GQ (AGQ) High capacity 2 Amp, Flat and Compact package RoHS compliant FEATURES 1. High capacity: 2 A 2. Compact flat body saves space With a small footprint of 10.6 mm (L) x 7.2 mm (W) .417 inch (L) x .283 inch (W) for space savings, it also has a very short height of 5.2 mm .205 inch. (Standard PC board type.) 3. High sensitivity single side stable type (Nominal operating power: 100mW) is available 4. Outstanding surge resistance. Surge breakdown voltage between contacts and coil: 2,500 V 2x10 s (Telcordia) Surge breakdown voltage between open contacts: 1,500 V 10x160 s (FCC part 68) 5. The use of twin crossbar contacts ensures high contact reliability. AgPd contact is used because of its good sulfide resistance. Adopting lowgas molding material. Coil assembly molding technology which avoids generating volatile gas from coil. 6. Increased packaging density Due to highly efficient magnetic circuit design, leakage flux is reduced and changes in electrical characteristics from components being mounted close-together are minimized. This all means a packaging density higher than ever before. 7. Nominal operating power: 140 mW GQ RELAYS (AGQ) 8. Outstanding vibration and shock resistance. Functional shock resistance: 750 m/s2 Destructive shock resistance: 1,000 m/s2 Functional vibration resistance: 10 to 55 Hz (at double amplitude of 3.3 mm .130 inch) Destructive vibration resistance: 10 to 55 Hz (at double amplitude of 5 mm .197 inch) 9. Sealed construction allows automatic washing. TYPICAL APPLICATIONS 1. Telephone switchboard 2. Telecommunications equipment 3. Security 4. Measurement equipment 5. Consumer electronic and audio visual equipment ORDERING INFORMATION AGQ 2 0 Contact arrangement 2: 2 Form C Operating function 0: Single side stable 1: 1 coil latching 6: High sensitivity single side stable type Type of operation 0: Standard type (B.B.M.) Terminal shape Nil: Standard PC board terminal A: Surface-mount terminal A type S: Surface-mount terminal S type Nominal coil voltage (DC) 1H: 1.5V 03: 3V 4H: 4.5V 06: 6V 09: 9V 12: 12V 24: 24V Packing style Nil: Tube packing X: Tape and reel packing (picked from 1/2/3/4 pin side) Z: Tape and reel packing (picked from 5/6/7/8 pin side) ASCTB7E 201209-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ GQ (AGQ) TYPES 1. Standard PC board terminal Nominal coil voltage 1.5V DC 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. AGQ2001H AGQ20003 AGQ2004H AGQ20006 AGQ20009 AGQ20012 AGQ20024 1 coil latching Part No. AGQ2101H AGQ21003 AGQ2104H AGQ21006 AGQ21009 AGQ21012 AGQ21024 High sensitivity single side stable Part No. AGQ2601H AGQ26003 AGQ2604H AGQ26006 AGQ26009 AGQ26012 AGQ26024 Single side stable Part No. AGQ2001H AGQ20003 AGQ2004H AGQ20006 AGQ20009 AGQ20012 AGQ20024 1 coil latching Part No. AGQ2101H AGQ21003 AGQ2104H AGQ21006 AGQ21009 AGQ21012 AGQ21024 High sensitivity single side stable Part No. AGQ2601H AGQ26003 AGQ2604H AGQ26006 AGQ26009 AGQ26012 AGQ26024 1 coil latching Part No. AGQ2101HZ AGQ21003Z AGQ2104HZ AGQ21006Z AGQ21009Z AGQ21012Z AGQ21024Z High sensitivity single side stable Part No. AGQ2601HZ AGQ26003Z AGQ2604HZ AGQ26006Z AGQ26009Z AGQ26012Z AGQ26024Z Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2. Surface-mount terminal 1) Tube packing Nominal coil voltage 1.5V DC 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC : For each surface-mounted terminal identification, input