MICRODOT and NANONICS Connectors
Tyco Electronics Corporation
Harrisburg, Pennsylvania
www.tycoelectronics.com
1308638 10M GIC CGX 8-05
MICRODOT and
NANONICS Connectors
MICRODOT and NANONICS Connectors
© Copyright 2001 and 2005 by
Tyco Electronics Corporation.
All Rights Reserved.
COMBOMATE, DUALOBE, JACKMATE,
LEPRA/CON, MARC 53, MARC 63,
MARC 73, MICRODOT,NANONICS,
and TYCO aretrademarks.
Other products, logos, and Company
names mentioned herein may be
trademarks of their respective owners.
Disclaimer
While Tyco Electronics has made every
reasonable effort to ensure the accuracy
of the information in this catalog, Tyco
Electronics does not guarantee that it is
error-free, nor does Tyco Electronics make
any other representation, warranty, or
guarantee that the information is accurate,
correct, reliable or current. Tyco
Electronics reserves the right to make any
adjustments to the information contained
herein at any time without notice. Tyco
Electronic expressly disclaims all implied
warranties regarding the information
contained herein, including but not limited
to any implied warranties or merchantabili-
ty or fitness for a particular purpose.
It is recommended that you test any new
or replacement product before incorporat-
ing into a system.
The dimensions in this catalog are for
reference purposes only and are subject to
change without notice. Dimensions are in
inches over [millimeters], unless other-
wise specified. Always consult our
customer drawings for recommended PC
board layout and panel cutout dimensions;
do not use catalog dimensions.
Specifications aresubject to change with-
out notice.
Consult Tyco Electronics at 1-800-522-
6752 for latest dimensions and design
specifications, or use our global contact
list shown on inside back cover.
MICRODOT ConnectorsNANONICS Connectors
MICRODOT and NANONICS Connectors
i
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Main Table of Contents
i
DUALOBE Rectangular Connectors . . . . . . . . . . . . . . . . . . . . 141-178
Circular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179-196
Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197-206
Strip Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207-214
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215-218
Microminiature D Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . 5-35
Rectangular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-54
Circular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-90
Coaxial Connectors................................91-136
MICRODOTNANONICS
MICRODOT and NANONICS Connectors
Engineering Notes
ii Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
ii
MICRODOT Connectors
Table of Contents
1
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microdot Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Microminiature D Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-35
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
MCK/MCD/MCDM Series Metal and Plastic Shell Connectors. . . . . . . . . . . . . . . . . . . . . . 6
How To Specify MCK and MCD Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
MCK Series Metal Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
MCK Series Metal Shell Connectors Panel Mounting — Cutout Dimensions . . . . . . . . . . 10
MCD Series Plastic Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 12
MCD Series Plastic Shell Connectors Panel Mounting — Cutout Dimensions . . . . . . . . . 13
Mounting and Coupling Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
MCK Transition Blocks
RT1 — Right Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-18
ST1 — Straight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-21
MCK ST2 Series Straight Mount PCB Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-24
MCDM Series Metal Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 26
MCDM Series Metal Shell RF COMBOMATE Connectors . . . . . . . . . . . . . . . . . . . . . . 27-29
MCDM Series Metal Shell Connectors Panel Mounting — Cutout Dimensions . . . . . . . . 30
MIL-DTL-83513 Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-35
Rectangular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-54
Introduction .............................................................37
TWIST Pin Contact Data ..................................................38
MCE Plastic
MCE Series Plastic Shell EdgeboardConnectors...........................39-41
Technical & Performance Data...........................................39
Mother Board & Daughter Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
How To Specify. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
MCEM Metal Shell
MCEM Series Metal Shell EdgeboardConnectors ..........................42-45
Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
128 Layout Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43, 44
How ToSpecify.......................................................44
184 Layout Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
MCJ Plastic
MCJ Series Plastic Shell Center Jackscrew Connectors . . . . . . . . . . . . . . . . . . . . . 46, 47
10 & 14 Layout Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
26, 38 & 46 Layout Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
How ToSpecify.......................................................47
Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
MCJM Metal Shell
MCJM Series Metal Shell Center Jackscrew Connectors. . . . . . . . . . . . . . . . . . 46, 48, 49
Technical & Performance Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Plug & Receptacle Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 49
How To Specify. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
MICRODOT Connectors
Table of Contents (Continued)
2Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
MCS .050 [1.27] Centerline
MCS Series Strip Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Strip Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
How To Specify. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
High Density Standard Module (HDSM) Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . 51-54
Circular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-92
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 56
MARC 43
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Materials and Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Test Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Polarizing Key Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Shell Configurations..................................................60-62
Cable Clamps, Contacts, Sealing Plugs,
Protective Covers & Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
MARC 53
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Materials and Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Test Data.............................................................66
Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Polarizing Key Positions .................................................68
Shell Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69-71
Test Adapters, Protective Covers, Cable Clamps
&Modifications....................................................72, 73
MARC 63
Performance Data......................................................74
PartNumber & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Shell Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75, 76
Cable Clamps, Protective Covers & Modifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MARC 43, 53, 63
Contacts & Sealing Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-80
MARC 43, 53, 63, 73
Assembly Tools........................................................81
MARC 73
Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 83
PartNumber & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Shell Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 85
Cable Clamps, Contacts & Sealing Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85, 86
MQR Series – MicrominiatureCircular Connectors...........................87, 88
MTC Series – Microminiature Circular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 90
MICRODOT Connectors
Table of Contents (Continued)
3
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91-136
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Standard Coaxial Connectors
Performance Data/Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Screw-On Series (S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93-98
Slide-On Series (SOS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99-102
Quick-Connect Series (QC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103-105
Twinax Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Triax Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Module Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Caps For Screw-On Jacks and Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Feed Thru Adapters, Screw-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
BNC/TNC Adapters to:
Screw-On Series (S). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110, 111
Slide-On Series (SOS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Quick-Connect (QC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Gold Plated Crimp Style Coaxial Connectors
Performance Data/Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Screw-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113-116
Assembly Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
LEPRA/CON Ultra MiniatureConnectors
Performance Data/Materials.............................................117
Screw-On Series — Standard Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118, 119
Screw-On Series — Locking Interface .................................120, 121
Slide-On Series...................................................122, 123
Assembly Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
BNC / LEPRA/CON Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124, 125
Snap-Lock Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Cable Assemblies
Ordering Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Mating Interface Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Cable Acceptance Dimensions
Standard Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129-133
Gold Plated Crimp Style Coaxial Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . 133, 134
LEPRA/CON Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Hermetic Connectors
Coaxial Screw-On, Slide-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135, 136
MICRODOT Connectors
MICRODOT Introduction
4Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
MICRODOT Connector
products have a fifty-year
heritage of leadership in
precision design and manu-
facturing of innovative and
cost-effective interconnects.
These innovative and cost-
effective products offer
interconnect solutions for a
broad range of applications
in the Aerospace, Military,
Medical, Instrumentation,
Communications and
Computer markets.
The MICRODOT reputation
for hands-on experienc
and outstanding technical
support is now enhanced
as part of Tyco Electronics
Corporation.
From standard Mil-Spec
configurations to custom
designs, we have the
Micro-D, subminiature and
ultra-miniature coaxial,
custom hermetic and
space-related cylindrical
connectors to meet your
need, whether it is build-to-
print assemblies, or total
turn-key assembly program
management. MICRODOT
connectors have met the
rigorous demands imposed
in manned space flight,
military and commercial
satellites, critical medical
applications, and geo-
physical exploration.
Microminiature D Connectors
Microminiature D Connectors
5
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
MICRODOT Connectors
MCK and MCD High Density
Microminiature “D”
Connectors described in
this catalog comprise a
complete connector sys-
tem, which is adaptable to
anumerous variety of form
factors. Low engaging force
is achieved by the manner
in which the twist pin
contacts are designed.
By constructing the male
contact as a breathing
helical spring, electrical
contact is achieved at many
points around the periphery
of the pin bundle rather
than at a few discrete
points, as in conventional
pin designs. Normal twist
pin engagement force is
6oz. [1.67N] typically and
8oz. [2.22N] maximum. The
low force twist pins exhibit
an engaging force of 4 oz.
[1.11N] typically and 5 oz.
[1.39N] maximum. Low
force twist pins are standard
in MIL-DTL-83513 configu-
rations of MCK and MCD
connectors and may be
supplied as an option in all
other configurations.
The MCK and MCD Series
of connectors featured in
this catalog aredesigned to
meet the applicable require-
ments of MlL-DTL-83513,
for intermateability,inter-
changeability,and
performance. Designed for
both military and commer-
cial applications, the MCK’s
and MCD’s are especially
well suited for use in minia-
turized airborne and space
electronics, computers, and
test equipment. The metal
shell MCK’s and plastic
shell MCD’s are available
with solder cup, and solid or
stranded wire terminations.
MCK transition blocks are
standardfor printed circuit
boardmounting. Custom
termination configurations
for both MCK and MCD
can be accommodated.
Micro D’s are also supplied
in wired harness assemblies.
Product Facts
nDesigned for both military
and commercial applications
nLow engaging force is
achieved by the manner in
which Twist Pin Contacts are
designed
nThe metal shell and plastic
shell are available with
solder cup and solid or
stranded wire terminations
nMating force maximum is
10 oz. [2.78N] times the
number of contacts
nDurability — No known
mechanical or electrical
issues detrimental to the
function of the connectors
after 500 cycles of mating
and unmating
nCurrent Rating — 3 amps
max per contact
Microminiature D Connectors
MCK/MCD/MCDM Series Metal and Plastic Shell Connectors
6Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Electrical
Contacts —Pin 24 AWG twist pin,
Socket 24 AWG precision machined
barrel, Wire Range 24 AWG to 30 AWG
solid and stranded.
Contact Resistance —(voltage drop)
25 millivolts max. at 3 amps, 77°± 7.4°F
[25°± 3° C].
Current Rating —3amps max. per
contact.
Dielectric Withstanding Voltage —
Volts RMS 60 Hz at room ambient.
At sea level 600V solder pots, 750V wire
terminations & transition blocks.
At 70,000 ft. [21,336 m] 150V solder
pots, 200V wire terminations & transi-
tion blocks.
Insulation Resistance —5,000
megohms min. (@ 500 VDC) at ambient
room temperature.
Magnetic Permeability —2mu max.
Mechanical
Contact Spacing —.050 [1.27mm]
centers.
Contact Engagement &
Separation —Standard contact
engaging force is 6.0 oz. [1.67N] (8.0 oz.
[2.22N] max.). Separation force is 0.5
[.14N] oz. min.
Mating Force Maximum —
Calculated as 10 oz. times the number
of contacts.
Environmental
Temperature Range —
-67°F to 257 ° F [ -55°C to +125°C] for
MCK/MCD, -67°F to 302° F [-55°C to
+150°C] for MCDM.
Vibration —No discontinuity in
excess of 1 µ sec. when tested in accor-
dance with MIL-STD-1344, Method
2005, test Condition IV.
Solderability —Connectors shall
pass the test requirements of MIL-STD-
202, Method 208
Shock —No discontinuity in excess of
1µ sec. when tested in accordance with
MIL-STD-1344, Method 2004, test
Condition E.
Durability —No mechanical or electri-
cal defects detrimental to the function of
the connectors after 500 cycles of mat-
ing and unmating.
Humidity —After exposure to humidi-
ty as specified by MIL-STD-1344,
Method 1002, Type II, IR shall be 1
megohm min. following step 7a of
Method 1002 and 1000 megohms min.
after 24 hours of conditioning per
Method 1002.
Salt Spray —Connectors shall meet
the performance requirements of contact
resistance, mating and unmating forces,
and contact retention after being subject-
ed to the 48-hour 5% solution salt spray
test per MIL-STD-1344, Method 1001,
Condition B.
Fluid Immersion —Unmated con-
nectors after being fully immersed in one
of the following fluids, for the prescribed
time, will mate at a force of 10 oz.
[2.78N] times the number of contacts
or less: Perchloroethylene, 2 hours;
Lubricating oil per MIL-L-23699,
20 hours.
Insert Retention — Inserts will with-
stand a 50 lb. [34N/cm2]per square inch
load in either direction.
Crimp Termination Tensile
Strength —(Unassembled contacts
with crimped stranded wire terminations)
Wires will not pull out of contacts when
the following axial loads are applied:
24 AWG, 5 lbs. [22.24N]; 26 AWG,
4lbs. [17.79N]; 28 AWG, 3 lbs.
[13.34N]
Outgassing — When tested in accor-
dance with SP-R-0022, Total Mass Loss
(TML) shall be less than 1.0% and
Volatile Condensable Material (VCM)
shall be less than 0.1% of the original
specimen.
Materials and Finishes
Contacts —Copper alloy plated with
.000050 [.00127] gold over copper flash
per MIL-G-45204 Type II.
Hardware —see pages 14 and 15.
MCK-Metal Shell —
Insulator — Liquid crystal polymer
(LCP) per ASTM D5138, or
Polyphenylene sulfide GST-40F per
ASTM D5927 or MIL-M-24519
Interfacial Seal — Fluorosilicone Rubber
per MIL-R-25988 (socket side only)
Body Shell — Aluminum alloy-high
grade plated
Cadmium per QQ-P-416
Nickel, electroless per AMS 2404
Transition Block Shell —
Liquid crystal polymer (LCP) per ASTM
D5138, or Polyphenylene sulfide
GST-40F per ASTM D5927 or
MIL-M-24519
Potting Material — Epoxy, Black
MCD-Plastic Shell —
Insulator/Body — Polyester, glass filled
per MIL-M-24519, Liquid crystal
polymer (LCP) per ASTM D5138, or
Polyphenylene sulfide GST-40F per
ASTM D5927 or MIL-M-24519
Wire Terminations —
Solid copper per QQ-W-343 gold plated
per MIL-G-45204
Stranded TEFLON insulated per MIL-W-
16878
Stranded TEFLON insulated per MIL-W-
22759/11, /33
Solid copper per QQ-W-343, solder
dipped (Transition block)
MCDM-Metal Shell —
Insulator — Diallyl Phthalate per MIL-
M-14, Type SDG-F
Body Shell — Aluminum alloy—high
grade, nickel plated
Technical and Performance Data
(Applicable to MCK, MCD and MCDM unless otherwise noted)
MIL-DTL-83513 — Only the descriptive legend in bold italic is applicable to current MIL-DTL-83513 configurations;
MIL-DTL-83513/1 through /4 — MCK metal shell; MIL-DTL-83513/6 through /9 — MCD plastic shell.
In addition, MIL-DTL-83513 solid copper wire termination is specified 25 AWG, 0.5; and 1.0 [25.4] lengths only and
stranded insulated wire termination is specified 26 AWG, 18.0 [457.2] and 36.0 [914.4] lead lengths only. Hardware for
MIL-DTL-83513 configurations is specified separately by the M83513/5-XX designation. M83513/1 through /4 and /6
through /9 specify no hardware (B). Mounting/mating hardware is shown on page 14 with the applicable military
nomenclature. The MICRODOT catalog part number for a MIL-DTL-83513 configuration may be constructed
to include the desired hardware.
See pages 31-35 for M83513/ cross reference.
Twist Pin, Pin and Socket
Contacts
The contact spring member
normally found in socket
contacts has been eliminat-
ed by creating a breathing
helical spring principle on
the pin contact — smaller,
moredurable contacts
can be manufactured
economically.
Wire range 24-36 AWG solid & stranded.
Microminiature D Connectors
How To Specify MCK and MCD Connectors
7
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
Metal Shell
Plastic Shell
MCK- C2 B 37 P 6 A 1 18.0
Lead Length in Inches (Min.)
X — Special, not described by legend.
Insulation Color or Finish
1 — All white wire 6—Bare (unfinished)
2—All yellow wire 7— Color coded per MIL-STD-681, System 1
3—All gray wire 8— Special color code
4—Gold plated9 — 10 Solid color repeating per M-83513
5—Tin dipped gold plated
Wire Type
A—Type E,7strand
B—Type ET,7strand
C—Type E,19 strand
D—Type ET,19 strand
F—7strand per MIL-W-22759/11
(28 AWG only)
G—19 strand per MIL-C-22759/11
(26 AWG only),24 AWG
L— Copper, Solid
(25 AWG only)
Q— Stranded per MIL-W-22759/33
(26 AWG only)
Wire Size
4—24 AWG 5—25 AWG 6 —26 AWG 8—28 AWG 0—30 AWG
Per MIL-W-16878
{
Connector Series
Shell Finish
C1— Cadmium, Clear
C2 — Cadmium, YellowChromate
N1—Nickel, Electroless
Hardware (See Pages 14 and 15)
B—No Hardware
F — Float Bushing
K,KM — Jackscrew, Slotted Head, HighProfile (9-51)
H,HM — Jackscrew, Slotted Head, HighProfile (100)
L, LM —Jackscrew, Slotted Head, LowProfile (9-51)
J,JM —Jackscrew, Slotted Head, LowProfile (100)
Q,QM — Jackscrew,Allen Head, HighProfile (9-51)
T,TM —Jackscrew,Allen Head, HighProfile (100)
R,RM — Jackscrew,Allen Head, LowProfile (9-51)
N,NM — Jackscrew,Allen Head, LowProfile (100)
P—Jackpost Assembly (9-51)
S—Jackpost Assembly (100)
X — Lockscrew, Slotted Head
Y—Lockscrew,Allen Head
Z—Clip and Key (Clip Mount Only)
Layout
9, 15, 21, 25, 31, 37, 51,100
See contact arrangement
Contact Type
P—Pin (Plug)
S—Socket (Receptacle)
S—Solder pots26AWG max.
MCD R3 B 37 P 6 A 1 18.0
Lead Length in Inches (Min.)
X — Special — Does not fit description below.
Insulation Color or Finish
1 — All white wire 6—Bare (unfinished)
2—All yellow wire 7— Color coded per MIL-STD-681, System 1
3—All gray wire 8— Special color code
4—Gold plated9 — 10 Solid color repeating per M-83513
5—Tin dipped gold plated
Wire Type
A—Type E,7strand
B—Type ET,7strand
C—Type E,19 strand
D—Type ET,19 strand
F—7strand per MIL-W-22759/11
(28 AWG only)
G—19 strand per MIL-C-22759/11
(26 AWG only),24 AWG
L— Copper, Solid
(25 AWG only)
Q— Stranded per MIL-W-22759/33
(26 AWG only)
Wire Size
4—24 AWG 5—25 AWG 6 —26 AWG 8—28 AWG 0—30 AWG
Per MIL-W-16878
{
Connector Series
Insulator Type/Material
G2 — Clip Mount, polyester, natural
G3 — ScrewMount, polyester, natural, .093 Flg.
R2 — Clip Mount, Ryton
R3 — Screw MountLiquid CrystalPolymer
orPolyphenyleneSulfide
Hardware (See Pages 14 and 15)
B—No Hardware
F — Float Bushing
K,KM — Jackscrew, Slotted Head, HighProfile
L, LM —Jackscrew, Slotted Head, LowProfile
Q,QM — Jackscrew,Allen Head, HighProfile
R,RM — Jackscrew,Allen Head, LowProfile
P—Jackpost Assembly
X — Lockscrew, Slotted Head
Y—Lockscrew,Allen Head
Z—Clip and Key (Clip Mount Only)
Layout
9, 15, 21, 25, 31, 37, 51
See contact arrangement
Contact Type
P—Pin (Plug)
S—Socket (Receptacle)
S—Solder pots26AWG max.
Note: Items in bold italic are qualified to MIL-DTL-83513.
Microminiature D Connectors
Contact Arrangements
8Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Note: MCK metal shells are not designed to intermate or interchange with MCD plastic shells. If metal/plastic intermating is desired, use MCDM Series Metal
Shell on pages 25 and 26 with MCD Series Plastic Shell on page 11.
113
25
14
119
20 37
5
1
9
6
8
1
915
111
21
12
116
17 31
118
19 35
36 51
1
9
16
24
8
1523
30
26
5175
100
1
27
52
76
100 Contacts
(MCK Only)
37 Contacts 51 Contacts
31 Contacts
30 Contacts
(MCDM Only)
25 Contacts
9Contacts 15 Contacts 21 Contacts
Face View of Pin Insert
(Socket Side is Mirror Image)
Microminiature D Connectors
MCK Series Metal Shell Connectors
9
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
ACE FPart BMax. +.010 [.254] D Max
Number ± .010 [.254] -.018 [.457] ±.010 [.254] ± 005 [.127]
MCK**- 9P*** .775 .3338 .390 .270 .298 .565
19.68 8.48 9.91 6.86 7.57 14.35
MCK**- 9S*** .775 .4018 .390 .270 .298 .565
19.68 10.21 9.91 6.86 7.57 14.35
MCK**- 15P*** .925 .4838 .540 .270 .298 .715
23.50 12.29 13.72 6.86 7.57 18.16
MCK**- 15S*** .925 .5518 .540 .270 .298 .715
23.50 14.02 13.72 6.86 7.57 18.16
MCK**- 21P*** 1.075 .6338 .690 .270 .298 .865
27.30 16.10 17.53 6.86 7.57 21.97
MCK**- 21S*** 1.075 .7018 .690 .270 .298 .865
27.30 18.05 17.53 6.86 7.57 21.97
MCK**- 25P*** 1.175 .7338 .790 .270 .298 .965
29.84 18.64 20.07 6.86 7.57 24.51
MCK**- 25S*** 1.175 .8018 .790 .270 .298 .965
29.84 20.37 20.07 6.86 7.57 24.51
MCK**- 31P*** 1.325 .8838 .940 .270 .298 1.115
33.66 22.45 23.88 6.86 7.57 28.32
MCK**- 31S*** 1.325 .9518 .940 .270 .298 1.115
33.66 24.18 23.88 6.86 7.57 28.32
MCK**- 37P*** 1.475 1.0338 1.090 .270 .298 1.265
37.46 26.26 27.69 6.86 7.57 32.13
MCK**- 37S*** 1.475 1.1018 1.090 .270 .298 1.265
37.46 27.99 27.69 6.86 7.57 32.13
MCK**- 51P*** 1.425 .9838 1.040 .310 .341 1.215
36.20 24.99 26.42 7.87 8.66 30.86
MCK**- 51S*** 1.425 1.0518 1.040 .310 .341 1.215
36.20 26.72 26.42 7.87 8.66 30.86
MCK**- 100P*** 2.160 1.3838 1.432 .360 .384 1.800
54.86 35.15 36.37 9.15 9.75 45.71
MCK**- 100S*** 2.160 1.508 1.432 .360 .384 1.800
54.86 38.30 36.37 9.15 9.75 45.71
P = Pin, S = Socket
Dimensions per
MIL-DTL-83513
Plug
(Pin side)
Receptacle
(Socket side)
F
Contact #1
Pin E
A
Two Mtg. Holes
Pin
B
Pin
D
.183±.003
[4.65±0.08]
.093±.005
[2.36±0.13]
Ø.092±.004
[2.34±0.10]
Ø.145–.150
[3.68 – 3.81]
.406±.010
[10.31±0.25]
C
Crimp or Solder
Crimp or Solder
Socket
Socket Socket
F
Contact #1
E
A
.419±.010
[10.64±0.25]
C
.195±.003
[4.95±0.08]
.093±.005
[2.36±0.13]D
B
(9-51 )
(100 )
Two Mtg. Holes
Ø.092±.004
[2.34±0.10]
Ø.145–.150
[3.68 – 3.81]
(9-51 )
(100 )
Microminiature D Connectors
MCK Series Metal Shell Connectors Panel Mounting — Cutout Dimensions
10 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Panel Mounting
Dimensions —
MCK
Plug and Receptacle
Rear Mounted Plug and Receptacle
Front Mounted Plug Front Mounted
Receptacle Rear Mounted
.200
[5.08]
.395
[10.03] .300
[7.62]
A
A
C
C
B
B
.095
[2.41]
.095
[2.41]
.122
[3.10]
.122
[3.10]
.015
[.381] Max.
Typ.
Full Radius
(Typ.)
Full Radius
(Typ.)
Full Radius
(Typ.)
Full Radius
(Typ.)
116 Typ.
R
R 4 Plcs.
9-51
9-51
100
100
Figure 1
Front Mounting
Figure 2
Rear Mounting
Front Mounting
Rear Mounting
.015
[.381]
.369/.364
[9.37/9.24]
.403/.398
[10.24/10.11]
1.810/1.805
[45.98/45.85]
1.810/1.805
[45.98/45.85]
1.448
.002
[36.83/36.73]
1.514
.002
[38.51/38.40]
Max.
Typ.
R
.055
[1.40] Max.
Typ.
R
+.005
–.000
+.127
–.000
.101
[2.56 ]
Number A B C
of Fig. +.004 [.102] +.004 [.102] +.005 [.127]
Contacts – .000 [.000] – .000 [.000] – .000 [.000]
1.404 .274 .570
910.26 6.96 14.48
2.406 .257 .570
10.31 6.53 14.48
1.554 .274 .720
15 14.07 6.96 18.29
2.556 .257 .720
14.12 6.53 18.29
1.704 .274 .870
21 17.88 6.96 22.10
2.706 .257 .870
17.93 6.53 22.10
1.804 .274 .970
25 20.42 6.96 24.64
2.806 .257 .970
20.47 6.53 24.64
1.954 .274 1.120
31 24.23 6.96 28.45
2.956 .257 1.120
24.28 6.53 28.45
11.104 .274 1.270
37 28.04 6.96 32.26
21.106 .257 1.270
28.09 6.53 32.26
11.054 .314 1.220
51 26.77 7.98 30.99
21.056 .300 1.220
26.82 7.62 30.99
Panel Cutout Dimensions —
MCK
Microminiature D Connectors
MCD Series Plastic Shell Connectors
11
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
Part A CEF
Avg. Weight
Number BMax. +.010 [.254] D Max lbs. ± 5%
± .010 [.254] -.018 [.457] ±.010 [.254] ± 005 [.127] [grams]
MCD**- 9P*** .778 .2918 .398 .173 .208 .565 .0017
19.76 7.412 10.11 4.39 5.28 14.35 0.77
MCD**- 9S*** .778 .3798 .398 .173 .208 .565 .0016
19.76 9.647 10.11 4.39 5.28 14.35 0.72
MCD**- 15P*** .928 .4418 .548 .173 .208 .715 .0024
23.57 11.222 13.92 4.39 5.28 18.16 1.08
MCD**- 15S*** .928 .5298 .548 .173 .208 .715 .0023
23.57 13.457 13.92 4.39 5.28 18.16 1.04
MCD**- 21P*** 1.078 .5918 .698 .173 .208 .865 .0035
27.38 15.032 17.73 4.39 5.28 21.97 1.59
MCD**- 21S*** 1.078 .6798 .698 .173 .208 .865 .0034
27.38 17.267 17.73 4.39 5.28 21.97 1.54
MCD**- 25P*** 1.178 .6918 .798 .173 .208 .965 .0042
29.92 17.572 20.27 4.39 5.28 24.51 1.90
MCD**- 25S*** 1.178 .7798 .798 .173 .208 .965 .0037
29.92 19.807 20.27 4.39 5.28 24.51 1.67
MCD**- 31P*** 1.328 .8418 .948 .173 .208 1.115 .0053
33.73 21.382 24.08 4.39 5.28 28.32 2.40
MCD**- 31S*** 1.328 .9298 .948 .173 .208 1.115 .0048
33.73 23.617 24.08 4.39 5.28 28.32 2.17
MCD**- 37P*** 1.478 .9918 1.098 .173 .208 1.265 .0057
37.54 25.192 27.89 4.39 5.28 32.13 2.58
MCD**- 37S*** 1.478 1.0798 1.098 .173 .208 1.265 .0051
37.54 27.427 27.89 4.39 5.28 32.13 2.31
MCD**- 51P*** 1.428 .9418 1.048 .220 .250 1.215 .0072
36.27 23.922 26.62 5.59 6.35 30.86 3.26
MCD**- 51S*** 1.428 1.0298 1.048 .220 .250 1.215 .0063
36.27 26.157 26.62 5.59 6.35 30.86 2.85
P = Pin, S = Socket
Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails.
*See “How to Specify” for description, on page 7.
Screw Mount
Dimensions Per
MIL-DTL-83513
Plug
(Pin side)
Receptacle
(Socket side)
F
Contact #1
Pin E
A
Two Mtg. Holes
Pin
B
Pin
D
.199±.005
[5.05±.13]
.094±.006
[2.39±0.15]
Ø.092±.004
[2.34±.10]
.395/.360
[10.0 3/9.14]
C
Crimp or Solder
Crimp or Solder
F
Contact #1
E
A
Two Mtg. Holes
Ø.092±.004
[2.34±0.10]
.375/.340
[9.52/8.64]
C
.180±.005
[4.57±0.13]
.094±.006
[2.39±0.15] D
B
Socket
Socket Socket
Liquid Crystal Polymer or
Polyphenylene Sulfide — MCDR3* per
MIL-DTL-83513 Note: MCD Plastic Screw Mount Series is intermateable with MCDM Metal Series Connectors (Pages 25 and 26).
Microminiature D Connectors
MCD Series Plastic Shell Connectors (Continued)
12 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Part A C D E Avg. Weight
Number ±.005 [.127] BMax. ±.010 [.254] ±.010 [.254] ±.005 [.127] lbs. ± 5%
[grams]
MCD**- 9P*** .506 .2918 .398 .165 .208 .0017
12.85 74.12 10.11 4.19 5.28 0.77
MCD**- 9S*** .506 .3798 .398 .165 .208 .0016
12.85 96.47 10.11 4.19 5.28 0.72
MCD**- 15P*** .656 .4418 .548 .165 .208 .0024
16.66 112.22 13.92 4.19 5.28 1.08
MCD**- 15S*** .656 .5298 .548 .165 .208 .0023
16.66 134.57 13.92 4.19 5.28 1.04
MCD**- 21P*** .806 .5918 .698 .165 .208 .0035
20.47 150.32 17.73 4.19 5.28 1.59
MCD**- 21S*** .806 .6798 .698 .165 .208 .0034
20.47 172.67 17.73 4.19 5.28 1.54
MCD**- 25P*** .906 .6918 .798 .165 .208 .0042
23.01 175.72 20.27 4.19 5.28 1.90
MCD**- 25S*** .906 .7798 .798 .165 .208 .0037
23.01 198.07 20.27 4.19 5.28 1.67
MCD**- 31P*** 1.056 .8418 .948 .165 .208 .0053
26.82 213.82 24.08 4.19 5.28 2.40
MCD**- 31S*** 1.056 .9298 .948 .165 .208 .0048
26.82 236.17 24.08 4.19 5.28 2.17
MCD**- 37P*** 1.206 .9918 1.098 .165 .208 .0057
30.63 251.92 27.89 4.19 5.28 2.58
MCD**- 37S*** 1.206 1.0798 1.098 .165 .208 .0051
30.63 274.27 27.89 4.19 5.28 2.31
MCD**- 51P*** 1.156 .9418 1.048 .208 .250 .0072
29.36 239.22 26.62 5.28 6.35 3.26
MCD**- 51S*** 1.156 1.0298 1.048 .208 .250 .0063
29.36 261.57 26.62 5.28 6.35 2.85
P = Pin, S = Socket
Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails.
*See “How to Specify” for description, on page 7.
Clip Mount — MCD
Plug
(Pin side)
Receptacle
(Socket side)
Contact #1
Pin E
A
Pin
B
Pin
D
.199
[5.05]
.395/.360
[10.03/9.14]
C
Crimp or Solder
Crimp or Solder
.093
±.003
[2.44/2.29]
Contact #1
Socket E
A
Socket
B
Socket
D
.180
[4.57]
.375/.340
[9.52/8.64]
C
.093
±.003
[2.44/2.29]
.019
[.483]
.019
[.483]
.060
[1.52]
.060
[1.52]
Note: Clip Mount not covered by
current issue of MIL-DTL-83513.
Microminiature D Connectors
MCD Series Plastic Shell Connectors Panel Mounting — Cutout Dimensions
13
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
Panel Mounting Dimensions — MCD
Clip Mount
Screw Mount
Plug and Receptacle
Rear Mounted
.200±
.005
[5.08±
0.13
]
Plug and Receptacle
Front Mounted
Plug Front Mounted
Receptacle Rear Mounted
.330±
.005
[8.38±
0.13
]
.265±
.005
[6.73±
0.13
]
Plug and Receptacle
Rear Mounted
.200±
.005
[5.08±
0.13
]
Plug and Receptacle
Front Mounted
Plug Front Mounted
Receptacle Rear Mounted
.395±
.005
[10.03±
0.13
]
.300±
.005
[7.62±
0.13
]
Front
Full
Radius
(Typ.) R
R
A
A
C
B
Figure 2
Front
Figure 1
Rear
Figure 4
Rear
Figure 3
B
B
Full
Radius
(Typ.)
116 Typ.
A
C
+ .005
– .000
+ 0.13
– 0.00
.089
[2.26]
+ .005
– .000
+ 0.13
– 0.00
.075
[1.90]
.015
[.381]
Max. Typ.
R.015
[.381]
.089
[2.26]
Max.
Typ.
B
A
R.015
[.381]Max.
Typ.
Number A B C
of Fig. +.004 [.102] +.004 [.102] +.005 [.127]
Contacts – .000 [.000] – .000 [.000] – .000 [.000]
1.438 [11.13] .177 [4.50] —
92.412 [10.46] .177 [4.50] .570 [14.48]
3.438 [11.13] .222 [5.64] —
4.384 [9.75] .222 [5.64] .570 [14.48]
1.588 [14.93] .177 [4.50] —
15 2.562 [14.27] .177 [4.50] .720 [18.29]
3.588 [14.93] .222 [5.64] —
4.534 [13.56] .222 [5.64] .720 [18.29]
1.738 [18.75] .177 [4.50] —
21 2.712 [18.08] .177 [4.50] .870 [22.10]
3.738 [18.75] .222 [5.64] —
4.684 [17.37] .222 [5.64] .870 [22.10]
1.838 [21.29] .177 [4.50] —
25 2.812 [20.62] .177 [4.50] .970 [24.64]
3.838 [21.29] .222 [5.64] —
4.784 [19.91] .222 [5.64] .970 [24.64]
1.988 [25.10] .177 [4.50] —
31 2.962 [24.43] .177 [4.50] 1.120 [28.45]
3.988 [25.10] .222 [5.64] —
4.934 [23.72] .222 [5.64] 1.120 [28.45]
11.138 [28.91] .177 [4.50] —
37 21.112 [28.24] .177 [4.50] 1.270 [32.26]
31.138 [28.91] .222 [5.64] —
41.084 [27.53] .222 [5.64] 1.270 [32.26]
11.088 [27.64] .224 [5.69] —
51 21.062 [26.97] .224 [5.69] 1.220 [30.99]
31.088 [27.64] .264 [6.71] —
41.034 [26.26] .264 [6.71] 1.220 [30.99]
Panel Cutout Dimensions — MCD
Clip Mounting
Screw Mounting
Notes: Front mounting preferred.
Microminiature D Connectors
Mounting and Coupling Hardware
14 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Ø .156
[3.96]Max.
Over Knurl
Jackscrew
.086-56UNC-2A
[2.18]
Retaining
Ring .853
±.015
[21.67
±0.38
]
.600
[15.24]
For Screw Mount MCK,
MCD and MCDM
9-51 Contacts
Slot Head (K)
(KM)
Part Number 5-1532137-8
Jackscrew Assembly
High Profile
(K) 096-0002-0010
M83513/5-06
(KM) S96-0002-0084
Ø.125
[3.18]
Jackscrew
.086-56UNC-2A
[2.18]
Retaining
Ring .340–.360
[8.64–9.14]
.098
[2.29]
(L)
(LM)
Part Number 5-1532137-7
Jackscrew Assembly
Low Profile
(L) 096-0002-0011
M83513/5-05
(LM) S96-0002-0085
Lockwasher
Bushing
.086-56UNC-2A
[2.18]
.086-56UNC-2B
[2.18]
Hex Nut
.475
[12.07]
.187
[4.75]
Hex.
.125
[3.18]
(P)
Part Number 5-1532137-9
Jackpost Assembly
(P) S96-0002-0009
M83513/5-07
P mates with K,KM, L,LM, Q,QM
and R,RM Jackscrew Assemblies.
Ø .156
[3.96] Max.
Over Knurl
Jackscrew
.086-56UNC-2A
[2.18]
Retaining
Ring .853
±.015
[21.67
±0.38
]
.600
[15.24]
9-51 Contacts
1/16" Allen Head (Q)
(QM)
Part Number 5-1532137-6
Jackscrew Assembly
High Profile
(Q) 096-0002-0014
M83513/5-03
(QM) S96-0002-0086
Ø .125
[3.18]
Jackscrew
.086-56UNC-2A
[2.18]
Retaining
Ring .340–.360
[8.64–9.14]
.098
[2.29]
(R)
(RM)
Part Number 5-1532137-5
Jackscrew Assembly
Low Profile
(R) 096-0002-0015
M83513/5-02
(RM) S96-0002-0087
Ø .200
[3.96] Max.
Over Knurl
Max.
Jackscrew
.112-40UNC-2A
[2.84]
Retaining
Ring .920
[23.37]
.585
[14.86]
100 Contacts
Slot Head (H)
(HM)
Part Number 6-1532137-3
Jackscrew Assembly
High Profile
(H) 096-0002-0061
M83513/5-16
(HM) S96-0002-0088
Ø .187
[4.75]
Jackscrew
Max.
.112-40UNC-2A
[2.84]
Retaining
Ring .415
[10.54]
.100
[2.54]
(J)
(JM)
Part Number 6-1532137-2
Jackscrew Assembly
Low Profile
(J) 096-0002-0062
M83513/5-15
(JM) S96-0002-0089
Lockwasher
Bushing
.112-40UNC-2A
[2.84]
.112-40UNC-2B
[2.84]
Hex Nut
.475
[12.07]
Max.
.185
[4.70]
Hex.
.187
[4.75]
(S)
Part Number 6-1532137-4
Jackpost Assembly
(S) S96-0002-0060
M83513/5-17
Smates with H,HM, J,JM, T,TM and
N,NM Jackscrew Assemblies.
Ø .200
[3.96] Max.
Over Knurl
Max.
Jackscrew
.112-40UNC-2A
[2.84]
Retaining
Ring .920
[23.37]
.585
[14.86]
100 Contacts
1/16" Allen Head (T)
(TM)
Part Number 6-1532137-1
Jackscrew Assembly
High Profile
(T) 096-0002-0064
M83513/5-13
(TM) S96-0002-0090
Ø .187
[4.75]
Jackscrew
Max.
.112-40UNC-2A
[2.84]
Retaining
Ring .415
[10.54]
.100
[2.54]
(N)
(NM)
Part Number 6-1532137-0
Jackscrew Assembly
Low Profile
(N) 096-0002-0065
M83513/5-12
(NM) S96-0002-0091
Notes:
1. Jackpost Assemblies will accom-
modate .094 [2.39] max. thick-
ness panel.
2. Letter(s) in parentheses is to assist
in ordering hardware with the con-
nector (See “How To Specify”
page 7).
3. Single letters (e.g. K) designate
hardware kits (2 pcs. per kit) that
meets M83513/05 requirements
except the material is 303 stain-
less steel, passivated.
4. Add M suffix (e.g. KM) to desig-
nate hardware that meets all
M83513/05 requirements.
Material is corrosion resistant
steel, non-magnetic, 125,000 PSI
tensile strength minimum (Applies
to jackscrews only).
5. Non-MIL hardware ordered sepa-
rately should be ordered in pairs;
i.e. 2 pcs. P/N 096-0002-0009 per
connector half.
6. Items in bold italic arequalified to
MIL-DTL-83513.
Microminiature D Connectors
Mounting and Coupling Hardware (Continued)
15
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
.356
[9.04]
.600
[15.24]
For Clip Mount — MCD (Z)
(X)
Part Number 1466018-1
Mounting Key and Clip
P/N 096-0001-0000
(2 Required)
.075
[1.91]
Ø.125
[3.18]
Retaining Clip
.086
[2.18]-56UNC-2A
Lockscrew
Part Number 4-1532137-3
Lockscrew Assembly
096-0002-0008
.075
[1.91]
Ø.125
[3.18]
Lockscrew
Retaining Clip
.086
[2.18]
.343
±.010
[8.71
±0.25
]
-56UNC-2A
Part Number 1495164-1
Lockscrew Assembly
096-0002-0013
Slot Head 1/16" Allen Head
Notes:
1. Jackpost Assemblies will accommodate .094 [2.39] max. thickness panel.
2. Letter(s) in parentheses is to assist in ordering hardware with the connector (See “How ToSpecify” page 7).
3. Hardware ordered separately should be ordered in pairs; i.e. 2 pcs. P/N 096-0002-0013 per connector half.
For Screw Mount MCK,
MCD and MCDM (Continued) (Y)
For Float Mount — MCK,
MCD and MCDM (F)
Float Mount Bushing
(Factory Installed)
Washer
Bushing
Microminiature D Connectors
MCK Transition Blocks
16 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
RT1 — Right-Angle
Termination Configuration
Notes:
1. For terminal identification see page 18.
2. Grid pattern for all configurations is .100 x .100 [2.54 x 2.54].
3. Lead lengths shown are for RT1.
4. Items in bold italic arequalified to MIL-DTL-83513.
.109
±.015
[2.77
±0.39
]
.185
[4.70]
9, 15, 21 & 25 Contacts 31, 37, 51 & 100 Contacts
Contact #1
(Socket Connectors)
Optional Jackpost (2 Plcs.)
For 9 Thru 51: .086-56 UNC-2B
For 100: .112-40 UNC-2B
Mounting Surface
Mounting Surface
Max.
(Size 100 only)
.190
[4.83]Max.
(Sizes 9-51)
.096
±.003
[2.44
±0.08
]Dia.
Typ. .125
±.003
[3.18
±0 .08
]Dia.
Typ.
Mounting
Surface
Contact #1
(Pin Connectors)
A
B
C
D
EF
E
F
H
GG
(Size 100 Only)
.096
±.003
[2.44
±0 .08
]Dia.
Typ.
MIL-DTL-83513/10 through /21
configurations. 90° — Lo Profile
termination configurations.
See pages 31-35 for M83513
cross references.
How To Specify
MCK C2 P 37 P RT1
Right Angle Termination (Solder Dipped)
RT1 — w/ .109 Leads
RT1A — w/ .140 Leads
RT1B — w/ .172 Leads
Contact Type
S=STD Socket
P=STD Pin
Layout
9,15, 21,25, 31, 37, 51 and 100
Hardware
P = Jackpost (9-51)
B= No Hardware
S = (100)
Shell Finish
C2= Cadmium, YellowChromate
N1= Nickel, Electroless
Connector Series
(See page 9)
Microminiature D Connectors
MCK Transition Blocks (Continued)
17
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
RT1 — Right-Angle
Termination Configuration
(Continued)
Part Number ABCDEFGH
Max. ± 005 [.127] Max. Max. Max. +.010 [.254] +.010 [.254] Max.
MCK-**- *- 9PRT1 .787 .565 .3338 .308 .425 .250 .230 —
19.99 14.35 8.48 7.83 10.80 6.35 5.84
MCK-**- *- 9SRT1 .787 .565 .4018 .308 .425 .250 .230 —
19.99 14.35 10.21 7.83 10.80 6.35 5.84
MCK-**- *- 15PRT1 .937 .715 .4838 .308 .425 .250 .130 —
23.80 18.16 12.29 7.83 10.80 6.35 3.30
MCK-**- *- 15SRT1 .937 .715 .5518 .308 .425 .250 .130 —
23.80 18.16 14.02 7.83 10.80 6.35 3.30
MCK-**- *- 21PRT1 1.087 .865 .6338 .308 .425 .250 .130 —
27.61 21.97 16.10 7.83 10.80 6.35 3.30
MCK-**- *- 21SRT1 1.087 .865 .7018 .308 .425 .250 .130 —
27.61 21.97 17.83 7.83 10.80 6.35 3.30
MCK-**- *- 25PRT1 1.187 .965 .7338 .308 .425 .250 .130 —
30.15 24.51 18.64 7.83 10.80 6.35 3.30
MCK-**- *- 25SRT1 1.187 .965 .8018 .308 .425 .250 .130 —
30.15 24.51 20.37 7.83 10.80 6.35 3.30
MCK-**- *- 31PRT1 1.337 1.115 .8838 .308 .525 .250 .130 1.090
33.96 28.32 22.45 7.83 13.34 6.35 3.30 27.69
MCK-**- *- 31SRT11.337 1.115 .9518 .308 .525 .250 .130 1.090
33.96 28.32 24.18 7.83 13.34 6.35 3.30 27.69
MCK-**- *- 37PRT1 1.487 1.265 1.0338 .308 .525 .250 .130 1.190
37.77 32.13 26.26 7.83 13.34 6.35 3.30 30.23
MCK-**- *- 37SRT1 1.487 1.265 1.1018 .308 .525 .250 .130 1.190
37.77 32.13 27.99 7.83 13.34 6.35 3.30 30.23
MCK-**- *- 51PRT1 1.435 1.215 .9838 .351 .660 .300 .150 1.230
36.45 30.86 24.99 8.92 16.76 7.62 3.81 31.24
MCK-**- *- 51SRT1 1.435 1.215 1.0518 .351 .660 .300 .150 1.230
36.45 30.86 26.72 8.92 16.76 7.62 3.81 31.24
MCK-**- *- 100PRT1 2.175 1.800 1.3838 .394 1.010 .400 .200 1.825
55.25 45.72 35.15 10.01 25.65 10.16 5.08 46.36
MCK-**- *- 100SRT1 2.175 1.800 1.508 .394 1.010 .400 .200 1.825
55.25 45.72 38.30 10.01 25.65 10.16 5.08 46.36
P = Pin, S = Socket
Note: Items in bold italic arequalified to MIL-DTL-83513.
Microminiature D Connectors
MCK Transition Blocks (Continued)
18 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
RT1 — Right-Angle
Termination Configuration
(Continued)
View is from mounting surface of
connector. Plug configuration shown.
For receptacle, use mirror image.
(Except 100 contacts)
12 11 10 8 6 4 3 2
25 23 21 20 19 18 16 14
13 24 22 9 7 5 17 15 1
11 9 7 17 4 14 1
21 20 19 18 16 15 13 12
10 8 6 5 3 2
7542
8 6 12 3 1
15 14 13 11 10 9
17 15 13 11 27 8 6 4 2
18 16 14 12 10 9 7 5 3 1
35 33 31 29 46 43 41 25 23 21 19
34 32 30 28 45 42 26 24 22 20
51 50 49 48 47 44 40 39 38 37 36
54 2 1
9 8 3 7 6
36 34 32 30 27 25 2 21
37 35 33 31 29 28 26 24 22 20
19 17 15 13 11 9 7 5 3 1
18 16 14 12 10 8 6 4 2
15 13 11 9 8 6 4 2
16 14 12 10 24 7 5 3 1
30 29 27 25 23 21 9 17
328 26 22 20 18
2 4 6 8 10 12 14 16 18 20 22 24 26
77 79 81 83 85 87 89 91 93 95 97 99
1 3 5 7 9 11 13 15 17 19 21 23 25
27 29 31 33 35 37 39 41 43 45 47 49 51
28 30 32 34 36 38 40 42 44 46 48 50
52 54 56 58 60 62 64 66 68 70 72 74
53 55 57 59 61 63 65 67 69 71 73 75
76 78 80 82 84 86 88 90 92 94 96 98 100
25 23 21 19 17 15 13 11 9 7 5 3 1
26 24 22 20 18 16 14 12 10 8 6 4 2
51 49 47 45 43 41 39 37 35 33 31 29 27
50 48 46 44 42 40 38 36 34 32 30 28
75 73 71 69 67 65 63 61 59 57 55 53
74 72 70 68 66 64 62 60 58 56 54 52
100 98 96 94 92 90 88 86 84 82 80 78 76
99 97 95 93 91 89 87 85 83 81 79 77
C
L
C
L
C
L
.100
[2.54] Typ. .050
[1.27]
.020
[0.51]
.020
[0.51]
.020
[0.51]
.083
[2.11]
Typ.
Typ. .100
[2.54] .158
[4.01]
Typ.
C
LC
L
C
L
C
L
C
L
.100
[2.54] Typ. .050
[1.27]
.108
[2.74]
.020
[0.51]
.020
[0.51]
.183
[4.65]
.100
[2.54] Typ.
.100
[2.54] Typ.
1.800
[45.72] Ref. .275
[6.99] Ref.
.100
[2.54] Typ.
Ref.
.100
[2.54] Typ.
.100
[2.54] Ref.
Socket #1 Ref.
(Receptacle Connector)
.025
[0.64] Ref.
.050
[1.27] Typ.
Ref.
1.800
[45.72] Ref. .275
[6.99] Ref.
.100
[2.54] Typ.
Ref.
.100
[2.54] Ref.
.050
[1.27] Typ.
Ref.
.050
[1.27]
Typ.
.050
[1.27]
Typ.
.050
[1.27]
.100
[2.54]
.050
[1.27]
.108
[2.74]
Typ.
Typ.
.050
[1.27]
.083
[2.11]
Typ.
9Contacts
31 Contacts
37 Contacts
100 Contacts
(Socket Connector)
.100
[2.54] Ref.
Pin #1 Ref.
(Plug Connector)
.025
[0.64] Ref.
100 Contacts
(Pin Connector)
51 Contacts
.100
[2.54] Typ. .050
[1.27] .020
[0.51]
.083
[2.11]
Typ.
21 Contacts
25 Contacts
15 Contacts
C
L
1.266
[32.16] Ref. 1.216
[30.89] Ref.
.966
[24.54] Ref. 1.116
[28.35] Ref.
.866
[22.00] Ref.
.716
[18.19] Ref.
.566
[14.38] Ref.
Microminiature D Connectors
MCK Transition Blocks (Continued)
19
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
How To Specify
ST1 — Straight
Termination Configuration
.185
[4.70]
.190
[4.83] Max. (Sizes 9-51)
(Sizes 9-51)
Max. (Size100 only)
.550
[13.97] Max.
.355
[9.02] Max.
.100
[2.54] Typ.
.050
[1.27] Typ.
.165
[4.20] Max. (Sizes 9-51) .303
[7.70] Max. (Size 100 only)
.096±.003
[2.44±.076] Dia. Typ.
(For Size 9 Thru 51)
.125±.003
[3.18±.076] Dia. Typ.
(For Size 100 Only)
Contact #1
(Socket Connector)
Contact #1
(Pin Connector)
Lead #1
(Pin Connector) Lead #1
(Socket Connector)
Optional Jackpost (2 Plcs.)
For 9 Thru 51: .086-56 UNC-2B
For 100: .112-40 UNC-2B
A
B
F
C
D
E
.109
±.015
[2.77
±0.39
]
(Lead Length For ST1 Shown)
(Size100 only)
MIL-DTL-83513/22 through /27
configurations. 180° — Lo Profile
termination configurations.
See page 35 for M83513 cross
references.
MCK C2 P 37 P ST1
Straight Termination (Solder Dipped)
ST1 — w/ .109 Leads
ST1A — w/ .140 Leads
ST1B — w/ .172 Leads
Contact Type
S=STDSocket
P=STD Pin
Layout
9,15, 21,25, 31, 37, 51 and 100
Hardware
P = Jackpost (9-51)
B= No Hardware
S= (100)
Shell Finish
C2= Cadmium, YellowChromate
N1= Nickel, Electroless
Connector Series
(See page 9)
Notes:
1. For terminal identification see page 5048.
2. Grid pattern for all configurations is .100 x .100 [2.54 x 2.54].
3. Lead lengths shown are for ST1.
4. Items in bold italic arequalified to MIL-DTL-83513.
Microminiature D Connectors
MCK Transition Blocks (Continued)
20 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Part Number ABCDEF
Max. ± .007 [.178] ± .005 [.127] Max. Max. Max.
MCK-**- *- 9PST1 1.390 1.150 .565 .885 .3338 .308
35.31 29.21 14.35 22.48 8.48 7.83
MCK-**- *- 9SST1 1.390 1.150 .565 .885 .4018 .308
35.31 29.21 14.35 22.48 10.21 7.83
MCK-**- *- 15PST1 1.390 1.150 .715 .945 .4838 .308
35.31 29.21 18.16 24.00 12.29 7.83
MCK-**- *- 15SST1 1.390 1.150 .715 .945 .5518 .308
35.31 29.21 18.16 24.00 14.02 7.83
MCK-**- *- 21PST1 1.690 1.450 .865 1.185 .6338 .308
42.93 36.83 21.97 30.10 16.10 7.83
MCK-**- *- 21SST1 1.690 1.450 .865 1.185 .7018 .308
42.93 36.83 21.97 30.10 17.83 7.83
MCK-**- *- 25PST1 1.740 1.500 .965 1.275 .7338 .308
44.20 38.10 24.51 32.39 18.64 7.83
MCK-**- *- 25SST1 1.740 1.500 .965 1.275 .8018 .308
44.20 38.10 24.51 32.39 20.37 7.83
MCK-**- *- 31PST1 2.040 1.800 1.115 1.575 .8838 .308
51.82 45.72 28.32 40.01 22.45 7.83
MCK-**- *- 31SST1 2.040 1.800 1.115 1.575 .9518 .308
51.82 45.72 28.32 40.01 24.18 7.83
MCK-**- *- 37PST1 2.340 2.100 1.265 1.875 1.0338 .308
59.44 53.34 32.13 47.63 26.26 7.83
MCK-**- *- 37SST1 2.340 2.100 1.265 1.875 1.1018 .308
59.44 53.34 32.13 47.63 27.99 7.83
MCK-**- *- 51PST1 2.270 2.000 1.215 1.775 .9838 .351
57.66 50.80 30.86 45.09 24.99 8.92
MCK-**- *- 51SST1 2.280 2.000 1.215 1.775 1.0518 .351
57.91 50.80 30.86 45.09 26.72 8.92
MCK-**- *- 100PST1 3.250 2.800 1.800 2.585 1.3838 .460
82.55 71.12 45.72 65.66 35.15 11.68
MCK-**- *- 100SST1 3.250 2.800 1.800 2.585 1.508 .460
82.55 71.12 45.72 65.66 38.30 11.68
P = Pin, S = Socket
ST1 — Straight Termination
Configuration (Continued)
Note: Items in bold italic are qualified to MIL-DTL-83513.
Microminiature D Connectors
MCK Transition Blocks (Continued)
21
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
ST1 — Straight Termination
Configuration (Continued)
View is from mounting surface of
connector. Plug configuration shown.
For receptacle, use mirror image.
15
6917 31
116
20 37
119
9 15
1 8
12 21
1 11
14 25
1 13
36 51
19 35
1 18
76 100
52 75
27 51
1 26
C
LC
L
C
L
C
L
C
L
.100
[2.54] Typ.
.050
[1.27]
C
L
C
L
C
L
.100
[2.54] Typ.
.050
[1.27]
.050
[1.27]
.050
[1.27]
.375
[9.53]
.225
[5.72]
.050
[1.27]
.225
[5.72]
.050
[1.27]
.150
[3.81]
.050
[1.27]
.150
[3.81]
.050
[1.27]
.150
[3.81]
Typ.
.100
[2.54] Typ.
.050
[1.27] Typ.
.100
[2.54] Typ.
.050
[1.27] Typ.
.100
[2.54] Typ.
.050
[1.27] Typ.
.100
[2.54] Typ.
.050
[1.27] Typ.
Typ.
.100
[2.54] Typ.
.050
[1.27] Typ.
.100
[2.54]Typ.
.050
[1.27]
Typ.
9 Contacts
15 Contacts
21 Contacts
25 Contacts
31 Contacts
37 Contacts
51 Contacts
100 Contacts
.050
[1.27]
.150
[3.81]
.100
[2.54]
.150
[3.81]
Socket #1 Ref.
(Receptacle Connector)
Pin #1 Ref.
(Plug Connector)
Microminiature D Connectors
MCK ST2 Series Straight Mount PCB Connectors
22 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
MCK with Cactus Bend
Termination
nMeets MIL-DTL-83513
Performance requirements
nSingle metal shell with no
Transition Block
nLow profile and light weight
n.100 [2.54] x .075 [1.91]
grid pattern
nDesign allows lower cost
construction
Pin
Pin
Contact #1 2-56 UNC-2B Thd.
Opt. Jackpost
2 Plcs.
2-56 Thd.
Studs. Opt.
A
C
B
.308
[7.83] Max.
.190
[4.83] Max.
.400
[10.16]
.210
±.02
[5.33
±0.5
]
.182
±.004
[4.62
±0.10
]
#25 AWG, Copper, Hard,
Gold Plated, Solder Dipped
Metal Mounting
Surface
Max.
.100
[2.54] Typ. .075
[1.91] Typ.
.075
[1.91] Typ.
.109
[2.76] Min. .160
[4.06] Min.
.050
[1.27] Typ. .025
[0.64] Typ.
.038
[0.97] Typ.
.225
[5.72]Ref.
Socket
Socket
Contact #1 2-56 UNC-2B Thd.
Opt. Jackpost
2 Plcs.
2-56 Thd.
Studs. Opt.
A
C
B
.308
[7.83] Max.
.190
[4.83] Max.
.400
[10.16]
.210
±.02
[5.33
±0.5
]
.195
±.003
[4.95
±0.08
]
#25 AWG, Copper, Hard,
Gold Plated, Solder Dipped
Metal Mounting
Surface
Max.
.100
[2.54] Typ. .075
[1.91] Typ.
.075
[1.91] Typ.
.109
[2.76] Min. .160
[4.06] Min.
.050
[1.27] Typ. .025
[0.64] Typ.
.038
[0.97] Typ.
.225
[5.72]Ref.
Microminiature D Connectors
MCK ST2 Series Straight Mount PCB Connectors (Continued)
23
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
Part Number AB± .005 C
Max. Max.
MCK-**-*- 9 PST2 .785 .565 .333
19.94 14.35 8.46
MCK-**-*- 9 SST2 .785 .565 .402
19.94 14.35 10.21
MCK-**-*- 15 PST2 .935 .715 .483
23.75 18.16 12.27
MCK-**-*- 15 SST2 .935 .715 .552
23.75 18.16 14.02
MCK-**-*- 21 PST2 1.085 .865 .633
27.56 21.97 16.08
MCK-**-*- 21 SST2 1.085 .865 .702
27.56 21.97 17.83
MCK-**-*- 25 PST2 1.185 .965 .733
30.10 24.51 18.62
MCK-**-*- 25 SST2 1.185 .965 .802
30.10 24.51 20.37
MCK-**-*- 31 PST2 1.335 1.115 .883
33.91 28.32 22.43
MCK-**-*- 31 SST2 1.335 1.115 .952
33.91 28.32 24.18
MCK-**-*- 37 PST2 1.485 1.265 1.033
37.72 32.13 26.24
MCK-**-*- 37 SST2 1.485 1.265 1.102
37.72 32.13 27.99
MCK C2 P 37 P ST2
Straight Termination
Contact Type
S = Standard Socket
P = Standard Pin
Layout
9, 15, 21, 25, 31, 37
Hardware
P = Jackpost (2-56 THD)
B = No Hardware
Shell Finish
C2 = Cadmium, Yellow Chromate
N1 = Nickel, Electroless
Connector Series
(See Page 9)
How To Specify
Microminiature D Connectors
MCK ST2 Series Straight Mount PCB Connectors (Continued)
24 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
.183
[4.65]
.183
[4.65]
C
L
C
L
C
L
C
L
C
L
C
L
68
79
24
135
10 12 14
911 13 15
12 14 16 18 20
14 16 18 20 22 24
24681012
135791113
18 20 22 24 26 28 30
17 19 21 23 25 27 29 31
24 6 8 10 12 14 16 18
13 5 7 9 11 13 15 17 19
21 23 25 27 29 31 33 35 37
20 22 24 26 28 30 32 34 36
13579111315
2 4 6 8 10 12 14 16
15 17 19 21 23 25
246810
1357911
13 15 17 19 21
1357
2468
.183
[4.65]
.183
[4.65]
.183
[4.65]
.183
[4.65]
Size 9
Size 15
Size 21
Size 25
Size 31
Size 37
.183
[4.65]
.183
[4.65]
C
L
C
L
C
L
C
L
C
L
C
L
97
86
42
531
14 12 10
15 13 11 9
21 19 17 15 13
25 23 21 19 17 15
12108642
131197531
30 28 26 24 22 20 18
31 29 27 25 23 21 19 17
18 16 14 12 10 8 6 4 2
19 17 15 13 11 9 7 5 3 1
36 34 32 30 28 26 24 22 20
37 35 33 31 29 27 25 23 21
16 14 12 10 8 6 4 2
15 13 11 9 7 5 3 1
24 22 20 18 16 14
108642
1197531
20 18 16 14 12
8642
7531
.183
[4.65]
.183
[4.65]
.183
[4.65]
.183
[4.65]
Size 9
Size 15
Size 21
Size 25
Size 31
Size 37
Socket #1 Ref.
(Receptacle Connector)
Pin #1 Ref.
(Plug Connector)
View is of mounting surface of pin connector View is of mounting surface of socket connector
Microminiature D Connectors
MCDM Series Metal Shell Connectors
25
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
Performance
Contact Resistance —The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms,
using standard #24 solid copper leads
when measured directly behind the
crimp joints of the mated pin and socket
contacts. The average resistance value at
100 microvolts is 4.8 milliohms.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
Solder Pots: 600 VAC at sea level;
150 VAC at 70,000 feet [21,336 m].
Wire Terminations: 750 VAC at sea level;
200 VAC at 70,000 feet [21,336m]
Vibration (Per MIL-STD-202C,
Method 204-A, Condition D) —No
discontinuity in excess of 1 microsecond
during twelve 20 minute sweeps from 10
to 2,000 CPS at .06 double amplitude or
20 G forces, whichever is less.
Corrosion Resistance (Per
MIL-STD-202C, Method 101B,
Condition B) —Both mated and
unmated samples do not exceed the
maximum allowable contact resistance
(8 milliohms) when subjected to the
48 hour salt spray test.
Durability —The contact resistance
after 500 mating cycles is less than the
maximum allowable, 8 milliohms.
Insulation Resistance —
Greater than 5,000 megohms at room
temperature for the materials listed
under “Materials”.
Maximum Current Carrying
Capacity —No. 24 contact, 3
amperes. It must be recognized,
however, that all the wires to a connector
will not carry their maximum current
under all environmental conditions due
to wire temperature.
Contact Engaging and Separation
Forces —6oz. [1.67N] maximum
(eng.); 0.5 oz. [.14N] minimum (sep.).
Temperature Range (Operating) —
Diallyl phthalate -67°F to 257°F
[-55°Cto +125°C].
Materials
Insulator —Diallyl phthalate per
MIL-M-14, Type SDG-F or Liquid
Crystal Polymer (LCP) per ASTM
D5138.
Contacts —Pin Contact: Copper alloy
and beryllium copper alloy make up the
complete construction. Socket Contact:
Copper alloy.
Body Shell —High grade aluminum
alloy.
Finishes
Contacts —Standard finish is
0.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Body Shell —Electroless nickel per
AMS 2404.
Note:
Insulators are molded into their metal
shells — No bonded joint is used.
Technical & Performance
Data
The only metal shell con-
nector that mates with all
existing plastic types. This
line is ideal for external use
and other applications
requiring frequent discon-
nect and remating. When
durability and reliability are
paramount the metal shell
connector is unsurpassed —
it eliminates the need for
retrofitting wherenew metal
shell varieties must mate
with older plastic types.
Originally designed for mili-
tary applications, they are
currently used for commer-
cial requirements, including
computers.
Screw Mount
B
C
A
F
E
D
A
F
Contact #1
Pin
Pin
Contact #1
Socket
Socket
Pin
Socket
.089–.094
[2.26–2.39]
.093
[2.36]
D
Dia.
2 Plcs.
.089–.094
[2.26–2.39] Dia.
.193
[4.90]
.379
[9.63]
.180
[4.57]
.365
[9.27]
.798
[20.27]
B
.093
[2.36]
E
Microminiature D Connectors
MCDM Series Metal Shell Connectors (Continued)
26 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
PartNumber AB C D E F Avg. Weight
± .005 ± .005 ± .010 ± .010 ± .005 ± .005 lbs. ± 5%
[±.127] [±.127] [±.254] [±.254] [±.127] [±.127] [grams]
MCDM1-9P*** .780 .290 .398 .165 .208 .565 .003
19.81 7.36 10.11 4.19 5.28 14.35 1.36
MCDM1-9S*** .780 .365 .398 .165 .208 .565 .003
19.81 9.27 10.11 4.19 5.28 14.35 1.36
MCDM1-15P*** .930 .440 .548 .165 .208 .715 .004
23.62 11.18 13.92 4.19 5.28 18.16 1.81
MCDM1-15S*** .930 .515 .548 .165 .208 .715 .004
23.62 13.08 13.92 4.19 5.28 18.16 1.81
MCDM1-21P*** 1.080 .590 .698 .165 .208 .865 .005
27.43 14.99 17.73 4.19 5.28 21.97 2.26
MCDM1-21S*** 1.080 .665 .698 .165 .208 .865 .005
27.43 16.89 17.73 4.19 5.28 21.97 2.26
MCDM1-25P*** 1.180 .690 .798 .165 .208 .965 .006
29.97 17.53 20.27 4.19 5.28 24.51 2.72
MCDM1-25S*** 1.180 .765 .798 .165 .208 .965 .005
29.97 19.43 20.27 4.19 5.28 24.51 2.26
MCDM1-30P*** .930 .435 .548 .252 .295 .715 .007
23.62 11.05 13.92 6.40 7.49 18.16 3.17
MCDM1-30S*** .930 .515 .548 .252 .295 .715 .007
23.62 13.08 13.92 6.40 7.49 18.16 3.17
MCDM1-31P*** 1.330 .840 .948 .165 .208 1.115 .007
33.78 21.34 16.46 4.19 5.28 28.32 3.17
MCDM1-31S*** 1.330 .915 .948 .165 .208 1.115 .006
33.78 23.24 16.46 4.19 5.28 28.32 2.72
MCDM1-37P*** 1.480 .990 1.098 .165 .208 1.270 .007
37.59 25.15 27.89 4.19 5.28 32.26 3.17
MCDM1-37S*** 1.480 1.065 1.098 .165 .208 1.270 .007
37.59 27.05 27.89 4.19 5.28 32.26 3.17
MCDM1-51P*** 1.430 .940 1.048 .208 .250 1.215 .009
36.32 23.88 26.62 5.28 6.35 30.86 4.08
MCDM1-51S*** 1.430 1.015 1.048 .208 .250 1.215 .008
36.32 25.78 26.62 5.28 6.35 30.86 3.62
Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails.
How To Specify
MCD- M1 B 37 P 6 A 1 18.0
Lead Length in Inches (min.)
X— Special, does not fit description below.
Insulation Color or Finish
1 — All white wire 4 — Gold plated 7 — Color coded per MIL-STD-681,
2 — All yellow wire 5 — Tin dipped gold plated System 1
3 — All gray wire 6 — Bare (unfinished) 8 — Special color code
9 — 10 color repeating (solid) per M83513
Wire Type
*A — Type E, 7 strand *D — Type ET, 19 strand G — 19 strand per MIL-22759/11
*B — Type ET, 7 strand F — 7 strand per MIL 22759/11 #26 AWG, #24 AWG
*C — Type E, 19 strand (#28 AWG only) L — Copper, solid
Q — Stranded per MIL-W-22759/33
*Per MIL-W-16878
Wire Size
4 — #24 5 — #25 6 — #26 8 — #28 0 — #30
Connector Series
Shell Type and Material
M1 — Metal Shell
Screw Mount
Diallyl Phthalate or LCP Insulator
Hardware (See Pages 14 and 15)
B— No Hardware
F — Float Bushing
K — Jackscrew, Slotted Head, High Profile
L — Jackscrew, Slotted Head, Low Profile
Q — Jackscrew, Allen Head, High Profile
R — Jackscrew, Allen Head, Low Profile
X — Lockscrew, Slotted Head
Y — Lockscrew, Allen Head
P — Jackpost
S— Solder pot for #26 max. stranded wire
Contact Type
P — Pin S — Socket
Layout
9, 15, 21, 25, 30, 31, 37, 51
Screw Mount (Continued)
Microminiature D Connectors
MCDM Series Metal Shell RF COMBOMATE Connectors
27
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
Screw Mount Coaxial
Terminations
Available now —RF
Performance in standard
subminiature rectangular
connectors, with VSWR
values of 1.01 to 1.10 in
frequencies ranging in DC
to 2.3 GHz. This is the
COMBOMATE Connector.
This series of connectors
incorporates the same metal
shells and twist pin contacts
used in the widely accepted,
high reliability, MCDM Series.
The RF COMBOMATE
Connector Series will
accommodate RG 196 A/U
or RG 178 B/U coaxial cable
terminated in a unique
manner in standard, alr eady
tooled insert layouts. This
feature results in savings in
cost, time and space.
The RF COMBOMATE
Connector Series will
accommodate a maximum
of 17 RG 196 A/U or
RG 178 B/U cables in an
area of less than .225 sq.
inches [14.51 mm2]. Mixed
layouts with coaxial termina-
tions and standard AWG 24,
26 and 28 arealso immedi-
ately available in 7 different
shell sizes. The overall
envelope and mounting
dimensions of equivalent
size of COMBOMATE
Connectors are exactly the
same as the standard
MCDM Series.
C
B
A
F
E
D
Contact #1
Pin
Pin
Epoxy
Pin
.089–.094
[2.26–2.39]
.093
[2.36]
Dia.
2 Plcs.
.193
[4.90]
.379
[9.63]
.250
[6.35]Max.
Contact #1
Socket
A
F
E
.089–.094
[2.26–2.39] Dia.
B
Epoxy
.093
[2.36]
.180
[4.57]
.365
[9.27]
.250
[6.35] Max. D
Socket
Socket
Performance Data —
Coaxial Terminations
Impedance —49.0 to 51.0 Ohms.
Voltage Standing Wave Ratio
(VSWR) —1.01:1 to 1.10:1 at
frequency ranging in DC to 2.3 GHz.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
750 VAC at sea level;
200 VAC at 70,000 feet [21,336 m].
(Actual Test Data) Crosstalk (Between Adjacent Lines)
1 to 2 2 to 3 3 to 4 4 to 5
30 MHz 60.0 db 59.8 db 60.7 db 60.0 db
100 MHz 49.1 db 48.3 db 51.7 db 50.6 db
175 MHz 42.6 db 41.4 db 47.2 db 47.0 db
500 MHz 38.0 db 38.8 db 39.5 db 40.0 db
1000 MHz 31.6 db 32.0 db 30.0 db 32.5 db
2000 MHz 22.4 db 22.5 db 22.3 db 20.8 db
3000 MHz 21.5 db 23.9 db 21.4 db 24.2 db
Insertion Loss
Sample #1 #2 #3 #4 #5
30 MHz .08 db .08 db .08 db .08 db .08 db
100 MHz .24 db .24 db .25 db .25 db .25 db
175 MHz .35 db .36 db .36 db .34 db .32 db
500 MHz .58 db .50 db .60 db .58 db .48 db
1000 MHz 1.25 db 1.33 db 1.36 db 1.35 db 1.24 db
2000 MHz 1.48 db 1.71 db 1.42 db 1.40 db 1.45 db
3000 MHz 2.66 db 2.45 db 2.74 db 2.86 db 2.84 db
Note: Verification of all test data is on file at Tyco Electronics and is
available upon request.
All test runs using RG 196 A/U.
Microminiature D Connectors
MCDM Series Metal Shell RF COMBOMATE Connectors (Continued)
28 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Part Number ABC D EF
± .005 ± .005 Max. Max. ± .005 ± .005
[± .127] [± .127] [± .127] [± .127]
MCDM3-3P** .780 .290 .408 .200 .208 .565
19.81 7.36 10.36 5.08 5.28 14.35
MCDM3-3S** .780 .365 .408 .200 .208 .565
19.81 9.27 10.36 5.08 5.28 14.35
MCDM3-5P** .930 .440 .558 .200 .208 .715
23.62 11.18 14.17 5.08 5.28 18.16
MCDM3-5S** .930 .515 .558 .200 .208 .715
23.62 13.08 14.17 5.08 5.28 18.16
MCDM3-7P** 1.080 .590 .708 .200 .208 .865
27.43 14.99 17.98 5.08 5.28 21.97
MCDM3-7S** 1.080 .665 .708 .200 .208 .865
27.43 16.89 17.98 5.08 5.28 21.97
MCDM3-8P** 1.180 .690 .808 .200 .208 .965
29.97 17.53 20.52 5.08 5.28 24.51
MCDM3-8S** 1.180 .765 .808 .200 .208 .965
29.97 19.43 20.52 5.08 5.28 24.51
MCDM3-10P** 1.330 .840 .958 .200 .208 1.115
33.78 21.34 24.33 5.08 5.28 28.32
MCDM3-10S** 1.330 .915 .958 .200 .208 1.115
33.78 23.24 24.33 5.08 5.28 28.32
MCDM3-12P** 1.480 .990 1.108 .200 .208 1.270
37.59 25.15 27.89 5.08 5.28 32.26
MCDM3-12S** 1.480 1.065 1.108 .200 .208 1.270
37.59 27.05 27.89 5.08 5.28 32.26
MCDM3-17P** 1.430 .940 1.058 .245 .250 1.215
36.32 23.88 26.87 6.22 6.35 30.86
MCDM3-17S** 1.430 1.015 1.058 .245 .250 1.215
36.32 25.78 26.87 6.22 6.35 30.86
Screw Mount Coaxial
Terminations (Continued)
How To Specify
MCD M3 7 P 3 18.0
Lead Length in Inches (min.)
Wire Size
3 — RG 196 A/U (White insulation)
2 — RG 178 B/U (Brown insulation)
X — Special, does not fit description*
Connector Series
Contact Type
P — Pin S — Socket
Layout
3, 5, 7, 8, 10, 12, 17
Maximum RF combinations using RG 196 A/U and RG 178 B/U cable
Shell Type and Material
M3 — Metal Shell
Screw Mount
Diallyl Phthalate or LCP Insulator
*Ordering Criteria: A wide variety of contact combinations, coaxial and power mixed, are available.
Contact Tyco Electronics for additional arrangement numbers.
Microminiature D Connectors
MCDM Series Metal Shell RF COMBOMATE Connectors (Continued)
29
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
Contact Arrangement as
Viewed from the Engaging
Face of the Pin Side
3
RG196 A/U or
RG 178 B/U
8
RG196 A/U or
RG 178 B/U
12
RG196 A/U or
RG 178 B/U
17
RG196 A/U or
RG 178 B/U
Termination Pattern
10
RG196 A/U or
RG 178 B/U
1
1
1
118
35
5136
19
20 37
Shield
Center Conductor
19
13 1 16
14 25 17 31
51 1 118
69 15912 21
5
RG196 A/U or
RG 178 B/U
7
RG196 A/U or
RG 178 B/U
Note: The above contact arrangements are the maximum densities that can be obtained in each shell size when using
RG 196 A/U or RG 178 B/U cable.
