1. Product profile
1.1 General description
PNP medium power transistor series in Surfa ce-Mounte d Device (SMD) plastic p ackages.
[1] Valid for all available selection groups.
1.2 Features and benefits
High current
Three current gain selections
High power dissipation capability
Exposed heatsink for excellent thermal and electrical conductivity (SOT89, SOT1061)
Leadless very small SMD plas tic package with medium power capability (SOT1061)
AEC-Q101 qualified
1.3 Applications
Linear voltage regulators
High-side switches
Battery-driven devices
Power management
MOSFET drivers
Amplifiers
1.4 Quick reference data
BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
Rev. 9 — 13 October 2011 Product data sheet
Table 1. Product overview
Type number[1] Package NPN complement
NXP JEITA JEDEC
BCP51 SOT223 SC-73 - BCP54
BCX51 SOT89 SC-62 TO-243 BCX54
BC51PA SOT1061 - - BC54PA
Table 2. Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
VCEO collector-emitter voltage open base - - 45 V
ICcollector current - - 1A
ICM peak collector current single pulse; tp1ms - - 2A
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 2 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
2. Pinning information
hFE DC current gain VCE =2V;
IC=150 mA 63 - 250
hFE selection -10 VCE =2V;
IC=150 mA 63 - 160
hFE selection -16 VCE =2V;
IC=150 mA 100 - 250
Table 2. Quick reference data …continued
Symbol Parameter Conditions Min Typ Max Unit
Table 3. Pinning
Pin Description Simplified outline Graphic symbol
SOT223
1base
2 collector
3emitter
4 collector
SOT89
1emitter
2 collector
3base
SOT1061
1base
2emitter
3 collector
132
4
sym028
2, 4
3
1
321
006aaa231
2
1
3
Transparent top view
12
3
sym013
3
2
1
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 3 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
3. Ordering information
[1] Valid for all available selection groups.
4. Marking
Tabl e 4. Ordering information
Type number[1] Package
Name Description Version
BCP51 SC-73 plastic surface-mounted package with increased
heatsink; 4 leads SOT223
BCX51 SC-62 plastic surface-mounted package; collector pad for good
heat transfer; 3 leads SOT89
BC51PA HUSON3 plastic thermal enhanced ultra thin small outline
package; no leads; 3 terminals; body 2 20.65 mm SOT1061
Table 5. Marking codes
Type number Marking code
BCP51 BCP51
BCP51-10 BCP51/10
BCP51-16 BCP51/16
BCX51 AA
BCX51-10 AC
BCX51-16 AD
BC51PA BP
BC51-10PA BQ
BC51-16PA BR
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 4 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
5. Limiting values
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 1 cm2.
[3] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 6 cm2.
[4] Device mounted on an FR4 PCB, 4-layer copper, tin-plated and standard footprint.
[5] Device mounted on an FR4 PCB, 4-layer copper, tin-plated, mounting pad for collector 1 cm2.
Table 6. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VCBO collector-base voltage open emitter - 45 V
VCEO collector-emitter voltage open base - 45 V
VEBO emitter-base voltage open collector - 5V
ICcollector current - 1A
ICM peak collector current single pulse;
tp1ms -2A
IBbase current - 0.3 A
IBM peak base current single pulse;
tp1ms -0.3 A
Ptot total power dissipation Tamb 25 C
BCP51 [1] -0.65W
[2] -1.00W
[3] -1.35W
BCX51 [1] -0.50W
[2] -0.95W
[3] -1.35W
BC51PA [1] -0.42W
[2] -0.83W
[3] -1.10W
[4] -0.81W
[5] -1.65W
Tjjunction temperature - 150 C
Tamb ambient temperature 55 +150 C
Tstg storage temperature 65 +150 C
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 5 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
(1) FR4 PCB, mounting pad for collector 6 cm2
(2) FR4 PCB, mounting pad for collector 1 cm2
(3) FR4 PCB, standard footprint
(1) FR4 PCB, mounting pad for collector 6 cm2
(2) FR4 PCB, mounting pad for collector 1 cm2
(3) FR4 PCB, standard footprint
Fig 1. Power derating curves SOT223 Fig 2. Power derating curves SOT89
(1) FR4 PCB, 4-layer copper, mounting pad for collector 1 cm2
(2) FR4 PCB, single-sided copper, mounting pad for collector 6 cm2
(3) FR4 PCB, single-sided copper, mounting pad for collector 1 cm2
(4) FR4 PCB, 4-layer copper, standard footprint
(5) FR4 PCB, single-sided copper, standard footprint
Fig 3. Power derating curves S OT 10 6 1
Tamb (°C)
–75 17512525 75–25
006aac674
0.5
1.0
1.5
Ptot
(W)
0.0
(1)
(2)
(3)
Tamb (°C)
–75 17512525 75–25
006aac675
0.5
1.0
1.5
Ptot
(W)
0.0
(1)
(2)
(3)
Tamb (°C)
–75 17512525 75–25
006aac676
1.0
0.5
1.5
2.0
Ptot
(W)
0.0
(1)
(2)
(3)
(4)
(5)
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 6 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
6. Thermal characteristics
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 1 cm2.
