AM5 MINIATURE SWITCHES WITH HIGH PRECISION AM5 (QV) SWITCHES FEATURES * High precision as a result of designing ideal spring by using computer analysis O.P. 14.70.4mm * Reliable design with shock resistance min. 980 m/s2 * High inrush resistance 160A * Wide variety of contact ratings and terminal types * UL/C-UL, ENEC/VDE approved 27.8 15.9 10.3 TYPICAL APPLICATION * Home appliances * Vending machines * Amusement and communication equipment * Copies * General industrial machines Standard type contact gap is 1mm. Please consult us if you need more than 1mm contact gap. Compliance with RoHS Directive CONSTRUCTION 1. Silver alloy contact 2. Gold clad contact CONTACT ARRANGEMENT NC NO COM All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AM5 TERMINALS .187 Quick-connect terminal .187 Quick-connect/solder terminal Bottom COM terminal .250 Quick-connect terminal Bottom COM terminal NC 1 1 2 3 2 3 NC NO C NO C Side COM terminal Side COM terminal NC NC 1 2 3 1 NO 2 3 NO C C Dimensions .187 Quick-connect terminal Dimensions 1.55 dia. 1.65 +0.1 0 dia. 4.75 6.4 6.35 +0.05 -0.07 4.15 0.15 3.2 6.35 2 8.05 +0.1 -0.05 Dimensions .187 Quick-connect/solder terminal R1.2 1.2 R0.8 4.75 6.4 3.2 6.35 OPERATION FORCE CHART 7th digit of Part Number/Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever 3 0.49N 0.59N 0.29N 0.15N 0.29N 0.59N 0.29N 4 0.98N 1.08N 0.59N 0.29N 0.59N 1.08N 0.59N Operation Force, Max. by actuator 5 1.96N 2.16N 1.18N 0.59N 1.18N 2.16N 1.18N 6 2.94N 3.14N 1.77N 0.88N 1.77N 3.14N 1.77N All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 7 3.92N 4.12N 2.35N 1.18N 2.35N 4.12N 2.35N AM5 ORDERING INFORMATION 0.1A type Ex. AM5 Type of switch AM5: QV switch 0 0 1 Contact rating Terminals 00: 0.1 A (Gold clad) 1: Bottom COM, SPDT 2: Bottom COM, SPST-NC 3: Bottom COM, SPST-NO 4: Side COM, SPDT 5: Side COM, SPST-NC 6: Side COM, SPST-NO 0 C 5 3 Actuators Terminals 0: Pin plunger A: .187 Quick-connect/solder terminal 1: Short hinge lever C: .187 Quick-connect terminal 2: Hinge lever 3: Long hinge lever 4: Simulated roller lever 5: Short roller lever 6: Roller lever Remarks: 1. Not every combination is available. Please refer to the table, "PRODUCT TYPES". 2. Please refer to the Standard Chart regarding Agency Standard Operating force by pin plunger (max.) 3: 0.49 N 4: 0.98 N 5: 1.96 N Agency standard 3: UL/C-UL rated, ENEC/VDE approved Operating force by pin plunger (max.) 3: 0.49 N Agency standard 3: UL/C-UL rated, ENEC/VDE approved 6A type Ex. AM5 Type of switch AM5: QV switch 0 6 1 Contact rating Terminals 06: 6 A (Silver alloy) 1: Bottom COM, SPDT 2: Bottom COM, SPST-NC 3: Bottom COM, SPST-NO 4: Side COM, SPDT 5: Side COM, SPST-NC 6: Side COM, SPST-NO 0 C 5 3 Actuators Terminals 0: Pin plunger A: .187 Quick-connect/solder terminal 1: Short hinge lever C: .187 Quick-connect terminal 2: Hinge lever 3: Long hinge lever 4: Simulated roller lever 5: Short roller lever 6: Roller lever Remarks: 1. Not every combination is available. Please refer to the table, "PRODUCT TYPES". 