R.
Insertion Loss
456
V.S.W.R.
INSERTION LOSS
●OPEN(N.O) ~ (Mated with the plug)
0
5
10
15
20
25
30
35
40
45
50
0123 [GHz]
ISOLATION
[dB]
456
ISOLATION
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
4
■Receptacle
BPCB mounting pattern
BCircuit diagram
4.6 4-1.2
1.8
7.9
8.45
7
2.2
1.45
0.75
0.6
7.3
4.5
2-0.65
2-Ø0.9
2.2 2.2
2-0.8
6.5
4.3
2-0.3
2-0.25
1.8
3.6
MS–151C
G
G
B
Not mated with the plug (N.C)
G
A
C
G
G
G
B
G
A
C
G
Mated with the plug (N.O)
Plug MS-151C (Receptacle)
2.2
4.6
5.05 1.9
5.45
0.4
4.65 1.9
0.9
2-1.2
2.4
4-1.8
0.9
8.5
8.5
4.3
4.3
2.14
5
5.05
4-1.8
2-1.2
2.6
4.6
2-0.6
2-0.55 0.7
1.8
2.14
5.1
6.9
0.9
3.6
2-0.6
2-0.55 0.7
1.8
3.6
2-Ø1(Through hole)
No resist
Recommended metal mask thickness: 0.15mm
Part Number CL No. Packaging
MS-151C 358-0211-8 800 pieces per reel
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
5
BPackaging Specifications
BRecommended Temperature Profile
MS–151C
MS–151C
12 4
7.5
16
(Ø80)
Ø380
(9.1)
(0.5)
1.75
2
16.4
Ø1.5
Ø13
Ø21
Unreeling direction
Unreeling direction
Reel dimensions Embossed tape reel packaging
(800 pieces/reel)
22.4 max.
90~120sec. 40sec. Max.
Time (Second)
Temperature(ç)
260
230
180
150
100
50
0
10sec. Max.
Lead-free Solder Paste
Maximum temperature
Duration of peak temperature
Peak temperature
230ç min
150ç to 180ç
: 260ç
:10 sec. max.
: 240ç to 255ç
: 40 sec. max.
: 90 to 120 sec.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
6
■Plug
●For Receptacle: MS-151C
Part Number
MS-151-C(BP)
CL No.
358-0219-0
Applicable cable RoHSPackaging
1.5DS-QEHV(TA) YES1
■SMA Conversion adapters
Part Number
MS151P-HRMJ-1
CL No.
355-0090-6
Packaging
1
●For Plug: MS-151-C(BP)
Part Number
MS151J-HRMJ
CL No.
355-0088-4
Packaging
1
RoHS
YES
RoHS
YES
* Supplied by HRS only as a terminated cable assembly.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
7
■Applications
●Wireless LAN IEEE802.11a/b/g
wireless LAN AP
D/T PC
Digital Home
BDesktop PC with inner antenna for wireless LAN
MS-151C
MS-151-C(BP)
Inner antenna
Outer antenna
for wireless LAN
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.