IRF630M IRF630MFP N-channel 200V - 0.35 - 9A - TO-220 /TO-220FP Mesh OverlayTM Power MOSFET General features VDSS (@Tjmax) RDS(on) IRF630M 200 V < 0.40 9A IRF630MFP 200 V < 0.40 9A Type ID ) s ( t c u d o ) r s ( P t c e t u Description e d l o o r s P b Internal schematic diagram e O t e l ) o s ( s t b c u O d Applications o ) r s P ( t c e t u e l d o o r s P b OOrder codes e t e l o s b O 1 Extremely high dv/dt capability Very low intrinsic capacitances Gate charge minimized 3 3 TO-220 2 1 2 TO-220FP This power MOSFET is designed using the company's consolidated strip layout-based MESH OVERLAYTM process. This technology matches and improves the performances compared with standard parts from various sources. Isolated TO220 option simplifies assembly and cuts risk of accidental short circuit in crowded monitor PCB's. Switching application Part number Marking Package Packaging IRF630M IRF630M TO-220 Tube IRF630MFP IRF630MFP TO-220FP Tube June 2006 Rev 2 1/14 www.st.com 14 Contents IRF630M - IRF630MFP Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 3 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Test circuit ................................................ 9 ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 IRF630M - IRF630MFP 1 Electrical ratings Electrical ratings Table 1. Absolute maximum rating Symbol Parameter Value IRF630M VDS VDGR VGS ID IDM (2) PTOT dv/dt (3) 200 V Drain-gate voltage (RGS = 20 kW) 200 V Gate- source voltage 20 Drain current (pulsed) 36 Total dissipation at TC = 25C 75 Derating factor 0.6 e t e l Peak diode recovery voltage slope Tstg Storage temperature 5 o s b -- O ) e t le Max. operating junction temperature 1. Limited only by maximum temperature allowed s ( t c o s b O - 2. Pulse width limited by safe operating area 3. ISD 9A, di/dt 300A/s, VDD V(BR)DSS, Tj TJMAX. Table 2. u d o Thermal data Pr c u d (t s) Rthj-case Thermal resistance junction-case max e t e ol Rthj-amb bs O t e l o s b O Thermal resistance junction-ambient max o r P e Tl Table 3. Symbol 9 5.7 Insulation winthstand voltage (DC) V 9 Drain current (continuos) at TC = 100C VISO Tj IRF630MFP Drain-source Voltage (VGS = 0) Drain current (continuos) at TC = 25C ID Unit Maximum lead temperature for soldering purpose ) s ( t (1) (1) c u d 5.7 36 o r P Pr 30 0.24 uc 5 A A A ) s t( od 2500 W W/C V/ns V -65 to 150 C 150 C TO-220 TO-220FP 1.67 4.17 C/W 62.5 C/W 300 C Avalanche characteristics Parameter IAR Avalanche current, repetitive or not-repetitive (pulse width limited by Tj Max) EAS Single pulse avalanche energy (starting Tj=25C, Id=Iar, Vdd=50V) Value Unit 5 A 350 mJ 3/14 Electrical characteristics 2 IRF630M - IRF630MFP Electrical characteristics (TCASE=25C unless otherwise specified) Table 4. On/off states Symbol Parameter Test conditions V(BR)DSS Drain-source breakdown voltage ID = 250A, VGS = 0 IDSS Zero gate voltage drain current (VGS = 0) VDS = max rating VDS = max rating, TC = 125 C IGSS Gate-body leakage current (VDS = 0) VGS = 20V VGS(th) Gate threshold voltage VDS = VGS, ID = 250A RDS(on) Static drain-source on resistance VGS = 10V, ID = 4.5A Min. Typ. Max. 200 Unit V 1 50 A A 100 nA 3 4 V 0.35 0.40 Min. Typ. Max. Unit 3 4 ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O Table 5. Symbol Dynamic Parameter Test conditions gfs (1) Forward transconductance VDS > ID(on) x RDS(on)max, ID = 4.5A Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance VDS = 25V, f = 1 MHz, VGS = 0 540 90 35 700 pF pF pF tr(Voff) tf Turn-on delay time Rise time Off-voltage rise time Fall time VDD = 100V, ID = 4.5A RG = 4.7 VGS = 10V 10 15 12 12 14 20 17 17 ns ns ns ns Qg Qgs Qgd Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD = 160V, ID = 9A, VGS = 10V 31 7.5 9 45 nC nC nC td(on tr 1. Pulsed: pulse duration = 300s, duty cycle 1.5% 4/14 2 S IRF630M - IRF630MFP Table 6. Symbol ISD ISDM (1) VSD (2) trr Qrr IRRM Electrical characteristics Sourse drain diode Parameter Test conditions Min. Typ. Source-drain current Source-drain current (pulsed) Forward on voltage ISD = 9A, VGS = 0 Reverse recovery time I = 9A, di/dt = 100A/s Reverse recovery charge SD VDD = 50V, Tj = 150C Reverse recovery current 170 0.95 11 Max. Unit 9 36 A A 1.5 V ns nC A ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O 1. Pulse width limited by safe operating area. 2. Pulsed: Pulse duration = 300 s, duty cycle 1.5 % 5/14 Electrical characteristics IRF630M - IRF630MFP 2.1 Electrical characteristics (curves) Figure 1. Safe operating area for TO-220 Figure 2. Thermal impedance for TO-220 ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Output characterisics Figure 6. Transfer characteristics 6/14 IRF630M - IRF630MFP Figure 7. Transconductance Electrical characteristics Figure 8. Static drain-source on resistance ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations Figure 11. Normalized gate threshold voltage vs temperature Figure 12. Normalized on resistance vs temperature 7/14 Electrical characteristics IRF630M - IRF630MFP Figure 13. Source-drain diode forward characteristics ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O 8/14 IRF630M - IRF630MFP 3 Test circuit Test circuit Figure 14. Unclamped Inductive load test circuit Figure 15. Unclamped inductive waveform ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O Figure 16. Switching times test circuit for resistive load Figure 17. Gate charge test circuit Figure 18. Test circuit for inductive load switching and diode recovery times 9/14 Package mechanical data 4 IRF630M - IRF630MFP Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O 10/14 IRF630M - IRF630MFP Package mechanical data TO-220 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O c 0.49 D 15.25 E 10 0.70 0.019 0.027 15.75 0.60 0.620 10.40 0.393 0.409 0.106 e 2.40 2.70 0.094 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 0.154 0.645 28.90 1.137 oP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 11/14 Package mechanical data IRF630M - IRF630MFP TO-220FP MECHANICAL DATA mm. DIM. MIN. A inch TYP 4.4 MAX. MIN. TYP. 4.6 0.173 0.181 MAX. B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O F1 1.15 1.5 0.045 0.067 F2 1.15 1.5 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 L2 0.409 16 28.6 30.6 1.126 1.204 L4 9.8 L5 2.9 10.6 .0385 0.417 3.6 0.114 L6 0.141 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 O 3 3.2 0.118 0.126 B D A E L3 0.630 L3 L6 F2 H G G1 F F1 L7 L2 12/14 L5 1 2 3 L4 IRF630M - IRF630MFP 5 Revision history Revision history Table 7. Revision history Date Revision Changes 21-Jun-2004 1 Preliminary version 28-Jun-2006 2 New template, no content change ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O 13/14 IRF630M - IRF630MFP ) s ( t c u d o ) r s ( P t c e t u e d l o o r s P b e O t e l ) o s ( s t b c u O d o ) r s P ( t c e t u e l d o o r s P b O e t e l o s b O Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14