Rev: 1.01 6/2003 1/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
Product Preview
GS8320EV18/32/36T-250/225/200/166/150/133
2M x 18, 1M x 32, 1M x 36
36Mb Sync Burst SRAMs
250 MHz–133 MHz
1.8 V VDD
1.8 V I/O
100-Pin TQFP
Commercial Temp
Industrial Temp
Features
• FT pin for user-configurable flow through or pipeline
operation
• Dual Cycle Deselect (DCD) operation
• 1.8 V +10%/–10% core power supply
• 1.8 V V I/O supply
• LBO pin for Linear or Interleaved Burst mode
• Internal input resistors on mode pins allow floating mode pins
• Default to Interleaved Pipeline mode
• Byte Write (BW) and/or Global Write (GW) operation
• Internal self-timed write cycle
• Automatic power-down for portable applications
• JEDEC-standard 100-lead TQFP package
Functional Description
Applications
The GS8320EV18/32/36T is a 37,748,736-bithigh
performance synchronous SRAM with a 2-bit burst address
counter. Although of a type originally developed for Level 2
Cache applications supporting high performance CPUs, the
device now finds application in synchronous SRAM
applications, ranging from DSP main store to networking chip
set support.
Controls
Addresses, data I/Os, chip enables (E1, E2, E3), address burst
control inputs (ADSP, ADSC, ADV), and write control inputs
(Bx, BW, GW) are synchronous and are controlled by a
positive-edge-triggered clock input (CK). Output enable (G)
and power down control (ZZ) are asynchronous inputs. Burst
cycles can be initiated with either ADSP or ADSC inputs. In
Burst mode, subsequent burst addresses are generated
internally and are controlled by ADV
. The burst address
counter may be configured to count in either linear or
interleave order with the Linear Burst Order (LBO) input. The
Burst function need not be used. New addresses can be loaded
on every cycle with no degradation of chip performance.
Flow Through/Pipeline Reads
The function of the Data Output register can be controlled by
the user via the FT mode pin (Pin 14). Holding the FT mode pin
low places the RAM in Flow Through mode, causing output
data to bypass the Data Output Register. Holding FT high
places the RAM in Pipeline mode, activating the rising-edge-
triggered Data Output Register.
DCD Pipelined Reads
The GS8160EV18/32/36T is a DCD (Dual Cycle Deselect)
pipelined synchronous SRAM. SCD (Single Cycle Deselect)
versions are also available. DCD SRAMs pipeline disable
commands to the same degree as read commands. DCD RAMs
hold the deselect command for one full cycle and then begin
turning off their outputs just after the second rising edge of
clock.
Byte Write and Global Write
Byte write operation is performed by using Byte Write enable
(BW) input combined with one or more individual byte write
signals (Bx). In addition, Global Write (GW) is available for
writing all bytes at one time, regardless of the Byte Write
control inputs.
Sleep Mode
Low power (Sleep mode) is attained through the assertion
(High) of the ZZ signal, or by stopping the clock (CK).
Memory data is retained during Sleep mode.
Core and Interface Voltages
The GS8320EV18/32/36T operates on a 1.8 V power supply.
All input are 1.8 V compatible. Separate output power (VDDQ)
pins are used to decouple output noise from the internal circuits
and are 1.8 V compatible.