the following letter. A type: A, S type: S Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2) Tape and reel packing Nominal coil voltage 1.5V DC 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. AGQ2001HZ AGQ20003Z AGQ2004HZ AGQ20006Z AGQ20009Z AGQ20012Z AGQ20024Z : For each surface-mounted terminal identification, input the following letter. A type: A, S type: S Standard packing: Tape and reel: 900 pcs.; Case: 1,800 pcs. Notes: 1. Tape and reel packing symbol "-Z" is not marked on the relay. "X" type tape and reel packing (picked from 1/2/3/4-pin side) is also available. 2. Please inquire if you require a relay, between 1.5 and 24 V DC, with a voltage not listed. RATING 1. Coil data 1) Single side stable type Nominal coil voltage Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 20C 68F) 140mW 150%V of nominal voltage 1.5V DC 93.8mA 16 3V DC 4.5V DC 6V DC 9V DC 12V DC 46.7mA 31mA 23.3mA 15.5mA 11.7mA 64.2 145 257 579 1,028 9.6mA 2,504 230mW 120%V of nominal voltage Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 20C 68F) 1.5V DC 66.7mA 22.5 3V DC 4.5V DC 6V DC 9V DC 12V DC 24V DC 33.3mA 22.2mA 16.7mA 11.1mA 8.3mA 5.0mA 90 202.5 360 810 1,440 4,800 100mW 150%V of nominal voltage 75%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) 24V DC 2) 1 coil latching type Nominal coil voltage Set voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) Reset voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) 120mW *Pulse drive (JIS C 5442-1996) Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB7E 201209-T GQ (AGQ) 3) High sensitivity single side stable type Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) 1.5V DC 66.7mA 22.5 3V DC 4.5V DC 6V DC 33.3mA 22.2mA 16.7mA 90 202.5 360 11.1mA 8.3mA 810 1,440 5.0mA 4,800 Nominal coil voltage 9V DC 12V DC Set voltage (at 20C 68F) Reset voltage (at 20C 68F) 80%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) 24V DC Nominal operating power Max. applied voltage (at 20C 68F) 100mW 150%V of nominal voltage 120mW 120%V of nominal voltage *Pulse drive (JIS C 5442-1996) 2. Specifications Characteristics Contact Rating Item Arrangement Initial contact resistance, max. Contact material Nominal switching capacity Max. switching power Max. switching voltage Max. switching current Min. switching capacity (Reference value)*1 Single side stable Nominal operating High sensitivity single side power stable type 1 coil latching Specifications 2 Form C Max. 100 m (By voltage drop 6 V DC 1A) Stationary contact: AgPd+Au clad Movable contact: AgPd 2 A 30 V DC, 1 A 30 V DC, 0.3 A 125 V AC (resistive load) 60 W (DC), 30 W (DC), 37.5 V A (AC) (resistive load) 110 V DC, 125 V AC 2A 10A 10 mV DC 140mW (1.5 to 12 V DC), 230mW (24 V DC) 100mW (1.5 to 12 V DC), 120mW (24 V DC) Min. 1,000M (at 500V DC) Measurement at same location as "Initial breakdown voltage" section. 750 Vrms for 1min. (Detection current: 10mA) 1,500 Vrms for 1min. (Detection current: 10mA) 1,000 Vrms for 1min. (Detection current: 10mA) 1,500 V (10x160s) (FCC Part 68) 2,500 V (2x10s) (Telcordia) Max. 50C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10s.) Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.) 10 to 55 Hz at double amplitude of 5 mm Min. 5 x 107 (at 180 cpm) Min. 5 x 104 (2 A 30 V DC resistive), Min. 105 (1 A 30 V DC resistive), Min. 105 (0.3 A 125 V AC resistive) (at 20 cpm) Ambient temperature: (Single side stable, 1 coil latching type) -40C to +85C -40F to +185F (High sensitivity single side stable type) -40C to +70C -40F to +158F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 cpm Approx. 