Crimp 2.5mm THR CONNECTOR Wire-to-wire connectors - Matable with HR receptacles pitch Features ------------------------ * Both crimp style and insulation displacement receptacles can be used Both crimp style and insulation displacement HR connector receptacles can be accommodated by the THR connector. * Arm lock mechanism An arm lock mechanism securely holds the plug and the receptacle together when they are connected. Releasing the lock is easy. * Mountable on a variety of panels Due to our unique panel installation locking mechanisms, the housing can be easily installed on panels of various thickness without using tools. Specifications ------------------- * Current rating: Crimp style HR connectors type/3A AC, DC max. Insulation displacement HR connectors type/2A AC, DC max. * Voltage rating: 250V AC, DC max. * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/15m max. After environmental testing/25m max. * Insulation resistance: 500M min. * Withstanding voltage: 1,000V AC/minute * Applicable wire: Crimp style HR connectors type/AWG #26 to #22 0.13 to 0.33mm2 Insulation displacement HR connectors type/AWG #28, #26, #24 * Applicable panel thickness: 0.5 to 2.0mm * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. 1 THR CONNECTOR THR Connector ----------------------------------------------------------- Housing 1-N type Circuits 22.7 10.4 Model No. Dimensions (mm) A B Qty / bag BU03P-THR-1-K 5.0 11.6 200 BU06P-THR-1-K 12.5 19.1 100 BU12P-THR-1-K 27.5 34.1 50 1-1 type 3 BU03P-THR 6 BU06P-THR 12 BU12P-THR 6 1-N type Material and Finish 2.5 A B H J ST Housing: PA 66, UL94V-0 Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment) 2.95 RoHS compliance This product displays (LF)(SN) on a label. 4.0 7.8 1-1 type 6.0 B A 11.6 2.5 (10.4) (23.1) (10.8) Receptacle / Insulation displacement HR connector ---------------------------- Circuits 4.1 Model No. #28 #26 Dimensions (mm) #24 A B Qty / box 3 03HR-8M-P-N 03HR-6S-P-N 03HR-4K-P-N 5.0 10.0 1,000 6 06HR-8M-P-N 06HR-6S-P-N 06HR-4K-P-N 12.5 17.5 1,000 12 12HR-8M-P-N 12HR-6S-P-N 12HR-4K-P-N 27.5 32.5 500 10.3 Receptacle Material and Finish Contact: Phosphor bronze, tin-plated (reflow treatment) Housing: PA 66, UL94V-0 RoHS compliance 2.5 3.6 A B 2 2.5 THR CONNECTOR Receptacle / Crimp style HR connector --------------------------------------- Housing A 8.2 B 2.5 2.5 1.9 Contact 2.85 4.85 2.1 1.3 10.3 Applicable wire Model No. mm AWG # Insulation O.D. (mm) 0.13 to 0.33 26 to 22 1.3 to 1.7 2 SHR-001T-P0.6 Qty / reel 9,000 Material and Finish Circuits 4.1 Dimensions (mm) Model No. A B Qty / bag 3 HRP-03-S 5.0 10.0 2,000 6 HRP-06-S 12.5 17.5 1,000 12 HRP-12-S 27.5 32.5 500 Material Phosphor bronze, tin-plated (reflow treatment) PA 66, UL94V-0 RoHS compliance RoHS compliance Panel layout and Assembly layout ------------------------------------------- + 0.1 0 7.8 + 00.1 6.50.05 12.0 7.5 1-N type C 22.7 D 1-1 type 1.1 6.20.05 8.3 + 00.1 10.3+ 00.1 10.1 11.8+ 0.1 0 D C 23.1 1-N type 1-1 type Circuits Housing Panel hole dimensions (mm) Applicable Panel General tolerance thickness (mm) C[0.05] 3 BU03P-THR 15.3 6 BU06P-THR 22.8 12 BU12P-THR 37.8 0.5 to 2.0 Circuits Housing Panel hole dimensions (mm) Applicable Panel General tolerance thickness (mm) C[0.05] D[ +0.1 0 ] 3 BU03P-THR-1-K 15.3 11.8 6 BU06P-THR-1-K 22.8 19.3 12 BU12P-THR-1-K 37.8 34.3 0.5 to 2.0 Note: 1. Punch holes in the panel according to the sketch and table shown above. Burrs must be removed. 2. The strength of the panel must be considered when punching two or more holes. 3. The connector must be inserted from the same side as the hole is punched. Crimping machine, Applicator----------------------------------------------- Contact SHR-001T-P0.6 Crimping Crimp applicator machine AP-K2N Dies Crimp applicator with dies MKS-L MK/SHR/MR-001-06 APLMK SHR/MR001-06 *MKS-SC SC/SHR/MR-001-06 APLSC SHR/MR001-06 Note: *Strip-crimp applicator 3