-250 -225 -200 -166 -150 -133 Unit
Pipeline
3-1-1-1
tKQ
tCycle
2.3
4.0
2.5
4.4
2.7
5.0
2.9
6.0
3.3
6.7
3.5
7.5
ns
ns
Curr (x18)
Curr (x36)
285
350
265
320
245
295
220
260
210
240
185
215
mA
mA
Flow
Through
2-1-1-1
tKQ
tCycle
6.5
6.5
7.0
7.0
7.5
7.5
8.0
8.0
8.5
8.5
8.5
8.5
ns
ns
Curr (x18)
Curr (x36)
205
235
195
225
185
210
175
200
165
190
155
175
mA
mA
Rev: 1.01 6/2003 2/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
GS8320EV18 100-Pin TQFP Pinout
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
VDDQ
VSS
DQB
DQB
VSS
VDDQ
DQB
DQB
VDD
NC
VSS
DQB
DQB
VDDQ
VSS
DQB
DQB
DQPB
VSS
VDDQ
VDDQ
VSS
DQA
DQA
VSS
VDDQ
DQA
DQA
VSS
NC
VDD
ZZ
DQA
DQA
VDDQ
VSS
DQA
DQA
VSS
VDDQ
LBO
A
A
A
A
A1
A0
NC
A
VSS
VDD
A
A
A
A
A
A
A
A
A
A
E1
E2
NC
NC
BB
BA
E3
CK
GW
BW
VDD
VSS
G
ADSC
ADSP
ADV
A
A
A
2M x 18
Top View
DQPA
A
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC 10099989796959493929190898887868584838281
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
FT
Rev: 1.01 6/2003 3/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
GS8320EV32 100-Pin TQFP Pinout
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
VDDQ
VSS
DQC
DQC
VSS
VDDQ
DQC
DQC
VDD
NC
VSS
DQD
DQD
VDDQ
VSS
DQD
DQD
DQD
VSS
VDDQ
VDDQ
VSS
DQB
DQB
VSS
VDDQ
DQB
DQB
VSS
NC
VDD
ZZ
DQA
DQA
VDDQ
VSS
DQA
DQA
VSS
VDDQ
LBO
A
A
A
A
A1
A0
NC
A
VSS
VDD
A
A
A
A
A
A
A
A
A
A
E1
E2
BD
BC
BB
BA
E3
CK
GW
BW
VDD
VSS
G
ADSC
ADSP
ADV
A
A
A
1M x 32
Top View
DQB
NC
DQB
DQB
DQB
DQA
DQA
DQA
DQA
NC
DQC
DQC
DQC
DQD
DQD
DQD
NC
DQC
NC 10099989796959493929190898887868584838281
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
FT
Rev: 1.01 6/2003 4/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
GS8320EV36 100-Pin TQFP Pinout
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
VDDQ
VSS
DQC
DQC
VSS
VDDQ
DQC
DQC
VDD
NC
VSS
DQD
DQD
VDDQ
VSS
DQD
DQD
DQD
VSS
VDDQ
VDDQ
VSS
DQB
DQB
VSS
VDDQ
DQB
DQB
VSS
NC
VDD
ZZ
DQA
DQA2
VDDQ
VSS
DQA
DQA
VSS
VDDQ
LBO
A
A
A
A
A1
A0
NC
A
VSS
VDD
A
A
A
A
A
A
A
A
A
A
E1
E2
BD
BC
BB
BA
E3
CK
GW
BW
VDD
VSS
G
ADSC
ADSP
ADV
A
A
A
1M x 36
Top View
DQB
DQPB
DQB
DQB
DQB
DQA
DQA
DQA
DQA
DQPA
DQC
DQC
DQC
DQD
DQD
DQD
DQPD
DQC
DQPC
10099989796959493929190898887868584838281
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
FT
Rev: 1.01 6/2003 5/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
TQFP Pin Description
Symbol Type Description
A0, A1I Address field LSBs and Address Counter preset Inputs
A I Address Inputs
DQA
DQB
DQC
DQD
I/O Data Input and Output pins
NC No Connect
BW IByte Write—Writes all enabled bytes; active low
BA, BBI Byte Write Enable for DQA, DQB Data I/Os; active low
BC, BDI Byte Write Enable for DQC, DQD Data I/Os; active low
CK I Clock Input Signal; active high
GW I Global Write Enable—Writes all bytes; active low
E1, E3I Chip Enable; active low
E2I Chip Enable; active high
GI Output Enable; active low
ADV I Burst address counter advance enable; active low
ADSP, ADSC I Address Strobe (Processor, Cache Controller); active low
ZZ I Sleep Mode control; active high
FT I Flow Through or Pipeline mode; active low
LBO I Linear Burst Order mode; active low
VDD I Core power supply
VSS I I/O and Core Ground
VDDQ I Output driver power supply
Rev: 1.01 6/2003 6/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
GS8320EV18/32/36 Block Diagram
A1
A0 A0
A1
D0
D1 Q1
Q0
Counter
Load
DQ
DQ
Register
Register
DQ
Register
DQ
Register
DQ
Register
DQ
Register
DQ
Register
DQ
Register
DQ
Register
DQ
Register
A0–An
LBO
ADV
CK
ADSC
ADSP
GW
BW
E1
G
ZZ Power Down
Control
Memory
Array
36 36
4
A
QD
E2
E3
DQx1–DQx9
Note: Only x36 version shown for simplicity.
