ADVANCE TECHNICAL
INFORMATION
Characteristic / Test Conditions
Drain-Source Breakdown Voltage (VGS = 0V, ID = 250µA)
On State Drain Current 2 (VDS > ID(on) x RDS(on) Max, VGS = 10V)
Drain-Source On-State Resistance 2 (VGS = 10V, 0.5 ID[Cont.])
Zero Gate Voltage Drain Current (VDS = VDSS, VGS = 0V)
Zero Gate Voltage Drain Current (VDS = 0.8 VDSS, VGS = 0V, TC = 125°C)
Gate-Source Leakage Current (VGS = ±30V, VDS = 0V)
Gate Threshold Voltage (VDS = VGS, ID = 5mA)
050-7054 Rev - 8-2001
MAXIMUM RATINGS All Ratings: TC = 25°C unless otherwise specified.
Symbol
VDSS
ID
IDM
VGS
VGSM
PD
TJ,TSTG
TL
IAR
EAR
EAS
Parameter
Drain-Source Voltage
Continuous Drain Current @ TC = 25°C
Pulsed Drain Current 1
Gate-Source Voltage Continuous
Gate-Source Voltage Transient
Total Power Dissipation @ TC = 25°C
Linear Derating Factor
Operating and Storage Junction Temperature Range
Lead Temperature: 0.063" from Case for 10 Sec.
Avalanche Current 1 (Repetitive and Non-Repetitive)
Repetitive Avalanche Energy 1
Single Pulse Avalanche Energy 4
UNIT
Volts
Amps
Volts
Watts
W/°C
°C
Amps
mJ
STATIC ELECTRICAL CHARACTERISTICS
Symbol
BVDSS
ID(on)
RDS(on)
IDSS
IGSS
VGS(th)
UNIT
Volts
Amps
Ohms
µA
nA
Volts
MIN TYP MAX
600
31 0.170
100
500
±100
35
APT6017JLL
600
31
124
±30
±40
375
3.0
-55 to 150
300
31
35
1600
APT6017JLL
600V 31A 0.170W
G
D
S
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
USA 405 S.W. Columbia Street Bend, Oregon 97702-1035 Phone: (541) 382-8028 FAX: (541) 388-0364
EUROPE Chemin de Magret F-33700 Merignac - France Phone: (33)5 57 92 15 15 FAX: (33)5 56 47 97 61
SOT-227
GS
S
D
ISOTOP
®"UL Recognized"
POWER MOS 7TM
Power MOS 7TM is a new generation of low loss, high voltage, N-Channel
enhancement mode power MOSFETS. Both conduction and switching
losses are addressed with Power MOS 7TM by significantly lowering RDS(ON)
and Qg. Power MOS 7TM combines lower conduction and switching losses
along with exceptionally fast switching speeds inherent with APT's
patented metal gate structure.
• Lower Input Capacitance • Increased Power Dissipation
• Lower Miller Capacitance •Easier To Drive
• Lower Gate Charge, Qg •Popular SOT-227 Package
DYNAMIC CHARACTERISTICS APT6017JLL
050-7054 Rev - 8-2001
APT's devices are covered by one or more of the following U.S.patents: 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336
5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058
SOT-227 (ISOTOP®) Package Outline
31.5 (1.240)
31.7 (1.248)
Dimensions in Millimeters and (Inches)
7.8 (.307)
8.2 (.322)
30.1 (1.185)
30.3 (1.193)
38.0 (1.496)
38.2 (1.504)
14.9 (.587)
15.1 (.594)
11.8 (.463)
12.2 (.480)
8.9 (.350)
9.6 (.378)
Hex Nut M4
(4 places)
0.75 (.030)
0.85 (.033) 12.6 (.496)
12.8 (.504)
25.2 (0.992)
25.4 (1.000)
1.95 (.077)
2.14 (.084)
* Source Drain
Gate
*
r = 4.0 (.157)
(2 places) 4.0 (.157)
4.2 (.165)
(2 places)
W=4.1 (.161)
W=4.3 (.169)
H=4.8 (.187)
H=4.9 (.193)
(4 places)
3.3 (.129)
3.6 (.143)
* Source
Source terminals are shorted
internally. Current handling
capability is equal for either
Source terminal.
ADVANCE TECHNICAL
INFORMATION
Symbol
Ciss
Coss
Crss
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
Test Conditions
VGS = 0V
VDS = 25V
f = 1 MHz
VGS = 10V
VDD = 0.5 VDSS
ID = ID[Cont.] @ 25°C
VGS = 15V
VDD = 0.5 VDSS
ID = ID[Cont.] @ 25°C
RG = 0.6W
MIN TYP MAX
4300
760
48
99
23
44
13
10
29
7
UNIT
pF
nC
ns
Characteristic
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Total Gate Charge 3
Gate-Source Charge
Gate-Drain ("Miller") Charge
Turn-on Delay Time
Rise Time
Turn-off Delay Time
Fall Time
Characteristic / Test Conditions
Continuous Source Current (Body Diode)
Pulsed Source Current 1 (Body Diode)
Diode Forward Voltage 2 (VGS = 0V, IS = -ID[Cont.])
Reverse Recovery Time (IS = -ID[Cont.], dlS/dt = 100A/µs)
Reverse Recovery Charge (IS = -ID[Cont.], dl S/dt = 100A/µs)
Peak Diode Recovery dv/dt 5
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
UNIT
Amps
Volts
ns
µC
V/ns
MIN TYP MAX
31
124
1.3
600
13.0 8
1Repetitive Rating: Pulse width limited by maximum junction 3See MIL-STD-750 Method 3471
temperature. 4Starting Tj = +25°C, L = 3.33mH, RG = 25W, Peak IL = 31A
2Pulse Test: Pulse width < 380 µs, Duty Cycle < 2% 5dv
/
dt numbers reflect the limitations of the test circuit rather than the
device itself. IS £ -ID[Cont.] di/dt £ 700A/µs VR £ VDSS TJ £ 150°C
APT Reserves the right to change, without notice, the specifications and information contained herein.
THERMAL CHARACTERISTICS
Symbol
RqJC
RqJA
MIN TYP MAX
0.33
40
UNIT
°C/W
Characteristic
Junction to Case
Junction to Ambient
Symbol
IS
ISM
VSD
t rr
Q rr
dv/dt