2. Please refer to the Standard Chart regarding Agency Standard 11A type Ex. AM5 1 1 1 0 C 4 3 N Operating force Agency Contact by pin plunger standard (max.) AM5: 11: 11 A 1: Bottom COM, SPDT 0: Pin plunger 4: 0.98 N 3: UL/C-UL N: Cadmium A: .187 Quick-connect/solder terminal QV switch (Silver alloy) 2: Bottom COM, SPST-NC 1: Short hinge lever rated, free C: .187 Quick-connect terminal 3: Bottom COM, SPST-NO 2: Hinge lever ENEC/ D: .250 Quick-connect terminal 4: Side COM, SPDT 3: Long hinge lever VDE 5: Side COM, SPST-NC 4: Simulated roller lever approved 6: Side COM, SPST-NO 5: Short roller lever 6: Roller lever Remarks: 1. Not every combination is available. Please refer to the table, "PRODUCT TYPES". 2. Please refer to the Standard Chart regarding Agency Standard Type of switch Contact rating Terminals Actuators Terminals 16A type Ex. AM5 1 6 1 0 C 5 3 N Operating force Agency Contact by pin plunger standard (max.) AM5: 16: 16 A 1: Bottom COM, SPDT 0: Pin plunger 5: 1.96 N 3: UL/C-UL N: Cadmium A: .187 Quick-connect/solder terminal QV switch (Silver alloy) 2: Bottom COM, SPST-NC 1: Short hinge lever 6: 2.94 N rated, free C: .187 Quick-connect terminal 3: Bottom COM, SPST-NO 2: Hinge lever 7: 3.92 N ENEC/ D: .250 Quick-connect terminal 4: Side COM, SPDT 3: Long hinge lever VDE 5: Side COM, SPST-NC 4: Simulated roller lever approved 6: Side COM, SPST-NO 5: Short roller lever 6: Roller lever Remarks: 1. Not every combination is available. Please refer to the table, "PRODUCT TYPES". 2. Please refer to the Standard Chart regarding Agency Standard Type of switch Contact rating Terminals Actuators Terminals All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AM5 PRODUCT TYPES 0.1A type (Gold clad contact) .187 Quick-connect terminal 1) Bottom COM terminal Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever Operating force, Max. 0.49N 0.98N 1.96N 0.59N 1.08N 2.16N 0.29N 0.59N 1.18N 0.15N 0.29N 0.59N 0.29N 0.59N 1.18N 0.59N 1.08N 2.16N 0.29N 0.59N 1.18N Contact arrangement SPDT AM50010C33 AM50010C43 AM50010C53 AM50011C33 AM50011C43 AM50011C53 AM50012C33 AM50012C43 AM50012C53 AM50013C33 AM50013C43 AM50013C53 AM50014C33 AM50014C43 AM50014C53 AM50015C33 AM50015C43 AM50015C53 AM50016C33 AM50016C43 AM50016C53 Contact arrangement SPST-NC SPST-NO AM50020C33 AM50030C33 AM50020C43 AM50030C43 AM50020C53 AM50030C53 AM50021C33 AM50031C33 AM50021C43 AM50031C43 AM50021C53 AM50031C53 AM50022C33 AM50032C33 AM50022C43 AM50032C43 AM50022C53 AM50032C53 AM50023C33 AM50033C33 AM50023C43 AM50033C43 AM50023C53 AM50033C53 AM50024C33 AM50034C33 AM50024C43 AM50034C43 AM50024C53 AM50034C53 AM50025C33 AM50035C33 AM50025C43 AM50035C43 AM50025C53 AM50035C53 AM50026C33 AM50036C33 AM50026C43 AM50036C43 AM50026C53 AM50036C53 Contact arrangement SPDT AM50040C33 AM50040C43 AM50040C53 AM50041C33 AM50041C43 AM50041C53 AM50042C33 AM50042C43 AM50042C53 AM50043C33 AM50043C43 AM50043C53 AM50044C33 AM50044C43 AM50044C53 AM50045C33 AM50045C43 AM50045C53 AM50046C33 AM50046C43 AM50046C53 Contact arrangement SPST-NC SPST-NO AM50050C33 AM50060C33 AM50050C43 AM50060C43 AM50050C53 AM50060C53 AM50051C33 AM50061C33 AM50051C43 AM50061C43 AM50051C53 AM50061C53 AM50052C33 AM50062C33 AM50052C43 AM50062C43 AM50052C53 AM50062C53 AM50053C33 AM50063C33 AM50053C43 