SPECIFICATION CONTROL DRAWING
Tyco Electronics Corporation
305 Constitution Drive
Menlo Park, CA 94025, USA
Raychem
Products
TITLE:
COAXIAL TERMINATION KIT
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO.: CWT-4XXX-W122-5/9
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DATE:
7/6/98
DOC ISSUE:
2
DRAWN BY:
JRIVERA
REPLACES:
D981001
DCR NUMBER:
D981255
PROD. REV.
SEE TABLE
SCALE:
None
SIZE:
A
SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Cd18 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
3. MELTABLE RING: Thermally stabilized thermoplastic. Color:clear.
4. MELTABLE RING: Thermally stabilized thermoplastic. Color:blue.
5. CONDUCTOR LEAD: Cross-linked polyolefin insulated stranded, tin plated copper. Color:white.
6. GROUND LEAD: Cross-linked polyolefin insulated stranded, tin plated copper. Color:green.
APPLICATION
1. These parts are designed to provide an environment protected coaxial termination on cables, rated for at least +65°C minimum,
meeting the dimensional criteria listed, having bare copper, tin or silver plated shields and conductors.
2. Temperature range: -55°C to +125°C. Install using Raychem-approved convection heating tools in accordance with Raychem
installation procedure RPIP-824-00.
Part selection: For best results, prepare the cable as shown:
JOD: Cable jacket must be less than øA min.
DOD: Cable dielectric must be less than øB min.
SOD: Cable shield must be greater than øE min.
POD: Conductor must be between øC min and 0.3(.012).
* A trademark of Tyco Electronics Corporation.
Product Revision Product Dimensions Cable Dimensions
Product Name øA
min
øB
min
øC
min
Typical
øE
min
G M N
CWT-4058-W122-5/9 A 6.0
(0.235)
3.1
(0.120)
1.0
(0.040)
RG 58 3.3
(0.130)
19.0
(0.750)
12.5
(0.500)
6.0
(0.235)
CWT-4059-W122-5/9 A 7.0
(0.275)
3.9
(0.155)
1.0
(0.040)
RG59
3.7
(0.145)
19.0
(0.750)
12.5
(0.500)
6.0
(0.235)
CWT-4174-W122-5/9 A 4.5
(0.175)
1.7
(0.065)
1.0
(0.040)
RG 174 2.3
(0.090)
19.0
(0.750)
12.5
(0.500)
6.0
(0.235)
