© Semiconductor Components Industries, LLC, 2014
July, 2014 − Rev. 7 1Publication Order Number:
MUR3020WT/D
MUR3020WTG,
MUR3040WTG,
MUR3060WTG
Switch Mode
Power Rectifiers
These state−of−the−art devices are designed for use in switching
power supplies, inverters and as free wheeling diodes.
Features
•Ultrafast 35 and 60 Nanosecond Recovery Time
•175°C Operating Junction Temperature
•Popular TO−247 Package
•High Voltage Capability to 600 V
•Low Forward Drop
•Low Leakage Specified @ 150°C Case Temperature
•Current Derating Specified @ Both Case and Ambient Temperatures
•Epoxy Meets UL 94 V−0 @ 0.125 in
•High Temperature Glass Passivated Junction
•These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant*
Mechanical Characteristics:
•Case: Epoxy, Molded
•Weight: 4.3 Grams (Approximately)
•Finish: All External Surfaces Corrosion Resistant and Terminal Leads
are Readily Solderable
•Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
•Shipped 30 Units Per Plastic Tube
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
ULTRAFAST RECTIFIERS
30 AMPERES, 200−600 VOLTS
http://onsemi.com
TO−247
CASE 340AL
1
3
2, 4
MUR30x0WT = Device Code
x = 2, 4 or 6
A = Assembly Location
Y = Year
WW = Work Week
G = Pb−Free Package
Device Package Shipping
ORDERING INFORMATION
MUR3020WTG TO−247
(Pb−Free) 30 Units/Rail
MUR3060WTG TO−247
(Pb−Free) 30 Units/Rail
MUR3040WTG TO−247
(Pb−Free) 30 Units/Rail
2
1
3
MARKING DIAGRAM
MUR30x0WT
AYWWG
MUR3020WTG, MUR3040WTG, MUR3060WTG
http://onsemi.com
2
MAXIMUM RATINGS (Per Leg)
Rating Symbol MUR3020WT MUR3040WT MUR3060WT Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
200 400 600 V
Average Rectified Forward Current @ 145°C
Total Device IF(AV) 15
30 A
Peak Repetitive Surge Current
(Rated VR, Square Wave, 20 kHz, TC = 145°C) IFM 30 A
Nonrepetitive Peak Surge Current (Surge applied at rated load
conditions, halfwave, single phase, 60 Hz) IFSM 200 150 150 A
Operating Junction and Storage Temperature TJ, Tstg − 65 to +175 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be af fected.
THERMAL CHARACTERISTICS (Per Leg)
Rating Symbol MUR3020WT MUR3040WT MUR3060WT Unit
Maximum Thermal Resistance,
− Junction−to−Case
− Junction−to−Ambient RqJC
RqJA 1.5
40
°C/W
ELECTRICAL CHARACTERISTICS (Per Leg)
Rating Symbol MUR3020WT MUR3040WT MUR3060WT Unit
Maximum Instantaneous Forward Voltage (Note 1)
(IF = 15 Amp, TC = 150°C)
(IF = 15 Amp, TC = 25°C)
VF0.85
1.05 1.12
1.25 1.4
1.7
V
Maximum Instantaneous Reverse Current (Note 1)
(Rated DC Voltage, TJ = 150°C)
(Rated DC Voltage, TJ = 25°C)
iR500
10 500
10 1000
10
mA
Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 Amps/ms) trr 35 60 60 ns
Typical Peak Reverse Recovery Current
(IF = 1.0 A, di/dt = 50 A/ms) IRM 0.7 A
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤2.0%.
MUR3020WTG, MUR3040WTG, MUR3060WTG
http://onsemi.com
3
MUR3020WT
100
0.1
0.2
0.3
0.5
1
2
3
5
10
20
30
50
iF, INSTANTANEOUS FORWARD CURRENT (AMPS)
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
vF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 1. Typical Forward Voltage (Per Leg)
TJ = 150°C100°C
25°C
100
0.01
0.02
0.05
0.1
0.2
0.5
1
2
5
10
20
50
0 20 40 60 80 100 120 140 160 180 200
IR, REVERSE CURRENT ( A)μ
VR, REVERSE VOLTAGE (VOLTS)
Figure 2. Typical Reverse Current (Per Leg)*
TJ = 150°C
100°C
25°C
*The curves shown are typical for the highest voltage device in the voltage grouping.