AM50063C43 AM50053C53 AM50063C53 AM50054C33 AM50064C33 AM50054C43 AM50064C43 AM50054C53 AM50064C53 AM50055C33 AM50065C33 AM50055C43 AM50065C43 AM50055C53 AM50065C53 AM50056C33 AM50066C33 AM50056C43 AM50066C43 AM50056C53 AM50066C53 2-1) Side COM terminal Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever Operating force, Max. 0.49N 0.98N 1.96N 0.59N 1.08N 2.16N 0.29N 0.59N 1.18N 0.15N 0.29N 0.59N 0.29N 0.59N 1.18N 0.59N 1.08N 2.16N 0.29N 0.59N 1.18N All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AM5 6A type (Silver alloy contact) .187 Quick-connect terminal 1) Bottom COM terminal Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever Operating force, Max. 0.49N 0.59N 0.29N 0.15N 0.29N 0.59N 0.29N Contact arrangement SPDT AM50610C33 AM50611C33 AM50612C33 AM50613C33 AM50614C33 AM50615C33 AM50616C33 Contact arrangement SPST-NC SPST-NO AM50620C33 AM50630C33 AM50621C33 AM50631C33 AM50622C33 AM50632C33 AM50623C33 AM50633C33 AM50624C33 AM50634C33 AM50625C33 AM50635C33 AM50626C33 AM50636C33 Contact arrangement SPDT AM50640C33 AM50641C33 AM50642C33 AM50643C33 AM50644C33 AM50645C33 AM50646C33 Contact arrangement SPST-NC SPST-NO AM50650C33 AM50660C33 AM50651C33 AM50661C33 AM50652C33 AM50662C33 AM50653C33 AM50663C33 AM50654C33 AM50664C33 AM50655C33 AM50665C33 AM50656C33 AM50666C33 2-1) Side COM terminal Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever Operating force, Max. 0.49N 0.59N 0.29N 0.15N 0.29N 0.59N 0.29N Remarks: Also .187 Quick-connect/solder terminal is available. When ordering, change the eighth digit of part number C to A. <ex.> .187 Quick-connect terminal .187 Quick-connect/solder terminal AM50610C4 AM50610A4 11A type (Silver alloy contact) .187 Quick-connect terminal 1) Bottom COM terminal Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever Operating force, Max. 0.98N 1.08N 0.59N 0.29N 0.59N 1.08N 0.59N Contact arrangement SPDT AM51110C43N AM51111C43N AM51112C43N AM51113C43N AM51114C43N AM51115C43N AM51116C43N Contact arrangement SPST-NC SPST-NO AM51120C43N AM51130C43N AM51121C43N AM51131C43N AM51122C43N AM51132C43N AM51123C43N AM51133C43N AM51124C43N AM51134C43N AM51125C43N AM51135C43N AM51126C43N AM51136C43N Contact arrangement SPDT AM51140C43N AM51141C43N AM51142C43N AM51143C43N AM51144C43N AM51145C43N AM51146C43N Contact arrangement SPST-NC SPST-NO AM51150C43N AM51160C43N AM51151C43N AM51161C43N AM51152C43N AM51162C43N AM51153C43N AM51163C43N AM51154C43N AM51164C43N AM51155C43N AM51165C43N AM51156C43N AM51166C43N 2-1) Side COM terminal Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever Operating force, Max. 0.98N 1.08N 0.59N 0.29N 0.59N 1.08N 0.59N Remarks: 1. Also .187 Quick-connect/solder terminal is available. When ordering, change the eighth digit of part number C to A. <ex.> .187 Quick-connect terminal .187 Quick-connect/solder terminal AM51110C4 AM51110A4 2. .250 Quick-connect terminal is available. When ordering, change the eighth digit of part number C to D. <ex.