Microminiature D Connectors
MCDM Series Metal Shell Connectors Panel Mounting — Cutout Dimensions
30 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Plug and Receptacle
Rear Mounted
Plug Front Mounted
Receptacle Rear Mounted
Plug and Receptacle
Front Mounted
.200
±.005
[5.08
±0.13
]
.395
±.005
[10.03
±0.13
]
.300
±.005
[7.62
±0.13
]
Panel Mounting
Dimensions — MCDM
Plug and Receptacle
Rear Mounted Plug and Receptacle
Front Mounted
Plug Front Mounted
Receptacle Rear Mounted
Front
Full
Radius
(Typ.) R
R
A
A
C
B
Figure 1
Rear
Figure 2
B
Full
Radius
(Typ.)
116/117
C
+ .005
– .000
+ 0.13
– 0.00
.089
[2.26]
+ .005
– .000
+ 0.13
– 0.00
.075
[1.90]
.015
[.381]
Max. Typ.
.089
[2.26]
Number A B C
of Fig. + .004 [+ .102] + .004 [+ .102] + .005 [+ .127]
Contacts – .000 [– .000] – .000 [– .000] – .000 [– .000]
91.412 [10.46] .177 [4.50] .570 [14.48]
2.384 [9.75] .222 [5.64] .570 [14.48]
15 1.562 [14.27] .177 [4.50] .720 [18.29]
2.534 [13.56] .222 [5.64] .720 [18.29]
21 1.712 [18.08] .177 [4.50] .870 [22.10]
2.684 [17.37] .222 [5.64] .870 [22.10]
25 1.812 [20.62] .177 [4.50] .970 [24.64]
2.784 [19.91] .222 [5.64] .970 [24.64]
31 1.962 [24.43] .177 [4.50] 1.120 [28.45]
2.934 [23.72] .222 [5.64] 1.120 [28.45]
37 11.112 [28.24] .177 [4.50] 1.270 [32.26]
21.084 [27.53] .222 [5.64] 1.270 [32.26]
51 11.062 [26.97] .224 [5.69] 1.220 [30.99]
21.034 [26.26] .264 [6.71] 1.220 [30.99]
Panel Cutout Dimensions
Screw Mounting
Note: Front mounting preferred.
Microminiature D Connectors
MIL-DTL-83513 Cross Reference
31
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
MCK (Metal Shell)
M83513/01-A* MCK-**-B- 9PS
M83513/01-B* MCK-**-B- 15PS
M83513/01-C* MCK-**-B- 21PS
M83513/01-D* MCK-**-B- 25PS
M83513/01-E* MCK-**-B- 31PS
M83513/01-F* MCK-**-B- 37PS
M83513/01-G* MCK-**-B- 51PS
M83513/01-H* MCK-**-B-100PS
M83513/02-A* MCK-**-B- 9SS
M83513/02-B* MCK-**-B- 15SS
M83513/02-C* MCK-**-B- 21SS
M83513/02-D* MCK-**-B- 25SS
M83513/02-E* MCK-**-B- 31SS
M83513/02-F* MCK-**-B- 37SS
M83513/02-G* MCK-**-B- 51SS
M83513/02-H* MCK-**-B-100SS
M83513/03-A01* MCK-**-B- 9P6G1-18.0
M83513/03-B01* MCK-**-B- 15P6G1-18.0
M83513/03-C01* MCK-**-B- 21P6G1-18.0
M83513/03-D01* MCK-**-B- 25P6G1-18.0
M83513/03-E01* MCK-**-B- 31P6G1-18.0
M83513/03-F01* MCK-**-B- 37P6G1-18.0
M83513/03-G01* MCK-**-B- 51P6G1-18.0
M83513/03-H01* MCK-**-B-100P6G1-18.0
M83513/03-A02* MCK-**-B- 9P6G1-36.0
M83513/03-B02* MCK-**-B- 15P6G1-36.0
M83513/03-C02* MCK-**-B- 21P6G1-36.0
M83513/03-D02* MCK-**-B- 25P6G1-36.0
M83513/03-E02* MCK-**-B- 31P6G1-36.0
M83513/03-F02* MCK-**-B- 37P6G1-36.0
M83513/03-G02* MCK-**-B- 51P6G1-36.0
M83513/03-H02* MCK-**-B-100P6G1-36.0
M83513/03-A03* MCK-**-B- 9P6G9-18.0
M83513/03-B03* MCK-**-B- 15P6G9-18.0
M83513/03-C03* MCK-**-B- 21P6G9-18.0
M83513/03-D03* MCK-**-B- 25P6G9-18.0
M83513/03-E03* MCK-**-B- 31P6G9-18.0
M83513/03-F03* MCK-**-B- 37P6G9-18.0
M83513/03-G03* MCK-**-B- 51P6G9-18.0
M83513/03-H03* MCK-**-B-100P6G9-18.0
M83513/03-A04* MCK-**-B- 9P6G9-36.0
M83513/03-B04* MCK-**-B- 15P6G9-36.0
M83513/03-C04* MCK-**-B- 21P6G9-36.0
M83513/03-D04* MCK-**-B- 25P6G9-36.0
M83513/03-E04* MCK-**-B- 31P6G9-36.0
M83513/03-F04* MCK-**-B- 37P6G9-36.0
M83513/03-G04* MCK-**-B- 51P6G9-36.0
M83513/03-H04* MCK-**-B-100P6G9-36.0
M83513/03-A05* MCK-**-B- 9P5L4-0.5
M83513/03-B05* MCK-**-B- 15P5L4-0.5
M83513/03-C05* MCK-**-B- 21P5L4-0.5
M83513/03-D05* MCK-**-B- 25P5L4-0.5
M83513/03-E05* MCK-**-B- 31P5L4-0.5
M83513/03-F05* MCK-**-B- 37P5L4-0.5
M83513/03-G05* MCK-**-B- 51P5L4-0.5
M83513/03-H05* MCK-**-B-100P5L4-0.5
M83513/03-A06* MCK-**-B- 9P5L4-1.0
M83513/03-B06* MCK-**-B- 15P5L4-1.0
M83513/03-C06* MCK-**-B- 21P5L4-1.0
M83513/03-D06* MCK-**-B- 25P5L4-1.0
Military Part No. MICRODOT Part No. M83513/03-E06* MCK-**-B- 31P5L4-1.0
M83513/03-F06* MCK-**-B- 37P5L4-1.0
M83513/03-G06* MCK-**-B- 51P5L4-1.0
M83513/03-H06* MCK-**-B-100P5L4-1.0
M83513/03-A07* MCK-**-B- 9P5L5-0.5
M83513/03-B07* MCK-**-B- 15P5L5-0.5
M83513/03-C07* MCK-**-B- 21P5L5-0.5
M83513/03-D07* MCK-**-B- 25P5L5-0.5
M83513/03-E07* MCK-**-B- 31P5L5-0.5
M83513/03-F07* MCK-**-B- 37P5L5-0.5
M83513/03-G07* MCK-**-B- 51P5L5-0.5
M83513/03-H07* MCK-**-B-100P5L5-0.5
M83513/03-A08* MCK-**-B- 9P5L5-1.0
M83513/03-B08* MCK-**-B- 15P5L5-1.0
M83513/03-C08* MCK-**-B- 21P5L5-1.0
M83513/03-D08* MCK-**-B- 25P5L5-1.0
M83513/03-E08* MCK-**-B- 31P5L5-1.0
M83513/03-F08* MCK-**-B- 37P5L5-1.0
M83513/03-G08* MCK-**-B- 51P5L5-1.0
M83513/03-H08* MCK-**-B-100P5L5-1.0
M83513/03-A09* MCK-**-B- 9P6Q1-18.0
M83513/03-B09* MCK-**-B- 15P6Q1-18.0
M83513/03-C09* MCK-**-B- 21P6Q1-18.0
M83513/03-D09* MCK-**-B- 25P6Q1-18.0
M83513/03-E09* MCK-**-B- 31P6Q1-18.0
M83513/03-F09* MCK-**-B- 37P6Q1-18.0
M83513/03-G09* MCK-**-B- 51P6Q1-18.0
M83513/03-H09* MCK-**-B-100P6Q1-18.0
M83513/03-A10* MCK-**-B- 9P6Q1-36.0
M83513/03-B10* MCK-**-B- 15P6Q1-36.0
M83513/03-C10* MCK-**-B- 21P6Q1-36.0
M83513/03-D10* MCK-**-B- 25P6Q1-36.0
M83513/03-E10* MCK-**-B- 31P6Q1-36.0
M83513/03-F10* MCK-**-B- 37P6Q1-36.0
M83513/03-G10* MCK-**-B- 51P6Q1-36.0
M83513/03-H10* MCK-**-B-100P6Q1-36.0
M83513/03-A11* MCK-**-B- 9P6Q9-18.0
M83513/03-B11* MCK-**-B- 15P6Q9-18.0
M83513/03-C11* MCK-**-B- 21P6Q9-18.0
M83513/03-D11* MCK-**-B- 25P6Q9-18.0
M83513/03-E11* MCK-**-B- 31P6Q9-18.0
M83513/03-F11* MCK-**-B- 37P6Q9-18.0
M83513/03-G11* MCK-**-B- 51P6Q9-18.0
M83513/03-H11* MCK-**-B-100P6Q9-18.0
M83513/03-A12* MCK-**-B- 9P6Q9-36.0
M83513/03-B12* MCK-**-B- 15P6Q9-36.0
M83513/03-C12* MCK-**-B- 21P6Q9-36.0
M83513/03-D12* MCK-**-B- 25P6Q9-36.0
M83513/03-E12* MCK-**-B- 31P6Q9-36.0
M83513/03-F12* MCK-**-B- 37P6Q9-36.0
M83513/03-G12* MCK-**-B- 51P6Q9-36.0
M83513/03-H12* MCK-**-B-100P6Q9-36.0
M83513/03-A13* MCK-**-B- 9P6G1-72.0
M83513/03-B13* MCK-**-B- 1 5P6G1-72.0
M83513/03-C13* MCK-**-B- 21P6G1-72.0
M83513/03-D13* MCK-**-B- 25P6G1-72.0
M83513/03-E13* MCK-**-B- 31P6G1-72.0
M83513/03-F13* MCK-**-B- 37P6G1-72.0
M83513/03-G13* MCK-**-B- 51P6G1-72.0
M83513/03-H13* MCK-**-B-100P6G1-72.0
Military Part No. MICRODOT Part No. M83513/03-A14* MCK-**-B- 9P6G9-72.0
M83513/03-B14* MCK-**-B- 15P6G9-72.0
M83513/03-C14* MCK-**-B- 21P6G9-72.0
M83513/03-D14* MCK-**-B- 25P6G9-72.0
M83513/03-E14* MCK-**-B- 31P6G9-72.0
M83513/03-F14* MCK-**-B- 37P6G9-72.0
M83513/03-G14* MCK-**-B- 51P6G9-72.0
M83513/03-H14* MCK-**-B-100P6G9-72.0
M83513/03-A15* MCK-**-B- 9P6Q1-72.0
M83513/03-B15* MCK-**-B- 15P6Q1-72.0
M83513/03-C15* MCK-**-B- 21P6Q1-72.0
M83513/03-D15* MCK-**-B- 25P6Q1-72.0
M83513/03-E15* MCK-**-B- 31P6Q1-72.0
M83513/03-F15* MCK-**-B- 37P6Q1-72.0
M83513/03-G15* MCK-**-B- 51P6Q1-72.0
M83513/03-H15* MCK-**-B-100P6Q1-72.0
M83513/03-A16* MCK-**-B- 9P6Q9-72.0
M83513/03-B16* MCK-**-B- 15P6Q9-72.0
M83513/03-C16* MCK-**-B- 21P6Q9-72.0
M83513/03-D16* MCK-**-B- 25P6Q9-72.0
M83513/03-E16* MCK-**-B- 31P6Q9-72.0
M83513/03-F16* MCK-**-B- 37P6Q9-72.0
M83513/03-G16* MCK-**-B- 51P6Q9-72.0
M83513/03-H16* MCK-**-B-100P6Q9-72.0
M83513/04-A01* MCK-**-B- 9S6G1-18.0
M83513/04-B01* MCK-**-B- 15S6G1-18.0
M83513/04-C01* MCK-**-B- 21S6G1-18.0
M83513/04-D01* MCK-**-B- 25S6G1-18.0
M83513/04-E01* MCK-**-B- 31S6G1-18.0
M83513/04-F01* MCK-**-B- 37S6G1-18.0
M83513/04-G01* MCK-**-B- 51S6G1-18.0
M83513/04-H01* MCK-**-B-100S6G1-18.0
M83513/04-A02* MCK-**-B- 9S6G1-36.0
M83513/04-B02* MCK-**-B- 15S6G1-36.0
M83513/04-C02* MCK-**-B- 21S6G1-36.0
M83513/04-D02* MCK-**-B- 25S6G1-36.0
M83513/04-E02* MCK-**-B- 31S6G1-36.0
M83513/04-F02* MCK-**-B- 37S6G1-36.0
M83513/04-G02* MCK-**-B- 51S6G1-36.0
M83513/04-H02* MCK-**-B-100S6G1-36.0
M83513/04-A03* MCK-**-B- 9S6G9-18.0
M83513/04-B03* MCK-**-B- 15S6G9-18.0
M83513/04-C03* MCK-**-B- 21S6G9-18.0
M83513/04-D03* MCK-**-B- 25S6G9-18.0
M83513/04-E03* MCK-**-B- 31S6G9-18.0
M83513/04-F03* MCK-**-B- 37S6G9-18.0
M83513/04-G03* MCK-**-B- 51S6G9-18.0
M83513/04-H03* MCK-**-B-100S6G9-18.0
M83513/04-A04* MCK-**-B- 9S6G9-36.0
M83513/04-B04* MCK-**-B- 15S6G9-36.0
M83513/04-C04* MCK-**-B- 21S6G9-36.0
M83513/04-D04* MCK-**-B- 25S6G9-36.0
M83513/04-E04* MCK-**-B- 31S6G9-36.0
M83513/04-F04* MCK-**-B- 37S6G9-36.0
M83513/04-G04* MCK-**-B- 51S6G9-36.0
M83513/04-H04* MCK-**-B-100S6G9-36.0
M83513/04-A05* MCK-**-B- 9S5L4-0.5
M83513/04-B05* MCK-**-B- 15S5L4-0.5
M83513/04-C05* MCK-**-B- 21S5L4-0.5
M83513/04-D05* MCK-**-B- 25S5L4-0.5
Military Part No. MICRODOT Part No.
Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
32 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
MCK (Metal Shell)MCK (Metal Shell) (Continued)
M83513/04-E05* MCK-**-B- 31S5L4-0.5
M83513/04-F05* MCK-**-B- 37S5L4-0.5
M83513/04-G05* MCK-**-B- 51S5L4-0.5
M83513/04-H05* MCK-**-B-100S5L4-0.5
M83513/04-A06* MCK-**-B- 9S5L4-1.0
M83513/04-B06* MCK-**-B- 15S5L4-1.0
M83513/04-C06* MCK-**-B- 21S5L4-1.0
M83513/04-D06* MCK-**-B- 25S5L4-1.0
M83513/04-E06* MCK-**-B- 31S5L4-1.0
M83513/04-F06* MCK-**-B- 37S5L4-1.0
M83513/04-G06* MCK-**-B- 51S5L4-1.0
M83513/04-H06* MCK-**-B-100S5L4-1.0
M83513/04-A07* MCK-**-B- 9S5L5-0.5
M83513/04-B07* MCK-**-B- 15S5L5-0.5
M83513/04-C07* MCK-**-B- 21S5L5-0.5
M83513/04-D07* MCK-**-B- 25S5L5-0.5
M83513/04-E07* MCK-**-B- 31S5L5-0.5
M83513/04-F07* MCK-**-B- 37S5L5-0.5
M83513/04-G07* MCK-**-B- 51S5L5-0.5
M83513/04-H07* MCK-**-B-100S5L5-0.5
M83513/04-A08* MCK-**-B- 9S5L5-1.0
M83513/04-B08* MCK-**-B- 15S5L5-1.0
M83513/04-C08* MCK-**-B- 21S5L5-1.0
M83513/04-D08* MCK-**-B- 25S5L5-1.0
M83513/04-E08* MCK-**-B- 31S5L5-1.0
M83513/04-F08* MCK-**-B- 37S5L5-1.0
M83513/04-G08* MCK-**-B- 51S5L5-1.0
M83513/04-H08* MCK-**-B-100S5L5-1.0
M83513/04-A09* MCK-**-B- 9S6Q1-18.0
M83513/04-B09* MCK-**-B- 15S6Q1-18.0
M83513/04-C09* MCK-**-B- 21S6Q1-18.0
Military Part No. MICRODOT Part No. M83513/04-D09* MCK-**-B- 25S6Q1-18.0
M83513/04-E09* MCK-**-B- 31S6Q1-18.0
M83513/04-F09* MCK-**-B- 37S6Q1-18.0
M83513/04-G09* MCK-**-B- 51S6Q1-18.0
M83513/04-H09* MCK-**-B-100S6Q1-18.0
M83513/04-A10* MCK-**-B- 9S6Q1-36.0
M83513/04-B10* MCK-**-B- 15S6Q1-36.0
M83513/04-C10* MCK-**-B- 21S6Q1-36.0
M83513/04-D10* MCK-**-B- 25S6Q1-36.0
M83513/04-E10* MCK-**-B- 31S6Q1-36.0
M83513/04-F10* MCK-**-B- 37S6Q1-36.0
M83513/04-G10* MCK-**-B- 51S6Q1-36.0
M83513/04-H10* MCK-**-B-100S6Q1-36.0
M83513/04-A11* MCK-**-B- 9S6Q9-18.0
M83513/04-B11* MCK-**-B- 15S6Q9-18.0
M83513/04-C11* MCK-**-B- 21S6Q9-18.0
M83513/04-D11* MCK-**-B- 25S6Q9-18.0
M83513/04-E11* MCK-**-B- 31S6Q9-18.0
M83513/04-F11* MCK-**-B- 37S6Q9-18.0
M83513/04-G11* MCK-**-B- 51S6Q9-18.0
M83513/04-H11* MCK-**-B-100S6Q9-18.0
M83513/04-A12* MCK-**-B- 9S6Q9-36.0
M83513/04-B12* MCK-**-B- 15S6Q9-36.0
M83513/04-C12* MCK-**-B- 21S6Q9-36.0
M83513/04-D12* MCK-**-B- 25S6Q9-36.0
M83513/04-E12* MCK-**-B- 31S6Q9-36.0
M83513/04-F12* MCK-**-B- 37S6Q9-36.0
M83513/04-G12* MCK-**-B- 51S6Q9-36.0
M83513/04-H12* MCK-**-B-100S6Q9-36.0
M83513/04-A13* MCK-**-B- 9S6G1-72.0
M83513/04-B13* MCK-**-B- 15S6G1-72.0
Military Part No. MICRODOT Part No. M83513/04-C13* MCK-**-B- 21S6G1-72.0
M83513/04-D13* MCK-**-B- 25S6G1-72.0
M83513/04-E13* MCK-**-B- 31S6G1-72.0
M83513/04-F13* MCK-**-B- 37S6G1-72.0
M83513/04-G13* MCK-**-B- 51S6G1-72.0
M83513/04-H13* MCK-**-B-100S6G1-72.0
M83513/04-A14* MCK-**-B- 9S6G9-72.0
M83513/04-B14* MCK-**-B- 15S6G9-72.0
M83513/04-C14* MCK-**-B- 21S6G9-72.0
M83513/04-D14* MCK-**-B- 25S6G9-72.0
M83513/04-E14* MCK-**-B- 31S6G9-72.0
M83513/04-F14* MCK-**-B- 37S6G9-72.0
M83513/04-G14* MCK-**-B- 51S6G9-72.0
M83513/04-H14* MCK-**-B-100S6G9-72.0
M83513/04-A15* MCK-**-B- 9S6Q1-72.0
M83513/04-B15* MCK-**-B- 15S6Q1-72.0
M83513/04-C15* MCK-**-B- 21S6Q1-72.0
M83513/04-D15* MCK-**-B- 25S6Q1-72.0
M83513/04-E15* MCK-**-B- 31S6Q1-72.0
M83513/04-F15* MCK-**-B- 37S6Q1-72.0
M83513/04-G15* MCK-**-B- 51S6Q1-72.0
M83513/04-H15* MCK-**-B-100S6Q1-72.0
M83513/04-A16* MCK-**-B- 9S6Q9-72.0
M83513/04-B16* MCK-**-B- 15S6Q9-72.0
M83513/04-C16* MCK-**-B- 21S6Q9-72.0
M83513/04-D16* MCK-**-B- 25S6Q9-72.0
M83513/04-E16* MCK-**-B- 31S6Q9-72.0
M83513/04-F16* MCK-**-B- 37S6Q9-72.0
M83513/04-G16* MCK-**-B- 51S6Q9-72.0
M83513/04-H16* MCK-**-B-100S6Q9-72.0
Military Part No. MICRODOT Part No.
M83513/05-02 “A. HD, J/S, L.F,#2”
M83513/05-12 “A. HD, J/S, L.F,#4”
M83513/05-03 “A. HD, J/S,H.F, #2”
M83513/05-13 “A. HD, J/S, H.F. #4”
Military Part No. MICRODOT Part No.
Hardware
M83513/05-05 “S. HD, J/S, L.F,#2”
M83513/05-15 “S. HD, J/S, L.F,#4”
M83513/05-06 “S. HD, J/S, H.F, #2”
M83513/05-16 “S. HD, J/S, H.F, #4”
Military Part No. MICRODOT Part No. M83513/05-07 “JACKPOSTASSY #2”
M83513/05-17 “JACKPOSTASSY,#4”
Military Part No. MICRODOT Part No.
MCDR (Plastic Shell)
M83513/06-A MCDR3-B- 9PS
M83513/06-B MCDR3-B-15PS
M83513/06-C MCDR3-B-21PS
M83513/06-D MCDR3-B-25PS
M83513/06-E MCDR3-B-31PS
M83513/06-F MCDR3-B-37PS
M83513/06-G MCDR3-B-51PS
M83513/07-A MCDR3-B- 9SS
M83513/07-B MCDR3-B-15SS
M83513/07-C MCDR3-B-21SS
M83513/07-D MCDR3-B-25SS
M83513/07-E MCDR3-B-31SS
M83513/07-F MCDR3-B-37SS
Military Part No. MICRODOT Part No. M83513/07-G MCDR3-B-51SS
M83513/08-A01 MCDR3-B- 9P6G1-18.0
M83513/08-B01 MCDR3-B-15P6G1-18.0
M83513/08-C01 MCDR3-B-21P6G1-18.0
M83513/08-D01 MCDR3-B-25P6G1-18.0
M83513/08-E01 MCDR3-B-31P6G1-18.0
M83513/08-F01 MCDR3-B-37P6G1-18.0
M83513/08-G01 MCDR3-B-51P6G1-18.0
M83513/08-A02 MCDR3-B- 9P6G1-36.0
M83513/08-B02 MCDR3-B-15P6G1-36.0
M83513/08-C02 MCDR3-B-21P6G1-36.0
M83513/08-D02 MCDR3-B-25P6G1-36.0
M83513/08-E02 MCDR3-B-31P6G1-36.0
Military Part No. MICRODOT Part No. M83513/08-F02 MCDR3-B-37P6G1-36.0
M83513/08-G02 MCDR3-B-51P6G1-36.0
M83513/08-A03 MCDR3-B- 9P6G9-18.0
M83513/08-B03 MCDR3-B-15P6G9-18.0
M83513/08-C03 MCDR3-B-21P6G9-18.0
M83513/08-D03 MCDR3-B-25P6G9-18.0
M83513/08-E03 MCDR3-B-31P6G9-18.0
M83513/08-F03 MCDR3-B-37P6G9-18.0
M83513/08-G03 MCDR3-B-51P6G9-18.0
M83513/08-A04 MCDR3-B- 9P6G9-36.0
M83513/08-B04 MCDR3-B-15P6G9-36.0
M83513/08-C04 MCDR3-B-21P6G9-36.0
M83513/08-D04 MCDR3-B-25P6G9-36.0
Military Part No. MICRODOT Part No.
*C = Cadmium or N = Nickel (space applications only)
**C2 = Cadmium or N1 = Nickel (space applications only)
Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
33
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
MCDR (Plastic Shell) (Continued)
M83513/08-E04 MCDR3-B-31P6G9-36.0
M83513/08-F04 MCDR3-B-37P6G9-36.0
M83513/08-G04 MCDR3-B-51P6G9-36.0
M83513/08-A05 MCDR3-B- 9P5L4-0.5
M83513/08-B05 MCDR3-B-15P5L4-0.5
M83513/08-C05 MCDR3-B-21P5L4-0.5
M83513/08-D05 MCDR3-B-25P5L4-0.5
M83513/08-E05 MCDR3-B-31P5L4-0.5
M83513/08-F05 MCDR3-B-37P5L4-0.5
M83513/08-G05 MCDR3-B-51P5L4-0.5
M83513/08-A06 MCDR3-B- 9P5L4-1.0
M83513/08-B06 MCDR3-B-15P5L4-1.0
M83513/08-C06 MCDR3-B-21P5L4-1.0
M83513/08-D06 MCDR3-B-25P5L4-1.0
M83513/08-E06 MCDR3-B-31P5L4-1.0
M83513/08-F06 MCDR3-B-37P5L4-1.0
M83513/08-G06 MCDR3-B-51P5L4-1.0
M83513/08-A07 MCDR3-B- 9P5L5-0.5
M83513/08-B07 MCDR3-B-15P5L5-0.5
M83513/08-C07 MCDR3-B-21P5L5-0.5
M83513/08-D07 MCDR3-B-25P5L5-0.5
M83513/08-E07 MCDR3-B-31P5L5-0.5
M83513/08-F07 MCDR3-B-37P5L5-0.5
M83513/08-G07 MCDR3-B-51P5L5-0.5
M83513/08-A08 MCDR3-B- 9P5L5-1.0
M83513/08-B08 MCDR3-B-15P5L5-1.0
M83513/08-C08 MCDR3-B-21P5L5-1.0
M83513/08-D08 MCDR3-B-25P5L5-1.0
M83513/08-E08 MCDR3-B-31P5L5-1.0
M83513/08-F08 MCDR3-B-37P5L5-1.0
M83513/08-G08 MCDR3-B-51P5L5-1.0
M83513/08-A09 MCDR3-B- 9P6Q1-18.0
M83513/08-B09 MCDR3-B-15P6Q1-18.0
M83513/08-C09 MCDR3-B-21P6Q1-18.0
M83513/08-D09 MCDR3-B-25P6Q1-18.0
M83513/08-E09 MCDR3-B-31P6Q1-18.0
M83513/08-F09 MCDR3-B-37P6Q1-18.0
M83513/08-G09 MCDR3-B-51P6Q1-18.0
M83513/08-A10 MCDR3-B- 9P6Q1-36.0
M83513/08-B10 MCDR3-B-15P6Q1-36.0
M83513/08-C10 MCDR3-B-21P6Q1-36.0
M83513/08-D10 MCDR3-B-25P6Q1-36.0
M83513/08-E10 MCDR3-B-31P6Q1-36.0
M83513/08-F10 MCDR3-B-37P6Q1-36.0
M83513/08-G10 MCDR3-B-51P6Q1-36.0
M83513/08-A11 MCDR3-B- 9P6Q9-18.0
M83513/08-B11 MCDR3-B-15P6Q9-18.0
M83513/08-C11 MCDR3-B-21P6Q9-18.0
M83513/08-D11 MCDR3-B-25P6Q9-18.0
M83513/08-E11MCDR3-B-31P6Q9-18.0
M83513/08-F11 MCDR3-B-37P6Q9-18.0
M83513/08-G11 MCDR3-B-51P6Q9-18.0
M83513/08-A12 MCDR3-B- 9P6Q9-36.0
M83513/08-B12 MCDR3-B-15P6Q9-36.0
M83513/08-C12 MCDR3-B-21P6Q9-36.0
M83513/08-D12 MCDR3-B-25P6Q9-36.0
M83513/08-E12 MCDR3-B-31P6Q9-36.0
M83513/08-F12 MCDR3-B-37P6Q9-36.0
M83513/08-G12 MCDR3-B-51P6Q9-36.0
M83513/08-A13 MCDR3-B- 9P6G1-72.0
Military Part No. MICRODOT Part No. M83513/08-B13 MCDR3-B-15P6G1-72.0
M83513/08-C13 MCDR3-B-21P6G1-72.0
M83513/08-D13 MCDR3-B-25P6G1-72.0
M83513/08-E13 MCDR3-B-31P6G1-72.0
M83513/08-F13 MCDR3-B-37P6G1-72.0
M83513/08-G13 MCDR3-B-51P6G1-72.0
M83513/08-A14 MCDR3-B- 9P6G9-72.0
M83513/08-B14 MCDR3-B-15P6G9-72.0
M83513/08-C14 MCDR3-B-21P6G9-72.0
M83513/08-D14 MCDR3-B-25P6G9-72.0
M83513/08-E14 MCDR3-B-31P6G9-72.0
M83513/08-F14 MCDR3-B-37P6G9-72.0
M83513/08-G14 MCDR3-B-51P6G9-72.0
M83513/08-A15 MCDR3-B- 9P6Q1-72.0
M83513/08-B15 MCDR3-B-15P6Q1-72.0
M83513/08-C15 MCDR3-B-21P6Q1-72.0
M83513/08-D15 MCDR3-B-25P6Q1-72.0
M83513/08-E15 MCDR3-B-31P6Q1-72.0
M83513/08-F15 MCDR3-B-37P6Q1-72.0
M83513/08-G15 MCDR3-B-51P6Q1-72.0
M83513/08-A16 MCDR3-B- 9P6Q9-72.0
M83513/08-B16 MCDR3-B-15P6Q9-72.0
M83513/08-C16 MCDR3-B-21P6Q9-72.0
M83513/08-D16 MCDR3-B-25P6Q9-72.0
M83513/08-E16 MCDR3-B-31P6Q9-72.0
M83513/08-F16 MCDR3-B-37P6Q9-72.0
M83513/08-G16 MCDR3-B-51P6Q9-72.0
M83513/09-A01 MCDR3-B- 9S6G1-18.0
M83513/09-B01 MCDR3-B-15S6G1-18.0
M83513/09-C01 MCDR3-B-21S6G1-18.0
M83513/09-D01 MCDR3-B-25S6G1-18.0
M83513/09-E01 MCDR3-B-31S6G1-18.0
M83513/09-F01 MCDR3-B-37S6G1-18.0
M83513/09-G01 MCDR3-B-51S6G1-18.0
M83513/09-A02 MCDR3-B- 9S6G1-36.0
M83513/09-B02 MCDR3-B-15S6G1-36.0
M83513/09-C02 MCDR3-B-21S6G1-36.0
M83513/09-D02 MCDR3-B-25S6G1-36.0
M83513/09-E02 MCDR3-B-31S6G1-36.0
M83513/09-F02 MCDR3-B-37S6G1-36.0
M83513/09-G02 MCDR3-B-51S6G1-36.0
M83513/09-A03 MCDR3-B- 9S6G9-18.0
M83513/09-B03 MCDR3-B- 15S6G9-18.0
M83513/09-C03 MCDR3-B- 21S6G9-18.0
M83513/09-D03 MCDR3-B-25S6G9-18.0
M83513/09-E03 MCDR3-B-31S6G9-18.0
M83513/09-F03 MCDR3-B-37S6G9-18.0
M83513/09-G03 MCDR3-B-51S6G9-18.0
M83513/09-A04 MCDR3-B- 9S6G9-36.0
M83513/09-B04 MCDR3-B-15S6G9-36.0
M83513/09-C04 MCDR3-B-21S6G9-36.0
M83513/09-D04 MCDR3-B-25S6G9-36.0
M83513/09-E04 MCDR3-B-31S6G9-36.0
M83513/09-F04 MCDR3-B-37S6G9-36.0
M83513/09-G04 MCDR3-B-51S6G9-36.0
M83513/09-A05 MCDR3-B- 9S5L4-0.5
M83513/09-B05 MCDR3-B-15S5L4-0.5
M83513/09-C05 MCDR3-B-21S5L4-0.5
M83513/09-D05 MCDR3-B-25S5L4-0.5
M83513/09-E05 MCDR3-B-31S5L4-0.5
Military Part No. MICRODOT Part No. M83513/09-F05 MCDR3-B-37S5L4-0.5
M83513/09-G05 MCDR3-B-51S5L4-0.5
M83513/09-A06 MCDR3-B- 9S5L4-1.0
M83513/09-B06 MCDR3-B-15S5L4-1.0
M83513/09-C06 MCDR3-B-21S5L4-1.0
M83513/09-D06 MCDR3-B-25S5L4-1.0
M83513/09-E06 MCDR3-B-31S5L4-1.0
M83513/09-F06 MCDR3-B-37S5L4-1.0
M83513/09-G06 MCDR3-B-51S5L4-1.0
M83513/09-A07 MCDR3-B- 9S5L5-0.5
M83513/09-B07 MCDR3-B-15S5L5-0.5
M83513/09-C07 MCDR3-B-21S5L5-0.5
M83513/09-D07 MCDR3-B-25S5L5-0.5
M83513/09-E07 MCDR3-B-31S5L5-0.5
M83513/09-F07 MCDR3-B-37S5L5-0.5
M83513/09-G07 MCDR3-B-51S5L5-0.5
M83513/09-A08 MCDR3-B- 9S5L5-1.0
M83513/09-B08 MCDR3-B-15S5L5-1.0
M83513/09-C08 MCDR3-B-21S5L5-1.0
M83513/09-D08 MCDR3-B-25S5L5-1.0
M83513/09-E08 MCDR3-B-31S5L5-1.0
M83513/09-F08 MCDR3-B-37S5L5-1.0
M83513/09-G08 MCDR3-B-51S5L5-1.0
M83513/09-A09 MCDR3-B- 9S6Q1-18.0
M83513/09-B09 MCDR3-B-15S6Q1-18.0
M83513/09-C09 MCDR3-B-21S6Q1-18.0
M83513/09-D09 MCDR3-B-25S6Q1-18.0
M83513/09-E09 MCDR3-B-31S6Q1-18.0
M83513/09-F09 MCDR3-B-37S6Q1-18.0
M83513/09-G09 MCDR3-B-51S6Q1-18.0
M83513/09-A10 MCDR3-B- 9S6Q1-36.0
M83513/09-B10 MCDR3-B-15S6Q1-36.0
M83513/09-C10 MCDR3-B-21S6Q1-36.0
M83513/09-D10 MCDR3-B-25S6Q1-36.0
M83513/09-E10 MCDR3-B-31S6Q1-36.0
M83513/09-F10 MCDR3-B-37S6Q1-36.0
M83513/09-G10 MCDR3-B-51S6Q1-36.0
M83513/09-A11 MCDR3-B- 9S6Q9-18.0
M83513/09-B11 MCDR3-B-15S6Q9-18.0
M83513/09-C11 MCDR3-B-21S6Q9-18.0
M83513/09-D11MCDR3-B-25S6Q9-18.0
M83513/09-E11MCDR3-B-31S6Q9-18.0
M83513/09-F11 MCDR3-B-37S6Q9-18.0
M83513/09-G11MCDR3-B-51S6Q9-18.0
M83513/09-A12 MCDR3-B- 9S6Q9-36.0
M83513/09-B12 MCDR3-B-15S6Q9-36.0
M83513/09-C12 MCDR3-B-21S6Q9-36.0
M83513/09-D12 MCDR3-B-25S6Q9-36.0
M83513/09-E12 MCDR3-B-31S6Q9-36.0
M83513/09-F12 MCDR3-B-37S6Q9-36.0
M83513/09-G12 MCDR3-B-51S6Q9-36.0
M83513/09-A13 MCDR3-B- 9S6G1-72.0
M83513/09-B13 MCDR3-B-15S6G1-72.0
M83513/09-C13 MCDR3-B-21S6G1-72.0
M83513/09-D13 MCDR3-B-25S6G1-72.0
M83513/09-E13 MCDR3-B-31S6G1-72.0
M83513/09-F13 MCDR3-B-37S6G1-72.0
M83513/09-G13 MCDR3-B-51S6G1-72.0
M83513/09-A14 MCDR3-B- 9S6G9-72.0
M83513/09-B14 MCDR3-B-15S6G9-72.0
Military Part No. MICRODOT Part No.
Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
34 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
MCDR (Plastic Shell) (Continued)
M83513/15-H03*N MCK-**-B-100SRT1B
M83513/15-H03*P MCK-**-P-100SRT1B
M83513/16-A01*N MCK-**-B- 9PRT3
M83513/16-B01*N MCK-**-B- 15PRT3
M83513/16-C01*N MCK-**-B- 21PRT3
M83513/16-D01*N MCK-**-B- 25PRT3
M83513/16-E01*N MCK-**-B- 31PRT3
M83513/16-F01*N MCK-**-B- 37PRT3
M83513/16-A01*P MCK-**-P- 9PRT3
M83513/16-B01*P MCK-**-P- 15PRT3
M83513/16-C01*P MCK-**-P- 21PRT3
M83513/16-D01*P MCK-**-P- 25PRT3
M83513/16-E01*P MCK-**-P- 31PRT3
M83513/16-F01*P MCK-**-P- 37PRT3
M83513/16-A02*N MCK-**-B- 9PRT3A
M83513/16-B02*N MCK-**-B- 15PRT3A
M83513/16-C02*N MCK-**-B- 21PRT3A
M83513/16-D02*N MCK-**-B- 25PRT3A
M83513/16-E02*N MCK-**-B- 31PRT3A
M83513/16-F02*N MCK-**-B- 37PRT3A
M83513/16-A02*P MCK-**-P- 9PRT3A
M83513/16-B02*P MCK-**-P- 15PRT3A
M83513/16-C02*P MCK-**-P- 21PRT3A
M83513/16-D02*P MCK-**-P- 25PRT3A
M83513/16-E02*P MCK-**-P- 31PRT3A
M83513/16-F02*P MCK-**-P- 37PRT3A
M83513/16-A03*N MCK-**-B- 9PRT3B
M83513/16-B03*N MCK-**-B- 15PRT3B
M83513/16-C03*N MCK-**-B- 21PRT3B
M83513/16-D03*N MCK-**-B- 25PRT3B
M83513/16-E03*N MCK-**-B- 31PRT3B
M83513/16-F03*N MCK-**-B- 37PRT3B
M83513/16-A03*P MCK-**-P- 9PRT3B
M83513/16-B03*P MCK-**-P- 15PRT3B
M83513/16-C03*P MCK-**-P- 21PRT3B
M83513/16-D03*P MCK-**-P- 25PRT3B
M83513/16-E03*P MCK-**-P- 31PRT3B
M83513/16-F03*P MCK-**-P- 37PRT3B
M83513/17-G01*N MCK-**-B- 51PRT3
M83513/17-G01*P MCK-**-P- 51PRT3
M83513/17-G02*N MCK-**-B- 51PRT3A
M83513/17-G02*P MCK-**-P- 51PRT3A
M83513/17-G03*N MCK-**-B- 51PRT3B
M83513/17-G03*P MCK-**-P- 51PRT3B
M83513/18-H01*N MCK-**-B-100PRT3
M83513/18-H01*P MCK-**-P-100PRT3
M83513/18-H02*N MCK-**-B-100PRT3A
Military Part No. MICRODOT Part No.
M83513/09-C14 MCDR3-B-21S6G9-72.0
M83513/09-D14 MCDR3-B-25S6G9-72.0
M83513/09-E14 MCDR3-B-31S6G9-72.0
M83513/09-F14 MCDR3-B-37S6G9-72.0
M83513/09-G14 MCDR3-B-51S6G9-72.0
M83513/09-A15 MCDR3-B- 9S6Q1-72.0
M83513/09-B15 MCDR3-B-15S6Q1-72.0
Military Part No. MICRODOT Part No.
M83513/12-H03*P MCK-**-P-100PRT1B
M83513/13-A01*N MCK-**-B- 9SRT1
M83513/13-B01*N MCK-**-B- 15SRT1
M83513/13-C01*N MCK-**-B- 21SRT1
M83513/13-D01*N MCK-**-B- 25SRT1
M83513/13-E01*N MCK-**-B- 31SRT1
M83513/13-F01*N MCK-**-B- 37SRT1
M83513/13-A01*P MCK-**-P- 9SRT1
M83513/13-B01*P MCK-**-P- 15SRT1
M83513/13-C01*P MCK-**-P- 21SRT1
M83513/13-D01*P MCK-**-P- 25SRT1
M83513/13-E01*P MCK-**-P- 31SRT1
M83513/13-F01*P MCK-**-P- 37SRT1
M83513/13-A02*N MCK-**-B- 9SRT1A
M83513/13-B02*N MCK-**-B- 15SRT1A
M83513/13-C02*N MCK-**-B- 21SRT1A
M83513/13-D02*N MCK-**-B- 25SRT1A
M83513/13-E02*N MCK-**-B- 31SRT1A
M83513/13-F02*N MCK-**-B- 37SRT1A
M83513/13-A02*P MCK-**-P- 9SRT1A
M83513/13-B02*P MCK-**-P- 15SRT1A
M83513/13-C02*P MCK-**-P- 21SRT1A
M83513/13-D02*P MCK-**-P- 25SRT1A
M83513/13-E02*P MCK-**-P- 31SRT1A
M83513/13-F02*P MCK-**-P- 37SRT1A
M83513/13-A03*N MCK-**-B- 9SRT1B
M83513/13-B03*N MCK-**-B- 15SRT1B
M83513/13-C03*N MCK-**-B- 21SRT1B
M83513/13-D03*N MCK-**-B- 25SRT1B
M83513/13-E03*N MCK-**-B- 31SRT1B
M83513/13-F03*N MCK-**-B- 37SRT1B
M83513/13-A03*P MCK-**-P- 9SRT1B
M83513/13-B03*P MCK-**-P- 15SRT1B
M83513/13-C03*P MCK-**-P- 21SRT1B
M83513/13-D03*P MCK-**-P- 25SRT1B
M83513/13-E03*P MCK-**-P- 31SRT1B
M83513/13-F03*P MCK-**-P- 37SRT1B
M83513/14-G01*N MCK-**-B- 51SRT1
M83513/14-G01*P MCK-**-P- 51SRT1
M83513/14-G02*N MCK-**-B- 51SRT1A
M83513/14-G02*P MCK-**-P- 51SRT1A
M83513/14-G03*N MCK-**-B- 51SRT1B
M83513/14-G03*P MCK-**-P- 51SRT1B
M83513/15-H01*N MCK-**-B-100SRT1
M83513/15-H01*P MCK-**-P-100SRT1
M83513/15-H02*N MCK-**-B-100SRT1A
M83515/15-H02*P MCK-**-P-100SRT1A
Military Part No. MICRODOT Part No.
M83513/10-A01*N MCK-**-B- 9PRT1
M83513/10-B01*N MCK-**-B- 15PRT1
M83513/10-C01*N MCK-**-B- 21PRT1
M83513/10-D01*N MCK-**-B- 25PRT1
M83513/10-E01*N MCK-**-B- 31PRT1
M83513/10-F01*N MCK-**-B- 37PRT1
M83513/10-A01*P MCK-**-P- 9PRT1
M83513/10-B01*P MCK-**-P- 15PRT1
M83513/10-C01*P MCK-**-P- 21PRT1
M83513/10-D01*P MCK-**-P- 25PRT1
M83513/10-E01*P MCK-**-P- 31PRT1
M83513/10-F01*P MCK-**-P- 37PRT1
M83513/10-A02*N MCK-**-B- 9PRT1A
M83513/10-B02*N MCK-**-B- 15PRT1A
M83513/10-C02*N MCK-**-B- 21PRT1A
M83513/10-D02*N MCK-**-B- 25PRT1A
M83513/10-E02*N MCK-**-B- 31PRT1A
M83513/10-F02*N MCK-**-B- 37PRT1A
M83513/10-A02*P MCK-**-P- 9PRT1A
M83513/10-B02*P MCK-**-P- 15PRT1A
M83513/10-C02*P MCK-**-P- 21PRT1A
M83513/10-D02*P MCK-**-P- 25PRT1A
M83513/10-E02*P MCK-**-P- 31PRT1A
M83513/10-F02*P MCK-**-P- 37PRT1A
M83513/10-A03*N MCK-**-B- 9PRT1B
M83513/10-B03*N MCK-**-B- 15PRT1B
M83513/10-C03*N MCK-**-B- 21PRT1B
M83513/10-D03*N MCK-**-B- 25PRT1B
M83513/10-E03*N MCK-**-B- 31PRT1B
M83513/10-F03*N MCK-**-B- 37PRT1B
M83513/10-A03*P MCK-**-P- 9PRT1B
M83513/10-B03*P MCK-**-P- 15PRT1B
M83513/10-C03*P MCK-**-P- 21PRT1B
M83513/10-D03*P MCK-**-P- 25PRT1B
M83513/10-E03*P MCK-**-P- 31PRT1B
M83513/10-F03*P MCK-**-P- 37PRT1B
M83513/11-G01*N MCK-**-B- 51PRT1
M83513/11-G01*P MCK-**-P- 51PRT1
M83513/11-G02*N MCK-**-B- 51PRT1A
M83513/11-G02*P MCK-**-P- 51PRT1A
M83513/11-G03*N MCK-**-B- 51PRT1B
M83513/11-G03*P MCK-**-P- 51PRT1B
M83513/12-H01*N MCK-**-B-100PRT1
M83513/12-H01*P MCK-**-P-100PRT1
M83513/12-H02*N MCK-**-B-100PRT1A
M83513/12-H02*P MCK-**-P-100PRT1A
M83513/12-H03*N MCK-**-B-100PRT1B
Military Part No. MICRODOT Part No.
MCK (Metal Shell)
M83513/09-C16 MCDR3-B-21S6Q9-72.0
M83513/09-D16 MCDR3-B-25S6Q9-72.0
M83513/09-E16 MCDR3-B-31S6Q9-72.0
M83513/09-F16 MCDR3-B-37S6Q9-72.0
M83513/09-G16 MCDR3-B-51S6Q9-72.0
Military Part No. MICRODOT Part No.
M83513/09-C15 MCDR3-B-21S6Q1-72.0
M83513/09-D15 MCDR3-B-25S6Q1-72.0
M83513/09-E15 MCDR3-B-31S6Q1-72.0
M83513/09-F15 MCDR3-B-37S6Q1-72.0
M83513/09-G15 MCDR3-B-51S6Q1-72.0
M83513/09-A16 MCDR3-B- 9S6Q9-72.0
M83513/09-B16 MCDR3-B-15S6Q9-72.0
Military Part No. MICRODOT Part No.
Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
35
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
MCK (Metal Shell) (Continued)
M83515/18-H02*P MCK-**-P-100PRT3A
M83513/18-H03*N MCK-**-B-100PRT3B
M83513/18-H03*P MCK-**-P-100PRT3B
M83513/19-A01*N MCK-**-B- 9SRT3
M83513/19-B01*N MCK-**-B- 15SRT3
M83513/19-C01*N MCK-**-B- 21SRT3
M83513/19-D01*N MCK-**-B- 25SRT3
M83513/19-E01*N MCK-**-B- 31SRT3
M83513/19-F01*N MCK-**-B- 37SRT3
M83513/19-A01*P MCK-**-P- 9SRT3
M83513/19-B01*P MCK-**-P- 15SRT3
M83513/19-C01*P MCK-**-P- 21SRT3
M83513/19-D01*P MCK-**-P- 25SRT3
M83513/19-E01*P MCK-**-P- 31SRT3
M83513/19-F01*P MCK-**-P- 37SRT3
M83513/19-A02*N MCK-**-B- 9SRT3A
M83513/19-B02*N MCK-**-B- 15SRT3A
M83513/19-C02*N MCK-**-B- 21SRT3A
M83513/19-D02*N MCK-**-B- 25SRT3A
M83513/19-E02*N MCK-**-B- 31SRT3A
M83513/19-F02*N MCK-**-B- 37SRT3A
M83513/19-A02*P MCK-**-P- 9SRT3A
M83513/19-B02*P MCK-**-P- 15SRT3A
M83513/19-C02*P MCK-**-P- 21SRT3A
M83513/19-D02*P MCK-**-P- 25SRT3A
M83513/19-E02*P MCK-**-P- 31SRT3A
M83513/19-F02*P MCK-**-P- 37SRT3A
M83513/19-A03*N MCK-**-B- 9SRT3B
M83513/19-B03*N MCK-**-B- 15SRT3B
M83513/19-C03*N MCK-**-B- 21SRT3B
M83513/19-D03*N MCK-**-B- 25SRT3B
M83513/19-E03*N MCK-**-B- 31SRT3B
M83513/19-F03*N MCK-**-B- 37SRT3B
M83513/19-A03*P MCK-**-P- 9SRT3B
M83513/19-B03*P MCK-**-P- 15SRT3B
M83513/19-C03*P MCK-**-P- 21SRT3B
M83513/19-D03*P MCK-**-P- 25SRT3B
M83513/19-E03*P MCK-**-P- 31SRT3B
M83513/19-F03*P MCK-**-P- 37SRT3B
M83513/20-G01*N MCK-**-B- 51SRT3
M83513/20-G01*P MCK-**-P- 51SRT3
M83513/20-G02*N MCK-**-B- 51SRT3A
M83513/20-G02*P MCK-**-P- 51SRT3A
M83513/20-G03*N MCK-**-B- 51SRT3B
M83513/20-G03*P MCK-**-P- 51SRT3B
M83513/21-H01*N MCK-**-B-100SRT3
M83513/21-H01*P MCK-**-P-100SRT3
M83513/21-H02*N MCK-**-B-100SRT3A
M83515/21-H02*P MCK-**-P-100SRT3A
Military Part No. MICRODOT Part No. M83513/21-H03*N MCK-**-B-100SRT3B
M83513/21-H03*P MCK-**-P-100SRT3B
M83513/22-A01*N MCK-**-B- 9PST1
M83513/22-B01*N MCK-**-B- 15PST1
M83513/22-C01*N MCK-**-B- 21PST1
M83513/22-D01*N MCK-**-B- 25PST1
M83513/22-E01*N MCK-**-B- 31PST1
M83513/22-F01*N MCK-**-B- 37PST1
M83513/22-A01*P MCK-**-P- 9PST1
M83513/22-B01*P MCK-**-P- 15PST1
M83513/22-C01*P MCK-**-P- 21PST1
M83513/22-D01*P MCK-**-P- 25PST1
M83513/22-E01*P MCK-**-P- 31PST1
M83513/22-F01*P MCK-**-P- 37PST1
M83513/22-A02*N MCK-**-B- 9PST1A
M83513/22-B02*N MCK-**-B- 15PST1A
M83513/22-C02*N MCK-**-B- 21PST1A
M83513/22-D02*N MCK-**-B- 25PST1A
M83513/22-E02*N MCK-**-B- 31PST1A
M83513/22-F02*N MCK-**-B- 37PST1A
M83513/22-A02*P MCK-**-P- 9PST1A
M83513/22-B02*P MCK-**-P- 15PST1A
M83513/22-C02*P MCK-**-P- 21PST1A
M83513/22-D02*P MCK-**-P- 25PST1A
M83513/22-E02*P MCK-**-P- 31PST1A
M83513/22-F02*P MCK-**-P- 37PST1A
M83513/22-A03*N MCK-**-B- 9PST1B
M83513/22-B03*N MCK-**-B- 15PST1B
M83513/22-C03*N MCK-**-B- 21PST1B
M83513/22-D03*N MCK-**-B- 25PST1B
M83513/22-E03*N MCK-**-B- 31PST1B
M83513/22-F03*N MCK-**-B- 37PST1B
M83513/22-A03*P MCK-**-P- 9PST1B
M83513/22-B03*P MCK-**-P- 15PST1B
M83513/22-C03*P MCK-**-P- 21PST1B
M83513/22-D03*P MCK-**-P- 25PST1B
M83513/22-E03*P MCK-**-P- 31PST1B
M83513/22-F03*P MCK-**-P- 37PST1B
M83513/23-G01*N MCK-**-B- 51PST1
M83513/23-G01*P MCK-**-P- 51PST1
M83513/23-G02*N MCK-**-B- 51PST1A
M83513/23-G02*P MCK-**-P- 51PST1A
M83513/23-G03*N MCK-**-B- 51PST1B
M83513/23-G03*P MCK-**-P- 51PST1B
M83513/24-H01*N MCK-**-B-100PST1
M83513/24-H01*P MCK-**-P-100PST1
M83513/24-H02*N MCK-**-B-100PST1A
M83515/24-H02*P MCK-**-P-100PST1A
M83513/24-H03*N MCK-**-B-100PST1B
Military Part No. MICRODOT Part No. M83513/24-H03*P MCK-**-P-100PST1B
M83513/25-A01*N MCK-**-B- 9SST1
M83513/25-B01*N MCK-**-B- 15SST1
M83513/25-C01*N MCK-**-B- 21SST1
M83513/25-D01*N MCK-**-B- 25SST1
M83513/25-E01*N MCK-**-B- 31SST1
M83513/25-F01*N MCK-**-B- 37SST1
M83513/25-A01*P MCK-**-P- 9SST1
M83513/25-B01*P MCK-**-P- 15SST1
M83513/25-C01*P MCK-**-P- 21SST1
M83513/25-D01*P MCK-**-P- 25SST1
M83513/25-E01*P MCK-**-P- 31SST1
M83513/25-F01*P MCK-**-P- 37SST1
M83513/25-A02*N MCK-**-B- 9SST1A
M83513/25-B02*N MCK-**-B- 15SST1A
M83513/25-C02*N MCK-**-B- 21SST1A
M83513/25-D02*N MCK-**-B- 25SST1A
M83513/25-E02*N MCK-**-B- 31SST1A
M83513/25-F02*N MCK-**-B- 37SST1A
M83513/25-A02*P MCK-**-P- 9SST1A
M83513/25-B02*P MCK-**-P- 15SST1A
M83513/25-C02*P MCK-**-P- 21SST1A
M83513/25-D02*P MCK-**-P- 25SST1A
M83513/25-E02*P MCK-**-P- 31SST1A
M83513/25-F02*P MCK-**-P- 37SST1A
M83513/25-A03*N MCK-**-B- 9SST1B
M83513/25-B03*N MCK-**-B- 15SST1B
M83513/25-C03*N MCK-**-B- 21SST1B
M83513/25-D03*N MCK-**-B- 25SST1B
M83513/25-E03*N MCK-**-B- 31SST1B
M83513/25-F03*N MCK-**-B- 37SST1B
M83513/25-A03*P MCK-**-P- 9SST1B
M83513/25-B03*P MCK-**-P- 15SST1B
M83513/25-C03*P MCK-**-P- 21SST1B
M83513/25-D03*P MCK-**-P- 25SST1B
M83513/25-E03*P MCK-**-P- 31SST1B
M83513/25-F03*P MCK-**-P- 37SST1B
M83513/26-G01*N MCK-**-B- 51SST1
M83513/26-G01*P MCK-**-P- 51SST1
M83513/26-G02*N MCK-**-B- 51SST1A
M83513/26-G02*P MCK-**-P- 51SST1A
M83513/26-G03*N MCK-**-B- 51SST1B
M83513/26-G03*P MCK-**-P- 51SST1B
M83513/27-H01*N MCK-**-B-100SST1
M83513/27-H01*P MCK-**-P-100SST1
M83513/27-H02*N MCK-**-B-100SST1A
M83515/27-H02*P MCK-**-P-100SST1A
M83513/27-H03*N MCK-**-B-100SST1B
M83513/27-H03*P MCK-**-P-100SST1B
Military Part No. MICRODOT Part No.
*C = Cadmium or N = Nickel (space applications only)
**C2 = Cadmium or N1 = Nickel (space applications only)
Microminiature D Connectors
Engineering Notes
36 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
37
Introduction
Twist Pin contact High
Density Microminiature
Connectors described in
this catalog comprise a
complete contact system
which is adaptable to a
numerous variety of form
factors. Precise contact
alignment, with extremely
low engaging forces, results
from the manner in which
the Twist Pin contact
system is packaged —
by constructing the male
contact as a breathing
helical spring, electrical
contact is achieved at many
points around the periphery
of the pin bundle.
Featured in this catalog is
the twist pin contact line,
which accommodates
round wire and Flat
Conductor Cable (FCC),
EdgeboardConnectors.
Applications requiring
frequent mating and discon-
nect call for the metal shell
connector version. This
style connector promotes
high durability and reliability.
Designed for both military
and commercial applica-
tions, this latest innovation
is especially well-suited to
use in external conditions.
This catalog also features
light-weight plastic
connectors in a strip (MCS)
format as well as JACKMATE
Connectors (MCJ Series)
format for small package
application requiring high
reliability.
Edgeboard applications are
covered in this catalog with
aspecial High Density
Standard Module (HDSM)
Connector as well as
MIL-DTL-55302 (MCEM)
Connectors. The high
mating forces of these larger
connectors aregreatly
reduced with the use of the
low force twist pins and
sockets which are standard
for this product line.
Product Facts
nDesigned for both military
and commercial applications
nWell-suited for external
conditions
nPrecise contact alignment
with extremely low engaging
forces
nProduct offering consists of
metal shell, plastic shell,
panel mount, printed circuit
board and strip connectors
nMetal shell connector
promotes high durability
and reliability
Rectangular
Connectors
2
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
38
Twist Pin Contact Data
Twist Pin — 24 gauge
Pin and Socket Contacts
The contact spring member
normally found in socket
contacts has been eliminat-
ed by creating a breathing
helical spring principle on
the pin contact — smaller,
more durable contacts
can be manufactured
economically. Wire range 24-36 AWG solid & stranded.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
39
Rectangular
Connectors
2
MCE Series Plastic Shell Edgeboard Connectors
Plastic Shell Edge Board
Connectors
Designed for commercial
applications requiring
frequent disconnect and
connect, including data
recorders and computers.
Mother board connector
can be ordered to fit any
pattern on your circuit
board.
This new connector features
the proven twist pin contact
with precision contact align-
ment with extremely low
engaging forces.
Units are available with con-
tacts as few as 40 and as
many as 110. Wire sizes 28
through 24, any type of plat-
ing or color coding, any
kind of wire termination
including wirewrap — a
high degree of flexibility for
your military or commercial
application.
Two hexagonal polarizing
keys can provide up to 36
different key combinations
are supplied.
40Contacts
Technical & Performance Data — Twist Pin Plastic Shell Connectors
Electrical
Contact Resistance —The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms,
using standard 24 AWG solid copper
leads when measured directly behind the
crimp joints of the mated pin and socket
contacts. The average resistance value at
100 microvolts is 4.8 milliohms.
Dielectric Withstanding
Voltage —800 VAC RMS at sea level
(600 for solder pots); 200 VAC RMS at
70,000 feet [21,336m] (150 for solder
pots).
Corrosion Resistance (Per MIL-
STD-202C, Method 101B, Condition
B) — Both mated and unmated samples
do not exceed the maximum allowable
contact resistance (8 milliohms) when
subjected to the 48 hour salt spray test.
Durability —The contact resistance
after 500 mating cycles is less than the
maximum allowable, 8 milliohms.
Insulation Resistance — Greater than
5,000 megohms at room temperature.
Maximum Current Carrying
Capacity —No. 24 contact 3 amperes.
It must be recognized however, that all the
wires to a connector will not carry their
maximum current under all environmen-
tal conditions due to wire temperature.
Mechanical
Contact Engaging & Separation
Forces —8.0 oz. max. [2.24N] (eng.),
0.5 oz. min.[.14N] (sep.)
Environmental
TemperatureRange (Operating) —
-67°Fto 257°F[-55° C to +125°C].
Vibration (Per MIL-STD-202C,
Method 204A, Condition D) —No
discontinuity in excess of 1 µ sec. dur-
ing twelve 20 minute sweeps from 10 to
2000 CPS at .06 double amplitude or 20
Gforces, whichever is less.
Materials
Insulator —Liquid Crystal Polymer
(LCP) per ASTM D5138 or
Polyphenylene Sulfide per
MIL-M-24519.
Contacts —Pin-contact: Copper alloy
and beryllium copper alloy make up the
complete construction. Socket contact:
Copper alloy.
Hardware —Corrosion resistant
stainless steel.
Finishes
Insulator —None.
Contacts —Standard finish is
0.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Hardware —Passivated per QQ-P-35.
C
A
.071–.076
[1.80–1.93]
B
A
A
#24 AWG Copper Wire
.250
[6.35]
.250
[6.35]
Max.
Typ.
.100
[2.54]
Solder Dip Typ.
Min.
.2 00
±.015
[5.08
±.381
]
Typ.
Epoxy
Insulator
Socket Contact/
Lead Assembly
Section A-A
.250
[6.35]
.450
[11.43]
.030
[.762]Max.
Polarization Key Location
2 Plcs.
.2 75
[6.99]
2 Plcs.
Ø .093–.098 Thru .187
[2.36–2.49Thru 4.75]
(2 Plcs.)
(Far ear only)
.300
[7.62]
.180
[4.57]
.075
[1.91]
.050
[1.27]
Ø.187
[4.75]Thru
2 Plcs.
(Near Ear Only)
B4
B3
B2
B1
A1
A2
A3
A4
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
40
MCE Series Plastic Shell Edgeboard Connectors (Continued)
Mother Board (Pin Side)
.050
[1.27] Typ.
.075
[1.91]
.050
[1.27]
.100
[2.54] Typ.
.075
[1.91] Typ.
A
B
C
A
A
B
Polarization Key Location
2 Plcs.
.250
[6.35]
Ø.091–.098
[2.31–2.49]
2 Plcs.
B4
B3
B2
B1
A1
A2
A3
A4
Section A-A
Epoxy
25 AWG Copper
Wire, Gold Plated,
Solder Dipped
Insulator
Pin Contact/
Lead Assembly
.150
[3.81] Typ.
.250–.300
[6.35–7.62] Typ.
Detail B
.325–.375
[8.26–9.53] Typ.
.225
[5.72]
#2-56 UNC-2B Thd.
Hex Polarizing Key
2 Supplied (Loose Packed)
Daughter Board(Socket Side)
#2-56 UNC-2B Thd.
Hex Polarizing Key
2 Supplied (Loose Packed)
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
41
Rectangular
Connectors
2
MCE Series Plastic Shell Edgeboard Connectors (Continued)
Dimensions for .062 [1.57] PC Board
No. of ABC
Contacts ±.010 ± .005 Basic
[± .254] [± .127]
401.750 1.500 .950
44.45 38.10 24.13
44 1.850 1.600 1.050
46.99 40.64 26.67
80 2.750 2.500 1.950
69.85 63.50 49.53
110 3.500 3.250 2.700
88.90 82.55 68.58
Notes: For PC Boards of different widths, consult Tyco Electronics.
How To Specify
MCE R1 40 P 6 L 4 0.5Lead Length in Inches (min.)
X — Special, does not fit description below.
Insulation Color or Finish
1 — All white wire 4 — Gold plated 7 — Color coded per
2 — All yellow wire 5 — Tin dipped gold plated MIL-STD-681, System 1
3 — All gray wire 6 — Bare (unfinished) 8 — Special color code
9 — Ten solid color repeating
(starts with black)
Wire Size
4-24 AWG 5-25 AWG 6-26AWG 8-28 AWG 0-30 AWG
Connector Series
Material
R1 — Liquid Crystal Polymer or
Polyphenylene Sulfide
Layout
40, 44, 80, 110
Contact Type
P — Pin (Mother Board Connector)
S — Socket (Daughter Board Connector)
Z — Wire layout as shown on page 40.
S — Solder pots 26 AWG max.
Wire Type
*A — Type E, 7 strand *D — Type ET, 19 strand G — 19 strand per MIL-22759/11
*B — Type ET, 7 strand F — 7 strand per MIL-22759/11 26 AWG, 24 AWG
*C — Type E, 19 strand (#28 AWG only) L — Copper, solid
Q — Stranded per MIL-W-22759/33
*Per MIL-W-16878
Mounting —Holes on the Daughter Board side can be modified.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
42
MCEM Series Metal Shell Edgeboard Connectors
Metal Shell Edge Board
Connectors
nMeets MIL-DTL-55302
performance requirements
nLayouts 128 and 184 are QPL
to slash sheets 120, 121,
122 and 123
nConnectors are available in
40, 44, 80, 110, 128, 152,
and 184 positions
nUtilizes low force twist pins
and our low force sockets.
Mating forces in the 3 to 4
oz. [.83 to 1.11N] range per
contact are typical with low
force pin and low force
socket
nDesigned for surface
mounting and through-the-
boardmounting
nAvailable termination
nMother board (pin side) —
cactus bend
nDaughter board (socket
side) — coke bottle,
right-angle bend to “A”
or “B” side
nSolder pots, and variety
of other wire terminations
for pin and socket
connectors available at
customer’srequest
nTwo hexagonal polarizing
keys (per MIL-DTL-55302
slash sheet 124) are
provided. Jackscrew
hardware is available. For
programmable keying/
jacking modifications
consult Tyco Electronics
In addition to the plastic
versions of the 2 piece
edgeboardconnectors, a
metal shell assembly is
designed and tooled. The
metal shells are made of
aluminum alloy per QQ-A-
591. The insertmaterial is
Diallyl phthalate,
Polyphenylene sulfide
(Ryton) or Liquid Crystal
Polymer (LCP). The techni-
cal and performance data is
essentially the same as that
shown for the MCDM Series
on page 25. These are
rugged, durable connectors
and are ideal for use in
areas of high density pack-
aging and wherefrequent
connect and disconnects
are required. Designed
initially for applications in
airborne data recorders,
computers and associated
equipment in navigational
systems. The mother board
connector can be ordered
to fit any patternon the
circuit board. The units can
also be provided with con-
tacts on .100 [2.54] spacing
which results in .100 [2.54]
grid pattern.
Performance Data
Electrical
Contact Resistance —The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms.
The average resistance value at 100
microvolts is 4.8 milliohms.
Dielectric Withstanding Voltage —
800 VAC RMS at sea level (600 for
solder pots); 200 VAC RMS at 70,000
feet [21,336m] (150 for solder pots).
Durability —Less than the maximum
allowable, 8 milliohms after 500 mating
cycles.
Insulation Resistance — Greater than
5,000 megohms at room ambient tem-
perature.
Maximum Current Carrying
Capacity —No. 24 contact 3 amperes.
Mechanical
Contact Engaging & Separation
Forces —5.0 oz. max. [1.39N] (eng.),
0.5 oz. min. [.14N] (sep.).
Environmental
Temperature Range —
-67°F to 302°F [-55° C to +150°C] for
Diallyl Phthalate; -67°F to 257°F [-55°
Cto +125°C] for Polyphenylene Sulfide.
Vibration —No discontinuity in
excess of 1 µ sec. during twelve 20
minute sweeps from 10 to 2000 CPS at
.06 double amplitude or 20 G forces,
whichever is less.
Materials and Finish
Shells —High grade aluminum alloy,
electroless nickel plated per AMS 2404.
Insulator —Diallyl Phthalate per MIL-
M-14, Type SDG-F (for 128 & 184);
Polyphenylene Sulfide per MIL-M-
24519 (for 40, 44, 80, 110 & 152), or
Liquid Crystal Polymer per ASTM
D5138.
Contacts —Pin (low force): beryllium
and OFHC copper,gold plated. Socket
(low force): Copper alloy,gold plated.
Hardware —Corrosion resistant
stainless steel passivated.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
43
Rectangular
Connectors
2
MCEM Series Metal Shell Edgeboard Connectors (Continued)
Mother Board (Pin Side)
40, 44, 80, 110 &
128
Positions
No. of AB
Contacts ± .010 ± .005
[± .254] [± .127]
40 1.750 1.500
44.45 38.10
44 1.850 1.600
46.99 40.64
80 2.750 2.500
69.85 63.50
110 3.500 3.250
88.90 82.55
128 3.950 3.700
100.33 93.98
Note: For PC Boards of different widths, consult
Tyco Electronics.
Dimensions for .062 [1.57] PC Board
Items in bold italic are qualified to MIL-DTL-55302.
Configuration shown is per MIL-DTL-55302/120.
Section A-A
.325–.375
[8.26–9.53] Typ.
.260–.300
[6.60–7.62] Typ.
Polarizing Key Location
2 Plcs.
#2-56 UNC-2B Thd.
Pin Contact/Lead Assy.
Insulator Assy.
Epoxy
25 AWG Copper
Wire, Gold Plated,
Solder Dipped
Hex Polarizing Key
2 Supplied (Loose Packed)
A
A
A
B
.400
[10.16]
.050
[1.27]
.050
[1.27] .250
[6.35]
Ø .091–.098
[2.31–2.49]
.100
[2.54] Typ.
Typ.
.075
[1.91]
Typ.
.075
[1.91]
Typ.
.050
[1.27] Typ.
B4
B3
A1
A2
A3
A4
B2
B1
Thru
2 Plcs.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
44
MCEM Series Metal Shell Edgeboard Connectors (Continued)
Daughter Board
(Socket Side)
40, 44, 80, 110 &
128
Positions
MCE M1 128 L 6 L 4 0.5Lead Length in Inches (min.)
Z — Wire layout as illustrated.
Insulation Color or Finish
1 — All white wire 4 — Gold plated 7— Color coded per
2— All yellow wire 5—Tin dipped gold plated MIL-STD-681, System 1
3— All gray wire 6—Bare (unfinished) 8—Special color code
9—Ten solid color repeating
(starts with black)
Wire Size
4–24 AWG 5–25AWG 6–26 AWG 8–28 AWG 0–30AWG
Connector Series
Material
M1 — Metal Shell
Layout
40, 44, 80,110,128,152, 184
Contact Type
L—Low ForcePin (Mother BoardConnector)
SL — Low ForceSocket* (Daughter BoardConnector)
X—Special,does not fit description below.
S—Solder pots for 26 AWG max.
Wire Type
*A — TypeE,7strand *D — TypeET, 19strand G — 19strand per MIL-C-22759/11
*B — TypeET, 7strand F — 7strand per MIL-C-22759/11 26 AWG, 24 AWG
*C — TypeE, 19strand (#28 AWG only) L—Copper, solid
Q—Stranded per MIL-W-22759/33
*Per MIL-W-16878
Items in bold italic are qualified to MIL-DTL-55302.
Configuration shown is per MIL-DTL-55302/121. Polarization – Hexagonal hardware is supplied with connector.
Mounting — Standard mounting holes are shown. Consult Tyco Electronics for modifications.
How To Specify
.125
[3.18]
Section B-B
Section A-A
Retaining Pin
4 Supplied
(Loose Packed)
Polarizing Key
2 Supplied
(Loose Packed)
2 Plcs.
.060
[1.52] 3Plcs.
.030
[0.76] Max.
.250
[6.35] Max.
.050
[1.27] Typ.
Typ.
.250
[6.35]
.050
[1.27] .050
[1.27]
2 Plcs.
.180
[4.57]
2 Plcs.
.330
[8.38]
2 Plcs.
Retaining Pin Holes
4 Plcs.
Polarizing Key Location
2 Plcs.
.275
[6.99]
.150
[3.81] Min.
Solder Dip Typ.
.071
[1.80]
.200
±.015
[5.08
±.381
]Min.
at B
Epoxy
Insulator Assy.
Skt. Contact/
Lead Assy.
24AWG
Copper Wire,
Gold Plated
Ø.187
[4.75] Thru 1 Wall
Ø.091–.098
[2.31–2.49]
C’Bore Ø.187 [4.75] x
.045 [1.14] Deep
(A Side Only)
.071–.076
[1.80–1.93]
2 Plcs.
.250
[6.35]
B
A
B
B2
A2 A1
B1
A
A
B
Thru Hole
2 Plcs.
Note: Board thickness .070 [1.78] Max.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
45
Rectangular
Connectors
2
MCEM Series Metal Shell Edgeboard Connectors (Continued)
Mother Board (Pin Side)
152 &
184
Positions
A
B
C
.250
[6.35]
.270
[6.86]
.400
[10.16]
Retaining Pin Hole
4 Plcs.
.343
[8.71] .500
[1.27]
B/2
.050
[1.27]
.075
[1.91]
Polarizing Key Location
2 Plcs.
A
A
A
B
B4
B3 B2
B1
A1
A2
A3
A4
Typ.
D
2 Plcs
.075
[1.91]
.250
[6.35]
.700
[17.78]
.242
[6.15]
.500
[12.70]
Ø.187Thru
[4.75] 3 Plcs.
(B Side Only)
.125
[3.18] .060
[1.52]
3 Plcs.
.071
[1.80]
.343
[8.71]
Min.
Retaining Pin Hole
4 Plcs.
Polarizing Key Locations
2 Plcs.
A
B
A
B
B
A
C
B3 B2
B1
B4
A4
A3 A1
A2
Typ.
.050
[1.27]Typ.
2 Plcs.
2 Plcs.
2 Plcs. DB/2
Ø.091-.098[2.31-2.49] Thru C'Bore
Ø.187[4.75] x .045 [1.14], 3 Plcs.,
(A Side Only)
Section B-B
Daughter Board(Socket Side)
152 &
184
Positions
No. of ABCD
Contacts ± .010 ± .005 Basic Basic
[± .254] [± .127]
152 4.550 4.300 4.750 1.850
115.57 109.22 120.65 46.99
184 5.800 5.550 5.000 2.250
147.32 140.97 127.00 57.15
.250–.300
[6.35–7.62].325–.375
[8.26–9.53]
.075
[1.91]
25 AWG
Copper Wire,
Gold Plated,
Solder Dipped
Insulator
Subassembly
#2-56 UNC-2B Thd.
Hex Polarizing Key
2Supplied (Loose Packed)
Section A-A
B2B1 A1
A2
Pin Contact/
Lead Assembly
.075
[1.91]Typ.Typ.
Typ.
Typ.
.200
[5.08]
.030
[.762]
.053
[1.35]
Min. at B
.250
[6.35]
24 AWG
Copper Wire,
Gold Plated
Section A-A
Polarizing Key
2 Supplied
(Loose Packed)
Retaining Pin
4 Supplied
(Loose Packed)
Max.
Typ.
Max.
Typ.
Epoxy
Skt. Contact/
Lead Assy.
Insulator
Assy.
.150
[3.81]
Min.
Typ.
Solder Dip
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
46
JACKMATE MCJ(M) Series Plastic (Metal) Shell Center Jackscrew Connectors
10 & 14 Contact Layout
.075
[1.91]
.165
[4.19]
.050
[1.27]Typ.
.570
[14.00]
.285
[7.24]
30
.165
[4.19]
.235
[5.97]
.075
[1.91]
.050
[1.27]
.470
[11.94]
Typ.
30
Bushing
Guide Pin
2 Plcs.
.120
[3.05]
Jackscrew
(.050 hex wrench
req'd to turn screw)
.300
[7.62]
JACKMATE Connectors are
the first Twist Pin contact
assemblies designed to
accommodate center
jackscrews that provide
jacking action when mating
or unmating the connectors.
