10/2013
ADA10000
1 GHz CATV Amplier
Data Sheet - Rev 2.8
S3 Package
Figure 1: Block Diagram
FEATURES
• 15 dB Gain
• Wide Bandwidth: 50 MHz to 1 GHz
• High Linearity : +64 dBmV IIP3 (+8 V supply)
• Low Distortion
• Low Noise Figure: 2.0 dB
• Single +4 V to +8 V Supply
• SOIC-16 and SOT-89 Package Options
• RoHS Compliant Package
The ADA10000 is a monolithic IC intended for use in
applications requiring high linearity, such as Cellular
Telephone Base Station Driver Ampliers, CATV Fiber
Receiver and Distribution Ampliers, and CATV Drop
Ampliers. Offered in both a modied 16 lead SOIC
package and SOT-89 package, it is well suited for use
in ampliers where small size, reduced component
count, and high reliability are important.
S24 Package
RF Output
/Bias
RF Input
A
• CATV Drop Amplier
• Low noise amplier for CATV Set-Top Boxes
• Home gateways
• Post Amp for RF overlay in FTTH/RFOG ONUs
2Data Sheet - Rev 2.8
10/2013
ADA10000
1
2
GND
RF
OUT
GND
GND
GND
GND
8
7
6
5
4
3
16
15
9
10
11
12
13
14
RF
IN
GND
GND
GND
GND
GND
GND
GND
GND
GND
1GND Ground 16 GND Ground
2GND Ground 15 GND Ground
3GND Ground 14 RF
OUT
RF Output / Bias
4GND Ground 13 GND Ground
5GND Ground 12 GND Ground
6RF
IN
RF Input 11 GND Ground
7GND Ground 10 GND Ground
8GND Ground 9GND Ground
3Data Sheet - Rev 2.8
10/2013
ADA10000
2 31
4
RF
IN
RF
OUT
GND
GND
1RF
IN
RF Input
2GND Ground
3RF
OUT
RF Output / Bias
4GND Ground
4Data Sheet - Rev 2.8
10/2013
ADA10000
Notes:
(1) RF input pin must be AC-coupled. No DC external bias should be applied.
Notes:
(1) Median time to failure will degrade above this temperature.
PARAMETER TYP MAX
RF Input / Output Frequency 50 -1000 MHz
Supply Voltage (VDD)+4 +8 +9 VDC
Case Temperature -40 -+85
(1)
°C
PARAMETERMINMAXUNIT
Supply
(S3 package: pin 14)
(S24 package: pin 3)
0+12 VDC
RF Power at Input
(1)
(S3 package: pin 6)
(S24 package: pin 1)
-+59 dBmV
Storage Te mperature-65 +150 °C
5Data Sheet - Rev 2.8
10/2013
ADA10000
(TADDΩ
Notes:
(1) 160 channels, +17 dBmV per channel (measured at input), 6 MHz channel spacing.
(2) 80 channels, +19 dBmV per channel (measured at input), 6 MHz channel spacing.
(3) Two tones, -39 dBmV per tone at input.
(4) The device can be operated at reduced supply voltages from 4 V to 8 V for lower power dissipation. Refer to Figures
7, 8, 13, and 16 for performance variation with supply voltage.
PARAMETERMINTYPMAXUNIT COMMENT
CSO
(1)
/ CSO
(2)
60 / 62 --dBc
CTB
(1)
/ CTB
(2)
65 / 74 --dBc
Gain 14 15 -dB
Noise Figure -2.0 3.5dB
2nd Order Input Intercept Point
(IIP 2)
(3)
+77+83 -dBmV
3rd Order Input Intercept Point
(IIP 3)
(3)
+61+64 -dBmV
Thermal Resistance -
-
-
-
35
20 °C/W S3 package
S24 package
Current Consumption
(4)
50 -150 mA
6Data Sheet - Rev 2.8
10/2013
ADA10000
Ω
1000 pF
1000 pF
0.1 uF
RF
IN
RF
OUT
5.6 nH
V
DD
3.9 uH
ADA10000
0.5 pF
1000 pF 180 pF
0.5 pF
0.01 uF
RF
IN
RF
OUT
ADA10000
13
2,4
10 nH
100 50
V
DD
820 nH
Ω
7Data Sheet - Rev 2.8
10/2013
ADA10000
Refer to the ANADIGICS web site for full 2-port s-parameter data.