1
BA
BB
BC
BD
FT
Rev: 1.01 6/2003 7/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
Note:
There pull-down device on the ZZ pin, so input pin can be unconnected and the chip will operate in the default states as specified in the above
tables.
Burst Counter Sequences
BPR 1999.05.18
Byte Write Truth Table
Notes:
1. All byte outputs are active in read cycles regardless of the state of Byte Write Enable inputs.
2. Byte Write Enable inputs BA, BB, BC and/or BD may be used in any combination with BW to write single or multiple bytes.
3. All byte I/Os remain High-Z during all write operations regardless of the state of Byte Write Enable inputs.
4. Bytes “C” and “D” are only available on the x32 and x36 versions.
Mode Pin Functions
Mode Name Pin
Name State Function
Burst Order Control LBO L Linear Burst
H Interleaved Burst
Power Down Control ZZ L or NC Active
H Standby, IDD = ISB
Function GW BW BABBBCBDNotes
Read H H X X X X 1
Read HLHHHH1
Write byte a H L L H H H 2, 3
Write byte b H L H L H H 2, 3
Write byte c H L H H L H 2, 3, 4
Write byte d H L H H H L 2, 3, 4
Write all bytesHLLLLL2, 3, 4
Write all bytesLXXXXX
Linear Burst Sequence
Note: The burst counter wraps to initial state on the 5th clock.
Interleaved Burst Sequence
Note: The burst counter wraps to initial state on the 5th clock.
A[1:0] A[1:0] A[1:0] A[1:0]
1st address 00 01 10 11
2nd address 01 10 11 00
3rd address 10 11 00 01
4th address 11 00 01 10
A[1:0] A[1:0] A[1:0] A[1:0]
1st address 00 01 10 11
2nd address 01 00 11 10
3rd address 10 11 00 01
4th address 11 10 01 00
Rev: 1.01 6/2003 8/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
Synchronous Truth Table
Operation Address
Used
State
Diagram
Key5
E1E2ADSP ADSC ADV W3DQ4
Deselect Cycle, Power Down None X H X X L X X High-Z
Deselect Cycle, Power Down None X L F L X X X High-Z
Deselect Cycle, Power Down None X L F H L X X High-Z
Read Cycle, Begin Burst External R L T L X X X Q
Read Cycle, Begin Burst External R L T H L X F Q
Write Cycle, Begin Burst External W L T H L X T D
Read Cycle, Continue Burst Next CR X X H H L F Q
Read Cycle, Continue Burst Next CR H X X H L F Q
Write Cycle, Continue Burst Next CW X X H H L T D
Write Cycle, Continue Burst Next CW H X X H L T D
Read Cycle, Suspend Burst Current X X H H H F Q
Read Cycle, Suspend Burst Current H X X H H F Q
Write Cycle, Suspend Burst Current X X H H H T D
Write Cycle, Suspend Burst Current H X X H H T D
Notes:
1. X = Don’t Care, H = High, L = Low
2. E = T (True) if E2 = 1 and E3 = 0; E = F (False) if E2 = 0 or E3 = 1
3. W = T (True) and F (False) is defined in the Byte Write Truth Table preceding.
4. G is an asynchronous input. G can be driven high at any time to disable active output drivers. G low can only enable active drivers (shown
as “Q” in the Truth Table above).
5. All input combinations shown above are tested and supported. Input combinations shown in gray boxes need not be used to accomplish
basic synchronous or synchronous burst operations and may be avoided for simplicity.
6. Tying ADSP high and ADSC low allows simple non-burst synchronous operations. See BOLD items above.
7. Tying ADSP high and ADV low while using ADSC to load new addresses allows simple burst operations. See ITALIC items above.
