Plastic package has Underwriters Laboratory Flammability Classification 94V-O.
Glass passivated junction.
500W peak pulse power capability with a 10/1000µs waveform,
repetition rate (duty cycle): 0.01%.
Excellent clamping capability.
Low incremental surge resistance.
Fast response time: typically less than 5.0ns from 0 volt to VBR min.
Ideal for data line applications.
High temperature soldering guaranteed: 265℃/10 seconds/.375”,
(9.5mm) lead length, 5lbs., (2.3kg) tension.
M
Case: JEDEC DO-15 molded plastic over a passivated junction.
Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026.
Polarity: Color band denotes cathode.
Mounting Position: Any.
Weight: 0.015 ounce, 0.4 grams.
M
Ratings at 25℃ ambient temperature unless otherwise specified.
Note: Non-repetitive current pulse, per Fig. 3 and derated above TA = 25℃ per Fig. 2.
DOA
RATING SYMBOL VALUE UNIT
Peak Pulse Power Dissipation on 10/1000μs waveform. (Note 1，Fig. 1) PPPM Minimum 500 Watts
Peak Pulse Current on 10/1000μs waveform. (Note 1，Fig. 3) IPPM See Table Amps
Steady State Power Dissipation at TL =75℃，Lead length .375” (9.5mm).
( Fig. 5)
PM(AV) 3.0 Watts
Operating junction and Storage Temperature Range. TJ, TSTG
-55 to +175 ℃
Transient 9ROWDJH6XSSUHVVRUV
SAC Series MERITEK
FEATURES
MECHANICAL DATA
MAXIMUM RATINGS AND CHARACTERISTICS
DO-204AC/DO-15
All specifications are subject to change without notice.
1
Rev 7
Reverse
Stand-Off
Voltage
Minimum
Breakdown
Voltage
@IT=1.0mA
Maximum
Reverse
Leakage
@VRWM
Maximum
Clamping
Voltage
@IPP=5.0A
Maximum
Peak
Pulse
Current
FIG.3
Maximum
Junction
Capacitance
@0V
Working
Inverse
Blocking
Voltage
Inverse
Blocking
Leakage
Current
Peak
Inverse
Blocking
Voltage
Part
Number
VRWM(V) VBR(V) IR(µA) VC(V) IPP(A) pF VWIB(V) IIB(mA) VPIB(V)
SAC5.0 5.0 7.60 300 10.0 44.0 50 75 1.0 100
SAC6.0 6.0 7.90 300 11.2 41.0 50 75 1.0 100
SAC7.0 7.0 8.33 300 12.6 38.0 50 75 1.0 100
SAC8.0 8.0 8.89 100 13.4 36.0 50 75 1.0 100
SAC8.5 8.5 9.44 50 14.0 34.0 50 75 1.0 100
SAC10 10.0 11.10 5 16.3 29.0 50 75 1.0 100
SAC12 12.0 13.30 1 19.0 25.0 50 75 1.0 100
SAC15 15.0 16.70 1 23.6 20.0 50 75 1.0 100
SAC18 18.0 20.00 1 28.8 15.0 50 75 1.0 100
SAC22 22.0 24.40 1 35.4 14.0 50 75 1.0 100
SAC26 26.0 28.90 1 42.3 11.1 50 75 1.0 100
SAC30 30.0 33.30 1 48.6 10.0 50 75 1.0 100
SAC36 36.0 40.00 1 60.0 8.6 50 75 1.0 100
SAC45 45.0 50.00 1 77.0 6.8 50 150 1.0 200
SAC50 50.0 55.50 1 88.0 5.8 50 150 1.0 200
Millimeters Inches
Item Min. Max. Min. Max.
L 25.40 - 1.000 -
T 5.80 7.60 0.230 0.300
d 2.60 3.60 0.104 0.140
s 0.71 0.86 0.028 0.034
L L T
d s
DIA.
DIA.
DO-204AC/DO-15
Transient 9ROWDJH6XSSUHVVRUV
SAC Series MERITEK
PACKAGE DIMENSIONS
SPECIFICATIONS
2
Rev 7
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
Figure 3 - Pulse Waveform Figure 4 - AC Line Protection Application
Figure 5 - Steady State Power Dissipation Derating Curve
0.1
1
10
100
1000
0.000001 0.00001 0.0001 0.001
PPPM-Peak Pulse Power (kW)
td-Pulse Width (Sec.)
0
25
50
75
100
0 25 50 75 100 125 150 175
Percentage of Rated Power (%)
TL Lead Temperature (ºC)
A verage Power
Peak Power
(Single Pulse)
Low Capacitance
Application Note: Device must be used with two
units in parallel, opposite in polarity as shown in
circuit for AC signal line protection.
I
PPM - Peak Pulse Current, % I
RSM
0
0
50
10 0
150
1.0 2.0 3.0 4.0
t
r=10µsec
Peak Value
I
PPM
I
PPM
2
TJ=2 5°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of I
PPM
10/1000µsec. Waveform
as defined by R.E.A
t
d
t-Time (ms)
Half Value
I
PPM ( )
0
0.5
1
1.5
2
2.5
3
3.5
0 25 50 75 100 125 150 175 200
TL-Lead Temperature (ºC)
Steady State Power dissipation (W)
Transient 9ROWDJH6XSSUHVVRUV
SAC Series MERITEK
RATING AND CHARACTERISTIC CURVES (TA: 25°C UNLESS OTHERWISE SPECIFIED)
3
Rev 7
