PX-200 Crystal Oscillator PX-200 Features * * * * Applications Miniature Hybrid Design 16 Pin Flatpack Frequency Range: 4 MHZ to 500 MHZ Previous Model: CO-487 Performance Specifications Parameter Min Typ Max Units Condition Frequency Stabilities1 vs. operating temperature range (referenced to +25C) -5 -10 -25 -50 -50 -100 +5 +10 +25 +50 +50 +100 ppm ppm ppm ppm ppm pbm 0... +50C 0... +50C 0... +70C (standard) -55... +85C -55... +125C -55... +125C Initial tolerance -50 -25 -15 -10 -1 +50 +25 +15 +10 +1 ppm ppm ppm ppm ppm @+25C @+25C @+25C @+25C Set via external capacitor (custom number required) vs. aging / 1 year vs. aging / year (following years) -3 -2 +3 +2 ppm ppm after 30 days of operation Supply Voltage (Vs) Supply voltage (Standard) 14.75 15.0 15.25 VDC RF Output Sinewave Signal Output Power (Standard) +7 dBm Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Performance Specifications Parameter Output Power (Option) Min Typ Max +13 Units Condition dBm (custom number required) 1 Additional Parameters Phase Noise3 (typical 4-100 MHZ) -100 -125 -140 -145 dBc/Hz dBc/Hz dBc/Hz dBc/Hz 100 Hz 1 kHz 10 kHz 100 kHz Screen Testing of Above Models MIL-STD-883 METHOD SCREEN TEST Standard Options CLASS X CLASS B Stabilization Bake (150C) -- X X Seal Test (Gross and Fine) 1014, Cond A2 X X Temperature Cycling (Thermal Shock) 1010, Cond B X Burn-in, operating 160 hours @125C -- X 2001, Cond A X Acceleration (5000g in Y1 axis) CLASS S Class S screen test requirements include 24 hour additional bake-out, 80 hour additional burnin, thermal shock, PIND test and radiographic inspection in addition to Class B Screening. Has major cost impact. Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Outline Drawing / Enclosure Pin Connections Dimensions in inches Type A Code Height "H" Pin Length "L" 0 0.17 0.4 8 Ground 9, 10 Output 11 <200 MHz: no connection >200 Mhz: 0V, Case 16 Supply Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Ordering Information PX - 200 0 - A E T - F K X S - 10M0000000 Frequency Product Family PX: PXO Screening Option S: "S" Level screening B: "B" Level screening X: No Screening Package 25 x 25 mm Height 0: A 0.17" Enable Code X: No Option Supply Voltage A: 15 Vdc Stability Code A: 5ppm B: 10ppm F: 25ppm K: 50ppm S: 100ppm RF Output Code E: Sinewave (+7 dBm) Accuracy Code B: 10ppm D: 15ppm F: 25ppm K: 50ppm Temperature Range A: -55C to +85C C: -55C to +125C P: 0C to +50C T: 0C to +70C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Europe: Asia: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 2/23/2009 daf Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com