As measured in test circuits shown in Figures 4 and 5.
12
13
14
15
16
17
18
0 200 400 600 800 1000
Frequency (MHz)
Ga in (dB)
1.0
1.5
2.0
2.5
3.0
3.5
4.0
No is e F igur e ( dB )
Gai n
NF
(TA = +25 8DDV
(TA = +25 8V
15.0
15.2
15.4
15.6
15.8
16.0
4 5 6 7 8 9
Supply Voltage (V )
Ga in (dB)
1.7
1.8
1.9
2.0
2.1
2.2
No is e F igur e ( dB )
Gain
NF
(TA = +25 8V
Notes:
(1) IIP2 measure at 986.5 MHz; Input = two tones at 55.25 MHz and 931.25
MHz at +39 dBmV.
(2) IIP3 measured with two tones at the input: 986.5 MHz and 992.5 MHz at
+39 dBmV.
(TA = +25 8
V
(TA = +25 8DDV
50 MHz
1 GHz
(TA = +25 8DDV
50 MHz
1 GHz
54
59
64
69
74
79
84
89
456789
SupplyVoltage(V)
IIP2, IIP 3(dB mV)
IIP 2
IIP 3
63
65
67
69
71
73
75
58 60
Input Power (dBmV)
Ou tput Power(dB mV)
48 50 52 54 56
8Data Sheet - Rev 2.8
10/2013
ADA10000
(TA = +25 8V
(TA = +25 8V
(TA = +25 8DDV
-40
-35
-30
-25
-20
-15
-10
-5
0
0 200 400 600 80 0 1 00 0
Frequency (MHz)
Inpu t R eturn Los s ( dB )
(TA = +25 8DDV
-40
-35
-30
-25
-20
-15
-10
-5
0
0 2 00 400 600 800 100 0
Frequency (MHz)
Ou tput Re turn Los s ( dB )
(TA = +25 8V
Notes:
(1) IIP2 measure at 986.5 MHz; Input = two tones at 55.25 MHz and 931.25
MHz at +39 dBmV.
(2) IIP3 measured with two tones at the input: 986.5 MHz and 992.5 MHz at
+39 dBmV.
(TA = +25 8V
11.00
12.00
13.00
14.00
15.00
16.00
17.00
0100 200 300 400 500 600 700 800 900
1000
Gain (dB)
Frequency (MHz)
( TA= +25oC, 75 ohm system )
1.00
1.50
2.00
2.50
3.00
3.50
4.00
4.50
0100 200 300 400 500 600 700 800 900
1000
N F ( d B )
Frequency (MHz)
( TA= +25oC, 75 ohm system )
54
59
64
69
74
79
84
89
456789
SupplyVoltage (V)
IIP2,IIP3(dBmV)
IIP2
IIP3
63
65
67
69
71
73
75
59 61
InputPower (dBmV)
Output Power(dBmV)
49 51 53 55 57
9Data Sheet - Rev 2.8
10/2013
ADA10000
Refer to the ANADIGICS web site for full 2-port s-parameter data.