> .187 Quick-connect terminal .250 Quick-connect terminal AM51110C4 AM51110D4 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AM5 16A type (Silver alloy contact) .187 Quick-connect terminal 1) Bottom COM terminal Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever Operating force, Max. 1.96N 2.94N 3.92N 2.16N 3.14N 4.12N 1.18N 1.77N 2.35N 0.59N 0.88N 1.18N 1.18N 1.77N 2.35N 1.18N 3.14N 4.12N 1.18N 1.77N 2.35N Contact arrangement SPDT AM51610C53N AM51610C63N AM51610C73N AM51611C53N AM51611C63N AM51611C73N AM51612C53N AM51612C63N AM51612C73N AM51613C53N AM51613C63N AM51613C73N AM51614C53N AM51614C63N AM51614C73N AM51615C53N AM51615C63N AM51615C73N AM51616C53N AM51616C63N AM51616C73N Contact arrangement SPST-NC SPST-NO AM51620C53N AM51630C53N AM51620C63N AM51630C63N AM51620C73N AM51630C73N AM51621C53N AM51631C53N AM51621C63N AM51631C63N AM51621C73N AM51631C73N AM51622C53N AM51632C53N AM51622C63N AM51632C63N AM51622C73N AM51632C73N AM51623C53N AM51633C53N AM51623C63N AM51633C63N AM51623C73N AM51633C73N AM51624C53N AM51634C53N AM51624C63N AM51634C63N AM51624C73N AM51634C73N AM51625C53N AM51635C53N AM51625C63N AM51635C63N AM51625C73N AM51635C73N AM51626C53N AM51636C53N AM51626C63N AM51636C63N AM51626C73N AM51636C73N Contact arrangement SPDT AM51640C53N AM51640C63N AM51640C73N AM51641C53N AM51641C63N AM51641C73N AM51642C53N AM51642C63N AM51642C73N AM51643C53N AM51643C63N AM51643C73N AM51644C53N AM51644C63N AM51644C73N AM51645C53N AM51645C63N AM51645C73N AM51646C53N AM51646C63N AM51646C73N Contact arrangement SPST-NC SPST-NO AM51650C53N AM51660C53N AM51650C63N AM51660C63N AM51650C73N AM51660C73N AM51651C53N AM51661C53N AM51651C63N AM51661C63N AM51651C73N AM51661C73N AM51652C53N AM51662C53N AM51652C63N AM51662C63N AM51652C73N AM51662C73N AM51653C53N AM51663C53N AM51653C63N AM51663C63N AM51653C73N AM51663C73N AM51654C53N AM51664C53N AM51654C63N AM51664C63N AM51654C73N AM51664C73N AM51655C53N AM51665C53N AM51655C63N AM51665C63N AM51655C73N AM51665C73N AM51656C53N AM51666C53N AM51656C63N AM51666C63N AM51656C73N AM51666C73N 2-1) Side COM terminal Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Short roller lever Roller lever Operating force, Max. 1.96N 2.94N 3.92N 2.16N 3.14N 4.12N 1.18N 1.77N 2.35N 0.59N 0.88N 1.18N 1.18N 1.77N 2.35N 2.16N 3.14N 4.12N 1.18N 1.77N 2.35N Remarks: 1. .187 Quick-connect/solder terminal is available. When ordering, change the eighth digit of part number C to A. <ex.> .187 Quick-connect terminal .187 Quick-connect/solder terminal AM51610C5 AM51610A5 2. .250 Quick-connect terminal is available. When ordering, change the eighth digit of part number C to D. <ex.> .187 Quick-connect terminal .250 Quick-connect terminal AM51610C5 AM51610D5 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AM5 DATA Gold-clad type Range of low-level current voltage Current (mA) 500 100 50 10 5 2 1 4 8 12 16 20 24 DC voltage (V) SPECIFICATIONS 1. Contact rating Type Gold clad contact Voltage 0.1A type 6A type Silver alloy contact 11A type 16A type Gold clad contact for low level circuit 250V AC 125V AC 30V DC 250V AC 125V AC 125V DC 250V AC 125V AC 125V DC 250V AC 125V AC 125V DC 6V DC 12V DC 24V DC Resistive load (cos=1) 0.1A 0.1A 0.1A 6A 6A 0.5A 11A 11A 0.6A 16A 16A 0.6A 5mA 2mA 1mA Inductive load (cos nearly equal 0.6 to 0.7) 0.1A 0.1A 0.1A 3A 3A 0.5A 6A 6A 