US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest infor
mation.
SMT Power Inductors
–
DO1608C
Document 177-1
DCR SRF Irms (A)5
Part L2 % max typ Isat4 20°C 40°C
number1 (µH) tol3 (Ohms) (MHz) (A) rise rise
DO1608C-102ML_ 1.0 20 0.05 130 2.9 1.90 2.70
DO1608C-152ML_ 1.5 20 0.06 115 2.6 1.90 2.65
DO1608C-222ML_ 2.2 20 0.07 100 2.3 1.85 2.55
DO1608C-272ML_ 2.7 20 0.08 75 2.1 1.80 2.45
DO1608C-332ML_ 3.3 20 0.08 70 2.0 1.60 2.20
DO1608C-472ML_ 4.7 20 0.09 50 1.5 1.40 1.90
DO1608C-682ML_ 6.8 20 0.13 45 1.2 1.20 1.60
DO1608C-822ML_ 8.2 20 0.16 40 1.15 1.10 1.55
DO1608C-103ML_ 10 20 0.16 35 1.10 1.10 1.50
DO1608C-153ML_ 15 20 0.23 30 0.90 0.90 1.25
DO1608C-223_L_ 22 20,10 0.37 20 0.70 0.75 0.95
DO1608C-333_L_ 33 20,10 0.51 15 0.58 0.60 0.80
DO1608C-473_L_ 47 20,10 0.64 14 0.50 0.52 0.70
DO1608C-683_L_ 68 20,10 0.86 11 0.40 0.44 0.60
DO1608C-104_L_ 100 20,10 1.27 9.0 0.31 0.37 0.50
DO1608C-154_L_ 150 20,10 2.00 6.0 0.27 0.28 0.39
DO1608C-224_L_ 220 20,10 3.11 5.5 0.22 0.23 0.31
DO1608C-334_L_ 330 20,10 3.80 5.0 0.18 0.22 0.30
DO1608C-474_L_ 470 20,10 5.06 4.0 0.16 0.20 0.26
DO1608C-684_L_ 680 20,10 9.20 3.0 0.14 0.14 0.19
DO1608C-105_L_ 1000 20,10 13.8 2.0 0.10 0.11 0.15
1. Please specify tolerance, termination and packaging codes:
DO1608C-105MLC
Tolerance: K = 10%, M = 20% (Table shows stock
tolerances in bold.)
Termination: L = RoHS compliant gold over nickel over
moly-manganese.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead
(63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 em-
bossed plastic tape (750 parts per full
reel).
B = Less than full reel. In tape, but not
machine ready.
To have a leader and trailer added ($25
charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 em-
bossed plastic tape (2500 parts per full
reel).
2. Tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP
4263B LCR meter or equivalent.
3. Tolerances in bold are stocked for immediate shipment
4. DC current at which the inductance drops 10% (typ) from
its value without current.
5. Current that causes the specified temperature rise from 25°C
ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before
soldering.
Document 177-1 Revised 08/16/12
Designer’s Kit C377 contains 3 of each stocked part
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant gold over nickel over moly-manganese.
Other terminations available at additional cost.
Weight 128 – 164 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide,
0.28 mm thick, 4 mm pocket spacing, 3 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
• High energy storage and very low resistance
• Defense Supply Center CID A-A-59742
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest infor
mation.
SMT Power Inductors – DO1608C Series
Typical L vs Frequency Typical L vs Current
Document 177-2
Document 177-2 Revised 08/16/12
Irms Derating
Dimensions are in inches
mm
0.1
1
10
100
1000
10000
Inductance (µH)
0.01 0.1
11
0
Frequency (MHz)
1000 µH
100 µH
10 µH
1µH
0.01 0.1
110
Current (A)
0.1
1
10
100
1000
10000
Inductance (µH)
100 µH
10 µH
1µH
1000 µH
XXX
0.260
6,60 max
0.175
4,45 max 0.090
2,29
0.040
1,02
min
0.170
4,32
0.050
1,27
Dash
number
0.155
3,94 dia
0.115
2,92 max
XXX
0.070
1,78
Recommended
Land Pattern
0.140
3,56
0.055
1,40
0.215
5,46
Part marking since Feb. 2005. Partsmanufactured
prior to that date mayhave color dots.
Visit www.coilcraft.com/colrpowr.cfm
forcolor dot marking details.
-40 -20 020406080100 140120
Ambient temperature (°C)
120
110
100
90
80
70
60
50
40
30
20
10
0
25°C
Percent of rated rmsI