(TA = +25 8DDV
1 GHz
50 MHz
(TA = +25 8DDV
1 G Hz
50 MHz
10 Data Sheet - Rev 2.8
10/2013
ADA10000
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0100 200 300 400 500
600
CTB (dBc)
( 80 Flat NTSC Channels; VDD = +8V; TA= +25oC )
-100
-95
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0100 200 300 400 500 600
CSO(dBc)
Frequency (MHz)
( 80 Flat NTSC Channels; VDD = +8V; TA= +25oC )
-80
-75
-70
-65
-60
-55
-50
-45
-40
-35
0100 200 300 400 500 600
XMOD (dBc)
Frequency (MHz)
( 80 Flat NTSC Channels; VDD = +8V; TA= +25oC )
DD
TA = +25 8
-90
-85
-80
-75
-70
-65
-60
0100 200 300 400 500
600
CTB (dBc)
Frequency (MHz)
( 80 Flat NTSC Channels; Pout = +30dBmV/Ch )
-100
-90
-80
-70
-60
-50
-40
0100 200 300 400 500
600
CSO (dBc)
Frequency (MHz)
( 80 Flat NTSC Channels; Pout = +30dBmV/Ch )
-75
-70
-65
-60
-55
-50
0100 200 300 400 500 600
XMOD (dBc)
Frequency (MHz)
( 80 Flat NTSC Channels; Pout = +30dBmV/Ch )
DD
TA = +25 8
DD
TA = +25 8
11 Data Sheet - Rev 2.8
10/2013
ADA10000
-85
-80
-75
-70
-65
-60
-55
0100 200 300 400 500 600 700 800
CTB (dBc)
Frequency (MHz)
( 110 Flat NTSC Channels; Pout = +30dBmV/Ch )
-100
-90
-80
-70
-60
-50
-40
0100 200 300 400 500 600 700
800
CSO (dBc)
Frequency (MHz)
( 110 Flat NTSC Channels; Pout = +30dBmV/Ch )
-75
-70
-65
-60
-55
-50
0100 200 300 400 500 600 700 800
XMOD (dBc)
Frequency (MHz)
( 110 Flat NTSC Channels; Pout = +30dBmV/Ch )
8
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0100 200 300 400 500 600 700
800
CTB (dBc)
Frequency (MHz)
( 110 Flat NTSC Channels; VDD = +8V; TA= +25oC )
8
8
-100
-95
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
0100 200 300 400 500 600 700 800
CSO (dBc)
Frequency (MHz)
( 110 Flat NTSC Channels; VDD = +8V; TA= +25oC )
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
-35
0100 200 300 400 500 600 700 800
XMOD (dBc)
Frequency (MHz)
( 110 Flat NTSC Channels; V
DD
= +8V; T
A
= +25oC )
12 Data Sheet - Rev 2.8
10/2013
ADA10000
-100
-90
-80
-70
-60
-50
-40
0100 200 300 400 500 600 700 800 900
1000
CSO (dBc)
Frequency (MHz)
( 132 Flat NTSC Channels; Pout = +30dBmV/Ch )
8
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
-35
0100 200 300 400 500 600 700 800 900 1000
CTB (dBc)
Frequency (MHz)
( 132 Flat NTSC Channels; VDD = +8V; TA= +25oC )
8
-100
-95
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
-35
0100 200 300 400 500 600 700 800 900
1000
CSO(dBc)
Frequency (MHz)
( 132 Flat NTSC Channels; VDD = +8V; TA= +25oC )
8
-75
-70
-65
-60
-55
-50
-45
-40
-35
0100 200 300 400 500 600 700 800 900 1000
XMOD (dBC)
Frequency (MHz)
( 132 Flat NTSC Channels; VDD = +8V; TA= +25oC )
-75
-70
-65
-60
-55
-50
0100 200 300 400 500 600 700 800 900 1000
XMOD (dBc)
Frequency (MHz)
( 132 Flat NTSC Channels; Pout = +30dBmV/Ch )
-85
-80
-75
-70
-65
-60
-55
0100 200 300 400 500 600 700 800 900 1000
CTB (dBc)
Frequency (MHz)
( 132 Flat NTSC Channels; Pout = +30dBmV/Ch )
13 Data Sheet - Rev 2.8
10/2013
ADA10000