0.6A 10A 10A 0.6A -- -- -- Remark: The inductive load for DC should have a time constant of 7 ms or less. 2. Characteristics Type Expected life (min.) Mechanical Electrical Insulation resistance Between terminals Dielectric Between terminals and other strength exposed metal parts Between terminals and ground Contact resistance (initial) Vibration resistance (by pin plunger) Shock resistance (by pin plunger) (contact opening: max. 1msec.) Allowable operating speed Maximum operating cycle rate Ambient temperature Weight 16, 11, 6A type (Silver alloy) 0.1A type (Gold clad) 107 operations (at 60 cpm) 105 operations (at rated load) 105 Operations (at rated load 20 cpm) 2 x 106 operations (at low-level circuit rating) 100M (at 500V DC) 1,000Vrms for 1 min. 2,000Vrms for 1 min. 2,000Vrms for 1 min. 50m (by voltage drop at 1A 6 to 8V DC) 50m (by voltage drop at 0.1A 6 to 8V DC) 10 to 55Hz at simple amplitude of 0.75mm (Contact opening: max. 1msec.) O.F. 0.49N max. type Min. 98m/s2 O.F. 0.15N to 0.49N max. type Min. 98m/s2 O.F. 0.98N max. type Min. 196m/s2 O.F. 0.98N max. type Min. 196m/s2 O.F. 1.96N to 3.92N max. type Min. 294m/s2 O.F. 1.96N max. type Min. 294m/s2 0.1 to 1,000mm/sec. (at pin plunger) 600cpm -25 to +105C (Not freezing below 0C) 6.3g All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AM5 3. Operating characteristics Pin plunger 7th digit of part No. Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position mm 3 0.49N 0.12N 4 0.98N 0.25N 5 1.96N 0.49N 1.4 0.4 1.0 14.70.4 6 2.94N 0.74N 7 3.92N 0.98N 3 0.59N 0.098N 4 1.08N 0.20N 5 2.16N 0.39N 1.6 0.5 0.9 15.30.5 6 3.14N 0.59N 7 4.12N 0.78N 3 0.29N 0.049N 4 0.59N 0.098N 5 1.18N 0.20N 3.2 1.0 1.4 15.31.0 6 1.77N 0.29N 7 2.35N 0.39N 3 0.15N 0.025N 4 0.29N 0.049N 5 0.59N 0.098N 7.5 2.0 2.2 15.32.6 6 0.88N 0.15N 7 1.18N 0.20N 3 0.29N 0.049N 4 0.59N 0.098N 5 1.18N 0.20N 3.2 1.0 1.4 18.51.0 6 1.77N 0.29N 7 2.35N 0.39N 3 0.59N 0.098N 4 1.08N 0.20N 5 2.16N 0.39N 1.6 0.5 0.9 20.70.5 6 3.14N 0.59N 7 4.12N 0.78N 3 0.29N 0.049N 4 0.59N 0.098N 5 1.18N 0.20N 3.2 1.0 1.4 20.71.0 6 1.77N 0.29N 7 2.35N 0.39N Short hinge lever 7th digit of part No. Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position mm Hinge lever 7th digit of part No. Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position mm Long hinge lever 7th digit of part No. Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position mm Simulated roller lever 7th digit of part No. Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position mm Short roller lever 7th digit of part No. Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position mm Roller lever 7th digit of part No. Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position mm All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AM5 mm General tolerance: 0.25 DIMENSIONS 1. Pin plunger Bottom COM terminal .187 Quick-connect terminal .250 Quick-connect terminal 1.55 dia. 1.65 +0.1 dia. 0 6.35 +0.05 -0.07 6.4 4.75 3.2 2 6.35 1.8 27.8 20.2 2.8 (P.T.) 1.4 max. 3.95 3.1 +0.25 -0.05 dia. 2.8 4.1 5.65 (O.P.) 14.7 0.4 15.9 10.3 0.1 NC 0.5 2 1 C 2.8 13.5 +0.25 3.1 -0.05 NC 2.8 10.3 22.2 0.1 3 3.4 0.15 +0.25 3.1 -0.05 