1 g .035 oz Insulation resistance (Initial) Breakdown voltage (Initial) Electrical characteristics Surge breakdown voltage (Initial) Between open contacts Between contact and coil Between contact sets Between open contacts Between contacts and coil Temperature rise (at 20C 68F) Operate time [Set time] (at 20C 68F) Release time [Reset time] (at 20C 68F) Mechanical characteristics Expected life Conditions Functional Destructive Functional Vibration resistance Destructive Mechanical Shock resistance Electrical Conditions for operation, transport and storage*2 Max. operating speed (at rated load) Unit weight Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24). REFERENCE DATA 1. Max. switching capacity 2. Life curve 3. Mechanical life * Max. switching capacity is 2A 30V DC. Tested sample: AGQ200A4H, 6 pcs. Operating speed: 180 cpm 0.3 4 50 40 30 DC 30V resistive load 20 ASCTB7E 201209-T 100 Contact voltage, V Panasonic Corporation 0 Pick-up voltage 3 Max. Min. 2 AC 125V resistive load 10 30 Voltage, V DC resistive load AC resistive load 1.0 No. of operations, x 104 Switching current, A 100 0.2 0.4 0.6 0.8 1 1.0 1.2 Switching current, A Automation Controls Business Unit 0 0 Drop-out voltage 10 30 No. of operations, x104 industrial.panasonic.com/ac/e/ Max. Min. 50 GQ (AGQ) 4. Electrical life (1A 30V DC resistive load) 5. Coil temperature rise Tested sample: AGQ200A4H, 6 pcs. Operating speed: 20 cpm Tested sample: AGQ200A4H, AGQ200A24, 6 pcs. Point measured: Inside the coil Ambient temperature: Room temperature Change of contact resistance 100 90 90 80 Pick-up voltage 70 Max. Min. 60 50 40 Drop-out voltage 30 80 70 60 50 X X 40 30 Max. Min. 20 70 N.C. contact N.O. contact Temperature rise, C 100 Contact resistance, m Ratio against the rated voltage, %V Change of pick-up and drop-out voltage 5 40 1A 0A 30 20 10 10 0 0 10 No. of operations, x10 1A 0A 50 20 10 0 0 4.5V DC type 24V DC type 60 5 0 10 100 110 No. of operations, x104 4 120 130 140 150 Coil applied voltage, % 6-(2). Operate and release time (with diode) 7. Ambient temperature characteristics Tested sample: AGQ2004H, 10 pcs. Tested sample: AGQ2004H, 10 pcs. Tested sample: AGQ200A4H, 6 pcs. 3 Operate time Release time Operate and release time, ms Operate and release time, ms 3 Max. 2 1 Min. Max. Min. Operate time Release time Max. 2 Drop-out voltage -40 -20 0 Min. Max. Min. Rate of change, %V 6-(1). Operate and release time (without diode) Pick-up voltage 1 50 40 30 20 x x 10 60 80 100 20 40 -10 Ambient temperature, C -20 -30 -40 0 70 80 90 100 110 120 0 130 70 80 90 100 110 120 -50 130 Coil applied voltage, %V Coil applied voltage, %V 9-(1). Influence of adjacent mounting 9-(2). Influence of adjacent mounting Tested sample: AGQ200A4H, 6 pcs. Tested sample: AGQ20012, 6 pcs. Tested sample: AGQ20012, 6 pcs. Deenergized condition Energized condition X 1,000m/s2 Z 1,000m/s2 1,000m/s2 Z' 1,000m/s2 X' 1,000m/s2 Y' 10 5 ON Pick-up voltage 0 -5 ON -10 10 OFF OFF 5 Drop-out voltage 0 OFF -5 -10 0 DIMENSIONS (mm inch) ON Rate of change, %V 1,000m/s Y 2 Rate of change, %V X' Rate of change, %V Z X Z' Y Y' Rate of change, %V 8. Malfunctional shock CAD Data 5 ON Pick-up voltage 0 ON -5 ON -10 10 OFF 5 Drop-out voltage 0 OFF -5 -10 0 2 4 6 8 10 12 .079 .157 .236 .315 .394 .472 Inter-relay distance , mm inch The CAD data of the products with a 10 OFF 2 4 6 8 10 12 .079 .157 .236 .315 .394 .472 Inter-relay distance , mm inch mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1. PC board terminal External dimensions CAD Data 10.600.3 .417.012 5.200.2 .205.008 PC board pattern 2.20 .087 7.200.3 .283.012 3.20 .126 0.400.1 .016.004 3.200.15 .126.006 Panasonic Corporation 2.200.15 .087.006 3.500.3 2.200.15 .138.012 .087.006 0.200.1 .008.004 5.080.15 .200.006 Automation Controls Business Unit 2.20 .087 5.08 .200 Schematic (Bottom view) Single side stable High sensitivity single side stable 1 2 3 4 8 7 6 5 1 coil latching 1 2 3 4 8 7 6 5 0.85 dia. .033 dia. Tolerance: 0.1 .004 Direction indication Direction indication (Deenergized condition) (Reset condition) industrial.panasonic.com/ac/e/ ASCTB7E 201209-T GQ (AGQ) 2. Surface-mount terminal CAD Data Suggested mounting pad (Tolerance: 0.1 .004) Single side stable/1 coil latching/High sensitivity single side stable External dimensions Single side stable/1 coil latching/High sensitivity single side stable Type Max. 5.40 .213 7.200.3 .283.012 10.600.3 .417.012 A type 2.200.15 .087.006 2.200.15 .087.006 0.400.1 .016.004 3.200.15 .126.006 Max. 5.40 .213 0.200.1 .008.004 2.20 .087 2.20 .087 3.20 .126 2.66 6.74 .105 .265 5.080.15 .200.006 8.400.3 .331.012 0.80 .031 7.200.3 .283.012 10.600.3 .417.012 2.20 .087 2.20 .087 3.20 .126 S type 0.200.1 .008.004 5.080.15 .200.006 2.200.15 .087.006 0.400.1 .016.004 3.200.15 .126.006 2.200.15 .087.006 2.06 .081 6.14 .242 0.80 .031 7.200.3 .283.012 Schematic (Top view) Single side stable High sensitivity single side stable 8 7 6 5 1 2 3 4 1 coil latcing 8 7 6 5 1 2 3 4 Direction indication Direction indication (Deenergized condition) (Reset condition) NOTES 1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below. (S type) (1)-2 Tape dimensions Relay polarity bar (Z type) 1.50 +0.1 0 dia. .059 +.003 .0 dia. 2.0 .079 Orientation (indicates PIN No.1) stripe 4.0 2.00 dia. .157 .079 dia. 1.75 .069 11.5 .453 Max. 6.55 .256 0.40 .016 24.00.3 .945.012 11.1 .437 12.0 .472 GQ relays 7.8 .307 Tape coming out direction Stopper (green) Stopper (red) General tolerance 0.1 mm .004 inch (2) Dimensions of plastic peel Orientation (indicates PIN No.1) stripe mm inch 2. Automatic insertion To maintain the internal function of the relay, the chucking pressure should not exceed the values below. Chucking pressure in the direction A : 9.8 N {1 kgf} or less Chucking pressure in the direction B : 9.8 N {1 kgf} or less Chucking pressure in the direction C : 9.8 N {1 kgf} or less A C B 21 dia. .827 dia. Stopper (green) Stopper (red) 2.0 .079 2) Tape and reel packing (A type) (1)-1 Tape dimensions 801 dia. 3.150.039 dia. mm inch Relay polarity bar (Z type) 1.50 +0.1 0 dia. .059 +.003 .0 dia. 2.0 .079 4.00 2.00 dia. .157 .079 dia. 1.75 .069 Max. 6.55 .256 0.40 .016 3302 dia. 12.992.079 dia. 13 dia. .512 dia. 11.5 .453 24.00.3 .945.012 11.1 .437 GQ relays 12.0 .472 9.0 .354 Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be also avoided. For general cautions for use, please refer to the "Cautions for use of Signal Relays" or "General Application Guidelines". Tape coming out direction General tolerance 0.1 mm .004 inch ASCTB7E 201209-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/