Rev: 1.01 6/2003 9/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
First Write First Read
Burst Write Burst Read
Deselect
R
W
CRCW
X
X
WR
R
WR
XX
X
Simple Synchronous OperationSimple Burst Synchronous Operation
CR
R
CW CR
CR
Simplified State Diagram
Notes:
1. The diagram shows only supported (tested) synchronous state transitions. The diagram presumes G is tied low.
2. The upper portion of the diagram assumes active use of only the Enable (E1) and Write (BA, BB, BC, BD, BW, and GW) control inputs, and
that ADSP is tied high and ADSC is tied low.
3. The upper and lower portions of the diagram together assume active use of only the Enable, Write, and ADSC control inputs, and
assumes ADSP is tied high and ADV is tied low.
Rev: 1.01 6/2003 10/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
First Write First Read
Burst Write Burst Read
Deselect
R
W
CRCW
X
X
WR
R
WR
X
X
X
CR
R
CW CR
CR
W
CW
W
CW
Simplified State Diagram with G
Notes:
1. The diagram shows supported (tested) synchronous state transitions plus supported transitions that depend upon the use of G.
2. Use of “Dummy Reads” (Read Cycles with G High) may be used to make the transition from Read cycles to Write cycles without passing
through a Deselect cycle. Dummy Read cycles increment the address counter just like normal read cycles.
3. Transitions shown in gray tone assume G has been pulsed high long enough to turn the RAM’s drivers off and for incoming data to meet
Data Input Set Up Time.
Rev: 1.01 6/2003 11/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
Note:
Permanent damage to the device may occur if the Absolute Maximum Ratings are exceeded. Operation should be restricted to Recommended
Operating Conditions. Exposure to conditions exceeding the Absolute Maximum Ratings, for an extended period of time, may affect reliability of
this component.
Absolute Maximum Ratings
(All voltages reference to VSS)
Symbol Description Value Unit
VDD Voltage on VDD Pins –0.5 to 3.6 V
VDDQ Voltage in VDDQ Pins –0.5 to 3.6 V
VI/O Voltage on I/O Pins –0.5 to VDDQ +0.5 (≤ 3.6 V max.) V
VIN Voltage on Other Input Pins –0.5 to VDD +0.5 (≤ 3.6 V max.) V
IIN Input Current on Any Pin +/–20 mA
IOUT Output Current on Any I/O Pin +/–20 mA
PDPackage Power Dissipation 1.5 W
TSTG Storage Temperature –55 to 125 oC
TBIAS Temperature Under Bias –55 to 125 oC
Rev: 1.01 6/2003 12/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
Power Supply Voltage Ranges
Parameter Symbol Min. Typ. Max. Unit Notes
1.8 V Supply Voltage VDD1 1.6 1.8 2.0 V
1.8 V VDDQ I/O Supply Voltage VDDQ1 1.6 1.8 2.0 V
Notes:
1. The part numbers of Industrial Temperature Range versions end the character “I”. Unless otherwise noted, all performance specifications quoted are
evaluated for worst case in the temperature range marked on the device.
2. Input Under/overshoot voltage must be –2 V > Vi < VDDn+2 V not to exceed 3.6 V maximum, with a pulse width not to exceed 20% tKC.
VDDQ Range Logic Levels
Parameter Symbol Min. Typ. Max. Unit Notes
VDD Input High Voltage VIH 0.6*VDD —VDD + 0.3 V1
VDD Input Low Voltage VIL –0.3 —0.3*VDD V1
VDDQ I/O Input High Voltage VIHQ 0.6*VDD —VDDQ + 0.3 V1,3
VDDQ I/O Input Low Voltage VILQ –0.3 —0.3*VDD V1,3
Notes:
1. The part numbers of Industrial Temperature Range versions end the character “I”. Unless otherwise noted, all performance specifications quoted are
evaluated for worst case in the temperature range marked on the device.
2. Input Under/overshoot voltage must be –2 V > Vi < VDDn+2 V not to exceed 3.6 V maximum, with a pulse width not to exceed 20% tKC.