Typical reverse current for lower voltage selections can be estimated from these same
curves if VR is sufficiently below rated VR.
16
14
12
10
8
6
4
2
0140 150 160 170 180
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
TC, CASE TEMPERATURE (5C)
Figure 3. Current Derating, Case (Per Leg)
SQUARE WAVE
RATED VOLTAGE APPLIED
dc
14
12
10
8
6
4
2
00 20 40 60 80 100 120 140 160 180 200
TA, AMBIENT TEMPERATURE (5C)
Figure 4. Current Derating, Ambient (Per Leg)
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
16
14
12
10
8
6
4
2
00
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 5. Power Dissipation (Per Leg)
246810
12 14 16
RqJA = 15°C/W AS OBTAINED
USING A SMALL FINNED
HEAT SINK.
dc
SQUARE WAVE
dc
RqJA = 40°C/W
AS OBTAINED IN FREE AIR
WITH NO HEAT SINK.
SQUARE WAVE
TJ = 125°C
SQUARE WAVE
20
10
dc
(RESISTIVE LOAD) IPK
IAV
= π
(CAPACITIVE LOAD) IPK
IAV
= 5
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
MUR3020WTG, MUR3040WTG, MUR3060WTG
http://onsemi.com
4
MUR3040WTG
100
0.1
0.2
0.3
0.5
1
2
3
5
10
20
30
50
iF, INSTANTANEOUS FORWARD CURRENT (AMPS)
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
vF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 6. Typical Forward Voltage (Per Leg)
100
0.01
0.02
0.05
0.1
0.2
0.5
1
2
5
10
20
50
0 50 100 150 200 250 300 350 400 450
5
IR, REVERSE CURRENT ( A)μ
VR, REVERSE VOLTAGE (VOLTS)
Figure 7. Typical Reverse Current (Per Leg)
*
*The curves shown are typical for the highest voltage device in the voltage groupi
n
Typical reverse current for lower voltage selections can be estimated from these sa
m
curves if VR is sufficiently below rated VR.
16
14
12
10
8
6
4
2
0140 150 160 170
1
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
TC, CASE TEMPERATURE (°C)
Figure 8. Current Derating, Case (Per Leg)
dc
14
12
10
8
6
4
2
00 120 140 160 180 200
TA, AMBIENT TEMPERATURE (°C)
Figure 9. Current Derating, Ambient (Per Leg)
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
16
14
12
10
8
6
4
2
00
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 10. Power Dissipation (Per Leg)
246810
12 14
20
d
c
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
TJ = 150°C
100°C25°C
TJ = 150°
C
100°C
25°C
SQUARE WAVE
RATED VOLTAGE APPLIED
RθJA = 15°C/W AS OBTAINED
USING A SMALL FINNED
HEAT SINK.
SQUARE WAVE
dc
dc
RθJA = 40°C/W
AS OBTAINED IN FREE AIR
WITH NO HEAT SINK.
SQUARE WAVE
20 40 60 80 100
(RESISTIVE-INDUCTIVE LOAD) IPK
IAV
= π
TJ = 125°C
SQUARE WAVE
10
(CAPACITIVE LOAD) IPK
IAV
= 5
MUR3020WTG, MUR3040WTG, MUR3060WTG
http://onsemi.com
5
MUR3060WT
100
0.1
0.2
0.3
0.5
1
2
3
5
10
20
30
50
iF, INSTANTANEOUS FORWARD CURRENT (AMPS)
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
vF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 11. Typical Forward Voltage (Per Leg)
100
0.02
0.05
0.1
0.2
0.5
1
2
5
10
20
50
150
IR, REVERSE CURRENT ( A)μ
VR, REVERSE VOLTAGE (VOLTS)
Figure 12. Typical Reverse Current (Per Leg)*
*The curves shown are typical for the highest voltage device in the voltage grouping.
Typical reverse current for lower voltage selections can be estimated from these same
curves if VR is sufficiently below rated VR.
16
14
12
10
8
6
4
2
0
140 150 160 170 180
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
TC, CASE TEMPERATURE (5C)
Figure 13. Current Derating, Case (Per Leg)
dc
10
9
0 120 140 160 180 200
TA, AMBIENT TEMPERATURE (5C)
Figure 14. Current Derating, Ambient (Per Leg)
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
16
14
12
10
8
6
4
2
00
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 15. Power Dissipation (Per Leg)
246810
12 14 1
6
dc
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
100°C
25°C
TJ = 150°C
200 250 300 350 400 450 500 550 600 650
25°C
100°C
TJ = 150°C
SQUARE WAVE
RATED VOLTAGE APPLIED
dc
RqJA = 60°C/W
AS OBTAINED IN FREE AIR
WITH NO HEAT SINK.