[3] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 6 cm2.
[4] Device mounted on an FR4 PCB, 4-layer copper, tin-plated and standard footprint.
[5] Device mounted on an FR4 PCB, 4-layer copper, tin-plated, mounting pad for collector 1 cm2.
Table 7. Thermal characteris tics
Symbol Parameter Conditions Min Typ Max Unit
Rth(j-a) thermal resistance from
junction to ambient in free air
BCP51 [1] --192K/W
[2] --125K/W
[3] --93K/W
BCX51 [1] --250K/W
[2] --132K/W
[3] --93K/W
BC51PA [1] --298K/W
[2] --151K/W
[3] --114K/W
[4] --154K/W
[5] --76K/W
Rth(j-sp) thermal resistance from
junction to solder poi nt
BCP51 - - 16 K/W
BCX51 - - 16 K/W
BC51PA - - 20 K/W
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 7 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
FR4 PCB, standard footprint
Fig 4. Transient thermal impedance from junc tio n to ambient as a function of pulse duration for SO T223;
typical values
FR4 PCB, mounting pad for collector 1 cm2
Fig 5. Transient thermal impedance from junc tio n to ambient as a function of pulse duration for SO T223;
typical values
006aac677
10
1
102
103
Zth(j-a)
(K/W)
10–1
10–5 1010–2
10–4 102
10–1 tp (s)
10–3 103
1
0
duty cycle = 1
0.01
0.02
0.05 0.1
0.2 0.33
0.5 0.75
006aac678
10
1
102
103
Zth(j-a)
(K/W)
10–1
10–5 1010–2
10–4 102
10–1 tp (s)
10–3 103
1
0
duty cycle = 1
0.01
0.02
0.05 0.1
0.2 0.33
0.5 0.75
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 8 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
FR4 PCB, mounting pad for collector 6 cm2
Fig 6. Transient thermal impedance from junc tio n to ambient as a function of pulse duration for SO T223;
typical values
FR4 PCB, standard footprint
Fig 7. Transient thermal impedance from junction to ambient as a function of pulse duration for SOT89;
typical values
006aac679
10
1
102
103
Zth(j-a)
(K/W)
10–1
10–5 1010–2
10–4 102
10–1 tp (s)
10–3 103
1
0
duty cycle = 1
0.01
0.02
0.05 0.1
0.2 0.33
0.5 0.75
006aac680
10
1
102
103
Zth(j-a)
(K/W)
10–1
10–5 1010–2
10–4 102
10–1 tp (s)
10–3 103
1
0
duty cycle = 1
0.01
0.02
0.05 0.1
0.2 0.33
0.5 0.75
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 9 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
FR4 PCB, mounting pad for collector 1 cm2
Fig 8. Transient thermal impedance from junction to ambient as a function of pulse duration for SOT89;
typical values
FR4 PCB, mounting pad for collector 6 cm2
Fig 9. Transient thermal impedance from junction to ambient as a function of pulse duration for SOT89;
typical values
006aac681
10
1
102
103
Zth(j-a)
(K/W)
10–1
10–5 1010–2
10–4 102
10–1 tp (s)
10–3 103
1
0
duty cycle = 1
0.01
0.02
0.05 0.1
0.2 0.33
0.5 0.75
006aac682
10
1
102
103
Zth(j-a)
(K/W)
10–1
10–5 1010–2
10–4 102
10–1 tp (s)
10–3 103
1
0
duty cycle = 1
0.01
0.05
0.1
0.2 0.33
0.5 0.75
0.02
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 10 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
FR4 PCB, single-sided copper, standard footprint
Fig 10. Transient thermal impedance from junction to ambient as a function of pulse duration for SOT1061;
typical values
FR4 PCB, single-sided copper, mounting pad for collector 1 cm2
Fig 11. Transient thermal impedance from junction to ambient as a function of pulse duration for SOT1061;
typical values
006aac683
10
1