Although the units were
initially developed for high
density cord-to-cordor
in-line applications, either
plug or receptacle can be
adapted to a PC board. The
jacking hardware consist of
athreaded bushing and a
captivated jackscrew which
are made of corrosion
resistant stainless steel
and are molded into the
JACKMATE Connector
Insulator.
The twist pin contacts are
on .050 [1.27] center-to-
center linear spacing and
contact terminations are
available in solid wire or
stranded wire. There is a
high degree of flexibility
with this JACKMATE con-
nector design for commer-
cial or military applications.
Available om MCJ(M) Series
Plastic (Metal) Shells.
10 Layout14 Layout Receptacle Plug
JACKMATE Technical & Performance Data for Plastic Shell
Electrical
Contact Resistance —The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms,
using standard24 AWG solid copper
leads when measured directly behind the
crimp joints of the mated pin and socket
contacts. The average resistance value at
100 microvolts is 4.8 milliohms.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
Solder Pots: 600 VAC at sea level; 150
VAC at 70,000 feet [21,336m]
Wire Terminations: 750 VAC at sea level;
200 VAC at 70,000 feet [21,336m].
Corrosion Resistance (Per MIL-STD-
202C, Method 101B, Condition B) —
Both mated and unmated samples do not
exceed the maximum allowable contact
resistance (8 milliohms) when subjected
to the 48 hour salt spray test.
Durability —The contact resistance
after 500 mating cycles is less than the
maximum allowable, 8 milliohms.
Insulation Resistance — Greater than
5,000 megohms at room temperature for
the materials listed under “Materials”.
Maximum Current Carrying
Capacity —No. 24 contact 3 amperes.
It must be recognized, however,that all
the wires to a connector will not carry
their maximum current under all
environmental conditions due to wire
temperature.
Mechanical
Contact Engaging & Separation
Forces —8.0 oz. max. [2.22N] (eng.),
0.5 oz. min. [.14N] (sep.).
Environmental
TemperatureRange (Operating) —
-67°Fto 257°F [-55° C to 125°C].
Vibration (Per MIL-STD-202C,
Method 204-A, Condition D) —No
discontinuity in excess of 1 µsec. dur-
ing twelve 20 minute sweeps from 10 to
2000 CPS at .06 double amplitude or 20
Gforces, whichever is less.
Materials
Insulator —Glass filled Nylon Type 6.
Contacts —Pin contact: copper alloy
and beryllium copper alloy make up the
complete construction; Socket contact:
copper alloy.
Hardware —Corrosive resistant stain-
less steel.
Finishes
Contacts —Standard finish is
0.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Hardware—Passivated Per QQ-P-35.
JACKMATE MCJ Series Plastic Shell Center Jackscrew Connectors
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
47
Rectangular
Connectors
2
JACKMATE MCJ Series Plastic Shell Center Jackscrew Connectors (Continued)
26, 38 & 46 Contact Layout
.075
[1.91]
.050
[1.27]
Typ.
.165
[4.19]
1.270
[32.26]
.635
[16.13]
.165
[4.19]
.585
[14.86]
1.170
[29.72]
.165
[4.19]
.870
[22.10]
.438
[11.13]
Guide Pin
.120
[3.05]
Jackscrew
#0-80
UNF-2A
Thd.
A
A
Bushing
#0-80 UNF-2B Thd.
.300
[7.62]
42 Layout 38 Layout 26 Layout Receptacle Section A-A
Plug
.305
[7.75]
.610
[15.49]
.285
[7.24]
.050
[1.27]Typ. .050
[1.27]Typ.
.120
[3.05]
Guide Pin
Bushing
#0-80 UNF-2B
Thd.
.300
[7.62]
Jackscrew
#0-80 UNF-2A
Thd.
10
61
7
7
16
14
1
20
36
46
27
11
26
14 1
15
1
21
20
42
38
20
21
1
Guide Pin
Guide Pin
Guide Pin Guide Pin Guide Pin Guide Pin
Guide Pin Guide Pin
Guide Pin
46 Layout Receptacle Plug
38 Positions 26 Positions 10 Positions
46 Positions 14 Positions 42 Positions
Contact Arrangement as Viewed from the Engaging Face of the Pin Side
Guide pin locations illustrated are for standards configuration only. Any location is available.
Guide pins are supplied in socket connectors and blank cavities are in pin connector.
MCJ B2 10 P 4 L 4 0.5Lead Length in Inches (min.)
Insulation Color or Finish
1 All white wire 4 Gold plated 7 Color coded per
2 All yellow wire 5 Tin dipped gold plated MIL-STD-681, System 1
3 All gray wire 6 Bare (unfinished) 8 Special color code
9 Ten solid color repeating
(starts with black)
Wire Size
4—24 AWG 5—25 AWG 6—26 AWG 8—28 AWG 0—30 AWG
Connector Series
Shell Material
B2 Glass filled nylon, type 6/10, blue
Layout (Positions)
10, 14, 26, 38, 42, 46
Contact Type
PPin
S Socket
X Special, does not fit description below.
S Solder pot for 26 AWG maximum stranded wire.
Wire Type
*A Type E, 7 strand *D Type ET, 19 strand G 19 strand per MIL-C-22759/11
*B Type ET, 7 strand F 7 strand per MIL-C-22759/11 26 AWG, 24 AWG
*C Type E, 19 strand (#28 AWG only) L Copper, solid
Q Stranded per MIL-W-22759/33
*Per MIL-W-16878
How ToSpecify
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
48
JACKMATE MCJM Series Metal Shell Center Jackscrew Connectors
Technical and Performance
Data for Metal Shell Electrical
Contact Resistance —The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms,
using standard 24 AWG solid copper
leads when measured directly behind the
crimp joints of the mated pin and socket
contacts. The average resistance value at
100 microvolts is 4.8 milliohms.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
Solder Pots: 600 VAC at sea level; 150
VAC at 70,000 feet [21,336m].
Wire Terminations: 750 VAC at sea level;
200 VAC at 70,000 feet [21,336m].
Corrosion Resistance (Per MIL-
STD-202C, Method 101B, Condition
B) — Both mated and unmated samples
do not exceed the maximum allowable
contact resistance (8 milliohms) when
subjected to the 48 hour salt spray test.
Durability —The contact resistance
after 500 mating cycles is less than the
maximum allowable, 8 milliohms.
Insulation Resistance — Greater than
5,000 megohms at room temperature for
the materials listed under “Materials”.
Maximum Current Carrying
Capacity —No. 24 contact 3 amperes.
It must be recognized, however, that all
the wires to a connector will not carry
their maximum current under all envi-
ronmental conditions due to wire tem-
perature.
Mechanical
Contact Engaging & Separation
Forces —8.0 oz. max. [2.22N] (eng.),
0.5 oz. min.[.14N] (sep.).
Environmental
Temperature Range (Operating) —
-67°F to 302°F [-55°C to 150°C] for
Diallyl Phthalate.
Vibration (Per MIL-STD-202C,
Method 204-A, Condition D) —No
discontinuity in excess of 1 µ sec. dur-
ing twelve 20 minute sweeps from 10 to
2000 CPS at .06 double amplitude or 20
Gforces, whichever is less.
Materials
Insulator —Diallyl Phthalate per MIL-
M-14, Type SDG-F.
Contacts —Pin contact: copper alloy
and beryllium copper alloy make up the
complete construction; Socket contact:
copper alloy.
Body Shells —Pin body shell: stain-
less steel, Types 304, Condition A per
QQ-S-766; Socket body shell: aluminum
alloy per QQ-A-591, A-380 alloy.
Hardware —Corrosion resistant
stainless steel.
Finishes
Contacts —Standard finish is
0.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Body Shells —Pin body shell: passi-
vated per MIL-F-14072 (E-300); Socket
body shell: electroless nickel per AMS
204, Class 3, except thickness is
0.001/0.0015 [0.025/0.038].
Hardware —Passivated per
QQ–P–35.
Note: Insulators are molded into
their metal shells —
No bonded joint is used.
*Standard material used unless
otherwise specified.
BPolarization
APolarization
Insert
Shell
Contact Pin
Jackscrew 2-56 UNC-2B Thd.
.300
[7.62]
.199
[5.05]
.180
[4.57] .187
[4.75]
.830
[21.08]
.125
[3.18]
.350
[8.89]
#41
#1
#48
Rad.
Typ.
.046
[1.17] #10
Rad.
Typ.
.078
[1.98] Hex
Socket
Jackscrew
Plug (Pin Side)
Shell Type M1
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
49
Rectangular
Connectors
2
JACKMATE MCJM Series Metal Shell Center Jackscrew Connectors (Continued)
Receptacle (Socket Side)
Shell Type M1
Bushing
APolarization
BPolarization
Rad.
2 Plcs.
#48
#1 #10
#41
Sq.
.125
[3.18]
Rad.
2 Plcs.
.046
[1.17]
Rad.
4 Plcs.
.030
[0.76]
2 Plcs.
.050
[1.27]
2 Plcs.
.160
.005
[4.06
0.13
]
BSC
Typ.
.050
[1.27]
BSC
Typ.
.050
[1.27]
.830
[21.08] .125
[3.18]
+.010
–.005
+0.25
–0.13
.355
[9.02]
Full Rad. Typ.
Interfacial Seal Silicon Rubber
.310
[7.87]
2 Plcs.
.108
±.005
[2.74
±0.13
]
2 Plcs.
.094
±.005
[2.39
±0.13
]
Insert
Contact Skt.
Bushing Stainless Steel 2-56 UNC-2B Thd.
Rad.
2 Plcs.
.094
[2.39]
.070
±.005
[1.78
±0.13
]
2 Plcs. .200
±.005
[5.08
±0.13
]
2 Plcs.
Shell Type M2
#48
#1 #10
#41
48 P 4 L 4 0.5Lead Length in Inches (min.)
Insulation Color or Finish
1 All white wire 4 Gold plated 7 Color coded per
2 All yellow wire 5 Tin dipped gold plated MIL-STD-681, System 1
3 All gray wire 6 Bare (unfinished) 8 Special color code
9 Ten solid color repeating
(starts with black)
Wire Size
4—24 AWG 5—25 AWG 6—26 AWG 8—28 AWG 0—30 AWG
MCJ M1 A
JACKMATE Connector Series
Shell Material
M1 Metal Shell (Standard)
M2 Metal Shell (Special receptacles only)
Polarizing Position
A, B
Layout (Positions)
48
Contact Type
PPin
S Socket
X Special, does not fit description below.
S Solder pot for 26 AWG maximum stranded wire.
Wire Type
*A Type E, 7 strand *D Type ET, 19 strand G 19 strand per MIL-C-22759/11
*B Type ET, 7 strand F 7 strand per 26 AWG, 24 AWG
*C Type E, 19 strand MIL-C-22759/11 L Copper, solid
(#28 AWG only) Q Stranded per MIL-W-22759/33
*Per MIL-W-16878
How ToSpecify
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
50
MCS Series Strip Connectors
Strip Connectors MCS Plastic Strip
How To Specify
26 P 6 A 1 18.0
Lead Length in Inches (min.)
Insulation Color or Finish
1 — All white wire 4 — Gold plated 7 — Color coded per
2 — All yellow wire 5 — Tinned MIL-STD-681, System 1
3 — All gray wire 6 — Bare (unfinished) 8 — Special color code
9 — Ten solid color repeating
(starts with black)
Wire Size
4–24 AWG 5–25 AWG 6–26 AWG 8–28 AWG 0–30 AWG
MCS AR 2
Connector Series
Insulator Type and Material
AR—Polyphenylene Sulfide per MIL-M-24519
or Liquid Crystal Polymer per ASTM D5138
Contact Locations
1 — Contact in every cavity
2 — Contact in every other cavity 1, 3, 5...
3 — Contact in every cavity except guide pin cavity in
each end cavity
4 — Contact in every other cavity 2, 4, 6... and
guide pin in each end cavity
X—Other than above
Standard Polarization
Guide pins are in socket connectors.
Blank cavities are in pin connectors.
Number of Cavities (120 Max.)
Contact Type
P—Pin S — Socket
X— Special, does not fit description below.
S — Solder pot for 26 AWG maximum stranded wire.
Wire Type
*A — Type E, 7 strand *D — Type ET, 19 strand G — 19 strand per MIL-22759/11
*B — Type ET, 7 strand F — 7 strand per 26 AWG, 24 AWG
*C — Type E, 19 strand MIL-22759/11 M— Copper, solid
(#28 AWG only) Q— Stranded per MIL-W-22759/33
*Per MIL-W-16878
A
A
.283
[7.19]
.070
[1.78]
Lead
Epoxy
Insulator
Pin Contact
Typ.
.035
[.889]
For Solid Wire
.125
[3.18]
For Insulated Wire
.050
[1.27]
Max.
Max.
Section A-A
C
Plug
B
B
Typ.
.070
[1.78]
Skt. Contact
Insulator
Epoxy
Lead .035
[.889]
For Solid Wire
.125
[3.18]
For Insulated Wire
.050
[1.27] .100
[2.54]
Max.
Max.
Section B-B
C
Receptacle
Part No. By Size C Max.
MCSAR*-1** .070 [1.78]
MCSAR*-2** .120 [3.05]
MCSAR*-3** .170 [4.32]
MCSAR*-4** .220 [5.59]
MCSAR*-5** .270 [6.86]
MCSAR*-6** .320 [8.13]
MCSAR*-7** .420 [10.67]
MCSAR*-8** .420 [10.67]
MCSAR*-9** .470 [11.94]
MCSAR*-10** .520 [13.21]
MCSAR*-11** .570 [14.48]
MCSAR*-12** .620 [15.75]
MCSAR*-13** .670 [17.02]
MCSAR*-14** .720 [18.29]
MCSAR*-15** .770 [19.56]
MCSAR*-16** .820 [20.83]
MCSAR*-17** .870 [22.10]
MCSAR*-18** .920 [23.37]
MCSAR*-19** .970 [24.64]
MCSAR*-20** 1.020 [25.91]
MCSAR*-21** 1.070 [27.18]
MCSAR*-22** 1.120 [28.45]
MCSAR*-23** 1.170 [29.72]
MCSAR*-24** 1.220 [30.99]
MCSAR*-25** 1.270 [32.26]
MCSAR*-26** 1.320 [33.53]
MCSAR*-27** 1.370 [34.80]
MCSAR*-28** 1.420 [36.07]
MCSAR*-29** 1.470 [37.34]
MCSAR*-30** 1.520 [38.61]
Part No. By Size C Max.
MCSAR*-31** 1.570 [39.88]
MCSAR*-32** 1.620 [41.15]
MCSAR*-33** 1.670 [42.42]
MCSAR*-34** 1.720 [43.69]
MCSAR*-35** 1.770 [44.96]
MCSAR*-36** 1.820 [46.23]
MCSAR*-37** 1.870 [47.50]
MCSAR*-38** 1.920 [48.77]
MCSAR*-39** 1.970 [50.04]
MCSAR*-40** 2.020 [51.31]
MCSAR*-41** 2.070 [52.58]
MCSAR*-42** 2.120 [53.85]
MCSAR*-43** 2.170 [55.12]
MCSAR*-44** 2.220 [56.39]
MCSAR*-45** 2.270 [57.66]
MCSAR*-46** 2.320 [58.93]
MCSAR*-47** 2.370 [60.20]
MCSAR*-48** 2.420 [61.47]
MCSAR*-49** 2.470 [62.74]
MCSAR*-50** 2.520 [64.01]
MCSAR*-51** 2.570 [65.28]
MCSAR*-52** 2.620 [66.55]
MCSAR*-53** 2.670 [67.82]
MCSAR*-54** 2.720 [69.09]
MCSAR*-55** 2.770 [70.36]
MCSAR*-56** 2.820 [71.63]
MCSAR*-57** 2.870 [72.90]
MCSAR*-58** 2.920 [74.17]
MCSAR*-59** 2.970 [75.44]
MCSAR*-60** 3.020 [76.71]
Part No. By Size C Max.
MCSAR*-61** 3.070 [77.98]
MCSAR*-62** 3.120 [79.25]
MCSAR*-63** 3.170 [80.52]
MCSAR*-64** 3.220 [81.79]
MCSAR*-65** 3.270 [83.06]
MCSAR*-66** 3.320 [84.33]
MCSAR*-67** 3.370 [85.60]
MCSAR*-68** 3.420 [86.87]
MCSAR*-69** 3.470 [88.14]
MCSAR*-70** 3.520 [89.41]
MCSAR*-71** 3.570 [90.68]
MCSAR*-72** 3.620 [91.95]
MCSAR*-73** 3.670 [93.22]
MCSAR*-74** 3.720 [94.49]
MCSAR*-75** 3.770 [95.76]
MCSAR*-76** 3.820 [97.03]
MCSAR*-77** 3.870 [98.30]
MCSAR*-78** 3.920 [99.57]
MCSAR*-79** 3.970 [100.84]
MCSAR*-80** 4.020 [102.11]
MCSAR*-81** 4.070 [103.38]
MCSAR*-82** 4.120 [104.65]
MCSAR*-83** 4.170 [105.92]
MCSAR*-84** 4.220 [107.19]
MCSAR*-85** 4.270 [108.46]
MCSAR*-86** 4.320 [109.73]
MCSAR*-87** 4.370 [111.00]
MCSAR*-88** 4.420 [112.27]
MCSAR*-89** 4.470 [113.54]
MCSAR*-90** 4.520 [114.81]
Part No. By Size C Max.
MCSAR*-91** 4.570 [116.08]
MCSAR*-92** 4.620 [117.35]
MCSAR*-93** 4.670 [118.62]
MCSAR*-94** 4.720 [119.89]
MCSAR*-95** 4.770 [121.16]
MCSAR*-96* 4.820 [122.43]
MCSAR*-97** 4.870 [123.70]
MCSAR*-98** 4.920 [124.97]
MCSAR*-99** 4.970 [126.24]
MCSAR*-100** 5.020 [127.51]
MCSAR*-101** 5.070 [128.78]
MCSAR*-102** 5.120 [130.05]
MCSAR*-103** 5.170 [131.32]
MCSAR*-104** 5.220 [132.59]
MCSAR*-105** 5.270 [133.86]
MCSAR*-106** 5.320 [135.13]
MCSAR*-107** 5.370 [136.40]
MCSAR*-108** 5.420 [137.67]
MCSAR*-109** 5.470 [138.94]
MCSAR*-110** 5.520 [140.21]
MCSAR*-111** 5.570 [141.48]
MCSAR*-112** 5.620 [142.75]
MCSAR*-113** 5.670 [144.02]
MCSAR*-114** 5.720 [145.29]
MCSAR*-115** 5.770 [146.56]
MCSAR*-116** 5.820 [147.83]
MCSAR*-117** 5.870 [149.10]
MCSAR*-118** 5.920 [150.37]
MCSAR*-119** 5.970 [151.64]
MCSAR*-120** 6.020 [152.91]
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
51
Rectangular
Connectors
2
High Density Standard Module (HDSM) Connectors
Features
nDesigned for surface
mounting on both daughter
board and mother board for
increased circuit density
nBasic design offers 38, 78,
120, 152, 200, 304, and 400
contact designs
nHigh reliability twist pin and
socket per MIL-DTL-83513
and MIL-DTL-55302
nConnector permits lateral
movement of daughter
board to accommodate
clamping of the heatsink
nPlated through-hole
mounting available
nAvailable with flying leads
nExtender card option
available
nTypical mating force for 304
contacts is 38 pounds
nDesigned to withstand vapor
phase soldering
nTwo rotatable (six position)
polarizing keys are provided
accommodating 36 possible
combinations
nJackscrew hardware
available; consult
Tyco Electronics
nDifferent modular inserts
may be specified to include
coax (Pixi/Con), fiber optic
or other special contacts
nInserts may be partially or
fully loaded and installed in
the connector shell in
various configurations
The MICRODOT HDSM
connector is designed for
4row .050 [1.27] pitch
density with a special low
force twist pin that meets
all requirements of MIL-
DTL-55302 and MIL-DTL-
83513. This high density
connector allows the use of
construction to double the
packaging density with
surface mount capability.
Performance Data Summary
Electrical
Contacts —Pin 24 AWG twist pin,
Socket #24 AWG, Wire range 24 AWG to
32 AWG solid and stranded.
Contact Resistance (voltage drop)—
25 millivolts max. at 3 amps, 25° ± 3° C.
Current Rating —3amps max. per
contact
Dielectric Withstanding Voltage —
Volts RMS 60 Hz at room ambient:
600 V for solder pots at sea level.
150 V for solder pots at 70,000 ft.
[21,336m]
500 V for wire terminations at sea level.
200 V for wire terminations at 70,000 ft.
Insulation Resistance —5,000
megohms min. at room ambient.
Magnetic Permeability —2mµ max.
Mechanical
Contact Spacing —.050 [1.27] centers
Contact Engagement &
Separation —5.0 oz max. [1.39N]
(eng.) 0.5 oz. min. [.14N] 3.5 oz. typ.
[.97N] (sep.) force.
Materials and Finishes
Contacts —Copper alloy plated with
.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Metal Shell —
Insulator — Liquid Crystal Polymer
(LCP) per ASTM D5138 or
Polyphenylene Sulfide per
MIL-M-24519
Body Shell — Aluminum alloy plated
Nickel, electroless per MIL-C-26074.
Environmental
Temperature Range —
-67°F to 257°F [-55° C to +125° C].
Vibration —No discontinuity in
excess of 1 micro sec. when tested in
accordance with MIL-STD-1344,
Method 2005, test Condition IV.
Insulator Retention —Inserts will
withstand a 50 lb. per squareinch load
in either direction.
Shock —No discontinuity in excess of
1micro sec. when tested in accordance
with MIL-STD-1344, Method 2004, test
Condition E.
Durability —No mechanical or electri-
cal defects detrimental to the function of
the connectors after 500 cycles of mat-
ing and unmating. (Caution: Mating
force increases during durability cycling
may be noted).
Humidity —After exposure to humidi-
ty as specified by MIL-STD-1344,
Method 1002, Type II, IR shall be 1
megohm min. immediately following
step 7a of Method 1002 and 1000
megohms min. after 24 hours of condi-
tioning per Method 1002.
Salt Spray —Connectors shall meet
the performance requirements of contact
resistance, mating and unmating forces,
and contact retention after being subject-
ed to the 48-hour 5% solution salt spray
test per MIL-STD-1344, Method 1001,
Condition B.
Crimp Termination Tensile
Strength —*Unassembled contacts
with crimped stranded wire terminations.
Wires will not pull out of contacts when
the following axial loads are applied:
24 AWG, 5 lbs., 26 AWG, 4 lbs.,
28 AWG, 3 lbs.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
52
High Density Standard Module (HDSM) Connectors (Continued)
A
B
38 & 78 Position Plug
Keying Hardware
.360
[9.14]
.050
[1.27]
B
A
Typ. Typ.
.050
[1.27]
Typ.
.025
[0.64] .150
[3.81]
.050
[1.27]
120, 152 & 200 Position Plug
(38 & 78) (120, 152 & 200)
A
CRef. A
A
A1
Mtg. Nut/Polarizing Key (Customer Installed)
2 Supplied (Packed Loose)
End Cav. A1 Near Side
End Cav. D1 Far Side
.290
[7.34]
.165
[4.19]
.505
[12.83]
.350
[8.89]
Marked As Shown
}
Min.
Ref.
2-56 UNC-2B Thd.
x.125 [3.17] DP
.290
[7.37]Ref.
.350
[8.89]Min.
Insulator
Pin Contact
Housing
Lead Organizer
28 AWG Wire
Solder Dipped
Ø.010 [0.25]
(All Leads)
Section A-A
C
C1
D1
C10 (20)
D9 (19)
A9 (19)
B10 (20) A1B1
C
C16 (20) (26)
C30 (38) (50)
A30 (38) (50)
B30 (38) (50)
D30 (38) (50) D1
A1
B1
C1
C15 (19) (25)
D15 (19) (25)
A15 (19) (25)
B15 (19) (25)
D16 (20) (26)
A16 (20) (26)
B16 (20) (26)
.050
[.127] .050
[.127]
.025
[0.64] D.200
[5.08]
.300
[7.62] .490
[12.50]Max.
Socket Side
Pin Side
Flat Screw
2-56 UNC-2A
Thd.
Flat Screw
2-56 UNC-2A
Thd.
Receptacle
Polarizing Key
2-56 UNC-2B
Thd.
Plug
Polarizing Key
2-56 UNC-2B
Thd.
A
B
C
D
.250
[6.35]
.050
[1.27]
2 Plcs.
.025
[0.64]
.050
[1.27]
Typ.
Typ.
B
A.050
[1.27].150
[3.81]
.360
[9.14]
304 & 400 Position Plug
A***
’A76’ (304) ’A100’ (400) Near Side Marking
’A1’ Near Side Marking
’D1’ Far Side Marking
’D76’ (304) ’D100’ (400) Far Side Marking
Mtg. Nut/Polarizing Key
(Customer To Install)
2Supplied (Packed Loose) A
A
A1
.050
[1.27]Ref. DRef. Standoff, 2-56 UNC-2B
Thd. x .125 [3.17] Min. Thd.
.165
[4.19]
.290
[7.34]
.505
[12.83]
2-56 UNC-2B Thd.
x.125 [3.17] DP
.290
[7.37]
.350
[8.89]
Min.
Ref.
.060
[1.52] .062
[1.58]
Thick
Pin Contact
Insulator
Housing
Lead
Organizer
28 AWG Wire
Solder Dipped
fl.010 [0.25]
(All Leads)
Section A-A
B76(100)
D76(100)
C75(99)
D75(99)
C76(100)
D76(100)
C75(99)
D75(99)
.100
[2.54]
.025
[0.64]
.050
[1.27] .075
[1.91]
Typ. Typ.
Typ.
Typ.
B59(77)
A59(77)
B58(76)
A58(76)
B56(74)
A56(74)
B57(75)
A57(75)
D58(76)
C58(76)
D59(77)
C59(77)
D57(75)
C57(75)
D56(74)
C56(74)
A40(52)
B39(51)
A39(51)
B40(52)
D40(52)
C39(51)
D39(51)
C40(52)
DTyp.
.050
[1.27]
C(2 Plcs.)
A37(49)
B37(49)
A38(50)
B38(50)
D37(49)
C37(49)
D38(50)
C38(50)
B21(27)
A21(27)
B20(26)
A20(26)
B18(24)
A18(24)
B19(25)
A19(25)
D20(26)
C20(26)
D21(27)
C21(27)
D19(25)
C19(25)
D18(24)
C18(24)
B1
A2
B2
A1
A4
B3
A3
B4
D4
C3
D3
C4C1
D2
C2
D1
C
L.250
[6.35]
.125
[3.18]Ref.
.460
[11.68] .590
[14.99]
.220
[5.59]
.100
[2.54]
.340
[8.64] Max.
Size 304 & 400 (Terminal Ident In Parentheses Is For Size 400)
2 Plcs.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
53
Rectangular
Connectors
2
High Density Standard Module (HDSM) Connectors (Continued)
.220
[5.59]
I.D. Of Bushing
Ø .062–.064
[1.57–1.61]
.195
[4.95]
C
D9(19)
C10(20)
A9(19)
B10(20)
C1D1
C1
B1
A1B1
A1
(38 & 78)
.226
[5.74]Typ. CD
(120, 152 & 200)
Flat Screw, 2 Supplied
2-56 UNC-2A Thd.
(Packed Loose)
Ø .132
[3.35]
ETorlon
Bushing
(4 Rqd)
Section B-B
-A-
.025
[0.64] .050
[1.27]
CRef.
DRef.
A
A
B
BA9(38)A19(76)A30(120)
A38(152)A50(200) Near Side Marking
D9(38)D19(76)D30(120)
D38(152)D50(200) Far Side Marking
.645
[16.38]
A1 Near Side Marking
D1 Far Side Marking
.160
[4.06]
.370
[9.40]
.545
[13.84]
.695
[17.65] .348
[8.84]
.050
[1.27]
Typ. At .545 [13.84] Dim.
.188
±.015
[4.78
± 0.38
]
Full Radius Typ.
Ø .008 M [.2.03] A M
.050
[1.27]
HRef. Dim.
GGage Dim.
FFree State
32 AWG,
Solder Dipped
Radius
Typ.
Typ.
C
LOf Radius
Of Leads
“Break Away”
Notch
(All Leads)
Housing
Insulator
Socket
Contact
Section A-A
B
.025
[0.64]
C
Typ.
.195
[4.95]Ref.
Size 38 & 78
B
A
38 & 78 Position Receptacle
A
B
.050
[1.27]
.025
[0.64]
Typ.
Typ.
.050
[1.27]
120, 152 & 200 Position Receptacle
.050
[1.27]
.150
[3.81]
.360
[9.14]
Polarizing Key, 2 Supplied
2-56 UNC-2B Thd.
(Packed Loose)
.050
[1.27] .195
[4.95]
.025
[0.64]Typ.
D
CTyp. Ref.
B
Size 120, 152 & 200
Recommended PCB Footprint Pattern
D1
Of
Mtg. Hole
C
L
BB/2(2 Plcs.)
D1
C1
B1
A1
Flat Head Screw (2 Plcs.)
2-56 UNC-2A Thd.
(Packed Loose, Customer To Install)
.226
[5.74]
.360
[9.14]
C(2 Plcs.)
.035
[0.89]
.018
[0.46] DTyp.
.195
[4.95]
2 Plcs.
1/2 B (2 Plcs.)
B
C(2 Plcs.)
Size 304 & 400
Recommended PCB Footprint Pattern
.025
[0.64]Typ.
Ø .008 M [.2.03] A M
(Typ.) At .545 [13.84] Dim. .160
[4.06]
.250
[6.35] Full
Radius
Typ. .050
[1.27]
D(4 Plcs.)
Typ.
Typ.
B
B
A
A
.370
[9.40]
.545
[13.84]
.645
[16.38] .695
[17.65]
A1 Near Side Marking
D1 Far Side Marking
A76(304) A100(400) Near Side Marking
D76(304) D100(400) Far Side Marking
Polarizing Key (2 Plcs.)
(Packed Loose, Customer To Install)
B
A
.250
[6.35]
.050
[1.27]
2 Plcs.
.025
[0.64] .050
[1.27]
Typ. Typ.
.150
[3.81]
.050
[1.27]
.348
[8.84]
.050
[1.27]
.188
±.015
[4.78
± 0.38
]
.050
[1.27]
HRef. Dim.
GGage Dim.
FFree State 32 AWG,
Solder Dipped
Radius
Typ.
Typ.
C
LOf Radius
Of Leads
“Break Away”
Notch
(All Leads)
Housing
Insulator
Socket
Contact
Section A-A
Of
Mtg. Hole
C
L
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
54
High Density Standard Module (HDSM) Connectors (Continued)
No. of Cavities A Dim. B Dim. C Dim. D Dim.
Single Bay
381.000 .840 .450 —
25.40 21.34 11.43
781.500 1.340 .950 —
38.10 34.04 24.13
120 2.050 1.890 1.500 .725
52.07 48.01 38.10 18.42
152 2.450 2.290 1.900 .925
62.23 58.17 48.26 23.50
200 3.050 2.890 2.500 1.225
77.47 73.41 63.50 31.12
Double Bay
304 4.600 4.440 1.900 .925
116.84 112.78 48.26 23.50
400 5.800 5.640 2.500 1.225
147.32 143.26 63.50 31.12
Dash No. Gap Between FDim. G Dim. HDim.
Bushing "E" (Ref.)
1.100 .120 .180 .330
2.54 3.05 4.57 8.38
2.093 .060 .150 .330
2.36 1.52 3.81 8.38
3.118 .235 .260 .483
2.99 5.97 6.60 12.27
4.145 .120 .180 .330
3.68 3.05 4.57 8.38
How To Specify
Table I
L 4 L 4 0.5
Wire Length
Wire Type
*A — Type E, 7 strand *D — Type ET, 19 strand G — 19 strand per MIL-W-22759/11
*B — Type ET, 7 strand F— 7 strand per MIL-W-22759/11 26 AWG, 24 AWG
*C — Type E, 19 strand (#28 AWG only) L — Copper, solid
Q— Stranded per MIL-W-22759/33
*Per MIL-W-16878
HDSM 1 152
Connector Series
Contact Location
1—Full complement of contacts
2 — Contacts in outside rowonly
3 — Contacts in inside rowonly
4—Other than above or special housing
Layout
38, 78, 120, 152, 200, 304&400
Contact Type
L — LowForce Pin
SL — LowForce Socket
Wire Size
4—24 AWG 5—25 AWG 6—26 AWG 8—28 AWG 0—30AWG
X— Special Wire and/or other than above
S— Solder pot
Z— Coke Bottle Termination (Receptacle only, see Table I)
ZA — 4RowWire Termination (Plug only)
ZB—8RowWire Termination (Plug only)
Wire Color/Finish
1 — All white 4 — Gold plated 7 — Color coded per MIL-STD-681,
2 — All yellow5 — Tin dipped gold plated System1
3 — All gray 6 — Bare (unfinished) 8 — Special color code
9 — Ten basic color repeating on
each row(A, B, C, D)
(starting with black)
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
55
Circular
Connectors
3
Introduction
Our high density,light-
weight Multi-Pin Circular
Connectors are the
industry’s most advanced
and are ideally suited to
applications where many
conductors must be accom-
modated in a minimum of
space with minimum weight.
All series of connectors
feature a crimp contact
retention method, requiring
no insertion or removal tools.
The MARC 43 Series
Connectors conform to
applicable performance
requirements of MIL-C-26482
and has seen extensive
service on many leading
aerospace and ground sup-
portequipment programs.
The MARC 53 Series
Connectors, designed to
conform to the USAF high
reliability specification
MIL-C-38300, as offers
high density connector
performance. The positive
lock coupling mechanism,
combined with our exclu-
sive floating interfacial seal,
offers outstanding perform-
ance under rigorous service
conditions.
The MARC 63 Series
Connectors, our Bayonet
Coupling Series, accommo-
dates all insert patterns
and layouts available in the
MARC 43 Series Connectors,
MARC 53 Series Connectors,
and RMD Series Connectors.
All insert assemblies are
completely interchange-
able. Lighter in weight and
smaller in size than any
comparable connector on
the market, it requires up
to 50% less engagement/
separation force. Conversion
to bayonet coupling shell
from MARC 43 Series
Connectors or MARC 53
Series Connectors is done
without tools by merely
transferring the contacts
and insert assemblies into
the MARC 63 Series
Connectors shell.
The newest addition to the
Multi-Pin product line is the
MARC 73 Series Connectors.
The twist pin Circular
Connector combines the
lightweight, bayonet
High Density Circular
Connectors
Product Facts
nHigh density, light-weight
Multi-Pin Circular
Connectors feature a crimp
contact retention method,
requiring no insertion or
removal tools
nReverse gender available
nIdeal for harsh environment
nSealed — Silicon rubber
grommet/o-ring
nUnsealed — No grommet/
o-ring
nMeets MIL Standards (high
quality) but is not QPL
qualified
nIdeally suited to applications
wheremany conductors
must be accommodated in
aminimum of space with
minimum weight
nMARC Series Connectors
arenon-magnetic
nContact rating 2.5A
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
56
Introduction (Continued)
coupling feature of the
MARC 63 Series Connectors
with the twist pin high densi-
ty, center-to-center contact
spacing of 0.065 [1.65]
inch. The utilization of 22
AWG twist pin and socket
contacts provide for 50%
greater contact densities
than presently offered in the
MARC 43 Series Connectors,
MARC 53 Series Connectors,
orMARC 63 Series
Connectors.
The MQR Series is a line of
circular quick disconnect
connectors for rugged
environmental use.
Consult Tyco Electronics for
detailed information.
SHM Receptacle
MARC 43 Series Connectors &
MARC 53 Series Connectors
Mated MARC 53
Series Connectors SHM Receptacle
MARC 43 Series Connectors &
MARC 53 Series Connectors
Mated MARC 43 Series ConnectorsMated MARC 63 Series Connectors
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
57
MARC 43 Series Connectors
Materials and Finishes MARC 43 Series Connector
housings and quick
disconnect couplings are
machined from bar stock
aluminum to combine maxi-
mum strength with minimum
weight. Threaded couplings
are machined from non-
magnetic, stainless steel
bar stock for durability of
the coupling threads.
Contacts are manufactured
from high conductivity
copper alloys which have
been selected for low
contact resistance over the
operating range of the
connectors. Inserts are
molded from flame-resist-
ant, glass-filled diallyl
phthalate, meeting ASTM
D5948 requirements. All
resilient parts are made of
high temperature, silicone
rubbers. Fuel resistant
compounds are used
where swelling affects the
performance of the
connector. All materials are
carefully selected for their
non-magnetic properties.
The standard finish is clear,
non-conductive anodize on
connector housings and
quick disconnect couplings.
For threaded coupling
applications, aluminum
components are hard, black
anodized, and stainless
steel plug coupling is
passivated with black oxide
finish. Conductive finish
modifications include gold,
cadmium, and iridite
finishes. Contacts are gold
plated per MIL-G-45204
requirements. See page 63
for modification information.
General Information
Service and Performance Data
Ahigh density (.080 [2.03]
contact centers), lightweight,
subminiature, cylindrical
connector series featuring
crimp contacts and finger-
tip, push-pull, quick discon-
nect coupling. This series
conforms to the applicable
performance requirements
of MIL-C-26482 and is
available in unsealed,
environmentally sealed, and
hermetic types.
Alarge assortment in insert
arrangements — accommo-
dating AWG 12 through 32
gauge wire and miniature
coaxial cables — is available
for the design engineer’s
choice. The contacts are
retained by shoulder
entrapment and can be
crimped with the standard
M22520 tools, using appro-
priate locators.
This proven series of con-
nectors has a long history of
outstanding performance
on many military and aero-
space programs. MARC 43
Series Connectors are ideal
for applications where high
performance must be
achieved at low cost.
I. Electrical — Electrical Ratings
Current RatingDielectric Working Voltage
Contact Amperes, Withstanding Sea 70,000 ft.
Size Max., +27°C1Voltage (RMS) Level [21,336 m] Alt.
22 AWG 5 amps 1000 750 300
16 AWG 20 amps 1000 750 300
12 AWG 50 amps 1000 750 300
50 ohm 3 amps 1000 750 300
75 ohm 3amps 1250 1000 300
95 ohm 3 amps 1500 1250 300
1Consult nomograph.
II. Mechanical —Durability: 500 Cycles Mate/Unmate.
Coupling/Uncoupling Forces and Tightening Torques:
Coupling/
Shell Uncoupling Tightening Torque (In-Lbs.)
Size Force Retaining Nut Mounting Nut
(In-Lbs.) Max.
A 13 [57.8 N] 20, Max. [2.26 Nm] 30-45 [3.39 Nm – 5.08 Nm]
B 17 [75.6 N] 20, Max. [2.26 Nm] 40-55 [4.52 Nm – 6.21 Nm]
C 21 [93.4 N] 20, Max. [2.26 Nm] 55-70 [6.21 Nm – 7.91 Nm]
Operating Temperature: -85°F to 257°F [-65°C to +125°C].
Contact Wire Conductor Dielectric Shield Jacket
Size Size Dia. Dia. Dia. Dia.2
(Stranded)1(Teflon)
22 22, 24, 26 .019-.032 ——
.039-.054
.482-.813 .990-1.37
16316, 18, 20 .038-.061 ——.065-.081
.965-1.55 1.65-2.06
12 12 AWG .071-.093 ——
.096-.120
1.80-2.36 2.44-3.05
50 ohm 50 ohm .013 Max. .032-.036 .048-.054 .065-.087
.330 .813-.914 1.22-1.37 1.65-2.21
75 ohm 75 ohm .013 Max. .060-.066 .078-.084 .096-.109
.330 1.52-1.68 1.98-2.13 2.44-2.77
95 ohm 95 ohm .013 Max. .100-.104 .115-.123 .137-.154
.330 2.54-2.64 2.92-3.12 3.48-3.91
1Tolerance of conductor diameters required for a reliable crimp. Smaller sizes
readily accommodated — consult Tyco Electronics.
2Smaller jacketed cable can be accommodated but environmental seal may
be impaired. Smooth extruded jacket should be used for consistent wire
sealing.
3Size 16 AWG Contact for size 20 AWG Wire – Use Tool 010-0080-0000.
Circular
Connectors
3
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
58
MARC 43 Series Connectors (Continued)
Test Data
Contact Arrangements1
“A Size” InsertLayouts
(A = ) Shell Size 9
MARC 43 Series Connectors meet the applicable performance requirements of specification MIL-C-26482 (Navy) to
include the following selected test parameters listed below:
DESCRIPTION
MIL-C-26482 Test Para TEST REQUIREMENTS
Insulation Resistance, Insulation resistance of unmated connectors shall be 5000 megohms, minimum
Room and High Temp., at room temperature and 2000 megohms, minimum, at 257°F [+125°C]
Para. 4.7.3 when measured per MIL-STD-202, Method 302, Test Condition B.
Dielectric Withstanding Voltage, No evidence of dielectric breakdown or flashover when mated and unmated
Para. 4.7.4 plugs are subjected to 1000 volts, rms, per MIL-STD-202, Method 301.
Durability, Plugs and receptacles designed to withstand up to 500 cycles of engagement
Para. 4.7.9 and separation without detrimental electrical or mechanical damage to the
connectors.
Corrosion, Unmated plugs and receptacles shall show no exposure of basis metal due
Para. 4.7.10 to corrosion which would affect electrical or mechanical performance of the
connectors after subjection to 24 hours exposure to salt spray atmosphere
per MIL-STD 202, Method 101.
Sweep Vibration, Mated connectors shall show no circuit interruptions greater than 10 micro-
Mated, Para. 4.7.11 seconds during 12 hours vibration to include six sweeps in two axes at
-67°F[-55°C], room temperature, and 257°F [+125°C] per MIL-STD-202, Method
204, Test Condition B. Post inspection shall show no detrimental cracking,
breaking, or loosening of parts.
Moisture Resistance, The insulation resistance of mated connectors shall exceed 100 megohms
Para. 4.7.13 and 4.7.13.1 after subjection to moisture resistance testing per MIL-STD-202, Method 106.
Contact Retention, Contacts shall withstand 15 lbs [66.7 N] axial load without axial displacement in
Para. 4.7.16 excess of 0.012 [0.305] or damage to contacts or inserts when the axial load is
applied to the mating end of the contacts in unmated plugs and receptacles
at a rate of approximately 1 lb/sec.
“B Size” Insert Layouts
(B = ) Shell Size 12
Notes: 1Views shown are front face view of receptacles. Front face view of plugs is mirror image of that shown.
2Arrow ( ) indicates insert top or vertical position in relation to top or vertical position of connector housings.
3Arrangement also available in hermetic seal receptacles.
“C Size” Insert Layouts
(C = ) Shell Size 15
Insert Arrangement 2-1 -2 -5 -11 -12 -14 -17 -21
Number of Contacts 719 2-22 AWG 7 12 7-22 AWG 4 6-16 AWG
Contact Size 50 Ohm 22 AWG 2-50 Ohm 16 AWG22 AWG 2-50 Ohm 16 AWG 1-50 Ohm
Insert Arrangement 2-9 -103-15 -19 -34 -37 -47 -49
Number of Contacts 12 37 13-22 AWG 12 5 13-22 AWG 5 29-22 AWG
Contact Size 50 Ohm 22 AWG 6-50 Ohm 16 AWG 95 Ohm 6-12 AWG 75 Ohm 2-16 AWG
InsertArrangement 2-3 -4 -7 -13 -27 -48
Number of Contacts 19 61 22-22 AWG 43-22 AWG 5-75 Ohm 12
Contact Size 50 Ohm 22 AWG 2-75 Ohm 2-50 Ohm 4-95 Ohm 75 Ohm
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
59
Circular
Connectors
3
MARC 43 Series Connectors (Continued)
Part Number and Ordering
Information MARC 43 Series Connector
part numbers indicate size,
shape, insert layout, type of
seal, style of contact and
polarization. Note: Pin or
socket (power or coaxial)
contacts may be used in
either plugs or receptacles.
However, it is recommend-
ed that pins be placed in
the receptacle when possi-
ble to take advantage of our
“scoop-proof” design. (The
style—pin or socket—of a
coaxial contact refers to the
outer contact body.)
Alternate Keying. Standard
alternate polarizing key posi-
tions are shown below. Addi-
tional polarizing keyways are
available upon request.
Supplemental Accessory
Hardware. We also manufac-
ture supplemental accesso-
ry hardware (protective cov-
ers, cable clamps, etc.) to
adapt these connectors to
almost any application. For
modifications to fit
your requirements, contact
Tyco Electronics.
Polarizing Key Positions
All MARC 43 Series
Connector multi-pin plugs
and receptacles are avail-
able in alternate polarizing
positions as listed below:
(1) Arrow ( ) indicates top
or vertical position (master
key-keyway) and coincides
with top or vertical position
of insert. This relationship
remains constant with alter-
nate polarizing key positions.
N—for Normal
Typical Part Number
Size A
Part No. X° Y°
A43****N 130 110
A43****-1 130 150
A43****-2 90 110
A43****-3 210 110
A43****-4 130 35
A43****-5 90 230
Size B
Part No. X° Y°
B43****N 130 110
B43****-1 130 90
B43****-2 130 145
B43****-3 105 110
B43****-4 155 110
B43****-5 80 110
B43****-6 190 110
B43****-7 130 170
B43****-8 215 110
B43****-9 80 230
B43****-10 130 30
Size C
Part No. X° Y°
C43****N 130 110
C43****-1 130 90
C43****-2 130 150
C43****-3 130 170
C43****-4 190 110
C43****-5 150 110
C43****-6 90 110
C43****-7 70 110
C43****-8 70 230
C43****-9 90 230
C43****-10 210 110
C43****11 30 110
C43****12 250 30
C43****13 130 30
C43****14 30 230
YX
(1)
A 43 E H 14 P 5 (***)
Modification
Designator
when
Applicable
(See Page 63)
P = Plug
PF = Plug, sq. flange mtg.
PT = Plug, threaded cpl. ring
H = Receptacle, single hole mtg.
F = Receptacle, box mtg.
FT = Receptacle, box mtg.
(threaded coupl.)
J= Receptacle, line cord
S = Receptacle, solder mount
(Hermetic)
B = Receptacle, thru-bulkhead,
double end (Hermetic)
P = Pin (male) power contacts
PP = Double end pins (type B only)
S = Socket (female) power
CP = Coaxial pin contact, or
combination of coaxial pin
andpin power contacts
CS = Coaxial socket contact, or
combination of coaxial socket
andsocket power contacts
Note: If P, S, CP, or CS does not appear in the numbering system,
nocontacts will be supplied with order (order separately).
Polarizing
Position
N, 1, 2, 3, 4,
etc.
Layout number
Denotes
Microdot
Series
Unsealed A
Hermetic H
Sealed E
Size A
Circular Size B
Size C
Use one only
Plug Receptacle
YX
(1)
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
60
MARC 43 Series Connectors (Continued)
Configurations
Type P
Straight Plug, Push-Pull
Coupling, Sealed or
Unsealed (Mates with
Receptacles, All Types)
Shell Dimensions
Size AB
A.766 1.578
19.46 40.08
B.953 1.656
24.21 42.06
C1.141 1.75
28.98 44.45
B
A
1.266
[32.16]
Type PF
Straight Plug, Square
Flange Mounting, Push-Pull
Coupling, Sealed or
Unsealed (Mates with
Receptacles, all Types.)
Shell Dimensions
Size ABCD
A.730 .664 .875 .750
18.54 16.86 22.23 19.05
B.920 .786 1.000 .940
23.37 19.96 25.40 23.88
C1.110 .924 1.125 1.130
28.19 23.47 28.58 28.70
.175
[4.44] .062
[1.57]
ADia. BTyp. CTyp.
.110 – .130
[2.79–3.30]Typ .
1.266
[32.16]
Type PT
Straight Plug, Threaded
Coupling, Sealed or
Unsealed (Mates with
Receptacles, Types H, HH,
and FT)
1.500
[38.1]
A
Lockwire Holes
Master Keyway
TThread
Max.
D
Panel Cutout
Shell Dimensions
Size AT(Class 2B)
A.813 5/8-32 UN
20.65
B1.000 13/16-28 UN
25.40
C1.19 1-28 UN
30.23
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
61
Circular
Connectors
3
MARC 43 Series Connectors (Continued)
Configurations (Continued)
Type H
Receptacle, Single Hole
Mounting
Sealed or Unsealed
(Mates with Plugs, Types P,
PF and PT)
Type 43F
Receptacle, Box Mounting,
Sealed or Unsealed (Mates
with Plugs, Types P and PF)
Shell Dimensions
Size ABCD
A.875 .594 .562 .595
22.23 15.08 14.27 15.11
B1.000 .786 .75 .783
25.40 19.96 19.05 19.89
C1.125 .906 .875 .960
28.58 23.01 22.23 24.38
A
Hex.
B
Hex.
.065–.085
[1.65–2.16] .080–.100
[2.03–2.54]
C
Hex.
1.36
[34.54]
.125
[3.17]
TThread
Master
Key
E
D
Panel Cutout
D
Panel Cutout
.065–.085
[1.65–2.16] .052–.072
[2.03–2.54]
C
Hex.
1.36
[34.54]
B
Typ.
A
Typ.
.110–.130
[2.79–3.30]Dia.
Typ.
Master Polarizing
Key
Note: Unless otherwise shown, tolerances are: Decimals ±.015 [±.381], fractions ±1⁄32.
Shell Dimensions
Size AB C D E T (Class 2A)
A.75 .687 .562 .607-.611 .625-.629 5/8-32 UN
19.05 17.45 14.27 15.42-15.52 15.8-15.97
B.937 .875 .75 .794-.798 .812-.816 13/16-28 UN
23.80 22.23 19.05 20.17-20.27 20.62-20.72
C1.125 1.062 .875 .975-.979 .999-1.003 1-28 UN
28.58 26.97 22.23 24.77-24.87 25.37-25.47
.313 [7.95] max. panel for P & PF
.109 [2.77] max. panel. for PT
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
62
MARC 43 Series Connectors (Continued)
Type J
Receptacle, Line Cord,
Sealed or Unsealed (Mates
with Plugs, Types P and PF)
A
B
C
Type FT
Receptacle, Box Mounting,
Threaded Coupling, Sealed
or Unsealed (Mates with
Plugs, Types PT, P and PF)
Shell Dimensions
Size A B C T (Class 2A) D
A.875 .594 .562 5/8-32 UN .645
22.23 15.08 14.27 16.38
B1.000 .786 .75 13/16-28 UN .832
25.40 19.96 19.05 21.13
C1.125 .906 .875 1-28 UN 1.020
28.58 23.01 22.23 25.90
Max. panel thickness is .125 [3.18].
.065–.085
[1.65–2.16] .052–.072
[2.03–2.54]
C
Hex.
1.36
[34.54]
B
Typ.
A
Typ.
.110–.130
[2.79–3.30]Dia.
Typ.
Master Polarizing
Key
TThread
D
Panel Cutout
Shell Dimensions
Size ABC
A1.703 1.36 .766
43.26 34.54 19.46
B1.781 1.36 .953
45.24 34.54 24.21
C1.875 1.36 1.141
47.63 34.54 28.98
Configurations (Continued)
Note: Unless otherwise shown, tolerances are: Decimals ±.015 [±.381], fractions ±1⁄32.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
63
Circular
Connectors
3
MARC 43 Series Connectors (Continued)
Accessories
Cable Clamps
A
B
.156
[3.96]
.156
[3.96]
C
D
A
B
Shell Size Part No. A [Max.] B [Max.]
A 086-0099-00X1 .704 .750
17.88 19.05
B086-0100-00X1 .773 .932
19.63 23.67
C 086-0101-00X1 .829 1.078
21.05 27.38
Shell Size Part No. A [Max.] B [Max.] C [Max.] D [Max.]
A 086-0103-00X1 .737 .600 1.100 .879
18.72 15.24 27.94 22.33
B086-0104-00X1 .913 .770 1.250 1.067
23.19 19.55 31.75 27.10
C 086-0105-00X1 1.048 .962 1.469 1.233
26.62 24.43 37.31 31.32
Straight Right-Angle
Contact Cavity Sealing Plugs (see page 80)
Contact Size Sealed Connector Unsealed Connector
PartNo. PartNo.
22 AWG 086-0055-0000 086-0001-0000
16AWG 086-0056-0000 086-0014-0000
12 A WG 086-0057-0000 086-0015-0000
50 ohm Coaxial 086-0058-0000 086-0061-0000
75 ohm Coaxial 086-0059-0000 086-0062-0000
95 ohm Coaxial 086-0060-0000 086-0063-0000
Protective Covers
Shell Receptacle Cover Part No.1Plug Cover Part No.1Dimensions (Max.)
Size With Chain Without Chain With Chain Without Chain A B C D
A086-0049-00J2 086-0073-00P1 086-0052-00J2 086-0076-00P1 .766 .950 .969 .913
19.46 24.13 24.62 23.19
B 086-0050-00J2 086-0074-00P1 086-0053-00J2 086-0077-00P1 .953 .950 1.156 .913
24.21 24.13 29.36 23.19
C 086-0051-00J2 086-0075-00P1 086-0054-00J2 086-0078-00P1 1.141 .950 1.344 .913
28.98 24.13 34.14 23.19
1For threaded plug (PT) and receptacle (FT) covers, consult Tyco Electronics. Wire rope/lanyard attachments and plastic protective caps also available,
consult Tyco Electronics.
A
B
C
D
Receptacle Cover Plug Cover
Modifications
The MARC 43 Series Connector modi-
fication identification system provides
alteration of standardMARC 43 Series
Connectors to include special finishes,
accessories, MARC 53 Series
Connector housings, and custom
quality assurance provisions —
processing, testing, serialization,
traceability. Consult your sales
representative or Tyco Electronics for
additional modification information.
Standardmodifications include:
(009): MARC 43 Series Connector,
anodized finish — black.
(048): MARC 43 Series Connector,
iridite finish — gold.
(056): MARC 43 Series Connector,
cadmium plated — clear.
(057): MARC 43 Series Connector
including cable clamp, straight
type.
(078): MARC 43 Series Connector
insertarrangement plus
MARC 53 Series Connector
positive lock coupling.
(094): MARC 43 Series Connector
coaxial insertarrangement to
include all-crimp coaxial contacts
plus MARC 53 Series Connector
positive lock coupling.
(098): MARC 43 Series Connector
connector including cable
clamp, right-angle type.
Contacts (see pages 78 and 79)
Contact Size Pin Part No. Socket Part No.
22AWG 083-0009-00R4 082-0464-00Y9
16AWG 083-0158-00R4 082-0113-00T1
12 AWG 083-0173-00R4 082-0132-00T1
50 ohm Coaxial 084-0024-00T2 084-0027-00T2
(Solder Type)
50 ohm Coaxial 141-1500-0001 142-1500-0001
(Crimp Type)
75 ohm Coaxial 084-0025-00T2 084-0028-00T2
95 ohm Coaxial 084-0026-00T2 084-0029-00T2
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
64
MARC 53 Series Connectors
Materials and Finishes
Housings and quick discon-
nect couplings aremachined
from bar stock aluminum to
combine maximum strength
with minimum weight.
Threaded couplings are
machined from non-mag-
netic, stainless steel bar
stock for durability of the
coupling threads. Contacts
aremanufactured from high
conductivity copper alloys
which have been selected
for low contact resistance
over the operating range of
the connectors. Inserts are
molded from flame-resistant,
glass-filled diallyl phthalate,
meeting ASTM D5948
requirements. All resilient
parts are made of high-
temperature, silicone
elastomers. Fuel resistant
compounds areused
where swelling affects the
performance of the
connector.All materials are
selected for their non-
magnetic properties.
The standard finish is hard
black, non-conductive,
anodized finish on connector
housings and quick discon-
nect couplings; stainless
steel threaded coupling is
passivated with black oxide
finish. Conductive finish
modifications include gold
finish and electroless nickel
finish. Multi-finish modifica-
tions for connector plugs
include black anodized
disconnect coupling with
conductive finish on shell
grounding members.
Contacts are gold plated
per MIL-G-45204 require-
ments. See Page 73 for
modification information.
General Information
The MARC 53 Series
Connector family represents
amajor advancement in the
design of high density (.080
[2.03] contact centers), sub-
miniature, power and coaxi-
alcontact connectors. The
MARC 53 Series Connectors
consists of two connector
styles — the Military
approved MD53 featuring
shoulder entrapped con-
tacts, and the new RMD53
utilizing rear insertable/
removable contacts.
MARC 53 Series Connectors
combine positive lock —
the rugged, push-pull, lock-
coupling mechanism — with
the unique positive seal
multiple sealing system.
Positive lock is our new fin-
ger-tip, push-pull coupling
with the safety lock feature,
and is the only connector
made with positive “blind
mating” indication. When the
plug is fully engaged, the
coupling ring can be rotated
45° to the safety lock
position; if the plug is not
completely engaged, the
coupling ring cannot be
turned to the safety lock
position. Consequently,
under “blindmating” condi-
tions, it is always possible
todetermine if the plug is
properly engaged without
visual reference, damage, or
accidental disengagement.
The environmental integrity
is guaranteed by multiple
seal construction using sili-
cone rubber “0” rings and a
floating, voidless insert con-
struction. The floating insert
design allows the inserts to
move within the connector
housing to control interfacial
sealing pressure in spite of
tolerance accumulation, and
acompression interfacial
seal with minimum engaging
force. Both the primary “0”
ring system and the contin-
uous dielectric construction
withstand the MIL-C-38300A
altitude breathing test. The
sealing system meets the
air leakage requirements of
not more than 1 cubic inch
of air per hour at a 30 P.S.l.
pressure differential. This
redundant sealing method
is indicative of the inherent
reliability built into our
connectors.
MARC 53 Series Connector
power contacts are manu-
factured from high grade
copper alloys, and are
designed to be crimped
with standard M22520
tooling using subminiature
contact locators.
MARC 53 Series Connectors
incorporate hard insulators
in both the plug and recep-
tacle inserts for exceptional
contact stability.Shoulder
entrapment positively
retains the front insertable
MD53 contacts between
the front and rear insulators.
The new RMD53 contacts
are rear insertable and
removable and are retained
within the connector insula-
tors by clips which can be
visually inspected. No inser-
tion or extraction tools are
required for either the MD53
or RMD53 contacts using
nominal size wire.
MARC 53 Series Connectors
are truly field serviceable…
no special tools are required
for maintainability. In addi-
tion, connector subcompo-
nents damaged through
handling or misuse can
be procured separately
generally without the need
to scrap entire connector
units.
Weight reductions as high
as 67% are achieved with-
out loss of performance.
MARC 53 Series Connectors
areavailable in both environ-
mental and hermetic styles.
In addition to the positive
lock plug, a threaded cou-
pling plug is also available.
Partnumbers for configura-
tions offering various finishes
and accessories plus other
design variations to satisfy
special requirements are
also available.
MD53
shoulder entrapped contacts RMD53
rear insertable contacts
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
65
Circular
Connectors
3
MARC 53 Series Connectors (Continued)
Service and Performance
Data I. Electrical —Electrical Ratings
Current Rating Dielectric Working Voltage Contact
Contact (Amperes, Withstanding Sea 110,0001Resistance
Size Max., 81°F [+27°C]) Voltage (RMS) Level Ft. Alt. (Millivolts, Max.)
22AWG 5 1000 750 300 15
16 A WG 20 1000 750 300 20
110,000 ft equals 33,528 m altitude.
Wire Sizes Accommodated
Contact Cond. Dia. Jacket
Size (Stranded)1Size2
22AWG .019-.032 .039-.054
[.483-.813] [.991-1.37]
16 A WG .038-.061 065-.081
[.965-1.55] [1.65-2.05]
1Tolerance of conductor diameters required for a reliable crimp. Smaller sizes
readily accommodated — consult Tyco Electronics.
2Smaller jacketed cable can be accommodated but environmental seal
may be impaired. Smooth extruded jacket should be used for consistent
wire sealing.
Insulation Resistance: 5000 megohms, minimum, at room ambient conditions.
II. Mechanical —Durability: 500 Cycles Mate/Unmate.
Coupling/Uncoupling Forces and Tightening Torques:
Coupling/
Shell Uncoupling Tightening Torque (In-Lbs.)
Size Force Retaining Nut Mounting Nut
(In-Lbs.) Max.
9 18 [80.07 N] 20 [2.26 Nm], Max. 30-45 [3.39 – 5.08 Nm]
12 22 [97.86 N] 20 [2.26 Nm], Max. 40-55 [4.52 – 6.21 Nm]
15 27 [120.10 N] 20 [2.26 Nm], Max. 55-70 [6.21 – 7.91 Nm]
18 32 [142.34 N] 20 [2.26 Nm], Max. 70-85 [7.91 – 9.60 Nm]
Operating Temperature: -67°F to 257°F [-55°C to +125°C]
Connector Mated Length: MD Plug (06) mated to MD Receptacles (00) (01)
(02) (12): 2.031 [51.58], max. RMD Plug (06) mated to RMD Receptacles:
2.217 [56.31], max.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
66
MARC 53 Series Connectors (Continued)
Test Data
MARC 53 Series Connectors exceed the requirements of specification MIL-C-38300A (USAF) as detailed in the applicable
M38300A (USAF) military specification sheets.
MARC 53 Series Connectors meet the following selected test parameters as specified below:
DESCRIPTION
MIL-C-38300 Test Para TEST REQUIREMENTS
Contact Retention MD Contacts shall withstand 15 lbs [66.72 N] axial load and RMD contacts
Para. 4.10.3 10 lbs [44.48 N] axial load without axial displacement in excess of 0.012 [.305]
or damage to contacts or inserts when the axial load is applied to the mating
end of the contacts in unmated plugs and receptacles at a rate of approximately
1lb/sec. [4.45 N].
Contact Resistance The potential drop across normally mated contacts shall not exceed 25 mv
Para. 4.10.8 under room ambient and high temperature service conditions when measured
as specified in MIL-C-26636, Fig. 2, with maximum rated current.
Dielectric Withstanding Voltage, No evidence of dielectric breakdown or flashover when mated and unmated
Altitude and Sea Level plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to
Para. 4.10.10 110,000 feet [33,528 m] and 1000 volts RMS at sea level.
Insulation Resistance, Insulation resistance of mated plugs and receptacles shall be 5000 megohms,
Room and High Temp. minimum, at room temperature and 1000 megohms, minimum, at 257°F
Para. 4.10.13 and 4.10.13.1 [+125°C] when measured per MIL-STD-202, Method 302, Test Condition B.
Coupling and Uncoupling Plugs and receptacles shall withstand up to 500 cycles of engagement and
Para. 4.11.3 separation (locking mechanism actuated with each cycle) without detrimental
damage to plugs or receptacles or not satisfying subsequent tests of MIL-C-38300.
Fluid Immersion Mating and unmating forces shall not exceed 27 Ibs, [120.10 N] maximum,
Para. 4.11.5 (15 shell size) after fully wired plugs and receptacles are immersed for 20 hours,
each, in hydraulic fluid (MIL-H-5606) and high temperaturelubricating oil
(MIL-L-9236) followed by a one-hour dry.
Sweep Vibration, Mated Mated connectors shall show no circuit interruptions greater than one microsec-
Para. 4.11.6 ond during 12 hours vibration to include six sweeps in each axis at extreme
temperatures of -85°F [-65°C] and 257°F [+125°C] per MIL-STD-202, Method
204, Test Condition D. Post inspection shall show no detrimental cracking,
breaking, or loosening of parts.
Moisture Resistance The insulation resistance of mated connectors shall exceed 1000 megohms
Para. 4.11.8 after subjection to moisture resistance testing per MIL-STD-202, Method 106, as
amended by MIL-C-38300.
Altitude Breathing The insulation resistance of wired and mated connectors shall be 5000
Para. 4.11.12 megohms, minimum, and there shall be no flashover or breakdown at a test
voltage of 1000 volts RMS after the third cycle and while immersed in 5% salt
water solution at 68°F [20°C] and room ambient pressure pressure at 68°F
[20°C].
Salt Spray Unmated plugs and receptacles shall show no excessive corrosion which
Para. 4.11.13 would detrimentally affect the electrical and mechanical performance of the
connectors after subjection to 24 hours exposure to salt spray atmosphere per
MlL-STD-202, Method 101.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
67
Circular
Connectors
3
MARC 53 Series Connectors (Continued)
Shell Size 9 Shell Size 12 Shell Size 15 Shell Size 186
Contact Arrangements 1,2
1Views shown are front face view of receptacles. Front face view of plugs is mirror image of that shown.
2In addition to those inserts shown, MARC 43 Series Connector inserts may be utilized in MARC 53 Series Connector
housings. See page 63, MARC 43 Series Connector modifications.
3Arrow ( )indicates insert top or vertical position in relation to top or vertical position of connector housings.
4Arrangement also available in RMD style.
5Arrangement also available in hermetic seal receptacles.
6Arrangement available in 06, 00, 01.
PartNumber and
Ordering Information
MARC 53 Series Connector
part numbers indicate size,
shape, insert layout, type of
seal, style of contact and
polarization.
Note: Pin or socket (power
or coaxial) contacts may be
used in either plugs or
receptacles. However, it is
recommended that pins be
placed in the receptacles
when possible to take
advantage of our “scoop-
proof” design.
Alternate Keying —Standard
alternate polarizing key
positions areshown below.
Additional polarizing key-
ways are available upon
request.
Supplemental Accessory
Hardware —We also manu-
facture supplemental acces-
sory hardware (protective
covers, shield adapters,
etc.) to adapt these connec-
tors to almost any applica-
tion. For modifications to fit
your requirements, contact
Tyco Electronics.
Typical Part Number
MD53 06 E 15 61 S N (***)
Modification
Designator
when applicable
(See page 73)
Polarizing position
N, 1, 2, 3, 4, etc.
P — Pin, Power Pin, Coaxial Pin
S — Socket, Power Socket, Coaxial Socket
NOTE: If P or S does not appear in the
numbering system, no contacts will be
supplied with order (order separately)
Insert arrangement number
Shell Size — O.D. of receptacle
barrel to nearest .063 [1.60]
E — Environmentally sealed
H — Hermetic seal (receptacle only).
Single hole mntng. 00
receptacle
Line cord recept. 01
Box mntng. recpt. 02
Straight plug, 06
positive lock quick
disconnect
Box mntng. recept., thd 12
Straight plug, 16
threaded coupling
Series — MD53
or RMD53 style
Insert Arrangement 39-19 4,5 12-37 4,5 15-31 518-91 4,5
Number of Contacts 19 37 31 91
Contact Size 22 AWG 22 AWG 16 AWG 22 AWG
Shell Size 15 Shell Size 15 Shell Size 15
Shell Size 9
InsertArrangement 39-7 515-61 4,5 15-55 15-43
Number of Contacts 7 61 55 1-95 ohm
Contact Size 16 AWG 22 AWG 22-20 AWG 42-22 AWG
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
68
MARC 53 Series Connectors (Continued)
Polarizing Key Positions
All of our multi-pin plugs
and receptacles are avail-
able in alternate polarizing
positions as listed below:
Shell Size 9
Part No. X° Y°
(R) MD53-***9-***-N 130 110
(R) MD53-***9-***-1 130 150
(R) MD53-***9-***-2 90 110
(R) MD53-***9-***-3 210 110
(R) MD53-***9-***-4 130 35
(R) MD53-***9-***-5 90 230
Shell Size 12
Part No. X° Y°
(R) MD53-***12-***-N 130 110
(R) MD53-***12-***-1 130 90
(R) MD53-***12-***-2 130 145
(R) MD53-***12-***-3 105 110
(R) MD53-***12-***-4 155 110
(R) MD53-***12-***-5 80 110
(R) MD53-***12-***-6 190 110
(R) MD53-***12-***-7 130 170
(R) MD53-***12-***-8 215 110
(R) MD53-***12-***-9 80230
(R) MD53-***12-***-10 130 30
Shell Size 15
Part No. X° Y°
(R) MD53-***15-***-N 130 110
(R) MD53-***15-***-1 130 90
(R) MD53-***15-***-2 130 150
(R) MD53-***15-***-3 130 170
(R) MD53-***15-***-4 190 110
(R) MD53-***15-***-5 150 110
(R) MD53-***15-***-6 90 110
(R) MD53-***15-***-7 70 110
(R) MD53-***15-***-8 70 230
(R) MD53-***15-***-9 90 230
(R) MD53-***15-***-10 210 110
(R) MD53-***15-***-11 30 110
(R) MD53-***15-***-12 250 30
(R) MD53-***15-***-13 130 30
(R) MD53-***15-***-14 30 230
Shell Size 18
PartNo. A° B° C° D° E°
(R) MD53-***18-***-N 60 130 185 250 325
(R) MD53-***18-***-1 70 130 205 270 320
(R) MD53-***18-***-2 55 130 210 250 310
(R) MD53-***18-***-3 50 130 190 235 305
(R) MD53-***18-***-4 75 125 190 250 320
(R) MD53-***18-***-5 80 150 205 250 300
(R) MD53-***18-***-6 50 90 175 250 315
(R) MD53-***18-***-7 70 120 175 250 295
(R) MD53-***18-***-8 70 130 205 260 325
(R) MD53-***18-***-9 35 90 130 215 285
(R) MD53-***18-***-10 75 140 210 250 310
YX
(1)
E
A
B
D
C
(1)
E
A
B
D
C
(1)
YX
(1)
Plug
(Shell sizes 9, 12, 15 only) Receptacle
(Shell sizes 9, 12, 15 only)
Plug
(Shell size 18 only) Receptacle
(Shell size 18 only)
(1) Arrow ( ) indicates top or vertical position (master key/keyway) and coincides with top or vertical position of insert
shown on page 59. This relationship remains constant with alternate polarizing key positions.
(R) Rear insertable and removable.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
69
Circular
Connectors
3
MARC 53 Series Connectors (Continued)
Configurations
MD53-06E/RMD53-06E
Straight Plug, positive lock
Coupling, Environmental
(Mates with Receptacles,
All Types)
B
.093
[2.36]
C
Max.,
RMD only
Master Keyway
A
MD53-16E/RMD53-16E
Straight Plug, Threaded
Coupling, Environmental
(Mates with Receptacles,
Types 00 and 12; Not avail-
able in 18 Shell Size)
B
.093
[2.36]
C
Max.,
RMD only
A
TThread
Lockwire
Holes
Master
Keyway
Shell Dimensions
Size A B (Max.) C (Max.)
9.890 1.000 1.281
22.60 25.4 32.54
12 1.078 1.000 1.281
27.38 25.4 32.54
151.262 1.000 1.281
32.05 25.4 32.54
18 1.577 1.000 1.281
40.06 25.4 32.54
Shell Dimensions
Size A B (Max.) C (Max.) T (Class 2B)
9.812 1.125 1.500 5/8-32UN
20.62 28.57 38.1
12 1.000 1.125 1.500 13/16-28UN
25.4 28.57 38.1
15 1.187 1.125 1.500 1-28UN
30.15 28.57 38.1
18 1.437 1.125 1.437 1-1⁄4-28UN
36.50 28.57 36.50
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
70
MARC 53 Series Connectors (Continued)
MD53-00E/RMD53-00E
Receptacle, Single Hole
Mounting, Environmental
(Mates with Plugs, Type 06
and 16)
C
E
D
F
Hex.
A
Hex.
B
Hex.
Max.,
RMD Only
Master
Key
.065–.085
[1.65–2.16]
.093
[2.36]
TThread
G
.080–.100
[2.03–2.54]
.125
[3.18]
Note: .313 [7.95] Maximum Panel Thickness when mated with a positive lock 06 Plug.
.109 [2.77] Maximum Panel Thickness when mated with threaded 16 Plug.
Panel Cutout
Shell Dimensions
Size A B C D E F G T (Class 2A)
9.75 .687 1.360 .607-.611 .625-.629 .563 .090 5/8-32NS
19.05 17.45 34.54 15.42-15.52 15.87-15.97 14.30 2.29
12 .937 .875 1.360 .794-.798 .812-.816 .75 .090 13/16-28NS
23.80 22.23 34.54 20.17-20.27 20.62-20.73 19.05 2.29
15 1.125 1.062 1.360 .975-.979 .999-1.003 .875 .090 1-28UNS
28.58 26.97 34.54 24.76-24.86 25.37-25.48 22.23 2.29
181.625 1.375 1.360 1.214-1.218 1.251-1.255 1.125 .125 1-1/4-28UN
41.28 34.93 34.54 30.83-30.94 31.77-31.87 28.58 3.18
MD53-01E/RMD53-01E
Receptacle, Line Cord,
Environmental (Mates with
Plug, Type 06)
.093
[2.36] Max.,
RMD only
B
Master
Key
C
Hex.
A
Note: Unless otherwise shown, tolerances are: decimals ± .015 [±.381]; fractions ± 1⁄32.
Shell Dimensions
Size A(Max.) B(Max.) C
91.360 .766 .562
34.54 19.46 14.27
12 1.360 .953 .75
34.54 24.21 19.05
15 1.360 1.141 .875
34.54 28.98 22.23
18 1.360 1.578 1.125
34.54 40.08 28.58
Configurations (Continued)
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
71
Circular
Connectors
3
MARC 53 Series Connectors (Continued)
MD53-02E/RMD53-02E
Receptacle, Box Mounting,
Environmental (Mates with
Plug, Type 06)
.065–.085
[1.65–2.16] .052–.072
[1.32–1.80]
C
Hex.
1.36
[34.54]
B
Typ.
A
Typ.
.110–.130
[2.79–3.30]Dia.
Typ.
Master Polarizing
Key
.093
[2.36]Max.RMD only
D
Shell Dimensions
Size ABCD
9.875 .594 .563 .595
22.23 15.09 14.30 15.11
121.000 .786 .75 .783
25.40 19.96 19.05 19.89
15 1.125 .906 .875 .960
28.58 23.01 22.23 24.38
18 1.344 1.062 1.125 1.212
34.14 26.97 28.58 30.78
MD53-12E/RMD53-12E
Threaded Coupling
Receptacle, Box Mounting,
Environmental (Mates with
Plugs, Type 06 and 16; not
available in 18 Shell Size)
.065–.085
[1.65–2.16] .052–.072
[1.32–1.80]
C
Hex.
1.36
[34.54]
B
Typ.
A
Typ.
.110–.130
[2.79–3.30]Dia.
Typ.
Master Polarizing
Key
.093
[2.36]Max.RMD only
TThread
D
Shell Dimensions
Size A B C T (Class 2A) D
9.875 .594 .563 5/8-32UN .645
22.23 15.09 14.30 16.38
12 1.000 .786 .75 13/16-28UN .832
25.40 19.96 19.05 21.13
15 1.125 .906 .875 1-28UN 1.020
28.58 23.01 22.23 25.91
.375 [9.53] Max. Panel Thickness for
rear-mount applications.
