B65
Staggered Connector Directly Mounted on Board
HIF2C Series
■Features
1. Directly Mounted on Board
This connector can be directly mounted on the board
using 1.27mm pitch flat cable.
2. Variation in Number of Contacts
The number of contacts contains 10, 16, 20, 26, 30, 34,
40, 50, and 60 contacts.
3. Low Profile Type
The connector height is lower than that of the HIF2E series.
4. Applicable Cable
The applicable cable is UL2651 AWG#28 flat cable (7
cores./0.127mm, jacket dia. :0.8 to 1.0mm).
Rating Current rating: 1A
Voltage rating: 200V AC
Operating Temperature Range:–55 to +85ç(Note 1)
Operating Moisture Range:40 to 80%
Storage Temperature Range:–10 to +60ç(Note 2)
Storage Humidity Range:40 to 70%(Note 2)
■Product Specifications
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
■Material
Part Material Finish Remarks
Insulator
Contact PBT
Beryllium copper Black UL94V-0
■Ordering Information
HIF2C - *DT - 1.27 R
1 2 43
Series Name: HIF 2C
Number of contacts: 10, 16, 20, 26, 30, 34, 40, 50, and 60
Contact alignment: DT : staggered
Contact Pitch: 1.27mm
Connection type : R : ribbon cable
1
2
3
■Applications
Computers, terminal equipment, PPC, various kinds of electronic equipment, business machines, etc.
---------------
Gold plated over nickel underplated
Contact area
5
4
5
500V DC
650V AC/1 minute
0.1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
Solder Bath: 260ç for 10 seconds
Manual soldering: 360ç for 5 seconds
(–65ç: 30 minutes ➝15 to 35ç: 5 minutes max.
125ç: 30 minutes ➝15 to 35ç: 5 minutes max.) 5 cycles
1000M ohms min.
No flashover or insulation breakdown.
15m ohms max.
No electrical discontinuity of 1μs or more
Insulation resistance: 1000M ohms min.
No deformation of components affecting performance.
No damage, cracks, or parts looseness.
1.
Insulation Resistance
2.
Withstanding voltage
3.
Contact Resistance
4. Vibration
5.
Humidity (Steady state)
7. Resistance to
Soldering heat
6.
Temperature Cycle
Item Specification Condition
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B66
HIF2C Series●Staggered Connector Directly Mounted on Board
Part Number CL No.
HIF2C-10DT-1.27R(01)
HIF2C-16DT-1.27R(01)
HIF2C-20DT-1.27R(01)
HIF2C-26DT-1.27R(01)
HIF2C-30DT-1.27R(01)
HIF2C-34DT-1.27R(01)
HIF2C-40DT-1.27R(01)
HIF2C-50DT-1.27R(01)
HIF2C-60DT-1.27R(01)
561-0075-0-01
561-0077-6-01
561-0079-1-01
561-0081-3-01
561-0083-9-01
561-0085-4-01
561-0087-0-01
561-0089-5-01
561-0091-7-01
Number of Contacts
10
16
20
26
30
34
40
50
60
A B RoHS
17.8
25.4
30.5
38.1
43.2
48.3
55.9
68.6
81.3
11.43
19.05
24.13
31.75
36.83
41.91
49.53
62.23
74.93
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B67
HIF2C Series●Staggered Connector Directly Mounted on Board
BPCB mounting pattern
10 contacts
30 contacts
26 contacts
20 contacts
16 contacts
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B68
HIF2C Series●Staggered Connector Directly Mounted on Board
BPCB mounting pattern
34 contacts
60 contacts
50 contacts
40 contacts
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