102
103
Zth(j-a)
(K/W)
10–1
10–5 1010–2
10–4 102
10–1 tp (s)
10–3 103
1
0
duty cycle = 1
0.01
0.05
0.1 0.2
0.33
0.5 0.75
0.02
0.25
006aac684
10
1
102
103
Zth(j-a)
(K/W)
10–1
10–5 1010–2
10–4 102
10–1 tp (s)
10–3 103
1
0
duty cycle = 1
0.01
0.05
0.1 0.2
0.33
0.5 0.75
0.02
0.25
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 11 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
FR4 PCB, single-sided copper, mounting pad for collector 6 cm2
Fig 12. Transient thermal impedance from junction to ambient as a function of pulse duration for SOT1061;
typical values
FR4 PCB, 4-layer copper, standard footprint
Fig 13. Transient thermal impedance from junction to ambient as a function of pulse duration for SOT1061;
typical values
006aac685
10
1
102
103
Zth(j-a)
(K/W)
10–1
10–5 1010–2
10–4 102
10–1 tp (s)
10–3 103
1
0
duty cycle = 1
0.01
0.05
0.1 0.2
0.33
0.5 0.75
0.02
0.25
006aac686
10
1
102
103
Zth(j-a)
(K/W)
10–1
10–5 1010–2
10–4 102
10–1 tp (s)
10–3 103
1
0
duty cycle = 1
0.01
0.05
0.1 0.2
0.33
0.5 0.75
0.02
0.25
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 12 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
7. Characteristics
[1] Pulse test: tp300 s; = 0.02.
FR4 PCB, 4-layer copper, mounting pad for collector 1 cm2
Fig 14. Transient thermal impedance from junction to ambient as a function of pulse duration for SOT1061;
typical values
006aac687
10
1
102
103
Zth(j-a)
(K/W)
10–1
10–5 1010–2
10–4 102
10–1 tp (s)
10–3 103
1
0
duty cycle = 1
0.01
0.05
0.1 0.2
0.33
0.5 0.75
0.02
0.25
Table 8. Characteristics
Tamb =25
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
ICBO collector-base
cut-off current VCB =30 V; IE=0A - - 100 nA
VCB =30 V; IE=0A;
Tj= 150 C--10 A
IEBO emitter-base
cut-off current VEB =5V; I
C=0A - - 100 nA
hFE DC current gain VCE =2V
IC=5mA 63 - -
IC=150 mA 63 - 250
IC=500 mA [1] 40 - -
DC current ga in VCE =2V
hFE selection -10 IC=150 mA 63 - 160
hFE selection -16 IC=150 mA 100 - 250
VCEsat collector-emitter
saturation voltage IC=500 mA;
IB=50 mA [1] --0.5 V
VBE base-emitter vo ltage VCE =2V; I
C=500 mA [1] --1V
Cccollector capacitance VCB =10 V; IE=i
e=0A;
f=1MHz -15-pF
fTtransition frequency VCE =5V; I
C=50 mA;
f=100MHz - 145 - MHz
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 13 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
VCE =2V
(1) Tamb = 100 C
(2) Tamb =25C
(3) Tamb =55 C
Tamb =25C
Fig 15. DC current gain as a function of collector
current; typical values Fig 16. Collector current as a function of
collector-emitter voltage; typical values
VCE =2V
(1) Tamb =55 C
(2) Tamb =25C
(3) Tamb = 100 C
IC/IB=10
(1) Tamb = 100 C
(2) Tamb =25C
(3) Tamb =55 C
Fig 17. Ba se-emitter voltage as a function of collector
current; typical values Fig 18. Collector- em itter saturatio n voltage as a
function of collector current; typical values
006aac688
100
200
300
hFE
0
IC (A)
–10–4 –10–1–10–3 –10–1
–10–2
(1)
(2)
(3)
006aac689
–0.4
–0.8
–1.2
VBE
(V)
0.0
IC (mA)
–10–1 –104
–103
–1 –102
–10
(1)
(2)
(3)
006aac690
–1
–10–1
–10
VCEsat
(V)
–10–2
IC (mA)
–10–1 –104
–103
–1 –102
–10
(1)
(2)
(3)
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 14 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
8. Test information
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.
