AVCSERIES 8 PIN, MINI-DIP, SINGLE OUTPUT, TTL ACTIVES DC Electrical Characteristics ; . Parameter Test Conditions Min Mox Unit VOH |HighLevel Output Voltage | Vcc=min. Vi_=max. |OH=max | 2.7 Vv VoL |Low Level Output Voltage Voc=min. Vin=min. | oL=max 0.5 Vv ViK [Input Clamp Voltage Vec=min. |;=-18mA -1.2 Vv ly HighLevel Input Current Voc=max. Vin =2.7V 50 uA Vec=max. Viy=5.25V 1.0 mA Wie Low-Level Input Current Voc =max. Vin=0.5V ~-2 mA log |Short Circuit Output Current] Voc =max. Voyt=0 -40 |-100) mA ; (One output at a time) ICCH | High-Level Supply Current Voc =max. Viy=OPEN 75 mA ICCL |Low~Level Supply Current Voc =max. Viyy=O 75 mA TRO | Output Rise Time Voc =5.0V(0.75 to 2.4 Volts) 4 ns NH Fanout High-Level Output | Vcc=max. VoH=2.7V 20 TTL LOAD NL Fanout Low~Level Output Vec=max. VoH=0.5V 10 TTYL LOAD Recommended Operating Conditions Min Max Unit Vcc | Supply Voltage 4.75 5.25 Vv Viq_ | High-level Input voltage 2.0 Vv Vit | Low-Level Input Voltage 0.8 v lon | High-Level Output Current ~1.0 mA loL | Low-Level Output Current .20 mA Pw | Pulse Width % of Total Delay 40 % Ta | Operating FreeAir Temperature) 0 +70 c Input Pulse Test Conditions @ 25C Unit Ein | Pulse Input Voltage 3.2 Volts Pw | Pulse Width % of Total Delay 110 % Tri | Pulse Rise Time(O.75 ~ 2.4 Volts) 2.0 ns Pre Pulse Repetition Rate @ Td= 200 nS 1.0 MHz Pulse Repetition Rate @ Td> 200 nS 100 KHz Voc] Supply Voltage 5.0 Volts 8 5 mM mM | 030 014 AVC PINOUT .005 .008 -280 MAX +| al POLARA P/N AVC_ PINOUT be-.500 MAX] -420 MAX OPTIONAL SURFACE MOUNT PACKAGE .250 MAX .010 TYP -310 015 MIN 125 MIN wx "390 te ADD "S" SUFFIX TO P/N, TO ORDER SURFACE MOUNT PACKAGE. * ANY VALUES NOT SHOWN, AVAILABLE UPON REQUEST. 4115 ARTESIA AVENUE FULLERTON, CALIFORNIA 92633 (714) 521-0900 FAX (714) 522-8001