17-21/GVC-AMPB/3T - EVERLIGHT ELECTRONICS

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 1 of 10

Device No. : SZDSE-171-G29 Prepared date:14-Oct-2006 Prepared by: Zhifang Pan

Technical Data Sheet

0805 Package Chip LED(1.1mm Height)

17-21/GVC-AMPB/3T

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Mono-color type.

․Pb-free.

․The product itself will remain within RoHS compliant version.

Descriptions

․The 17-21 SMD Taping is much smaller than lead

frame type components, thus enable smaller board

size, higher packing density, reduced storage space

and finally smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

․Indoor signboard use.

Device Selection Guide

Chip

Part No. Material Emitted Color

Lens Color

17-21/GVC-AMPB/3T AlGaInP Green Water Clear

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 2 of 10

Device No. : SZDSE-171-G29 Prepared date:14-Oct-2006 Prepared by: Zhifang Pan

17-21/GVC-AMPB/3T

Package Outline Dimensions

+

-

1.05

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 3 of 10

Device No. : SZDSE-171-G29 Prepared date:14-Oct-2006 Prepared by: Zhifang Pan

17-21/GVC-AMPB/3T

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

Forward Current IF 25 mA

Peak Forward Current

(Duty 1/10 @1KHz) IFP 60 mA

Power Dissipation Pd 60 mW

Electrostatic Discharge ESD 2000 V

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

Soldering Temperature Tsol Reflow Soldering:260 ℃ for 10 sec

Hand Soldering:350℃ for 3 sec

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition

Luminous Intensity Iv 18.0 ----- 72.0 mcd

Viewing Angle 2θ1/2 ---- 140 ---- deg

Peak Wavelength λp ---- 568 ---- nm

Dominant Wavelength λd 563.5 ---- 571.5 nm

Spectrum Radiation

Bandwidth △λ ---- 20 ---- nm

Forward Voltage VF 1.75 ---- 2.35 V

IF=20mA

Reverse Current IR ---- ---- 10 μA VR=5V

Notes:

1.Tolerance of Luminous Intensity ±10%

2.Tolerance of Dominant Wavelength ±1nm

3.Tolerance of Forward Voltage ±0.1V

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 4 of 10

Device No. : SZDSE-171-G29 Prepared date:14-Oct-2006 Prepared by: Zhifang Pan

17-21/GVC-AMPB/3T

Bin Range Of Dom. Wavelength

Groups Bin Min Max Unit Condition

C13 563.5 565.5

C14 565.5 567.5

C15 567.5 569.5

A

C16 569.5 571.5

nm IF=20mA

Bin Range Of Luminous Intensity

Bin Min Max Unit Condition

M 18.0 28.5

N 28.5 45.0

P 45.0 72.0

mcd IF=20mA

Bin Range Of Forward Voltage

Groups Bin Min Max Unit Condition

0 1.75 1.95

1 1.95 2.15

B

2 2.15 2.35

nm IF=20mA

Notes:

1.Tolerance of Luminous Intensity ±15%

2.Tolerance of Dominant Wavelength ±1nm

3.Tolerance of Forward Voltage ±0.1V

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 5 of 10

Device No. : SZDSE-171-G29 Prepared date:14-Oct-2006 Prepared by: Zhifang Pan

17-21/GVC-AMPB/3T

Typical Electro-Optical Characteristics Curves

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 6 of 10

Device No. : SZDSE-171-G29 Prepared date:14-Oct-2006 Prepared by: Zhifang Pan

xxxxxx

xxxxxxxxxxxx

xxxx

xxxxxxxx

RoHS

17-21/GVC-AMPB/3T

Label explanation

CAT: Luminous Intensity (mcd)

HUE: Dom. Wavelength (nm)

REF: Forward Voltage (V)

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 7 of 10

Device No. : SZDSE-171-G29 Prepared date:14-Oct-2006 Prepared by: Zhifang Pan

17-21/GVC-AMPB/3T

Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm , Unit = mm

Moisture Resistant Packaging

Aluminum moistue-proof bag LabelDesiccant

Label

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 8 of 10

Device No. : SZDSE-171-G29 Prepared date:14-Oct-2006 Prepared by: Zhifang Pan

17-21/GVC-AMPB/3T

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level : 90 %

LTPD : 10 %

No. Items Test Condition

Test

Hours/Cycles Sample

Size Ac/Re

1 Reflow Soldering

Temp. : 260℃±5℃

Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min

∫ 5 min

L : -40℃ 15min

300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min

∫ 10 sec

L : -10℃ 5min

300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 9 of 10

Device No. : SZDSE-171-G29 Prepared date:14-Oct-2006 Prepared by: Zhifang Pan

17-21/GVC-AMPB/3T

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection , otherwise slight voltage shift

will cause big current change ( Burn out will happen ).

2. Storage time

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 10 of 10

Device No. : SZDSE-171-G29 Prepared date:14-Oct-2006 Prepared by: Zhifang Pan

17-21/GVC-AMPB/3T

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of the

hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com