9. Package outline
Fig 19. Package outline SOT223 (SC-73)
Fig 20. Package outline SOT89 (SC-62/TO-243)
04-11-10Dimensions in mm
6.7
6.3
3.1
2.9
1.8
1.5
7.3
6.7 3.7
3.3
1.1
0.7
132
4
4.6
2.3 0.8
0.6 0.32
0.22
06-08-29Dimensions in mm
4.6
4.4
1.8
1.4
1.6
1.4
1.2
0.8
3
1.5 0.48
0.35 0.44
0.23
0.53
0.40
2.6
2.4 4.25
3.75
123
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 15 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
10. Packing information
[1] For further information and the availability of packing methods, see Section 14.
[2] Valid for all available selection groups.
[3] T1: normal taping
[4] T3: 90 rotated taping
Fig 21. Package outline SOT1061 (HUSON3)
09-11-12Dimensions in mm
0.65
max
2.1
1.9
1.6
1.4
0.35
0.25 0.45
0.35
2.1
1.9
1.1
0.9
0.3
0.2
1.05
0.95
1.3
2
3
1
Table 9. Packing methods
The indicated -xxx are the last thre e digits of the 12NC ordering code.[1]
Type
number[2] Package Description Packing quantity
1000 3000 4000
BCP51 SOT223 8 mm pitch, 12 mm tape and reel -115 - -135
BCX51 SOT89 8 mm pitch, 12 mm tape and reel; T1 [3] -115 - -135
8 mm pitch, 12 mm tape and reel; T3 [4] -146 - -
BC51PA SOT1061 4 mm pitch, 8 mm tape and reel - -115 -
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 16 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
11. Soldering
Fig 22. Reflow soldering footprint SOT223 (SC-73)
Fig 23. W ave soldering footprint SOT223 (SC-73)
sot223_fr
1.2
(4×)
1.2
(3×)
1.3
(4×)
1.3
(3×)
6.15
7
3.85
3.6
3.5
0.3
3.9 7.65
2.3 2.3
6.1
4
231
solder lands
solder resist
occupied area
solder paste
Dimensions in mm
sot223_fw
1.9
6.7
8.9
8.7
1.9
(3×)
1.9
(2×)
1.1
6.2
2.7 2.7
2
4
31
solder lands
solder resist
occupied area
preferred transport
direction during soldering
Dimensions in mm
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 17 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
Fig 24. Reflow soldering footp rint SOT 89 (SC-62/TO-243)
Fig 25. W ave soldering footprint SOT89 (SC-62/TO-243)
solder lands
solder resist
occupied area
solder paste
sot089_fr
1.2
1.9
2
2.25
4.75
1
(3×)
0.7
(3×)
0.6
(3×)
1.1
(2×)
1.2
0.85 0.2
0.5
1.7
4.85
3.95
4.6
1.51.5
Dimensions in mm
solder lands
solder resist
occupied area
preferred transport direction during soldering
sot089_fw
0.7
5.3
6.6
2.4
3.5
0.5
1.8
(2×)
1.5
(2×)
7.6
1.9 1.9
Dimensions in mm
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 18 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
Reflow soldering is the only recommended soldering method.