Note: Unless otherwise shown, tolerances are: decimals ± .015 [±.381]; fractions ± 1⁄32.
Configurations (Continued)
Panel Cutout
.125 [3.18] Max. Panel Thickness
when mated with threaded 16 Plug
for rear mount applications.
Panel Cutout
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
72
MARC 53 Series Connectors (Continued)
Accessories
Test Adapter
The test adapter accessory
isutilized primarily as a con-
nector simulator to preserve
the end-use connector
where this connector would
be subjected to extensive
testing, matings, or probings.
The test adapter, when
mated, provides the exact
mating interface as that of
the end-use connector and is
completely field serviceable.
Test Adapter Product
Part Number System
How to Specify
Protective Covers
Shell Receptacle Cover Part No.1Plug Cover Part No.1Dimensions (Max.)
Size With Chain Without Chain With Chain Without Chain A B C D
9 086-0049-00AL 086-0073-00W3 086-0052-00L6 086-0076-00P2 .766 .950 .969 .913
19.46 24.13 24.61 23.19
12 086-0050-00AL 086-0074-00W3 086-0053-00L6 086-0077-00P2 .953 .950 1.156 .913
24.21 24.13 29.36 23.19
15 086-0051-00AL 086-0075-00W3 086-0054-00L6 086-0078-00P2 1.141 .950 1.344 .913
28.98 24.13 34.14 23.19
18 086-0146-00AL 086-0139-00W3 086-0147-00L6 086-0140-00P2 1.578 1.000 1.781 .913
40.08 25.4 45.24 23.19
1For threaded plug (PT) cover, consult Tyco Electronics. Wire rope/lanyard attachments and plastic protective caps also available, consult Tyco Electronics.
B
A
D
C
Receptacle Cover Plug Cover
B
A
Dia.
Shell Dimension
Size A(Max.) B(Max.)
9.906 2.670
23.01 67.82
12 1.094 2.670
27.79 67.82
15 1.281 2.670
32.54 67.82
18 1.594 2.670
40.49 67.82
T 53 E 15 61 SP N (XXX)
Modification Designator
Polarizing Position
Contact Sex
SP — Sockets Plug end, Pins Receptacle end
PS — Pins Plug end, Sockets Receptacle end
Layout
Shell Size
Adapter Type
E — Sealed
A — Unsealed
Series or Style
53 — MARC 53 Series Connector
63 — MARC 63 Series Connector
Test Adapter
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
73
Circular
Connectors
3
MARC 53 Series Connectors (Continued)
Accessories (Continued)
Cable Clamps
Shell Clamp Part No. AB T
Size MD RMD Thd. 2A
9 086-0099-00F5 086-0175-00F3 .704 .750 1/2-20 UNF
17.88 19.05
12 086-0100-00F5 086-0176-00F3 .773 .932 11/16-24 UNEF
19.63 23.67
15 086-0101-00F5 086-0177-00F3 .829 1.078 13/16-24 UNEF
21.06 27.38
18 086-0142-00F5 086-0178-00F3 .890 1.250 1-28 UN
22.61 31.75
Contact Cavity Sealing Plugs (see page 80)
Contact Standard Length Part No. Short Length Part No.
Size MD RMD MD RMD
22 A WG 086-0055-0000 086-0148-0000 082-0009-0000 086-0009-0000
16 A WG 086-0056-0000 —082-0010-0000 —
Note: Standard length plug occupies contact cavity and wire sealing grommet. Short length
plug occupies wire sealing grommet only (to be used behind non-wired contacts and
in plugs which mate to hermetic receptacles).
We offer a unique modifica-
tion identification system
which provides alteration of
standardMARC 53 Series
Connectors to include spe-
cial finishes, accessories,
MARC 43 Series Connector
contact arrangements, and
custom quality assurance
provisions — processing,
testing, serialization,
traceability. Consult
Tyco Electronics for addition-
al modification information.
Standard modifications
include:
(503): MARC 53 Series
Connector including
cable clamp, straight
type
(504): MARC 53 Series
Connector including
cable clamp, right-
angle type
(506): MARC 53 Series
Connector,gold finish
(507): MARC 53 Series
Connector, electro-
less nickel finish
(508): MARC 53 Series
Connector, black
anodized coupling
ring, gold over elec-
troless nickel hous-
ings, retaining nuts
and hardware.
Contacts (see pages 78 and 79)
Contact Pin PartNo. Socket PartNo.
Size MD RMD MD RMD
22 A WG 083-0009-00R4 083-1200-00R4 082-0464-00Y9 082-0462-00Y9
16 AWG 083-0158-00R4 —082-0113-00T1 —
Note: Standard packaging includes same quantity of contacts as contact cavities in insert.
.156
[3.96]
T
A
B
Shell Clamp Part No. T
Size MD RMD AB(Max.) C (Max.) D Thd. 2A
9086-0103-00F5 086-0179-00F3 .737 .600 1.100 .879 1/2-20 UNF
18.72 15.24 27.94 22.32
12 086-0104-00F5 086-0180-00F3 .913 .775 1.250 1.067 11/16-24 UNEF
23.19 19.68 31.75 27.10
15 086-0105-00F5 086-0181-00F3 1.048 .962 1.469 1.233 13/16-20 UNEF
26.62 24.43 37.31 31.32
18 086-0143-00F5 086-0182-00F3 1.225 1.185 1.550 1.550 1-28 UN
31.12 30.01 39.37 39.37
.156
[3.96]
C
TA
B
D
Right-Angle
Straight
Modifications
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
74
MARC 63 Series Connectors
MARC 63 Series Connectors RMD63 Performance Data
MARC 63 Series Connectors,0 RMD63 Series meet or exceed the performance requirements of specification MIL-C-
38300A (USAF) as detailed in the M38300A (USAF) military specification sheets covering the MARC 53 Series
Connectors. Tyco Electronics can supply detailed, cross reference information. MARC 63 Series Connectors, RMD63
Series meet the following selected test parameters as specified below:
DESCRIPTION TEST REQUIREMENTS
Contact Retention Contacts are to withstand 15 lbs. [66.72 N] axial load and RMD contacts 10 lbs.
[44.48 N] axial load without axial displacement in excess of 0.012 [.305] or
damage to contacts or inserts when the axial load is applied to the mating end
of the contacts in unmated plugs and receptacles at a rate of approximately
1lb/sec. [4.45 N].
Contact Resistance The potential drop across normally mated contacts shall not exceed 25 mv
under room ambient and high temperature service conditions when measured
as specified in MIL-C-26636, Fig. 2, with maximum rated current.
Dielectric Withstanding Voltage, No evidence of dielectric breakdown or flashover when mated and unmated
Altitude and Sea Level plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to
110,000 [33,528 m] feet and 1000 volts RMS at sea level.
Insulation Resistance, Insulation resistance of mated plugs and receptacles shall be 5000 megohms,
Room and High Temp. minimum, at room temperature and 1000 megohms, minimum, at 257°F
[+125°C] when measured per MIL-STD-202, Method 302, Test Condition B.
Coupling and Uncoupling Plugs and receptacles shall withstand up to 500 cycles of engagement and
separation without detrimental damage to plugs or receptacles or not satisfying
subsequent tests of MIL-C-38300.
Fluid Immersion Mating and unmating forces shall not exceed 27 lbs. [120.10 N], maximum,
(15 shell size) after fully wired plugs and receptacles are immersed for 20 hours,
each, in hydraulic fluid (MIL-H-5606) and high temperaturelubricating oil
(MIL-L-9236) followed by a one-hour dry.
Sweep Vibration, Mated Mated connectors shall show no circuit interruptions greater than one
microsecond during 12 hours vibration to include six sweeps in each axis at
extreme temperatures of -85°F [-65°C] and 257°F [+125°C] per MIL-STD-202,
Method 204, Test Condition D. Post inspection shall show no detrimental crack-
ing, breaking, or loosening of parts.
MoistureResistance The insulation resistance of mated connectors shall exceed 1000 megohms after
subjection to moisture resistance testing per MIL-STD-202, Method 106, as
amended by MIL-C-38300.
Altitude Breathing The insulation resistance of wired and mated connectors shall be 5000
megohms, minimum, and thereshall be no flashover or breakdown at test voltage
of 1000 volts RMS after the third cycle and while immersed in 5% salt water
solution at 68°F [20°C] and room ambient pressure at 68°F [20°C].
Salt Spray Unmated plugs and receptacles shall show no excessive corrosion which
would detrimentally affect the electrical and mechanical performance of the
connectors after subjection to 24 hours exposureto salt spray atmosphere per
MIL-STD-202, Method 101.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
75
Circular
Connectors
3
MARC 63 Series Connectors (Continued)
Part Number and Ordering
Information
Typical Part Number
Connector part numbers
indicate size, shape, insert
layout, type of seal, style of
contact and polarization.
Note: Pin or socket (power or coaxial)
contacts may be used in either plugs
or receptacles. However, it is recom-
mended that pins be placed in the
receptacle when possible to take
advantage of our “scoop-proof”
design.
(1) For polarizing key positions see MARC 53 Series Connectors.
(2) For contact arrangements see MARC 53 Series Connectors.
Note: If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately).
MD63 06 E 15 61 S N (***)
Modification
Designator
when applicable
(See page 77)
Polarizing position (1)
N, 1, 2, 3, 4, etc. . . .
P — Pin power contact
S — Socket power contact
Insert arrangement number (2)
Shell Size — O.D. of receptacle barrel to nearest 1/16 inch
E — Environmentally sealed
H — Hermetic seal (receptacle only).
Single hole mntng. 00
receptacle
Line cord recept. 01
Box mntng. recpt. 02
Straight plug, bayonet 06
quick disconnect
Series — MD63
or RMD63 style
Configurations
MD63-06E/RMD63-06E
Straight Plug, Bayonet
Coupling, Environmental
and Non-Environmental
(Mates with Receptacles
02, 00 and 01)
A
Master Polarizing
Keyway
B
C
.093
[2.36] Max.
Shell Dimensions
Size A B (Max.) C (Max.)
9.813 1.000 1.288
20.65 25.4 32.72
12 1.000 1.000 1.288
25.40 25.4 32.72
15 1.125 1.000 1.288
28.58 25.4 32.72
18 1.594 1.000 1.288
40.49 25.4 32.72
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
76
MARC 63 Series Connectors (Continued)
Configurations (Continued)
MD63-02E/RMD63-02E
Receptacle, Box Mounting,
Environmental and Non-
Environmental (Mates with
Plug, Type 06)
B
Typ.
A
Typ.
C
Hex.
.093
[2.36]
1.360
[34.54]
.052–.072
[1.32–1.83]
.065–.085
[1.65–2.16]
Max. D
.110–.130
[2.79–3.302] Dia.
4 Holes
Master Polarizing
Key
Shell Dimensions
Size ABC D
9.875 .662 .562 .693-.697
22.23 16.81 14.27 17.60-17.70
12 1.000 .786 .75 .881-.885
25.40 19.96 19.05 22.38-22.48
151.125 .906 .875 1.006-1.011
28.58 23.01 22.23 25.55-25.68
181.344 1.062 1.125 1.250-1.260
34.14 26.97 28.58 30.48-32.00
Panel Cutout
MD63-00E/RMD63-00E
Receptacle, Single Hole
Mounting, Environmental
and Non-Environmental
(Mates with Plug, Type 06)
B
Hex. A
Hex. F
Hex.
C
T
Thread .093
[2.36]
.125
[3.18]
Max.
D
E
Master Polarizing
Key
Panel Cutout
Shell Dimensions
Size A B C D E F T (Class 2A)
9.813 .75 1.360 .669-.673 .693-.697 .562 11/16-32UN
20.65 19.05 34.54 16.99-17.09 17.60-17.70 14.27
12 1.000 .937 1.360 .850-.856 .881-.885 .75 7/8-28UN
25.40 23.80 34.54 21.59-21.74 22.38-22.48 19.05
15 1.125 1.062 1.360 .975-.979 1.006-1.010 .875 1-28UN
28.58 26.97 34.54 24.76-24.87 25.55-25.65 22.23
18 1.625 1.375 1.360 1.212-1.216 1.251-1.255 1.125 1-1/4-28UN
41.28 34.93 34.54 30.78-30.88 31.78-31.88 28.58
MD63-01E/RMD63-01E
Receptacle, Line Cord,
Environmental (Mates with
Plug, Type 06)
B
Master Polarizing Key
C
Hex.
A
.093
[2.36]Max.
Shell Dimensions
Size A B (Max.) C
91.360 .703 .562
34.54 17.86 14.27
12 1.360 .891 .75
34.54 22.63 19.05
15 1.360 1.016 .875
34.54 25.81 22.23
18 1.360 1.203 1.125
34.54 30.56 28.58
.375 [9.53] Max. Panel Thickness
for rear mount applications.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
77
Circular
Connectors
3
MARC 63 Series Connectors (Continued)
Accessories
Cable Clamps
.156
[3.96]
.225
[5.72] Max. A
T
Thread
B
D
C.156
[3.96]
.225
[5.72] Max.
T
Thread
B
A
Shell Size Part No. A B T Thread
9 086-0175-00N1 .704 .750 1/2-20UNF-2A
17.88 19.05
12 086-0176-00N1 .773 .932 11/16-24UNEF-2A
19.63 23.67
15 086-0177-00N1 .829 1.078 13/16-20UNEF-2A
21.06 27.38
18 086-0178-00N1 .890 1.250 1-28UN-2A
22.61 31.75
Shell Size PartNo. A B(Max.) C (Max.) D T Thread
9 086-0179-00N1 .737 .600 1.100 .879 1/2-20UNF-2A
18.72 15.24 27.94 22.32
12 086-0180-00N1 .913 .785 1.250 1.067 11/16-24UNEF-2A
23.19 19.94 31.75 27.10
15 086-0181-00N1 1.048 .962 1.469 1.233 13/16-20UNEF-2A
26.62 24.43 37.31 31.21
18 086-0182-00N1 1.225 1.185 1.550 1.550 1-28UN-2A
31.12 30.10 39.37 39.37
Straight
Angle
Protective Covers
Shell Receptacle Part No. Plug Part No. Dimensions
Size Without Chain With Chain Without Chain With Chain A B C D
9086-0253-00P2 086-0257-00L6 086-0261-00F5 086-0265-00L6 .813 .950 .813 .913
20.65 24.13 20.65 23.19
12 086-0254-00P2 086-0258-00L6 086-0262-00F5 086-0266-00L6 1.000 .950 1.000 .913
25.40 24.13 25.40 23.19
15 086-0255-00P2 086-0259-00L6 086-0263-00F5 086-0267-00L6 1.125 .950 1.125 .913
28.58 24.13 28.58 23.19
18 086-0256-00P2 086-0260-00L6 086-0264-00F5 086-0268-00L6 1.594 .950 1.594 .913
40.49 24.13 40.49 23.19
Plastic Protective Covers also available; consult Tyco Electronics.
A
B
C
D
Modifications
Weoffer a unique modifica-
tion system which provides
alteration of standard
MARC 63 Series Connectors
to include special finishes,
accessories, and custom
quality assurance
provisions — processing,
testing, serialization,
traceability. Consult your
sales representative or
Tyco Electronics for addition-
al modification information.
Standard modifications
include:
(801): MARC 63 Series
Connector,electroless
nickel finish
(803): MARC 63 Series
Connector including
cable clamp, straight
type
(804): MARC 63 Series
Connector including
cable clamp, right-
angle type
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
78
Contacts for MARC 43, MARC 53 and MARC 63 Connectors
MARC 43, MD53, MD63 Series
MARC RMD53, RMD63 Series
Part Number 083-0009-00R4
(6-1532030-1) 22 AWG Pin
.702
[17.83]
.452
[11.48]
Wire Inspection Hole
.060–.064
[1.52–1.63] Dia..030–.032
[0.76–0.81] Dia.
Part Number 083-1200-00R4
(4-1532036-8) 22 AWG Pin
.767
[19.48]
.515
[13.08]
Wire Inspection Hole
.055–.058
[1.40–1.47]Dia..030–.032
[0.76–.0.81] Dia.
Part Number 082-0461-00Y9
(5-1532030-6) 22 AWG Socket
.505–.525
[12.83–13.33]
Wire Inspection Hole
.051–.055
[1.30–1.40]Dia..055–.058
[1.40–1.47]Dia.
MARC 43, MD53, MD63 Series
Part Number 083-0158-00R4
(8-1532030-1) 16 AWG Pin
.702
[17.83]
.452
[11.48]
Wire Inspection Hole
.086–.090
[2.18–2.29]Dia..061–.063
[1.55–1.60]Dia.
Part Number 082-0113-00T1
(3-1532030-3) 16 AWG Socket
.445–.460
[11.30–11.68]
Wire Inspection Hole
.086–.092
[2.18–2.34]Dia.
MARC 43 Series
Part Number 083-0173-00R4
12 AWG Pin
.702
[17.83]
.452
[11.48]
Wire Inspection Hole
.139–.143
[3.53–3.63] Dia..093–.096
[2.36–2.44] Dia.
.121–.126
[3.07–3.20] Dia.
MARC MD53, MD63 Series
Part Number 083-1435-00R4
(7-1532037-3) 22-20 AWG Pin
.702
[17.83]
.452
[11.48]
Wire Inspection Hole
.068–.072
[1.73–1.83] Dia.
.030–.032
[0.76–0.81] Dia.
.049–.053
[1.24–1.35] Dia.
Part Number 082-0132-00T1
(3-1532030-4) 12 AWG Socket
.445–.460
[11.30–11.68]
Wire Inspection Hole
.121–.126
[3.07–3.20] Dia.
.139–.143
[3.53–3.63] Dia.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
79
Circular
Connectors
3
Contacts for MARC 43, MARC 53 and MARC 63 Connectors (Continued)
MARC 43, MD53, MD63 Series
Part Number 082-0464-00Y9
(5-1532030-7) 22 AWG Socket
.451–.462
[11.46–11.73]
Wire Inspection Hole
.060–.064
[1.52–1.63] Dia..051–.055
[1.30–1.40]Dia.
MARC 43, MD53, MD63 Series
Solder Type Coaxial
Contacts
B
A
MARC MD53, MD63 Series
Part Number 082-0466-00Y9
22-20 AWG Socket
.451–.462
[11.46–11.73]
Wire Inspection Hole
.068–.072
[1.73–1.83] Dia..051–.055
[1.30–1.40]Dia.
CP Type
B
A
CS Type
MARC 43 Series
LEPRA/CON Crimp Type,
50 Ohm Coaxial Contacts
Part Number 142-1500-0001
CS Socket
.425
[10.80]
.120
[3.05]
Crimp Approx.
Part Number 141-1500-0001
CP Pin
.600
[15.24]
.210–.240
[5.33–6.10]
Crimp Length
Contact Part No. Type A Dia. B
084-0027-00T2 CS .109 .452
50 Ω(5-1532129-8) 2.77 11.48
084-0024-00T2 CP .093 .600
(5-1532129-7) 2.36 15.24
084-0028-00T2 CS .123 .452
75 Ω(5-1532129-9) 3.12 11.48
084-0025-00T2 CP .106 .600
(7-1532155-0) 2.69 15.24
084-0029-00T2 CS .168 .452
95 Ω(5-1532168-1) 4.27 11.48
084-0026-00T2 CP .149 .600
3.78 15.24
Coaxial Contacts
Size Part No. Application Description
086-0001-0000 Unsealed 43 Series
Sealed 43 Series
22 A WG 086-0009-0000 MD53, RMD53
MD63, RMD63
086-0148-0000 RMD53, RMD63
086-0056-0000 Sealed 43 Series
MD53, MD63
16AWG 086-0010-0000 Sealed 43 Series
MD53, MD63
086-0014-0000 Unsealed 43 Series
086-0057-0000 Sealed 43 Series
12 AWG
086-0015-0000 Unsealed 43 Series
22/20 A WG 086-0251-0000 MD53, MD63
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
80
Contact Cavity Sealing Plugs
.447
[11.35]
.047–.055
[1.19–1.40] Dia. .057–.065
[1.45–1.65] Dia.
.940
[23.88] .046–.054
[1.17–1.37] Dia.
.940
[23.88]
.075–.083
[1.91–2.11] Dia.
.452
[11.48] .086–.094
[2.18–2.39]Dia.
.940
[23.88] .125–.133
[3.18–3.38]Dia.
.140–.148
[3.56–3.76] Dia.
.940
[23.88]
.069–.073
[1.75–1.85]
.052–.055
[1.32–1.40]
.049–.053
[1.24–1.35]Dia.
Dia.
Dia.
.421
[10.70] .075–.083
[1.91–2.11] Dia.
.447
[11.35] .140–.148
[3.56–3.76]
.121–.129
[3.07–3.28] Dia.
Dia.
.421
[10.70] .045–.053
[1.14–1.35] Dia.
Size Part No. Application A Dia. B Dia. Description
5052 086-0061-0000 .112-.120 —
2.84-3.05
7552 086-0062-0000 Unsealed 43 Series .135-.143 —
3.43-3.63
9552 086-0063-0000 .178-.186 —
4.52-4.72
5052 086-0058-0000 .081-.089 .112-.120
2.06-2.26 2.84-3.05
7552 086-0059-0000 Sealed 43 Series .106-.114 .135-.143
2.69-2.90 3.43-3.63
9552 086-0060-0000 .151-.159 .178-.186
3.84-4.04 4.52-4.72
.388
[9.86]
A
Dia.
.913
[23.19]
A
Dia.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
81
Circular
Connectors
3
Assembly Tools
MARC 43, 53 and 63 Series
Connectors
Removal Tool —None required.
Crimp Tools —Turret style tool
(M22520/1-01 and TH88) MICRODOT
Part Number 010-0080-0000 — Crimps
all power contacts.
Locator Style Tool —MICRODOT
Part Number 010-0070-0000 with
locators.
Contact Size Wire Size Locator
22 22, 24 010-0072-0000
22 26 010-0087-0000
16 16, 18 010-0075-0000
For MARC 43 Series Connector Crimp Coax Contacts
Use 010-0132-0000 & 010-0169-0000.
MARC 73 Series Connectors
Description Part No.
Crimp Tool w/ Locator 010-3008-0000
Crimp Tool Only 010-3009-0000
M22520/2-01
Locator Only 010-3010-0000
Description Part No.
Crimp Tool w/ Locator 010-3002-0000
Crimp Tool Only 010-0190-0000
Locator Only 010-3007-0000
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
82
MARC 73 Series Connectors
Service and Performance Data
MARC 73 Series Connectors meet or exceed the performance requirements of specification MIL-C-38999. Your sales rep-
resentative or field engineer can supply detailed, cross-reference information. MARC 73 Series Connectors meet the fol-
lowing selected test parameters as specified below:
DESCRIPTION TEST REQUIREMENTS
Contact Retention Contacts are to withstand 10 lbs [44.48 N] axial load without axial displacement
in excess of 0.012 [0.30] or damage to contacts or inserts when the axial load is
applied to the mating end of the contacts in unmated plugs and receptacles at a
rate of approximately 1 lb/sec. [4.45 N].
Contact Resistance The potential drop across normally mated contacts shall not exceed 25 mv
under room ambient and high temperature service conditions when measured
as specified in MIL C-39029 with maximum rated current.
Dielectric Withstanding No evidence of dielectric breakdown or flashover when mated and unmated
Voltage, Altitude and Sea Level plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to
70,000 feet [21,336 m] and 1000 volts RMS at sea level.
Insulation Resistance, Insulation resistance of mated plugs and receptacles shall be 5000 megohms,
Room and High Temp. minimum, at room temperature and 1000 megohms, minimum, at 257°F
[+125°C] when measured per MIL-STD 202, Method 302, Test Condition B.
Coupling and Uncoupling Plugs and receptacles shall withstand up to 500 cycles of engagement and
separation without detrimental damage to plugs or receptacles or not satisfying
subsequent tests.
Fluid Immersion Mating and unmating forces shall not exceed 27 Ibs [120.10 N] maximum,
(15 shell size) after fully wired plugs and receptacles are immersed for 20 hours,
each, in hydraulic fluid (MIL-H-5606) and high temperature lubricating oil
(MIL-L-9236) followed by a one-hour dry.
Sweep Vibration, Mated Mated connectors shall show no circuit interruptions greater than one microsec-
ond during 12 hours vibration to include six sweeps in each axis at extreme tem-
peratures of -85°F [-65°C] and 257°F [+125°C] per MIL-STD-202, Method 204,
Test Condition D. Post inspection shall show no detrimental cracking, breaking,
or loosening of parts.
MoistureResistance The insulation resistance of mated connectors shall exceed 1000 megohms after
subjection to moisture resistance testing per MIL-STD-202, Method 106.
Altitude Breathing The insulation resistance of wired and mated connectors shall be 5000
megohms, minimum, and thereshall be no flashover or br eakdown at test voltage
of 1000 volts RMS after the third cycle and while immersed in 5% salt water
solution at 68°F [20°C] and room ambient pressure at 68°F [20°C].
Salt Spray Unmated plugs and receptacles shall show no excessive corrosion which
would detrimentally affect the electrical and mechanical performance of the
connectors after subjection to 24 hours exposure to salt spray atmosphere per
MIL-STD-202, Method 101.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
83
Circular
Connectors
3
MARC 73 Series Connectors (Continued)
Service and Performance Data
I. Electrical — Electrical Ratings
Current Rating Dielectric Working Voltage Contact
Contact (Amperes, Withstanding Resistance
Size Max., 81°F [+27°C]) Voltage (RMS) Sea Level 110,000 Ft. Alt.1(Millivolts, Max.)
22AWG 5 1000 750 300 8
1110,000 ft = 33,528 m
II. Mechanical —Durability: 500 Cycles Mate/Unmate.
Coupling/Uncoupling Forces and Tightening Torques:
Coupling/
Shell Uncoupling Tightening Torque (In-Lbs.)
Size Force Retaining Nut Mounting Nut
(In-Lbs.) Max.
9 10 [44.48] 20 [2.26 N] Max. 30-45 [3.39 Nm – 5.08 Nm]
12 15 [66.72] 20 [2.26 N] Max. 40-55 [4.52 Nm – 6.21 Nm]
15 22 [97.86] 20 [2.26 N] Max. 55-70 [6.21 Nm – 7.91 Nm]
18 28 [124.55] 20 [2.26 N] Max. 70-85 [7.91 Nm – 9.60 Nm]
Operating Temperature: -67°F to 257°F [-55°C to +125°C].
Connector Mated Length: 2.217 [56.31] Max.
PartNumber and
Ordering Information MARC 73 Series Connector
part numbers indicate size,
shape, insert layout, type of
seal, style of contact and
polarization.
MD73 06 E 15 91 P N (***)
Modification
Designator
when applicable
Polarizing position
N, 1, 2, 3, 4, etc. . . .
P — Pin power contact
S — Socket power contact
Insert arrangement number
Shell Size — O.D. of receptacle barrel to nearest .062 [19.05] inch
E — Environmentally sealed
Single hole mntng. 00
receptacle
Line cord receptacle 01
Box mntng. receptacle 02
Straight plug, bayonet 06
quick disconnect
Series — MD73
Notes: Pin contacts in plug; socket contacts in receptacle.
If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately).
Contact Arrangements1
Insert Arrangement 29-27312-61315-913
Number of Contacts 27 61 91
Contact Size 22 AWG 22 AWG 22 AWG
1Views shown are front face views of receptacles. Front face view of plug is mirror image of that shown.
2Arrow ( )indicates insert top or vertical position in relation to top or vertical position of housing.
3The 22 AWG contact arrangements will accommodate MIL-W-16878 Type ET, 22, 24, 26 AWG wire. Contact spacing
is on 0.065 [1.65] centers.
Shell Size 9 Shell Size 12 Shell Size 15
Wire Range Accommodations
Wire Wire O.D. of Finished Wire Wire Spec.
Barrel Size
Size (AWG) Range Nominal MIL-W-16878
26.029 Min. .031 Nom. Type “E” or “ET”
0.74 0.79
22AWG 24 — .036 Nom. Type “ET”
0.91
22 .044 Max. .042 Nom. Type “ET”
1.12 1.07
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
84
MARC 73 Series Connectors (Continued)
Configurations
MD73-06E
Straight Plug, Bayonet
Coupling, Environmental
and Non-Environmental
(Mates with Receptacles
02, 00 and 01)
A
Master Polarizing
Keyway
B
C
.093
[2.36]Max.
Shell Dimensions
Size A B (Max.) C (Max.)
9.813 1.000 1.288
20.65 25.40 32.72
121.000 1.000 1.288
25.40 25.40 32.72
151.125 1.000 1.288
28.58 25.40 32.72
18 1.594 1.000 1.288
40.49 25.40 32.72
MD73-02E
Receptacle, Box Mounting,
Environmental and Non-
Environmental (Mates with
Plug, Type 06)
.052–.072
[1.32–1.83] .065–.085
[1.65–2.16]
.093
[2.36]
.110–.130
[2.79–3.30]
4 Holes
B
Typ.
A
Typ.
Dia.
Master Polarizing
Key
C
Hex.
1.360
[34.54]
Max.D
Shell Dimensions
Size ABCD
9.875 .662 .562 .693-.697
22.23 16.81 14.27 17.60-17.70
12 1.000 .786 .75 .881-.885
25.40 19.96 19.05 22.38-22.48
15 1.125 .906 .875 1.006-1.011
28.58 23.01 22.23 25.55-25.68
18 1.344 1.062 1.125 1.250-1.260
34.14 26.97 28.58 31.75-32.00
MD73-00E
Receptacle, Single Hole
Mounting, Environmental
and Non-Environmental
(Mates with Plug, Type 06)
.093
[2.36]
B
Hex. A
Hex.
Master Polarizing
Key
C
T
Thread
F
Hex.
Max.
D
E
.125
[3.18]
Shell Dimensions
Size A B C D E F T (Class 2A)
9.813 .75 1.360 .669-.673 .693-.697 .562 11/16-32UN
20.65 19.05 34.54 16.99-17.09 17.60-17.70 14.27
12 1.000 .937 1.360 .850-.856 .881-.885 .75 7/8-28UN
25.40 23.80 34.54 21.59-21.74 22.38-22.48 19.05
15 1.125 1.062 1.360 .975-.979 1.006-1.010 .875 1-28UN
28.58 26.97 34.54 24.77-24.87 25.55-25.65 22.23
18 1.625 1.375 1.360 1.212-1.216 1.251-1.255 1.125 1-1/4-28UN
41.28 34.93 34.54 30.78-30.89 31.78-31.88 28.58
Panel Cutout
Panel Cutout
.375 [9.53] Max. Panel Thickness
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
85
Circular
Connectors
3
MARC 73 Series Connectors (Continued)
Configurations (Continued)
MD73-01E
Receptacle, Line Cord,
Environmental (Mates with
Plug, Type 06)
BC
Hex.
.093
[2.36]
AMax.
Master Polarizing
Key
Shell Dimensions
Size A B (Max.) C
91.360 .703 .562
34.54 17.86 14.27
121.360 .891 .75
34.54 20.57 19.05
15 1.360 1.016 .875
34.54 25.81 22.23
18 1.360 1.203 1.125
34.54 30.56 28.58
Accessories
Cable Clamps
.156
[3.96]
.225
[5.72]
B
A
Max.
TThread
Shell Size Clamp PartNo. A B T Thd. 2A
9 086-0341-00N1 .704 .750 1/2-20 UNF
17.88 19.05
12 086-0342-00N1 .773 .932 11/16-24 UNEF
19.63 23.67
15 086-0343-00N1 .829 1.078 13/16-20 UNEF
21.06 27.38
18 086-0344-00N1 .890 1.250 1-28 UN
22.61 31.75
.225
[5.72]
.156
[3.96]
D
TThread
C
Max. B
A
Shell Size Clamp Part No. A B (Max.) C (Max.) D T Thd. 2A
9 086-0337-00N1 .737 .600 1.100 .879 1/2-20 UNF
18.72 15.24 27.94 22.33
12 086-0338-00N1 .913 .785 1.250 1.067 11/16-24 UNEF
23.19 19.94 31.75 27.10
15 086-0339-00N1 1.048 .962 1.469 1.233 13/16-20 UNEF
26.62 24.43 37.31 31.32
18 086-0340-00N1 1.225 1.185 1.550 1.550 1-28 UN
31.12 30.10 39.37 39.37
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
86
MARC 73 Series Connectors (Continued)
Accessories (Continued)
Contacts
Twist pin — 22 Pins and
Sockets
Copper alloy plated .000050 [0.00127]
gold over copper flash per MIL-G-45204,
Type II
Rating —5amps
Contact Resistance —.008 ohms
max.
Engineering/Separation Forces —
6oz. [1.67 N] max. / .502 [.139 N] min.
Durability —2000 cycles
Contact Cavity Sealing Plugs
.250
[6.35]
.415
[10.54]
.035
[0.89]
.034
[0.86] .050
[1.27]Dia.
Dia. Dia.
.680
[17.27] .250
[6.35]
.042
[1.07] .030
[0.76]
.050
[1.27] Dia.
Dia.
.030–.032
[0.76–0.81] Dia.
Dia.
.800
[20.32]
.035–.041
[0.89–1.04]
.264
[6.71]
.437
[11.10]
.264
[6.70] .036–.044
[0.91–1.10]
Contact Size Sealing Plug Filler Plug
22 AWG 086-0331-0000 086-0330-0000
Note: Sealing plug occupies insert and grommet cavities.
Filler plug occupies insert cavity only.
Part Number 096-0526-0000
Part Number 086-0331-0000 Part Number 086-0330-0000
Part Number 096-0626-0001
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
87
Circular
Connectors
3
MQR Series — Microminiature Circular Connectors
MQR stands for MICRODOT
Quick Release. This line of
circular quick disconnect
connectors has metal shells
with push-pull couplings
which provide a positive
connection for rugged
environmental use. The
MQR series is specified for
cable-to-cable and cable-
to-panel applications.
The plug connector side
contains socket contacts.
The receptacle connector
side contains pin contacts.
Because the pin contact is
“active” or “live”, the pins
require the physical protec-
tion that the receptacle side
offers. (Similar to a “protect-
ed” or “shrouded” header.)
While there is no optional
hardware for the MQR
series, the receptacles
incorporate a standard jam
nut to tighten the connector
down to the board or panel.
MQR connectors are
manufactured to the per-
formance specifications of
MIL-DTL-83513.
How to Specify/
Ordering Code
MQR A 37 P 6 A 1 18.0
Length in Inches (Min.)
X — Special, Does not fit description.
Insulation Color or Finish
1 — All white 6 — Bare (unfinished)
2— All yellow 7 — Color coded per MIL-STD-681, System I
3 — All gray 9 — 10 Solid color repeating (starts with black)
4 — Gold plated
5 — Tin dipped gold plated
Wire Type
A — Type E, 7 strand
B — Type ET, 7 strand
C — Type E, 19 strand
D — Type ET, 19 strand
F — 7 strand per MIL-W-22759/11
(28 AWG only)
G — 19 strand per MIL-C-22759/11
26 AWG, 24 AWG
L — Copper, solid
Q — Stranded per MIL-W-22759/33
Wire Size
4 — 24 AWG 5 — 25 AWG 6 — 26 AWG 8 — 28 AWG 0 — 30 AWG
Per MIL-W-16878
{
Connector Series
Shell, Material &Finish
A — Aluminum, Electroless Nickel Finish
B — Brass, Sulfamate Nickel Finish
Number of Contacts**
7, 19, 37*
Shell
P — Plug (Socket Contact)
F—Receptacle, Front Panel Mount
(Pin Contact)
R—Receptacle, Rear Panel Mount
(Pin Contact)
S— Solder pot
*uses twist pin contacts
** Other non-standard sizes are also available,
contact Tyco Electronics for details.
Front Panel Mount (MQR Receptacle)
Dimensions
Size A(Hex) B(Min.) Ø C (Min.) D Thd.
7.500 .361 .376 3/8-32 UNEF-2A
12.7 9.17 9.55
19 .625 .477 .501 1/2-28 UNEF-2A
15.88 12.16 12.73
37 .812 .722 .751 3/4-20 UNEF-2A
20.62 18.39 19.07
A
Hex.
.400
[10.16] B
Min.
Ø C
Min.
Key
DThd.
Mounting Hole
For Front Panel Mount
Front Panel Mount (19 Position Shown)
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
88
MQR Series — Microminiature Circular Connectors (Continued)
.795
[20.19]
L
Min.
Ø A Ø B
.0433
[1.10] Typ.
.050
[1.27]Typ.
Keyway
.025
[0.64]Typ.
.130–.144
[3.30–3.66] Typ.
7 Position
1
7
6
5
2
3
4
19 Position
2
31
17
18
4
13
7
16 19
12 8
37 Position
22
15 94
283337
16
10
5
1
23
29
34
3536
23
Circular MQR Series Quick Release Plug
7 Position
(Stamped Pin)
1
2
3
4
7
6
5
19 Position
(Stamped Pin)
2
13
19
18
7
16
4
1317
812
37 Position
(Twist Pin)
16
10 51
232934
22
15
9
4
28
33
37
3635
32
Circular MQR Series Quick Release Receptacle
A
Hex.
.250
[6.35]
L
Min.
.0433
[1.10] Typ.
.050
[1.27]Typ.
.025
[0.64]Typ.
.036
±.005
[0.91±
0.13
]Typ.
B
Min.
ØC
Min.
Key
DThd.
Mounting Hole
For Rear Panel Mount
Rear Panel Mount (19 Position Shown)
Rear Panel Mount (MQR Receptacle)
Dimensions
Size A(Hex) B (Min.) Ø C (Min.) D Thd.
7.500 .422 .440 7/16-28 UNEF-2A
12.7 10.72 11.18
19.687 .531 .564 9/16-24 UNEF-2A
17.45 13.49 14.33
37 .812 .722 .751 3/4-20 UNEF-2A
20.62 18.39 19.07
Plug (19 Position Shown)
MQR Plug
Dimensions
Size Ø A Ø B
7.375 .300
9.53 7.62
19 .475 .400
12.07 10.16
37 .750 .630
19.05 16.00
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
89
Circular
Connectors
3
MTC Series — Microminiature Circular Connectors
How to Specify/
Ordering Code
MTC 19 P 6 A 1 18.0
Length in Inches (Min.)
X— Special, Does not fit description.
Insulation Color or Finish
1 — All white 6 — Bare (unfinished)
2 — All yellow 7 — Color coded per MIL-STS-681, System I
3— All gray 9 — 10 Solid color repeating (starts with black)
4 — Gold plated
5 — Tin dipped gold plated
Wire Size
4 — 24 AWG 5 — 25 AWG 6 — 26 AWG 8 — 28 AWG 0 — 30 AWG
MICRODOT Threaded Coupling Series
Number of Contacts
9, 19
Contact Type
P — Twist Pin (Plug)
S — Socket (Receptacle)
Wire Type
A — Type E, 7 strand G — 19 strand per MIL-C-22759/11
B — Type ET, 7 strand (26 AWG and 24 AWG only)
C — Type E, 19 strand L — Copper, solid
D — Type ET, 19 strand Q — Stranded per MIL-W-22759/33
F — 7 strand per MIL-W-22759/11
(28 AWG only)
Per MIL-W-16878
{
Material and Finish
Shell — Aluminum, nickel plated
Contact — Copper alloy, gold plated
Insulator — RYTON
MTC Series Plug
Dimensions
Size Ø A Ø B C Thd.
9.227 .456 M10 x 0.75
5.77 11.58 19.05
19 .308 .545 M12 x 1
7.82 13.84 25.40
.800
[20.32]
L
Min.
.036
±.005
[0.91
±0.13
]Typ. Ø A
Key
CThd.
Ø B
9 Position
12
3
4
56
7
8
9
19 Position
2
31
17
18
4
13
7
16 19
12 8
MTC Series Plug (19 Position Shown)
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
90
MTC Series — Microminiature Circular Connectors (Continued)
.130–.144
[3.30–3.66]
L
Min.
.900
[22.86]
Ø A
Keyway
CThd.
Typ.
B
Hex.
9 Position
19
8
7
65
4
3
2
19 Position
2
13
19
18
7
16
4
13 17
812
D
Ø E
MTC Series Receptacle (19 Position Shown)
Panel Cut Out
MTC Series Receptacle
Dimensions
Size ØA B Hex. C Thd. D Min. Ø E Min.
9.562 .500 M10 x 0.75 .370 .394
14.27 12.70 19.05 9.40 10.01
19.625 .625 M12 x 1 .445 .474
15.88 15.88 25.40 11.30 12.04
Coaxial Connectors
91
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Introduction
MICRODOT Standard
Coaxial Connectors are
designed to accept 50, 70,
and 93 Ohm miniature
coaxial cables. These con-
nectors areavailable as
Screw-On Series, Slide-On
Series, or Quick-Connect
Series. The Screw-On
Series is intermateable with
the Gold Plated Crimp Style
Coaxial Connector Series
and offers the dependability
of a threaded coupling. For
enhanced safety,choose
connectors with wireholes.
Choose Slide-On Series for
the fastest, most convenient
mating and unmating.
The Quick-Connect Series
offers the convenience of
Slide-On coupling with
added retention provided
by a snap ring located on
the jack/receptacle side.
Consult Tyco Electronics
for special cable accommo-
dations and mounting
features.
Product Facts
nDesigned to accept 50,
70 and 93 ohm miniature
coaxial cables
nThree types of connectors:
Screw-on Series, Slide-on
Series and Quick-Connect
Series
nTemperature range —
-85°F to +257°F [-65°C to
+125°C] (with neoprene
gasket or bend relief cap)
-80°F to 392°F [-62°C to
+200°C] (with silicone gas-
ket or bend relief cap)
nDielectric Withstanding
Voltage — 1000 volts RMS
at sea level
nContact Resistance —
3milliohms max., D.C.
nCaptive Contacts —
Terminated connector
contacts captivated from
movement in both directions
Coaxial Connectors
92 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Mechanical
Captive Contacts —Terminated con-
nector contacts captivated from move-
ment in both directions.
Cable Retention —
50 Ohm connectors, 15 lb. min.1
70 Ohm connectors, 25 lb. min.1
93 Ohm connectors, 35 lb. min.1
Recommended Coupling Torque
(Threaded Interface) —
8inch/pounds max.
Recommended Receptacle
Mounting Torque (All Series) —
8inch/pounds max.
Unmating Force (Slide-On Series)—
1-7 pounds.
Contact Protection (Unmated) —
Pin contact protected by coupling nut
(threaded series)2or by housing (Quick-
Connect and Slide-On Series). Socket
protected by insulator and housing.
Assembly Methods
Straight Plugs & Jacks —Cable
Inner Conductor: Soldered to contact.
Cable Shield: Crimped to jerk ring (sol-
der optional).
Angle Plugs —Cable Inner Conductor:
Soldered to contact. Cable Shield:
Soldered to ring & housing.
Environmental
Temperature Range (Continuous
Service) —-85°F to +257°F [-65°C to
+125°C] (with Neoprene gasket or bend
relief cap). -80°F to 392°F [-62°C to
+200°C] (with Silicone gasket or bend
relief cap).
Vibration3,4 —MIL-STD-202, Method
204, Test condition B (15 G peak). No
physical damage or electrical disconti-
nuities in excess of 1 microsecond.
Shock3,4 —MIL-STD-202, Method
213, Test Condition H. No physical dam-
age or electrical discontinuity after
shock.
Thermal Shock —MIL-STD-202,
Method 107, Test Condition B.
Moisture Resistance3—MIL-STD-
202, Method 106.
Salt Spray3—MIL-STD-202, Method
101, Test Condition B (48 hours).
Electrical
Impedance —Designed to be com-
patible with 50, 70, or 93 Ohm miniature
coaxial cable.
Dielectric Withstanding Voltage —
1000 volts RMS at sea level.
Contact Resistance — 3 milliohms
max., D.C.
Current Capacity — 3 amps, D.C.
Insulation Resistance —5x103
Megohms min. @ 500 volts D.C.
Voltage Standing Wave Ratio5
(VSWR) —Typical 50 Ohm series, 1.2
max. to 2 GHz.
Materials
Housing, Nut, Jerk Ring —Brass
per ASTM-B-16.
Insulator —TEFLON per
ASTM-D-1710.
Pin Contact (Plugs) —Brass per
ASTM-B-16.
Socket Contact (Jacks &
Receptacles) —Beryllium Copper
per ASTM-B-196.
Bend Relief Caps (Plugs & Jacks) —
Neoprene or Silicone Rubber per
ZZ-R-765.
Gaskets (Jacks & Receptacles) —
Neoprene or Silicone Rubber per
ZZ-R-765.
Lockwasher —#425 Bronze Alloy.
Plating
Contacts —Gold per MIL-G-45204,
Type II, Grade C, Class 1.
Housing, Nut, Jerk Ring,
Lockwasher —Silver per QQ-S-365,
Type II, Grade A, .0002 [.005] min.
Notes:
1Termination to cables with foamed
dielectrics excluded. Straight con-
nector jerk rings must be soldered
to cable shield.
2Pin protector required. See individ-
ual connector specifications.
3Screw-On Series, threaded inter-
face.
4Tyco Electronics recommends the
use of safety wired connectors in
vibration and shock environment.
See individual specifications for
connectors with safety wire holes.
5VSWR is a system specification.
Where performance is critical,
purchase Tyco Electronics cable
assemblies with Screw-On or
Quick-Connect Series connectors
and specify VSWR testing and
mating connector part number.
Performance Data
Summary
For Standard Connectors
Standard Connectors
Coaxial Connectors
93
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Standard Connectors — Screw-On Series
See page 128 for mating options.
Plug
S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series
032-0021-0001 032-0010-0001 032-0011-0001
032-0023-0001 032-0022-0001 032-0017-0001
032-0025-0001 032-0067-0001 032-0066-0001
032-0033-0001 032-0078-0001 032-0071-0001
032-0097-0001 032-0222-0001 032-0092-0001
032-0098-0001 052-0092-0001 032-0099-0001
032-0155-0001 052-0200-0001
032-0156-0001
052-0213-0001
052-0235-0001
052-0235-0003
052-0370-0001
052-0542-0001
Right-Angle Plug
S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series
032-0015-0001 032-0013-0001 032-0014-0001
052-0204-0001 052-0299-0001 032-0068-0001
052-0215-0001 052-0379-0001 032-0153-0001
052-0337-0001 052-0207-0001
052-0298-0001
052-0304-0022
Jack
S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series
031-0034-0001 031-0036-0001 031-0037-0001
051-0467-0001 031-0090-0001 031-0088-0001
Bulkhead Jack
S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series
031-0033-0001 031-0048-0001 031-0032-0001
031-0089-0001
Receptacle
S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series
031-0050-0001 031-0051-0001 031-0052-0001
051-0318-0001
Printed Circuit Receptacle
S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series
031-0059-0001 031-0069-0001 031-0067-0001
031-0062-0001 031-0080-0001
051-0450-0001
Right-Angle Printed Circuit Receptacle
S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series
031-0061-0001 031-0072-0001 031-0073-0001
051-0459-0001
Receptacle
S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series
031-0001-0001 031-0017-0001 031-0016-0001
031-0001-0003 031-0018-0001 031-0019-0001
031-0002-0001 031-0046-0001
031-0003-0001
031-0024-0001
051-0125-0001
Coaxial Connectors
94 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Plugs
S-50, 70 & 93
Dim. Dim. Cable Jacket Instruction Former Assembly
Part No. A B Max. Special Features Sheet No. MICRODOT Tool
I.S. No.
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2B Thread
032-0021-0001 .745 .230 Dia. .087 1Solderless Assembly 408-08521 RF-ASMB-88 010-0003-0000
18.92 5.84 2.21
032-0023-0001 .745 .230 Dia. .087 1408-08522 RF-ASMB-89 010-0003-0000
18.92 5.84 2.21
032-0025-0001 .745 .230 Dia. .093 1Solderless Assembly 408-08521 RF-ASMB-88 010-0003-0000
18.92 5.84 2.36
032-0033-0001 .745 .230 Dia. .093 1408-08522 RF-ASMB-89 010-0003-0000
18.92 5.84 2.36
032-0097-0001 .745 .250 Hex. .087 1Solderless Assembly, Hex Nut 408-08521 RF-ASMB-88 010-0003-0000
18.92 6.35 2.21
032-0098-0001 .745 .250 Hex. .087 Hex Nut 408-08522 RF-ASMB-89 010-0003-0000
18.92 6.35 2.21
032-0155-0001 .700 .250 Hex. .088 1, 2Hex Nut, .187 [4.75] 408-08522 RF-ASMB-89 010-0003-0000
17.78 6.35 2.24 Hex Cable Clamp Nut
032-0156-0001 .700 .250 Dia. .088 1, 2.187 [4.75] 408-08522 RF-ASMB-89 010-0003-0000
17.78 6.35 2.24 Hex Cable Clamp Nut
052-0213-0001 .745 .250 Hex. .087 1Solderless, Hex Nut w/ Safety 408-08521 RF-ASMB-88 010-0003-0000
18.92 6.35 2.21 Wire Holes, .021 [0.53] Wire Max.
052-0235-0001 .745 .250 Hex. .087 1, 2Hex Nut 408-08522 RF-ASMB-89 010-0003-0000
18.92 6.35 2.21
052-0235-0003 .745 .250 Hex. .087 1, 2Hex Nut w/ Safety Wire Holes, 408-08522 RF-ASMB-89 010-0003-0000
18.92 6.35 2.21 .021 [0.53] Wire Max.
052-0370-0001 .745 .250 Hex. .093 1Hex Nut, Designed for 408-08522 RF-ASMB-89 010-0003-0000
18.92 6.35 2.36 Dual Shield Cable
052-0542-0001 .745 .250 Hex. .087 1Hex Nut 408-08522 RF-ASMB-89 010-0003-0000
18.92 6.35 2.21
S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2B Thread
032-0010-0001 .760 .255 Dia. .093 1Solderless Assembly 408-08521 RF-ASMB-88 010-0004-0000
19.30 6.48 2.36
032-0022-0001 .760 .255 Dia. .093 1408-08525 RF-ASMB-95 010-0004-0000
19.30 6.48 2.36
032-0067-0001 .755 .255 Dia. .108 1408-08522 RF-ASMB-89 010-0035-0000
19.18 6.48 2.74
032-0078-0001 .755 .255 Dia. .108 1Solderless Assembly 408-08521 RF-ASMB-88 010-0035-0000
19.18 6.48 2.74
032-0222-0001 .760 .281 Hex. .093 1Hex Nut w/ Safety Wire Holes, 408-08525 RF-ASMB-95 010-0004-0000
19.30 7.14 2.36 .014 [0.35] Wire Max.
052-0092-0001 .760 .255 Dia. .093 2408-08525 RF-ASMB-95 010-0004-0000
19.30 6.48 2.36
S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2B Thread
032-0011-0001 .760 .320 Dia. .134 1Solderless Assembly 408-08521 RF-ASMB-88 010-0005-0000
19.30 8.13 3.40
032-0017-0001 .760 .320 Dia. .134 1408-08525 RF-ASMB-95 010-0005-0000
19.30 8.13 3.40
032-0066-0001 .950 .350 Dia. .154 1Silicone Bend Relief Cap 408-08523 RF-ASMB-90 —
24.13 8.89 3.91
032-0071-0001 .760 .320 Dia. .134 1Cable Inner Conductor, 408-08525 RF-ASMB-95 010-0005-0000
19.30 8.13 3.40 .031 [0.78] Max.
032-0092-0001 .760 .320 Dia. .155 1408-08525 RF-ASMB-95 010-0044-0000
19.30 8.13 3.94
032-0099-0001 .760 .312 Hex. .134 1Hex Nut 408-08525 RF-ASMB-95 010-0005-0000
19.30 7.92 3.40
052-0200-0001 .760 .312 Hex. .134 1Hex Nut w/ Safety Wire Holes, 408-08525 RF-ASMB-95 010-0005-0000
19.30 7.92 3.40 .015 [0.38] Wire Max.
1Pin protected.
2Hole in ferrule permits soldering to clamp ring and shield for increased cable pullout strength.
B
A
Pin Protector
.030–.033
[.762–.838] Pin
Standard Connectors — Screw-On Series(Continued)
Coaxial Connectors
95
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Standard Connectors — Screw-On Series (Continued)
Right-Angle Plugs
S-50, 70 & 93
ANGLE PLUG
A
B
C
Dim. Dim. Dim. Cable Instruction Former Assembly
Part No. ABC
Jacket Special Features Sheet No. MICRODOT Tool
Max. I.S. No.
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2B Thread
032-0015-0001 .735 .225 Dia. .570 .092 408-08520 RF-ASMB-87 010-0016-0000
18.67 5.72 14.48 2.34
052-0204-0001 .735 .250 Hex. .570 .092 Hex Nut 408-08520 RF-ASMB-87 010-0016-0000
18.67 6.35 14.48 2.34
.735 .250 .570 .092 Hex Nut w/ Safety
052-0215-0001 18.67 6.35 Hex. 14.48 2.34 Wire Holes, 408-08520 RF-ASMB-87 010-0016-0000
.021 [.533] Wire Max.
052-0337-0001 .745 .225 Dia. .570 .111 Dual Shield Cable 408-08520 RF-ASMB-87 010-0016-0000
18.92 5.72 14.48 2.82
S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2B Thread
032-0013-0001 .745 .255 Dia. .570 .111 408-08520 RF-ASMB-87 010-0016-0000
18.92 6.48 14.48 2.82
.745 .281 .570 .111 Hex Nut w/ Safety
052-0299-0001 18.92 7.14 Hex. 14.48 2.82 Wire Holes, 408-08520 RF-ASMB-87 010-0016-0000
.014 [.355] Wire Max.
052-0379-0001 .745 .281 Hex. .570 .111 Hex Nut 408-08520 RF-ASMB-87 010-0016-0000
18.92 7.14 14.48 2.82
S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2B Thread
032-0014-0001 .745 .320 Dia. .630 .134 408-08520 RF-ASMB-87 010-0017-0000
18.92 8.13 16.00 3.40
032-0068-0001 .745 .320 Dia. .630 .155 408-08520 RF-ASMB-87 010-0017-0000
18.92 8.13 16.00 3.94
032-0153-0001 .745 .312 Hex. .630 .155 Hex Nut 408-08520 RF-ASMB-87 010-0017-0000
18.92 7.92 16.00 3.94
052-0207-0001 .745 .312 Hex. .630 .134 Hex Nut 408-08520 RF-ASMB-87 010-0017-0000
18.92 7.92 16.00 3.40
.745 .312 .630 .134 Hex Nut w/ Safety
052-0298-0001 18.92 7.92 Hex. 16.00 3.40 Wire Holes, 408-08520 RF-ASMB-87 010-0017-0000
.015 [.381] Wire Max.
Hex Nut w/ Safety
.745 .312 .630 .155 Wire Holes,
052-0304-0022 18.92 7.92 Hex. 16.00 3.94 .015 [.381] Wire Max., 408-08520 RF-ASMB-87 010-0017-0000
Silicone Bend
Relief Cap
Coaxial Connectors
96 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Jacks
S-50, 70 & 93
Dim. Dim. Cable Instruction Former Assembly
Part No. Fig. AB
Jacket Special Features Sheet No. MICRODOT Tool
Max. I.S. No.
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2A Thread
031-0033-0001 2 .870 .140 .088 408-08522 RF-ASMB-89 010-0003-0000
22.10 3.56 2.24
031-0034-0001 1 .750 .235 .087 408-08522 RF-ASMB-89 010-0003-0000
19.05 5.97 2.21
051-0467-0001 1 .720 .235 .079 Hex Collet Cable Clamp 408-08522 RF-ASMB-89 010-0003-0000
18.30 5.97 2.01
S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2A Thread
031-0036-0001 1 .760 .255 .093 408-08522 RF-ASMB-89 010-0004-0000
19.30 6.48 2.36
031-0048-0001 2.880 .140 .093 408-08525 RF-ASMB-95 010-0004-0000
22.35 3.56 2.36
031-0090-0001 1 .760 .255 .109 408-08522 RF-ASMB-89 010-0035-0000
19.30 6.48 2.77
S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2A Thread
031-0032-0001 2 .880 .155 .134 408-08525 RF-ASMB-95 010-0005-0000
22.35 3.94 3.40
031-0037-0001 1 .760 .320 .134 408-08525 RF-ASMB-95 010-0005-0000
19.30 8.13 3.40
031-0088-0001 1 1.000 .320 .154 408-08533 RF-ASMB-106 —
25.40 8.13 3.91
031-0089-0001 2 .750 .140 .154 No Mounting Flat, 408-08524 RF-ASMB-92 —
19.05 3.56 3.91 Hex Nut Cable Clamp
Ø B
A
Mounting Nut
.375
[9.52] Hex.
BMax. Panel
.400
[10.16]
.375
[9.52]
Lock Washer
Hex.
.292
[7.42]
Ø.313
[7.95]
Min.
Min.
Fig. 1 Fig. 2 Mounting Hole
Standard Connectors — Screw-On Series (Continued)
Coaxial Connectors
97
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Standard Connectors — Screw-On Series (Continued)
.200
±.005
[5.08
±.127
]
Typ.
Ø.055
[1.40] Min.
Typ.
.100
±.005
[2.54
±.127
]
Typ.
Mounting Pattern
for Fig. 3 & 4
FMin.
E Ø Min.
Mounting Hole
for Fig. 1 & 2
Receptacles
PartNo. Fig. Dim. Dim. Dim. Dim. Dim. Dim. Special Features
AB C DEF
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2A Thread
031-0001-0001 2 .515 .080 .187 .250 .191 — No Mounting Flat
13.08 2.03 4.75 Wrench Flats 6.35 4.85
031-0001-0003 2 .510 .110 .187 .250 .191 — No Mounting Flat
12.95 2.80 4.75 Wrench Flats 6.35 4.85
031-0002-0001 2 .515 .150 .187 .250 .191 — No Mounting Flat
13.08 3.81 4.75 Wrench Flats 6.35 4.85
031-0003-0001 2 .255 —.187 —.190 -32 — No Nut or Solder Lug, Threads into Panel
6.48 4.75 Wrench Flats 4.83
031-0024-0001 2 .555 .120 .344 .438 .345 — Housing Isolated by Nylon Insulator
14.10 3.05 8.74 Wrench Flats 11.13 8.76
031-0050-0001 1 .605 .160 .250 .250 .191 .173
15.37 4.06 6.35 Hex. 4.75 4.85 4.39
031-0059-0001 3 .340 .155 .330 ———
8.64 3.93 8.38 Dia.
031-0061-0001 4.425 .155 .330 .480 ——
10.80 3.93 8.38 Dia. 12.20
031-0062-0001 3 .345 .250 .330 ———
8.76 6.35 8.38 Dia.
051-0125-0001 2 .315 .125 .187 —.138 — No Mounting Thread, Solder or Press into Panel
8.00 3.18 4.75 Wrench Flats 3.50
051-0318-0001 1 .605 .160 .250 .250 .191 .173 w/ Safety Wire Holes, .014 [.355] Wire Max.
15.37 4.06 6.35 Hex. 4.75 4.85 4.39
051-0450-0001 3 .340 .050 .330 ———
8.64 1.27 8.38 Dia.
051-0459-0001 4 .425 .155 .330 .480 — — 3 Outer Legs
10.80 3.93 8.38 Dia. 12.20
S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2A Thread
031-0017-0001 2 .555 .100 .250 .281 .217 — No Mounting Flat
14.10 2.54 6.35 Hex. 7.14 5.51
031-0018-0001 2 .555 .160 .250 .281 .217 — No Mounting Flat
14.10 4.06 6.35 Hex. 7.14 5.51
031-0051-0001 1 .605 .160 .250 .281 .217 .197
15.37 4.06 6.35 Hex. 7.14 5.51 5.00
031-0069-0001 3.340 .155 .330 ———
8.64 3.94 8.38 Dia.
031-0072-0001 4.425 .155 .330 .480 ——
10.80 3.94 8.38 Dia. 12.20
A
C
B
Ø .037
[.940] Typ.
A
C
B
Ø .037
[.940] Typ.
.245
[6.22]
D
Fig. 3 Fig. 4
Solder Lug
BMax.
Panel
A
Mounting
Nut
DHex.
C
Turret
Solder Lug
BMax.
Panel
A
Mounting Nut
DHex.
C
Solder Pot
Fig. 1 Fig. 2
Coaxial Connectors
98 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Receptacles (Continued)
Part No. Fig. Dim. Dim. Dim. Dim. Dim. Dim. Special Features
AB C DEF
S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2A Thread
031-0016-0001 2 .555 .100 .312 .312 .251 — No Mounting Flat
14.10 2.54 7.92 Hex. 7.92 6.38
031-0019-0001 2 .555 .160 .312 .312 .251 —No Mounting Flat
14.10 2.54 7.92 Hex. 7.92 6.38
031-0046-0001 2 .555 .120 .345 .438 .345 —Housing Isolated by Nylon Insulator
3.05 3.05 8.76 Wrench Flats 11.13 8.76
031-0052-0001 1 .605 .160 .312 .312 .251 .232
15.37 2.54 7.92 Hex. 7.92 6.38 5.89
031-0067-0001 3 .340 .155 .330 ———
8.64 3.94 8.38 Dia.
031-0073-0001 4.425 .155 .330 .480 ——
10.80 3.94 8.38 Dia. 12.20
031-0080-0001 3 .345 .250 .330 ———
8.76 6.35 8.38 Dia.
Standard Connectors — Screw-On Series (Continued)
Coaxial Connectors
99
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Standard Connectors — Slide-On Series
All plugs shown below mate with all
jacks/receptacles shown below.
Plug
SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series
032-0055-0001 032-0060-0001 032-0077-0001
032-0087-0001 032-0084-0001
Right-Angle Plug
SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series
032-0063-0001 032-0062-0001 032-0059-0001
032-0083-0001
Jack
SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series
031-0053-0001 031-0095-0001 031-0063-0001
031-0093-0001
Plug Receptacle
SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series
032-0042-0001 032-0042-0001 032-0042-0001
052-0061-0001 052-0061-0001 052-0061-0001
052-0471-0001 052-0471-0001 052-0471-0001
Bulkhead Plug
SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series
032-0056-0001 032-0061-0001 032-0058-0001
Bulkhead Jack
SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series
031-0054-0001 031-0064-0001
031-0094-0001
Receptacle
SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series
031-0049-0001 031-0049-0001 031-0049-0001
051-0258-0001 051-0258-0001 051-0258-0001
051-0325-0001 051-0325-0001 051-0325-0001
Printed Circuit Receptacle
SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series
031-0060-0001 031-0060-0001 031-0060-0001
031-0065-0001 031-0065-0001 031-0065-0001
Right-Angle Printed Circuit Receptacle
SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series
031-0070-0001 031-0070-0001 031-0070-0001
Coaxial Connectors
100 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Straight Plugs
Dim. Dim. Dim. Dim. Dim. Cable Instruction Former Assembly
PartNo. Fig. ABCDE
Max. Special Sheet No. MICRODOT Tool
Jacket Features I.S. No.
SOS-50 Series (50 Ohm)
032-0042-0001 2 .705 .250 .160 .281 .217 —Turret Pin —— —
17.91 6.35 4.06 7.14 5.51 Contact Tail
032-0055-0001 1 .870 .250 ———
.088 408-08526 RF-ASMB-97 010-0007-0000
22.10 6.35 2.24
032-0056-0001 3 .950 .375 .145 .375 .313 .088 408-08526 RF-ASMB-97 010-0007-0000
24.13 9.53 3.68 9.53 7.95 2.24
052-0061-0001 2 .750 .250 .160 .281 .217 —Solder Pot ———
19.05 6.35 4.06 7.14 5.51 Contact Tail
052-0471-0001 2 .590 .250 .095 .281 .217 —Straight Pin —— —
14.99 6.35 2.41 7.14 5.51 Contact Tail1
SOS-70 Series (70 Ohm)
032-0042-0001 2 .705 .250 .160 .281 .217 —Turret Pin ———
17.91 6.35 4.06 7.14 5.51 Contact Tail
032-0060-0001 1 .880 .250 ———
.093 408-08529 RF-ASMB-102 010-0007-0000
22.35 6.35 2.36
032-0061-0001 3 .960 .375 .145 .375 .313 .093 408-08526 RF-ASMB-97 010-0007-0000
24.38 9.53 3.68 9.53 7.95 2.36
032-0087-0001 1 .880 .250 ———
.108 408-08526 RF-ASMB-97 010-0036-0000
22.35 6.35 2.24
052-0061-0001 2.750 .250 .160 .281 .217 —Solder Pot ———
19.05 6.35 4.06 7.14 5.51 Contact Tail
052-0471-0001 2.590 .250 .095 .281 .217 —Straight Pin ———
14.99 6.35 2.41 7.14 5.51 Contact Tail1
SOS-93 Series (93 Ohm)
032-0042-0001 2.705 .250 .160 .281 .217 —Turret Pin ———
17.91 6.35 4.06 7.14 5.51 Contact Tail
032-0058-0001 3 .960 .375 .145 .375 .313 .134 408-08529 RF-ASMB-102 010-1008-0000
24.38 9.53 3.68 9.53 7.95 3.40
032-0077-0001 1 .880 .250 ———
.134 408-08529 RF-ASMB-102 010-1008-0000
22.35 6.35 3.40
032-0084-0001 11.06 .250 ———.154 408-08523 RF-ASMB-90 —
26.92 6.35 3.91
052-0061-0001 2 .750 .250 .160 .281 .217 —Solder Pot —— —
19.05 6.35 4.06 7.14 5.51 Contact Tail
052-0471-0001 2 .590 .250 .095 .281 .217 —Straight Pin —— —
14.99 6.35 2.41 7.14 5.51 Contact Tail1
1Lockwasher supplied in place of solder lug.
ØB
A
Solder Lug
CMax.
Panel
A
Mounting Nut
DHex.
BHex.
Contact
Tail
.290
[7.37]
Fig. 1 Fig. 2
Plug Receptacle
Mounting Nut
BHex.
CMax. Panel
A
Hex.
Lock Washer
.500
[12.70]
ØE
Min.
Fig. 3
Bulkhead Plug Mounting Hole
for Fig. 2 & 3
Standard Connectors — Slide-On Series (Continued)
Coaxial Connectors
101
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Standard Connectors — Slide-On Series (Continued)
Min.
Ø .313
[7.95]
Mounting Hole
Jacks
Dim. Cable Instruction Former Assembly
Part No. Fig. AJacket Special Features Sheet No. MICRODOT Tool
Max. I.S. No.
SOS-50 Series (50 Ohm)
031-0053-0001 1 .800 .088 408-08531 RF-ASMB-104 010-0007-0000
20.32 2.24
031-0054-0001 2 .970 .088 408-08531 RF-ASMB-104 010-0007-0000
24.64 2.24
SOS-70 Series (70 Ohm)
031-0095-0001 1 .810 .108 408-08531 RF-ASMB-104 010-0036-0000
20.57 2.74
SOS-93 Series (93 Ohm)
031-0063-0001 1 .810 .134 408-08530 RF-ASMB-103 010-1008-0000
20.57 3.40
031-0064-0001 2 .980 .134 408-08530 RF-ASMB-103 010-1008-0000
24.89 3.40
031-0093-0001 1 1.100 .154 .305 [7.75] Dia. Over B.R. Cap 408-08532 RF-ASMB-105 —
27.94 3.91
031-0094-0001 2 .750 .154 Hex Nut Cable Clamp 408-08524 RF-ASMB-92 —
19.05 3.91
Ø.250
[6.35]
A
Mounting Nut
A
Lock Washer
.520
[13.21]
.375
[9.53] .375
[9.53]Hex.
Hex.
Right-Angle Plugs
Dim. Dim. Cable Instruction Former Assembly
Part No. AB
Max. Special Features Sheet No. MICRODOT Tool
O.D. I.S. No.
SOS-50 Series (50 Ohm)
032-0063-0001 .735 .545 .092 408-08520 RF-ASMB-87 010-0016-0000
18.67 13.84 2.34
SOS-70 Series (70 Ohm)
032-0062-0001 .745 .545 .111 408-08520 RF-ASMB-87 010-0016-0000
18.92 13.84 2.82
SOS-93 Series (93 Ohm)
032-0059-0001 .745 .605 .134 408-08520 RF-ASMB-87 010-0017-0000
18.92 15.37 3.40
032-0083-0001 .745 .605 .155 408-08520 RF-ASMB-87 010-0017-0000
18.92 15.37 3.94
B
A
Ø .250
[6.35]
Fig. 1 Fig. 2
Coaxial Connectors
102 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Receptacles
PartNo. Fig. Dim. Dim. Dim. Dim. Dim. Special Features
ABCDE
SOS-50 (50 Ohm), SOS-70 (70 Ohm), & SOS-93 (93 Ohm) Series
031-0049-0001 1 .715 .160 .250 .281 .217
18.16 4.06 6.35 Hex. 7.14 5.51
031-0060-0001 3 .340 .155 .330 ——
8.64 3.94 8.38 Dia.
031-0065-0001 3 .340 .250 .330 — —
8.64 6.35 8.38 Dia.
031-0070-0001 4 .425 .155 .330 .540 —
10.79 3.94 8.38 Dia. 13.72
051-0258-0001 2 .715 .160 .250 .281 .217
18.16 4.06 6.35 Hex. 7.14 5.51
051-0325-0001 1 .570 .140 .250 —.216-32 No Nut or Lockwasher,Threads into Panel
14.48 3.56 6.35 Hex. 5.49 Thd.
Ø .037
[.940]
A
C
B
Typ.
A
D
Ø .037
[.940]
.245
[6.22]
Typ.
C
Ø .055
[1.40]
.100
±.005
[2.54
±0.13
]
.200
±.005
[5.08
±0.13
]
Typ.
Typ.
Min.
Typ.
Fig. 3 Fig. 4 Mounting Pattern
for Fig. 3 & 4
Solder Lug
BMax.
Panel
A
Mounting
Nut
DHex.
Turret
Solder Lug
BMax.
Panel
A
Mounting
Nut
DHex.
Solder Pot
Ø E
Min.
Fig. 1 Fig. 2 Mounting Hole
for Fig. 1 & 2
Standard Connectors — Slide-On Series (Continued)
Coaxial Connectors
103
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Standard Connectors — Quick-Connect Series
Plug
QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series
032-0002-0001 032-0016-0001 032-0012-0001
032-0030-0001 032-0031-0001 032-0032-0001
032-0079-0001 032-0072-0001
Right-Angle Plug
QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series
032-0026-0001 032-0027-0001 032-0020-0001
052-0228-0001
Jack
QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series
031-0038-0001 031-0040-0001
Receptacle
QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series
031-0057-0001 031-0057-0001 031-0058-0001
031-0085-0001
Receptacle
QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series
031-0004-0001 031-0004-0001 031-0020-0001
031-0005-0001 031-0005-0001 031-0021-0001
031-0006-0001 031-0006-0001
051-0586-0001 051-0586-0001
Coaxial Connectors
104 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Straight Plugs
Dim. Dim. Cable Instruction Former Assembly
Part No. AB
Jacket Special Features Sheet No. MICRODOT Tool
Max. I.S. No.
QC-50 Series (50 Ohm)
032-0002-0001 .820 .250 .093 Solderless Assembly 408-08527 RF-ASMB-100 010-0007-0000
20.83 6.35 2.36
032-0030-0001 .820 .250 .093 408-08526 RF-ASMB-97 010-0007-0000
20.83 6.35 2.36
QC-70 Series (70 Ohm)
032-0016-0001 .830 .250 .093 Solderless Assembly 408-08527 RF-ASMB-100 010-0007-0000
21.08 6.35 2.36
032-0031-0001 .830 .250 .093 408-08529 RF-ASMB-102 010-0007-0000
21.08 6.35 2.36
032-0079-0001 .840 .250 .108 408-08526 RF-ASMB-97 010-0036-0000
21.34 6.35 2.74
QC-93 Series (93 Ohm)
032-0012-0001 .845 .312 .134 Solderless Assembly 408-08527 RF-ASMB-100 010-0008-0000
21.46 7.92 3.40
032-0032-0001 .845 .312 .134 408-08529 RF-ASMB-102 010-0008-0000
21.46 7.92 3.40
032-0072-0001 1.050 .312 .154 Mates with 031-0085-0001 Only 408-08523 RF-ASMB-90 —
26.67 7.92 3.91
A
B
Right-Angle Plugs
Dim. Dim. Dim. Cable Instruction Former Assembly
Part No. ABC
Jacket Special Features Sheet No. MICRODOT Tool
Max. I.S. No.
QC-50 Series (50 Ohm)
032-0026-0001 .735 .250 .605 .092 408-08520 RF-ASMB-87 010-0016-0000
18.67 6.35 15.37 2.34
QC-70 Series (70 Ohm)
032-0027-0001 .745 .250 .605 .111 408-08520 RF-ASMB-87 010-0016-0000
18.92 6.35 15.37 2.82
QC-93 Series (93 Ohm)
032-0020-0001 .745 .312 .635 .134 408-08520 RF-ASMB-87 010-0017-0000
18.92 7.92 16.13 3.40
052-0228-0001 .745 .312 .720 .155 Mates with 408-08520 RF-ASMB-87 010-0017-0000
18.92 7.92 18.29 3.94 031-0085-0001 Only
A
B
C
Ø
Standard Connectors — Quick-Connect Series (Continued)
Coaxial Connectors
105
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Standard Connectors — Quick-Connect Series (Continued)
Jacks
Dim. Dim. Cable Instruction Former Assembly
Part No. ABJacket Special Features Sheet No. MICRODOT Tool
Max. I.S. No.
QC-50 Series (50 Ohm)
031-0038-0001 .750 .250 .093 408-08531 RF-ASMB-104 010-0007-0000
19.05 6.35 2.36
QC-93 Series (93 Ohm)
031-0040-0001 .760 .320 .134 408-08530 RF-ASMB-103 010-1009-0000
19.30 8.13 3.40
A
B
Receptacles
A
B
Max. Panel
CHex.
Solder Lug
DHex.
Turret
Mounting
Nut
Solder Lug
Solder
Pot
Mounting
Nut
A
CHex.
B
Max. Panel
DHex.
FMin.
E Ø
Min.