3.95 0.8 9.3 10.6 2 C 6.65 3.4 0.15 3.1 +0.25 -0.05 dia. 4.1 3.6 1 NO 3 2.8 (O.P.) 14.7 0.4 15.9 10.3 0.1 6.5 9.3 1.8 27.8 20.2 2.8 NO 12 1 (P.T.) 1.4 max. 4.15 0.15 8.05 +0.1 -0.05 9.7 22.2 0.1 39.45 10.3 42.7 Side COM terminal .187 Quick-connect terminal .250 Quick-connect terminal 1.55 dia. 1.65 +0.1 dia. 0 +0.05 6.35 -0.07 6.4 4.75 3.2 2 6.35 (P.T.) 1.4 max. 3.1 +0.25 -0.05 dia. 2.8 2.8 (O.P.) 14.7 0.4 15.9 10.3 0.1 NC 2 1 3 0.5 4.1 5.65 9.3 6.5 3.1 +0.25 -0.05 3.95 2.8 NC 2 1 3 2.8 22.2 0.1 3.4 0.15 +0.25 3.1 -0.05 10.3 NO 0.8 9.3 10.6 9.8 22.2 0.1 42.7 39.45 2. Short hinge lever 1.55 dia. 6.4 4.75 3.2 6.35 22.1 0.5 27.8 20.2 1.8 3.1 +0.25 -0.05 dia. 2.8 5.0 4.1 5.65 (O.P.) 15.3 0.5 15.9 10.3 0.1 NC 2 1 3 3.4 0.15 9.3 6.5 6.65 13.5 22.2 0.1 0.5 NO C 2.8 3.95 C 3.4 0.15 +0.25 3.1 -0.05 3.1 +0.25 -0.05 dia. 4.1 3.6 (O.P.) 14.7 0.4 15.9 10.3 0.1 6 (P.T.) 1.6 max. 8.05 +0.1 -0.05 1.8 27.8 20.2 2.8 NO C 2.8 (P.T.) 1.4 max. 1.8 27.8 20.2 4.15 0.15 10.3 39.45 The dimensions other than drawn above are same as pin plunger type. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 10.3 AM5 mm General tolerance: 0.25 3. Hinge lever 1.55 dia. 6.4 4.75 3.2 6.35 35.8 0.5 27.8 20.2 (P.T.) 3.2 max. 1.8 4.1 5.65 (O.P.) 14.3 1.0 15.9 10.3 0.1 NC 0.5 2 1 9.3 3.1 6.65 3.4 0.15 +0.25 -0.05 6.5 NO 3 C 2.8 5.0 3.1 +0.25 -0.05 dia. 2.8 13.5 10.3 22.2 0.1 39.45 The dimensions other than drawn above are same as pin plunger type. 4. Long hinge lever 1.55 dia. 6.4 4.75 3.2 (P.T.) 7.5 max. 6.35 59.5 0.5 1.8 27.8 20.2 5.0 3.1 +0.25 -0.05 dia. 2.8 4.1 5.65 (O.P.) 15.3 2.6 15.9 10.3 0.1 NC 3.1 +0.25 -0.05 0.5 2 1 9.3 2.8 6.5 NO 3 C 6.65 3.4 0.15 13.5 10.3 22.2 0.1 39.45 The dimensions other than drawn above are same as pin plunger type. 5. Simulated roller lever 1.55 dia. 6.4 4.75 3.2 6.35 (P.T.) 3.2 max. R3 (O.P.) 18.5 1.0 5.0 32.8 0.5 27.8 20.2 1.8 3.1 +0.25 -0.05 dia. 2.8 4.1 5.65 15.9 10.3 0.1 NC 2 1 3 2.8 3.1 +0.25 -0.05 3.4 0.15 9.3 6.5 6.65 13.5 22.2 0.1 0.5 NO C 10.3 39.45 The dimensions other than drawn above are same as pin plunger type. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AM5 mm General tolerance: 0.25 6. Short roller lever 1.55 dia. 6.4 4.75 3.2 6.35 20.6 0.5 27.8 20.2 (P.T.) 1.6 max. 4.9 1.8 2.8 4.8 3.1 +0.25 -0.05 dia. (O.P.) 20.7 0.5 4.1 5.65 15.9 10.3 0.1 NC 0.5 2 1 9.3 2.8 3.1 6.65 3.4 0.15 +0.25 -0.05 6.5 NO 3 C 13.5 10.3 22.2 0.1 39.45 The dimensions other than drawn above are same as pin plunger type. 7. Hinge Roller lever 1.55 dia. 6.4 3.2 (P.T.) 3.2 max. 4.75 6.35 34.2 0.5 4.9 1.8 27.8 20.2 2.8 4.8 3.1 +0.25 -0.05 dia. (O.P.) 20.7 1.0 4.1 5.65 15.9 10.3 0.1 NC 2 1 3 2.8 3.1 +0.25 -0.05 3.4 0.15 22.2 9.3 6.5 6.65 13.5 0.1 0.5 NO C 10.3 39.45 The dimensions other than drawn above are same as pin plunger type. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AM5 NOTES USE OF CONNECTOR 1. Fastening of the switch body 1) Use flat filister head M3 screws to mount switches with less than a 0.49 N*m torque. Use of screws washers or adhesive lock is recommended to prevent loosening of the screws. 2) Check insulation distance between ground and each terminal. 