K1/K2 SEALED, ILLUMINATED ROCKER SWITCHES SNAP-IN ROCKERS LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS The K series rockers are rugged, high performance sealed switches designed for use under severe conditions found in marine, appliance, heavy equipment and industrial control applications. Sealed to IP68S with an optional panel seal available. The K1 series is offered in single pole configuration while the K2 series is available in single and double pole configurations. Both series offer illuminated models. Illumination can be independent or dependent of the switch position or a combination of both. A choice of red, green, clear or amber colored lenses are offered in illuminated models. Illumination options include incandescent, LED or neon light sources. K1 Series Single Pole Mounting is simple and quick; snaps into panel from the front. The OTTO snap-in design supports a variety of panel thicknesses with just one cutout size specified. ROCKER SWITCHES A choice of models are offered to handle power levels to 16 amps, 1/2 HP and low level electronic switching applications. OTTO can provide custom colors upon request. Value-added assemblies with wire leads are also available. Please consult the factory for assistance. K2 Series Single & Double Pole Features: * Withstands direct water spray * Watertight to IP68S * Fits industry standard panel openings for drop-in replacement of panel sealed & unsealed switches * Snap-in feature accommodates a wide range of panel cutouts * Switches up to 16 amps * UV and solvent resistant * Withstands extreme shock & vibration * Custom legends available * 2 & 3-position, momentary & maintained action * Incandescent, LED & neon illumination with independent & dependent light source options * UL & CSA recognized * Ignition protected * RoHS & WEEE compliant (R) Standard Characteristics/Ratings: ELECTRICAL RATINGS: Load Sea Level @ 28VDC or 125/250VAC, 60Hz Cycles Resistive 16A 25,000 Resistive 10A 50,000 Inductive 10A 25,000 Lamp 5A 25,000 Motor 0.5HP 25,000 DWV 1050Vrms except across light terminals Low Level Electrical Life: 10mA @ 30mV See Rating Chart LIGHTING: Light Source Rating Incandescent (VDC) 6V, 12V, 24V Neon (VAC) 125V, 250V LED (VDC) 2V, 6V, 12V, 24V Mechanical Life: 100,000 cycles Seal: IP68S Operating Temp Range: -30C to +85C MATERIALS: Specifications Subject To Change Without Notice Case: Thermoplastic Button: Thermoplastic Base: Thermoplastic Terminals/Contact: Brass, silver alloy with silver plate, gold flash for low level Terminal Hardware: Screws and lockwashers provided when applicable K1/K2 series recommended Quick Connect terminals: AMP 60253-2 for 12-16 AWG AMP 42100-2 for 14-18 AWG Mounting Hardware: None provided www.ottoexcellence.com 95 K2 SEALED, ILLUMINATED ROCKER SWITCHES SNAP-IN ROCKERS LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS, 1 & 2 POLES K2 PART K2 X Terminal Style/ Switch Rating A. Q.C./Std. B. Screw/Std. C. Solder/Std. D. Q.C./Low Level E. Screw/Low Level F. Solder/Low Level X X Switch Action/Circuit Position Position Position "A" "B" "C" Actuator Color/Style A. Red/Rocker B. Black/Rocker C. White/Rocker D. Red/Paddle E. Black/Paddle F. White/Paddle G. Red/Short Paddle Pinned H. Black/Short Paddle Pinned J. White/Short Paddle Pinned K. Red/Paddle Pinned Std. L. Black/Paddle Pinned Std. M. White/Paddle Pinned Std. N. Red/Rocker Pinned P. Black/Rocker Pinned R. White/Rocker Pinned NOTE: For custom colors, contact factory. A. B. C. D. E. F. G. H. J. K. L. M. N. P. Q. R. S. T. U. V. ON ON (ON) (ON) (ON) ON (ON) ON ON (ON) (ON) (ON) ON (ON) ON OFF ON OFF ON ON None None None None OFF OFF OFF None None None None OFF OFF OFF None None None None OFF OFF OFF ON OFF ON (ON) ON ON OFF ON OFF ON (ON) ON ON (ON) (ON) (ON) (ON) (ON) (ON) Circuit SPST SPDT SPST SPDT SPDT SPDT SPDT DPST DPDT DPST DPDT DPDT DPDT DPDT SPDT SPST DPDT DPST SPDT DPDT NOTE: ( ) denotes momentary action. Position "A" Position "B" Position "C" C1 C2 K2 Series Panel cutout dimensions are for reference only. Differences in panel material and thickness may require changes to the panel cutout for optimum fit. Optional Panel Gasket 0.062" thickness P/N 807038-1 0.031" thickness P/N 807038-2 0.25 Quick Connect Terminals 98 OTTO Full Line Catalog Specifications Subject To Change Without Notice K2 SEALED, ILLUMINATED ROCKER SWITCHES SNAP-IN ROCKERS LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS, 1 & 2 POLES NUMBER CODE X Light Type X X Lens Color Position "A" A. No Lens B. Red C. Green D. Amber E. Clear Position "C" A. No Lens B. Red C. Green D. Amber E. Clear X Light/Circuit Location Legend & Orientation A. No Light A. None B. F. Dependent Light ON in position "A" Wired to terms 1 & 7 Dependent Light ON in position "A" Wired to terms 1 & 7 Dependent Light ON in position "C" Wired to terms 2 & 8 C. B. C. D. E. F. G. H. J. K. L. M. N. P. R. G. Dependent Light ON in position "C" Wired to terms 2 & 8 D. Independent Light at position "A" Wired to terms 7 & 8 Dependent Light ON in position "A" Wired to terms 1 & 7 Independent Light at position "C" Wired to terms 7 & 8 ROCKER SWITCHES A. No Light B. 6V Incandescent C. 12V Incandescent D. 24V Incandescent E. 125VAC Neon F. 250VAC Neon G. 2V Red LED H. 2V Green LED J. 2V Amber LED K. 6V Red LED L. 6V Green LED M. 6V Amber LED N. 12V Red LED P. 12V Green LED Q. 12V Amber LED R. 24V Red LED S. 24V Green LED T. 24V Amber LED X H. E. Independent Light at position "C" Wired to terms 7 & 8 NOTES: * No momentary switches with dependent lights. * Neon lamp only to be coded with clear or amber lenses. * LED lenses must be clear or same color as LED. * K2 connector P/N C801765. * Recommended Quick Connect Terminals: AMP 60253-2 for 12-16 AWG wire with 0.160"-0.210" insulation OD AMP 42100-2 for 14-18 AWG wire with 0.100"-0.170" insulation OD * K2 panel plug P/N C100695-X. Contact factory for color selection. * No dependent light in OFF position. * All legends printed on actuators without lens(es) will be white except actuator codes C, F, J, M & R. * All legends printed on lenses will be white except on clear lens(es) will be black. * OTTO-02 denotes Mexico manufacturing location. Specifications Subject To Change Without Notice Independent Light ON in position "A" Wired to terms 7 & 8 Dependent Light ON in position "C" Wired to terms 2 & 8 J. Independent Light ON in position "A" Wired to terms 3 & 7 Independent Light ON in position "C" Wired to terms 4 & 8 Not available in DPDT D = Dependent Light I = Independent Light NOTES: * LED anode (+) terminal number shown in bold. * Light on OFF side must be independent. * Contact factory for multiple light types in the same switch. www.ottoexcellence.com 99