Fig. 1 Fig. 2 Mounting Hole
Part No. Fig. Dim. Dim. Dim. Dim. Dim. Dim. Special Features
ABCDEF
QC-50 Series (50 Ohm) & QC-70 Series (70 Ohm)
031-0004-0001 2 .555 .095 .250 .250 .191 — No Mounting Flat
14.10 2.41 6.35 6.35 4.85
031-0005-0001 2 .555 .165 .250 .250 .191 — No Mounting Flat
14.10 4.19 6.35 6.35 4.85
031-0006-0001 2.250 —.250 —.190-32 Thd —No Nut or Solder Lug, Threads into Panel
6.35 6.35 4.83
031-0057-0001 1 .605 .165 .250 .250 .191 .173
15.37 4.19 6.35 6.35 4.85 4.39
051-0586-0001 2 .555 .165 .250 .250 .191 — No Mounting Flat, Split Solder Lug
14.10 4.19 6.35 6.35 4.85
QC-93 Series (93 Ohm)
031-0020-0001 2 .555 .095 .312 .312 .251 — No Mounting Flat
14.10 2.41 7.92 7.92 6.38
031-0021-0001 2 .555 .165 .312 .312 .251 — No Mounting Flat
14.10 4.19 7.92 7.92 6.38
031-0058-0001 1.605 .160 .312 .312 .251 .232
15.37 4.06 7.92 7.92 6.38 5.89
031-0085-0001 1.715 .165 .312 .312 .251 —No Mounting Flat, Mates with
18.16 4.19 7.92 7.92 6.38 032-0072-0001 & 052-0228-0001 Only
Coaxial Connectors
106 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Twinax Plugs:
For cables with two inner
conductors and one shield
Dim. Dim. Cable Instruction Former Assembly
Part No. Fig. ABJacket Special Features Sheet No. MICRODOT Tool
Max. I.S. No.
032-0088-0001 1 1.085 .312 .167 408-08528 RF-ASMB-101 010-0031-0000
27.56 7.92 4.24
032-0093-0001 1 1.085 .312 .123 408-08528 RF-ASMB-101 010-0031-0000
27.56 7.92 3.12
052-0229-0001 2 1.085 .440 .123 408-08517 RF-ASMB-61 010-0172-0000
27.56 11.18 3.12
052-0324-0001 2 1.095 .440 .167 408-08517 RF-ASMB-61 010-0172-0000
27.81 11.18 4.24
A
B
A
B
Fig. 1
Slide-On Series Fig. 2
Screw-On Series
Twinax Receptacles and
Jacks:
A
BMax. Panel
Lockwasher W asher Mounting Nut
Solder
Pot
DHex.
CHex.
Mounting Nut
Lockwasher Solder Pot
A
CHex.
BMax.
DHex.
Panel
Fig. 1
Slide-On Series Fig. 2
Slide-On Series or Screw-On Series
A
DHex.
Mounting Nut Lockwasher
CHex.
BMax.
Panel
FMin.
E Ø Min.
Fig. 3
Slide-On Series or Screw-On Series Mounting Hole
Dim. Dim. Dim. Dim. Dim. Dim. Cable Special Instruction Former Assembly
Part No. Fig. ABCDEF
Max. Features Sheet No. MICRODOT Tool
Jacket I.S. No.
031-0098-0001 1.812 .155 .375 .375 .313 .292 ————
20.62 3.94 9.53 9.53 7.95 7.42
051-0248-0001 2.960 .155 .437 .375 .313 .292 ————
24.38 3.94 11.10 9.53 7.95 7.42
051-0358-0001 3 1.060 .0751.437 .500 .376 .351 .167 Lockwasher 408-08516 RF-ASMB-44 010-0186-0000
26.92 1.91 11.10 12.7 9.55 8.92 4.24 not included
051-0389-0001 3 1.255 .2552.437 .500 .376 .351 .167 408-08516 RF-ASMB-44 010-0186-0000
31.88 6.48 11.10 12.7 9.55 8.92 4.24
1.075 [1.91] Max. Panel when mated with a Screw-On plug, .180 [4.57] Max. Panel when mated with a Slide-On plug.
2.255 [6.48] Max. Panel when mated with a Screw-On plug, .360 [9.14] Max. Panel when mated with a Slide-On plug.
Standard Connectors — Twinax Series
Coaxial Connectors
107
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Standard Connectors — Triax Series and Terminals
Triax Plugs:
For cables with one inner
conductor and two isolated
shields
Dim. Dim. Cable Instruction Former Assembly
Part No. ABJacket Special Features Sheet No. MICRODOT Tool
Max. I.S. No.
052-0130-0001 1.37 .440 .124 408-08514 RF-ASMB-20 —
34.80 11.18 Dia. 3.15
052-0138-0001 1.37 .440 .183 408-08515 RF-ASMB-21 —
34.80 11.18 Dia. 4.65
052-0593-0001 1.37 .438 .214 Hex Nut w/ Safety Wire Holes, 408-08518 RF-ASMB-73 —
34.80 11.13 Hex. 5.44 .027 [.686] Wire Max.
A
B
Triax Receptacle:
1.11
[28.19]
.160
[4.06]
0.50
[12.70] 0.56
[14.22]
Max.
Panel
Hex. Hex.
Nut
Lockwasher Mounting Nut
Ø .438
[11.13] Min.
PartNumber 051-0618-0001 Mounting Hole
Triax Adapter:
1.09
[27.69]
0.56
[14.22]
.160
[4.06]
0.62
[15.75]
Lockwasher Mounting Nut
Max.
Panel
Hex.
Hex.
Ø .501
[12.73]
.468
[11.89]Min.
Min.
PartNumber 053-0161-0001
Mates with Triax Plug, Both Ends Mounting Hole
Terminals
Ø B ØA
CD
Fig. 1
Fig. 2
Dim. Dim. Dim. Dim. Cable Cable Max.
PartNo. Fig. ABCDMax. Inner
Dielectric Conductor
053-0354-0003 1 .030 .080 .630 .375 .050 .015
.762 2.03 16.00 9.53 1.27 .381
053-0249-0001 1 .030 .105 .630 .375 .071 .021
.762 2.67 16.00 9.53 1.80 .533
053-0495-0001 1 .030 .125 .880 .610 .083 .022
.762 3.18 22.35 15.49 2.11 .559
053-0656-0001 1 .030 .145 .880 .375 .108 .023
.762 3.68 22.35 9.53 2.74 .584
053-0294-0002 1 .030 .145 .880 .625 .108 .023
.762 3.68 22.35 15.88 2.74 .584
033-0115-0002 2 .040 .063 .255 .100 .042 .023
1.02 1.60 6.48 2.54 1.07 .584
033-0116-0001 2.040 .094 .300 .100 .068 .023
1.02 2.39 7.62 2.54 1.73 .584
033-0117-0001 2 .040 .140 .350 .200 .108 .023
1.02 3.56 8.89 5.08 2.74 .584
053-0154-0001 1 .041 .080 .430 .175 .050 .019
1.04 2.03 10.92 4.45 1.27 .483
053-0250-0001 1 .041 .080 .505 .250 .050 .019
1.04 2.03 12.83 6.35 1.27 .483
053-0020-0003 1 .041 .080 .630 .375 .050 .015
1.04 2.03 16.00 9.53 1.27 .381
053-0021-0003 1.041 .105 .630 .375 .071 .023
1.04 2.67 16.00 9.53 1.80 .584
053-0267-0003 1.041 .105 .875 .625 .071 .023
1.04 2.67 22.23 15.88 1.80 .584
053-0265-0001 2 .041 .128 .505 .250 .102 .021
1.04 3.25 12.83 6.35 2.59 .533
053-0230-0001 2 .041 .128 .630 .375 .102 .018
1.04 3.25 16.00 9.53 2.59 .457
053-0155-0001 1.041 .145 .430 .175 .108 .023
1.04 3.68 10.82 4.45 2.74 .584
053-0022-0003 1 .041 .145 .630 .375 .108 .023
1.04 3.68 16.00 9.53 2.74 .584
053-0388-0001 2 .042 .098 .500 .250 .065 .021
1.07 2.49 12.70 6.35 1.65 .533
053-0251-0001 2 .042 .098 .630 .375 .065 .021
1.07 2.49 16.00 9.53 1.65 .533
Terminals are gold plated.
See applicable MICRODOT
drawing for solder and crimp
instructions.
Coaxial Connectors
108 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
The five faces of basic
block can be used to mount
any one of 10 different ter-
minations. The 5 faces are
coded with letters as shown
above. The 10 terminations
are coded with Nos. 1–10.
Part number, to be com-
plete, must show face loca-
tion and termination Nos.
desired. (Ex: illustration
shows 033-0042—A2—
B7—C6—D5—E1) Ordering
part number will be convert-
ed to a MICRODOT
assigned number at time of
ordering.
Wedo not stock complete
assemblies.
.242
[6.15]
.375
[9.53]
AB
C
DE
Size Part No. Dim. H
50Ohm 033-0042* .250
6.35
70Ohm 033-0043* .250
6.35
93 Ohm 033-0044* .300
7.62
*Part number to be completed by
customer. A Computer Part Number
will be assigned by Tyco
Electronics.
Interfaces/Terminations
Termination 123456
Number
Mating SS QC QC SOS SOS
Type
Description Receptacle Plug with Receptacle Plug Receptacle Plug
Knurl Nut
Thread Thread Dia. Dia. Dia.
50 Series .190-32 UNF .190-32 UNF .230 .250 .250
4.83 4.83 5.84 6.35 6.35
70 Series .216-32 UNEF .216-32 UNEF .255 .250 .250
5.49 5.49 6.48 6.35 6.35
93 Series .250-32 UNEF .250-32 UNEF .320 .312 .250
6.35 6.35 8.13 7.92 6.35
Interfaces/Terminations (Continued)
Termination 78910
Number
Mating ——SS
Type
Description Bulkhead Stud Bulkhead Plug with Plug, Hex. Nut
Receptacle Hex. Nut With Wire Holes
Thread Thread Hex. Min. Hole Min. Hole Thread Hex. Thread Hex.
Dia. Height
50 Series .190-32 UNF .190-32 UNF .250 .191 .173 .190-32 UNF .250 .190-32 UNF .250
4.83 4.83 6.35 4.85 4.39 4.83 6.35 4.83 6.35
70 Series .190-32 UNF .216-32 UNEF .281 .217 .197 .216-32 UNEF .281 .216-32 UNEF .281
4.83 5.49 7.14 5.51 5.00 5.49 7.14 5.49 7.14
93 Series .190-32 UNF .250-32 UNEF .312 .251 .232 .250-32 UNEF .312 .250-32 UNEF .312
4.83 6.35 7.92 6.38 5.89 6.35 7.92 6.35 7.92
.125
[3.18]
.320
[8.13]
Ø
.125
[3.18]
.345
[8.76]
Ø
.255
[6.48]
.290
[7.37]
Ø
Ø .191
[4.85]
.173
[4.39]
.350
[8.89] .160
[4.06]
.250
[6.35]
Max.
Panel
Hex.
Min.
Min.
Solder Lug
Mounting Nut
.420
[10.67] .160
[4.06]Max.
Panel ØMin.
Height
Min.
Hex.
Solder Lug
Turret
Mounting Nut
.320
[8.13]
Hex.
.320
[8.13]
Ø.030
[.762]
3 Plcs.
Hex.
Standard Connectors — Module Blocks
Coaxial Connectors
109
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Standard Connectors — Caps, Hoods
Caps, Screw-On Series
For Receptacles and Jacks
0.13
[3.30]
0.20
[5.08]
.094
[2.39]
Ø A
Diamond Knurl
Ø
Receptacle Hoods
A
B
Hex. Ø C
0.20
[5.08] 0.12
[3.05]
Ø.094
[2.39]
ØA
Diamond Knurl
Fig. 1
With Grounding Pin
Fig. 2
Without Grounding Pin
Part No. Fig. Dim. A
S-50 Series
033-0046-0001 1 .235
5.97
033-0056-0001 2 .235
5.97
S-70 Series
033-0047-0001 1 .255
6.48
033-0057-0001 2 .255
6.48
S-93 Series
033-0048-0001 1 .315
8.00
033-0058-0001 2 .315
8.00
Material — Brass per QQ-B-626
Finish —Silver plate per QQ-S-365,
.0002 [.005] min.
Note: All caps can be supplied with .094
[2.39] Dia. bead chain and end ring.
When ordering, specify chain length and
end ring hole size (.130 [3.30], .140
[3.56], .167 [4.24], or .193 [4.90] Dia.)
Part No. Dim. Dim. Dim. Thread For Receptacle Series
ABC
033-0067-0001 .490 .250 .098 .190-32 UNF S-50, QC-50, QC-70
12.45 6.35 2.49 4.83
033-0068-0001 .490 .250 .114 .216-32 UNEF S-70, SOS-50, SOS-70, SOS-93
12.45 6.35 2.90 5.49
033-0069-0001 .490 .312 .156 .250-32 UNEF S-93, QC-93
12.45 7.92 3.96 6.35
033-0084-0001 .490 .250 .156 .216-32 UNEF S-70, SOS-50, SOS-70, SOS-93
12.45 6.35 3.96 5.49
053-0147-0001 .840 .437 .156 .375-32 UNEF Twinax/Triax Receptacle
21.34 11.10 3.96 9.53
Material — Brass per QQ-B-626
Finish —Silver plate per QQ-S-365, .0002 [.005] min.
Coaxial Connectors
110 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
A
B
Hex.“X” “Y”
Fig. 1
A
B
Hex.
Lockwasher Mounting Nut
“X” “Y”B
Hex.
Nut
.160
[4.06]Max.
Panel
Fig. 2
Ø.313
[7.95]
.294
[7.47]
Min.
Min.
Mounting Hole
Part No. Fig. Dim. Dim. End “X” Is End “Y” Is
AB
033-0001-0001 1 .300 .250 S-50 Receptacle S-50 Receptacle
7.62 6.35
033-0053-0001 2 .600 .375 S-50 Receptacle S-50 Receptacle
15.24 9.53
033-0023-0001 1 .400 .250 S-70 Receptacle S-70 Receptacle
10.16 6.35
033-0054-0001 2 .600 .375 S-70 Receptacle S-70 Receptacle
15.24 9.53
033-0036-0001 1 .410 .312 S-93 Receptacle S-93 Receptacle
10.41 7.92
033-0055-0001 2 .600 .375 S-93 Receptacle S-93 Receptacle
15.24 9.53
Feed-Thru Adapters
for Screw-On Series
End “A” Is: Configuration End “B” Is: 50 Series 70 Series 93 Series
Part No. Part No. Part No.
Screw-On (S)
BNC Plug Type Plug 033-0103-0001 033-0107-0001 033-0111-0001
Screw-On
BNC Plug Type 033-0101-0001 033-0105-0001 033-0109-0001
Receptacle
BNC Screw-On (S)
Receptacle Type Plug 033-0104-0001 053-0108-0001 033-0112-0001
BNC Screw-On (S)
Receptacle Type 033-0102-0001 033-0106-0001 033-0110-0001
Receptacle
BNC Bulkhead Screw-On (S)
Receptacle Type Plug 033-0127-00011— 033-0129-00011
1Mounting information: Housing Hex. .688 [17.48], Mtg. Nut Hex. .625 [15.88], Max. Panel .090 [2.29].
BNC and TNC/MICRODOT
Adapters for Screw-On,
Slide-On, and Quick-
Connect Series
For mating BNC/TNC
connectors to MICRODOT
standard connectors.
AB
AB
AB
AB
AB
.469
[11.91]
.501
[12.73]
Min.
Min.
Mounting Hole
Standard Connectors — Adapters
Coaxial Connectors
111
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Standard Connectors — Adapters (Continued)
BNC and TNC/MICRODOT
Adapters for Screw-On,
Slide-On, and Quick-
Connect Series (Continued)
End “A” Is: Configuration End “B” Is: 50Series 70 Series 93 Series
Part No. Part No. Part No.
BNC Bulkhead Screw-On (S)
Receptacle Type 033-0090-00011033-0125-00011033-0126-00011
Receptacle
Screw-On (S)
TNC Plug Type 033-0141-0001 033-0143-0001 033-0145-0001
Receptacle
TNC Screw-On (S)
Receptacle Type 033-0153-0001 — —
Receptacle
BNC Slide-On (SOS)
Plug Type Plug 053-0339-0001 053-0339-0001 053-0339-0001
BNC Slide-On (SOS)
Plug Type 033-0081-0001 033-0081-0001 033-0081-0001
Receptacle
BNC Slide-On (SOS)
Receptacle Type Plug 033-0092-0001 033-0092-0001 033-0092-0001
BNC Slide-On (SOS)
Receptacle Type 033-0082-0001 033-0082-0001 033-0082-0001
Receptacle
BNC Slide-On (SOS)
Bulkhead Type 033-0124-00011033-0124-00011033-0124-00011
Receptacle Receptacle
BNC Quick-Connect
Plug (QC) Type 033-0093-0001 033-0093-0001 033-0097-0001
Receptacle
BNC Quick-Connect
Receptacle (QC) Type 033-0094-0001 033-0094-0001 —
Receptacle
1Mounting information: Housing Hex. .688 [17.48], Mtg. Nut Hex. .625 [15.88], Max. Panel .090 [2.29].
AB
AB
AB
AB
AB
AB
AB
AB
AB
AB
.469
[11.91]
.501
[12.73]
Min.
Min.
Mounting Hole
Coaxial Connectors
112 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Performance Data
Summary
For Gold Plated Crimp Style
Coaxial Connectors
Mechanical
Captive Contacts —Terminated con-
nector contacts captivated from move-
ment in both directions.
Cable Retention —
50 Ohm connectors, 15 lb. min.
70 Ohm connectors, 25 lb. min.
93 Ohm connectors, 25 lb. min.
Recommended Coupling Torque
(Threaded Interface) —
8inch/pounds max. [.904 Nm]
Recommended Receptacle
Mounting Torque (Threaded
Interface) —8inch/pounds max.
[.904 Nm]
Contact Protection (Unmated) —
Pin contact protected by coupling nut.
Socket protected by insulator and
housing.
Assembly Methods
Straight Plugs & Jacks —Cable
Inner Conductor: Crimped to contact.
Cable Shield: Crimped under housing.
Right-Angle Plugs —Cable Inner
Conductor: Crimped to contact. Cable
Shield: Crimped under housing.
Environmental
Temperature Range (Continuous
Service) —-80°F to +392°F.
[-62°C to +200°C].
Vibration1,2 —MIL-STD-202, Method
204, Test condition B (15 G peak). No
physical damage or electrical disconti-
nuities in excess of 1 microsecond.
Shock1,2 —MIL-STD-202, Method
213, Test Condition H. No physical dam-
age or electrical discontinuity after
shock.
Thermal Shock —MIL-STD-202,
Method 107, Test Condition C.
Moisture Resistance1—MIL-STD-
202, Method 106.
Salt Spray1—MIL-STD-202, Method
101, Test Condition B (48 hours).
Electrical
Impedance —Designed to be com-
patible with 50, 70, or 93 Ohm miniature
coaxial cable.
Dielectric Withstanding Voltage —
1000 volts RMS at sea level.
Contact Resistance — 4 milliohms
max., D.C.
Contact Capacity — 3 amps, D.C.
Insulation Resistance —5x103
Megohms min. @ 500 volts D.C.
Voltage Standing Wave Ratio3
(VSWR) —Typical 50 Ohm series, 1.2
max. to 2 GHz.
Materials
Housing, Nut, Inner Sleeve —
Brass per ASTM-B-16, 35% Zinc.
Insulator —TEFLON per
ASTM-D-1710.
Pin & Socket Contacts —Beryllium
Copper per ASTM-B-196.
Middle Sleeve —Copper Alloy.
Facial Seal4,Sealing Sleeve &
Gasket —Silicone Rubber per
ZZ-R-765.
Lockwasher —#425 Bronze Alloy.
Plating
Contacts, Housing, Nut,
Inner Sleeve, Middle Sleeve,
Lockwasher — Gold per MIL-G-45204,
Type II, Grade C, Class 1.
NOTES:
1Screw-On Series threaded inter-
face.
2Tyco Electronics recommends the
use of wired connectors in vibration
and shock environments. See indi-
vidual specifications for connectors
with wire holes.
3VSWR is a system specification.
Where performance is critical,
purchase Tyco Electronics cable
assemblies (See page 127) and
specify VSWR testing and mating
connector part numbers.
Gold Plated Crimp Style Coaxial Connectors
Coaxial Connectors
113
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Gold Plated Crimp Style Coaxial Connectors — Screw-On Series
Straight Plugs
A
B
Hex.
A
ØB
Fig. 1
Partial Hex. Nut Fig. 2
Knurl Nut
A
B
Hex.
A
B
Hex.
Fig. 3
Full Hex. Nut Fig. 4
Hex. Nut w/ 3 Safety Wire Holes
Dim. Dim. Cable Instruction Former
Part No. Fig. A B Max. Special Features Sheet No. MICRODOT
I.S. No.
50Ohm Series .190 [4.83] -32 UNF-2B Thread
132-0112-0001 1 .800 .250 .088 408-08508 RF-ASMB-8
20.32 6.35 2.24
132-0112-0002 2 .800 .250 .088 408-08508 RF-ASMB-8
20.32 6.35 2.24
132-0112-0003 3 .800 .250 .088 408-08508 RF-ASMB-8
20.32 6.35 2.24
132-0112-0004 4 .800 .250 .088 408-08508 RF-ASMB-8
20.32 6.35 2.24
132-0113-0001 1 .800 .250 .088 With environmental seal 408-08508 RF-ASMB-8
20.32 6.35 2.24
132-0113-0002 2 .800 .250 .088 With environmental seal 408-08508 RF-ASMB-8
20.32 6.35 2.24
132-0113-0003 3 .800 .250 .088 With environmental seal 408-08508 RF-ASMB-8
20.32 6.35 2.24
132-0113-0004 4 .800 .250 .088 With environmental seal 408-08508 RF-ASMB-8
20.32 6.35 2.24
132-0114-0001 1 .800 .250 .110 408-08508 RF-ASMB-8
20.32 6.35 2.79
132-0114-0002 2 .800 .250 .110 408-08508 RF-ASMB-8
20.32 6.35 2.79
132-0114-0003 3 .800 .250 .110 408-08508 RF-ASMB-8
20.32 6.35 2.79
132-0114-0004 4 .800 .250 .110 408-08508 RF-ASMB-8
20.32 6.35 2.79
132-0115-0001 1.800 .250 .110 With environmental seal 408-08508 RF-ASMB-8
20.32 6.35 2.79
132-0115-0002 2 .800 .250 .110 With environmental seal 408-08508 RF-ASMB-8
20.32 6.35 2.79
132-0115-0003 3 .800 .250 .110 With environmental seal 408-08508 RF-ASMB-8
20.32 6.35 2.79
132-0115-0004 4.800 .250 .110 With environmental seal 408-08508 RF-ASMB-8
20.32 6.35 2.79
132-0509-0002 2 .800 .250 .116 Dual shield cable version 408-08508 RF-ASMB-8
20.32 6.35 2.95 of RG 188 & 316
70 Ohm Series .216 [5.49] -32 UNEF-2B Thread
132-0200-0001 1 .800 .281 .110 408-08508 RF-ASMB-8
20.32 7.14 2.79
132-0200-0002 2 .800 .290 .110 408-08508 RF-ASMB-8
20.32 7.37 2.79
132-0200-0003 3 .800 .281 .110 408-08508 RF-ASMB-8
20.32 7.14 2.79
132-0200-0004 4 .800 .281 .110 408-08508 RF-ASMB-8
20.32 7.14 2.79
132-0201-0001 1.800 .281 .110 With environmental seal 408-08508 RF-ASMB-8
20.32 7.14 2.79
132-0201-0002 2.800 .290 .110 With environmental seal 408-08508 RF-ASMB-8
20.32 7.37 2.79
132-0201-0003 3 .800 .281 .110 With environmental seal 408-08508 RF-ASMB-8
20.32 7.14 2.79
132-0201-0004 4 .800 .281 .110 With environmental seal 408-08508 RF-ASMB-8
20.32 7.14 2.79
Coaxial Connectors
114 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Dim. Dim. Cable Instruction Former
Part No. Fig. A B Max. Special Features Sheet No. MICRODOT
I.S. No.
93 Ohm Series .250 [6.35] -32 UNEF-2B Thread
132-0300-0001 1 .795 .312 .155 408-08508 RF-ASMB-8
20.19 7.92 3.94
132-0300-0002 2 .795 .320 .155 408-08508 RF-ASMB-8
20.19 8.13 3.94
132-0300-0003 3 .795 .312 .155 408-08508 RF-ASMB-8
20.19 7.92 3.94
132-0300-0004 4 .795 .312 .155 408-08508 RF-ASMB-8
20.19 7.92 3.94
132-0301-0001 1 .795 .312 .155 With environmental seal 408-08508 RF-ASMB-8
20.19 7.92 3.94
132-0301-0002 2 .795 .320 .155 With environmental seal 408-08508 RF-ASMB-8
20.19 8.13 3.94
132-0301-0003 3 .795 .312 .155 With environmental seal 408-08508 RF-ASMB-8
20.19 7.92 3.94
132-0301-0004 4 .795 .312 .155 With environmental seal 408-08508 RF-ASMB-8
20.19 7.92 3.94
Dim. Dim. Dim. Cable Instruction Former
Part No. ABC
Jacket Special Features Sheet No. MICRODOT
Max. I.S. No.
50 Ohm Series .190 [4.83] -32 UNF-2B Thread
132-0116-0002 .660 .250 .620 .088 408-08509 RF-ASMB-11
16.76 6.35 15.75 2.24
132-0117-0002 .660 .250 .620 .088 With environmental seal 408-08509 RF-ASMB-11
16.76 6.35 15.75 2.24
132-0118-0002 .695 .250 .650 .110 408-08509 RF-ASMB-11
17.65 6.35 16.51 2.79
132-0119-0002 .695 .250 .650 .110 With environmental seal 408-08509 RF-ASMB-11
17.65 6.35 16.51 2.79
70 Ohm Series .216 [5.49] -32 UNEF-2B Thread
132-0202-0002 .695 .290 .650 .110 408-08509 RF-ASMB-11
17.65 7.37 16.51 2.79
132-0203-0002 .695 .290 .650 .110 With environmental seal 408-08509 RF-ASMB-11
17.65 7.37 16.51 2.79
93 Ohm Series .250 [6.35] -32 UNEF-2B Thread
132-0302-0002 .710 .320 .680 .155 408-08509 RF-ASMB-11
18.03 8.13 17.27 3.94
132-0303-0002 .710 .320 .680 .155 With environmental seal 408-08509 RF-ASMB-11
18.03 8.13 17.27 3.94
Right-Angle Plugs
C
A
Ø B
Knurl Nut
Straight Plugs (Continued)
Gold Plated Crimp Style Coaxial Connectors — Screw-On Series (Continued)
Coaxial Connectors
115
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Gold Plated Crimp Style Coaxial Connectors — Screw-On Series (Continued)
Dim. Dim. Dim. Cable Instruction Former
Part No. Fig. ABC
Jacket Special Features Sheet No. MICRODOT
Max. I.S. No.
50 Ohm Series .190 [4.83] -32 UNF-2B Thread
131-0134-0001 1 .770 .250 —.088 408-08508 RF-ASMB-8
19.56 6.35 2.24
131-0135-0001 2 .770 .360 .105 .088 408-08508 RF-ASMB-8
19.56 9.14 2.67 2.24
131-0136-0001 1 .770 .250 —.110 408-08508 RF-ASMB-8
19.56 6.35 2.79
131-0137-0001 2 .770 .360 .105 .110 408-08508 RF-ASMB-8
19.56 9.14 2.67 2.79
131-0150-0001 1 .770 .250 —.116Dual Shield Cable 408-08508 RF-ASMB-8
19.56 6.35 2.95 Version of RG 188 & 316
131-0151-0001 2 .770 .360 .105 .116 Dual Shield Cable 408-08508 RF-ASMB-8
19.56 9.14 2.67 2.95 Version of RG 188 & 316
70 Ohm Series .216 [5.49] -32 UNEF-2B Thread
131-0200-0001 1 .770 .281 —.110 408-08508 RF-ASMB-8
19.56 7.14 2.79
131-0201-0001 2 .770 .360 .100 .110 408-08508 RF-ASMB-8
19.56 9.14 2.54 2.79
93 Ohm Series .250 [6.35] -32 UNEF-2B Thread
131-0300-0001 1 .760 .312 —.155 408-08508 RF-ASMB-8
19.30 7.92 3.94
131-0301-0001 2 .760 .350 .095 .155 408-08508 RF-ASMB-8
19.30 8.89 2.41 3.94
Jacks
A
B
Hex.
Fig. 1
BCMax.
Panel
Mounting Nut Lockwasher
.375
[9.53]
.375
[9.53] Hex.
Hex.
Nut
.292
[7.42]
.313
[7.95]Min.
Min.
Ø
Fig. 2 Mounting Hole
Coaxial Connectors
116 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Receptacles
Gold Plated Crimp Style
Coaxial Connectors
Assembly Tools
Part No. Fig. Dim. Dim. Dim. Dim. Dim. Dim. Special Features
A B C DEF
50 Ohm Series .190 [4.83] -32 UNF-2A Thread
131-0138-0002 1 .605 .160 .250 .250 .191 .173
15.37 4.06 6.35 Hex. 6.35 4.85 4.39
131-0139-0002 2 .515 .150 .187 .250 .191 — No Mounting Flat
13.08 3.81 4.75 Wrench Flats 6.35 4.85
131-0140-0001 2 .255 —.187 —.190 -32 Thd. — No Nut or Solder Lug, Threads into Panel
6.48 4.75 Wrench Flats 4.83
131-0141-0002 3 .340 .155 .330 ———
8.64 3.94 8.38 Dia.
131-0142-0002 4 .425 .155 .330 .480 ——
10.80 3.94 8.38 Dia. 12.19
70 Ohm Series .216 [5.49] -32 UNEF-2A Thread
131-0202-0002 1 .605 .160 .250 .281 .217 .197
15.37 4.06 6.35 Hex. 7.14 5.51 5.00
131-0705-0001 3 .340 .155 .330 ———
8.64 3.94 8.38 Dia.
93 Ohm Series .250 [6.35] -32 UNEF-2A Thread
131-0303-0002 3 .340 .155 .330 ———
8.64 3.94 8.38 Dia.
131-0304-0001 4 .425 .155 .330 .480 ——
10.80 3.94 8.38 Dia. 12.19
131-0904-0001 1.605 .160 .312 .312 .251 .232
15.37 4.06 7.92 Hex. 7.92 6.38 5.89
Ø .037
[0.94]Typ.
AB
C
Ø .037
[0.94]Typ.
AB
C
D
.245
[6.22]
.200
±.005
[5.08
±0.13
]
Typ.
Ø.055
[1.40] Min.
Typ.
.100
±.005
[2.54
±0.13
]
Typ.
Fig. 3 Fig. 4 Mounting Pattern
for Fig. 3 & 4
A
Max.
Panel
B
D
Hex.
Solder Lug Mounting Nut
Turret
C
A
Max.
Panel
B
D
Hex.
Solder Lug Mounting Nut
Solder
Pot
C
F
Min.
Ø E Min.
Fig. 1 Fig. 2 Mounting Hole
for Fig. 1 & 2
Sealing
Sleeve
Middle
Sleeve
Inner
Sleeve
Cable
Insulator
Pin
Contact
Socket
Contact Housing
Insulator
Housing
Insulator Housing Sub-assembly
Housing
Plug
Jack
Gasket
Table 1. Contact Crimp Tools
MICRODOT Part No. Manufacturers Part No.
010-0065-0000 Astro Tool A-810-3
Table 2. Housing Crimp Tools
MICRODOT Thomas & Betts Max. Cable
PartNo. Part No. Diameter
010-0081-0000 WT-400 .088 [2.24]
010-0082-0000 WT-402 .110 [2.79]
010-0083-0000 WT-406 .155 [3.94]
Gold Plated Crimp Style Coaxial Connectors — Screw-On Series (Continued)
Coaxial Connectors
117
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
LEPRA/CON Ultra-Miniature Connectors
Performance Data Summary
For LEPRA/CON Connectors Mechanical
Captive Contacts —Terminated con-
nector contacts captivated from move-
ment in both directions.
Cable Retention —
10 lb. min. when properly assembled to
RG196/U and RG178/U cable.
Recommended Coupling Torque
(Threaded Interface) —
24 inch/ounces max.
Recommended Receptacle
Mounting Torque (All Series) —
24 inch/ounces max.
Typical Cable Acceptance
Dimensions —Inner conductor: .012
[0.31] nom. Dielectric: .039 [0.99] max.
Shield: .059 [1.50] max. Jacket: .081
[2.06] max.
Contact Protection (Unmated) —
Twist pin contact protected from damage
by insulator. Tube socket protected by
connector housing.
Assembly Methods
Straight Plugs & Jacks —Cable
Inner Conductor: Crimped to contact.
Cable Shield: Crimped under housing.
Right-Angle Plugs —Cable Inner
Conductor: Soldered to contact. Cable
Shield: Crimped under housing.
Environmental
Temperature Range (Continuous
Service) —-85°F to +392°F
[-65°C to +200°C].
Vibration1,2 —MIL-STD-202, Method
204, Test Condition B (15 G peaks). No
physical damage or electrical disconti-
nuities in excess of 1 microsecond.
Shock1,2 —MIL-STD-202, Method
213, Test Condition H. No physical dam-
age or electrical discontinuity after
shock.
Thermal Shock —MIL-STD-202,
Method 107, Test Condition C.
Moisture Resistance1—MIL-STD-
202, Method 106.
Salt Spray1—MIL-STD-202, Method
101, Test Condition B (48 hours).
Electrical
Impedance —Designed to be com-
patible with 50 Ohm coaxial cable
RG178/U.
Dielectric Withstanding Voltage —
450 volts RMS at sea level, 250 volts
RMS at 50,000 ft [15,240 m], 150 volts
RMS at 70,000 ft. [21,336 m]
Contact Resistance — 8 milliohms
max., D.C.
Contact Capacity — 3 amps, D.C.
Insulation Resistance —104
Megohms min. @ 500 volts D.C.
Voltage Standing Wave Ratio3
(VSWR) —Typical 50 Ohm Series, 1.2
Maximum to 2 GHz.
Materials
Housing, Nut, Ferrule —Brass per
ASTM-B-16.
Insulator —TEFLON per
ASTM-D-1710.
Pin & Socket Contact —Copper
Alloy.
Crimp Sleeve —Copper Alloy.
Lockwasher —#425 Bronze Alloy.
Plating
Contacts, Housing, Nut, Ferrule,
Crimp Sleeve, Lockwasher —
Gold per MIL-G-45204, Type II, Grade
C, Class 1.
Notes:
1Screw-On Series, threaded interface.
2Tyco Electronics recommends the
use of safety wired connectors in
vibration and shock environments.
See individual specifications with
wire holes.
3VSWR is a system specification.
Where performance is critical,
purchase Tyco Electronics cable
assemblies with Screw-On connec-
tors (See page 129) and specify
VSWR testing and mating
connector part numbers.
Coaxial Connectors
118 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
.580
[14.73]
.125
[3.18]
.015
[0.38]
-44UNF-2B
(Modified)
3 Places
(142-0000-0003 Only)
Dia.
Featuring Twist Pin,
Pin and Socket Contacts,
Standard Interface
MICRODOT twist pin, pin
and socket contacts are
used in LEPRA/CON con-
nectors. Twist pin contact
pins are produced from
beryllium copper material
with a gold-plated finish and
constructed with helically-
wound stress free cable of
spring copper around a
highly conductive soft cop-
per core, terminated with a
hemispherical weld. Twist pin
conta ct s contain seven self-
wiping spring surfaces,
designed for consistent
continuity and very low
noise level. Twist pin con-
tacts are self-aligning
because of the contact-
engaging-end configuration.
The sockets are a closed
entry tubular-type contact,
made of gold-plated
copper alloy.
The connectors are
designed to be used with
coaxial cables RG196/U
and RG178/U.
The connectors are
designed with the contacts
completely protected for
reliability. The use of twist
pin contacts makes the
connectors very rugged for
their size.
Straight Plugs1
.395
[10.03]
.380
[9.65] .125-44UNF-2B
[3.18] (Modified)
.015
[0.38]
3 Places
(142-0002-0003 Only)
Solder Center
Conductor to Contact
Dia.
Right-Angle Plug1
.156
[3.96]
Hex. Stk.
.580
[14.73]
.270
[6.86]
.125-44UNF-2A
[3.18] (Modified)
Jack1
Part Number 141-0000-0001
Instruction Sheet Number 408-08510
Former MICRODOT I.S. Number RF-ASMB-12
.156
[3.96]
Hex. Stk.
.580
[14.73]
.270
[6.86] .093
[2.36]
.125-44UNF-2A
[3.18] (Modified)
Max.
Panel
Bulkhead Jack1
Part Number 141-0001-0001
Instruction Sheet Number 408-08510
Former MICRODOT I.S. Number RF-ASMB-12
Part No. Nut Style
142-0000-0001 .156 [3.96] Hex.
142-0000-0002 .160 [4.06] Dia. Knurl
142-0000-0003 .156 [3.96] Hex. w/ Safety Wire Holes
Assembly instructions: RF-ASMB-12
Part No. Nut Style
142-0002-0001 .156 [3.96] Hex.
142-0002-0002 .160 [4.06] Dia. Knurl
142-0002-0003 .156 [3.96] Hex. w/ Safety Wire Holes
Assembly instructions: RF-ASMB-13
.156
[3.96]
2 Plcs.
.425
[10.80]
.093
[2.36]
.125-44UNF-2A
[3.18] (Modified)
.140
[3.56]
.022
[0.56] Solder Pot
I.D.
Max.
Panel
Turret
Front Mount Receptacle1
.156
[3.96] 2 Plcs.
.425
[10.80]
.125-44UNF-2B
[3.18] (Modified)
.022
[0.56]
.022
[0.56]
.093
[2.36]
.260
[6.60] Max.
Panel
Solder Pot I.D.
Turret I.D.
Rear Mount Receptacle1
PartNo. Contact Tail
141-0002-0001 Turret
141-0002-0002 Solder Pot
PartNo. Contact Tail
141-0003-0001 Turret
141-0003-0002 Solder Pot
1Mounting hole pattern and assembly tools shown on page 123.
LEPRA/CON Ultra-Miniature Connectors — Screw-On Series
Coaxial Connectors
119
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
LEPRA/CON Ultra-Miniature Connectors — Screw-On Series (Continued)
Featuring Twist Pin,
Pin and Socket Contacts,
Standard Interface (Continued)
.172
[4.37]
.026
[.660]
.225
[5.72]
.125-44UNF-2A
[3.18] (Modified)
Dia.–Typ.
Straight Printed Circuit Receptacle1
Part No. 141-0004-0001
.120
[3.05]
.172
[4.37]
.026
[6.60]
.370
[9.40]
.385
[9.78]
Dia.
5 Plcs.
.125-44UNF-2A
[3.18] (Modified)Thd.
Cavity Potted
With Epoxy
Shipping Fixture
Right-Angle Printed Circuit Receptacle1
(Small Mounting Pattern)
Part Number 141-0019-0001
.120
[3.05]
.172
[4.37]
.026
[6.60]
.370
[9.40]
.385
[9.78]
Dia.
Typ.
.125-44UNF-2A
[3.18] (Modified)Thd.
Cavity Potted
With Epoxy
Right-Angle Printed Circuit Receptacle1
(Standard Mounting Pattern)
Part Number 141-0010-0001
.125-44 UNF-2A
[3.18] (Modified)
.156
[3.96]
Hex.
.490
[12.45]
.115
[2.92]
.093
[2.36]
.275
[6.99] Max.
Panel
.156
[3.96]
.285
[7.24]
Sq.
Cavity Filled
With Epoxy
Right-Angle Receptacle1
Part Number 141-0013-0001
.250
[6.35]Hex.
2 Plcs.
.080
[2.03]
.205
[5.21] .125
[3.18]
.545
[13.84]
.217
[5.51]
.202
[5.13]
Min.
Max.
Panel
.216-32 UNF
[5.49] Thd.
-UNF44-2A Thd.
(Modified)
Both Ends
Feed-ThruBulkhead Adapter
(Both Ends are Receptacle Interface)
PartNumber 143-0005-0001
1Mounting hole pattern and assembly tools shown on page 123.
Straight Plug
Coaxial Connectors
120 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
The MICRODOT LEPRA/CON
coaxial connector series is
now offered with a unique
locking interface feature.
This new coupling design
permits the user to lock the
coaxial plug, when mated to
its receptacle, preventing
any axial rotation. This
adaptation is especially
popular on connector instal-
lations requiring straight or
90° cable terminations firm-
ly held in a fixed position.
The locking interface is
especially suited for
telecommunications and
instrumentation applications.
.580
[14.73]
.015
[0.38] Dia. 3 Plcs.
(142-0010-0003 Only)
.125
[3.18]
-44UNF-2B
(Modified)
Straight Plug1
.395
[10.03]
Solder Center
Conductor to Contact .015
[0.38] Dia. 3 Plcs. Ref.
(142-005-0003 Only)
.380
[9.65]
.125
[3.18]
-44UNF-2B
(Modified)
Right-Angle Plug1
PartNo. Nut Style
142-0010-0001 .156 [3.96] Hex.
142-0010-0002 .160 [4.06] Dia. Knurl
142-0010-0003 .156 [3.96] Hex. w/ Safety Wire Holes
Assembly instructions: RF-ASMB-12, 142-0010-0001
PartNo. Nut Style
142-0005-0001 .156 [3.96] Hex.
142-0005-0002 .160 [4.06] Dia. Knurl
142-0005-0003 .156 [3.96] Hex. w/ Safety Wire Holes
Assembly instructions: RF-ASMB-13, 142-0005-0001
1Assembly tools; page 123.
Featuring Twist Pin,
Pin and Socket Contacts
with Locking Interface
LEPRA/CON Ultra-Miniature Connectors — Screw-On Series (Continued)
Coaxial Connectors
121
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
LEPRA/CON Ultra-Miniature Connectors — Screw-On Series (Continued)
Featuring Twist Pin,
Pin and Socket Contacts
with Locking Interface
(Continued)
.590
[14.99]
.156
[3.96] .125
[3.18]
-44UNF-2A
(Modified)
Straight Jack1
Part Number 141-0017-0001
Instruction Sheet Number 408-08510
Former MICRODOT I.S. Number RF-ASMB-12
.590
[14.99]
.285
[7.24] .093
[2.36] Max.
Panel
2 Plcs.
.156
[3.96] .125
[3.18]
-44UNF-2A
(Modified)
Bulkhead Jack1
Part Number 141-0014-0001
Instruction Sheet Number 408-08510
Former MICRODOT I.S. Number RF-ASMB-12
.240
[6.10] .172
[4.37]
.026
[0.66] Dia.
Typ.
.125
[3.18]
-44UNF-2A
(Modified)
Straight Printed Circuit Receptacle1
Part Number 141-0015-0001
.120
[3.05]
.026
[.660] Dia.
5 Plcs.
Cavity Potted
With Epoxy
.385
[9.78]
.172
[6.77]
.385
[9.78]
.125
[3.18]
-44UNF-2A
(Modified)
Shipping Fixture
Right-Angle Printed Circuit Receptacle1
Part Number 141-0023-0001
.440
[11.18]
.155
[3.94]
.022
[.559] Solder Pot
I.D.
Turret
.093
[2.36] Max.
Panel
2 Plcs.
.156
[3.96]
.125
[3.18]
-44UNF-2A
(Modified)
Front Mount Receptacle1
.300
[7.62]
.490
[12.45]
.275
[6.99]
.115
[2.92]
.156
[3.96]Sq.
Cavity Filled
With Epoxy
.093
[2.36] Max.
Panel
.156
[3.96]
.125
[3.18]
-44UNF-2A
(Modified)
Right-Angle Receptacle1
PartNumber 141-0020-0001
.440
[11.18]
.275
[6.99]
.022
[.559] Solder Pot
I.D.
Turret
.093
[2.36] Max.
Panel
Hex.
2 Plcs.
.156
[3.96]
.125
[3.18]
-44UNF-2A Thd.
(Modified)
Rear Mount Receptacle w/ Locking Interface1
1Mounting hole pattern and assembly tools shown on page 123.
Part No. Contact Tail
141-0012-0001 Solder Pot
141-0012-0002 Turret
Part No. Contact Tail
141-0011-0001 Turret
141-0011-0002 Solder Pot
Coaxial Connectors
122 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
.125
[3.18] Dia.
.610
[15.49]
Straight Plug1
Part Number 142-1000-0001
Instruction Sheet Number 408-08512
Former MICRODOT I.S. Number RF-ASMB-15
.125
[3.18]
.440
[11.18]
.380
[9.65]
Right-Angle Plug1
PartNumber 142-1002-0001
Instruction Sheet Number 408-08513
Former MICRODOT I.S. Number RF-ASMB-16
.250
[6.35] Hex.
2 Plcs.
.140
[3.56] Max.
Panel
.190
[4.83]-32UNF-2 Thd.
Ø.191
[4.85] Min.
.490
[12.45]
.445
[11.30]
.265
[6.73]
Right-Angle Bulkhead Mount Plug1
Part Number 142-1021-0001
Instruction Sheet Number 408-08519
Former MICRODOT I.S. Number RF-ASMB-76
.093
[2.36] Max.
Panel
.156
[3.96] Hex.
2 Plcs.
.640
[16.26]
.335
[8.51]
.125
[3.18]
-44UNF-2A
(Modified)
Straight Bulkhead Jack1
Part Number 141-1001-0001
Instruction Sheet Number 408-08512
Former MICRODOT I.S. Number RF-ASMB-15
.125
[3.18] Dia.
.570
[3.99]
Straight Jack1
PartNumber 141-1000-0001
Instruction Sheet Number 408-08512
Former MICRODOT I.S. Number RF-ASMB-15
.093
[2.36]
.022
[0.56]
Max.
Panel
Hex.
2 Plcs.
Turret
Solder Pot
I.D.
.156
[3.96]
.495
[12.57]
.220
[5.59]
.125
[3.18]
-44UNF-2
(Modified)
Front Mount Receptacle1
Featuring Twist Pin,
Pin and Socket Contacts LEPRA/CON Slide-On
Connectors offer a conven-
ient mating style along with
Ultra-miniature size. Inner
contacts are twist pin tubular
sockets in plugs and twist
pin contacts for jacks
and receptacles. Positive
housing contact is provided
by a three finger contact in
the plug housing.
PartNo. Contact Tail
141-1002-0001 Turret
141-1002-0002 Solder Pot
1Mounting hole and assembly tools shown on page 123.
Mounting
Hole
LEPRA/CON Ultra-Miniature Connectors — Slide-On Series
Coaxial Connectors
123
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
LEPRA/CON Ultra-Miniature Connectors — Slide-On Series (Continued)
.022
[.559] Solder Pot
I.D.
.093
[2.36] Max.
Panel
Turret
.495
[12.57]
.335
[8.51]
.156
[3.96]
Hex. 2 Plcs.
.125
[3.18]
-44UNF-2A
(Modified)
Rear Mount Receptacle
Cavity Filled
With Epoxy
Sq. .385
[9.78]
.490
[12.45]
.275
[6.99]
.115
[2.92]
.156
[3.96] Hex.
.156
[3.96]
Right-Angle Receptacle
Mounting Hole Shown Below
Part Number 141-1012-0001
.172
[4.37]
.260
[6.60]
.026
[0.66] Dia. Typ
Straight Printed Circuit Receptacle
Mounting Hole Pattern Shown Below
Part Number 141-1004-0001
.114
[2.90] Min.
.126
[3.20]
Min.
Bulkhead Receptacle Mounting Hole
Typ.
.046
[1.17] Dia. Min.
5 Holes
.195–.205
[4.95–5.21]
Typ.
.095–.105
[2.41–2.67]
Standard Pattern
Printed Circuit Receptacle Mounting Hole Pattern
Typ.
.045–.055
[1.14–1.40]
.046
[1.17] Dia.Min.
5 Holes
Typ.
.095–.105
[2.41–2.67]
Small Pattern
Connectors 141-0019-0001
and 141-0023-0001 Only
.097
[2.46]
.026
[0.66] Dia. Typ.
Dia.
.425
[10.80]
.385
[9.78]
.172
[4.37]
.120
[3.05]
Right-Angle Printed Circuit Receptacle
Mounting Hole Pattern Shown Below
Part Number 141-1005-0001
Featuring Twist Pin,
Pin and Socket Contacts
(Continued)
LEPRA/CON Connector Assembly Tools
Part No. Contact Tail
141-1003-0001 Turret
141-1003-0002 Solder Pot
Mounting Hole shown below.
MICRODOT PartNo. Thomas & Betts Part No.
010-0132-0000 WT-419
Housing Crimp Tool Connector Contact Crimp No. Astro Tool Part No.
Straight 010-0150-0000 A-826-1
Connector Only
141-1001-0001 010-0161-0000 827
Contact Crimp Tool
Coaxial Connectors
124 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
.900
[22.86]
End B End A
.125-44UNF-2A
[3.18] (Modified)
End “A” is BNC Plug
Part Number 143-0001-0001 Part Number 143-0003-0001
End “B” is MICRODOT
Screw-On Plug
.950
[24.13]
End BEnd A
.125-44UNF-2B
[3.18] (Modified)
.785
[19.94]
.125-44UNF-2A
[3.18] (Modified)
End B End A
BNC / LEPRA/CON
Connector Adapters
End “A” is BNC Plug End “B” is MICRODOT Screw-On Plug
with Locking Interface
End “A” is BNC PlugEnd “B” is Screw-On Receptacle
.850
[21.59]
End B
End A
.125-44UNF-2A
[3.18] (Modified)
End “A” is BNC Receptacle End “B” is MICRODOT
Screw-On Receptacle
.865
[21.97]
End B
End A
.125-44UNF-2A
[3.18] (Modified)
.835
[21.21]
End BEnd A
End “A” is BNC Receptacle End “B” is MICRODOT Screw-On
Receptacle with Locking Interface
End “A” is BNC Plug End “B” is MICRODOT
Slide-On Plug
Part Number 143-0029-0001 Part Number 143-0032-0001
PartNumber 143-0002-0001 Part Number 143-1000-0001
LEPRA/CON Ultra-Miniature Connectors (Continued)
Coaxial Connectors
125
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
LEPRA/CON Ultra-Miniature Connectors (Continued)
.800
[20.32]
End B
End A
.125-44UNF-2A
[3.18] (Modified)
.965
[24.51]
.125-44UNF-2B
[3.18] (Modified)
End BEnd A
1.015
[25.78]
.125-44UNF-2B
[3.18] (Modified)
End BEnd A
End “A” is BNC Plug End “B” is MICRODOT Receptacle with
Locking Interface
End “A” is BNC Receptacle End “B” is MICRODOT
Screw-On Plug
End “A” is BNC Receptacle End “B” is MICRODOT Screw-On Plug
with Locking Interface
.900
[22.86]
End B
End A
.900
[22.86]
End BEnd A
.965
[24.51]
End BEnd A
End “A” is BNC Plug End “B” is MICRODOT
Slide-On Receptacle
End “A” is BNC Receptacle End “B” is MICRODOT
Slide-On Plug
End “A” is BNC Receptacle End “B” is MICRODOT
Slide-On Receptacle
Part Number 143-0031-0001 Part Number 143-1002-0001
Part Number 143-0004-0001 Part Number 143-1001-0001
PartNumber 143-0030-0001 PartNumber 143-1003-0001
BNC / LEPRA/CON
Connector Adapters
(Continued)
Coaxial Connectors
126 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Product Facts
nSimple coupling design
eliminates the need for
tools and saves assembly
time
nPositive locking mechanism
provides its own fail-safe
features
nInspection of the mated con-
nector is fast, simple and
effective
nPush-Pull design allows
higher panel density
nQuick-connect and discon-
nect features
Performance Data Summary
For Snap-Lock Connectors Electrical
Impedance —Designed to be com-
patible with 50 Ohm coaxial cables
(Dual Shield RG 196).
Dielectric Withstanding Voltage —
450 volts RMS at sea level (Operating).
Contact Resistance —8milliohms
max. at 3 amps. Average resistance: 4
milliohms
Insulation Resistance —104
megohms min.
Voltage Standing Wave Ratio
(VSWR) —3.4 max., 1.3 min. to 12 GHz.
Environmental
Temperature Range —
-85°F to +257°F [-65°C to +125°C].
Vibration —MIL-STD-202, Method
204, Test condition D. No change in
electrical discontinuity in excess of 1
microsecond.
Shock — MIL-STD-202, Method 213A,
Test Condition C. No electrical disconti-
nuity or evidence of physical damage.
Mechanical
Cable Acceptance Dimensions —
Center conductor: .012 [0.31] nom.
Dielectric: .040 [1.02] max. Shield: .080
[2.03] max. Jacket: .090 [2.29] max..
All-Crimp Assembly —
Center contacts and shield are crimped
individually.
Durability —500 mating cycles.
Materials
Body and Body Components —
Brass per QQ-B-626 Comp 360.
Contact Material —Copper Alloy.
Crimp Sleeves —Leaded Copper.
Insulators —TEFLON per
ASTM-D-1710.
Lockwashers —#425 Bronze Alloy.
Plating — Gold per MIL-G-45204, Type
II, Grade C, Class 1.
.719
[18.26]
.250
[6.35]
Straight Plug
PartNumber 144-0001-0001
.093
[2.36] Max.
Panel
8-32 UNC-2A (Modified)
.750
[19.05] .219
[5.56]
.312
[7.92]
.406
[10.31]
Bulkhead Jack, Rear Mount
PartNumber 145-0001-0001
.093
[2.36]
8-32 UNC-2A (Modified)
Max.
Panel
.219
[5.56]
.312
[7.92]
.625
[15.88]
.406
[10.31]
Receptacle, Rear Mount
Part Number 145-0003-0001
.093
[2.36] .285
[7.24]
8-32 UNC-2A (Modified)
Max.
Panel
.219
[5.56]
.312
[7.92]
.625
[15.88]
Receptacle, Front Mount
Part Number 145-0002-0001
.165–.168
[4.19–4.27]
.146–.149
[3.71–3.78]
“D” Hole Dimensions
For Panel Mounting
Connector/Cable Assembly
Crimp Tools — Center Contact
and Shield
Tool Part No.
SKT & 010-1004-0000
Pin Crimp
Housing 010-0081-0000
Crimp
LEPRA/CON Ultra-Miniature Connectors — Snap-Lock Series
Coaxial Connectors
127
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Cable Assemblies
The experience
Tyco Electronics has gained
through years of pioneering
efforts in the development
of MICRODOT miniaturized
cable and connectors is
available to customers in
the assembly of complex
cable/connector combina-
tions. This experience offers
the customer low cost and
no tooling charges, preci-
sion construction, thorough
inspection and prompt
delivery. The capability also
makes it possible for the
designer to specify a com-
plete assembly or harness
with the understanding that
Tyco Electronics will deliver
acustom fabrication equal
in quality to the MICRODOT
components it contains.
These assemblies are
made to the customer’s
specifications or are
designed by the Company’s
experienced engineers to fit
particular requirements.
Special features are light
weight, reduced size, high
operating temperatures and
comprehensive layouts.
1. Specify MICRODOT part numbers
A. Connector,one end
B. Connector, other end
C. Cable
2. Specify normal length
A. Overall length
B. Or length between connectors
3. Specify length tolerance
A. Standardtolerance
Assembly Length Tolerance
0thru 12-1/2" ±1/8"
Over 12-1/2" thru 1000" ±1% rounded to
nearest 1/4"
Over 1000" ±1% rounded to
nearest 1"
B. Special tolerance
Tolerances as close as ±.5% are
available for most cable assemblies
at a premium rate. Consult
Tyco Electronics for details.
4. Specify cable strip (Applies to cable
assemblies with only one connector)
A. Not stripped
B. Standardstrip
C. Special strip - specify style
Example:
Connector:
142-1000-0001 one end
142-1002-0001 other end
Length:
36" overall, standardtolerance
Capability
How To Order
Jacks Plugs
O. A. L.
Jacks Right Angles
O. A. L.
Right Angles Right Angles
O. A. L.
Jacks Plugs
Cable Length
Between
Connectors
Cable Length
Between
Connectors
Jacks Right Angles
Cable Length
Between
Connectors
Right Angles Right Angles
1
⁄
2
"
1
⁄
2
"
1
⁄
2
"
StandardStrip
Coaxial Connectors
128 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Mating Interface Chart
Plugs Jacks and Receptacles
Series Description Page Series Description Page
S50 Standard 94, 95 S50 Standard 96, 97
50 Ohm Gold Plated Crimp Style 113, 114 50 Ohm Gold Plated Crimp Style 115, 116
50 Ohm Cap 109 50 Ohm Feed Thru Adapter 110, 111
S70 Standard 94, 95 S70 Standard 96, 97
70Ohm Gold Plated Crimp Style 113, 114 70 Ohm Gold Plated Crimp Style 115, 116
70Ohm Cap 109 70 Ohm Feed Thru Adapter 110, 111
S93 Standard 94, 95 S93 Standard 96, 98
93 Ohm Gold Plated Crimp Style 114 93 Ohm Gold Plated Crimp Style 115, 116
93 Ohm Cap 109 93 Ohm Feed Thru Adapter 110, 111
SOS 50 Standard 99, 100 SOS 50 Standard 99, 102
SOS 70 Standard 100, 101 SOS 70 Standard 101, 102
SOS 93 Standard 100, 101 SOS 93 Standard 101, 102
QC 50 Standard 103, 104 QC 50 Standard 103
QC 70 Standard 104 QC 70 Standard 103
QC 93 Standard 104 QC 93 Standard 103
Screw-On Twinax 106 Screw-On Twinax 106
Slide-On Twinax 106 Slide-On Twinax 106
Screw-On Triax 107 Screw-On Triax 107
Screw-On LEPRA/CON Connector 118 Screw-On LEPRA/CON Connector 118, 119
Screw-On LEPRA/CON Connector 120 Screw-On LEPRA/CON Connector 121
Interlocking Interface Interlocking Interface
Slide-On LEPRA/CON Connector 122 Slide-On LEPRA/CON Connector 122, 123
Cable Assemblies (Continued)
Coaxial Connectors
129
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Cable Acceptance Dimensions
Standard Connectors
Screw-On Series
Straight Plugs —Page 94
Connector Max. Max. Max. Max.
Part No. Jacket Shield Dielectric Inner
Conductor
S-50
032-0021-0001 .087 .061 .050 .013
2.21 1.55 1.27 .330
032-0023-0001 .087 .061 .041 .015
2.21 1.55 1.04 .381
032-0025-0001 .093 .068 .050 .013
2.36 1.73 1.27 .330
032-0033-0001 .093 .077 .047 .015
2.36 1.96 1.00 .381
032-0097-0001 .087 .061 .050 .015
2.21 1.55 1.27 .381
032-0098-0001 .087 .061 .041 .015
2.21 1.55 1.04 .381
032-0155-0001 .088 .061 .041 .015
2.24 1.55 1.04 .381
032-0156-0001 .088 .061 .041 .015
2.24 1.55 1.04 .381
052-0213-0001 .087 .061 .050 .013
2.21 1.55 1.27 .330
052-0235-0001 .087 .061 .041 .015
2.21 1.55 1.04 .381
052-0235-0003 .087 .061 .041 .015
2.21 1.55 1.04 .381
052-0370-0001 .093 .068 .041 .015
2.36 1.73 1.04 .381
052-0542-0001 .087 .061 .041 .015
2.21 1.55 1.04 .381
S-70
032-0010-0001 .093 .075 .061 .013
2.36 1.91 1.55 .330
032-0022-0001 .093 .075 .059 .015
2.36 1.91 1.50 .381
032-0067-0001 .108 .079 .059 .015
2.74 2.01 1.50 .381
032-0078-0001 .108 .079 .061 .013
2.74 2.01 1.55 .330
032-0222-0001 .093 .075 .059 .015
2.36 1.91 1.50 .381
052-0092-0001 .093 .075 .059 .015
2.36 1.91 1.50 .381
S-93
032-0011-0001 .134 .118 .100 .013
3.40 2.99 2.54 .330
032-0017-0001 .134 .118 .100 .015
3.40 2.99 2.54 .381
032-0066-0001 .154 .118 .101 .015
3.91 2.99 2.67 .381
032-0071-0001 .134 .118 .097 .031
3.40 2.99 2.446 .787
032-0092-0001 .155 .125 .107 .015
3.94 3.18 2.72 .381
032-0099-0001 .134 .118 .100 .015
3.40 2.99 2.54 .381
052-0200-0001 .134 .118 .100 .015
3.40 2.99 2.54 .381
Coaxial Connectors
130 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Screw-On Series (Continued)
Right-Angle Plugs —Page 95 Connector Max. Max. Max. Nom.
Part No. Jacket Shield Dielectric Inner
Conductor
S-50
032-0015-0001 .092 .060 Any .012
2.34 1.52 .305
052-0204-0001 .092 .060 Any .012
2.34 1.52 .305
052-0215-0001 .092 .060 Any .012
2.34 1.52 .305
052-0337-0001 .111 .074 Any .012
2.81 1.88 .305
S-70
032-0013-0001 .111 .074 Any .012
2.81 1.88 .305
052-0299-0001 .111 .074 Any .012
2.81 1.88 .305
052-0379-0001 .111 .074 Any .012
2.81 1.88 .305
S-93
032-0014-0001 .134 .123 Any .012
3.40 3.12 .305
032-0068-0001 .155 .118 Any .012
3.94 2.99 .305
032-0153-0001 .155 .118 Any .012
3.94 2.99 .305
052-0207-0001 .134 .123 Any .012
3.40 3.12 .305
052-0298-0001 .134 .123 Any .012
3.40 3.12 .305
052-0304-0022 .155 .118 Any .012
3.94 2.99 .305
Jacks — Page 96 Connector Max. Max. Max. Max.
PartNo. Jacket Shield Dielectric Inner
Conductor
S-50
031-0033-0001 .088 .061 .041 .021
2.24 1.55 1.04 .533
031-0034-0001 .087 .061 .041 .021
2.21 1.55 1.04 .533
051-0467-0001 .079 .061 .041 .021
2.01 1.55 1.04 .533
S-70
031-0036-0001 .093 .075 .059 .021
2.36 1.91 1.50 .533
031-0048-0001 .093 .075 .059 .021
2.36 1.91 1.50 .533
031-0090-0001 .109 .079 .059 .021
2.77 2.01 1.50 .533
S-93
031-0032-0001 .134 .118 .100 .021
3.40 2.99 2.54 .533
031-0037-0001 .134 .118 .100 .021
3.40 2.99 2.54 .533
031-0088-0001 .154 .118 .101 .021
3.91 2.99 2.57 .533
031-0089-0001 .154 .118 .101 .021
3.91 2.99 2.57 .533
Cable Acceptance Dimensions(Continued)
Coaxial Connectors
131
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Cable Acceptance Dimensions (Continued)
Slide-On Series
Straight Plugs —Page 100 Connector Max. Max. Max. Max.
Part No. Jacket Shield Dielectric Inner
Conductor
SOS-50
032-0055-0001 .088 .058 .041 .015
2.24 1.47 1.04 .381
032-0056-0001 .088 .058 .041 .015
2.24 1.47 1.04 .381
SOS-70
032-0060-0001 .093 .075 .059 .015
2.36 1.71 1.50 .381
032-0061-0001 .093 .075 .059 .015
2.36 1.71 1.50 .381
032-0087-0001 .108 .079 .059 .015
2.74 2.01 1.50 .381
SOS-93
032-0058-0001 .134 .118 .100 .015
3.40 2.99 2.54 .381
032-0077-0001 .134 .118 .100 .015
3.40 2.99 2.54 .381
032-0084-0001 .154 .118 .101 .015
3.91 2.99 2.57 .381
Right-Angle Plugs —Page 101 Connector Max. Max. Max. Nom.
Part No. Jacket Shield Dielectric Inner
Conductor
SOS-50
032-0063-0001 .092 .060 Any .012
2.34 1.52 .305
SOS-70
032-0062-0001 .111 .074 Any .012
2.82 1.88 .305
SOS-93
032-0059-0001 .134 .123 Any .012
3.40 3.12 .305
032-0083-0001 .155 .118 Any .012
3.94 2.99 .305
Jacks —Page 101 Connector Max. Max. Max. Max.
Part No. Jacket Shield Dielectric Inner
Conductor
SOS-50
031-0053-0001 .088 .061 .041 .021
2.24 1.55 1.04 .533
031-0054-0001 .088 .061 .041 .021
2.24 1.55 1.04 .533
SOS-70
031-0095-0001 .108 .079 .059 .021
2.74 2.01 1.50 .533
SOS-93
031-0063-0001 .134 .118 .100 .021
3.40 2.99 2.54 .533
031-0064-0001 .134 .118 .100 .021
3.40 2.99 2.54 .533
031-0093-0001 .154 .118 .101 .021
3.91 2.99 2.57 .533
031-0094-0001 .154 .118 .101 .021
3.91 2.99 2.57 .533
Coaxial Connectors
132 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Quick-Connect Series
Straight Plugs —Page 104 Connector Max. Max. Max. Max.
Part No. Jacket Shield Dielectric Inner
Conductor
QC-50
032-0002-0001 .093 .058 Any .013
2.36 1.47 .330
032-0030-0001 .093 .058 .041 .015
2.36 1.47 1.04 .381
QC-70
032-0016-0001 .093 .075 .061 .013
2.36 1.91 1.55 .330
032-0031-0001 .093 .075 .059 .015
2.36 1.71 1.50 .381
032-0079-0001 .108 .079 .059 .015
2.74 2.01 1.50 .381
QC-93
032-0012-0001 .134 .118 .100 .013
3.40 2.99 2.54 .330
032-0032-0001 .134 .118 .100 .015
3.40 2.99 2.54 .381
032-0072-0001 .154 .118 .101 .015
3.91 2.99 2.57 .381
Right-Angle Plugs —Page 104 Connector Max. Max. Max. Nom.
PartNo. Jacket Shield Dielectric Inner
Conductor
QC-50
032-0026-0001 .092 .060 Any .012
2.34 1.52 .305
QC-70
032-0027-0001 .111 .074 Any .012
2.82 1.88 .305
QC-93
032-0020-0001 .134 .123 Any .012
5.40 3.12 .305
052-0228-0001 .155 .118 Any .012
3.94 2.99 .305
Jacks —Page 105 Connector Max. Max. Max. Max.
Part No. Jacket Shield Dielectric Inner
Conductor
QC-50
031-0038-0001 .093 .061 .041 .021
2.36 1.55 1.04 .533
QC-93
031-0040-0001 .134 .118 .100 .021
3.40 2.99 2.54 .533
Twinax
Plugs —Page 106 Connector Max. Max. Max. Max.
Part No. Jacket Shield Dielectric Inner
Conductor
032-0088-0001 .167 .142 .061 .014
4.24 3.60 1.55 .356
032-0093-0001 .123 .092 .042 .014
3.12 2.34 1.07 .356
052-0229-0001 .123 .092 .042 .014
3.12 2.34 1.07 .356
052-0324-0001 .167 .142 .061 .014
4.24 3.61 1.55 .356
Jacks —Page 106 Connector Max. Max. Max. Max.
Part No. Jacket Shield Dielectric Inner
Conductor
051-0358-0001 .167 .142 .061 .020
4.24 3.60 1.55 .508
051-0389-0001 .167 .142 .061 .020
4.24 3.61 1.55 .508
Cable Acceptance Dimensions (Continued)
Coaxial Connectors
133
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Cable Acceptance Dimensions (Continued)
Triax
Plugs —Page 107 Connector Max. Max. Max. Max. Max. Max.
Part No. Jacket Outer Outer Inner Inner Inner
Shield Dielectric Shield Dielectric Conductor
052-0130-0001 .124 Single .085 Single .041 .014
3.15 Shield 2.26 Shield 1.04 .356
052-0138-0001 .183 Single .146 .118 .107 .014
4.65 Shield 3.71 2.99 2.72 .356
052-0593-0001 .214 Single .166 .161 .131 .020
5.44 Shield 4.22 4.09 3.33 .508
Gold Plated Crimp Style
Coaxial Connectors
Straight Plugs —Pages 113, 114
Connector Max. Max. Nom.
Part No. Jacket Dielectric Inner Conductor
50 Ohm Series
132-0112-000* .088 .039 .012
2.24 .991 .305
132-0113-000* .088 .039 .012
2.24 .991 .305
132-0114-000* .110 .070 .012
2.79 1.78 .305
132-0115-000* .110 .070 .012
2.79 1.78 .305
132-0509-0002 .116 .070 .012
2.95 1.78 .305
70Ohm Series
132-0200-000* .110.070 .012
2.79 1.78 .305
132-0201-000* .110 .070 .012
2.79 1.78 .305
93 Ohm Series
132-0300-000* .155 .107 .012
3.94 2.72 .305
132-0301-000* .155 .107 .012
3.94 2.72 .305
Right-Angle Plugs —Page 114 Connector Max. Max. Nom.
Part No. Jacket Dielectric Inner Conductor
50 Ohm Series
132-0116-0002 .088 .039 .012
2.24 .991 .305
132-0117-0002 .088 .039 .012
2.24 .991 .305
132-0118-0002 .110 .074 .012
2.79 1.88 .305
132-0119-0002 .110 .074 .012
2.79 1.88 .305
70 Ohm Series
132-0202-0002 .110 .074 .012
2.79 1.88 .305
132-0203-0002 .110 .074 .012
2.79 1.88 .305
93 Ohm Series
132-0302-0002 .155 .107 .012
3.94 2.72 .305
132-0303-0002 .155 .107 .012
3.94 2.72 .305
Coaxial Connectors
134 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Gold Plated Crimp Style
Coaxial Connectors (Continued)
Jacks —Page 115
Connector Max. Max. Nom.
Part No. Jacket Dielectric Inner Conductor
50 Ohm Series
131-0134-0001 .088 .039 .012
2.24 .991 .305
131-0135-0001 .088 .039 .012
2.24 .991 .305
131-0136-0001 .110 .070 .012
2.79 1.78 .305
131-0137-0001 .110 .070 .012
2.79 1.78 .305
70Ohm Series
131-0200-0001 .110 .070 .012
2.79 1.78 .305
131-0201-0001 .110 .070 .012
2.79 1.78 .305
93Ohm Series
131-0300-0001 .155 .107 .012
3.94 2.72 .305
131-0301-0001 .155 .107 .012
3.94 2.72 .305
LEPRA/CON Connectors
All —Pages 118-126 Connector Max. Max. Nom.
PartNo. Jacket Dielectric Inner Conductor
All .081 .040 .012
2.06 1.02 .305
Cable Acceptance Dimensions (Continued)
Coaxial Connectors
135
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial
Connectors
4
Hermetic Connectors
Material and Finish
50 Connector uses 10-32 thread.
70 Connector uses 12-32 thread.
93 Connector uses 1/4-32 thread.
Housing (1) —Cold rolled steel silver
plate.
Gasket (2) —Neoprene or silicone
rubber.
Insulator (3) —TEFLON.
Glass Seal (4)
Center Contact (5) —Nickel Iron
alloy contact with slotted turret type
solder pot (other terminations available).
Service and Performance Data
Temperature Range —
-65°F to 450°F [–54°C to 232°C] .
Electrical —750 VAC working voltage.
Performance —1200 VAC test at
sea level.
Insulation Resistance —5000
megohms at 500 VDC (room temperature).
Shock —100 G’s minimum.
Pressure —100 PSI minimum.
Leak Rate Per Seal —Less than
1.04 x 10-8 cc/sec. (.001 Micron cubic
ft/hr) of 100% helium tested at one
atmosphere pressure differential far
exceeding requirements of MIL-C-26500
and MIL-C-26482.
Plating —Silver unless otherwise
specified.
Bulkhead Solder Mount
A
Ø B
D
XØ C
.281
[7.14]
.125
[3.18]
A
Ø B
ØC
D
.125
[3.18] .25
[6.35]
.438
[11.13]
.438
[11.13]
X
A
Ø B
XY
ØC
DTyp.
.125
[3.18]
PartNo. Fig. A B Dia. C Dia. ±.015 D X* Y*
051-0049-0001 1 .563 .25 .200 .125 S-50 —
14.30 6.35 5.08 3.18
051-0056-0001 1 .563 .313 .251 .125 S-93 —
14.30 7.95 6.38 3.18
053-0228-0001 2 .594 .25 .227 .234 S-50 S-50
15.09 6.35 5.77 5.94
051-0315-0001 3 .656 .25 .195 .063 S-50 —
16.66 6.35 4.95 1.60
*“S” indicates Screw-On Series
Dimensions are subject to change without notice.
Fig. 1 Fig. 2 Fig. 3
Bulkhead Solder Mount,
Panel Insulated
.063
[1.60]
.125
[3.18]
.203
[5.16]
.328
[8.33]
A
Ø C
XY
D
ØB
Ø
A
CB
Y
X
.063
[1.60]
.047
[1.19]
A
Ø B
ØC
D
XY
Glass Seal
Glass Seal
.063
[1.60]
.047
[1.19]
Part No. Fig. A B Dia. C Dia. D X* Y*
051-0232-0001 1 .563 .406 .370 .172 S-50
14.30 10.31 9.40 4.37
053-0227-0001 2 .609 .625 .540 .297 S-50 S-50
15.47 15.88 13.72 7.54
053-0412-0001 2 .609 .625 .540 .297 S-93 S-93
15.47 15.88 13.72 7.54
053-0028-0001 3.609 .625 .540 .297 SOS-50 S-50
15.47 15.88 13.72 7.54
*“S” indicates Screw-On Series; “SOS” indicates Slide-On Series
Dimensions are subject to change without notice.
Fig. 1 Fig. 2 Fig. 3
Coaxial Screw-On,
Slide-On Series
Coaxial Connectors
136 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial Screw-On, Slide-On Series
(Continued)
Microminiature Coaxial
Receptacles
Y
A
X
FE
D
G
B
Hex.
CThd.
.094
[2.38]
M
H
Part No. A B Hex. C Thd. D E F G H M X* Y*
053-0455-0001 .688 .563 5/16-32 .297 .094 .203 .25 .312 .291 S-50 S-50
17.46 14.29 UNEF-2A 7.54 2.38 5.16 6.35 7.92 7.39
053-0636-0001 .922 .625 3/8-32 .344 .078 .203 .438 .375 .347 S-93 S-93
23.42 15.88 UNEF-2A 8.73 1.98 5.16 11.11 9.53 8.81
*“S” indicates Screw-On Series
Dimensions are subject to change without notice.
Solder Mount Slide-On Series
Receptacles
A
X
ED
Ø C ØB
Part No. A B Dia. C Dia. ±.015 D E X*
051-0134-0001 .563 .375 .309 .172 .031 SOS-50, 70, 93
14.29 9.53 7.85 4.37 .794
051-0158-0001 .563 .25 .200 .125 .047 SOS-50, 70, 93
14.29 6.35 5.08 3.18 1.19
*“SOS” indicates Slide-On Series
Dimensions are subject to change without notice.
Mounting Hole
AD
E
F
B
Hex.
CThd.
.094
[2.38]
X
H
Mounting Hole
Single Hole Mount
Receptacles
Part No. A B Hex. C Thd. D E F H X*
051-0249-0001 .563 .375 12-32 .078 .109 .234 .218 S-50
14.29 9.53 UNEF-2A 1.98 2.78 5.95 5.54
051-0154-0001 .656 .625 3/8-32 .156 .078 .203 .375 S-93
16.67 15.88 UNEF-2A 3.97 1.98 5.16 9.53
*“S” indicates Screw-On Series
Dimensions are subject to change without notice.