SQUARE WAVE
SQUARE WAVE
dc
RqJA = 16°C/W AS OBTAINED
FROM A SMALL TO-220
HEAT SINK.
20 40 60 80 100
20
10
(CAPACITIVE LOAD) IPK
IAV
= 5
SQUARE WAVE
TJ = 125°C
IPK
IAV
= π
(RESISTIVE-INDUCTIVE LOAD)
200
8
7
6
5
4
3
2
1
0
MUR3020WTG, MUR3040WTG, MUR3060WTG
http://onsemi.com
6
0.01
0.02
0.05
0.1
0.2
0.5
1
0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1K
t, TIME (ms)
Figure 16. Thermal Response
D = 0.5
0.1
0.05
0.01
SINGLE PULSE
P(pk)
t1
t2
DUTY CYCLE, D = t1/t2
ZqJC(t) = r(t) RqJC
RqJC = 1.5°C/W MAX
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
READ TIME AT T1
TJ(pk) - TC = P(pk) ZqJC(t)
r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED)
1K
10
20
50
100
200
500
1 2 5 10 20 50 100
VR, REVERSE VOLTAGE (VOLTS)
Figure 17. Typical Capacitance (Per Leg)
C, CAPACITANCE (pF)
TJ = 25°C
MUR3020WTG, MUR3040WTG, MUR3060WTG
http://onsemi.com
7
PACKAGE DIMENSIONS
TO−247
CASE 340AL
ISSUE A
E2
L1
D
L
b4
b2
b
E
0.25 MBA
M
cA1
A
123
B
e
2X
3X
0.635 MBA
M
A
S
P
SEATING
PLANE
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. SLOT REQUIRED, NOTCH MAY BE ROUNDED.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH.
MOLD FLASH SHALL NOT EXCEED 0.13 PER SIDE. THESE
DIMENSIONS ARE MEASURED AT THE OUTERMOST
EXTREME OF THE PLASTIC BODY.
5. LEAD FINISH IS UNCONTROLLED IN THE REGION DEFINED BY
L1.
6. ∅P SHALL HAVE A MAXIMUM DRAFT ANGLE OF 1.5° TO THE
TOP OF THE PART WITH A MAXIMUM DIAMETER OF 3.91.
7. DIMENSION A1 TO BE MEASURED IN THE REGION DEFINED
BY L1.
DIM MIN MAX
MILLIMETERS
D20.30 21.40
E15.50 16.25
A4.70 5.30
b1.00 1.40
b2 1.65 2.35
e5.45 BSC
A1 2.20 2.60
c0.40 0.80
L19.80 20.80
Q5.40 6.20
E2 4.32 5.49
L1 3.50 4.50
P3.55 3.65
S6.15 BSC
b4 2.60 3.40
NOTE 6
4
NOTE 7
Q
NOTE 4
NOTE 3
NOTE 5
E2/2
NOTE 4
P
UBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
MUR3020WT/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
al
Sales Representative
ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−M arking.pdf. S CILLC r eserves the r ight to make c hanges without further notice t o any p roducts h erein. S CILLC makes no w arranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all l iabilit y, including without limitation special, consequential or incident al d amages. “Typical” parameters which may be p rovided i n SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application b y c ust omer’s technical e xperts. SCILLC does not c onvey a ny license under its p atent rights n or the rights of others. SCILLC p roducts a re n ot d esigned, i ntended,
or authorized for use as c omponent s i n s yst ems i nt ended f or s urgic al i m plant i nt o the body, or other applications intended t o s upport o r s ust ain life, or for any other a pplicat ion in w hich
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC an d it s officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and r easonable a ttorney f ees a rising o ut of, directly or i ndirectly, a ny c laim o f p ersonal i njury o r d eat h a ssociat ed w ith s uch u nintended o r u naut horized u se, e ven if such c laim
alleges that SCILLC was negligent regarding the d esign or manufacture of the p art. S CILLC i s a n E qual O pportunity/Af firmative Act ion Employer. T his literature is s ubject t o all applicable
copyright laws and is not for resale in any manner.