Fig 26. Reflow soldering footp rint SOT 1061 (HUSON3)
occupied area
solder paste = solder lands Dimensions in mm
sot1061_fr
solder resist
0.4
2.1
1.3
0.25
0.25 0.25
1.1 1.2
0.55
0.6
2.3
0.5 (2×)
0.5 (2×) 0.6 (2×)
0.4 (2×)
0.5
1.6
1.7
1.05
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 19 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
12. Revision history
Table 10. Revision history
Document ID Release date Data sheet status Change notice Supersedes
BCP51_BCX51_BC51PA v.9 20111013 Product data sheet - BC636_BCP51_BCX51 v.8
Modifications: Deleted type number BC636
Added Type number BC51PA
Section 1 “Product profile: updated
Table 6 and 7: updated according to latest measurements
Figure 1 to 9, 15, 17, 18 and 21: updated
Figure 10 to 14: added
Section 8 “Test information: added
Section 11 “Soldering: added
Section 13 “Legal information: updated
BC636_BCP51_BCX51 v.8 20080222 Product data sheet - BC636_BCP51_BCX51 v.7
BC636_BCP51_BCX51 v.7 20070629 Product data sheet - BC636_BCP51_BCX51 v.6
BC636_BCP51_BCX51 v.6 20060329 Product data sheet - BC636_638_640 v.5
BCP51_52_53 v.5
BCX51_52_53 v.4
BC636_638_640 v.5 20041011 Product specification - BC636_638_640 v.4
BCP51_52_53 v.5 20030206 Product specification - BCP51_52_53 v.4
BCX51_52_53 v.4 20011010 Product specification - BCX51_52_53 v.3
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 20 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
13. Legal information
13.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of de vice(s) descr ibed in th is docume nt may have cha nged since this docume nt was publis hed and ma y dif fer in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liab ility for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and tit le. A short data sh eet is intended
for quick reference only and shou ld not be rel ied u pon to cont ain det ailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall pre vail.
Product specificat io nThe information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to off er functions and qualities beyond those described in the
Product data sheet.
13.3 Disclaimers
Limited warr a nty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequ ential damages (including - wit hout limitatio n - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ ag gregate and cumulative l iability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semicondu ctors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all informa tion supplied prior
to the publication hereof .
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suit able for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in perso nal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liab ility for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty tha t such application s will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and ope ration of their applications
and products using NXP Semiconductors product s, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suit able and fit for the custome r’s applications and
products planned, as well as fo r the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability rela ted to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for th e customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanent ly and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individua l agreement. In case an individual
agreement is concluded only the ter ms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing i n this document may be interpreted or
construed as an of fer t o sell product s that is open for accept ance or t he grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulatio ns. Export might require a prior
authorization from competent authorities.
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.
Product [short] dat a sheet Production This document contains the product specification.
BCP51_BCX51_BC51PA All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 9 — 13 October 2011 21 of 22
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
Quick reference data The Quick reference data is an extract of the
product data given in the Limiting values and Characteristi cs sections of this
document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All referenced b rands, produc t names, service names and trademarks
are the property of their respect i ve ow ners.
14. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
NXP Semiconductors BCP51; BCX51; BC51PA
45 V, 1 A PNP medium power transistors
© NXP B.V. 2011. All rights reserved.
For more information, please visit: http://www.nxp.co m
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 13 October 2011
Document identifier: BCP51_BCX51_BC51PA
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
15. Contents
1 Product profile. . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 3
4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4
6 Thermal characteristics . . . . . . . . . . . . . . . . . . 6
7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . 12
8 Test information. . . . . . . . . . . . . . . . . . . . . . . . 14
8.1 Quality information . . . . . . . . . . . . . . . . . . . . . 14
9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 14
10 Packing information . . . . . . . . . . . . . . . . . . . . 15
11 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 19
13 Legal information. . . . . . . . . . . . . . . . . . . . . . . 20
13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 20
13.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
13.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 20
13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 21
14 Contact information. . . . . . . . . . . . . . . . . . . . . 21
15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22