Hermetic Connectors (Continued)
NANONICS Connectors
Table of Contents
137
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Nano-Miniature Connectors Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Nano-Miniature Connectors Technical and Performance Data . . . . . . . . . . . . . . . . . 140
DUALOBE Rectangular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141-178
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Wired Connectors
Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Part Numbering Guideline for Wired Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Jumper Assemblies
Single Connectors ................................................145, 146
Two Row Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147, 148
PartNumbering Guideline for Jumper Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Surface Mount Connectors
Horizontal
Single Row .........................................................150
Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Vertical
Single Row .....................................................152-154
Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155, 156
Thru-Hole Connectors
Horizontal
1Row to 2 Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
2Row to 4 Row .....................................................158
Vertical
1Row to 2 Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
2Row to 4 Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Part Numbering Guideline for SMT and Through-Hole Connectors . . . . . . . . . . . . . . 161
Flex Termination "Duckbill" Connectors
Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162, 163
Part Numbering Guideline for Flex Termination "Duckbill" Connectors . . . . . . . . . . . . 163
Solder Cup Connectors
Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
PartNumbering Guideline for Solder Cup Termination . . . . . . . . . . . . . . . . . . . . . . . . 166
Panel Mount Connectors
Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Two Row ............................................................168
Part Numbering Guideline for Panel Mount Connectors . . . . . . . . . . . . . . . . . . . . . . . 169
PartNumber Index Cross Reference ..................................170-178
NANONICS Connectors
Table of Contents (Continued)
138
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179-196
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Quick Disconnect
Plug Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180, 181
Plug Assemblies with Backshells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182, 183
Receptacle Assemblies, Flush Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184, 185
Threaded Coupling
Plug Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186, 187
Plug Assemblies with Backshells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188, 189
Receptacle Assemblies, Panel Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190, 191
Panel Mount Receptacle Assemblies w/Backshells. . . . . . . . . . . . . . . . . . . . . . . 192, 193
Part Numbering Guideline for Environmentally Sealed Circular Connectors. . . . . . . . 194
Part Number Index Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Coaxial Connectors ...........................................197-206
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Typical VSWR and Insertion Loss ..........................................198
50 Ohm Coax Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Part Numbering Guideline for 50 Ohm Coax Connectors . . . . . . . . . . . . . . . . . . . . . . . 200
Horizontal SMT 50 Ohm Coax Connectors...................................201
Part Numbering Guideline for Horizontal SMT 50 Ohm Coax Connectors . . . . . . . . . . 202
50 Ohm Coax with Mixed Signal Connectors.................................203
Part Numbering Guideline for 50 Ohm Coax w/Mixed Signal Connectors . . . . . . . . . . 204
Part Number Index Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Strip Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207-214
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Wired Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Part Numbering Guideline for Strip Wired Connectors . . . . . . . . . . . . . . . . . . . . . . . . . 209
Surface Mount Connectors ...............................................210
Thru-Hole Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Part Numbering Guideline for SMT and Thru-Hole Connectors . . . . . . . . . . . . . . . . . . . 212
PartNumber Index Cross Reference .......................................213
NANONICS Connectors
Nano-Miniature Connectors - Introduction
139
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Nanonics Connectors
5
Nano-miniature connectors
constitute a family of inter-
connect devices with center
to center contact spacing of
.025”. In comparison to
other connector families,
they are often thought of as
the smallest practical con-
nector system for separable
interfaces. Despite being
smaller,these nano-minia-
tureconnectors are tested
with a few size-related mod-
ifications per the guidelines
of MIL-DTL-83513 (written
for .050” micro-miniature
connectors). Nano-minia-
tureconnectors combine
their appealing size and
weight with desired per-
formance attributes such as
high reliability, low contact
resistance and wide operat-
ing temperature range,
making them among the
smallest and toughest
connectors available to
designers.
The Contact System
Nanonics connectors utilize
the same contact system
throughout the entire prod-
uct family.This contact
system uses a “spring
socket” as opposed to
most connector designs,
which use a “spring pin”.
In this design, the socket
member of the contact pair
employs a dimple located
inside the contact tube.
When the pin is engaged
with this socket, the dimple
creates the desired spring
action by forcing the pin to
offset to the opposite side
of the socket tube. The
result is a gold-on-gold
mating area covering a
minimum of 180° of the
contact surface. This also
creates a desirable mating
force of no greater than 6
ounces per contact and a
resistance of .003 ~ .008
ohms. This type of contact
system begins with a pre-
plated BeCu alloy material
that is then formed to yield
arugged, seamless con-
tact. Both the blind-bore
seamless pin and the
seamless one piece socket
have a burnished gold
finish on both the inside
and outside surfaces. This
gold finish provides contact
integrity for superior
reliability and environmental
performance.
Wire
Stop
Crimp
Area
Dimple for
Engaging Force
Seamless
Blind-Bore Pin
Contact Configuration
NANONICS Connectors
Nano-Miniature Connectors
140
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Technical and Performance
Data
Electrical
Contact Resistance –.003 - .008
ohms
Current Rating –1amp max. per
contact
Dielectric Withstanding Voltage –
Volts RMS 60 Hz at room ambient con-
ditions. At sea level 500V. At 70,000 ft.
150V.
Insulation Resistance – 5000
megohms min. (@ 500 VDC) at room
ambient conditions.
Magnetic Permeability –2mu max.
Mechanical
Contact Engagement & Separation
–Engaging force is 6.0 oz. max.
Separation force is 0.5 oz. min.
Mating Force Maximum –
Calculated as 10 oz. multiplied by the
number of contacts.
Environmental
Temperature Range –-200° C to
+200° C
Shock –No discontinuity in excess of 1
µ sec. when tested in accordance with
MIL-STD-1344, Method 2004.1, Test
Condition E.
Vibration –No discontinuity in excess
of 1 µ sec. when tested in accordance
with MIL-STD-1344, Method 2005.1,
Test Condition IV.
Solderability –Connectors shall meet
the test requirements of MIL-STD-202,
Method 208.
Durablity –No mechanical or electrical
defects detrimental to the function of the
connectors after 500 cycles of mating
and unmating, without the use of
hardware.
Humidity –After exposure to humidity
as specified by MIL-STD-1344, Method
1002.2, Type II, IR shall be 1 megohm
min. (@ 100 VDC) within 2 hours of
conditioning and 1000 megohms min.
(@ 100 VDC) after 24 hours of condi-
tioning.
Salt Spray –Connectors shall meet the
performance requirements of contact
resistance, mating and unmating forces,
and contact retention after being subject-
ed to the 48 hour 5 % solution salt
spray test per MIL-STD-1344, Method
1001, Condition B.
Fluid Immersion –Unmated connec-
tors after being fully immersed in one of
the following fluids, for the prescribed
time, will mate at a force of 10 oz. multi-
plied by the number of contacts or less:
Perchloroethylene, 2 hours; Lubricating
oil per MIL-L-23699, 20 hours.
Crimp Tensile Strength –
(Unassembled contacts with crimped
stranded wire terminations) Wires will
not pull out of the contacts when the fol-
lowing axial load is applied: #30 AWG,
2lbs.
Thermal Vacuum Outgassing –
Connectors shall have a maximum total
mass loss (TML) of 1.0 % of the original
specimen mass and a maximum collect-
ed volatile condensable materials
(CVCM) content of 0.1 % of the original
specimen mass when tested in accor-
dance with SP-R-0022A.
Material and Finish
Contacts –BeCu alloy plated with gold
per MIL-G-45204 Type II over nickel per
QQ-N-290.
Plastic Insulators and Shells –
30% glassed filled Liquid Crystal
Polymer (LCP).
Metal Shells –6061-T6 Aluminum
with electroless nickel plating per MIL-
C-26074. Stainless steel and gold plat-
ed shells are also available.
DUALOBE Rectangular Connectors
141
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular Connectors
Nanonics D-style rectangu-
lar connectors have earned
the distinction of being the
most popular and widely
utilized style of Nano con-
nectors. These connectors
incorporate the DUALOBE
polarization scheme. This
polarization scheme
negates the need for
mating guide pins and
does not increase the
package size. The
DUALOBE series of
connectors are available in
both machined aluminum
and molded plastic shells,
both in one and two row
connector housings. Single
row configurations com-
monly have standardpin
counts from 5 to 51, while
the higher density two row
configurations have pin
counts from 9 to 65. These
connectors can be termi-
nated in many different
ways. Standard configura-
tions include wires, surface
mount, thru-hole, solder
cup, “duckbill”, and panel
mount. Wired harness
assemblies and custom
configurations can also be
accommodated. Such
custom configurations
include filtered, hermetic,
environmentally sealed,
and blind mate connectors.
This family of connectors is
designed to meet the
requirements of MIL-DTL-
83513, with a few size relat-
ed modifications.
Designed primarily for the
military and aerospace
industry,the DUALOBE
series is especially well
suited when high reliability,
coupled with reduced size
and weight, are serious
design parameters. A clear
example of this is the use
of Nanonics connectors in
such applications as smart
munitions, missile defense,
aircraft communications,
and UAV’s. In addition to
the above applications, with
the wide temperaturerange
of the DUALOBE connector
(-200°C to +200°C), the
space and petroleum
industries have also found
many uses for this connec-
tor. The performance and
reliability at cryogenic tem-
peratures, along with the
low outgassing material
properties, has led to an
increased usage in space
applications. Such applica-
tions include nitrogen-
cooled optics, low and high
earth orbiting satellites,
telescopes, deep space
probes, orbiters, and
rovers. On the opposite
end of the spectrum, the
petroleum exploration
industry utilizes these
connectors for their per-
formance and reliability in
downhole environments at
temperatures exceeding
150°C.
DUALOBE Rectangular
Connectors
5
DUALOBE Rectangular Connectors
142
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Position 1
.205
[5.21]
.117
[2.97]
.086
[2.18]
.075
[1.91] 2 Plcs.
.043
[1.09] 2 Plcs.
.038
[0.97] Typ.
B
C
L
Wired Connectors — Single Row, Flying Leads
Position 1
.223
[5.66]
.086
[2.18]
.112
[2.84] 2 Plcs.
.043
[1.09] 2 Plcs.
.038
[0.97] Typ.
B
C
L
Dimensions
Size BCL
50.233 [5.92] 0.3085 [7.84] 0.100 [2.54]
90.333 [8.46] 0.4085 [10.38] 0.200 [5.08]
15 0.483 [12.27] 0.5585 [14.19] 0.350 [8.89]
25 0.733 [18.62] 0.8085 [20.54] 0.600 [15.24]
37 1.033 [26.24] 1.1085 [28.16] 0.900 [22.86]
51 1.383 [35.13] 1.4585 [37.05] 1.250 [31.75]
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 5, 9, 15,
25, 37, and 51
nFactory wired to your
specifications
nContact Tyco Electronics for
custom configurations
Plug with Flying Leads
Drawing Number 1589455
Receptacle with Flying Leads
Drawing Number 1589457
Plug
Receptacle
DUALOBE Rectangular Connectors
143
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
Position 1
Position “Size”
.205
[5.21]
.117
[2.97]
.126
[3.20]
.040
[1.02] Typ.
.075
[1.91]2Plcs.
.058
[1.47] 2Plcs.
.038
[0.97] Typ.
B
C
L
Wired Connectors — Two Row, Flying Leads
Position 1
Position
“Size”
.223
[5.66]
.126
[3.20]
.112
[2.84] 2Plcs.
.058
[1.47] 2Plcs..038
[0.97] Typ.
.040
[1.02] Typ.
B
L
C
Dimensions
Size BCL
90.229 [5.82] 0.3085 [7.84] 0.100 [2.54]
15 0.304 [7.72] 0.3835 [9.74] 0.175 [4.45]
25 0.429 [10.90] 0.5085 [12.92] 0.300 [7.62]
37 0.579 [14.71] 0.6585 [16.73] 0.450 [11.43]
51 0.754 [19.15] 0.8335 [21.17] 0.625 [15.88]
65 0.929 [23.60] 1.0085 [25.62] 0.800 [20.32]
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 9, 15, 25,
37, 51 and 65
nFactory wired to your
specifications
nContact Tyco Electronics for
custom configurations
Plug with Flying Leads
Drawing Number 1589472
Receptacle with Flying Leads
Drawing Number 1589476
Plug
Receptacle
DUALOBE Rectangular Connectors
144
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Part Numbering Guideline for Wired Connectors
DUALOBE Connectors - Wire Terminations
SX X XXX XX X XX XXX X
Positions
005 5 Position (single row only)
009 9 Position
015 15 Position
025 25 Position
037 37 Position
051 51 Position
065 65 Position (two row only)
Type
LLCP (Plastic)
MMetal (Al, Ni Plate)
Rows
S1 Row
T2 Row
Class
SDualobe
Threads/Jackscrew
Threads (Receptacles Only)
NThread for 1.0 mm Jackscrews
QThread for 1.2 mm Jackscrews
Conductor Type
DX White TEFLON
DY White PTFE M16878/6
DC Color Coded TEFLON
DM Color Coded TEFLON per MIL-STD-681
DT White TEFZEL M22759/33
GX TEFLON Ribbon Cable FEP
Conductor Length
XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches)
CXX A "C" followed by two numbers, length is in centimeters ( i.e. C06 = six centimeters)
MXX An "M" followed by two numbers, length is in meters ( i.e. M02 = two meters)
Conductor Size/Strands
028 AWG Solid
130 AWG Solid
230 AWG 7 Strand
332 AWG 7 Strand
434 AWG 7 Strand
Configurations
PC Plug
SC Receptacle
Jackscrews (Plugs Only)
M1.0 mm Non Captive Jackscrew
N1.0 mm Captive Jackscrew
Q1.2 mm Captive Jackscrew
DUALOBE Rectangular Connectors
145
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
Jumper Assembly Connectors — Single Row
.205
[5.21]
Position 1
Length as Specified
in Part Number
.117
[2.97]
.086
[2.18]
Jumper Assembly, Plug To Plug,
Single Row Dualobe,
Plastic or Metal
1589735
BCL
.038
[.97] Typ.
.075
[1.91] 2 Plcs.
Position 1
Position 1
.043
[1.09] 2 Plcs.
Dimensions
Size BC L
50.233 [5.92] 0.3085 [7.84] 0.100 [2.54]
90.333 [8.46] 0.4085 [10.38] 0.200 [5.08]
15 0.483 [12.27] 0.5585 [14.19] 0.350 [8.89]
25 0.733 [18.62] 0.8085 [20.54] 0.600 [15.24]
37 1.033 [26.24] 1.1085 [28.16] 0.900 [22.86]
51 1.383 [35.13] 1.4585 [37.05] 1.250 [31.75]
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 5, 9, 15,
25, 37, and 51
nFactory wired to your
specifications
nContact Tyco Electronics for
custom configurations
Position 1
Position 1
Length as Specified
in Part Number
.086
[2.18]
Jumper Assembly, Plug
To Receptacle, Single Row
Dualobe, Plastic or Metal
1589736
.223
[5.66]
.205
[5.21] .086
[2.18]
.117
[2.97]
C
L
.038
[.97] Typ.
.075
[1.91] 2 Plcs.
.038
[.97] Typ.
.043
[1.09] 2Plcs.
.112
[2.85]
2 Plcs.
.043
[1.09] 2 Plcs.
CL
BB
B
Plug to Plug
Drawing Number 1589735
Plug to Receptacle
Drawing Number 1589736
Plug to Receptacle
DUALOBE Rectangular Connectors
Jumper Assembly Connectors — Single Row (Continued)
146
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Position 1
Length as Specified
in Part Number
.086
[2.18]
.223
[5.66]
Position 1
Jumper Assembly, Receptacle
To Receptacle, Single Row
Dualobe, Plastic or Metal
1589803
.038
[0.97] Typ.
C
LBB
.043
[1.09] 2 Plcs.
.112
[2.85] 2 Plcs.
Receptacle to Receptacle
Drawing Number 1589803
Dimensions
Size BCL
50.233 [5.92] 0.3085 [7.84] 0.100 [2.54]
90.333 [8.46] 0.4085 [10.38] 0.200 [5.08]
15 0.483 [12.27] 0.5585 [14.19] 0.350 [8.89]
25 0.733 [18.62] 0.8085 [20.54] 0.600 [15.24]
37 1.033 [26.24] 1.1085 [28.16] 0.900 [22.86]
51 1.383 [35.13] 1.4585 [37.05] 1.250 [31.75]
DUALOBE Rectangular Connectors
Jumper Assembly Connectors — Two Row
147
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
Plug to Receptacle
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 9, 15, 25,
37, 51 and 65
nFactory wired to your
specifications
nContact Tyco Electronics for
custom configurations
Jumper Assembly, Plug to Plug
Two Row Dualobe,
Plastic or Metal
1589737
Position 1
Length as Specified
in Part Number
.205
[5.21]
.117
[2.97]
Position 1
.126
[3.20]
.075
[1.91] 2 Plcs.
.058
[1.47] 2 Plcs.
.038
[.97] Typ.
.040
[1.02] Typ.
CL
B
Jumper Assembly, Plug
To Receptacle, Two Row
Dualobe, Plastic or Metal
1589738
Position 1
Length as Specified
in Part Number
.205
[5.21]
.126
[3.20]
.223
[5.66]
.117
[2.97]
Position 1
.126
[3.20]
.038
[.97] Typ.
.040
[1.02] Typ.
.058
[1.47]
2 Plcs.
C
LB
B
.112
[2.85]
2 Plcs.
BCL
.058
[1.47] 2 Plcs.
.038
[.97] Typ.
.040
[1.02] Typ.
.075
[1.91] 2 Plcs.
Plug to Plug
Drawing Number 1589737
Plug to Receptacle
Drawing Number 1589738
Dimensions
Size BC L
90.229 [5.82] 0.3085 [7.84] 0.100 [2.54]
15 0.304 [7.72] 0.3835 [9.74] 0.175 [4.45]
25 0.429 [10.90] 0.5085 [12.92] 0.300 [7.62]
37 0.579 [14.71] 0.6585 [16.73] 0.450 [11.43]
51 0.754 [19.15] 0.8335 [21.17] 0.625 [15.88]
65 0.929 [23.60] 1.0085 [25.62] 0.800 [20.32]
DUALOBE Rectangular Connectors
Jumper Assembly Connectors — Two Row (Continued)
148
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Position 1
Length as Specified
in Part Number
.223
[5.66]
.126
[3.20]
Position 1
Jumper Assembly, Receptacle
To Receptacle, Two Row
Dualobe, Plastic or Metal
1589804
.038
[.97] Typ.
.040
[1.02] Typ.
C
LB
B
.112
[2.85] 2 Plcs.
.058
[1.47] 2 Plcs.
Receptacle to Receptacle
Drawing Number 1589804
Dimensions
Size B C L
90.229 [5.82] 0.3085 [7.84] 0.100 [2.54]
15 0.304 [7.72] 0.3835 [9.74] 0.175 [4.45]
25 0.429 [10.90] 0.5085 [12.92] 0.300 [7.62]
37 0.579 [14.71] 0.6585 [16.73] 0.450 [11.43]
51 0.754 [19.15] 0.8335 [21.17] 0.625 [15.88]
65 0.929 [23.60] 1.0085 [25.62] 0.800 [20.32]
DUALOBE Rectangular Connectors
149
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
Part Numbering Guideline for Jumper Assemblies
DUALOBE Connectors - Jumper Terminations
JX X XXX XX X XX XXX X
Positions
005 5 Position (single row only)
009 9 Position
015 15 Position
025 25 Position
037 37 Position
051 51 Position
065 65 Position (two row only)
Type
LLCP (Plastic)
MMetal (Al, Ni Plate)
Rows
S1 Row
T2 Row
Class
JJumper
Threads/Jackscrews
Threads (Receptacles Only)
NThread for 1.0 mm Jackscrews
QThread for 1.2 mm Jackscrews
Conductor Type
DXWhite Teflon
DY White PTFE M16878/6
DC Color Coded Teflon
DMColor Coded Teflon per MIL-STD-681
DT White Tefzel M22759/33
GX Telfon Ribbon Cable
Conductor Length
XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches)
CXX A "C" followed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters)
MXX An "M" followed by two numbers, length is in meters ( i.e. M02 = 2 meters)
Conductor Size/Strands
028 AWG Solid
130 AWG Solid
230 AWG 7 Strand
332 AWG 7 Strand
434 AWG 7 Strand
Configuration
PP Plug to Plug, 1 to 1
PR Plug to Receptacle, 1 to 1
PD Plug to Plug, low to high in row
RR Receptacle to Receptacle, 1 to 1
Jackscrews (Plugs Only)
M1.0 mm Non Captive Jackscrews
N1.0 mm Captive Jackscrews
Q1.2 mm Captive Jackscrews
DUALOBE Rectangular Connectors
150
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 5, 9, 15,
25, 37, and 51
nContact Tyco Electronics for
custom configurations
nSuggested pad layouts are
available on the referenced
drawings on the Tyco
Electronics website
Surface Mount Connectors — Horizontal, Single Row
Receptacle
.038
[.97] Typ.
Position 1 B
L
C
.086
[2.18]
.043
[1.09] 2 Plcs.
.205
[5.21]
A
.075
[.69] 2 Plcs.
.117
[2.97]
.025
[.64] Pitch
.255
[6.48] Typ.
.020
[.51] Typ.
Plug Assembly,
Horizontal Surface Mount,
Single Row Dualobe, Plastic or Metal
1589460
Plug Assembly
Drawing Number 1589460
Jackscrews Omitted for Clarity
A
.025
[.64] Pitch
.223
[5.66]
B
.112
[2.84] 2 Plcs.
B
L
C
.038
[.97] Typ.
Position 1
.086
[2.18]
.043
[1.09] 2 Plcs.
Receptacle Assembly,
Horizontal Surface Mount,
Single Row Dualobe, Plastic or Metal
1589462
.273
[6.93] Typ.
.020
[.51] Typ.
Receptacle Assembly
Drawing Number 1589462
Dimensions
Size AB CL
50.050 [1.27] 0.233 [5.92] 0.3085 [7.84] 0.100 [2.54]
90.100 [2.54] 0.333 [8.46] 0.4085 [10.38] 0.200 [5.08]
15 0.175 [4.45] 0.483 [12.27] 0.5585 [14.19] 0.350 [8.89]
25 0.300 [7.62] 0.733 [18.62] 0.8085 [20.54] 0.600 [15.24]
37 0.450 [11.43] 1.085 [26.24] 1.1085 [28.16] 0.900 [22.86]
51 0.625 [15.88] 1.383 [35.13] 1.4585 [37.05] 1.250 [31.75]
DUALOBE Rectangular Connectors
151
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
Surface Mount Connectors — Horizontal, Two Row
A
.025
[.64] Pitch
.0125
[.318] Offset
.223
[5.66]
B
.112
[2.84] 2 Plcs. .323
[8.20] Typ.
.273
[6.93] Typ.
.020
[.51] Typ.
Position 1
B.038
[.97] Typ.
.040
[1.02] Typ.
C
L
Position ‘Size’
.126
[3.20]
.058
[1.47] 2 Plcs.
Receptacle Assembly,
Horizontal Surface Mount,
Two Row Dualobe, Plastic or Metal
1589483
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 9, 15, 25,
37, 51 and 65
nContact Tyco Electronics for
custom configurations
nSuggested pad layouts are
available on the referenced
drawings on the Tyco
Electronics website
A
.025
[.64] Pitch
.0125
[.318] Offset
.205
[5.21]
.075
[.69] 2 Plcs.
.117
[2.97]
Position 1
.058
[1.47] 2 Plcs.
.126
[3.20]
.038
[.97] Typ.
.040
[1.02] Typ.
B
L
CPosition ‘Size’
Plug Assembly,
Horizontal Surface Mount,
Two Row Dualobe, Plastic or Metal
1589490
.305
[7.75] Typ.
.255
[6.48] Typ.
.020
[.51] Typ.
Receptacle Assembly
Drawing Number 1589483
Jackscrews Omitted for Clarity
Plug Assembly
Drawing Number 1589490
Receptacle
Dimensions
Size AB CL
90.050 [1.27] 0.229 [5.82] 0.3085 [7.84] 0.100 [2.54]
15 0.875 [2.23] 0.304 [7.72] 0.3835 [9.74] 0.175 [4.45]
25 0.150 [3.81] 0.429 [10.90] 0.5085 [12.92] 0.300 [8.89]
37 0.225 [5.72] 0.579 [14.71] 0.6585 [16.73] 0.450 [11.43]
51 0.313 [7.95] 0.754 [19.15] 0.8335 [21.17] 0.625 [15.88]
65 0.400 [10.16] 0.929 [23.60] 1.0085 [25.62] 0.800 [20.32]
DUALOBE Rectangular Connectors
Surface Mount Connectors — Vertical, Single Row
152
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Receptacle
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 5, 9, 15,
25, 37, and 51
nContact Tyco Electronics for
custom configurations
nSuggested pad layouts are
available on the referenced
drawings on the Tyco
Electronics website
.025
[.64] Pitch
A
L
C
Position 1
.038
[.97] Typ.
.043
[1.09] 2 Plcs.
.086
[2.18]
B
B
.223
[5.66]
.112
[2.84] 2 Plcs.
.030
[.76] Typ.
Receptacle Assembly,
Vertical Surface Mount,
Single Row Dualobe, Plastic or Metal
1589463
L
C
Position 1
.043
[1.09] 2 Plcs.
A
B
.025
[.64] Pitch
.038
[.97] Typ.
.086
[2.18]
.205
[5.21]
.030
[.76] Typ.
.117
[2.97]
.075
[1.91] 2 Plcs.
Plug Assembly,
Vertical Surface Mount,
Single Row Dualobe, Plastic or Metal
1589465
Receptacle Assembly
Drawing Number 1589463
Plug Assembly
Drawing Number 1589465
Dimensions
Size AB CL
50.050 [1.27] 0.233 [5.92] 0.3085 [7.84] 0.100 [2.54]
90.100 [2.54] 0.333 [8.46] 0.4085 [10.38] 0.200 [5.08]
15 0.175 [4.45] 0.483 [12.27] 0.5585 [14.19] 0.350 [8.89]
25 0.300 [7.62] 0.733 [18.62] 0.8085 [20.54] 0.600 [15.24]
37 0.450 [11.43] 1.085 [26.24] 1.1085 [28.16] 0.900 [22.86]
51 0.625 [15.88] 1.383 [35.13] 1.4585 [37.05] 1.250 [31.75]
DUALOBE Rectangular Connectors
Surface Mount Connectors — Vertical, Single Row with Alternating Leads
153
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
L
C
.043
[1.09] 2 Plcs.
A
.038
[.97] Typ.
Position 1
.050
[1.27] Pitch
.025
[.64]
.086
[2.18]
B
.223
[5.66]
.112
[2.84] 2 Plcs.
.030
[.76] Typ.
Receptacle Assembly,
Vertical Surface Mount, Alternating Leads
Single Row Dualobe, Plastic or Metal
1589464
B
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 5, 9, 15,
25, 37, and 51
nContact Tyco Electronics for
custom configurations
nSuggested pad layouts are
available on the referenced
drawings on the Tyco
Electronics website
L
C
.043
[1.09] 2 Plcs.
Position 1
B
A
.050
[1.27] Pitch
.038
[.97] Typ.
.030
[.76] Typ.
.025
[.64]
.086
[2.18]
.075
[1.91] 2 Plcs.
.205
[5.21]
.117
[2.97]
Plug Assembly,
Vertical Surface Mount, Alternating Leads
Single Row Dualobe, Plastic or Metal
1589466
Receptacle Assembly
Drawing Number 1589464
Plug Assembly
Drawing Number 1589466
Dimensions
Size AB CL
50.050 [1.27] 0.233 [5.92] 0.3085 [7.84] 0.100 [2.54]
90.100 [2.54] 0.333 [8.46] 0.4085 [10.38] 0.200 [5.08]
15 0.175 [4.45] 0.483 [12.27] 0.5585 [14.19] 0.350 [8.89]
25 0.300 [7.62] 0.733 [18.62] 0.8085 [20.54] 0.600 [15.24]
37 0.450 [11.43] 1.085 [26.24] 1.1085 [28.16] 0.900 [22.86]
51 0.625 [15.88] 1.383 [35.13] 1.4585 [37.05] 1.250 [31.75]
DUALOBE Rectangular Connectors
154
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Surface Mount Connectors — Vertical, Single Row with Integrated Standoffs
L
C
Position 1
.038
[.97] Typ.
.086
[2.18]
.025
[.64] Pitch
A
B
.043
[1.09] 2Plcs.
.253
[6.43]
.223
[5.66]
.072
[1.83] 2 Plcs.
Receptacle Assembly,
Vertical Surface Mount, Single Row Dualobe,
Metal w/ Integrated Standoffs
1589467
Product Facts
nMetal Shell
nStandard Sizes: 5 , 9, 15,
25, 37, and 51
nContact Tyco Electronics for
custom configurations
nSuggested pad layouts are
available on the referenced
drawings on the Tyco
Electronics website
Receptacle Assembly
Drawing Number 1589467
Dimensions
Size AB CL
50.050 [1.27] 0.233 [5.92] 0.3085 [7.84] 0.100 [2.54]
90.100 [2.54] 0.333 [8.46] 0.4085 [10.38] 0.200 [5.08]
15 0.175 [4.45] 0.483 [12.27] 0.5585 [14.19] 0.350 [8.89]
25 0.300 [7.62] 0.733 [18.62] 0.8085 [20.54] 0.600 [15.24]
37 0.450 [11.43] 1.085 [26.24] 1.1085 [28.16] 0.900 [22.86]
51 0.625 [15.88] 1.383 [35.13] 1.4585 [37.05] 1.250 [31.75]
DUALOBE Rectangular Connectors
155
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
Surface Mount Connectors — Vertical, Two Row
L
C
Position 1
.038
[.97] Typ.
.0125
[.318]
Offset .040
[1.02] Typ.
.025
[.64] Pitch
A
B
.126
[3.20]
.058
[1.47] 2 Plcs.
B
.112
[2.84] 2 Plcs.
.030
[.76] Typ.
.223
[5.66]
Receptacle Assembly,
Vertical Surface Mount,
Two Row Dualobe, Plastic or Metal
1589484
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 9, 15, 25,
37, 51 and 65
nContact Tyco Electronics for
custom configurations
nSuggested pad layouts are
available on the referenced
drawings on the Tyco
Electronics website
L
C
Position 1
.058
[1.47]
2 Plcs.
.126
[3.20] .025
[.64] Pitch
.030
[.76] Typ.
.040
[1.02] Typ.
.038
[.97] Typ.
.0125
[.318] Offset
A
B
.205
[5.21]
.075
[1.91] 2 Plcs.
.117
[2.97]
Plug Assembly,
Vertical Surface Mount,
Two Row Dualobe, Plastic or Metal
1589485
Receptacle Assembly
Drawing Number 1589484
Plug Assembly
Drawing Number 1589485
Dimensions
Size AB CL
90.050 [1.27] 0.229 [5.82] 0.3085 [7.84] 0.100 [2.54]
15 0.875 [2.23] 0.304 [7.72] 0.3835 [9.74] 0.175 [4.45]
25 0.150 [3.81] 0.429 [10.90] 0.5085 [12.92] 0.300 [8.89]
37 0.225 [5.72] 0.579 [14.71] 0.6585 [16.73] 0.450 [11.43]
51 0.313 [7.95] 0.754 [19.15] 0.8335 [21.17] 0.625 [15.88]
65 0.400 [10.16] 0.929 [23.60] 1.0085 [25.62] 0.800 [20.32]
Receptacle
DUALOBE Rectangular Connectors
Surface Mount Connectors — Vertical, Two Row with Integrated Standoffs
156
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
L
C
.058
[1.47] 2 Plcs.
.126
[3.20]
.025
[.64] Pitch
.0125
[.318]
Offset
A
B
.038
[.97] Typ.
.040
[1.02] Typ.
Position 1
.223
[5.66]
.253
[6.43]
.072
[1.83] 2 Plcs.
Receptacle Assembly,
Vertical Surface Mount, Two Row Dualobe,
Metal w/ Integrated Standoffs
1589486
Product Facts
nMetal Shell
nStandard Sizes: 9, 15, 25,
37, 51 and 65
nContact Tyco Electronics for
custom configurations
nSuggested pad layouts are
available on the referenced
drawings on the Tyco
Electronics website
Receptacle Assembly
Drawing Number 1589486
Dimensions
Size AB CL
90.050 [1.27] 0.229 [5.82] 0.3085 [7.84] .100 [2.54]
15 0.875 [2.23] 0.304 [7.72] 0.3835 [9.74] .175 [4.45]
25 0.150 [3.81] 0.429 [10.90] 0.5085 [12.92] .300 [8.89]
37 0.225 [5.72] 0.579 [14.71] 0.6585 [16.73] .450 [11.43]
51 0.313 [7.95] 0.754 [19.15] 0.8335 [21.17] .625 [15.88]
65 0.400 [10.16] 0.929 [23.60] 1.0085 [25.62] .800 [20.32]
DUALOBE Rectangular Connectors
Thru-Hole Connectors — Horizontal, 1 Row to 2 Row, .050 Spacing
157
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
B
.223
[5.66]
.140 [3.56]
.112
[2.84] 2 Plcs.
Position 1
.038
[.97] Typ.
.273
[6.93] Typ.
.050
[1.27] Typ.
.090
[2.29] Typ.
L
B
C
.086
[2.18]
.043
[1.09] 2 Plcs.
Receptacle Assembly, Horizontal Mount,
Through Hole, 1 Row to 2 Row,
.050 Spacing, Plastic or Metal
1589469
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 5, 9, 15,
25, 37, and 51
nContact Tyco Electronics for
custom configurations
nSuggested thru-hole
layouts are available on the
referenced drawings on the
Tyco Electronics website
B
.205
[5.21]
.140
[3.56]
.075
[1.91] 2 Plcs.
.050
[1.27] Typ.
.255
[6.48] Typ.
.117
[2.97]
L
C
.038
[.97] Typ.
.090
[2.29] Typ.
.043
[1.09] 2 Plcs.
.086
[2.18]
Position 1
Plug Assembly, Horizontal Mount,
Through Hole, 1 Row to 2 Row,
.050 Spacing, Plastic or Metal
1589471
Receptacle Assembly
Drawing Number 1589469
Plug Assembly
Drawing Number 1589471
Dimensions
Size BCL
50.233 [5.92] 0.3085 [7.84] 0.100 [2.54]
90.333 [8.46] 0.4085 [10.38] 0.200 [5.08]
15 0.483 [12.27] 0.5585 [14.19] 0.350 [8.89]
25 0.733 [18.62] 0.8085 [20.54] 0.600 [15.24]
37 1.033 [26.24] 1.1085 [28.16] 0.900 [22.86]
51 1.383 [35.13] 1.4585 [37.05] 1.250 [31.75]
Receptacle
B
.205
[5.21]
.240
[6.10] .075
[1.91] 2 Plcs.
.050
[1.27] Typ.
.255
[6.48] Typ.
.117
[2.97]
.038
[.97] Typ.
.058
[1.47] 2 Plcs.
L
C
.040
[1.02] Typ.
.126
[3.20]
.090
[2.29] Typ.
Position ‘Size’
Position 1
DUALOBE Rectangular Connectors
Thru-Hole Connectors — Horizontal, 2 Row to 4 Row, .050 Spacing
158 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 9, 15, 25,
37, 51 and 65
nContact Tyco Electronics for
custom configurations
nSuggested thru-hole
layouts are available on the
referenced drawings on the
Tyco Electronics website
B
.112
[2.84] 2 Plcs.
.223
[5.66]
.240
[6.10]
B
L
C
.038
[.97] Typ.
.050
[1.27] Typ.
.273
[6.93] Typ.
.040
[1.02] Typ.
.090
[2.29] Typ.
.058
[1.47]
2 Plcs.
.126
[3.20]
Position ‘Size’
Position 1
Receptacle Assembly, Horizontal Mount,
Through Hole, 2 Row to 4 Row,
.050 Spacing, Plastic or Metal
1589487
Plug Assembly
Drawing Number 1589481
Receptacle Assembly
Drawing Number 1589487
Dimensions
Size BC L
90.229 [5.82] 0.3085 [7.84] 0.100 [2.54]
15 0.304 [7.72] 0.3835 [9.74] 0.175 [4.45]
25 0.429 [10.90] 0.5085 [12.92] 0.300 [7.62]
37 0.579 [14.71] 0.6585 [16.73] 0.450 [11.43]
51 0.754 [19.15] 0.8335 [21.17] 0.625 [15.88]
65 0.929 [23.60] 1.0085 [25.62] 0.800 [20.32]
Receptacle
DUALOBE Rectangular Connectors
Thru-Hole Connectors — Vertical Mount, 1 Row to 2 Row Connectors, .050 Spacing
159
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 5, 9, 15,
25, 37 and 51
nContact Tyco Electronics for
custom configurations
nSuggested thru-hole
layouts are available on the
referenced drawings on the
Tyco Electronics website
B
L
C
Position 1 .038
[.97] Typ.
.043
[1.09] 2 Plcs.
.086
[2.18]
.090
[2.29] Lead Length Typ.
.050
[1.27] Typ.
.020
[0.51] Typ.
.205
[5.21]
.117
[2.97]
.296
[7.52]
.140
[3.56]
Plug Assembly, Vertical Mount,
Through Hole, 1 to 2 Row,
.050 Spacing, Plastic or Metal
1589461
L
B
C
.043
[1.09] 2 Plcs.
.086
[2.18]
.038
[.97] Typ.
Position 1
B
.223
[5.66] .314
[7.98]
.140
[3.56]
.090
[2.29] Lead Length Typ.
.112
[2.84] 2 Plcs.
.020
[0.51] Typ.
.050
[1.27] Typ.
Receptacle Assembly, Vertical Mount,
Through Hole, 1 Row to 2 Row,
.050 Spacing, Plastic or Metal
1589470
Plug Assembly
Drawing Number 1589461
Receptacle Assembly
Drawing Number 1589470
Dimensions
Size BC L
50.233 [5.92] 0.3085 [7.84] 0.100 [2.54]
90.333 [8.46] 0.4085 [10.38] 0.200 [5.08]
15 0.483 [12.27] 0.5585 [14.19] 0.350 [8.89]
25 0.733 [18.62] 0.8085 [20.54] 0.600 [15.24]
37 1.033 [26.24] 1.1085 [28.16] 0.900 [22.86]
51 1.383 [35.13] 1.4585 [37.05] 1.250 [31.75]
Receptacle
DUALOBE Rectangular Connectors
Thru-Hole Connectors — Vertical Mount, 2 Row to 4 Row Connectors, .050 Spacing
160 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 9, 15, 25,
37, 51 and 65
nContact Tyco Electronics for
custom configurations
nSuggested thru-hole
layouts are available on the
referenced drawings on the
Tyco Electronics website
B
L
C
Position 1
.058
[1.47] 2 Plcs.
.126
[3.20]
.038
[.97] Typ.
.040
[1.02] Typ.
.117
[2.97]
.205
[5.21] .286
[7.26]
.24
[6.10]
.090
[2.29] Lead Length Typ. .020
[0.51] Typ.
.050
[1.27] Typ.
Plug Assembly, Vertical Mount,
Through Hole, 2 to 4 Row,
.050 Spacing, Plastic or Metal
1589482
C
B
L
Position ‘Size’
.126
[3.20]
.058
[1.47]
2Plcs.
.038
[.97] Typ.
.040
[1.02] Typ.
B
.223
[5.66] .304
[7.72]
.24
[6.10]
.090
[2.29] Lead LengthTyp.
.050
[1.27] Typ.
.020
[0.51] Typ.
Receptacle Assembly, Vertical Mount,
Through Hole, 2 to 4 Row,
.050 Spacing, Plastic or Metal
1589488
Plug Assembly
Drawing Number 1589482
Receptacle Assembly
Drawing Number 1589488
Dimensions
Size BC L
90.229 [5.82] 0.3085 [7.84] 0.100 [2.54]
15 0.304 [7.72] 0.3835 [9.74] 0.175 [4.45]
25 0.429 [10.90] 0.5085 [12.92] 0.300 [7.62]
37 0.579 [14.71] 0.6585 [16.73] 0.450 [11.43]
51 0.754 [19.15] 0.8335 [21.17] 0.625 [15.88]
65 0.929 [23.60] 1.0085 [25.62] 0.800 [20.32]
Receptacle
DUALOBE Rectangular Connectors
Part Numbering Guideline for Surface Mount and Thru-Hole Connectors
161
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
DUALOBE Connectors - Surface Mount and Thru Hole Terminations
SX X XXX XX(X) X X
Positions
005 5 Position (single row only)
009 9 Position
015 15 Position
025 25 Position
037 37 Position
051 51 Position
065 65 Position (two row only)
Type
LLCP (Plastic)
MMetal (Al, Ni Plate)
Rows
S1 Row
T2 Row
Class
SDualobe
Threads/Jackscrew
Threads (Receptacles Only)
NThread for 1.0 mm Jackscrews
QThread for 1.2 mm Jackscrews
Mounting Hardware
A1.2 mm x .160”
C1.0 mm x .200” w/ 2 standoffs
D1.2 mm x .160” w/ 2 standoffs
H1.0 mm x .160”
I1.2 mm x .200”
K1.0 mm x .200” w/ 4 standoffs
L1.2 mm x .200” w/ 2 standoffs
P1.2 mm x .200” w/ 4 standoffs
S1.0 mm x .160” w/ 2 standoffs
Configurations
B2 Plug, Horizontal SMT
B4 Plug, Vertical SMT
B42 Plug, Vertical SMT, .020” Extended Leads
B44 Plug, Vertical SMT, .040” Extended Leads
B43 Plug, Vertical SMT, .020” Extended Leads, 2 side exit (single row only)
B45 Plug, Vertical SMT, .040” Extended Leads, 2 side exit (single row only)
L2 Receptacle, Horizontal SMT
L4 Receptacle, Vertical SMT
L42 Receptacle, Vertical SMT, .020” Extended Leads
L44 Receptacle, Vertical SMT, .040” Extended Leads
L43 Receptacle, Vertical SMT, .020” Extended Leads, 2 side exit (single row only)
L45 Receptacle, Vertical SMT, .040” Extended Leads, 2 side exit (single row only)
L8 Receptacle, Vertical SMT, w/ integrated standoffs (metal shell only)
L82 Receptacle, Vertical SMT, w/ integrated standoffs, .020” Extended Leads (metal shell only)
L84 Receptacle, Vertical SMT, w/ integrated standoffs, .040” Extended Leads (metal shell only)
L83 Receptacle, Vertical SMT, w/ integrated standoffs, .020” Extended Leads (single row and metal shell only)
L85 Receptacle, Vertical SMT, w/ integrated standoffs, .040” Extended Leads (single row and metal shell only)
C5 Plug, Vertical Mount, Thru Hole
C6 Plug, Horizontal Mount, Thru Hole
M5 Receptacle, Vertical Mount, Thru Hole
M6 Receptacle, Horizontal Mount, Thru Hole
Jackscrews (Plugs Only)
M1.0 mm Non Captive Jackscrews
N1.0 mm Captive Jackscrews
Q1.2 mm Captive Jackscrews
DUALOBE Rectangular Connectors
Flex Termination “Duckbill” Connectors — Two Row
162 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 9, 15, 25,
37, 51 and 65
nContact Tyco Electronics for
custom configurations
C
L
B
.075
[1.91] 2 Plcs. .010
[0.25] Typ.
.100
[2.54] Typ.
.086
[2.18] Typ.
.205
[5.21]
.117
[2.97]
.058
[1.47] 2 Plcs.
.126
[3.20]
A
Max.
E
Position 1 Position
‘Size’
Flex TopView
Size 15 shown for referenceF
Position ‘Size’
Position 1 .038
[.97] Typ.
.040
[1.02] Typ.
.025
[0.64] Typ.
.050
[1.27] Typ.
.086
[2.18] Typ.
.017
[0.43]
Plug Assembly, Two Row Du
Duckbill Leads,
Plastic or Metal
1589066
C
L
B
.075
[1.91] 2Plcs. .010
[0.25] Typ.
.100
[2.54] Typ.
.086
[2.18] Typ.
.205
[5.21]
.117
[2.97]
.058
[1.47] 2 Plcs.
.126
[3.20]
A
Max.
DE
Position 1 Position
‘Size’
Flex TopView
Size 15 shown for referenceFlex Bottom View
Position ‘Size’
Position 1 .038
[.97] Typ.
.040
[1.02] Typ.
.025
[0.64] Typ.
.050
[1.27] Typ.
.086
[2.18] Typ.
.017
[0.43]
Plug Assembly, Two Row Dualobe,
Duckbill Leads,
Plastic or Metal
1589066
Typical Flex Pad Layout
Dimensions
Size ABCDEL
90.150 [3.81] 0.229 [5.82] 0.3085 [7.84] 0.0500 [1.27] 0.0375 [0.95] 0.100 [2.54]
15 0.225 [5.72] 0.304 [7.72] 0.3835 [9.74] 0.0875 [2.22] 0.0750 [1.90] 0.175 [4.45]
25 0.350 [8.89] 0.429 [10.90] 0.5085 [12.92] 0.1500 [3.81] 0.1375 [3.49] 0.300 [7.62]
37 0.500 [12.7] 0.579 [14.71] 0.6585 [16.73] 0.2250 [5.72] 0.2125 [5.40] 0.450 [11.43]
51 0.675 [17.1] 0.754 [19.15] 0.8335 [21.17] 0.3125 [7.94] 0.3000 [7.62] 0.625 [15.88]
65 0.850 [21.6] 0.929 [23.60] 1.0085 [25.62] 0.4000 [10.2] 0.3875 [9.84] 0.800 [20.32]
Jackscrews Omitted for
Clarity
Plug Assembly
Drawing Number 1589066
DUALOBE Rectangular Connectors
Flex Termination “Duckbill” Connectors — Two Row (Continued)
Part Numbering Guideline for Flex Termination “Duckbill” Connectors
163
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 7-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
DUALOBE Connectors - “Duckbill” Termination
S T X XXX 11378 XX X
Positions
009 9 Position
015 15 Position
025 25 Position
037 37 Position
051 51 Position
065 65 Position
Type
LLCP (Plastic)
MMetal (Al, Ni Plate)
Rows
T2 Row
Class
SDualobe
Threads/Jackscrew
Threads (Receptacles Only)
NThread for 1.0 mm Jackscrews
QThread for 1.2 mm Jackscrews
Configuration
PC Plug
SC Receptacle
Termination Code
11378 “Duckbill” Termination
Jackscrews (Plugs Only)
M1.0 mm Non Captive Jackscrews
N1.0 mm Captive Jackscrews
Q1.2 mm Captive Jackscrews
Typical Flex Pad Layout
.223
[5.66]
B
.112
[2.84] 2 Plcs.
B
C
L
Position ‘Size’
Position 1
.038
[.97] Typ.
.040
[1.02] Typ.
.126
[3.20]
.058
[1.47] 2Plcs.
Receptacle Assembly
Duckbill Leads,
Plastic or Metal
1
.010
[0.25] Typ.
.100
[2.54] Typ. .086
[2.18] Typ.
A
Max.
D
E
Position 1
Flex Top View
Size 15 shownfor reference
.025
[0.64] Typ.
.050
[1.27] Typ.
.086
[2.18] Typ.
.017
[0.43]
.223
[5.66]
B
.112
[2.84] 2 Plcs.
B
C
L
n ‘Size’
Position 1
.038
[.97] Typ.
.040
[1.02] Typ.
..058
[1.47] 2 Plcs.
Receptacle Assembly, Two Row Dualobe,
Duckbill Leads,
Plastic or Metal
1589067
.010
[0.25] Typ.
.100
[2.54] Typ. .086
[2.18] Typ.
A
Max.
D
E
Position 1Position
‘Size’
Flex Top View
Size 15 shownfor referenceFlex Bottom View
.025
[0.64] Typ.
.050
[1.27] Typ.
.086
[2.18] Typ.
.017
[0.43]
Receptacle Assembly
Drawing Number 1589067
DUALOBE Rectangular Connectors
Solder Cup Connectors — Single Row
164 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
L
.025
[.64] Pitch Type
.038
[.97] Typ.
Position 1
Position 1
.055
[1.40] Typ.
.117
[2.97]
.205
[5.21]
.075
[1.91] 2 Plcs.
.043
[1.09] 2 Plcs.
.086
[2.18]
C
B
Plug Assembly, Single Row Dualobe,
Solder Cup Termination,
Plastic or Metal
1589051
Product Facts
nPlastic or Metal Shell
nStandard Sizes: 5, 9, 15,
25, 37 and 51
nContact Tyco Electronics for
custom configurations
Position 1
Position 1
L.025
[.64] Pitch Type
.038
[.97] Typ.
.075
[1.91] Typ.
B
B
.223
[5.66]
.112
[2.84] 2 Plcs.
C
.043
[1.09] 2 Plcs.
.086
[2.18]
Receptacle Assembly, Single Row Dualob
Solder Cup Termination,
Plastic or Metal
1589052
Plug Assembly
Drawing Number 1589051
Receptacle Assembly
Drawing Number 1589052
Dimensions
Size BC L
50.233 [5.92] 0.3085 [7.84] 0.100 [2.54]
90.333 [8.46] 0.4085 [10.38] 0.200 [5.08]
15 0.483 [12.27] 0.5585 [14.19] 0.350 [8.89]
25 0.733 [18.62] 0.8085 [20.54] 0.600 [15.24]
37 1.033 [26.24] 1.1085 [28.16] 0.900 [22.86]
51 1.383 [35.13] 1.4585 [37.05] 1.250 [31.75]
DUALOBE Rectangular Connectors
Solder Cup Connectors — Two Row
165
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
L
.025
[.64] Pitch Type .038
[.97] Typ.
.040
[1.02] Typ.
.0125
[0.32] Offset
.055
[1.40] Typ.
.117
[2.97]
.075
[1.91] 2Plcs.
.205
[5.21]
C
B
Position ‘Size’
Position 1
.126
[3.20]
.058
[1.47] 2 Plcs.
Plug Assembly, Two Row Dualobe,
Solder Cup Termination,
Plastic or Metal
1589053
Product Facts
nPlastic or Metal Shell
nStandardSizes: 9, 15, 25,
37, 51 and 65
nContact Tyco Electronics for
custom configurations
L.025
[.64] Pitch Type
.038
[.97] Typ.
.0125
[.32] Offset
.040
[1.02] Typ.
.075
[1.91] Typ.
.223
[5.66]
.112
[2.84] 2 Plcs.
B
B
.058
[1.47] 2 Plcs.
C
.126
[3.20]
Position ‘Size’
Position 1
Receptacle Assembly, Two Row Dualob
Solder Cup Termination,
Plastic or Metal
1589054
Plug Assembly
Drawing Number 1589053
Receptacle Assembly
Drawing Number 1589054
Dimensions
Size BC L
90.229 [5.82] 0.3085 [7.84] 0.100 [2.54]
15 0.304 [7.72] 0.3835 [9.74] 0.175 [4.45]
25 0.429 [10.90] 0.5085 [12.92] 0.300 [7.62]
37 0.579 [14.71] 0.6585 [16.73] 0.450 [11.43]
51 0.754 [19.15] 0.8335 [21.17] 0.625 [15.88]
65 0.929 [23.60] 1.0085 [25.62] 0.800 [20.32]
Plug
Receptacle
DUALOBE Rectangular Connectors
Part Numbering Guideline for Solder Cup Connectors
166 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Connectors - Solder Cup Termination
SX X XXX 11500 XX X
Positions
005 5 Position (single row only)
009 9 Position
015 15 Position
025 25 Position
037 37 Position
051 51 Position
065 65 Position (two row only)
Type
LLCP (Plastic)
MMetal (Al, Ni Plate)
Rows
S1 Row
T2 Row
Class
SDualobe
Threads/Jackscrew
Threads (Receptacles Only)
NThread for 1.0 mm Jackscrews
QThread for 1.2 mm Jackscrews
Configuration
PC Plug
SC Receptacle
Termination Code
11500 Solder Cup Termination
Jackscrews (Plugs Only)
M1.0 mm Non Captive Jackscrews
N1.0 mm Captive Jackscrews
Q1.2 mm Captive Jackscrews
DUALOBE Rectangular Connectors
Panel Mount Connectors — Single Row, Flying Leads
167
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
Position 1
.223
[5.66]
.166
[4.22]
.062
[1.57]
.050
[1.27]
.086
[2.18] 2 Plcs.
.038
[.97] Typ.
D
A
B
L
C
.043
[1.09] 4 Plcs.
.083
[2.11] 2 Plcs.
Receptacle Assembly,
Panel Mount, Single Row Dualobe,
Flying Leads, Metal Shell
1589851
Product Facts
nMetal Shell
nStandard Sizes: 5, 9, 15,
25, 37 and 51
nFactory wired to your
specifications
nContact Tyco Electronics for
custom configurations
Receptacle Assembly
Drawing Number 1589851
Dimensions
Size A B C D L
50.470 [11.94] 0.233 [5.92] 0.310 [7.87] 0.620 [15.75] 0.100 [2.54]
90.570 [14.48] 0.333 [8.46] 0.410 [10.41] 0.720 [18.29] 0.200 [5.08]
15 0.720 [18.29] 0.483 [12.27] 0.560 [14.22] 0.870 [22.10] 0.350 [8.89]
25 0.970 [24.64] 0.733 [18.62] 0.810 [20.57] 1.120 [28.45] 0.600 [15.24]
37 1.270 [32.26] 1.033 [26.24] 1.110 [28.19] 1.420 [36.07] 0.900 [22.86]
51 1.620 [14.15] 1.383 [35.13] 1.460 [37.08] 1.770 [44.96] 1.250 [31.75]
DUALOBE Rectangular Connectors
Panel Mount Connectors — Two Row, Flying Leads
168 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
.223
[5.66]
.050
[1.27] .062
[1.57]
B
A.038
[.97] Typ.
.040
[1.02] Typ.
.063
[1.60] 2 Plcs.
.058
[1.47] 2 Plcs.
