ILD205T/206T/207T/211T/213T/217T Vishay Semiconductors Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 package FEATURES * Two channel coupler * SOIC-8 surface mountable package A1 8C * Standard lead spacing of 0.05" C2 7E * Available only on tape and reel option (conforms to EIA standard 481-2) A3 6C * Isolation test voltage, 4000 VRMS C4 5E * Compatible with dual wave, vapor phase and IR reflow soldering i179018 * Lead (Pb)-free component * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC DESCRIPTION AGENCY APPROVALS The ILD205T/206T/207T/211T/213T/217T are optically coupled pairs with a Gallium Arsenide infrared LED and a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output. The ILD205T/206T/207T/211T/213T/217T come in a standard SOIC-8 small outline package for surface mounting which makes it ideally suited for high density applications with limited space. In addition to eliminating through-holes requirements, this package conforms to standards for surface mounted devices. A specified minimum and maximum CTR allows a narrow tolerance in the electrical design of the adjacent circuits. The high BVCEO of 70 V gives a higher safety margin compared to the industry standard of 30 V. * UL1577, file no. E52744 system code Y * CUL - file no. E52744, equivalent to CSA bulletin 5A * DIN EN 60747-5-2 (VDE 0884) available with option 1 ORDER INFORMATION PART ILD205T REMARKS CTR 40 to 80 %, SOIC-8 ILD206T CTR 63 to 125 %, SOIC-8 ILD207T CTR 100 to 200 %, SOIC-8 ILD211T CTR > 20 %, SOIC-8 ILD213T CTR > 100 %, SOIC-8 ILD217T CTR > 100 %, SOIC-8 Document Number: 83647 Rev. 1.7, 19-Nov-07 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 1 ILD205T/206T/207T/211T/213T/217T Vishay Semiconductors Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 package ABSOLUTE MAXIMUM RATINGS PARAMETER (1) TEST CONDITION SYMBOL VALUE UNIT INPUT Peak reverse voltage VR Peak pulsed voltage 1 s, 300 pps Continuous forward current per channel Power dissipation Pdiss Derate linearly from 25 C 6 V 1 A 30 mA 50 mW 0.66 mW/C OUTPUT Collector emitter breakdown voltage BVCEO 70 V Emitter collector breakdown voltage BVECO 7 V Power dissipation per channel Pdiss 125 mW 1.67 mW/C VISO 4000 VRMS Ptot 300 mW 4 mW/C Storage temperature Tstg - 55 to + 150 C Operating temperature Tamb - 55 to + 100 C Soldering time from 260 C (2) Tsld 10 s Derate linearly from 25 C COUPLER Isolation test voltage t=1s Total package dissipation ambient (2 LEDs and 2 detectors, 2 channels) Derate linearly from 25 C Notes (1) T amb = 25 C, unless otherwise specified. Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices. ELECTRICAL CHARACTERISTCS PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 10 mA VF 1.2 1.55 V Reverse current VR = 6 V IR 0.1 100 A Capacitance VR = 0 V CO 25 pF OUTPUT Collector emitter breakdown voltage IC = 10 A BVCEO 70 V Emitter collector breakdown voltage IE = 10 A BVECO 7 V VCE = 10 V, IF = 0 A ICEO 5 VCE = 0 V CCE 10 IF = 10 mA, IC = 2.5 mA VCEsat Collector emitter leakage current Collector emitter capacitance 50 nA pF COUPLER Collector emitter saturation voltage 0.4 V Capacitance (input to output) CIO 0.5 pF Resistance (input to output) RIO 100 G Note Tamb = 25 C, unless otherwise specified. Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. www.vishay.com 2 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83647 Rev. 1.7, 19-Nov-07 ILD205T/206T/207T/211T/213T/217T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 package Vishay Semiconductors CURRENT TRANSFER RATIO PARAMETER TEST CONDITION VCE = 5 V, IF = 10 mA DC current transfer ratio VCE = 5 V, IF = 1.0 mA PART SYMBOL MIN. MAX. UNIT ILD205T CTRDC 40 TYP. 80 % ILD206T CTRDC 63 125 % ILD207T CTRDC 100 200 % ILD211T CTRDC 20 ILD213T CTRDC 100 ILD205T CTRDC 13 30 % ILD206T CTRDC 22 45 % ILD207T CTRDC 34 70 % ILD217T CTRDC 100 120 % PART TYP. % % SWITCHING CHARACTERISTICS PARAMETER SYMBOL MIN. Turn-on time IC = 2 mA, RL = 100 , VCC = 5 V TEST CONDITION MAX. UNIT ton 5 s Turn-off time IC = 2 mA, RL = 100 , VCC = 5 V toff 4 s SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. Climatic classification (according to IEC 68 part 1) TYP. MAX. UNIT 55/100/21 Comparative tracking index CTI 175 399 VIOTM 6000 V VIORM 560 V PSO 350 mW ISI 150 mA TSI 165 C Creepage 4 Clearance 4 mm 0.2 mm Insulation thickness, reinforced rated per IEC60950 2.10.5.1 mm Note As per IEC60747-5-2, 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. Document Number: 83647 Rev. 1.7, 19-Nov-07 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 3 ILD205T/206T/207T/211T/213T/217T Vishay Semiconductors Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 package TYPICAL CHARACTERISTICS Tamb = 25 C, unless otherwise specified 1.2 If - LED Current (mA) 25 NCTRce - normalized CTRce 30 85 C 20 60 C 15 25 C 10 5 0.8 1.0 1.2 0.2 I F = 1 mA 0.8 0.6 I F = 5 mA 0.4 0.2 I F = 1 mA 0.0 VCE 60 80 100 TA - Temperature (C) 6 10 4 8 - Collector To Emitter Voltage (V) 12 10 3 Switching Speed (s) Coll Current Normalized at I F = 10 mA VCE = 10 V I F = 10 mA 2 40 Fig. 4 - Current Transfer Ratio (normalized) vs. Ambient Temperature I F = 10 mA Pulse Width = 100 ms Duty Cycle = 50 % t off 10 2 t on 10 1 10 0 0.1 1 10 RI - Load Resistor (k) iild205t_05 100 Fig. 5 - Switching Speed vs. Load Resistor Fig. 2 - Collector Emitter Current vs. VCE 1.2 1 CTR normalized at I F = 10 mA 1.0 0.8 VCE = 5 V 0.6 0.4 VCE = 0.4 V 0.2 Iceo-Leakage Current - (A) NCTRce - Normalized CTRce I F = 5 mA 0.4 20 1.2 NIc Normalized Collector Current 0.6 iild205t_04 Fig. 1 - Forward Current vs. Forward Voltage iild205t_02 I F = 10 mA 0.8 1.4 Vf - LED Forward Voltage (V) iild205t_01 0 1.0 0.0 0 0.6 1.0 CTR nonsat normalized at IF = 10 mA VCE = 10 V VCE = 50 V 0.1 0.01 VCE = 10 V 0.001 0.0 0.01 iild205t_03 0.1 1 10 I F - LED Current (mA) Fig. 3 - Normalized CTRCE vs. Forward Current www.vishay.com 4 100 20 iild205t_06 40 60 80 100 Ta - Temperature (C) Fig. 6 - Collector Current vs. Ambient Temperature For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83647 Rev. 1.7, 19-Nov-07 ILD205T/206T/207T/211T/213T/217T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 package Vishay Semiconductors Package Power Dissipation (mw) 200 Total pkg 150 100 50 per channel 0 25 iild205t_07 50 75 100 125 TA - Ambient Temperature (C) Fig. 7 - Power Dissipation vs. Ambient Temperature Input toff ton V CC = 5 V Input RL V OUT tpdoff tpdon Output td tr ts 10 % tr 10 % 50 % 50 % 90 % 90 % iild205t_08 Fig. 8 Switching Test Circuit Document Number: 83647 Rev. 1.7, 19-Nov-07 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 5 ILD205T/206T/207T/211T/213T/217T Vishay Semiconductors Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 package PACKAGE DIMENSIONS in inches (millimeters) 0.120 0.002 (3.05 0.05) R 0.010 (0.13) 0.050 (1.27) 0.014 (0.36) CL 0.154 0.002 (3.91 0.05) 0.240 (6.10) 0.036 (0.91) 0.045 (1.14) 0.170 (4.32) 0.260 (6.6) 0.016 (0.41) Pin One I.D. 7 0.015 0.002 0.230 0.002 ISO Method A (0.38 0.05) (5.84 0.05) 0.004 (0.10) 0.008 (0.20) 0.008 (0.20) 0.050 (1.27) typ. 0.040 (1.02) i178020 www.vishay.com 6 40 0.020 0.004 (0.51 0.10) 2 plcs. 5 Max. R0.010 (0.25) max. For technical questions, contact: optocoupler.answers@vishay.com 0.0585 0.002 (1.49 0.05) 0.125 0.002 (3.18 0.05) Lead coplanarity 0.001 max. Document Number: 83647 Rev. 1.7, 19-Nov-07 ILD205T/206T/207T/211T/213T/217T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 package Vishay Semiconductors OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Document Number: 83647 Rev. 1.7, 19-Nov-07 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 7 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1