3. VIHQ (max) is voltage on VDDQ pins plus 0.3 V.
Recommended Operating Temperatures
Parameter Symbol Min. Typ. Max. Unit Notes
Ambient Temperature (Commercial Range Versions) TA02570°C2
Ambient Temperature (Industrial Range Versions) TA–40 25 85 °C2
Note:
1. The part numbers of Industrial Temperature Range versions end the character “I”. Unless otherwise noted, all performance specifications quoted are
evaluated for worst case in the temperature range marked on the device.
2. Input Under/overshoot voltage must be –2 V > Vi < VDDn+2 V not to exceed 3.6 V maximum, with a pulse width not to exceed 20% tKC.
Rev: 1.01 6/2003 13/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
Note: These parameters are sample tested.
Capacitance
(TA = 25oC, f = 1 MHZ, VDD = 2.5 V)
Parameter Symbol Test conditions Typ. Max. Unit
Input Capacitance CIN VIN = 0 V 45pF
Input/Output Capacitance CI/O VOUT = 0 V 67pF
AC Test Conditions
Parameter Conditions
Input high level VDD – 0.2 V
Input low level 0.2 V
Input slew rate 1 V/ns
Input reference level VDD/2
Output reference level VDDQ/2
Output load Fig. 1
Notes:
1. Include scope and jig capacitance.
2. Test conditions as specified with output loading as shown in Fig. 1
unless otherwise noted.
3. Device is deselected as defined by the Truth Table.
20% tKC
V
SS – 2.0 V
50%
VSS
VIH
Undershoot Measurement and Timing Overshoot Measurement and Timing
20% tKC
VDD + 2.0 V
50%
VDD
VIL
DQ
VDDQ/2
50Ω30pF*
Output Load 1
* Distributed Test Jig Capacitance
Rev: 1.01 6/2003 14/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
DC Electrical Characteristics
Parameter Symbol Test Conditions Min Max
Input Leakage Current
(except mode pins) IIL VIN = 0 to VDD –1 uA 1 uA
ZZ Input Current IIN1
VDD ≥ VIN ≥ VIH
0 V ≤ VIN ≤ VIH
–1 uA
–1 uA
1 uA
100 uA
FT Input Current IIN2
VDD ≥ VIN ≥ VIL
0 V ≤ VIN ≤ VIL
–100 uA
–1 uA
1 uA
1 uA
Output Leakage Current IOL Output Disable, VOUT = 0 to VDD –1 uA 1 uA
Output High Voltage VOH1 IOH = –4 mA, VDDQ = 1.6 V VDDQ – 0.4 V —
Output Low Voltage VOL1 IOL = 4 mA, VDD = 1.6 V —0.4 V
Rev: 1.01 6/2003 15/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
Operating Currents
Notes:
1. IDD and IDDQ apply to VDD and VDDQ operation.
2. All parameters listed are worst case scenario.
Parameter Test Conditions Mode Symbol
-250 -225 -200 -166 -150 -133
Unit
0
to
70°C
–40
to
85°C
0
to
70°C
–40
to
85°C
0
to
70°C
–40
to
85°C
0
to
70°C
–40
to
85°C
0
to
70°C
–40
to
85°C
0
to
70°C
–40
to
85°C
Operating
Current
Device Selected;
All other inputs
≥VIH or ≤ VIL
Output open
(x32/
x36)
Pipeline IDD
IDDQ
300
50
320
50
275
45
295
45
255
40
275
40
225
35
245
35
210
30
230
30
190
25
210
25 mA
Flow
Through
IDD
IDDQ
210
25
220
25
200
25
210
25
190
20
200
20
180
20
190
20
170
20
180
20
160
15
170
15 mA
(x18)
Pipeline IDD
IDDQ
260
25
280
25
240
25
260
25
225
20
245
20
200
20
220
20
190
20
210
20
170
15
190
15 mA
Flow
Through
IDD
IDDQ
190
15
200
15
180
15
190
15
170
15
180
15
160
15
170
15
150
15
160
15
140
15
150
15 mA
Standby
Current ZZ ≥ VDD – 0.2 V —
Pipeline ISB 60 80 60 80 60 80 60 80 60 80 60 80 mA
Flow
Through ISB 60 80 60 80 60 80 60 80 60 80 60 80 mA
Deselect
Current
Device Deselected;
All other inputs
≥ VIH or ≤ VIL
—
Pipeline IDD 100 115 95 110 90 105 85 100 85 100 80 95 mA
Flow
Through IDD 85 100 85 100 80 95 80 95 75 90 70 85 mA
Rev: 1.01 6/2003 16/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
AC Electrical Characteristics
Notes:
1. These parameters are sampled and are not 100% tested.
2. ZZ is an asynchronous signal. However, in order to be recognized on any given clock cycle, ZZ must meet the specified setup and hold
times as specified above.
