DSEI 2x 30 DSEI 2x 31 Fast Recovery Epitaxial Diode (FRED) VRRM V V 1000 1000 miniBLOC, SOT-227 B E72873 Type DSEI 2x 30-10B DSEI 2x 31-10B DSEI 2x30 DSEI 2x31 Symbol Test Conditions Maximum Ratings (per diode) IFRMS IFAVM yy IFRM TVJ = TVJM TC = 50C; rectangular, d = 0.5 tP < 10 ms; rep. rating, pulse width limited by TVJM 70 30 375 A A A IFSM TVJ = 45C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 200 210 A A TVJ = 150C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 185 195 A A TVJ = 45C 200 180 A2s A2s 170 160 2 As A2s -40...+150 150 -40...+150 C C C 100 W 2500 V~ Features I2t t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ = 150C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ TVJM Tstg Ptot TC = 25C VISOL 50/60 Hz, RMS IISOL 1 mA Md Applications Mounting torque Terminal connection torque (M4) 1.5/13 1.5/13 Weight 30 Nm/lb.in. Nm/lb.in. g Symbol Test Conditions Characteristic Values (per diode) typ. max. IR TVJ = 25C TVJ = 25C TVJ = 125C VR = VRRM VR = 0.8 * VRRM VR = 0.8 * VRRM 750 250 7 mA mA mA VF IF = 30 A; TVJ = 150C TVJ = 25C 2 2.4 V V VT0 rT For power-loss calculations only TVJ = TVJM 1.5 12.5 V mW 1.25 K/W K/W 0.05 trr IF = 1 A; -di/dt = 100 A/ms; VR = 30 V; TVJ = 25C 35 50 ns IRM VR = 540 V; IF = 30 A; -diF/dt = 240 A/ms L 0.05 mH; TVJ = 100C 16 18 A IFAVM rating includes reverse blocking losses at TVJM, VR = 0.8 VRRM, duty cycle d = 0.5 Data according to IEC 60747 IXYS reserves the right to change limits, test conditions and dimensions (c) 2000 IXYS All rights reserved Antiparallel diode for high frequency switching devices Anti saturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating and melting Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages RthJC RthCK International standard package miniBLOC (ISOTOP compatible) Isolation voltage 2500 V~ 2 independent FRED in 1 package Planar passivated chips Very short recovery time Extremely low switching losses Low IRM-values Soft recovery behaviour High reliability circuit operation Low voltage peaks for reduced protection circuits Low noise switching Low losses Operating at lower temperature or space saving by reduced cooling 009 VRSM IFAVM = 2x 30 A VRRM = 1000 V trr = 35 ns 1-2 http://store.iiic.cc/ DSEI 2x 30, 1000 V DSEI 2x 31, 1000 V Fig. 1 Forward current versus voltage drop. Fig. 2 Recovery charge versus -diF/dt. Fig. 3 Peak reverse current versus -diF/dt. Fig. 4 Dynamic parameters versus junction temperature. Fig. 5 Recovery time versus -diF/dt. Fig. 6 Peak forward voltage versus diF/dt. Dimensions Fig. 7 Transient thermal impedance junction to case. miniBLOC SOT-227 B M4 screws (4x) supplied (c) 2000 IXYS All rights reserved Dim. Millimeter Min. Max. Inches Min. Max. A B 31.50 7.80 31.88 8.20 1.240 0.307 1.255 0.323 C D 4.09 4.09 4.29 4.29 0.161 0.161 0.169 0.169 E F 4.09 14.91 4.29 15.11 0.161 0.587 0.169 0.595 G H 30.12 37.80 30.30 38.20 1.186 1.489 1.193 1.505 J K 11.68 8.92 12.22 9.60 0.460 0.351 0.481 0.378 L M 0.76 12.60 0.84 12.85 0.030 0.496 0.033 0.506 N O 25.15 1.98 25.42 2.13 0.990 0.078 1.001 0.084 P Q 4.95 26.54 5.97 26.90 0.195 1.045 0.235 1.059 R S 3.94 4.72 4.42 4.85 0.155 0.186 0.174 0.191 T U 24.59 -0.05 25.07 0.1 0.968 -0.002 0.987 0.004 V W 3.30 0.780 4.57 0.830 0.130 19.81 0.180 21.08 2-2 http://store.iiic.cc/