3) When the operation object is in the free position, force should not be applied directly to the actuator or pin plunger. Also force should be applied to the pin plunger from vertical direction to the switch. 4) The standard value of overtravel should be the range of 70% to 100% of the rated O.T. value. 2. Soldering operations Soldering should be accomplished in less than 5 seconds, with a 60 watt iron. Care should be taken not to apply force to the terminal during soldering. 3. Varience of operating characteristics When specifying the switch, allow +20% to the listed operating and release forces. 4. Environment Avoid using the switches in the following conditions; * In corrosive gases, such as silicon gas * In a dusty environment 5. For switching of inductive loads (relays, solenoids, etc.) 1) In order to prevent damage to contacts due to the occurrence of arcing, an arc absorbing circuit should be applied. 2) Care should be taken that occurrence in AC load possibly shorten the expected life. 6. Please assure the quality and reliability of the switch under the actual service condition. 7. It is recommended to use Gold clad contact type in use of low-level circuit rating. 8. Cover and body are press-fitted. Once it is taken apart, it may cause change of characteristics. 9. Cover and body are press-fitted. Once it is taken apart, it may cause change of characteristics. The .187 Quick-connect terminal and .250 Quick-connect terminal accept the all kinds of 1 polarity connectors and the "Positive Lock" connectors Please contact the manufacturers directly. * receptacle terminal .250 series .187 series * "Positive Lock" connector. (equipped with the lock construction of low insertion type) .187 type .187 type (1 polarity) (2 polarities) .250 type (1 polarity) All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. .187 type (3 polarities) <CUSTOM ORDERED PRODUCT> MINIATURE SWITCHES WITH HIGH PRECISION (Contact gap: more than 1mm type) Compliance with RoHS Directive AM5 (QV) SWITCHES * Conforms with the IEC950 standards for secondary circuit insulation distance. Assures a contact gap of at least 1mm * Can handle high-capacity loads on the secondary side that S-type size switches cannot * High inrush and hard impacts resistant * Excellent operating position precision * UL/CSA/VDE/SEMKO/TUV approved PRODUCT TYPES Contact rating: 0.1A, 6A, 11A, 16A (250V AC) Terminal shape: .187 Quick connect terminal, .187 Quick connect/solder terminal For other specifications, please consult us. DIMENSIONS AND NOTES Please refer to Standard QV switches catalog for dimensions and notes. SPECIFICATIONS * Contact ratings (0.1 to 16 A) Voltage Type 250V AC 125V AC 125V DC 0.1A 0.1A 0.1A 0.1A Resistive load (cos = 1.0) 6A 11A 6A 11A 6A 11A 0.5A 0.6A 16A 16A 16A 0.6A 0.1A 0.1A 0.1A 0.1A Inductive load (cos ] 0.6 to 0.7) 6A 11A 16A 3A 6A 10A 3A 6A 10A 0.5A 0.6A 0.6A * 0.1A type minimum load: 6V DC 5mA (Resistive load) 12V DC 2mA (Resistive load) 24V DC 1mA (Resistive load) Remark: The inductive load for DC should have a time constant of 7 ms or less. Please consult us for further information. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd.