www.vishay.com For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83647
2Rev. 1.7, 19-Nov-07
ILD205T/206T/207T/211T/213T/217T
Vishay Semiconductors Optocoupler, Phototransistor Output,
Dual Channel, SOIC-8 package
Notes
(1) Tamb = 25 °C, unless otherwise specified.
Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum
Rating for extended periods of the time can adversely affect reliability.
(2) Refer to reflow profile for soldering conditions for surface mounted devices.
Note
Tamb = 25 °C, unless otherwise specified.
Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
ABSOLUTE MAXIMUM RATINGS (1)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Peak reverse voltage VR6V
Peak pulsed voltage 1 µs, 300 pps 1 A
Continuous forward current per channel 30 mA
Power dissipation Pdiss 50 mW
Derate linearly from 25 °C 0.66 mW/°C
OUTPUT
Collector emitter breakdown voltage BVCEO 70 V
Emitter collector breakdown voltage BVECO 7V
Power dissipation per channel Pdiss 125 mW
Derate linearly from 25 °C 1.67 mW/°C
COUPLER
Isolation test voltage t = 1 s VISO 4000 VRMS
Total package dissipation ambient
(2 LEDs and 2 detectors, 2 channels) Ptot 300 mW
Derate linearly from 25 °C 4mW/°C
Storage temperature Tstg - 55 to + 150 °C
Operating temperature Tamb - 55 to + 100 °C
Soldering time from 260 °C (2) Tsld 10 s
ELECTRICAL CHARACTERISTCS
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage IF = 10 mA VF1.2 1.55 V
Reverse current VR = 6 V IR0.1 100 µA
Capacitance VR = 0 V CO25 pF
OUTPUT
Collector emitter breakdown voltage IC = 10 µA BVCEO 70 V
Emitter collector breakdown voltage IE = 10 µA BVECO 7V
Collector emitter leakage current VCE = 10 V, IF = 0 A ICEO 550nA
Collector emitter capacitance VCE = 0 V CCE 10 pF
COUPLER
Collector emitter saturation voltage IF = 10 mA, IC = 2.5 mA VCEsat 0.4 V
Capacitance (input to output) CIO 0.5 pF
Resistance (input to output) RIO 100 GΩ