L
C
D
.206
[5.23]
Position ‘Size’
Position 1
Receptacle Assembly,
Panel Mount, Two Row Dualobe,
Flying Leads, Metal Shell
1589050
Product Facts
nMetal Shell
nStandard Sizes: 9, 15, 25,
37, 51 and 65
nContact Tyco Electronics for
custom configurations
Receptacle Assembly
Drawing Number 1589050
Dimensions
Size A B C D L
90.470 [11.94] 0.229 [5.82] 0.310 [7.87] 0.620 [15.75] 0.100 [2.54]
15 0.545 [13.84] 0.304 [7.72] 0.385 [9.78] 0.695 [17.65] 0.175 [4.45]
25 0.670 [17.02] 0.429 [10.90] 0.510 [12.95] 0.820 [20.83] 0.300 [7.62]
37 0.820 [20.83] 0.579 [14.71] 0.660 [16.76] 0.970 [24.64] 0.450 [11.43]
51 0.995 [25.27] 0.754 [19.15] 0.835 [21.21] 1.145 [29.08] 0.625 [15.88]
65 1.170 [20.72] 0.929 [23.60] 1.010 [25.65] 1.320 [33.53] 0.800 [20.32]
Receptacle
DUALOBE Rectangular Connectors
Part Numbering Guideline for Panel Mount Connectors
169
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
169
DUALOBE Connectors - Panel Mount
PX M XXX XX XXX X
Positions
005 5 Position (single row only)
009 9 Position
015 15 Position
025 25 Position
037 37 Position
051 51 Position
065 65 Position (two row only)
Type
MMetal (Al, Ni Plate)
Rows
S1 Row
T2 Row
Class
PPanel Mount
Jackscrew Threads
Threads
NThread for 1.0 mm Jackscrews
QThread for 1.2 mm Jackscrews
Conductor Length
XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches)
CXX A “C” follwed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters)
MXX An “M”followed by two numbers, length is in meters ( i.e. M02 = 2 meters)
Conductor Type
DX White Teflon
DYWhite PTFE per M16878/6
DC Color Coded Teflon
DM Color Coded Teflon per MIL-STD-681
DTWhite Tefzel per M22759/33
GX Teflon Ribbon Cable
SC
Configuration
SC Receptacle
X
Conductor Size/Strands
028 AWG Solid
130 AWG Solid
230 AWG 7 Strand
332 AWG 7 Strand
434 AWG 7 Strand
Wired Connectors
SSL005PC0DC006N 0-1589455-2
SSL005PC0DC012N 0-1589455-3
SSL005PC0DX012M 7-1589456-3
SSL005PC2DC002N 2-1589827-7
SSL005PC2DC004 0-1589455-4
SSL005PC2DC006 0-1589455-5
SSL005PC2DC006N 0-1589455-6
SSL005PC2DC012N 6-1589456-4
SSL005PC2DX006N 0-1589455-7
SSL005SC0DC006N 0-1589457-1
SSL005SC2DC006N 0-1589457-2
SSL005SC2DC012N 7-1589457-6
SSL005SC3DM024N 0-1589457-3
SSL009PC0DC006N 0-1589455-8
SSL009PC0DMM03N 0-1589455-9
SSL009PC0DX012M 7-1589456-4
SSL009PC2DC001N 1-1589455-0
SSL009PC2DC003 1-1589455-1
SSL009PC2DC006N 1-1589455-2
SSL009PC2DC009N 1-1589455-3
SSL009PC2DC012 1-1589455-4
SSL009PC2DC012M 1-1589455-5
SSL009PC2DC012N 1-1589455-6
SSL009PC2DC012Q 9-1589456-2
SSL009PC2DC018N 1-1589455-7
SSL009PC2DC024N 7-1589456-9
SSL009PC2DCC03N 1-1589455-8
SSL009PC2DCC10N 1-1589455-9
SSL009PC2DM010N 2-1589455-0
SSL009PC2DM018M 2-1589455-1
SSL009PC2DMC60Q 2-1589455-2
SSL009SC0DMM03N 0-1589457-4
SSL009SC2DC003 0-1589457-5
SSL009SC2DC006N 0-1589457-6
SSL009SC2DC012 0-1589457-7
SSL009SC2DC012Q 9-1589457-2
SSL009SC2DM006N 0-1589457-8
SSL009SC2GX006 1-1589457-0
SSL015PC0DC012N 0-1589827-6
SSL015PC0DMM03N 2-1589455-3
SSL015PC0DX012M 7-1589456-5
SSL015PC2DC003N 0-1589827-3
SSL015PC2DC006N 2-1589455-4
SSL015PC2DC008N 2-1589455-5
SSL015PC2DC012 2-1589455-6
SSL015PC2DC012M 0-1589827-2
SSL015PC2DC012N 2-1589455-7
SSL015PC2DC016N 0-1589827-8
SSL015PC2DC018 2-1589455-8
SSL015PC2DC018N 1-1589827-1
SSL015PC2DC024 2-1589455-9
SSL015PC2DC024M 7-1589456-2
SSL015PC2DC024N 0-1589827-9
SSL015PC2DC036N 0-1589827-5
SSL015PC2DM018M 3-1589455-0
SSL015SC0DMM03N 1-1589457-1
SSL015SC2DC005N 9-1589457-6
SSL015SC2DC006N 1-1589457-2
SSL015SC2DC012N 1-1589457-3
SSL015SC2DC024N 1-1589457-4
SSL015SC2DC036N 8-1589457-9
SSL025PC0DC012M 8-1589456-5
SSL025PC2DC006 3-1589455-1
SSL025PC2DC006N 3-1589455-2
SSL025PC2DC012 3-1589455-3
SSL025PC2DC018N 9-1589456-6
SSL025PC2DC020N 3-1589455-4
SSL025PC2DC024M 0-1589827-1
SSL025PC2DC024N 7-1589456-8
SSL025PC2DM018M 3-1589455-5
SSL025PC2DX012Q 3-1589455-6
SSL025PC2GX006N 3-1589455-7
SSL025SC0DC012N 8-1589457-5
SSL025SC2DC006 1-1589457-5
SSL025SC2DC006N 1-1589457-6
SSL025SC2DC012N 1-1589457-7
SSL025SC2DC036N 8-1589457-8
SSL037PC2DC012N 3-1589455-8
SSL037PC2DC018N 8-1589456-0
SSL037PC2DC024N 3-1589455-9
SSL037PC2DC096N 4-1589455-0
SSL037SC2DC012N 1-1589457-8
SSL051PC0DX012M 7-1589456-6
SSL051PC2DC012N 4-1589455-1
SSM005PC0DC024N 2-1589827-2
SSM005PC0DC036N 7-1589456-0
SSM005PC0DX024N 8-1589456-9
SSM005PC2DC006 4-1589455-2
SSM005PC2DC006N 4-1589455-3
SSM005PC2DC012M 7-1589456-1
SSM005PC2DC012N 4-1589455-4
SSM005PC2DC012Q 6-1589456-3
SSM005PC2DC018N 4-1589455-5
SSM005PC2DC036N 4-1589455-6
SSM005PC2DC040N 4-1589455-7
SSM005PC2DCC20N 9-1589456-7
SSM005PC2DT012N 1-1589827-6
SSM005PC2DX012N 4-1589455-8
SSM005PC2DX018N 4-1589455-9
SSM005PC2DX024N 5-1589455-0
SSM005PC4DX012N 5-1589455-1
SSM005PC4DXM01 5-1589455-2
SSM005SC0DC024N 0-1589901-5
SSM005SC0DC036N 8-1589457-0
SSM005SC0DX024N 9-1589457-0
SSM005SC2DC006N 1-1589457-9
SSM005SC2DC012N 2-1589457-0
SSM005SC2DC012Q 7-1589457-4
SSM005SC2DC018N 2-1589457-1
SSM005SC2DC040N 2-1589457-2
SSM005SC2DT012N 9-1589457-7
SSM005SC2DX024HN 2-1589457-3
SSM005SC4DX012N 2-1589457-4
SSM009PC0DC012N 0-1589827-7
SSM009PC0DC024N 5-1589455-3
SSM009PC0DM024N 5-1589455-4
SSM009PC0DX012N 5-1589455-5
SSM009PC2DC003 5-1589455-6
SSM009PC2DC003N 5-1589455-7
SSM009PC2DC006 5-1589455-8
SSM009PC2DC006N 5-1589455-9
SSM009PC2DC010N 6-1589455-0
SSM009PC2DC012 6-1589455-1
SSM009PC2DC012M 6-1589455-2
SSM009PC2DC012N 6-1589455-3
SSM009PC2DC018 6-1589455-4
SSM009PC2DC018N 6-1589455-5
SSM009PC2DC024 6-1589455-6
SSM009PC2DC024N 6-1589455-7
SSM009PC2DC036N 6-1589455-8
SSM009PC2DC060N 6-1589455-9
SSM009PC2DC084N 8-1589456-8
SSM009PC2DCC10N 7-1589455-0
SSM009PC2DCM01N 7-1589455-1
SSM009PC2DCM02N 8-1589456-7
SSM009PC2DM010N 7-1589455-2
SSM009PC2DM018N 7-1589455-3
SSM009PC2DM024 7-1589455-4
SSM009PC2DM024N 6-1589456-5
SSM009PC2DT012N 1-1589827-7
SSM009PC2DT024N 1-1589827-0
SSM009PC2DX005N 7-1589455-5
SSM009PC2DX006N 7-1589455-6
SSM009PC2DX010N 7-1589455-7
SSM009PC2DX012N 7-1589455-8
SSM009PC2DX018N 7-1589455-9
SSM009PC2DX024N 8-1589455-0
SSM009PC2DY006N 8-1589455-1
SSM009PC3DC018N 8-1589455-2
SSM009SC0DC024N 0-1589901-6
SSM009SC1DC002 2-1589457-5
SSM009SC2DC006HN 2-1589457-6
SSM009SC2DC006N 2-1589457-7
SSM009SC2DC012N 2-1589457-9
SSM009SC2DC018N 3-1589457-0
SSM009SC2DC024N 3-1589457-1
SSM009SC2DC036N 3-1589457-2
SSM009SC2DC060N 8-1589457-3
SSM009SC2DC084N 8-1589457-7
SSM009SC2DM006N 3-1589457-4
SSM009SC2DM012 3-1589457-5
SSM009SC2DT012N 9-1589457-8
SSM009SC2DX012N 3-1589457-6
SSM009SC2DX018N 3-1589457-7
SSM009SC2DX024HN 3-1589457-8
SSM009SC2DX036HN 3-1589457-9
SSM015PC0DC012N 8-1589455-3
SSM015PC0DC018N 8-1589455-4
SSM015PC0DC024N 2-1589827-3
SSM015PC0DMM02N 8-1589455-5
SSM015PC2DC003N 8-1589455-6
SSM015PC2DC006 8-1589455-7
SSM015PC2DC006N 8-1589455-8
SSM015PC2DC008N 8-1589455-9
SSM015PC2DC012 9-1589455-0
SSM015PC2DC012M 6-1589456-6
SSM015PC2DC012N 9-1589455-1
SSM015PC2DC018 9-1589455-2
SSM015PC2DC018N 9-1589455-3
SSM015PC2DC024 2-1589827-8
SSM015PC2DC024N 9-1589455-4
SSM015PC2DC036N 9-1589455-5
SSM015PC2DC048N 9-1589455-6
SSM015PC2DC060N 9-1589455-7
SSM015PC2DM012N 9-1589456-4
SSM015PC2DM024N 9-1589455-8
SSM015PC2DMC20N 9-1589455-9
SSM015PC2DMC30N 3-1589827-0
SSM015PC2DMM02N 0-1589456-1
SSM015PC2DT012N 0-1589456-2
SSM015PC2DX006N 0-1589456-3
SSM015PC2DX006Q 0-1589456-4
SSM015PC2DX008 0-1589456-5
SSM015PC2DX012N 0-1589456-6
SSM015PC2DX024N 0-1589456-7
SSM015PC2DY003N 0-1589456-8
SSM015PC2DY006N 0-1589456-9
SSM015PC2DY012N 1-1589456-0
SSM015PC2GX018N 1-1589456-1
SSM015PC4DX030N 1-1589456-2
SSM015SC0DC012N 4-1589457-0
SSM015SC0DC024N 0-1589901-7
SSM015SC2DC003N 4-1589457-1
SSM015SC2DC006N 4-1589457-2
SSM015SC2DC012N 4-1589457-3
SSM015SC2DC018 4-1589457-4
SSM015SC2DC018N 9-1589457-4
SSM015SC2DC024N 9-1589457-3
SSM015SC2DC036N 4-1589457-5
SSM015SC2DC048N 7-1589457-5
SSM015SC2DM024N 7-1589457-7
SSM015SC2DT012N 9-1589457-9
SSM015SC2DX006N 4-1589457-8
SSM015SC2DX012HN 4-1589457-9
SSM015SC2DX018N 5-1589457-0
SSM015SC2DX024HN 5-1589457-2
SSM015SC2DY012N 5-1589457-3
SSM015SC2DY018N 5-1589457-4
SSM015SC4DX005N 5-1589457-5
SSM025PC0DC024N 2-1589827-4
SSM025PC0DC036N 6-1589456-9
SSM025PC2DC003N 1-1589456-4
SSM025PC2DC006Q 1-1589456-5
SSM025PC2DC010N 1-1589456-6
SSM025PC2DC012 1-1589456-7
SSM025PC2DC012N 1-1589456-8
SSM025PC2DC012Q 8-1589456-1
DUALOBE Rectangular Connectors
Part Number Index Cross Reference
170 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number
Nanonics Tyco
Part Number Part Number
SSM025PC2DC018 1-1589456-9
SSM025PC2DC018N 2-1589456-0
SSM025PC2DC024N 9-1589456-1
SSM025PC2DC025N 2-1589456-1
SSM025PC2DC030N 2-1589456-2
SSM025PC2DC036N 2-1589456-3
SSM025PC2DCC30N 2-1589456-4
SSM025PC2DCC50N 1-1589827-5
SSM025PC2DM018Q 9-1589456-9
SSM025PC2DM024N 8-1589456-3
SSM025PC2DT012N 1-1589827-8
SSM025PC2DX006N 2-1589456-5
SSM025PC2DX012N 2-1589456-6
SSM025PC2DX018N 2-1589456-7
SSM025PC2DX024N 2-1589456-8
SSM025PC2GX006 2-1589456-9
SSM025PC2GX018N 3-1589456-0
SSM025PC3DY006N 3-1589456-1
SSM025PC4DX015N 7-1589456-7
SSM025SC0DC024N 0-1589901-8
SSM025SC0DC036N 7-1589457-9
SSM025SC2DC006N 8-1589457-6
SSM025SC2DC012N 5-1589457-6
SSM025SC2DC018 5-1589457-7
SSM025SC2DC024N 5-1589457-9
SSM025SC2DT012N 0-1589901-1
SSM025SC2DX006N 6-1589457-0
SSM025SC2DX018N 6-1589457-1
SSM025SC2DX024HN 6-1589457-3
SSM025SC2DX024N 8-1589457-1
SSM025SC3DY006N 6-1589457-4
SSM037PC0DC006M 1-1589827-2
SSM037PC0DC009Q 2-1589827-9
SSM037PC0DC024N 2-1589827-5
SSM037PC0DC036N 6-1589456-8
SSM037PC2DC006 3-1589456-2
SSM037PC2DC006N 3-1589456-3
SSM037PC2DC012 3-1589456-4
SSM037PC2DC012N 3-1589456-5
SSM037PC2DC012Q 9-1589456-5
SSM037PC2DC015N 3-1589456-6
SSM037PC2DC018 3-1589456-7
SSM037PC2DC018M 1-1589827-3
SSM037PC2DC018N 3-1589456-8
SSM037PC2DC024N 3-1589456-9
SSM037PC2DCM01N 4-1589456-0
SSM037PC2DM024N 8-1589456-4
SSM037PC2DT012N 1-1589827-9
SSM037PC2DTC30N 9-1589456-8
SSM037PC2DX012Q 4-1589456-2
SSM037PC2DX018N 4-1589456-3
SSM037PC2GXC30N 4-1589456-4
SSM037PC4DX018N 8-1589456-6
SSM037SC0DC024N 0-1589901-9
SSM037SC0DC036N 7-1589457-8
SSM037SC2DC018 6-1589457-5
SSM037SC2DC018N 6-1589457-6
SSM037SC2DC024N 1-1589901-1
SSM037SC2DT012N 0-1589901-2
SSM037SC2DTC30N 9-1589457-5
SSM051PC0DC024N 2-1589827-6
SSM051PC2DC006 4-1589456-5
SSM051PC2DC006N 4-1589456-6
SSM051PC2DC012N 4-1589456-7
SSM051PC2DC018 4-1589456-8
SSM051PC2DC024 4-1589456-9
SSM051PC2DC024N 5-1589456-0
SSM051PC2DC030N 5-1589456-1
SSM051PC2DCC06Q 5-1589456-2
SSM051PC2DCC30N 9-1589456-3
SSM051PC2DM012Q 5-1589456-3
SSM051PC2DM018N 6-1589456-7
SSM051PC2DM024N 5-1589456-4
SSM051PC2DMC10N 5-1589456-5
SSM051PC2DMC30N 5-1589456-6
SSM051PC2DNC06Q 5-1589456-7
SSM051PC2DNC15Q 5-1589456-8
SSM051PC2DT012N 2-1589827-0
SSM051PC2DT018N 2-1589827-1
SSM051PC2DX008 5-1589456-9
SSM051PC2DX012Q 0-1589827-4
SSM051PC2DXM05Q 6-1589456-0
SSM051PC2DY012N 6-1589456-1
SSM051PC2GX012N 6-1589456-2
SSM051SC0DC024N 1-1589901-0
SSM051SC2DC018 6-1589457-7
SSM051SC2DC018N 6-1589457-8
SSM051SC2DNC15Q 6-1589457-9
SSM051SC2DT012N 0-1589901-3
SSM051SC2DT018N 0-1589901-4
SSM051SC2DT021 7-1589457-1
SSM051SC2GX012N 7-1589457-3
STL009PC0DC006N 1-1589788-1
STL009PC0DC036 7-1589788-6
STL009PC0DC036N 7-1589788-5
STL009PC0DM024N 9-1589475-9
STL009PC1DM024N 2-1589788-9
STL009PC2DC012 1-1589472-1
STL009PC2DC012M 6-1589788-9
STL009PC2DC012N 1-1589472-2
STL009PC2DC018 1-1589472-3
STL009PC2DC018M 1-1589472-4
STL009PC2DC018N 1-1589472-5
STL009PC2DC024 3-1589788-7
STL009PC2DC036N 1-1589472-6
STL009PC2DCM01N 5-1589475-3
STL009PC2DCM02N 8-1589788-4
STL009PC2DM010N 1-1589472-7
STL009PC2DM024N 0-1589788-1
STL009PC2DM030N 0-1589788-2
STL009PC2DM048N 3-1589475-0
STL009PC2DX024N 1-1589472-8
STL009PC2GX010N 1-1589472-9
STL009PC3DX024N 2-1589472-0
STL009PC3DX030N 2-1589472-1
STL009SC0DC006N 3-1589777-8
STL009SC0DC012N 8-1589477-3
STL009SC0DC030N 3-1589777-9
STL009SC2DC012 0-1589476-6
STL009SC2DC012N 0-1589476-7
STL009SC2DC018N 8-1589477-4
STL009SC2DC036N 0-1589476-8
STL009SC2DM036N 2-1589777-7
STL009SC3DX024N 0-1589476-9
STL015PC0DC006N 2-1589472-2
STL015PC0DC012Q 2-1589472-3
STL015PC0DMM03N 2-1589472-4
STL015PC1DNC50N 2-1589472-5
STL015PC2DC006 2-1589472-6
STL015PC2DC008 2-1589472-7
STL015PC2DC010N 2-1589472-8
STL015PC2DC012 2-1589472-9
STL015PC2DC012N 3-1589472-0
STL015PC2DC015N 3-1589472-1
STL015PC2DC015Q 8-1589475-1
STL015PC2DC018M 3-1589472-2
STL015PC2DC018N 3-1589475-9
STL015PC2DC030N 3-1589472-3
STL015PC2DC036N 3-1589472-4
STL015PC2DCC10N 3-1589472-5
STL015PC2DM010N 3-1589472-6
STL015PC2DM048N 3-1589475-1
STL015PC2DNC50N 3-1589472-7
STL015PC2DX006N 8-1589475-0
STL015PC2DX010N 3-1589472-8
STL015PC2DX036N 3-1589472-9
STL015PC2DY006N 9-1589475-4
STL015PC2GX040N 4-1589472-0
STL015SC0DMM03N 1-1589476-0
STL015SC2DC005N 8-1589477-5
STL015SC2DC008 1-1589476-1
STL015SC2DC008N 1-1589476-2
STL015SC2DC012N 1-1589476-3
STL015SC2DC018N 1-1589476-4
STL015SC2DC030N 1-1589476-5
STL015SC2DC036N 1-1589476-6
STL015SC2DX010N 1-1589476-7
STL015SC3DX024N 1-1589476-8
STL025PC0DC006N 6-1589475-4
STL025PC0DC012N 3-1589788-3
STL025PC2DC006 4-1589472-1
STL025PC2DC006M 5-1589475-7
STL025PC2DC006N 4-1589472-2
STL025PC2DC010N 4-1589472-3
STL025PC2DC012 4-1589472-4
STL025PC2DC012N 4-1589472-5
STL025PC2DC015N 4-1589472-6
STL025PC2DC015Q 8-1589475-2
STL025PC2DC018 8-1589475-6
STL025PC2DC018M 7-1589788-3
STL025PC2DC018N 4-1589472-7
STL025PC2DC018Q 7-1589788-4
STL025PC2DC020N 4-1589472-8
STL025PC2DC030N 4-1589472-9
STL025PC2DM010N 5-1589472-0
STL025PC2DT024N 6-1589475-2
STL025PC2DY006N 9-1589475-5
STL025PC2GX036 4-1589788-7
STL025PC3DX006N 5-1589472-1
STL025PC3DX030N 9-1589475-2
STL025PC4DX030N 5-1589472-2
STL025SC2DC001N 1-1589476-9
STL025SC2DC006N 2-1589476-0
STL025SC2DC012N 2-1589476-1
STL025SC2DC030N 2-1589476-2
STL025SC2DC036N 2-1589476-3
STL025SC3DC004N 9-1589477-4
STL025SC3DX030N 0-1589777-5
STL037PC2DC010N 5-1589472-3
STL037PC2DC012 5-1589472-4
STL037PC2DC012M 5-1589472-5
STL037PC2DC012N 5-1589472-6
STL037PC2DC012Q 8-1589788-2
STL037PC2DC017N 5-1589472-7
STL037PC2DC018M 5-1589472-8
STL037PC2DC018N 5-1589472-9
STL037PC2DC018Q 2-1589788-4
STL037PC2DC020Q 6-1589472-0
STL037PC2DC024N 3-1589788-0
STL037PC2DC036M 6-1589472-1
STL037PC2DC036N 6-1589472-2
STL037PC2DC040N 6-1589472-3
STL037PC2DCC15N 6-1589472-4
STL037PC2DM010N 6-1589472-5
STL037PC2DM048N 3-1589475-2
STL037PC2DT024N 6-1589475-1
STL037PC2DY006N 9-1589475-6
STL037PC2DY020N 7-1589475-4
STL037PC2GX005N 6-1589472-6
STL037PC3DC001 5-1589788-1
STL037SC2DC012N 2-1589476-4
STL037SC2DC012Q 2-1589476-5
STL037SC2DC030N 2-1589476-6
STL037SC2DC036N 2-1589476-7
STL037SC2DCC15N 2-1589476-8
STL037SC3DC001N 2-1589777-8
STL037SC3DX024N 2-1589476-9
STL051PC0DXC50N 6-1589472-7
STL051PC2DC003N 6-1589472-8
STL051PC2DC006N 6-1589472-9
STL051PC2DC012 7-1589472-0
STL051PC2DC012N 7-1589472-1
STL051PC2DC018 7-1589472-2
STL051PC2DC018N 3-1589788-8
STL051PC2DC018Q 2-1589788-5
STL051PC2DC024N 7-1589472-3
STL051PC2DC036N 7-1589472-4
STL051PC2DC040N 7-1589472-5
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
171
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number
STL051PC2DCC35N 7-1589472-6
STL051PC2DM048N 3-1589475-3
STL051PC2DNC50 7-1589472-7
STL051PC2DT024N 6-1589475-0
STL051SC2DC003N 3-1589476-0
STL051SC2DC012N 3-1589476-1
STL051SC2DC018N 3-1589476-2
STL051SC2DC024N 3-1589476-3
STL051SC2DC036N 0-1589777-1
STL051SC2DC048 3-1589476-4
STL051SC2DX024 3-1589476-5
STL065PC0DC006N 6-1589475-5
STL065PC0DC012N 3-1589788-4
STL065PC0DC036N 7-1589472-8
STL065PC0DC036Q 1-1589788-7
STL065PC2DC006 7-1589472-9
STL065PC2DC006M 5-1589475-8
STL065PC2DC006N 8-1589472-0
STL065PC2DC012N 8-1589472-1
STL065PC2DC018 8-1589472-2
STL065PC2DC018N 8-1589472-3
STL065PC2DC018Q 2-1589788-6
STL065PC2DC024N 8-1589472-4
STL065PC2DC036N 8-1589472-5
STL065PC2DC040N 8-1589472-6
STL065PC2DC072N 8-1589472-7
STL065PC2DCC10N 8-1589472-8
STL065PC2DM018N 8-1589472-9
STL065PC2DM036N 9-1589472-0
STL065PC2DT024N 6-1589475-3
STL065PC2DTC10N 8-1589788-9
STL065PC2GX036Q 9-1589472-1
STL065PC3DM072N 9-1589472-2
STL065SC2DC006N 3-1589476-6
STL065SC2DC012N 3-1589476-7
STL065SC2DC048N 3-1589476-8
STL065SC2DM036N 3-1589476-9
STL065SC3DM072N 4-1589476-0
STM009PC0DC020N 9-1589472-3
STM009PC0DM024N 1-1589788-2
STM009PC0DXC10N 9-1589472-4
STM009PC2DC003N 9-1589472-5
STM009PC2DC004N 9-1589472-6
STM009PC2DC006 9-1589472-7
STM009PC2DC006N 9-1589472-8
STM009PC2DC012 9-1589472-9
STM009PC2DC012M 7-1589788-9
STM009PC2DC012N 0-1589473-1
STM009PC2DC016N 0-1589473-2
STM009PC2DC018N 0-1589473-3
STM009PC2DC019 0-1589473-4
STM009PC2DC020Q 0-1589473-5
STM009PC2DC024 0-1589473-6
STM009PC2DC024N 0-1589473-7
STM009PC2DC024Q 8-1589475-3
STM009PC2DC028N 0-1589473-8
STM009PC2DC030N 0-1589473-9
STM009PC2DC036 1-1589473-0
STM009PC2DC036M 1-1589473-1
STM009PC2DC036N 1-1589473-2
STM009PC2DC060N 5-1589475-4
STM009PC2DC060Q 1-1589473-3
STM009PC2DCC10Q 0-1589788-8
STM009PC2DCC30N 7-1589475-1
STM009PC2DCC40N 1-1589473-4
STM009PC2DCC46N 8-1589788-6
STM009PC2DCC50N 4-1589475-8
STM009PC2DCC90Q 1-1589473-5
STM009PC2DCM01N 1-1589473-6
STM009PC2DCM02N 8-1589788-3
STM009PC2DM012N 1-1589473-7
STM009PC2DM012Q 1-1589473-8
STM009PC2DM018N 1-1589473-9
STM009PC2DM036N 2-1589473-0
STM009PC2DN036M 2-1589473-1
STM009PC2DT006Q 7-1589475-6
STM009PC2DT012N 7-1589788-1
STM009PC2DT018N 2-1589473-2
STM009PC2DT030N 2-1589473-3
STM009PC2DT036N 9-1589475-0
STM009PC2DTC45N 2-1589475-9
STM009PC2DX006Q 3-1589475-8
STM009PC2DX010N 2-1589473-4
STM009PC2DX012N 4-1589788-1
STM009PC2DX024N 2-1589473-5
STM009PC2DXC15Q 2-1589473-6
STM009PC2DXM01Q 8-1589475-4
STM009PC2DY030N 2-1589788-8
STM009PC2GX006 5-1589788-3
STM009PC2GX006N 6-1589788-3
STM009PC2GX012N 3-1589788-2
STM009PC3DM024Q 6-1589475-7
STM009SC0DX012N 4-1589476-1
STM009SC2DC003N 8-1589477-2
STM009SC2DC006 4-1589476-2
STM009SC2DC006HN 4-1589476-3
STM009SC2DC006N 4-1589476-4
STM009SC2DC012HN 4-1589476-5
STM009SC2DC012N 4-1589476-6
STM009SC2DC012Q 4-1589476-7
STM009SC2DC018HM 4-1589476-8
STM009SC2DC018HN 4-1589476-9
STM009SC2DC018N 5-1589476-0
STM009SC2DC024N 5-1589476-1
STM009SC2DC024Q 2-1589777-5
STM009SC2DC036HN 5-1589476-2
STM009SC2DC036N 5-1589476-3
STM009SC2DC048N 5-1589476-4
STM009SC2DC060Q 5-1589476-5
STM009SC2DCC46N 4-1589777-7
STM009SC2DCM01HN 5-1589476-6
STM009SC2DCM01N 9-1589477-1
STM009SC2DCM02N 5-1589476-7
STM009SC2DM012HN 8-1589477-0
STM009SC2DM012Q 2-1589777-0
STM009SC2DM018HN 5-1589476-8
STM009SC2DM036N 5-1589476-9
STM009SC2DT012HN 6-1589476-0
STM009SC2DT012N 6-1589476-1
STM009SC2DT030N 6-1589476-2
STM009SC2DX010N 6-1589476-3
STM009SC2DX012HN 6-1589476-4
STM009SC2DX012N 6-1589476-5
STM009SC2DXC15Q 6-1589476-6
STM009SC2DXM01Q 9-1589477-9
STM015PC0DC036N 5-1589788-4
STM015PC0DCM02Q 2-1589473-9
STM015PC0DM012N 3-1589473-0
STM015PC0DM024N 1-1589788-3
STM015PC2DC003N 3-1589473-6
STM015PC2DC005N 3-1589473-7
STM015PC2DC006N 3-1589473-8
STM015PC2DC012N 3-1589473-9
STM015PC2DC012Q 4-1589473-0
STM015PC2DC016N 4-1589473-1
STM015PC2DC018N 4-1589473-2
STM015PC2DC020Q 4-1589473-3
STM015PC2DC024N 4-1589473-4
STM015PC2DC030N 4-1589473-5
STM015PC2DC036 4-1589473-6
STM015PC2DC036M 4-1589473-7
STM015PC2DC036N 4-1589473-8
STM015PC2DC048N 4-1589473-9
STM015PC2DC060Q 5-1589473-0
STM015PC2DC120N 5-1589473-1
STM015PC2DCC10Q 0-1589788-9
STM015PC2DCC30N 5-1589473-2
STM015PC2DCC90Q 5-1589473-3
STM015PC2DCM01N 5-1589473-4
STM015PC2DM018N 5-1589473-5
STM015PC2DM020N 4-1589788-2
STM015PC2DM024N 5-1589473-6
STM015PC2DM036N 5-1589473-7
STM015PC2DMM01N 5-1589473-8
STM015PC2DT006Q 5-1589473-9
STM015PC2DT012N 6-1589473-0
STM015PC2DT030N 6-1589473-1
STM015PC2DT036N 6-1589473-2
STM015PC2DTC15N 4-1589475-1
STM015PC2DTC22Q 3-1589788-9
STM015PC2DTC45N 6-1589473-3
STM015PC2DTC95Q 2-1589475-8
STM015PC2DX005Q 5-1589788-9
STM015PC2DX010N 6-1589473-4
STM015PC2DX012N 6-1589473-5
STM015PC2DX024N 6-1589473-6
STM015PC2DX030N 6-1589473-7
STM015PC2DX048N 6-1589473-8
STM015PC2DX072N 6-1589788-5
STM015PC2DXC15Q 6-1589473-9
STM015PC2GX004N 7-1589473-0
STM015PC3DM024Q 6-1589475-8
STM015PC3DX024N 7-1589473-1
STM015PC4DX012N 7-1589473-2
STM015PC4DX024N 8-1589475-7
STM015SC0DC012DQ 1-1589777-8
STM015SC0DC036N 2-1589777-9
STM015SC0DM036N 2-1589777-1
STM015SC0DXC10N 6-1589476-7
STM015SC0DXC10Q 6-1589476-8
STM015SC2DC003N 7-1589476-1
STM015SC2DC004HN 7-1589476-2
STM015SC2DC006N 7-1589476-3
STM015SC2DC008HN 7-1589476-4
STM015SC2DC008Q 3-1589777-4
STM015SC2DC012HN 7-1589476-5
STM015SC2DC012N 7-1589476-6
STM015SC2DC015Q 1-1589777-7
STM015SC2DC016N 7-1589476-7
STM015SC2DC018N 7-1589476-8
STM015SC2DC024N 7-1589476-9
STM015SC2DC036N 8-1589476-0
STM015SC2DC036Q 0-1589777-6
STM015SC2DC060Q 8-1589476-1
STM015SC2DCC30N 8-1589476-2
STM015SC2DCC50N 1-1589777-9
STM015SC2DCM01HN 8-1589476-3
STM015SC2DM006N 8-1589476-4
STM015SC2DM010N 1-1589777-4
STM015SC2DM012HN 1-1589777-2
STM015SC2DM024N 4-1589777-0
STM015SC2DM036N 1-1589777-0
STM015SC2DMM01N 8-1589476-5
STM015SC2DT006Q 8-1589476-6
STM015SC2DT012HN 8-1589476-7
STM015SC2DT012N 4-1589777-4
STM015SC2DT030N 8-1589476-8
STM015SC2DTC90Q 8-1589477-1
STM015SC2DX005HN 8-1589476-9
STM015SC2DX006HN 9-1589476-0
STM015SC2DX010N 9-1589476-1
STM015SC2DX012N 9-1589476-2
STM015SC2DX018HN 9-1589476-3
STM015SC2DXC15Q 9-1589476-4
STM015SC4DX012Q 9-1589476-5
STM015SC4DX030N 9-1589476-6
STM015SC4DXC20N 9-1589476-7
STM025PC0DC012N 7-1589473-3
STM025PC0DC036N 5-1589788-5
STM025PC0DC060N 4-1589475-4
STM025PC0DM012N 7-1589473-4
STM025PC0DM024N 1-1589788-4
STM025PC0DM036N 4-1589788-5
STM025PC2DC003 7-1589473-5
STM025PC2DC003N 7-1589473-6
STM025PC2DC004 7-1589473-7
STM025PC2DC006 7-1589473-8
STM025PC2DC006N 7-1589473-9
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
172 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number
Nanonics Tyco
Part Number Part Number
STM025PC2DC006Q 7-1589788-8
STM025PC2DC008N 8-1589473-0
STM025PC2DC010N 8-1589473-1
STM025PC2DC010Q 6-1589788-0
STM025PC2DC012 8-1589473-2
STM025PC2DC012N 8-1589473-3
STM025PC2DC015N 8-1589473-4
STM025PC2DC016N 8-1589473-5
STM025PC2DC018N 8-1589473-6
STM025PC2DC020N 8-1589473-7
STM025PC2DC020Q 8-1589473-8
STM025PC2DC024N 8-1589473-9
STM025PC2DC024Q 9-1589473-0
STM025PC2DC030N 9-1589473-1
STM025PC2DC036M 9-1589473-2
STM025PC2DC036N 9-1589473-3
STM025PC2DC048N 9-1589473-4
STM025PC2DC060N 9-1589473-5
STM025PC2DC060Q 9-1589473-6
STM025PC2DC072N 9-1589473-7
STM025PC2DC084N 7-1589475-9
STM025PC2DC120N 9-1589473-8
STM025PC2DC180N 9-1589473-9
STM025PC2DCC10Q 1-1589788-0
STM025PC2DCC40N 0-1589474-1
STM025PC2DCC46N 8-1589788-7
STM025PC2DCC50N 0-1589474-2
STM025PC2DCC60N 0-1589474-3
STM025PC2DM006Q 0-1589474-4
STM025PC2DM012N 0-1589788-7
STM025PC2DM012Q 0-1589474-5
STM025PC2DM018N 0-1589474-6
STM025PC2DM020N 4-1589788-3
STM025PC2DM024N 0-1589474-7
STM025PC2DM036N 0-1589474-8
STM025PC2DM072Q 1-1589788-6
STM025PC2DT006N 3-1589475-4
STM025PC2DT012M 4-1589475-6
STM025PC2DT012N 0-1589474-9
STM025PC2DT024N 4-1589788-9
STM025PC2DT030N 1-1589474-0
STM025PC2DT036Q 1-1589474-1
STM025PC2DT048Q 1-1589474-2
STM025PC2DT084N 6-1589788-4
STM025PC2DX005 1-1589474-3
STM025PC2DX006N 1-1589474-4
STM025PC2DX006Q 1-1589474-5
STM025PC2DX010N 1-1589474-6
STM025PC2DX012N 1-1589474-7
STM025PC2DX018N 1-1589474-8
STM025PC2DX048N 1-1589474-9
STM025PC2DX072N 6-1589788-6
STM025PC2DY004 2-1589474-0
STM025PC2DY006 2-1589474-1
STM025PC2DY006N 2-1589474-2
STM025PC3DM024Q 6-1589475-9
STM025PC3DX030N 9-1589475-1
STM025PC4DX012M 2-1589474-4
STM025PC4DX012N 2-1589474-5
STM025SC0DC036N 3-1589777-0
STM025SC0DM036N 2-1589777-6
STM025SC2DC003 9-1589476-8
STM025SC2DC004 9-1589476-9
STM025SC2DC006N 0-1589477-1
STM025SC2DC008N 0-1589477-2
STM025SC2DC012HN 0-1589477-3
STM025SC2DC012N 0-1589477-4
STM025SC2DC016N 0-1589477-5
STM025SC2DC018N 0-1589477-6
STM025SC2DC020N 0-1589477-7
STM025SC2DC024N 0-1589477-8
STM025SC2DC036N 0-1589477-9
STM025SC2DC040N 1-1589477-0
STM025SC2DC048HN 1-1589477-1
STM025SC2DC048N 1-1589477-2
STM025SC2DC060HN 1-1589477-3
STM025SC2DC060Q 1-1589477-4
STM025SC2DC084N 9-1589477-8
STM025SC2DC180N 1-1589477-5
STM025SC2DCC46Q 4-1589777-8
STM025SC2DCC60N 1-1589477-6
STM025SC2DM010N 1-1589777-5
STM025SC2DM012HN 1-1589777-3
STM025SC2DM024N 4-1589777-1
STM025SC2DM036N 1-1589777-1
STM025SC2DT012HN 1-1589477-7
STM025SC2DT012N 8-1589477-7
STM025SC2DT030N 1-1589477-8
STM025SC2DX005HN 1-1589477-9
STM025SC2DX006N 2-1589477-0
STM025SC2DX010N 2-1589477-1
STM025SC2DX012N 2-1589477-2
STM025SC2DX018N 2-1589477-3
STM025SC2DY018N 2-1589477-4
STM025SC3DC012N 2-1589477-5
STM025SC3DMC20DQ 2-1589477-6
STM025SC3DX030N 0-1589777-4
STM025SC4DX030N 2-1589477-7
STM037PC0DC009N 2-1589474-6
STM037PC0DC009Q 8-1589788-5
STM037PC0DC036N 5-1589788-6
STM037PC0DM024N 1-1589788-5
STM037PC0DM036N 1-1589788-8
STM037PC0DM060N 2-1589788-1
STM037PC0DXC10N 2-1589474-7
STM037PC2DC001N 6-1589788-7
STM037PC2DC003N 2-1589474-8
STM037PC2DC005N 2-1589474-9
STM037PC2DC006M 3-1589474-0
STM037PC2DC006N 3-1589474-1
STM037PC2DC010Q 6-1589788-1
STM037PC2DC012 3-1589474-2
STM037PC2DC012M 3-1589474-3
STM037PC2DC012N 3-1589474-4
STM037PC2DC012Q 3-1589474-5
STM037PC2DC015N 3-1589474-6
STM037PC2DC015Q 3-1589474-7
STM037PC2DC018 4-1589475-0
STM037PC2DC018N 3-1589474-9
STM037PC2DC020N 4-1589475-2
STM037PC2DC020Q 4-1589474-0
STM037PC2DC024 4-1589474-1
STM037PC2DC024N 4-1589474-2
STM037PC2DC024Q 5-1589475-2
STM037PC2DC030N 4-1589474-3
STM037PC2DC036 4-1589474-4
STM037PC2DC036N 4-1589474-5
STM037PC2DC036Q 4-1589474-6
STM037PC2DC048N 4-1589474-7
STM037PC2DC060Q 4-1589474-8
STM037PC2DC072N 4-1589474-9
STM037PC2DCC20Q 5-1589474-0
STM037PC2DCC50N 5-1589474-1
STM037PC2DCC50Q 8-1589788-8
STM037PC2DCM01Q 5-1589474-2
STM037PC2DM012N 5-1589475-1
STM037PC2DM018N 5-1589474-3
STM037PC2DM020N 4-1589788-4
STM037PC2DM024M 5-1589474-4
STM037PC2DM024N 5-1589474-5
STM037PC2DM036 7-1589788-7
STM037PC2DM036Q 4-1589475-5
STM037PC2DT006N 3-1589475-5
STM037PC2DT012M 4-1589475-7
STM037PC2DT012N 5-1589474-7
STM037PC2DT030N 5-1589474-8
STM037PC2DT036N 6-1589788-8
STM037PC2DT036Q 8-1589788-0
STM037PC2DTC20Q 5-1589788-0
STM037PC2DX006N 5-1589474-9
STM037PC2DX010N 6-1589474-0
STM037PC2DX012N 6-1589474-1
STM037PC2DX024N 6-1589474-2
STM037PC2GX006N 6-1589474-3
STM037PC3DC012N 6-1589474-4
STM037PC3DM024Q 7-1589475-0
STM037SC0DC036N 3-1589777-1
STM037SC0DM036N 3-1589777-7
STM037SC0DM060N 2-1589777-2
STM037SC0DXC10N 2-1589477-8
STM037SC2DC006N 2-1589477-9
STM037SC2DC006Q 3-1589477-0
STM037SC2DC012HN 0-1589777-9
STM037SC2DC012N 3-1589477-1
STM037SC2DC012Q 9-1589477-0
STM037SC2DC015N 3-1589477-2
STM037SC2DC015Q 8-1589477-9
STM037SC2DC018HN 3-1589477-3
STM037SC2DC018N 3-1589477-4
STM037SC2DC020Q 3-1589477-5
STM037SC2DC024N 3-1589477-6
STM037SC2DC036N 3-1589477-7
STM037SC2DC060Q 3-1589477-8
STM037SC2DM010N 1-1589777-6
STM037SC2DM024N 3-1589477-9
STM037SC2DM036Q 8-1589477-6
STM037SC2DT008N 9-1589477-5
STM037SC2DT012N 8-1589477-8
STM037SC2DT020Q 2-1589777-3
STM037SC2DT030N 4-1589477-0
STM037SC2DTC20Q 2-1589777-4
STM037SC2DX006N 4-1589477-1
STM037SC2DX010N 4-1589477-2
STM037SC2DX012N 4-1589477-3
STM037SC2GX006N 4-1589477-4
STM051PC0DC012N 6-1589474-5
STM051PC0DC036N 5-1589788-7
STM051PC0DC048N 6-1589474-6
STM051PC0DM036N 1-1589788-9
STM051PC0DM060N 2-1589788-2
STM051PC0DXC10N 6-1589474-7
STM051PC1DXC20 6-1589474-8
STM051PC2DC003N 6-1589474-9
STM051PC2DC006 7-1589474-0
STM051PC2DC006N 7-1589474-1
STM051PC2DC012N 7-1589474-2
STM051PC2DC012Q 7-1589474-3
STM051PC2DC015N 7-1589474-4
STM051PC2DC015Q 2-1589788-0
STM051PC2DC016N 7-1589474-5
STM051PC2DC018 7-1589474-6
STM051PC2DC018N 7-1589474-7
STM051PC2DC018Q 7-1589474-8
STM051PC2DC024 6-1589475-6
STM051PC2DC024N 7-1589474-9
STM051PC2DC030N 8-1589474-0
STM051PC2DC036N 8-1589474-1
STM051PC2DC036Q 8-1589474-2
STM051PC2DC060N 8-1589474-3
STM051PC2DC060Q 8-1589474-4
STM051PC2DCC20N 8-1589474-5
STM051PC2DCC30N 9-1589475-7
STM051PC2DCC50N 3-1589788-5
STM051PC2DCC50Q 3-1589788-6
STM051PC2DM018N 8-1589474-6
STM051PC2DM024N 7-1589788-0
STM051PC2DMM01N 8-1589474-7
STM051PC2DT012N 8-1589474-9
STM051PC2DT018N 7-1589788-2
STM051PC2DT030N 9-1589474-0
STM051PC2DT036N 9-1589474-1
STM051PC2DT036Q 8-1589788-1
STM051PC2DT072N 9-1589474-2
STM051PC2DX012N 9-1589474-3
STM051PC2DX012Q 9-1589474-4
STM051PC2DX015N 9-1589474-5
STM051PC2DX018 9-1589474-6
STM051PC2DX018N 9-1589474-7
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
173
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number
Jumper Assemblies
JSL005PP2DC002N 1-1589735-5
JSL009PP2DC006N 0-1589735-8
JSL009PP2DX003N 7-1589671-1
JSL009PP2DX006N 0-1589735-7
JSL009PR2DC012N 7-1589671-2
JSL009RR2DX0.5N 7-1589671-3
JSL015PD2DX002N 4-1589699-8
JSL015PP2DX001N 0-1589735-2
JSL015PP2DX006N 7-1589671-4
JSL025PP2DC012N 0-1589735-1
JSL037PD2GXC02N 7-1589671-5
JSL037PR2DX002N 7-1589671-6
JSL037PR2DX003N 0-1589736-2
JSL051PD2GXC10N 7-1589671-7
JSL051PD2GXC17N 7-1589671-8
JSL051PD2GXC22N 7-1589671-9
JSL051PD2GXC30N 8-1589671-0
JSL051PD2GXC75N 8-1589671-1
JSL051PD2GXC80N 8-1589671-2
JSL051PP2DC004N 8-1589671-3
JSL051PP2GXC10N 8-1589671-4
JSL051PP2GXC15N 8-1589671-5
JSL051PP2GXC17N 8-1589671-6
JSL051PP2GXC22N 8-1589671-7
JSL051PP2GXC75N 8-1589671-8
JSL051PP2GXC80N 8-1589671-9
JSL051PR2GX002 0-1589736-4
JSM005PP2DC002N 9-1589671-0
JSM005PP2DC003N 1-1589735-0
JSM005PP2DC005N 0-1589735-9
JSM005PP2DC008 0-1589735-3
JSM005PP2DC02.5N 0-1589735-5
JSM005PP2DC072 0-1589735-4
JSM005PP2DT150N 9-1589671-1
JSM009PP2DC002N 9-1589671-5
JSM009PP2DC003N 9-1589671-6
JSM009PP2DC006N 1-1589735-2
JSM009PP2DC024N 9-1589671-7
JSM009PP2DM005Q 0-1589735-6
JSM009PR2DC002N 9-1589671-8
JSM009PR2DC006N 9-1589671-9
JSM015PD2DCC02N 0-1589672-6
JSM015PD2GXC05N 0-1589797-3
JSM015PP2DC004N 1-1589735-1
JSM015PP2DC006N 1-1589735-3
JSM015PP2GX001N 0-1589799-3
JSM015PP2GX002N 0-1589799-2
JSM015PP2GX006N 0-1589799-1
JSM015PP2GX014N 0-1589672-7
JSM015PP2GX018N 0-1589672-8
JSM015PR2DC001N 0-1589672-9
JSM015PR2DC002N 1-1589672-0
JSM015PR2DC003N 1-1589672-1
JSM015PR2DC004N 4-1589699-9
JSM015PR2DC006N 1-1589672-2
JSM015PR2DX003N 0-1589736-1
JSM025PP2DC006N 1-1589735-4
JSM025PP2DX004N 2-1589672-0
JSM025PP2DX008N 2-1589672-1
JSM025PP2DXC17N 2-1589672-2
JSM025PP2GX003N 2-1589672-3
JSM025PP2GX024N 2-1589672-4
JSM025PP4DXC20N 2-1589672-5
JSM025PR2DC006N 2-1589672-6
JSM025PR2DC1.5N 5-1589699-5
JSM025PR2GX002N 2-1589672-7
JSM025RR2DC006N 0-1589803-1
JSM037PD2GXC02N 0-1589797-2
JSM037PD2GXC05N 0-1589797-1
JSM037PD2GXC10N 3-1589672-3
JSM037PP2DCC06Q 3-1589672-4
JSM037PP2DCC08Q 3-1589672-5
JSM037PP2DX018N 3-1589672-6
JSM037PP2GX072N 3-1589672-7
JSM037PR2DTC03N 0-1589736-3
JSM051PD2GXC10N 4-1589672-7
JSM051PD2GXC12 4-1589672-8
JSM051PD2GXC12N 4-1589672-9
JSM051PD2GXC15N 5-1589672-0
JSM051PD2GXC17N 5-1589672-1
JSM051PD2GXC50N 5-1589672-2
JSM051PP2DCC12Q 5-1589672-3
JSM051PP2GXC12 5-1589672-4
JSM051PP2GXC12N 5-1589672-5
JSM051PP2GXC17N 5-1589672-6
JSM051PP2GXC22N 5-1589672-7
JSM051PP2GXC50N 5-1589672-8
JSM051PP2GXC75N 5-1589672-9
JSM051PP2GXC80N 6-1589672-0
JSM051PR2DC1.5N 5-1589699-6
JSM051PR2GX002N 6-1589672-1
JTL009PD2GX006N 3-1589729-8
JTL009PD2GX012N 7-1589699-3
JTL009PD2GX018N 3-1589729-9
JTL009PP2DC012N 0-1589737-3
JTL009PP2DX006N 1-1589737-7
JTL009PR2DC018N 5-1589699-8
JTL015PP2DX002N 0-1589737-1
JTL015PP2DX006N 1-1589737-6
JTL015PP2DX008M 9-1589672-5
JTL015PP2DX014N 5-1589699-0
JTL015PR0DC011N 1-1589738-3
JTL015PR2DX008 9-1589672-6
JTL025PD2DC010N 5-1589699-9
JTL025PD2DC1.25N 5-1589699-7
JTL025PP2DC001M 4-1589737-3
JTL025PP2DC001N 4-1589737-2
JTL025PP2DC036N 9-1589672-8
JTL025PP2DCC05N 0-1589737-5
JTL025PP2DCC07N 9-1589672-9
JTL025PP2DX002N 0-1589673-1
JTL025PP2DX003N 0-1589673-2
JTL025PP2DX010N 0-1589673-3
STM051PC2DY015N 9-1589474-8
STM051PC2GX006N 3-1589475-6
STM051PC2GX012N 3-1589788-1
STM051PC2GXM01N 9-1589474-9
STM051SC0DC036N 3-1589777-2
STM051SC0DXC10N 4-1589477-5
STM051SC1DXC20 4-1589477-6
STM051SC2DC003N 4-1589477-7
STM051SC2DC006 4-1589477-8
STM051SC2DC006N 4-1589477-9
STM051SC2DC008Q 3-1589777-5
STM051SC2DC012N 5-1589477-0
STM051SC2DC015HN 5-1589477-1
STM051SC2DC015N 5-1589477-2
STM051SC2DC016N 5-1589477-3
STM051SC2DC018HN 5-1589477-4
STM051SC2DC018N 5-1589477-5
STM051SC2DC018Q 5-1589477-6
STM051SC2DC036N 5-1589477-7
STM051SC2DC036Q 0-1589777-7
STM051SC2DC060N 5-1589477-8
STM051SC2DC060Q 5-1589477-9
STM051SC2DM012N 6-1589477-0
STM051SC2DM024N 4-1589777-2
STM051SC2DMM01N 6-1589477-1
STM051SC2DT012N 0-1589777-3
STM051SC2DT018N 4-1589777-5
STM051SC2DT030N 6-1589477-3
STM051SC2DX012N 6-1589477-4
STM051SC2DX015N 6-1589477-5
STM065PC0DC036N 5-1589788-8
STM065PC0DM036N 4-1589788-6
STM065PC0DM060N 2-1589788-3
STM065PC0DMC30Q 9-1589475-8
STM065PC0DMM01Q 4-1589788-8
STM065PC2DC003N 0-1589475-1
STM065PC2DC006 0-1589475-2
STM065PC2DC006N 0-1589475-3
STM065PC2DC008Q 0-1589475-4
STM065PC2DC012N 0-1589475-5
STM065PC2DC012Q 0-1589475-6
STM065PC2DC016M 0-1589475-7
STM065PC2DC016N 0-1589475-8
STM065PC2DC018M 0-1589475-9
STM065PC2DC018N 1-1589475-0
STM065PC2DC018Q 1-1589475-1
STM065PC2DC020N 4-1589475-3
STM065PC2DC024N 1-1589475-2
STM065PC2DC024Q 1-1589475-3
STM065PC2DC030N 1-1589475-4
STM065PC2DC036 5-1589475-6
STM065PC2DC036N 1-1589475-5
STM065PC2DC072N 1-1589475-6
STM065PC2DCC50N 4-1589475-9
STM065PC2DCM01N 7-1589475-7
STM065PC2DCM01Q 8-1589475-9
STM065PC2DM018N 1-1589475-7
STM065PC2DM024N 5-1589475-0
STM065PC2DM036N 6-1589788-2
STM065PC2DMC46N 4-1589788-0
STM065PC2DT012N 8-1589475-5
STM065PC2DT018N 1-1589475-8
STM065PC2DT030N 1-1589475-9
STM065PC2DTC10N 9-1589788-0
STM065PC2DX006N 2-1589475-0
STM065PC2DX018N 2-1589475-1
STM065PC2DX036N 2-1589475-2
STM065PC2DY012N 2-1589475-3
STM065PC2DY012Q 2-1589788-7
STM065PC2DY024N 2-1589475-4
STM065PC2GXM01N 2-1589475-5
STM065PC3DM006N 2-1589475-6
STM065PC3DX024N 2-1589475-7
STM065SC0DC036N 3-1589777-3
STM065SC2DC003N 6-1589477-6
STM065SC2DC006 6-1589477-7
STM065SC2DC006N 6-1589477-8
STM065SC2DC008Q 3-1589777-6
STM065SC2DC012N 6-1589477-9
STM065SC2DC012Q 7-1589477-0
STM065SC2DC015N 7-1589477-1
STM065SC2DC018 7-1589477-2
STM065SC2DC018N 7-1589477-3
STM065SC2DC018Q 7-1589477-4
STM065SC2DC024N 7-1589477-5
STM065SC2DC024Q 7-1589477-6
STM065SC2DC036 9-1589477-3
STM065SC2DC036HN 7-1589477-7
STM065SC2DC036N 7-1589477-8
STM065SC2DC036Q 0-1589777-8
STM065SC2DM024N 4-1589777-3
STM065SC2DT012N 0-1589777-2
STM065SC2DT018N 4-1589777-6
STM065SC2DT030N 7-1589477-9
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
174 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number
Nanonics Tyco
Part Number Part Number
JTL025PR0DC007N 1-1589738-4
JTL025PR2DCM31N 0-1589673-4
JTL037PP2DC012N 4-1589737-0
JTL037PP2DC024N 4-1589737-1
JTL037PP2DC07.5N 0-1589673-5
JTL037PP2DC08.5N 0-1589673-6
JTL037PP2DC09.5N 0-1589673-7
JTL037PP2DM006N 0-1589737-7
JTL037PP2DX002N 0-1589673-8
JTL037PP2DX003N 0-1589673-9
JTL037PP2DX006N 1-1589737-5
JTL037PP2DX012 1-1589673-0
JTL037PP2DX012N 2-1589737-7
JTL037PR2DC012N 3-1589738-0
JTL037PR2DC024N 3-1589738-1
JTL037PR2DT024N 1-1589673-1
JTL037PR2DX001 0-1589738-9
JTL051PP2DC009N 0-1589737-4
JTL051PP2DX002N 1-1589673-4
JTL051PP2DX006N 1-1589673-5
JTL051PP2DX010N 1-1589673-6
JTL051PP2DX024N 1-1589673-7
JTL051PR2DC012N 1-1589738-5
JTL051PR2DC048 1-1589673-8
JTL065PP2DC005N 2-1589737-2
JTL065PP2DC006N 2-1589737-5
JTL065PP2DC012N 2-1589673-3
JTL065PP2DCC05N 2-1589673-4
JTL065PP2DX012N 0-1589737-8
JTL065PR2DX002N 0-1589738-8
JTM009PD2DX003N 3-1589673-1
JTM009PD2DX006N 3-1589673-2
JTM009PP2DC006N 4-1589737-9
JTM009PP2DC012N 4-1589737-8
JTM009PP2DC02.5N 3-1589673-3
JTM009PP2DM004N 1-1589737-0
JTM009PP2DT002N 3-1589673-4
JTM009PP2DT004N 3-1589673-5
JTM009PP2DX006N 3-1589673-6
JTM009PR2DC003Q 1-1589738-9
JTM009PR2DCC50N 3-1589673-7
JTM009PR2DT002M 0-1589738-3
JTM009PR2DX001N 2-1589738-5
JTM015PD2DX006N 0-1589798-1
JTM015PD2GX006N 0-1589798-2
JTM015PD2GX012N 6-1589673-4
JTM015PP2DC006M 6-1589673-5
JTM015PP2DC012M 6-1589673-6
JTM015PP2DC02.5N 6-1589673-7
JTM015PP2DC05.5N 4-1589737-4
JTM015PP2DT004N 6-1589673-8
JTM015PP2DX001N 6-1589673-9
JTM015PP2DX005Q 2-1589737-8
JTM015PP2DX006N 7-1589673-0
JTM015PP2DX009N 7-1589673-1
JTM015PP2DX024N 7-1589673-2
JTM015PP2DY003N 1-1589737-9
JTM015PP2DY011N 2-1589737-0
JTM015PP2DY022N 2-1589737-1
JTM015PR2DC002N 7-1589673-8
JTM015PR2DC003Q 2-1589738-0
JTM015PR2DC012M 7-1589673-9
JTM015PR2DT001N 8-1589673-0
JTM015PR2DT002M 0-1589738-2
JTM015PR2DX001N 2-1589738-6
JTM015PR2DX003N 0-1589738-6
JTM015RR2DC012N 0-1589804-1
JTM025PD2GX002N 0-1589798-3
JTM025PP2DC001N 4-1589737-7
JTM025PP2DC012N 4-1589737-6
JTM025PP2DC018N 3-1589737-3
JTM025PP2DC024N 3-1589737-5
JTM025PP2DC030N 3-1589737-7
JTM025PP2DC035N 5-1589737-0
JTM025PP2DC2.75N 1-1589737-8
JTM025PP2DM024M 3-1589737-2
JTM025PP2DX001N 2-1589674-8
JTM025PP2DX012N 2-1589674-9
JTM025PP2DX018N 3-1589674-0
JTM025PP2DX022N 3-1589674-1
JTM025PP2DX03.8M 3-1589674-2
JTM025PP2DX03.8N 3-1589674-3
JTM025PP2DX040N 2-1589737-4
JTM025PP2DY006 0-1589737-6
JTM025PP2DY006N 3-1589674-4
JTM025PP2DY020N 3-1589674-5
JTM025PP2DY024N 2-1589737-3
JTM025PR0DXC20N 3-1589674-6
JTM025PR0DXC30N 3-1589674-7
JTM025PR2DC003Q 2-1589738-1
JTM025PR2DT001N 3-1589674-8
JTM025PR2DT002M 0-1589738-1
JTM025PR2DT240N 3-1589674-9
JTM025PR2DX0.5N 4-1589674-0
JTM025PR2DX001N 2-1589738-7
JTM025PR2DX003N 0-1589738-5
JTM025PR2DX006Q 4-1589674-1
JTM025PR2DX012N 4-1589674-2
JTM025PR2DX020 4-1589674-3
JTM037PD2DC002N 8-1589674-8
JTM037PD2DC004N 8-1589674-9
JTM037PD2GX012N 9-1589674-0
JTM037PD2GX024N 9-1589674-1
JTM037PP0DM006 9-1589674-2
JTM037PP0DM006N 3-1589737-9
JTM037PP2DC018N 3-1589737-4
JTM037PP2DC024N 3-1589737-6
JTM037PP2DC036N 3-1589737-8
JTM037PP2DC041N 5-1589737-1
JTM037PP2DX001.75N 9-1589674-3
JTM037PP2DX001N 9-1589674-4
JTM037PP2DX002N 0-1589737-9
JTM037PP2DX002Q 3-1589737-0
JTM037PP2DX004N 9-1589674-6
JTM037PP2DX006Q 9-1589674-7
JTM037PP2DX009Q 9-1589674-8
JTM037PP2DX010Q 2-1589737-9
JTM037PP2DX016 9-1589674-9
JTM037PP2DX024N 0-1589675-1
JTM037PP2DX3.5N 2-1589737-6
JTM037PR0DC036M 0-1589675-3
JTM037PR2DC003Q 2-1589738-2
JTM037PR2DC005N 1-1589738-2
JTM037PR2DCC16Q 1-1589738-0
JTM037PR2DT001N 0-1589675-4
JTM037PR2DT002M 0-1589738-4
JTM037PR2DX001 1-1589738-1
JTM037PR2DX001N 0-1589675-5
JTM037PR2DX001Q 1-1589738-6
JTM037PR2DX006Q 1-1589738-7
JTM037PR2GX002 0-1589675-6
JTM037PR2GX003N 0-1589675-7
JTM051PD2DC002N 0-1589798-4
JTM051PD2DT004N 6-1589675-1
JTM051PD2DXC10N 6-1589675-2
JTM051PP2DC001N 4-1589737-5
JTM051PP2DC004N 6-1589675-3
JTM051PP2DC2.5N 7-1589699-4
JTM051PP2DT005 0-1589737-2
JTM051PP2DX001N 6-1589675-4
JTM051PP2DX004N 6-1589675-5
JTM051PP2DX009Q 5-1589737-2
JTM051PP2DX012N 6-1589675-6
JTM051PP2DX036N 1-1589737-3
JTM051PP2DX040N 1-1589737-4
JTM051PP2DX2.5N 6-1589675-7
JTM051PP2DX4.5N 6-1589675-8
JTM051PR0DC036N 2-1589738-9
JTM051PR2DC002N 6-1589675-9
JTM051PR2DC003Q 2-1589738-3
JTM051PR2DC005 7-1589675-0
JTM051PR2DC006Q 2-1589738-4
JTM051PR2DC018N 0-1589738-7
JTM051PR2DT001N 7-1589675-1
JTM051PR2DX002N 7-1589675-2
JTM051PR2GX002 7-1589675-3
JTM051PR2GX006Q 7-1589675-4
JTM051RR2DC003 7-1589675-5
JTM065PD2GX022N 7-1589699-1
JTM065PP2DC004N 1-1589737-2
JTM065PP2DMC10Q 3-1589737-1
JTM065PP2DX002N 0-1589676-1
JTM065PP2DX004N 0-1589676-2
JTM065PP2DX006N 0-1589676-3
JTM065PP2DX007N 0-1589676-4
JTM065PR2DC001N 0-1589676-5
JTM065PR2DC003 0-1589676-6
JTM065PR2DC003N 0-1589676-7
JTM065PR2DX001N 2-1589738-8
JTM065PR2DX004N 0-1589676-8
JTM065PR2DX004Q 1-1589738-8
JTM065PR2GX001N 0-1589676-9
JTM065RR2DC003 1-1589676-0
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
175
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number
Surface Mount
SSL005L2AN 0-1589462-5
SSL005L2HN 0-1589462-6
SSL009B2H 0-1589700-2
SSL009L2AN 0-1589462-7
SSL009L2AQ 0-1589462-8
SSL009L2HN 0-1589462-9
SSL009L42HN 0-1589463-1
SSL009L43KN 0-1589464-1
SSL009L4CN 0-1589463-2
SSL009L4KN 0-1589463-3
SSL015L2AN 1-1589462-0
SSL015L2AQ 1-1589462-1
SSL015L2CN 1-1589462-2
SSL015L2H 1-1589462-3
SSL015L2HN 1-1589462-4
SSL015L4N 0-1589463-4
SSL015L4PQ 2-1589463-6
SSL025B2 0-1589460-1
SSL025L23N 1-1589462-5
SSL025L2AN 1-1589462-6
SSL025L2HN 1-1589462-7
SSL025L42 0-1589463-5
SSL037B2H 0-1589700-3
SSL037B2N 0-1589460-4
SSL037L2HN 1-1589462-8
SSL037L43KN 0-1589464-2
SSL051B2 0-1589460-5
SSL051L2CN 1-1589462-9
SSL051L2HN 2-1589462-0
SSM005L2HN 2-1589462-1
SSM005L2N 4-1589462-8
SSM005L82HN 0-1589467-3
SSM005L84HN 0-1589467-4
SSM005L85HN 0-1589468-1
SSM009B2H 0-1589700-4
SSM009B2N 0-1589460-7
SSM009L2 2-1589462-2
SSM009L2AN 2-1589462-3
SSM009L2AQ 2-1589462-4
SSM009L2HN 2-1589462-5
SSM009L2N 2-1589462-6
SSM009L2SN 2-1589462-7
SSM009L42KN 0-1589463-6
SSM009L44KN 0-1589463-7
SSM009L44N 0-1589463-8
SSM009L4AQ 2-1589463-7
SSM009L4KN 0-1589463-9
SSM009L85HN 0-1589468-2
SSM015B2N 1-1589460-3
SSM015B45H 0-1589466-1
SSM015H5 0-1589819-1
SSM015L2AN 2-1589462-8
SSM015L2AQ 2-1589462-9
STL065L42KN 2-1589484-0
STL065L44N 2-1589484-1
STL065L4CQ 2-1589484-2
STL065L4KN 2-1589484-3
STL065T5 0-1589814-1
STM009B2N 1-1589490-2
STM009B42N 0-1589485-3
STM009B44Q 1-1589485-5
STM009H2N 0-1589902-4
STM009L23N 2-1589483-9
STM009L2AN 9-1589483-9
STM009L2AQ 8-1589483-2
STM009L2CN 7-1589483-8
STM009L2HN 3-1589483-0
STM009L2N 3-1589483-1
STM009L2SN 3-1589483-2
STM009L42CN 8-1589484-1
STM009L42HN 2-1589484-4
STM009L42KN 2-1589484-5
STM009L44HN 2-1589484-6
STM009L44PQ 2-1589484-7
STM009L44Q 2-1589484-8
STM009L4AQ 2-1589484-9
STM009L4KN 3-1589484-0
STM009L4PQ 3-1589484-1
STM009L84HN 2-1589486-4
STM009L8HN 1-1589486-7
STM015B2N 0-1589490-3
STM015B42N 0-1589485-4
STM015H2N 0-1589902-3
STM015H5Q 0-1589813-1
STM015L23N 3-1589483-4
STM015L2AQ 3-1589483-5
STM015L2CN 7-1589483-7
STM015L2HN 3-1589483-6
STM015L2HQ 3-1589483-7
STM015L2LQ 3-1589483-8
STM015L2N 3-1589483-9
STM015L2SN 4-1589483-0
STM015L42KN 3-1589484-2
STM015L44AQ 3-1589484-3
STM015L44HN 3-1589484-4
STM015L44KN 3-1589484-5
STM015L44Q 3-1589484-6
STM015L4HN 3-1589484-7
STM015L4KN 3-1589484-8
STM015L4PQ 3-1589484-9
STM015L4SN 8-1589484-8
STM015L82CN 3-1589486-0
STM015L82HN 0-1589486-1
STM015L82IQ 1-1589486-3
STM015L82LQ 2-1589486-1
STM015L84AQ 3-1589486-5
STM015L84CN 3-1589486-2
STM015L84HN 2-1589486-5
STM015L84IQ 3-1589486-4
STM015L84KN 0-1589486-2
STL009L44KN 9-1589484-3
STL009L4KN 0-1589484-3
STL009L4N 9-1589484-2
STL015B2N 0-1589490-1
STL015B44N 0-1589485-1
STL015L23N 1-1589483-0
STL015L2AN 1-1589483-1
STL015L2AQ 1-1589483-2
STL015L2CN 1-1589483-3
STL015L2HN 1-1589483-4
STL015L2HQ 8-1589483-7
STL015L2N 8-1589483-6
STL015L423N 0-1589484-4
STL015L42KN 0-1589484-5
STL015L44KN 0-1589484-6
STL015L44N 0-1589484-7
STL015L4CQ 0-1589484-8
STL015L4HN 0-1589484-9
STL015L4KN 1-1589484-0
STL025B2 0-1589490-2
STL025B2N 1-1589490-1
STL025B44M 2-1589485-3
STL025L2AN 1-1589483-5
STL025L2AQ 1-1589483-6
STL025L2CN 8-1589483-9
STL025L2HN 1-1589483-7
STL025L2HQ 8-1589483-8
STL025L2JN 1-1589483-8
STL025L42KN 1-1589484-1
STL025L44KN 9-1589484-4
STL025L44N 1-1589484-2
STL025L4HN 1-1589484-3
STL025L4KN 1-1589484-4
STL025L4PQ 8-1589484-6
STL037B2M 1-1589490-3
STL037B42 0-1589485-2
STL037L23N 1-1589483-9
STL037L2AN 2-1589483-0
STL037L2AQ 2-1589483-1
STL037L2HN 2-1589483-2
STL037L2JN 2-1589483-3
STL037L2KN 9-1589483-7
STL037L2N 8-1589483-5
STL037L42KN 8-1589484-2
STL037L44KN 1-1589484-5
STL037L4HN 1-1589484-6
STL051L2AN 9-1589483-4
STL051L2AQ 2-1589483-4
STL051L2CN 2-1589483-5
STL051L2HN 2-1589483-6
STL051L42KN 1-1589484-7
STL051L4HN 1-1589484-8
STL051L4KN 1-1589484-9
STL051L4PQ 8-1589484-7
STL065L2AQ 9-1589483-0
STL065L2HN 2-1589483-7
STL065L2N 2-1589483-8
SSM015L2CN 3-1589462-0
SSM015L2HN 3-1589462-1
SSM015L2N 4-1589462-7
SSM015L2SN 3-1589462-2
SSM015L44KN 1-1589463-0
SSM015L4KN 1-1589463-1
SSM015L4PQ 1-1589463-2
SSM015L82HN 0-1589467-2
SSM015L84HN 0-1589467-5
SSM015L85HN 0-1589468-3
SSM025B2H 0-1589700-5
SSM025B44N 0-1589465-1
SSM025B45K 0-1589466-2
SSM025L23N 3-1589462-3
SSM025L2AN 3-1589462-4
SSM025L2AQ 3-1589462-5
SSM025L2GQ 4-1589462-9
SSM025L2HN 3-1589462-6
SSM025L2N 5-1589462-2
SSM025L2SN 3-1589462-8
SSM025L42HN 2-1589463-4
SSM025L44HN 1-1589463-3
SSM025L44KN 1-1589463-4
SSM025L44SN 2-1589463-8
SSM025L45KN 0-1589464-3
SSM025L4HN 1-1589463-5
SSM025L4KN 1-1589463-6
SSM025L4PQ 1-1589463-7
SSM025L4SN 1-1589463-8
SSM037B2 0-1589460-9
SSM037B2H 0-1589700-6
SSM037B2N 1-1589460-2
SSM037L2AQ 3-1589462-9
SSM037L2HN 4-1589462-1
SSM037L2IQ 5-1589462-1
SSM037L42IQ 2-1589463-5
SSM037L42KN 1-1589463-9
SSM037L4KN 2-1589463-0
SSM037L82AQ 0-1589467-6
SSM037L84KN 0-1589467-1
SSM037L85PQ 0-1589468-4
SSM051B2H 0-1589700-1
SSM051L2AQ 4-1589462-3
SSM051L2GQ 5-1589462-0
SSM051L2HN 4-1589462-4
SSM051L2IQ 4-1589462-5
SSM051L42KN 2-1589463-1
SSM051L44KN 2-1589463-2
SSM051L4KN 2-1589463-3
STL009L23N 8-1589483-3
STL009L2AQ 9-1589483-2
STL009L2H 0-1589483-8
STL009L2HN 0-1589483-9
STL009L423N 0-1589484-1
STL009L42CN 9-1589484-0
STL009L42HN 8-1589484-4
STL009L42KN 0-1589484-2
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
176 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number
STM015L8HN 3-1589486-7
STM025B2N 0-1589490-4
STM025B42N 0-1589485-5
STM025B44 0-1589485-6
STM025B44N 1-1589485-9
STM025B44Q 1-1589485-7
STM025H2N 0-1589902-2
STM025H44N 0-1589817-1
STM025H5N 0-1589813-2
STM025H5Q 0-1589813-3
STM025L2AN 4-1589483-2
STM025L2AQ 4-1589483-3
STM025L2CN 4-1589483-4
STM025L2HN 4-1589483-5
STM025L2HQ 4-1589483-6
STM025L2IQ 4-1589483-7
STM025L2JN 4-1589483-8
STM025L2N 4-1589483-9
STM025L42CN 7-1589484-9
STM025L42KN 4-1589484-0
STM025L44HM 4-1589484-1
STM025L44HN 4-1589484-2
STM025L44KN 4-1589484-3
STM025L44N 4-1589484-4
STM025L44PQ 4-1589484-5
STM025L44Q 4-1589484-6
STM025L4CN 7-1589484-6
STM025L4KN 4-1589484-7
STM025L4LQ 4-1589484-8
STM025L4PN 4-1589484-9
STM025L4PQ 5-1589484-0
STM025L4SN 5-1589484-1
STM025L82CN 2-1589486-9
STM025L82HN 0-1589486-3
STM025L84CN 3-1589486-3
STM025L84KN 0-1589486-4
STM025L8HN 0-1589486-9
STM037B2H 0-1589480-1
STM037B2M 1-1589490-4
STM037B2N 0-1589490-5
STM037B4 2-1589485-0
STM037B42N 0-1589485-8
STM037B42Q 1-1589485-8
STM037B4N 0-1589485-9
STM037H2N 0-1589902-1
STM037L23N 5-1589483-2
STM037L2AN 5-1589483-3
STM037L2AQ 5-1589483-4
STM037L2CN 8-1589483-1
STM037L2HN 5-1589483-5
STM037L2IQ 9-1589483-1
STM037L2KN 9-1589483-8
STM037L2N 8-1589483-4
STM037L2SN 5-1589483-7
STM037L2TQ 9-1589483-5
STM037L42AQ 9-1589484-7
STM037L42HN 5-1589484-2
SSM009M5LQ 0-1589470-7
SSM009M6AQ 1-1589469-8
SSM009M6CN 1-1589469-9
SSM009M6DQ 2-1589469-0
SSM009M6HN 2-1589469-2
SSM009M6SN 2-1589469-4
SSM015C5N 0-1589461-2
SSM015C6N 0-1589471-4
SSM015M5CN 0-1589470-8
SSM015M5LQ 0-1589470-9
SSM015M6HN 2-1589469-5
SSM015M6SN 2-1589469-6
SSM025C6Q 0-1589471-2
SSM025M5CN 1-1589470-0
SSM025M5HN 1-1589470-1
SSM025M5LQ 1-1589470-2
SSM025M5N 1-1589470-4
SSM025M6AQ 4-1589469-6
SSM025M6DQ 2-1589469-7
SSM025M6HN 2-1589469-8
SSM025M6SN 3-1589469-0
SSM037C5Q 0-1589461-4
SSM037C6N 0-1589471-3
SSM037M6HN 3-1589469-2
SSM037M6HQ 4-1589469-2
SSM037M6SN 3-1589469-3
SSM051C5N 0-1589461-3
SSM051M5CN 1-1589470-3
SSM051M6N 4-1589469-4
SSM051M6SN 3-1589469-4
STL009M5CN 4-1589488-8
STL009M5KN 6-1589488-5
STL009M5L 0-1589488-7
STL009M6CN 6-1589487-1
STL009M6HN 7-1589487-8
STL015C5N 0-1589482-6
STL015M5CN 0-1589488-8
STL015M5KN 6-1589488-6
STL015M5SN 5-1589488-1
STL015M6CN 0-1589487-6
STL015M6HN 6-1589487-4
STL015M6KN 7-1589487-5
STL015M6SN 0-1589487-7
STL025C5N 0-1589482-1
STL025C6N 0-1589481-1
STL025M5 1-1589488-0
STL025M5CN 1-1589488-1
STL025M5KN 5-1589488-2
STL025M6 0-1589487-9
STL025M6D 6-1589487-3
STL025M6DQ 1-1589487-0
STL025M6HN 6-1589487-5
STL025M6KN 7-1589487-6
STL025M6N 1-1589487-1
STL025M6SN 1-1589487-2
STL037M5CN 4-1589488-9
STL037M5LQ 1-1589488-3
STL037M5Q 1-1589488-4
STL037M6HN 6-1589487-6
STL037M6SN 1-1589487-5
STL051M5CN 1-1589488-5
STL051M5KN 5-1589488-4
STL051M6A 1-1589487-6
STL051M6AN 8-1589487-0
STL051M6HN 6-1589487-7
STL051M6IN 8-1589487-1
STL051M6SN 1-1589487-7
STL065M5KN 5-1589488-3
STL065M6HN 8-1589487-2
STL065M6SN 1-1589487-8
STM009C5N 1-1589482-3
STM009C5Q 1-1589482-5
STM009C6N 0-1589481-2
STM009M5AQ 5-1589488-8
STM009M5CN 1-1589488-6
STM009M5DQ 1-1589488-7
STM009M5HN 1-1589488-8
STM009M5LQ 1-1589488-9
STM009M5PQ 5-1589488-9
STM009M5Q 2-1589488-0
STM009M6AN 1-1589487-9
STM009M6AQ 5-1589487-6
STM009M6CN 6-1589487-9
STM009M6DQ 2-1589487-0
STM009M6HN 2-1589487-1
STM009M6IQ 5-1589487-7
STM009M6SN 2-1589487-2
STM015C5N 0-1589482-7
STM015C6N 0-1589481-3
STM015M5AN 2-1589488-1
STM015M5AQ 7-1589488-1
STM015M5CN 2-1589488-2
STM015M5HN 2-1589488-3
STM015M5KN 2-1589488-4
STM015M5LN 2-1589488-5
STM015M5LQ 2-1589488-6
STM015M5PQ 2-1589488-7
STM015M5SN 6-1589488-7
STM015M6AN 2-1589487-3
STM015M6CN 6-1589487-8
STM015M6DQ 2-1589487-4
STM015M6HN 2-1589487-5
STM015M6IQ 5-1589487-8
STM015M6N 2-1589487-6
STM015M6S 2-1589487-7
STM015M6SN 2-1589487-8
STM015M9AN 0-1589489-1
STM015M9HN 0-1589489-3
STM025C5N 0-1589482-2
STM025C5Q 1-1589482-1
STM025C6N 0-1589481-4
STM025M5AQ 6-1589488-4
STM025M5CN 2-1589488-8
STM025M5HN 2-1589488-9
STM025M5LQ 3-1589488-0
STM037L42K 5-1589484-3
STM037L42KN 5-1589484-4
STM037L42PQ 8-1589484-3
STM037L44DQ 8-1589484-0
STM037L44KN 5-1589484-5
STM037L44N 8-1589484-9
STM037L44PQ 5-1589484-6
STM037L44Q 5-1589484-7
STM037L44SN 5-1589484-8
STM037L4CN 7-1589484-7
STM037L4HN 5-1589484-9
STM037L4KN 6-1589484-0
STM037L4PQ 6-1589484-1
STM037L4SN 9-1589484-6
STM037L82AQ 0-1589486-5
STM037L82HN 1-1589486-2
STM037L82PQ 1-1589486-1
STM037L84AQ 1-1589486-6
STM037L84HN 2-1589486-7
STM037L84N 1-1589486-9
STM037L84PQ 3-1589486-6
STM037L84SN 3-1589486-8
STM037L8HN 4-1589486-0
STM051B2H 0-1589480-2
STM051B2N 0-1589490-6
STM051B2Q 0-1589490-8
STM051B42N 1-1589485-0
STM051B4N 2-1589485-2
STM051H5 0-1589813-4
STM051L23N 5-1589483-9
STM051L2AQ 6-1589483-0
STM051L2CN 6-1589483-2
STM051L2HN 6-1589483-3
STM051L2HQ 6-1589483-4
STM051L2IQ 7-1589483-9
STM051L2JN 6-1589483-5
STM051L2Q 6-1589483-6
STM051L2SN 6-1589483-8
STM051L2TQ 9-1589483-6
STM051L42HN 6-1589484-3
STM051L42KN 6-1589484-4
STM051L42N 6-1589484-5
STM051L44HN 6-1589484-6
STM051L44KN 6-1589484-7
STM051L44PQ 6-1589484-8
STM051L44Q 6-1589484-9
STM051L4CN 7-1589484-8
STM051L4HN 9-1589484-1
STM051L4KN 7-1589484-0
STM051L4PQ 7-1589484-1
STM051L4SN 9-1589484-5
STM051L82AQ 3-1589486-9
STM051L82HN 2-1589486-0
STM051L82IQ 1-1589486-5
STM051L82LQ 2-1589486-2
STM051L84HN 2-1589486-8
STM051L8HN 1-1589486-0
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
177
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
DUALOBE Rectangular
Connectors
5
Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number
STM065B2H 0-1589480-3
STM065B2N 1-1589490-0
STM065B2Q 0-1589490-9
STM065B42N 1-1589485-1
STM065B42Q 2-1589485-1
STM065B44 1-1589485-2
STM065B44N 1-1589485-6
STM065B44Q 1-1589485-3
STM065B4Q 1-1589485-4
STM065L23N 7-1589483-0
STM065L2AQ 7-1589483-1
STM065L2CN 7-1589483-2
STM065L2HN 7-1589483-3
STM065L2IQ 8-1589483-0
STM065L2JN 7-1589483-4
STM065L2KN 7-1589483-5
STM065L42HN 7-1589484-2
STM065L42KN 7-1589484-3
STM065L42N 7-1589484-4
STM065L4KN 7-1589484-5
STM065L82AQ 0-1589486-6
STM065L82HN 0-1589486-7
STM065L82IQ 1-1589486-4
STM065L82LQ 2-1589486-3
STM065L84HN 2-1589486-6
STM065L84IQ 0-1589486-8
STM065L84N 3-1589486-1
STM065L8HN 1-1589486-8
Through-Hole
SSL005M6SN 0-1589469-6
SSL009M5CN 1-1589470-5
SSL009M6A 3-1589469-5
SSL009M6CN 3-1589469-9
SSL009M6D 0-1589469-7
SSL009M6H 0-1589469-8
SSL009M6SN 0-1589469-9
SSL015M5KN 0-1589470-2
SSL015M6A 3-1589469-6
SSL015M6CN 3-1589469-8
SSL015M6D 1-1589469-0
SSL015M6N 1-1589469-1
SSL015M6SN 4-1589469-5
SSL025M5CN 0-1589470-3
SSL025M6A 3-1589469-7
SSL025M6CN 4-1589469-0
SSL025M6D 1-1589469-2
SSL025M6DQ 1-1589469-3
SSL025M6H 1-1589469-4
SSL025M6HN 1-1589469-5
SSL025M6SQ 1-1589469-6
SSL037M5N 0-1589470-4
SSL037M6SN 4-1589469-1
SSM005M6SN 1-1589469-7
SSM009C5Q 0-1589461-1
SSM009C6Q 0-1589471-1
SSM009M5CN 0-1589470-5
SSM009M5HN 0-1589470-6
STM06511500PCN 1-1589053-7
STM06511500SCN 1-1589054-2
STM06511500SCQ 1-1589054-6
Panel Mount
PSM005SC2DC024N 0-1589851-2
PSM009SC2DC060N 0-1589851-1
PTM009SC2DC060N 0-1589050-7
PTM015SC2DC024N 0-1589050-4
PTM015SC2DC060N 0-1589050-5
PTM025SC2DC060N 0-1589050-6
PTM037SC2DC018N 0-1589050-3
PTM065SC2DC018N 0-1589050-2
STM065M5FN 5-1589488-5
STM065M5HN 5-1589488-0
STM065M5IQ 7-1589488-2
STM065M5LQ 4-1589488-6
STM065M5N 4-1589488-7
STM065M5SN 6-1589488-9
STM065M6 5-1589487-0
STM065M6AQ 7-1589487-3
STM065M6CN 5-1589487-1
STM065M6HN 5-1589487-3
STM065M6KN 6-1589487-2
STM065M6SN 5-1589487-4
Flex Term "Duckbill"
STL00911378PC 0-1589066-3
STL00911378PCN 0-1589066-4
STL00911378SCN 0-1589067-1
STL01511378PCN 0-1589066-5
STL02511378PCN 0-1589066-6
STL02511378SCN 0-1589067-2
STL03711378PC 2-1589066-4
STL03711378PCN 0-1589066-7
STL05111378PCN 0-1589066-8
STL05111378SCHN 0-1589067-3
STL06511378PC 0-1589066-9
STL06511378PCN 1-1589066-0
STL06511378SCN 0-1589067-4
STM00911378PCN 1-1589066-1
STM00911378SCN 0-1589067-6
STM01511378PCN 2-1589066-3
STM01511378SCN 0-1589067-7
STM02511378PC 1-1589066-2
STM02511378PCN 1-1589066-3
STM02511378SCN 0-1589067-8
STM03711378PCN 1-1589066-4
STM03711378PCQ 1-1589066-5
STM03711378SCN 1-1589067-2
STM05111378PC 1-1589066-6
STM05111378PCM 1-1589066-7
STM05111378PCN 1-1589066-8
STM05111378PCQ 1-1589066-9
STM05111378SCN 0-1589067-9
STM06511378PC 2-1589066-2
STM06511378PCN 2-1589066-0
STM06511378PCQ 2-1589066-1
STM06511378SCN 1-1589067-0
Solder Cup Termination
SSL00511500PCN 0-1589051-1
SSL00511500SCN 0-1589052-1
SSL00911500PC 0-1589051-2
SSL00911500PCN 0-1589051-3
SSL00911500SCN 0-1589052-2
SSL01511500PCM 0-1589051-4
SSL01511500PCN 0-1589051-5
SSL01511500SCN 0-1589052-3
SSM00511500PC 1-1589051-4
SSM00511500PCH 0-1589051-6
SSM00511500PCN 0-1589051-7
SSM00511500SCN 0-1589052-4
SSM00911500PC 0-1589051-8
SSM00911500PCN 0-1589051-9
SSM00911500SCN 1-1589052-1
SSM01511500PCN 1-1589051-0
SSM01511500SC 0-1589052-5
SSM01511500SCN 1-1589052-0
SSM02511500SCQ 0-1589052-7
SSM03711500PC 1-1589051-1
SSM03711500PCN 1-1589051-2
SSM05111500PCN 1-1589051-3
SSM05111500SCN 0-1589052-8
STL00911500PC 2-1589053-2
STL00911500PCN 0-1589053-1
STL00911500SCN 0-1589054-1
STL01511500PC 2-1589053-1
STL01511500PCN 0-1589053-2
STL01511500SCN 0-1589054-2
STL02511500PC 0-1589053-3
STL02511500PCN 0-1589053-4
STL02511500SC 0-1589054-3
STL03711500PCN 0-1589053-5
STL03711500SCN 0-1589054-4
STL05111500PCN 0-1589053-6
STL06511500PCN 1-1589053-8
STM00911500PCN 0-1589053-7
STM00911500SCN 0-1589054-5
STM01511500PCN 0-1589053-8
STM01511500PCQ 0-1589053-9
STM01511500SCHN 0-1589054-6
STM01511500SCN 0-1589054-7
STM01511500SCQ 1-1589054-4
STM02511500PC 1-1589053-0
STM02511500PCN 1-1589053-1
STM02511500PCQ 2-1589053-3
STM02511500SC 0-1589054-8
STM02511500SCN 0-1589054-9
STM03711500PCN 1-1589053-2
STM03711500PCQ 1-1589053-3
STM03711500SCN 1-1589054-0
STM05111500PCN 1-1589053-4
STM05111500PCQ 1-1589053-5
STM05111500SCN 1-1589054-1
STM05111500SCQ 1-1589054-5
STM06511500PC 1-1589053-6
STM025M5PQ 3-1589488-1
STM025M5SN 3-1589488-2
STM025M6AN 2-1589487-9
STM025M6CN 3-1589487-0
STM025M6DQ 3-1589487-1
STM025M6HN 3-1589487-2
STM025M6IQ 5-1589487-9
STM025M6N 3-1589487-3
STM025M6Q 3-1589487-4
STM025M6SN 3-1589487-5
STM025M9AN 0-1589489-2
STM025M9HN 0-1589489-4
STM037C5 0-1589482-9
STM037C5N 1-1589482-6
STM037C5Q 1-1589482-2
STM037C6N 0-1589481-5
STM037C6Q 0-1589481-9
STM037M5AN 3-1589488-3
STM037M5AQ 5-1589488-7
STM037M5CN 3-1589488-4
STM037M5HN 3-1589488-5
STM037M5N 3-1589488-6
STM037M5PQ 3-1589488-7
STM037M5SN 3-1589488-8
STM037M6AN 3-1589487-6
STM037M6AQ 3-1589487-7
STM037M6CN 7-1589487-9
STM037M6DN 3-1589487-8
STM037M6DQ 3-1589487-9
STM037M6HN 4-1589487-0
STM037M6IQ 6-1589487-0
STM037M6SN 4-1589487-1
STM037M6SQ 4-1589487-2
STM051C5 1-1589482-0
STM051C5N 0-1589482-3
STM051C5Q 0-1589482-4
STM051C6N 0-1589481-6
STM051M5AQ 3-1589488-9
STM051M5CN 4-1589488-0
STM051M5DQ 4-1589488-1
STM051M5LQ 4-1589488-2
STM051M5PQ 4-1589488-3
STM051M5SN 6-1589488-8
STM051M6CN 4-1589487-3
STM051M6DQ 4-1589487-4
STM051M6HN 4-1589487-5
STM051M6N 7-1589487-2
STM051M6PQ 4-1589487-6
STM051M6SN 4-1589487-7
STM051M6SQ 4-1589487-8
STM065C5M 0-1589482-8
STM065C5N 1-1589482-4
STM065C5Q 0-1589482-5
STM065C6 0-1589481-7
STM065C6N 0-1589481-8
STM065M5AQ 7-1589488-0
STM065M5CN 4-1589488-4
DUALOBE Rectangular Connectors
Part Number Index Cross Reference (Continued)
178 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number
Circular Connectors
179
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Circular
Connectors
6
Environmentally Sealed Circular Connectors
Nanonics environmentally
sealed circular offering
represents one of the
industry's smallest and
most reliable connector
designs. These connectors
are ideally suited for appli-
cations wherehigh density
and reliability,and reduced
size and weight areserious
design parameters. Along
with these attributes, they
also meet the immersion
requirements of IP67, more
specifically, one meter of
water for two hours.
Utilizing the same contact
system and materials as
the Dualobe® rectangular
series of connectors, the
circular connectors are
manufactured to the per-
formance specifications of
MIL-DTL-83513.
The plug connectors are
offered in both a quick dis-
connect or threaded cou-
pling configuration, and the
receptacle connectors are
offered in either a flush
mount or panel mount con-
figuration. The quick dis-
connect plug will mate with
both the flush and panel
mount receptacles, while
the threaded coupling plug
will only mate with the
panel mount receptacle.
These connectors are
available in pin counts of
7, 19, and 44. Optional
backshells arealso avail-
able for the plug connec-
tors and the panel mount
receptacle. Ideal for cable-
to-cable or cable-to-panel
applications, Tyco
Electronics can also
accommodate harness
assemblies and custom
configurations.
Specifications
Technical and Performance
Data
Electrical
Contact Resistance –.003 - .008
ohms
Current Rating – 1 amp max. per
contact
Dielectric Withstanding Voltage –
Volts RMS 60 Hz at room ambient condi-
tions. At sea level 500V. At 70,000 ft.
150V.
Insulation Resistance – 5000
megohms min. (@ 500 VDC) at room
ambient conditions.
Magnetic Permeability – 2 mu max.
Temperature Range —-55˚C to
+200˚C
Durability –250 mates/demates
Jam Nut Torque–
7Pos. - 6 in-lbs. max.
19 Pos. - 8 in-lbs. max.
44 Pos. - 10 in-lbs. max.
Coupling Nut Torque –
7Pos. - 6 in-lbs. max.
