mounting to printed circuit boards using both through-hole soldered and through-hole press-fit techniques. Both
crimp and clamp cable termination processes are used for this series. BNC connectors are used for signal,
data and video transmission applications.
Mating face sealing for BNC connectors between plug and jack (mated) according to IP 54. The classifications
are general statements for the relevant series. Individual connectors may deviate from the values shown. If in
doubt, please consult our engineers.
Mechanical Characteristics
Durability (mating cycles) ≥ 500
Material: spring contacts CuBe2; CuPb1.15Ni1
Material: outer conductor CuZn39Pb3
Material: other metal parts CuZn39Pb3
Material: insulators PTFE; PE PTFE; PE
Material: gaskets Silicone
Finish: Inner conductor Cu1Ni2Au0.8
Finish: Outer conductor Cu2Ni5
Finish: Other metal parts Cu2Ni5
Climatic Characteristics
Climatic category acc. to IEC 60068 - 1
Types with PTFE insulator 40/155/21
Types with PE insulator 40/75/21
Electrical Characteristics
Contact resistance inner conductor ≤ 20 mΩ
Contact resistance outer conductor ≤ 5 mΩ
Insulation resistance ≥ 5 GΩ
Voltage proof 1.5 kVeff/50 Hz
Impedance 50 Ω/(75 Ω)
Return loss: Straight style ≥ 20 dB/3 GHz (50 Ω types)
Return loss: Angle style ≥ 17.7 dB/3 GHz (50 Ω types)
Working voltage ≤ 500 Veff/50 Hz
2 / 3
© 2011 Telegärtner Karl Gärtner GmbH. Technische Änderungen vorbehalten. Technical changes reserved. www.telegaertner.com
Lerchenstr. 35, D-71144 Steinenbronn, Tel. +49 (0) 7157 125 100, Fax +49 (0) 7157 125 120, E-Mail: info@telegaertner.com