-85
-80
-75
-70
-65
-60
-55
-50
0100 200 300 400 500 600 700 800 900
1000
CTB(dBc)
Frequency (MHz)
( 155 Flat NTSC Channels; Pout = +30dBmV/Ch )
-100
-90
-80
-70
-60
-50
-40
0100 200 300 400 500 600 700 800 900
1000
CSO (dBc)
Frequency (MHz)
( 155 Flat NTSC Channels; Pout = +30dBmV/Ch )
-75
-70
-65
-60
-55
-50
0100 200 300 400 500 600 700 800 900
1000
XMOD (dBc)
Frequency (MHz)
( 155 Flat NTSC Channels; Pout = +30dBmV/Ch )
14 Data Sheet - Rev 2.8
10/2013
ADA10000
72.3
72.4
72.5
72.6
0 200 400 600 800 1000
Frequency (MHz)
P1dB (dBmV)
15 Data Sheet - Rev 2.8
10/2013
ADA10000
16 Data Sheet - Rev 2.8
10/2013
ADA10000
0.5 pF
1000 pF
0.5 pF
0.01 uF
RF IN RF OUT
ADA10000
1 3
2,4
10 nH
100 50
VDD
6.8 H
1000 pF
Ω
17 Data Sheet - Rev 2.8
10/2013
ADA10000
Package (TA = +258V
(TA = +258V
(TA = +258
V
Package
(TA = +258
V
(TA = +25 8
V
-60
-55
-50
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
025 50 75 100 125 150 175 200
S24 Package
(TA= +25oDD
13
13.5
14
14.5
15
15.5
16
16.5
17
025 50 75 100 125 150 175 200
S24 Package
(T
A
= +25
o
DD
-30
-25
-20
-15
-10
-5
0
025 50 75 100 125 150 175 200 225
250
S24 Package
(TA= +25oDD
0
1
2
3
4
5
6
7
8
9
10
510 15 20 25 30
(TA= +25oDD
-50
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
025 50 75 100 125 150 175
200
S24 Package
(TA= +25oDD
18 Data Sheet - Rev 2.8
10/2013
ADA10000
HE
eB1
A
B
A2
L
a
C
LE
0.003 [0.076mm]
A1
GAUGE PLANE
SEATING PLANE
D
0.015 [0.38]X45
a
L
e
E
A
D
B
L
S
O
Y
B
M
MILLIMETERSINCHES NOTE
MAX.MIN.MAX.MIN.
H
LE
C
2
3
4
1
B
0.020 0.500.330.013
0.10
1.47
0.25
1.730.068
0.010
0.058
0.004
0.055 0.065 1.651.40
0.250.200.0100.008
8080
6.205.740.2440.226
0.380
0.150
0.400
0.160 4.06
10.16
3.81
9.66
0.050 BSC 1.27 BSC
0.016 0.040 0.41 1.02
0.030 0.76
0.062 1.58 1.780.070
4. LEAD THICKNESS AFTER PLATING TO BE 0.013 [0.33mm]
MAXIMUM.
PER SIDE.
1. CONTROLLING DIMENSION: INCHES
2. DIMENSION "D" DOES NOT INCLUDE MOLD FLASH,
PROTRUSIONS OR GATE BURRS. MOLD FLASH, PROTRUSIONS
AND GATE BURRS SHALL NOT EXCEED 0.006 [0.15mm]
3. DIMENSION "E" DOES NOT INCLUDE INTERLEADFLASH OR
PROTRUSIONS. INTERLEADFLASH AND PROTRUSIONS
SHALL NOT EXCEED 0.010 [0.25mm] PER SIDE.
NOTES:
A
2
A
1
19 Data Sheet - Rev 2.8
10/2013
ADA10000
WARNING
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product
in any such application without written consent is prohibited.
IMPORTANT NOTICE
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice.
The product specications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to
change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed
to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers
to verify that the information they are using is current before placing orders.
Data Sheet - Rev 2.8
10/2013
20
ADA10000
TEMPERATURE
ADA10000RS3P1 -40 °C to +85 °C RoHS Compliant
Modified 16 Pin SOIC 3,500 piece Tape and Reel
ADA10000RS24Q1 -40 °C to +85 °C RoHS Compliant
SOT-89 Package 1,000 piece Tape and Reel