Parameter Symbol -250 -225 -200 -166 -150 -133 Unit
Min Max Min Max Min Max Min Max Min Max Min Max
Pipeline
Clock Cycle Time tKC 4.0 —4.4 —5.0 —6.0 —6.7 —7.5 —ns
Clock to Output Valid tKQ —2.3 —2.5 —2.7 —2.9 —3.3 —3.5 ns
Clock to Output Invalid tKQX 1.0 —1.0 —1.0 —1.0 —1.0 —1.0 —ns
Clock to Output in Low-Z tLZ11.0 —1.0 —1.0 —1.0 —1.0 —1.0 —ns
Setup time tS 1.2 —1.3 —1.4 —1.5 —1.5 —1.5 —ns
Hold time tH 0.2 —0.3 —0.4 —0.5 —0.5 —0.5 —ns
Flow
Through
Clock Cycle Time tKC 6.5 —7.0 —7.5 —8.0 —8.5 —8.5 —ns
Clock to Output Valid tKQ —6.5 —7.0 —7.5 —8.0 —8.5 —8.5 ns
Clock to Output Invalid tKQX 3.0 —3.0 —3.0 —3.0 —3.0 —3.0 —ns
Clock to Output in Low-Z tLZ13.0 —3.0 —3.0 —3.0 —3.0 —3.0 —ns
Setup time tS 1.5 —1.5 —1.5 —1.5 —1.5 —1.5 —ns
Hold time tH 0.5 —0.5 —0.5 —0.5 —0.5 —0.5 —ns
Clock HIGH Time tKH 1.3 —1.3 —1.3 —1.3 —1.5 —1.7 —ns
Clock LOW Time tKL 1.5 —1.5 —1.5 —1.5 —1.7 —2—ns
Clock to Output in
High-Z tHZ11.0 2.3 1.0 2.5 1.0 2.7 1.0 2.9 1.0 3.0 1.0 3.0 ns
G to Output Valid tOE —2.3 —2.5 —2.7 —2.9 —3.3 —3.5 ns
G to output in Low-Z tOLZ10—0—0—0—0—0—ns
G to output in High-Z tOHZ1—2.3 —2.5 —2.7 —2.9 —3.0 —3.0 ns
ZZ setup time tZZS25—5—5—5—5—5—ns
ZZ hold time tZZH21—1—1—1—1—1—ns
ZZ recovery tZZR 20 —20 —20 —20 —20 —20 —ns
Rev: 1.01 6/2003 17/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
Pipeline Mode Timing (DCD)
Begin Read A Cont Deselect Deselect Write B Read C Read C+1 Read C+2 Read C+3 Cont Deselect Deselect
tKQX
tKQ
tLZtH
tS
tOHZtOE
tH
tS
tH
tS
tH
tS
tH
tS
tHtS
tS
tH
tS
tHtS
tH
tS
tKCtKC
tKLtKL
tKHtKH
Q(A) D(B) Q(C) Q(C+1) Q(C+2) Q(C+3)
ABC
Hi-Z
Deselected with E1
E2 and E3 only sampled with ADSC
ADSC initiated read
CK
ADSP
ADSC
ADV
A0–An
GW
BW
Ba–Bd
E1
E2
E3
G
DQa–DQd
Rev: 1.01 6/2003 18/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
Flow Through Mode Timing (DCD)
Begin Read A Cont Deselect Write B Read C Read C+1 Read C+2 Read C+3 Read C Deselect
tKQX
tHZ
tLZtH
tS
tOHZ
tOE
tKQ
tH
tS
tH
tS
tH
tS
tH
tS
tH
tS
tH
tS
tH
tS
tHtS
tH
tS
tH
tS
tH
tS
tKCtKC
tKLtKL
tKHtKH
ABC
Q(A) D(B) Q(C) Q(C+1) Q(C+2) Q(C+3) Q(C)
E2 and E3 only sampled with ADSP and ADSC
E1 masks ADSP
ADSC initiated read
Deselected with E1
E1 masks ADSP
Fixed High
CK
ADSP
ADSC
ADV
A0–An
GW
BW
Ba–Bd
E1
E2
E3
G
DQa–DQd
Rev: 1.01 6/2003 19/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
Sleep Mode
During normal operation, ZZ must be pulled low, either by the user or by its internal pull down resistor. When ZZ is pulled high,
the SRAM will enter a Power Sleep mode after 2 cycles. At this time, internal state of the SRAM is preserved. When ZZ returns to
low, the SRAM operates normally after 2 cycles of wake up time.