19 Pos. - 8 in-lbs. max.
44 Pos. - 10 in-lbs. max.
Circular Connectors
180 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Quick Disconnect — Plug Assemblies
Coupling Sleeve
O-Ring Seal
Locking Ring
Position 1
Ø.25
[6.35]
.25
[6.35]
.525
[13.34]
Ø.165
[4.19]
Plug Assembly,
Circular, Quick Disconnect,
Metal, 7 Position
1589055
Product Facts
nMetal Shell
nPositions: 7, 19 and 44
nEnvironmental O-ring seal
nPush-Pull quick-disconnect
coupling
nFactorywired to your
specifications
nContact Tyco Electronics for
custom configurations
O-Ring Seal Coupling Sleeve
Locking Ring
Position 1
Ø .30
[7.62]
Ø .215
[5.46]
.525
[13.34]
.25
[6.35]
Plug Assembly,
Circular, Quick Disconnect,
Metal, 19 Position
1589057
7Position
Drawing Number 1589055
19 Position
Drawing Number 1589057
19Position
Circular Connectors
181
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Circular
Connectors
6
Quick Disconnect — Plug Assemblies (Continued)
.25
[6.35]
.525
[13.34]
Ø.315
[8.00]
Ø.395
[10.03]
Coupling Sleeve
O-Ring Seal
Locking Ring
Position 1
Plug Assembly,
Circular, Quick Disconnect,
Metal, 44 Position
1589059
44 Position
Drawing Number 1589059
Circular Connectors
Quick Disconnect — Plug Assemblies with Backshells
182 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Ø.25
[6.35]
.25
[6.35]
.525
[13.34]
.215
[5.46]
Ø.165
[4.19]
Ø.130
[3.30]
.275
[6.99]
O-Ring Seal Coupling Sleeve
Locking Ring Backshell
Position 1
Plug Assembly, Circular,
Quick Disconnect, Metal,
7 Position w/ Backshell
1589691
Product Facts
nMetal Shell
nPositions: 7, 19 and 44
nEnvironmental O-ring seal
nFactory wired to your
specifications
nBackshell installed at
factory
nContact Tyco Electronics for
custom configurations
.25
[6.35] .215
[5.46]
.525
[13.34] .275
[6.99]
Ø.215
[5.46]
Ø.30
[7.62]
O-Ring Seal Coupling Sleeve
Locking Ring Backshell
Position 1
Plug Assembly, Circular,
Quick Disconnect, Metal,
19 Position w/ Backshell
1589692
Ø.180
[4.57]
7Position
Drawing Number 1589691
19 Position
Drawing Number 1589692
Circular Connectors
Quick Disconnect — Plug Assemblies with Backshells (Continued)
183
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Circular
Connectors
6
.25
[6.35] .265
[6.73]
Ø.240
[6.10]
.525
[13.34]
Ø .395
[10.03]
.325
[8.26]
Ø.315
[8.00]
O-Ring Seal Coupling Sleeve
Locking Ring Backshell
Position 1
Plug Assembly, Circular,
Quick Disconnect, Metal,
44 Position w/ Backshell
1589693
44 Position
Drawing Number 1589693
Circular Connectors
184 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Quick Disconnect — Receptacle Assemblies, Flush Mount
Jam Nut
O-Ring Seal Position 1
.425
[10.80]
.060
[1.52]
Ø.312
[7.92]
.065
[1.65]
.250
[6.35] Max Panel Thickness
.312
[7.92] Hex (Jam Nut)
.204
[5.18]
Receptacle Assembly, Circular,
Flush Mount, Quick Disconnect,
Metal, 7 Position
1589056
Product Facts
nMetal Shell
nPositions: 7, 19 and 44
nBulkhead O-ring seal
nFactory wired to your
specifications
nContact Tyco Electronics for
custom configurations
Jam Nut
.425
[10.80]
.060
[1.52]
Ø.375
[9.53]
.065
[1.65]
.250
[6.35] Max Panel Thickness
O-Ring Seal Position 1
.375
[9.53] Hex (Jam Nut)
.258
[6.55]
Receptacle Assembly, Circular,
Flush Mount, Quick Disconnect,
Metal, 19 Position
1589058
7Position
Drawing Number 1589056
19 Position
Drawing Number 1589058
19Position
Circular Connectors
Quick Disconnect — Receptacle Assemblies, Flush Mount (Continued)
185
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Circular
Connectors
6
.500
[12.7] Hex (Jam Nut)
.375
[9.53]
.258
[6.55]
.250
[6.35] Max Panel Thickness
O-Ring Seal Position 1
Jam Nut
.425
[10.80]
.065
[1.65]
.060
[1.52]
Ø.500
[12.7]
44Position
Drawing Number 1589690
Circular Connectors
Threaded Coupling — Plug Assemblies
186 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Ø.165
[4.19]
.375
[9.53]
.525
[13.34]
Ø.315
[8.00]
Position 1 O-Ring Seal Coupling Nut
Plug Assembly, Circular,
Panel Mount, ThreadedCoupling,
Metal, 7 Position
1589063
Product Facts
nMetal Shell
nPositions: 7, 19 and 44
nEnvironmental O-ring seal
nFactory wired to your
specifications
nContact Tyco Electronics for
custom configurations
.375
[9.53]
Ø.355
[9.02] Ø .215
[5.46]
.525
[13.34]
O-Ring Seal Coupling Nut
Position 1
Plug Assembly, Circular,
Panel Mount, Threaded Coupling,
Metal, 19 Position
1589064
7Position
Drawing Number 1589063
19 Position
Drawing Number 1589064
19Position
Threaded Coupling — Plug Assemblies (Continued)
Circular Connectors
187
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Circular
Connectors
6
O-Ring Seal
Position 1 Coupling Nut
.375
[9.53]
.525
[13.34]
Ø.315
[8.00]
Ø .475
[12.07]
Plug Assembly, Circular,
Threaded Coupling,
Metal, 7 Position
1589065
44 Position
Drawing Number 1589065
Circular Connectors
Threaded Coupling — Plug Assemblies with Backshells
188 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
.275
[6.99]
.525
[13.34]
.215
[5.46]
Ø.25
[6.35]
Ø.130
[3.30]
Ø.315
[8.00] Ø.165
[4.19]
.375
[9.53]
O-Ring Seal Coupling Sleeve
Backshell
Position 1
Plug Assembly, Circular,
Panel Mount, Threaded Coupling,
Metal, 7 Position w/ Backshell
1589686
Product Facts
nMetal Shell
nPositions: 7, 19 and 44
nEnvironmental O-ring seal
nFactory wired to your
specifications
nBackshell installed at
factory
nContact Tyco Electronics for
custom configurations
.275
[6.99]
.215
[5.46]
.525
[13.34]
Ø.215
[5.46]
.375
[9.53]
Ø.30
[7.62]
Ø.180
[4.57]
Ø.355
[9.02]
Position 1 O-Ring Seal
Backshell
Coupling Nut
Plug Assembly, Circular,
Threaded Coupling, Metal,
19 Position w/ Backshell
1589688
7Position
Drawing Number 1589686
19 Position
Drawing Number 1589688
Circular Connectors
Threaded Coupling — Plug Assemblies with Backshells (Continued)
189
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Circular
Connectors
6
.325
[8.26]
Ø.395
[10.03]
Ø.475
[12.07] Ø.315
[8.00]
.375
[9.53] .265
[6.73]
Ø.240
[6.10]
.525
[13.34]
O-Ring Seal
Backshell
Coupling Nut
Position 1
Plug Assembly, Circular,
Threaded Coupling, Metal,
44 Position w/ Backshell
1589694
44 Position
Drawing Number 1589694
Circular Connectors
Threaded Coupling/Quick Disconnect — Receptacle Assemblies, Panel Mount
190 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
.550
[13.97]
.350
[8.89]
.065
[1.65]
Ø.25
[6.35]
.060
[1.52]
O-Ring Seal
Jam Nut
Position 1
.258
[6.55]
.406
[10.31] Hex
Receptacle Assembly, Circular,
Panel Mount, Threaded Coupling/
Quick Disconnect, Metal, 7 Position
1589060
Product Facts
nMetal Shell
nPositions: 7, 19 and 44
nBulkhead O-ring seal
nFactory wired to your
specifications
nPanel Mount receptacle
mates with the Quick
Disconnect Plug and the
Threaded Coupling Plug
nContact Tyco Electronics for
custom configurations
.065
[1.65]
.550
[13.97]
.350
[8.89]
.060
[1.52]
Ø.30
[7.62]
O-Ring Seal
Jam Nut
Position 1
.298
[7.57]
.469
[11.91] Hex
Receptacle Assembly, Circular,
Panel Mount, Threaded Coupling/
Quick Disconnect, Metal, 19 Position
1589061
7Position
Drawing Number 1589060
19 Position
Drawing Number 1589061
19Position
Circular Connectors
Threaded Coupling/Quick Disconnect — Receptacle Assemblies, Panel Mount (Continued)
191
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Circular
Connectors
6
.065
[1.65]
.550
[13.97]
.350
[8.89]
.060
[1.52]
Ø.395
[10.03]
O-Ring Seal
Jam Nut
Position 1
.414
[10.52]
.563
[14.30] Hex
Receptacle Assembly, Circular,
Panel Mount, Threaded Coupling/
Quick Disconnect, Metal, 44 Position
1589062
44 Position
Drawing Number 1589062
Circular Connectors
Threaded Coupling/Quick Disconnect — Panel Mount Recp. Assemblies w/Backshells
192 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
.550
[13.97]
.350
[8.89]
Ø.25
[6.35] Ø.130
[3.30] .215
[5.46]
.065
[1.65]
.060
[1.52]
.275
[6.99]
Position 1
.258
[6.55]
O-Ring Seal
Backshell
Jam Nut
.406
[10.31] Hex
Receptacle Assembly, Circular,
Panel Mount, Threaded Coupling/Quick Disconnect,
Metal, 7 Position w/ Backshell
1589685
Product Facts
nMetal Shell
nPositions: 7, 19 and 44
nBulkhead O-ring seal
nFactory wired to your
specifications
nPanel Mount receptacle
mates with the Quick
Disconnect Plug and the
Threaded Coupling Plug
nContact Tyco Electronics for
custom configurations
.275
[6.99] .550
[13.97]
.350
[8.89]
.065
[1.65]
.215
[5.46]
Ø.30
[7.62] Ø.180
[4.57] .060
[1.52]
O-Ring Seal
Jam Nut
Backshell
Position 1
.298
[7.57]
.469
[11.91] Hex
Receptacle Assembly, Circular,
Panel Mount, Threaded Coupling/Quick Disconnect,
Metal, 19 Position w/ Backshell
1589687
Receptacle Assembly 7 Position
Drawing Number 1589685
Receptacle Assembly 19 Position
Drawing Number 1589687
Circular Connectors
Threaded Coupling/Quick Disconnect — Panel Mount Recp. Assemblies w/Backshells (Continued)
193
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Circular
Connectors
6
.325
[8.26]
.065
[1.65]
.550
[13.97]
.350
[8.89]
.060
[1.52]
Ø.395
[10.03] Ø.240
[6.10]
O-Ring Seal
Backshell Jam Nut
Position 1
.414
[10.52]
.563
[14.30] Hex
Receptacle Assembly, Circular,
Panel Mount, Threaded Coupling/Quick Disconnect,
Metal, 44 Position w/ Backshell
1589695
Receptacle Assembly 44 Position
Drawing Number 1589695
Circular Connectors
Part Numbering Guideline for Environmentally Sealed Circular Connectors
194 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors - Wire Terminations
XXX XX X XX XXX X(X)
Conductor Size/Strands
028 AWG Solid
130 AWG Solid
230 AWG 7 Strand
332 AWG 7 Strand
434 AWG 7 Strand
Configuration
PC Plug
SC Receptacle
Positions
007 7 Position
019 19 Position
044 44 Position
Class/Type
QCM Quick Disconnect, Circular, Metal
TCM Threaded Coupling, Circular, Metal
(TCM leadoff for plug only)
Circular Mounting/Features
Mounting (Receptacles Only)
PPanel Mount
FFlush Mount
Features (Optional)
BBackshell (cannot be used with flush mount)
Conductor Length
XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches)
CXX A “C” follwed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters)
MXX An “M” followed by two numbers, length is in meters ( i.e. M02 = 2 meters)
Conductor Type
DX White Teflon
DY White PTFE per M16878/6
DC Color Coded Teflon
DM Color Coded Teflon per MIL-STD-681
DT White Tefzel per M22759/33
XXX
Circular Connectors
Part Number Index Cross Reference
195
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Circular
Connectors
6
TCM044PC2DC036 0-1589065-8
TCM044PC2DC036B 0-1589694-5
TCM044PC2DC202B 0-1589694-7
TCM044PC2DM036 1-1589065-1
TCM044PC2DM120 1-1589065-6
TCM044PC2DM120B 0-1589694-6
TCM044PC2DMC46 1-1589065-0
Quick Disconnect
QCM007PC2DC003 0-1589055-1
QCM007PC2DC006 0-1589055-2
QCM007PC2DC006B 0-1589691-5
QCM007PC2DC012 0-1589055-3
QCM007PC2DC012B 0-1589691-1
QCM007PC2DC018B 0-1589691-2
QCM007PC2DC020 0-1589055-6
QCM007PC2DC020B 0-1589691-9
QCM007PC2DC028 1-1589055-3
QCM007PC2DC036B 0-1589691-3
QCM007PC2DC040 0-1589055-8
QCM007PC2DC072 0-1589055-9
QCM007PC2DCC20B 0-1589691-6
QCM007PC2DCC30 1-1589055-0
QCM007PC2DCC50B 1-1589691-0
QCM007PC2DCM01 1-1589055-4
QCM007PC2DCM02 1-1589055-8
QCM007PC2DCM03 1-1589055-5
QCM007PC2DMC150 1-1589055-6
QCM007PC2DMC150B 0-1589691-7
QCM007PC2DMC46 1-1589055-1
QCM007PC2DMC50 1-1589055-7
QCM007PC2DMC50B 0-1589691-8
QCM007PC2DX006B 0-1589691-4
QCM007SC2DC003P 0-1589060-1
QCM007SC2DC004P 0-1589060-2
QCM007SC2DC006F 0-1589056-1
QCM007SC2DC006P 0-1589060-3
QCM007SC2DC012P 0-1589060-4
QCM007SC2DC012PB 0-1589685-2
QCM007SC2DC018PB 0-1589685-3
QCM007SC2DC020F 0-1589056-2
QCM007SC2DC020P 1-1589060-1
QCM007SC2DC036P 0-1589060-7
QCM007SC2DC036PB 0-1589685-4
QCM007SC2DCC15F 0-1589056-9
QCM007SC2DCC15P 1-1589060-4
QCM007SC2DCC20F 0-1589056-7
QCM007SC2DCC30F 0-1589056-3
QCM007SC2DCC30P 0-1589060-9
QCM007SC2DM003P 1-1589060-0
QCM007SC2DM006PB 0-1589685-5
QCM007SC2DM050PB 0-1589685-1
QCM007SC2DMC05F 0-1589056-8
QCM007SC2DMC16F 0-1589056-4
QCM007SC2DMC46F 0-1589056-5
QCM007SC2DX006F 0-1589056-6
QCM007SC2DYC15P 1-1589060-2
QCM007SC2DYM02P 1-1589060-5
QCM007SC2DYM1.5P 1-1589060-3
QCM019PC0DC012 0-1589057-1
QCM019PC0DM072B 0-1589692-1
QCM019PC2DC003 0-1589057-3
QCM019PC2DC006 0-1589057-4
QCM019PC2DC006B 0-1589692-3
QCM019PC2DC012 0-1589057-5
QCM019PC2DC020 0-1589057-6
QCM019PC2DC020B 0-1589692-5
QCM019PC2DC120B 0-1589692-2
QCM019PC2DCC10 1-1589057-1
QCM019PC2DMC150 1-1589057-2
QCM019PC2DMC150B 0-1589692-4
QCM019PC2DMC46 0-1589057-8
QCM019PC2DMM01 1-1589057-0
QCM019PC2DXC30 0-1589057-9
QCM019SC0DC012F 0-1589058-1
QCM019SC0DC036P 1-1589061-4
QCM019SC0DCC15P 0-1589061-1
QCM019SC0DM012F 1-1589058-7
QCM019SC0DM072F 0-1589058-2
QCM019SC0DMC30P 1-1589061-2
QCM019SC0DXC15P 0-1589061-2
QCM019SC2DC003F 1-1589058-8
QCM019SC2DC003P 0-1589061-3
QCM019SC2DC006F 0-1589058-3
QCM019SC2DC006P 0-1589061-4
QCM019SC2DC012F 1-1589058-6
QCM019SC2DC012P 0-1589061-5
QCM019SC2DC018F 0-1589058-4
QCM019SC2DC020F 0-1589058-5
QCM019SC2DC020P 0-1589061-6
QCM019SC2DC024P 1-1589061-5
QCM019SC2DC036P 0-1589061-7
QCM019SC2DC180F 1-1589058-4
QCM019SC2DCC30P 0-1589061-8
QCM019SC2DM006PB 0-1589687-2
QCM019SC2DM024P 1-1589061-6
QCM019SC2DM027PB 0-1589687-1
QCM019SC2DM036P 1-1589061-0
QCM019SC2DMC05F 1-1589058-5
QCM019SC2DMC16F 0-1589058-6
QCM019SC2DMC30P 1-1589061-3
QCM019SC2DMC46F 0-1589058-7
QCM019SC2DXC30F 0-1589058-8
QCM019SC2DXC30P 0-1589061-9
QCM019SC4DX006P 1-1589061-1
QCM044PC2DC003 0-1589059-1
QCM044PC2DC006 0-1589059-2
QCM044PC2DC006B 0-1589693-1
QCM044PC2DC012 0-1589059-4
QCM044PC2DC012B 0-1589693-2
QCM044PC2DC020 0-1589059-6
QCM044PC2DC030 0-1589059-7
QCM044PC2DC036 1-1589059-1
QCM044PC2DC040 1-1589059-2
QCM044PC2DC050 1-1589059-0
QCM044PC2DC060B 0-1589693-3
QCM044PC2DC120B 0-1589693-4
QCM044PC2DC180B 0-1589693-5
QCM044SC0DM036P 1-1589062-3
QCM044SC0DM048P 1-1589062-4
QCM044SC0DM060P 1-1589062-5
QCM044SC2DC003P 0-1589062-1
QCM044SC2DC006F 0-1589690-3
QCM044SC2DC006P 0-1589062-2
QCM044SC2DC012F 0-1589690-4
QCM044SC2DC012P 0-1589062-3
QCM044SC2DC018F 0-1589690-5
QCM044SC2DC018P 0-1589062-8
QCM044SC2DC019PB 0-1589695-1
QCM044SC2DC020F 0-1589690-1
QCM044SC2DC020P 1-1589062-2
QCM044SC2DC024F 0-1589690-8
QCM044SC2DC024P 1-1589062-6
QCM044SC2DC036P 0-1589062-5
QCM044SC2DC060F 0-1589690-6
QCM044SC2DC080P 1-1589062-1
QCM044SC2DC180F 0-1589690-2
QCM044SC2DM036P 0-1589062-9
QCM044SC2DM120P 1-1589062-0
QCM044SC2DMC16P 0-1589062-6
QCM044SC2DMC46P 0-1589062-7
QCM044SC2DMC50P 1-1589062-7
QCM044SC3DC012F 0-1589690-7
Threaded Coupling
TCM007PC2DC003 0-1589063-1
TCM007PC2DC006 0-1589063-2
TCM007PC2DC006B 0-1589686-2
TCM007PC2DC012 0-1589063-4
TCM007PC2DC012B 0-1589686-3
TCM007PC2DC018B 0-1589686-4
TCM007PC2DC020 0-1589063-9
TCM007PC2DC036 0-1589063-7
TCM007PC2DCM02 1-1589063-0
TCM007PC2DM003 0-1589063-8
TCM007PC2DM006B 0-1589686-1
TCM007PC2DYC10B 0-1589686-5
TCM007PC2DYM01B 0-1589686-6
TCM019PC0DC036 1-1589064-5
TCM019PC0DCC10 0-1589064-1
TCM019PC0DXC10 0-1589064-2
TCM019PC2DC003 0-1589064-3
TCM019PC2DC006 0-1589064-4
TCM019PC2DC006B 0-1589688-2
TCM019PC2DC012 0-1589064-6
TCM019PC2DC012B 0-1589688-3
TCM019PC2DC020 1-1589064-4
TCM019PC2DC024 0-1589064-8
TCM019PC2DC036 0-1589064-9
TCM019PC2DC060B 0-1589688-4
TCM019PC2DC066 1-1589064-1
TCM019PC2DCC30 1-1589064-2
TCM019PC2DM006B 0-1589688-1
TCM019PC2DM024 1-1589064-6
TCM019PC2DM036 1-1589064-3
TCM044PC0DM036 1-1589065-3
TCM044PC0DM048 1-1589065-4
TCM044PC0DM060 1-1589065-5
TCM044PC2DC003 0-1589065-1
TCM044PC2DC006 0-1589065-2
TCM044PC2DC006B 0-1589694-1
TCM044PC2DC012 0-1589065-4
TCM044PC2DC012B 0-1589694-2
TCM044PC2DC018B 0-1589694-3
TCM044PC2DC019B 0-1589694-4
TCM044PC2DC020 1-1589065-2
TCM044PC2DC020B 0-1589694-8
TCM044PC2DC024 1-1589065-7
Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number
Circular Connectors
Engineering Notes
196 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial Connectors
197
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Coaxial
Connectors
7
Coaxial Connectors
The Nanonics 50 ohm
coaxial connector system
combines the benefits of
the rectangular DUALOBE
connectors while offering
the flexibility to terminate
up to nine coaxial contacts
within the same metal
connector housing.
Further more, with this
unique design, five
signal contacts, terminated
with 30 AWG or smaller
discrete wire, can also be
integrated into this connec-
tor package. These
connectors are typically
used in applications with
frequencies up to
20 GHz.
RG-178 coax coaxial cable
is the standardcable used
on these connectors. The
receptacle coax connector
is also available in a
horizontal surface mount
configuration allowing for
wire to board applications.
Harness assemblies and
custom configurations can
also be accommodated.
Specifications
Technical and Performance
Data
Electrical
Contact Resistance –.003 - .008
ohms
Current Rating – 1 amp max. per
contact
Dielectric Withstanding Voltage –
Volts RMS 60 Hz at room ambient con-
ditions. At sea level 500V. At 70,000 ft.
150V.
Insulation Resistance – 5000
megohms min. (@ 500 VDC) at room
ambient conditions.
Magnetic Permeability – 2 mu max.
Temperature Range —-55˚C to
+125˚C
Outer Coaxial Contacts –BeCu Alloy
plated with gold per MIL-G-45204 over
nickel
Dielectric Insert – Teflon
Braid Termination –Soldered to
outer coaxial contacts with SN63P637
solder
Backpotting –Standard for wire
terminations
Coaxial Connectors
Typical VSWR and Insertion Loss
198 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Note: Insertion Loss of 30 AWG Coax
Cable @ (50 Ohm) is approximately
1.0db/ft. @ 3 GHz. The connector system
with 6" of coax on each side, is better than
1.5db @ 3 GHz.
Coaxial Connectors
50 Ohm Coax Connectors
199
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Coaxial
Connectors
7
.100
[2.54] Pitch .078
[1.98] Typ.
.166
[4.22]
.117
[2.97]
.205
[5.21]
.075
[1.91] 2 Plcs.
D
B
C
.100
[2.54]
Plug Assembly, 1-9 Coax
Only, 50 OHM, Metal
1589070
Product Facts
nMetal Shell
nStandard Sizes: 1-9
nFactorywired to your
specifications
nContact Tyco Electronics for
custom configurations
D
B
.100
[2.54]
.223
[5.66]
.112
[2.84] 2 Plcs.
B
.078
[1.98] Typ.
.166
[4.22]
C
.100
[2.54] Pitch
Receptacle Assembly, 1-9 Coax
Only, 50 OHM, Metal
1589071
Plug Assembly
Drawing Number 1589070
Receptacle Assembly
Drawing Number 1589071
Dimensions
Size B C D No. Coax
10.254 [6.45] 0.335 [8.51] 0.180 [4.57] 1
20.354 [8.99] 0.435 [11.05] 0.280 [7.11] 2
30.454 [11.53] 0.535 [13.59] 0.380 [9.65] 3
40.554 [14.07] 0.635 [16.13] 0.480 [12.19] 4
50.654 [16.61] 0.735 [18.67] 0.580 [14.73] 5
60.754 [19.15] 0.835 [21.21] 0.680 [17.27] 6
70.854 [21.69] 0.935 [23.75] 0.780 [19.81] 7
80.954 [24.23] 1.035 [26.29] 0.880 [22.35] 8
91.054 [26.77] 1.135 [28.83] 0.980 [24.89] 9
Plug
Receptacle
Coaxial Connectors
Part Numbering Guideline for 50 Ohm Coax Connectors
200 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coax Only Connectors - Wire Terminations
CX XX 2 XXX X
Conductor Size
230 AWG
CX Coax, 50 Ohm
Configuration
PC Plug
SC Receptacle
Positions
010 1 Position
020 2 Position
030 3 Position
040 4 Position
050 5 Position
060 6 Position
070 7 Position
080 8 Position
090 9 Position
Class/Type Threads/Jackscrews
Threads (Receptacles Only)
NThread for 1.0 mm Jackscrews
QThread for 1.2 mm Jackscrews
Jackscrews (Plugs Only)
M1.0 mm Non Captive Jackscrews
N1.0 mm Captive Jackscrews
Q1.2 mm Captive Jackscrews
Conductor Length
XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches)
CXX A “C”follwed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters)
MXX An “M”followed by two numbers, length is in meters ( i.e. M02 = 2 meters)
RG
Conductor Type
RG RG 178 Coaxial Cable
XXX
Coaxial Connectors
Horizontal SMT 50 Ohm Coax Connectors
201
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Coaxial
Connectors
7
B
.100
[2.54] Pitch
A
.223
[5.66]
.112
[2.84] 2 Plcs.
.0075
[.19] Typ. .0415
[1.05]
B
.100
[2.54] Pitch .078
[1.98] Typ.
.323
[8.20] Typ. .024
[.61] Typ.
.166
[4.22]
C
Receptacle Assembly,
Horizontal SMT, 1-9 Coax
Only, 50 OHM, Metal
1589072
Product Facts
nMetal Shell
nStandard Sizes: 1-9
nFactory wired to your
specifications
nContact Tyco Electronics for
custom configurations
Receptacle Assembly
Drawing Number 1589072
Dimensions
Size A B C No. Coax
10.0125 [.32] 0.254 [6.45] 0.335 [8.51] 1
20.0625 [1.59] 0.354 [8.99] 0.435 [11.05] 2
30.1125 [2.86] 0.454 [11.53] 0.535 [13.59] 3
40.1625 [4.13] 0.554 [14.07] 0.635 [16.13] 4
50.2125 [5.40] 0.654 [16.61] 0.735 [18.67] 5
60.2625 [6.67] 0.754 [19.15] 0.835 [21.21] 6
70.3125 [7.94] 0.854 [21.69] 0.935 [23.75] 7
80.3625 [9.21] 0.954 [24.23] 1.035 [26.29] 8
90.4125 [10.48] 1.054 [26.77] 1.135 [28.83] 9
Surface Mount
Coaxial Connectors
Part Numbering Guideline for Horizontal SMT 50 Ohm Coax Connectors
202 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coax Only Connectors - SMT Termination
CX XXX X
Positions
010 1 Position
020 2 Position
030 3 Position
040 4 Position
050 5 Position
060 6 Position
070 7 Position
080 8 Position
090 9 Position
Class/Type
CXCoax, 50 ohm Jackscrew Threads
Threads
NThread for 1.0 mm Jackscrews
QThread for 1.2 mm Jackscrews
Mounting Hardware
A1.2 mm x .160”
H1.0 mm x .160”
L2
Configuration
L2 Receptacle, Horizontal SMT
XXX
Coaxial Connectors
50 Ohm Coax with Mixed Signal Connectors
203
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Coaxial
Connectors
7
D
.100
[2.54]
.205
[5.21] .117
[2.97]
.075
[1.91] 2 Plcs.
B
C.078
[1.98] Typ.
.038
[.97] 2 Plcs.
.118
[3.00] 2 Plcs.
.166
[4.22]
.100
[2.54] Pitch
.025
[.64]
.050
[1.27]
Plug Assembly, 1-9 Coax
Only, 50 OHM, 5 Signals,
Metal
1589068
Product Facts
nMetal Shell
nStandard Sizes: 1-9 coaxial
contacts with 5 signal
contacts
nFactory wired to your
specifications
nContact Tyco Electronics for
custom configurations
D
B
.100
[2.54]
.223
[5.66]
.112
[2.84] 2 Plcs.
B
.100
[2.54] Pitch
C
.025
[.64]
.050
[1.27]
.166
[4.22]
.038
[.97] 2 Plcs.
.118
[3.00] 2 Plcs.
.078
[1.98] Typ.
Receptacle Assembly, 1-9 Coax
Only, 50 OHM, 5 Signals,
Metal
1589069
Plug Assembly
Drawing Number 1589068
Receptacle Assembly
Drawing Number 1589069
Dimensions
Size BCDNo. Coax
10.254 [6.45] 0.335 [8.51] 0.180 [4.57] 1
20.354 [8.99] 0.435 [11.05] 0.280 [7.11] 2
30.454 [11.53] 0.535 [13.59] 0.380 [9.65] 3
40.554 [14.07] 0.635 [16.13] 0.480 [12.19] 4
50.654 [16.61] 0.735 [18.67] 0.580 [14.73] 5
60.754 [19.15] 0.835 [21.21] 0.680 [17.27] 6
70.854 [21.69] 0.935 [23.75] 0.780 [19.81] 7
80.954 [24.23] 1.035 [26.29] 0.880 [22.35] 8
91.054 [26.77] 1.135 [28.83] 0.980 [24.89] 9
Plug
Receptacle
Coaxial Connectors
Part Numbering Guideline for 50 Ohm Coax with Mixed Signal Connectors
204 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coax w/ Mixed Signal Connectors - Wire Terminations
CX XX 2 X XXX X
Conductor Size
230 AWG 7 Strand
Configuration
PC Plug
SC Receptacle
Positions
015 1 Position w/ 5 Signals
025 2 Position w/ 5 Signals
035 3 Position w/ 5 Signals
045 4 Position w/ 5 Signals
055 5 Position w/ 5 Signals
065 6 Position w/ 5 Signals
075 7 Position w/ 5 Signals
085 8 Position w/ 5 Signals
095 9 Position w/ 5 Signals
Class/Type
CXCoax, 50 ohm
Threads/Jackscrew
Threads (Receptacles Only)
NThread for 1.0 mm Jackscrews
QThread for 1.2 mm Jackscrews
Jackscrews (Plugs Only)
M1.0 mm Non Captive Jackscrews
N1.0 mm Captive Jackscrews
Q1.2 mm Captive Jackscrews
Conductor Length
XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches)
CXX A “C” follwed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters)
MXX An “M” followed by two numbers, length is in meters ( i.e. M02 = 2 meters)
Conductor Type (Signals)
CColor Coded Teflon
XWhite Teflon
R
Conductor Type (Coax)
RRE-178 Coaxial Cable
XXX
Horizontal SMT Coax
CX010L2AQ 1-1589072-3
CX010L2HN 0-1589072-1
CX020L2HN 1-1589072-2
CX030L23N 0-1589072-2
CX030L23Q 0-1589072-5
CX030L2HN 0-1589072-3
CX040L2AQ 1-1589072-0
CX040L2HN 1-1589072-6
CX050L23Q 0-1589072-6
CX050L2HN 0-1589072-9
CX060L2AQ 1-1589072-1
CX060L2HN 1-1589072-5
CX070L2AQ 1-1589072-4
CX080L2HN 0-1589072-4
Coax with Mixed Signals
CX015PC2RC012 0-1589068-1
CX015PC2RC012N 0-1589068-5
CX015SC2RC012N 0-1589069-1
CX035PC2RC006N 0-1589068-2
CX035PC2RC018N 0-1589068-3
CX035SC2RC006N 0-1589069-2
CX035SC2RC018N 0-1589069-3
CX045PC2RC006N 0-1589068-4
CX045PC2RC036N 0-1589068-9
CX045PC2RC036Q 1-1589068-0
CX045SC2RC006N 0-1589069-4
CX045SC2RC006Q 0-1589069-7
CX055PC2RC006N 0-1589068-6
CX055SC2RC006N 0-1589069-5
CX095PC2RC006N 0-1589068-7
CX095PC2RC036N 0-1589068-8
CX095SC2RC006N 0-1589069-6
Coax Only
CX010PC2RG006N 0-1589070-1
CX010PC2RG018N 0-1589070-2
CX010PC2RG048Q 2-1589070-8
CX010PC2RG072N 0-1589070-3
CX010PC2RGC10Q 2-1589070-1
CX010SC2RG048Q 2-1589071-3
CX020PC2RG018N 0-1589070-4
CX020PC2RG048N 2-1589070-5
CX020PC2RG060N 1-1589070-8
CX020SC2RG012N 2-1589071-0
CX020SC2RG018N 2-1589071-5
CX020SC2RG024N 0-1589071-8
CX020SC2RG024Q 2-1589071-8
CX020SC2RG060N 2-1589071-2
CX030PC2RG006N 0-1589070-5
CX030PC2RG012 0-1589070-6
CX030PC2RG012N 0-1589070-7
CX030PC2RG018N 0-1589070-8
CX030PC2RG020Q 0-1589070-9
CX030PC2RG048N 2-1589070-4
CX030PC2RG060N 2-1589070-6
CX030SC2RG006N 0-1589071-3
CX030SC2RG012 0-1589071-4
CX030SC2RG012N 1-1589071-8
CX030SC2RG060N 2-1589071-1
CX040PC2RG012N 1-1589070-0
CX040PC2RG030N 1-1589070-1
CX040PC2RG039Q 3-1589070-7
CX040PC2RG060N 1-1589070-7
CX040SC2RG012 0-1589071-5
CX040SC2RG024N 0-1589071-7
CX050PC2RG006N 1-1589070-4
CX050SC2RG006N 1-1589071-9
CX060PC2RG012N 3-1589070-8
CX060PC2RG012Q 3-1589070-3
CX060PC2RG018N 3-1589070-5
CX060PC2RG036N 3-1589070-0
CX060PC2RG072N 3-1589070-1
CX060PC2RG144N 3-1589070-2
CX060PC2RGC10Q 2-1589070-0
CX060SC2RG012Q 2-1589071-6
CX070PC2RGC10Q 2-1589070-3
CX080PC2RG006N 2-1589070-2
CX080PC2RG012N 3-1589070-9
CX080PC2RG012Q 3-1589070-4
CX080PC2RG018N 3-1589070-6
CX080PC2RG024N 2-1589070-9
CX080PC2RG036N 1-1589070-5
CX080PC2RG048N 1-1589070-6
CX080PC2RG060N 1-1589070-9
CX080PC2RGC10N 2-1589070-7
CX080SC2RG012N 2-1589071-4
CX080SC2RG012Q 2-1589071-7
CX080SC2RG015N 1-1589071-7
CX080SC2RG024N 0-1589071-9
CX090PC2RG036N 1-1589070-2
CX090SC2RG036N 0-1589071-6
Coaxial Connectors
Part Number Index Cross Reference
205
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Coaxial
Connectors
7
Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number Nanonics Tyco
Part Number Part Number
Coaxial Connectors
Engineering Notes
206 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Strip Connectors
207
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Strip
Connectors
8
Strip Connectors
207
The Nanonics strip connec-
tors are the smallest
connectors in the Nanonics
product line. They are
molded from LCP and are
ideal for applications where
the height and weight of the
connector is a serious
design parameter.Just
.040” in height, these
connectors arewell suited
for low-profile applications.
Standard sizes are 4, 9,
and 15, while 25, 37, and
51 arealso available upon
request. Standard
configurations include
wired, surface mount, or
thru-hole terminations.
Guide pins areavailable for
polarization. Harness
assemblies and custom
configurations can also be
accommodated.
Polarization Polarization of the strips is
accomplished with the use
of optional polarizing guide
posts.
Polarization Position
"T" Shown
Strip Connectors
Wired Connectors — Unshrouded, Flying Leads
208 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
208
.205
[5.21]
Position 1
C
L
.040
[1.02]
Plug Assembly,
Unshrouded Strip,
Flying Leads, Plastic
1589448
.060
[1.52] Typ.
.111
[2.82]
Position 1
C
L
.040
[1.02]
Receptacle Assembly,
Unshrouded Strip,
Flying Leads, Plastic
1589449
Dimensions
Size C L
40.115 [2.92] 0.075 [1.91]
90.240 [6.10] 0.200 [5.08]
15 0.390 [9.91] 0.350 [8.89]
25 0.640 [16.26] 0.600 [15.24]
37 0.940 [23.88] 0.900 [22.86]
51 1.290 [32.77] 1.250 [31.75]
Product Facts
nPlastic Shell
nStandard Sizes: 4, 9, 15,
25, 37 and 51
nFactory wired to your
specifications
nContact Tyco Electronics for
custom configurations
Plug Assembly
Drawing Number 1589448 Receptacle Assembly
Drawing Number 1589449
Strip Connectors
Part Numbering Guideline for Strip Wired Connectors
209
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Strip
Connectors
8
209
Strip Connectors - Wire Terminations
USS XXX X
Positions
004 4 Position
009 9 Position
015 15 Position
025 25 Position
Class/Row/Type
USS Unshrouded, 1 row, strip
Polarization (optional)
Plug contains guide post
Receptacle accepts guide post
Conductor Length
XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches)
CXX A “C” followed by two numbers, length is in centimeters ( i.e. C06=6centimeters)
MXX An“M” followed by two numbers, length is in meters ( i.e. M02 = 2 meters)
XX
Conductor Type
DX White Teflon
DY White PTFE per M16878/6
DCColor Coded Teflon
DM Color Coded Teflon per MIL-STD-681
DT White Tefzel per M22759/33
XXX
Configuration
PC Plug
SC Receptacle
XX
Conductor Size/Strands
028 AWG Solid
130 AWG Solid
230 AWG 7 Strand
332 AWG 7 Strand
434 AWG 7 Strand
X
Polarization (Strip Type Only)
T = One Pin vjjjjjjjj
U=One Pin jvjjjjjjj
V = One Pin jjvjjjjjj
W=Two Pin vjjjjjjvj
Y=Two Pin vjjjjjvjj
Z=Two Pin jvjjjjvjj
Strip Connectors
Surface Mount Connectors — Unshrouded
210 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
210
A
.025
[.64] Pitch
.255
[6.48] Typ.
.020
[.51] Typ.
.205
[5.21]
C
L
Position 1
.040
[1.02]
Plug Assembly, Unshrouded Strip,
Horizontal SMT, Plastic
1589451
Position 1
C
L
A
.025
[.64] Pitch
.111
[2.82] .060
[1.52] Typ.
.020
[.51] Typ.
.161
[4.09] Typ.
Receptacle Assembly, Unshrouded Strip,
Horizontal SMT, Plastic
1589452
.040
[1.02]
Product Facts
nPlastic Shell
nStandard Sizes: 4, 9, 15,
25, 37 and 51
nFactory wired to your
specifications
nContact Tyco Electronics for
custom configurations
nSuggested Pad Layouts are
available on the referenced
drawings on the Tyco
Electronics website
Plug Assembly
Drawing Number 1589451
Receptacle Assembly
Drawing Number 1589452
Dimensions
Size AC L
40.0375 [.95] 0.115 [2.92] 0.075 [1.91]
90.1000 [2.54] 0.240 [6.10] 0.200 [5.08]
15 0.1750 [4.45] 0.390 [9.91] 0.350 [8.89]
25 0.3000 [7.62] 0.640 [16.26] 0.600 [15.24]
37 0.4500 [11.43] 0.940 [23.88] 0.900 [22.86]
51 0.6250 [15.88] 1.290 [32.77] 1.250 [31.75]
Strip Connectors
Thru-Hole Connectors — Unshrouded, Horizontal, 1 Row to 2 Row, .050 Spacing
211
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Strip
Connectors
8
211
.205
[5.21]
C
L
Position 1
.090
[2.29] Typ.
.050
[1.27] Typ.
.255
[1.27] Typ.
.040
[1.02]
Plug Assembly, Unshrouded Strip,
Horizontal Mount, Through Hole,
1 to 2 Row, .050 Spacing
1589453
.111
[2.82]
.060
[1.52] Typ.
.050
[1.27] Typ.
.161
[4.09] Typ.
C
LPosition 1
.090
[2.29] Typ.
.040
[1.02]
Receptacle Assembly, Unshrouded Strip,
Horizontal Mount, Through Hole,
1 to 2 Row, .050 Spacing
1589454
Product Facts
nPlastic Shell
nStandard Sizes: 4, 9, 15,
25, 37 and 51
nFactory wired to your
specifications
nContact Tyco Electronics for
custom configurations
nSuggested Thru-Hole
Layouts are available on
the referenced drawings on
the Tyco Electronics
website
Plug Assembly
Drawing Number 1589453
Receptacle Assembly
Drawing Number 1589454
Dimensions
Size CL
40.115 [2.92] 0.075 [1.91]
90.240 [6.10] 0.200 [5.08]
15 0.390 [9.91] 0.350 [8.89]
25 0.640 [16.26] 0.600 [15.24]
37 0.940 [23.88] 0.900 [22.86]
51 1.290 [32.77] 1.250 [31.75]
Strip Connectors
Part Numbering Guideline for Surface Mount and Thru Hole Termination
212 Catalog 1308885 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Issued 3-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Strip Connectors - Surface Mount and Thru Hole Terminations
USS XX X
Positions
004 4 Position
009 9 Position
015 15 Position
025 25 Position
Class/Row/Type
USS Unshrouded, 1 row, strip
Polarization (optional)
Plug contains guide post
Receptacle accepts guide post
Configuration
B2 Plug, Horizontal SMT
L2 Receptacle, Horizontal SMT
C6Plug, Horizontal Mount, Thru Hole
M6 Receptacle, Horizontal Mount, Thru Hole
XXX
212
Polarization (Strip Type Only)
T= One Pin vjjjjjjjj
U=One Pin jvjjjjjjj
V = One Pin jjvjjjjjj
W=Two Pin vjjjjjjvj
Y=Two Pin vjjjjjvjj
Z=Two Pin jvjjjjvjj
Strip Connectors
Part Number Index Cross Reference
213
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NANONICS Strip
Connectors
8
Wire Terminations
USS004PC2DC003 0-1589448-1
USS004PC2DC006 0-1589448-2
USS004PC2DC006T 5-1589448-5
USS004PC2DC008 6-1589448-8
USS004PC2DC012 0-1589448-3
USS004PC2DC012T 0-1589448-4
USS004PC2DC012U 0-1589448-5
USS004PC2DC024 0-1589448-6
USS004PC2DC036 0-1589448-7
USS004PC2DC036T 0-1589448-8
USS004PC2DCC20T 5-1589448-9
USS004PC2DCC30 0-1589448-9
USS004PC2DCM01 5-1589448-7
USS004PC2DM012T 7-1589448-2
USS004PC2DM024T 7-1589448-6
USS004PC2DMC30 6-1589448-9
USS004PC2DMC40 7-1589448-1
USS004PC2DMC50 6-1589448-7
USS004PC2DMM01 6-1589448-0
USS004PC2DMM02 6-1589448-1
USS004PC2DNC40 1-1589448-0
USS004PC2DX006 1-1589448-1
USS004PC2DX012 1-1589448-2
USS004PC2GX006 1-1589448-3
USS004PC2GX024 1-1589448-4
USS004PC3DC018 1-1589448-5
USS004PC4DXC10 7-1589448-0
USS004SC2DC002 0-1589449-1
USS004SC2DC003 0-1589449-2
USS004SC2DC003T 0-1589449-3
USS004SC2DC004 0-1589449-4
USS004SC2DC006 0-1589449-5
USS004SC2DC006T 6-1589449-2
USS004SC2DC008 8-1589449-0
USS004SC2DC012 0-1589449-6
USS004SC2DC012T 0-1589449-7
USS004SC2DC012U 0-1589449-8
USS004SC2DC024 0-1589449-9
USS004SC2DC036 1-1589449-0
USS004SC2DC048 1-1589449-1
USS004SC2DCC20T 7-1589449-1
USS004SC2DCC30 1-1589449-2
USS004SC2DCM01 6-1589449-7
USS004SC2DM012T 8-1589449-4
USS004SC2DM024T 8-1589449-9
USS004SC2DMC30 8-1589449-1
USS004SC2DMC40 8-1589449-3
USS004SC2DMC50 7-1589449-9
USS004SC2DMM01 7-1589449-2
USS004SC2DMM02 7-1589449-3
USS004SC2DNC40 1-1589449-3
USS004SC2DTC20T 8-1589449-5
USS004SC2DX006 1-1589449-4
USS004SC2DX012T 1-1589449-5
USS004SC2GX006 1-1589449-6
USS004SC2GX024 1-1589449-7
Nanonics Tyco
Part Number Part Number
USS004SC3DC018 1-1589449-8
USS004SC3DX004T 1-1589449-9
USS004SC4DXC30 8-1589449-2
USS009PC0DC006T 1-1589448-6
USS009PC2DC006 1-1589448-7
USS009PC2DC006W 1-1589448-8
USS009PC2DC008U 5-1589448-2
USS009PC2DC012 1-1589448-9
USS009PC2DC012T 2-1589448-0
USS009PC2DC012V 2-1589448-1
USS009PC2DC018V 2-1589448-2
USS009PC2DC024 2-1589448-3
USS009PC2DC036 2-1589448-4
USS009PC2DC036T 2-1589448-5
USS009PC2DC036U 2-1589448-6
USS009PC2DC036V 2-1589448-7
USS009PC2DCC05T 2-1589448-8
USS009PC2DCM01 5-1589448-8
USS009PC2DM012T 7-1589448-5
USS009PC2DM024T 7-1589448-7
USS009PC2DX001 2-1589448-9
USS009PC2DX004T 3-1589448-0
USS009PC2DX006T 3-1589448-1
USS009PC2DX012 3-1589448-2
USS009PC2GX006 3-1589448-3
USS009PC2GX012 3-1589448-4
USS009PC3DC036 6-1589448-5
USS009SC0DC006T 7-1589449-0
USS009SC2DC004 2-1589449-0
USS009SC2DC006 2-1589449-1
USS009SC2DC006W 2-1589449-2
USS009SC2DC006Z 2-1589449-3
USS009SC2DC008 2-1589449-4
USS009SC2DC012 2-1589449-5
USS009SC2DC012T 2-1589449-6
USS009SC2DC012Z 2-1589449-7
USS009SC2DC018 2-1589449-8
USS009SC2DC018T 2-1589449-9
USS009SC2DC018V 6-1589449-3
USS009SC2DC024 3-1589449-0
USS009SC2DC025T 3-1589449-1
USS009SC2DC036T 3-1589449-2
USS009SC2DC036U 3-1589449-3
USS009SC2DC036V 3-1589449-4
USS009SC2DC036W 3-1589449-5
USS009SC2DC060T 3-1589449-6
USS009SC2DCC05T 3-1589449-7
USS009SC2DCM01 6-1589449-8
USS009SC2DCM01T 3-1589449-8
USS009SC2DM012T 8-1589449-8
USS009SC2DM024T 9-1589449-0
USS009SC2DT012T 9-1589449-1
USS009SC2DX004T 3-1589449-9
USS009SC2DX006T 4-1589449-0
USS009SC2DX012 4-1589449-1
USS009SC2GX006 4-1589449-2
USS009SC2GX012 4-1589449-3
Nanonics Tyco
Part Number Part Number
USS009SC3DC036 7-1589449-6
USS009SC3DX004T 4-1589449-4
USS015PC1DC036T 7-1589448-3
USS015PC1DC036W 7-1589448-4
USS015PC2DC006 3-1589448-5
USS015PC2DC012 3-1589448-6
USS015PC2DC012T 3-1589448-7
USS015PC2DC012V 3-1589448-8
USS015PC2DC018 3-1589448-9
USS015PC2DC018V 5-1589448-6
USS015PC2DMC60T 4-1589448-0
USS015PC2DX004T 4-1589448-1
USS015PC2DX012 4-1589448-2
USS015PC2DX024T 4-1589448-3
USS015PC3DC036 6-1589448-6
USS015SC1DC036T 8-1589449-6
USS015SC1DC036W 8-1589449-7
USS015SC2DC006 4-1589449-6
USS015SC2DC012 4-1589449-7
USS015SC2DC012T 4-1589449-8
USS015SC2DC018V 6-1589449-4
USS015SC2DC024T 6-1589449-1
USS015SC2DC036 7-1589449-8
USS015SC2DC036T 4-1589449-9
USS015SC2DMC60T 5-1589449-0
USS015SC2DX004T 5-1589449-1
USS015SC2DX006T 6-1589449-5
USS015SC2DX018T 5-1589449-2
USS015SC3DC036 7-1589449-7
USS015SC3DX004T 5-1589449-3
USS025PC2DC006 4-1589448-4
USS025PC2DC012 6-1589448-2
USS025PC2DT006T 5-1589448-3
USS025PC2DX018T 4-1589448-5
USS025SC2DC006 5-1589449-4
USS025SC2DC012 7-1589449-4
USS025SC2DT006T 5-1589449-9
USS037PC1DXC20 4-1589448-6
USS037PC2DC006 4-1589448-7
USS037PC2DC012 6-1589448-4
USS037PC2DC020T 4-1589448-8
USS037PC2DNC50 4-1589448-9
USS037PC2DT006T 5-1589448-4
USS037SC1DXC20 5-1589449-5
USS037SC1DY006 6-1589449-6
USS037SC2DC006 5-1589449-6
USS037SC2DC012 7-1589449-5
USS037SC2DC036T 6-1589449-9
USS037SC2DT006T 6-1589449-0
USS037SC2DX006T 5-1589449-7
USS051PC2DC012 5-1589448-0
USS051PC2DX012 5-1589448-1
USS051SC2DC012 5-1589449-8
Nanonics Tyco
Part Number Part Number
Surface Mount
USS004B2 0-1589451-1
USS004B2T 0-1589451-2
USS004B4 0-1589775-1
USS004B45T 0-1589450-1
USS004B4T 3-1589683-2
USS004L2 0-1589452-1
USS004L2T 0-1589452-2
USS009B2 0-1589451-3
USS009B2T 0-1589451-5
USS009B2TE 1-1589451-5
USS009B2Z 0-1589451-6
USS009B43T 5-1589683-6
USS009B4T 5-1589683-7
USS009L2 0-1589452-3
USS009L2T 0-1589452-4
USS009L2U 0-1589452-5
USS009L2V 0-1589452-6
USS015B2 0-1589451-8
USS015B2T 0-1589451-9
USS015B4T 7-1589683-6
USS015L2 0-1589452-7
USS015L2T 0-1589452-8
USS015L2V 0-1589452-9
USS025B2 1-1589451-0
USS025B4T 8-1589683-6
USS025L2 1-1589452-0
USS025L4T 8-1589683-7
USS037B2 1-1589451-1
USS037B2T 1-1589451-4
USS037L2 1-1589452-1
USS037L2T 1-1589452-2
USS051B2 1-1589451-3
USS051L2 1-1589452-3
Thru-Hole
USS004C6 0-1589453-1
USS004C6T 0-1589453-6
USS004M6 0-1589454-1
USS009C6 0-1589453-2
USS009C6T 0-1589453-3
USS009C6V 0-1589453-4
USS009M6 0-1589454-2
USS015C6 0-1589453-5
Nanonics Tyco
Part Number Part Number
Strip Connectors
Engineering Notes
214 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Catalog 1308638 Dimensions arein inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
215
1589488 160
1589490 151
1589685 192
1589686 188
1589687 192
1589688 188
1589690 185
1589691 182
1589692 182
1589693 183
1589694 189
1589695 193
1589735 145
1589736 145
1589737 147
1589738 147
1589803 146
1589804 148
1589851 167
1589449 208
010-0003-000 94
010-0003-0000 96
010-0004-000 94
010-0004-0000 96
010-0005-000 94
010-0005-0000 96
010-0007-0000 100, 104,105
010-0007-0009 101
010-0008-0000 104
010-0016-0000 95, 101,104
010-0017-0000 95, 101,104
010-0031-0000 106
010-0035-000 94
010-0036-0000 100,101,104
010-0044-000 94
010-0065-0000 116
010-0072-0000 81
010-0075-0000 81
010-0081-0000 116, 126
010-0082-0000 116
010-0083-0000 116
010-0087-0000 81
010-0132-0000 81, 123
010-0150-0000 123
010-0161-0000 123
010-0169-0000 81
010-0172-0000 106
010-0186-0000 106
010-0190-0000 81
010-1004-0000 126
010-1008-0000 100, 101
010-1009-0000 105
010-3002-0000 81
010-3007-0000 81
Part No. Page
1579469 157
1589050 168
1589051 164
1589052 164
1589053 165
1589054 165
1589055 180
1589056 184
1589057 180
1589058 184
1589059 181
1589060 190
1589061 190
1589062 191
1589063 186
1589064 186
1589065 187
1589066 162
1589067 163
1589068 203
1589069 203
1589070 199
1589071 199
1589072 201
1589448 208
1589451 210
1589452 210
1589453 211
1589454 211
1589455 142
1589457 142
1589460 150
1589461 159
1589462 150
1589463 142
1589464 153
1589465 152
1589466 153
1589467 154
1589470 159
1589471 157
1589472 143
1589476 143
1589481 158
1589482 160
1589483 150
1589484 155
1589485 155
1589486 156
1589487 158
Part No. Page
010-3008-0000 81
010-3009-0000 81
010-3010-0000 81
031-0001-0001 93
031-0001-0001 97
031-0001-0003 93, 97
031-0002-0001 93, 97
031-0003-0001 93, 97
031-0004-0001 103, 105
031-0005-0001 103, 105
031-0006-0001 93, 98, 103, 105
031-0017-0001 93, 97
031-0018-0001 93, 97
031-0019-0001 93, 98
031-0020-0001 103, 105
031-0021-0001 103, 105
031-0024-0001 93, 97
031-0032-0001 93, 96, 130
031-0033-0001 93, 96, 130
031-0034-0001 93, 96
031-0036-0001 93, 96, 130
031-0037-0001 93, 96, 130
031-0038-0001 103, 105, 132
031-0040-0001 103, 105, 132
031-0046-0001 93, 98
031-0048-0001 93, 96, 130
031-0049-0001 99, 102
031-0050-0001 93, 97
031-0051-0001 93, 97
031-0052-0001 93, 98
031-0053-0001 99, 101, 131
031-0054-0001 99, 101, 131
031-0057-0001 103,105
031-0058-0001 103,105
031-0059-0001 93, 97
031-0060-0001 99,102
031-0061-0001 93, 97
031-0062-0001 93, 97
031-0063-0001 99, 101,131
031-0064-0001 99, 101,131
031-0065-0001 99,102
031-0067-0001 93, 98
031-0069-0001 93, 97
031-0070-0001 99,102
031-0072-0001 93, 97
031-0073-0001 93, 98
031-0080-0001 93, 98
031-0085-0001 103, 105
031-0087-0001 100
031-0088-0001 93, 96, 130
031-0089-0001 93, 96, 130
031-0090-0001 93, 96, 130
031-0093-0001 99, 101, 131
031-0094-0001 99, 101, 131
Part No. Page 031-0095-0001 99, 101, 131
031-0098-0001 106
031-0125-0001 97
031-0318-0001 97
031-0450-0001 97
031-0459-0001 97
031-0467-0001 96
032-0002-0001 103, 104, 132
032-0010-0001 93, 94, 129
032-0011-0001 93, 94, 129
032-0012-0001 103, 104, 132
032-0013-0001 93, 95, 130
032-0014-0001 93, 95, 130
032-0015-0001 93, 95, 130
032-0016-0001 103, 104, 132
032-0017-0001 93, 94, 129
032-0020-0001 103, 132
032-0021-0001 93, 94, 129
032-0022-0001 93, 94, 129
032-0023-0001 93, 94, 129
032-0025-0001 93, 94, 129
032-0026-0001 103, 104, 132
032-0027-0001 103, 104, 132
032-0030-0001 103, 104, 132
032-0031-0001 103, 104, 132
032-0032-0001 103, 104, 132
032-0033-0001 93, 94, 129
032-0034-0001 130
032-0042-0001 99, 100
032-0055-0001 99, 100, 131
032-0056-0001 99, 100, 131
032-0058-0001 99, 100, 131
032-0059-0001 99, 101, 131
032-0060-0001 99, 100, 131
032-0061-0001 99, 100, 131
032-0062-0001 99, 101, 131
032-0063-0001 99, 101, 131
032-0066-0001 93, 94, 129
032-0067-0001 93, 94, 129
032-0068-0001 93, 95, 130
032-0071-0001 93, 94, 129
032-0072-0001 103, 104, 105, 132
032-0077-0001 99, 100, 131
032-0078-0001 93, 94, 129
032-0079-0001 103, 104, 132
032-0083-0001 99, 101, 131
032-0084-0001 99, 100, 131
032-0087-0001 99, 131
032-0088-0001 106, 132
032-0092-0001 93, 94, 129
032-0093-0001 106, 132
032-0097-0001 93, 94, 129
032-0098-0001 93, 94, 129
032-0099-0001 93, 94, 129
Part No. Page
Note: This index lists all cataloged parts
bybase no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
MICRONOT and NANONICS Connectors
Part Number Index
033-0153-0001 111
051-0049-0001 135
051-0056-0001 135
051-0125-0001 93
051-0134-0001 136
051-0154-0001 136
051-0158-0001 136
051-0232-0001 135
051-0248-0001 106
051-0249-0001 136
051-0258-0001 99
051-0258-0001 102
051-0315-0001 135
051-0318-0001 93
051-0325-0001 99, 102
051-0358-0001 106, 132
051-0389-0001 106, 132
051-0450-0001 93
051-0459-0001 93
051-0467-0001 93, 130
051-0586-0001 103, 105
051-0618-0001 107
052-0061-0001 99, 100
052-0092-0001 93, 94, 129
052-0130-0001 107, 133
052-0138-0001 107, 133
052-0200-0001 93, 94, 129
052-0204-0001 93, 95, 130
052-0207-0001 93, 95, 130
052-0213-0001 93, 94, 129
052-0215-0001 93, 95, 130
052-0228-0001 103, 104, 105, 132
052-0229-0001 106, 132
052-0235-0001 93, 94, 129
052-0235-0003 93, 94, 129
052-0298-0001 93, 95, 130
052-0299-0001 93, 95, 130
052-0304-0022 93, 95, 130
052-0324-0001 106, 132
052-0337-0001 93, 95, 130
052-0370-0001 93, 94, 129
052-0379-0001 93, 95, 130
052-0471-0001 99, 100
052-0542-0001 93, 94, 129
052-0593-0001 107, 133
053-0020-0003 107
053-0021-0003 107
053-0022-0003 107
053-0028-0001 135
053-0108-0001 110
053-0154-0001 107
053-0155-0001 107
053-0161-0001 107
053-0227-0001 135
Part No. Page
032-0153-0001 93, 95, 130
032-0155-0001 93, 94, 129
032-0156-0001 93, 94, 129
032-0222-0001 93, 94, 129
033-0001-0001 110
033-0023-0001 110
033-0036-0001 110
033-0042 108
033-0043 108
033-0044 108
033-0046-0001 109
033-0047-0001 109
033-0048-0001 109
033-0053-0001 110
033-0054-0001 110
033-0055-0001 110
033-0056-0001 109
033-0057-0001 109
033-0058-0001 109
033-0067-0001 109
033-0068-0001 109
033-0069-0001 109
033-0081-0001 111
033-0082-0001 111
033-0084-0001 109
033-0090-0001 111
033-0092-0001 111
033-0093-0001 111
033-0094-0001 111
033-0097-0001 111
033-0098-0001 111
033-0101-0001 110
033-0102-0001 110
033-0103-0001 110
033-0104-0001 110
033-0105-0001 110
033-0106-0001 110
033-0107-0001 110
033-0109-0001 110
033-0110-0001 110
033-0111-0001 110
033-0112-0001 110
033-0115-0002 107
033-0116-0001 107
033-0117-0001 107
033-0124-0001 111
033-0125-0001 111
033-0126-0001 111
033-0127-0001 110
033-0129-0001 110
033-0141-0001 111
033-0143-0001 111
033-0145-0001 111
033-0147-0001 109
Part No. Page 053-0228-0001 135
053-0230-0001 107
053-0249-0001 107
053-0250-0001 107
053-0251-0001 107
053-0265-0001 107
053-0267-0003 107
053-0294-0002 107
053-0339-0001 111
053-0354-0003 107
053-0388-0001 107
053-0412-0001 135
053-0455-0001 136
053-0495-0001 107
053-0636-0001 136
053-0656-0001 107
082-0009-0000 73
082-0010-0000 73
082-0113-00T1 63, 73
082-0132-00T1 63
082-0462-00Y9 73
082-0464-00Y9 63, 73
082-0466-00Y9 79
083-0009-00R4 63, 73
083-0158-00R4 63, 73
083-0173-00R4 63, 78
083-1200-00R4 73
084-0024-00T2 63
084-0025-00T2 63
084-0026-00T2 63, 79
084-0027-00T2 63
084-0028-00T2 63
084-0029-00T2 63
086-0001-0000 63, 80
086-0009-0000 80
086-0010-0000 80
086-0014-0000 63, 80
086-0015-0000 63, 80
086-0049-00AL 72
086-0049-00J2 63
086-0050-00AL 72
086-0050-00J2 63
086-0051-00AL 72
086-0051-00J2 63
086-0052-00J2 63
086-0052-00L6 72
086-0053-00J2 63
086-0053-00L6 72
086-0054-00J2 63
086-0054-00L6 72
086-0055-0000 63, 73
086-0056-0000 63, 73
086-0056-0000 80
086-0057-0000 63, 80
Part No. Page 086-0058-0000 63, 80
086-0059-0000 63, 80
086-0060-0000 63, 80
086-0061-0000 63, 80
086-0062-0000 63, 80
086-0063-0000 63, 80
086-0073-00P1 63
086-0073-00W3 72
086-0074-00P1 63
086-0074-00W3 72
086-0075-00P1 63
086-0075-00W3 72
086-0076-00P1 63
086-0076-00P2 72
086-0077-00P1 63
086-0077-00P2 72
086-0078-00P1 63
086-0078-00P2 72
086-0099-00F5 73
086-0099-00X1 63
086-0100-00F5 73
086-0100-00X1 63
086-0101-00F5 73
086-0101-00X1 63
086-0103-00F5 73
086-0103-00X1 63
086-0104-00F5 73
086-0104-00X1 63
086-0105-00F5 73
086-0105-00X1 63
086-0139-00W3 72
086-0140-00P2 72
086-0142-00F5 73
086-0143-00F5 73
086-0146-00AL 72
086-0147-00L6 72
086-0148-0000 73, 80
086-0175-00F3 73
086-0175-00N1 77
086-0176-00F3 73
086-0176-00N1 77
086-0177-00F3 73
086-0177-00N1 77
086-0178-00F3 73
086-0178-00N1 77
086-0179-00F3 73
086-0179-00N1 77
086-0180-00F3 73
086-0180-00N1 77
086-0181-00F3 73
086-0181-00N1 77
086-0182-00F3 73
086-0182-00N1 77
086-0251-0000 80
Part No. Page
MICRONOT and NANONICS Connectors
Part Number Index (Continued)
216 Catalog 1308638 Dimensions arein inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Catalog 1308638 Dimensions arein inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
217
131-0202-0002 116
131-0300-0001 115, 134
131-0301-0001 115, 134
131-0303-0002 116
131-0304-0001 116
131-0705-0001 116
131-0904-0001 116
132-0112-000 133
132-0112-0001 113
132-0112-0002 113
132-0112-0003 113
132-0112-0004 113
132-0113-000 133
132-0113-0001 113
132-0113-0002 113
132-0113-0003 113
132-0113-0004 113
132-0114-000 133
132-0114-0001 113
132-0114-0002 113
132-0114-0003 113
132-0114-0004 113
132-0115-000 133
132-0115-0001 113
132-0115-0002 113
132-0115-0003 113
132-0115-0004 113
132-0116-0002 114, 133
132-0117-0002 114, 133
132-0118-0002 114, 133
132-0119-0002 114, 133
132-0200-000 133
132-0200-0001 113
132-0200-0002 113
132-0200-0003 113
132-0200-0004 113
132-0201-000 133
132-0201-0001 113
132-0201-0002 113
132-0201-0003 113
132-0201-0004 113
132-0202-0002 114, 133
132-0203-0002 114, 133
132-0300-000 133
132-0300-0001 114
132-0300-0002 114
132-0300-0003 114
132-0300-0004 114
132-0301-000 133
132-0301-0001 114
132-0301-0002 114
132-0301-0003 114
132-0301-0004 114
132-0302-0002 114, 133
Part No. Page
086-0253-00P2 77
086-0254-00P2 77
086-0255-00P2 77
086-0256-00P2 77
086-0257-00L6 77
086-0258-00L6 77
086-0259-00L6 77
086-0260-00L6 77
086-0261-00F5 77
086-0262-00F5 77
086-0263-00F5 77
086-0264-00F5 77
086-0265-00L6 77
086-0266-00L6 77
086-0267-00L6 77
086-0268-00L6 77
086-0330-0000 86
086-0331-0000 86
086-0337-00N1 85
086-0338-00N1 85
086-0339-00N1 85
086-0340-00N1 85
086-0341-00N1 85
086-0342-00N1 85
086-0343-00N1 85
086-0344-00N1 85
096-0001-0000 15
096-0002-0008 15
096-0002-0009 14
096-0002-0010 14
096-0002-0011 14
096-0002-0013 15
096-0002-0014 14
096-0002-0015 14
096-0002-0060 14
096-0002-0061 14
096-0002-0062 14
096-0002-0064 14
096-0002-0065 14
096-0526-0000 86
096-0626-0001 86
131-0134-0001 115, 134
131-0135-0001 115, 134
131-0136-0001 115, 134
131-0137-0001 115, 134
131-0138-0002 116
131-0139-0002 116
131-0140-0001 116
131-0141-0002 116
131-0142-0002 116
131-0150-0001 115
131-0151-0001 115
131-0200-0001 115, 134
131-0201-0001 115, 134
Part No. Page 132-0303-0002 114, 133
132-0509-0002 113, 133
141-0000-0001 118
141-0001-0001 118
141-0002-0001 118
141-0002-0002 118
141-0003-0001 118
141-0003-0002 118
141-0004-0001 119
141-0010-0001 119
141-0011-0001 121
141-0011-0002 121
141-0012-0001 121
141-0012-0002 121
141-0013-0001 119
141-0014-0001 121
141-0015-0001 121
141-0017-0001 121
141-0019-0001 119
141-0020-0001 121
141-0023-0001 121, 123
141-1000-0001 122
141-1001-0001 122
141-1001-0001 123
141-1002-0001 122
141-1002-0002 122
141-1003-0001 123
141-1003-0002 123
141-1004-0001 123
141-1005-0001 123
141-1012-0001 123
141-1500-0001 63, 79
142-0000-0001 118
142-0000-0002 118
142-0000-0003 118
142-0002-0001 118
142-0002-0002 118
142-0002-0003 118
142-0005-0001 120
142-0005-0002 120
142-0005-0003 120
142-0010-0001 120
142-0010-0002 120
142-0010-0003 120
142-1000-0001 122
142-1002-0001 122
142-1021-0001 122
142-1500-0001 63, 79
143-0001-0001 124
143-0002-0001 124
143-0003-0001 124
143-0004-0001 125
143-0005-0001 119
143-0029-0001 124
Part No. Page 143-0030-0001 125
143-0031-0000 125
143-0032-0001 124
143-1000-0001 124
143-1001-0001 125
143-1002-0001 125
143-1003-0001 125
144-0001-0001 126
145-0002-0001 126
145-0003-0001 126
1466018-1 15
1495164-1 15
3-1532030-3 78
3-1532030-4 78
4-1532036-8 78
4-1532137-3 15
5-1532030-6 78
5-1532030-7 79
5-1532129-7 79
5-1532129-8 79
5-1532129-9 79
5-1532137-5 14
5-1532137-6 14
5-1532137-7 14
5-1532137-8 14
5-1532137-9 14
5-1532155-0 79
5-1532168-1 79
6-1532030-1 78
6-1532137-0 14
6-1532137-1 14
6-1532137-2 14
6-1532137-3 14
6-1532137-4 14
7-1532037-3 78
8-1532030-1 78
A43 59
B43 59
C43 59
Circular Connectors 194
Coax Only Wire Terminations 200
Coax SMT Termination 202
Coax w/Mixed Signal 204
DUALOBE Jumper
Terminations 149
DUALOBE Panel Mount
Connectors 169
DUALOBE SMT & Thru-Hole
Terminations 161
DUALOBE Solder Cup
Termination 166
DUALOBE Wire Terminations 144
Flex Termination Duckbill
Connectors 163
HDSM 54
Part No. Page
MICRONOT and NANONICS Connectors
Part Number Index (Continued)
MCD 7
MCD**- 11, 12
MCDM 25
MCDM1 26
MCDM3 28
MCDR3 32, 33, 34
MCE 41
MCEM 42
MCEM1 44
MCJ 46, 47
MCJM 48, 49
MCK 7, 16, 19
MCK-** 9, 17, 20, 23, 31, 32, 34, 35
MCS 50
MD53 67, 68
MD53-00E 70
MD53-01E 70
MD53-02E 71
MD53-06E 69
MD53-12E 71
MD53-16E 69
MD63-* 75
MD63-00E 76
MD63-01E 76
MD63-02E 76
MD73-* 83
MD73-00E 84
MD73-01E 85
MD73-02E 84
MD73-06E 84
MQR-* 87
MTC-* 89
S96-0002-0009 14
S96-0002-0060 14
S96-0002-0084 14
S96-0002-0085 14
S96-0002-0086 14
S96-0002-0087 14
S96-0002-0088 14
S96-0002-0089 14
S96-0002-0090 14
S96-0002-0091 14
Strip Connectors 209
Strip Connectors, SMT &
ThruHole 212
T53-* 72
Part No. Page
MICRONOT and NANONICS Connectors
Part Number Index (Continued)
218 Catalog 1308638 Dimensions arein inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
MICRONOT and NANONICS Connectors
Engineering Notes
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
219
MICRONOT and NANONICS Connectors
Engineering Notes
220 Catalog 1308638 Dimensions arein inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Global Contacts
1308638–10M–GIC–CGX–8-05 Tyco Electronics Corporation
www.tycoelectronics.com
Americas
Asia/Pacific
Argentina –Buenos Aires
Phone: +54-11-4733-2200
Fax: +54-11-4733-2211
Brasil –São Paulo
Phone: +55-11-3611-1311
Fax: +55-11-3611-0397
Canada –Markham
Phone: +905-475-6222
Fax: +905-474-5520
Product Information Center:
(Technical Support)
Phone: +905-470-4425
Fax: +905-474-5525
Colombia –Bogota
Phone: +57-1-231-9398
Fax: +57-1-660-0206
Mexico –Mexico City
Phone: +52-5-729-0400
Fax: +52-5-361-8545
United States –Harrisburg, PA
Phone: +717-564-0100
Fax: +717-986-7575
Product Information Center:
(Technical Support)
Phone: +800-522-6752
Fax: +717-986-7575
Australia –Sydney
Phone: +61-2-9554-2600
Fax: +61-2-9502-2556
Product Information Center:
(Technical Support)
Phone: +61-2-9840-8200
Fax: +61-2-9634-6188
India –Bangalore
Phone: +91-80-285-40800
Fax: +91-80-285-40820
Indonesia –Jakarta
Phone: +65-6482-0311
Fax: +65-6482-1012
Japan –Toyko
Phone: +81-44-844-8111
Fax: +81-44-812-3207
Product Information Center:
(Technical Support)
Phone: +81-44-844-8013
Fax: +81-44-812-3200
Raychem Products
Phone: +81-44-900-5102
Fax: +81-44-5025-5027
Korea –Seoul
Phone: +82-2-3415-4500
Fax: +82-2-3486-3810
Malaysia –Kuala Lumpur
Phone: +60-3-78053055
Fax: +60-3-78053066
New Zealand –Auckland
Phone: +64-9-634-4580
Fax: +64-9-634-4586
Philippines –Makati City
Phone: +632-848-0171
Fax: +632-867-8661
People’s Republic of China
Hong Kong
Phone: +852-2735-1628
Fax: +852-2735-0243
Shanghai
Phone: +86-21-53838188/64850602
Fax: +86-21-53838018/54260180
Shunde
Phone: +86-765-775-1368
Fax: +86-765-775-2823
For Latin/South American
Countries not shown
Phone: +54-11-4733-2015
Fax: +54-11-4733-2083
Europe/Middle East/Africa
Austria –Vienna
Phone: +43-190-560-0
Fax: +43-190-560-1333
Belgium –Kessel-Lo
Phone: +32-16-35-23-00
Fax: +32-16-35-23-52
Bulgaria –Sofia
Phone: +359-2-971-2152
Fax: +359-2-971-2153
Czech Republic –Kurim
Phone: +420-5-41-162-111
Fax: +420-5-41-162-223
Denmark – Viby J
Phone: +45-70-15-52-00
Fax: +45-43-44-14-14
Egypt –Cairo
Phone: +20-2-417-76-47
Fax: +20-2-419-23-34
Estonia –Tallinn
Phone: +372-65-05-474
Fax: +372-65-05-470
Finland –Helsinki
Phone: +358-95-12-34-20
Fax: +358-95-12-34-250
France –
Cergy-Pontoise
Phone: +33-1-3420-8888
Fax: +33-1-3420-8600
Product Information Center:
(Technical Support)
Phone: +33-1-3420-8943
Fax: +33-1-3420-8623
France
Tyco Electronics Export –
St Ouen L’Aumone
Phone: +33-1-3440-7200
Fax: +33-1-3440-7220 or
+33-1-3440-7230
Germany –Bensheim
Phone: +49-6251-133-0
Fax: +49-6251-133-1600
Product Information Center:
(Technical Support)
Phone: +49-6251-133-1999
Fax: +49-6251-133-1988
Germany –Langen
Phone: +49-6103-709-0
Fax: +49-6103-709-1223
Germany –Speyer
Phone: +49-6232-30-0
Fax: +49-6232-30-2243
Germany
HTS Division –Neunkirchen
Phone: +49-2247-305-0
Fax: +49-2247-305-122
Great Britain –
Stanmore Middlesex
Phone: +44-208-954-2356
Fax: +44-208-954-6234
Product Information Center:
(Technical Support)
Freephone GB: 0800-267-666
Phone: +44-141 810 8968
Fax: +44-141 810 8971
Great Britain –Dorcan, Swindon
Raychem Products
Phone: +44-1793-528171
Fax: +44-1793-572516
Greece –Athens
Phone: +30-1-9370-396/397
Fax: +30-1-9370-655
Hungary –Budapest
Phone: +36-1-289-1000
Fax: +36-1-289-1010
Ireland –Dublin
Phone: +353-1-820-3000
Fax: +353-1-820-9790
Israel – Yokneam
Phone: +972-4-959-0508
Fax: +972-4-959-0506
Italy –Collegno (Torino)
Phone: +39-011-4012-111
Fax: +39-011-4031-116
Lithuania – Vilnius
Phone: +370-5-2131-402
Fax: +370-5-2131-403
Netherlands –’s-Hertogenbosch
Phone: +31-73-624-6246
Fax: +31-73-621-2365
Product Information Center:
(Technical Support)
Phone: +31-73-6246-999
Fax: +31-73-6246-998
Norway –Nesbru
Phone: +47-66-77-8899
Fax: +47-66-77-8855
Poland – Warsaw
Phone: +48-22-45-76-700
Fax: +48-22-45-76-720
Romania –Bucharest
Phone: +40-1-311-3479/3596
Fax: +40-1-312-0574
Russia –Moscow
Phone: +7-095-926-5506/07/08/09
Fax: +7-095-926-5505
Russia –St. Petersburg
Phone: +7-812-118-8192
Fax: +7-812-118-8193
Slovakia –Banská Bystrica
Phone: +421-48-415-20-11/12
Fax: +421-48-415-20-13
Slovenia –Ljubljana
Phone: +386-1561-3270
Fax: +386-1561-3240
South Africa –Port Elizabeth
Phone: +27-41-405-4500
Fax: +27-41-486-1314
Spain –Barcelona
Phone: +34-93-291-0330
Fax: +34-93-201-7879
Product Information Center:
(Technical Support):
Phone: +34-93-291-0330
Fax: +34-93-200-3779
Sweden –Upplands Väsby
Phone: +46-8-50-72-50-00
Fax: +46-8-50-72-50-01
Switzerland –Steinach
Phone: +41-71-447-0447
Fax: +41-71-447-0444
Turkey –Istanbul
Phone: +90-212-281-8181/2/3
Fax: +90-212-281-8184
Ukraine –Kiev
Phone: +38-044-238-6908
Fax: +38-044-568-5740
MICRODOT and NANONICS Connectors
Tyco Electronics Corporation
Harrisburg, Pennsylvania
www.tycoelectronics.com
1308638 10M GIC CGX 8-05
MICRODOT and
NANONICS Connectors
