LITE-ON SEMICONDUCTOR MBRF10150CT thru 10200CT REVERSE VOLTAGE - 150 to 200 Volts FORWARD CURRENT - 10 Amperes SCHOTTKY BARRIER RECTIFIERS ITO-220AB FEATURES B M DIM. K D A C Metal of silicon rectifier,majority carrier conducton Guard ring for transient protection Low power loss, high efficiency High current capability, low VF High surge capacity Plastic package has UL flammability classification PIN 94V-0 2 3 E 1 G Case : ITO-220AB molded plastic Polarity : As marked on the body Weight : 0.06 ounces, 1.70 grams Mounting position : Any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) J F MECHANICAL DATA I H N H L PIN 1 PIN 2 PIN 3 ITO-220AB MIN. MAX. A B C 15.50 10.0 3.00 16.50 10.40 3.50 D E 9.00 2.90 9.30 3.60 F 13.46 1.15 2.40 14.22 G H 1.70 2.70 0.75 1.00 0.45 0.70 3.00 3.30 L 4.36 4.77 M 2.48 2.80 2.80 2.50 N All Dimensions in millimeter I J K MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (See Fig.1) 150 105 150 200 140 200 UNIT V V V 10 A IFSM 120 A IRRM 1 A dv/dt 10000 V/us TJ =25 C TJ =125 C TJ =25 C TJ =125 C VF 0.92 0.75 1.00 0.85 V @TJ =25 C @TJ =125 C IR 8 2 uA mA R0JC 5.0 C/W Peak Repetitive Reverse Current tp=2us, square F=1KHz @TJ=25 C Voltage Rate of Change (Rated VR) IF=5A @ IF=5A @ IF=10A @ IF=10A @ Maximum DC Reverse Current at Rated DC Blocking Voltage MBRF10200CT I(AV) TC =135 C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage (Note 1) VRRM VRMS VDC MBRF10150CT Typical Thermal Resistance (Note 2) Typical Junction Capacitance CJ 120 per element (Note 3) Operating Junction and Storage TJ, -65 to +175 TSTG Temperature Range Dielectric Strengh from terminals to case, Vdis 2000 AC with t=1 minute, RH<30% NOTES : 1. 300us Pulse Width, 2% Duty Cycle. 2. Device mounted on 135 mm X 135 mm X 8 mm Alumium Plate Heatsink. 3. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. pF V REV. 3, Oct-2010, KTHC38 RATING AND CHARACTERISTIC CURVES MBRF10150CT thru 10200CT FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT , AMPERES 10.0 8.0 6.0 4.0 2.0 RESISTIVE OR INDUCTIVE LOAD 0.0 25 150 125 100 75 50 25 Single Half-Sine-Wave 0 50 75 100 125 150 1 175 2 5 INSTANTANEOUS FORWARD CURRENT , AMPERES 100 TJ =75 TJ =25 1 20 40 60 80 100 120 100 100 10 1.0 TJ =25 Pule Width 300us 2% Duty Cycle 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 INSTANTANEOUS FORWARD VOLTAGE , VOLTS REVERSE VOLTAGE , VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 100 10 f=1MHz TJ =25 1 0.1 50 FIG.4 - TYPICAL FORWARD CHARACTERISTICS TJ =125 CAPACITANCE , (PF) INSTANTANEOUS REVERSE CURRENT , (uA) FIG.3 - TYPICAL REVERSE CHARACTERISTICS 1000 0 20 NUMBER OF CYCLES AT 60Hz CASE TEMPERATURE , 10 10 1 10 REVERSE VOLTAGE , VOLTS 100 1.0 Legal Disclaimer Notice MBRF10150CT thru 10200CT Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.