Sleep mode is a low current, power-down mode in which the device is deselected and current is reduced to ISB2. The duration of
Sleep mode is dictated by the length of time the ZZ is in a High state. After entering Sleep mode, all inputs except ZZ become
disabled and all outputs go to High-Z The ZZ pin is an asynchronous, active high input that causes the device to enter Sleep mode.
When the ZZ pin is driven high, ISB2 is guaranteed after the time tZZI is met. Because ZZ is an asynchronous input, pending
operations or operations in progress may not be properly completed if ZZ is asserted. Therefore, Sleep mode must not be initiated
until valid pending operations are completed. Similarly, when exiting Sleep mode during tZZR, only a Deselect or Read commands
may be applied while the SRAM is recovering from Sleep mode.
CK
ADSP
ADSC
tH tKH tKL
tKC
tS
ZZ tZZR
tZZH
tZZS
~
~
~
~~
~~
~~
~~
~
Snooze
Sleep Mode Timing Diagram
Rev: 1.01 6/2003 20/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
TQFP Package Drawing
D1
D
E1
E
Pin 1
b
e
c
L
L1
A2
A1
Y
θ
Notes:
1. All dimensions are in millimeters (mm).
2. Package width and length do not include mold protrusion.
Symbol Description Min. Nom. Max
A1 Standoff 0.05 0.10 0.15
A2 Body Thickness 1.35 1.40 1.45
b Lead Width 0.20 0.30 0.40
c Lead Thickness 0.09 —0.20
D Terminal Dimension 21.9 22.0 22.1
D1 Package Body 19.9 20.0 20.1
E Terminal Dimension 15.9 16.0 16.1
E1 Package Body 13.9 14.0 14.1
e Lead Pitch —0.65 —
L Foot Length 0.45 0.60 0.75
L1 Lead Length —1.00 —
Y Coplanarity 0.10
θLead Angle 0°—7°
Rev: 1.01 6/2003 21/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
Ordering Information for GSI Synchronous Burst RAMs
Org Part Number1Type Package Speed2
(MHz/ns) TA3Status
2M x 18 GS8320EV18T-250 Pipeline/Flow Through TQFP 250/5.5 C
2M x 18 GS8320EV18T-225 Pipeline/Flow Through TQFP 225/6 C
2M x 18 GS8320EV18T-200 Pipeline/Flow Through TQFP 200/6.5 C
2M x 18 GS8320EV18T-166 Pipeline/Flow Through TQFP 166/7 C
2M x 18 GS8320EV18T-150 Pipeline/Flow Through TQFP 150/7.5 C
2M x 18 GS8320EV18T-133 Pipeline/Flow Through TQFP 133/8.5 C
1M x 32 GS8320EV32T-250 Pipeline/Flow Through TQFP 250/5.5 C
1M x 32 GS8320EV32T-225 Pipeline/Flow Through TQFP 225/6 C
1M x 32 GS8320EV32T-200 Pipeline/Flow Through TQFP 200/6.5 C
1M x 32 GS8320EV32T-166 Pipeline/Flow Through TQFP 166/7 C
1M x 32 GS8320EV32T-150 Pipeline/Flow Through TQFP 150/7.5 C
1M x 32 GS8320EV32T-133 Pipeline/Flow Through TQFP 133/8.5 C
1M x 36 GS8320EV36T-250 Pipeline/Flow Through TQFP 250/5.5 C
1M x 36 GS8320EV36T-225 Pipeline/Flow Through TQFP 225/6 C
1M x 36 GS8320EV36T-200 Pipeline/Flow Through TQFP 200/6.5 C
1M x 36 GS8320EV36T-166 Pipeline/Flow Through TQFP 166/7 C
1M x 36 GS8320EV36T-150 Pipeline/Flow Through TQFP 150/7.5 C
1M x 36 GS8320EV36T-133 Pipeline/Flow Through TQFP 133/8.5 C
2M x 18 GS8320EV18T-250I Pipeline/Flow Through TQFP 250/5.5 I
2M x 18 GS8320EV18T-225I Pipeline/Flow Through TQFP 225/6 I
