FUJITSU TAKAMISAWA CONNECTOR CATALOG MEMORY CARD CONNECTORS (JEIDA/PCMCIA CONFORMABLE) 560H SERIES FEATURES * The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer Memory Card International Association (PCMCIA) standards Ver. 4. * Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.). Incorrect insertion is prevented. Hot system plugging is possible (contact detection). * Plugs have an easy-to-use ejection mechanism. * Raised mounting type connectors (under which components can be mounted) and low-profile connectors are available. * In addition to connectors for type I and type II cards, a connector for type III cards has been provided. * The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided mounting are available. PIN CONNECTOR (PLUG) CONTACT LENGTH SPECIFICATIONS Specification Item Contact type Pin No. Contact length Operating temperature range - 55C to + 85C Power, ground pins 1, 17, 34, 35, 51, 68 Current rating DC 0.5 A Card detection pins 36, 67 3.5 mm (0.137 in.) Voltage rating AC 250 V Other signal pins Others 4.25 mm (0.167 in.) Contact resistance 40 m max (6 VDC, 0.1 A) Insulation resistance 1000 M min. (500 VDC) Dielectric withstanding voltage 500 VAC for 1 minute Insertion/withdrawal life Industrial environment: 5,000 times Office environment: 10,000 times 5.0 mm (0.196 in.) MATERIALS Specification Item Plug body: PPS resin Insulating material : 6T nylon (for type III card connector) Ejector: Polyester : PPS resin (for SMT and type III card connectors) Conductor Copper alloy Plating Contact: Gold over palladium over nickel (PAGOS) Terminal: Palladium 1 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, SMT TYPE (WITH NO EJECTOR, TO BE MOUNTED ON THE BACK OF THE PC BOARD) DIMENSIONS For 3.3 mm (0.130 in.) to 5.0 mm (0.197 in.) thick cards (type I and type II cards) Part number: FCN-568P068-G/02-V4 For a 3.3 mm (0.130 in.) thick card (type I card) Part number: FCN-568P068-G/01-V4 56.72 (2.23) 3.175 (0.125) 4.75 (0.187) No.1 49.02 (1.930) 2- o 2.54 (0.1) No.35 No.34 0.7 (0.028) 2.7 (0.106) 3.5 (0.138) 19.05 (0.75) No.34 No.68 0.9 (0.0354) 0.7 (0.028) No.35 1.85 (0.073) 1.4 (0.055) No.68 1.575 (0.062) 5.15 1.75 (0.069) 4.3 (0.169) 52.91 (2.083) 0.635 (0.025)x(68-1) =42.545 (1.675) 0.635 (0.025) 12.7 (0.5) 1.575 (0.062) 0.635 (0.025) 12.7 (0.5) 19.05 (0.75) 3.175 (0.125) 4.75 (0.187) 3.15 (0.124) 0.635 (0.025) x (68 - 1) = 42.545 (1.675) 3.15 (0.124) 56.72 (2.23) 52.91 (2.083) No.1 49.02 (1.930) 2-o2.54 (0.1) Unit: mm (in.) PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) 2.54 (0.1) +- 00.1 (0.0039) 0.635 (0.025) x (68-1) = 42.545 (1.675)0.1 (0.0039) 0.635 (0.025) 0.05 (0.0020) o 2.54 (0.1) -+ 00.1 (0.0039) 3.9 (0.154) 0.05 (0.0020) 6.9 (0.272) 0.05 (0.0020) No.68 No.67 Y portion No.35 No.36 No.33 No.1 No.2 No.34 0.45 (0.0177) 0.05 (0.0020) Z portion 49.02 (1.930) 0.05 (0.0020) 0.635 (0.025) 0.05 (0.0020) No.1 No.2 2-R 0.5 (0.020) 0.45 (0.0177) 0.05 (0.0020) No.33 No.34 Detail of Y portion 1.2 7( 0.0 5) Detail of Z portion Unit: mm (in.) 2