Versafit V2 Highly flame-retardant, low recovery temperature, metric-sized heat-shrinkable tubing Versafit V2 heat-shrinkable tubing is a cost-effective, environmentally friendly choice for many commercial applications. V2 tubing is made from a specially formulated, crosslinked polyolefin with low recovery temperature, excellent flexibility, and high flame-retardance (VW-1). are classified as environmentally hazardous substances. Unlike other typical flame-retardant tubings, V2 tubing is free of polybrominated biphenyls (PBBs) and poly-brominated biphenyl oxides (PBBOs). In Europe, these chemicals V2 tubing performs a variety of functions in commercial applications: Electrically insulates and protects in-line components, disconnect terminals, and splices. Compared to noncrosslinked materials, V2 tubing has a higher temperature rating and exhibits better thermal stability and resistance to physical abuse. PBBs PBBOs Bundles wires for very flexible light-duty harnesses. Strain-relieves electrical wire connections for long-term reliability. V2 tubing offers a faster, easier, more reliable replacement for molding in place, dip coating, and tape wrapping. V2 is UL-recognized and CSAcertified at 125C, 600 V, with UL VW-1 and CSA OFT flameretardancy ratings. Temperature rating Full recovery temperature: Continuous operating temperature: 90C -45C to 125C Specifications* (R) Type Versafit Raychem RW-3023 UL E35586 VW-1 CSA LR31929 VW-1 * When ordering, always specify latest issue. Dimensions (millimeters) W Expanded as supplied Fully recovered after heating D Size 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 9.0 10.0 As supplied D Inside diameter 1.6 0.2 2.1 0.2 2.6 0.2 3.1 0.2 3.6 0.2 4.1 0.3 4.6 0.3 5.6 0.3 6.6 0.3 7.6 0.3 8.6 0.3 9.6 0.3 10.4 0.3 Wall thickness (nominal) 0.20 0.20 0.25 0.25 0.25 0.25 0.25 0.30 0.30 0.30 0.30 0.30 0.30 Fully recovered d (max.) W (min.) Inside Wall diameter thickness** 0.50 0.33 0.75 0.35 1.00 0.43 1.25 0.43 1.50 0.43 1.75 0.43 2.00 0.43 2.50 0.56 3.00 0.56 3.50 0.56 4.00 0.56 4.50 0.56 5.00 0.56 Size 11.0 12.0 13.0 14.0 15.0 16.0 18.0 20.0 22.0 25.0 27.0 28.0 30.0 As supplied D Inside diameter 11.4 0.3 12.7 0.3 13.5 0.3 14.4 0.4 15.7 0.4 16.9 0.4 19.0 0.4 21.4 0.4 23.2 0.4 26.8 0.4 28.2 0.5 30.0 0.5 32.1 0.5 d Wall thickness (nominal) 0.30 0.30 0.35 0.35 0.35 0.35 0.40 0.40 0.45 0.45 0.45 0.45 0.45 **Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering information Colors Size selection Standard packaging Marking Ordering description Standard Black Nonstandard Red, blue, yellow, green, white, orange, brown, violet, gray Always order the largest size that will shrink snugly over the component being covered. On spools Marked with UL, CSA, and Japan -F- Mark legends. Specify product name, size, and color; for example, V2 2.0-0 (0=Black). Fully recovered d (max.) W (min.) Inside Wall diameter thickness** 5.5 0.56 6.0 0.56 6.5 0.66 7.0 0.68 7.5 0.68 8.0 0.68 9.0 0.76 10.0 0.76 11.0 0.89 12.5 0.89 12.5 0.89 14.0 0.89 15.0 0.89 Specification values Electrical Chemical Property Dimensions Longitudinal change ASTM D 2671 UL 224 Eccentricity (recovered) Tensile strength Ultimate elongation Secant modulus (as supplied) Low-temperature flexibility (1 hour at -30C/-22F) Heat shock (4 hours at 250C/482F) Heat aging (7 days at 158C/316F) Followed by tests for: Tensile strength Unit mm Requirement See reverse Method of test ASTM D 2671 percent percent percent MPa (psi) percent MPa (psi) +1, -5 +3, -3 30 maximum 10.3 (1500) minimum 200 minimum 172 (2.5 x 104) maximum No cracking ASTM D 2671 UL 224 ASTM D 2671 ASTM D 2671 ASTM D 2671 ASTM D 2671 UL 224 No cracking UL 224 UL 224 MPa (psi) Ultimate elongation Flexibility Dielectric withstand at 2500 V Dielectric breakdown percent Dielectric strength Restricted shrinkage Dielectric withstand at 2500 V Dielectric strength Volume resistivity Corrosive effect (7 days at 158C/316F) Copper stability (7 days at 158C/316F) kV/mm (volts/mil) seconds volts seconds kV/mm (volts/mil) ohm-cm Followed by test for: Ultimate elongation Flammability Water absorption (recovered) (24 hours at 23C/73F) Fungus resistance Followed by tests for: Tensile strength Ultimate elongation Dielectric strength percent percent 70% minimum of unaged specimens 100 minimum No cracking 60 minimum UL 224 UL 224 UL 224 ASTM D 2671 50% minimum of unaged specimens 19.7 (500) minimum Pass 60 minimum ASTM D 2671 ASTM D 2671 UL 224 ASTM D 2671 19.7 (500) minimum 1014 minimum No corrosion ASTM D 2671 ASTM D 2671 ASTM D 2671 No brittleness, glazing, cracking, or severe discoloration of tubing. No pitting or blackening of copper. ASTM D 2671 100 minimum Pass 0.5 maximum ASTM D 2671 UL 224, VW-1 ASTM D 2671 ISO 846 Method B MPa (psi) percent kV/mm (volts/mil) 10.3 (1500) minimum 200 minimum 19.7 (500) minimum ASTM D 2671 ASTM D 2671 ASTM D 2671 Note: Consult RW-3023 for specific details about test procedures. Versafit and Raychem are trademarks of Tyco Electronics Corporation. Users should independently evaluate the suitability of the product for their application. Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025-1164 USA Tel: (800) 926-2425 (US & Canada) Tel: +1 (650) 361-3860 (All other countries) Faraday Road Dorcan, Swindon, SN3 5HH United Kingdom Tel: +44 1793 528171 3816 Noborito, Tama-ku Kawasaki, Kanagawa 214-8533 Japan Tel: +81 44 900 5102 Asia Pacific Headquarters 26 Ang Mo Kio, Industrial Park 2 Singapore 569507 Tel: +65 4866 151 All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporation's only obligations are those in the Standard Terms and Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the product. Tyco Electronics Corporation's Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing without notification to the Buyer which do not affect compliance with any applicable specification. For more information about this product visit www.tycoelectronics.com (c) 1995, 2002 Tyco Electronics Corporation Printed in USA 1654072 Revised 04/04 Physical Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: V2-18.0-0-FSP-SM