2M x 18 GS8320EV18T-200I Pipeline/Flow Through TQFP 200/6.5 I
2M x 18 GS8320EV18T-166I Pipeline/Flow Through TQFP 166/7 I
2M x 18 GS8320EV18T-150I Pipeline/Flow Through TQFP 150/7.5 I
2M x 18 GS8320EV18T-133I Pipeline/Flow Through TQFP 133/8.5 I
1M x 32 GS8320EV32T-250I Pipeline/Flow Through TQFP 250/5.5 I
1M x 32 GS8320EV32T-225I Pipeline/Flow Through TQFP 225/6 I
1M x 32 GS8320EV32T-200I Pipeline/Flow Through TQFP 200/6.5 I
1M x 32 GS8320EV32T-166I Pipeline/Flow Through TQFP 166/7 I
1M x 32 GS8320EV32T-150I Pipeline/Flow Through TQFP 150/7.5 I
1M x 32 GS8320EV32T-133I Pipeline/Flow Through TQFP 133/8.5 I
Notes:
1. Customers requiring delivery in Tape and Reel should add the character “T” to the end of the part number. Example: GS8320V18T-150IT.
2. The speed column indicates the cycle frequency (MHz) of the device in Pipeline mode and the latency (ns) in Flow Through mode. Each
device is Pipeline/Flow through mode-selectable by the user.
3. TA = C = Commercial Temperature Range. TA = I = Industrial Temperature Range.
4. GSI offers other versions this type of device in many different configurations and with a variety of different features, only some of which
are covered in this data sheet. See the GSI Technology web site (www.gsitechnology.com) for a complete listing of current offerings.
Rev: 1.01 6/2003 22/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
1M x 36 GS8320EV36T-250I Pipeline/Flow Through TQFP 250/5.5 I
1M x 36 GS8320EV36T-225I Pipeline/Flow Through TQFP 225/6 I
1M x 36 GS8320EV36T-200I Pipeline/Flow Through TQFP 200/6.5 I
1M x 36 GS8320EV36T-166I Pipeline/Flow Through TQFP 166/7 I
1M x 36 GS8320EV36T-150I Pipeline/Flow Through TQFP 150/7.5 I
1M x 36 GS8320EV36T-133I Pipeline/Flow Through TQFP 133/8.5 I
Org Part Number1Type Package Speed2
(MHz/ns) TA3Status
Notes:
1. Customers requiring delivery in Tape and Reel should add the character “T” to the end of the part number. Example: GS8320V18T-150IT.
2. The speed column indicates the cycle frequency (MHz) of the device in Pipeline mode and the latency (ns) in Flow Through mode. Each
device is Pipeline/Flow through mode-selectable by the user.
3. TA = C = Commercial Temperature Range. TA = I = Industrial Temperature Range.
4. GSI offers other versions this type of device in many different configurations and with a variety of different features, only some of which
are covered in this data sheet. See the GSI Technology web site (www.gsitechnology.com) for a complete listing of current offerings.
Rev: 1.01 6/2003 23/23 © 2003, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8320EV18/32/36T-250/225/200/166/150/133
Product Preview
36Mb Sync SRAM Datasheet Revision History
DS/DateRev. Code: Old;
New
Types of Changes
Format or Content Page;Revisions;Reason
8320EV18_r1 • Creation of new datasheet
8320EV18_r1;
8320EV18_r1_01 Content • Removed all address pin numbers except 0 and 1
• Updated AC Characteristics table with new numbers
