General Purpose Chip Resistors ( Lead-Free for RMP 04/06/10/12 series Standard ) Document No. TRM-XX0S010G Issued Date 2011/04/26 page number 1/12 1. Scope : This specification applies for the RMP series chip resistors made by TA-I. 2. Construction: Over Coat Conductor Sn Plating Resistive Element Ni Plating Ceramic Substrate 3. Type Designation: RMP 10 Product Code Size RM : Chip Resistor J Tolerance Packaging Power Rating 04-0402(1005) - 1/10 W J-5% 06-0603(1608) - 1/8 W G-2% 10-0805(2012) - 1/4 W F-1% 12-1206(3216) - 1/2 W T 103 Nominal Resistance T-Paper Tape 3 digits, e.g.,: (E-24) 103 = 10K 4 digits, e.g., : (E-96) 1540 = 154 TA-I TECHNOLOGY CO., LTD Document No. TRM-XX0S010G General Purpose Chip Resistors ( Lead-Free for RMP 04/06/10/12 series Standard ) Issued Date 2011/04/26 page number 2/12 4. Dimensions : UNIT: mm Type RMP04 L +0.10 1.00 W C d t 0.500.05 0.250.15 0.300.15 0.300.05 0.800.10 0.300.20 0.400.20 0.400.10 1.250.15 0.400.20 0.600.20 0.500.10 1.500.20 0.500.30 0.700.20 0.500.10 -0.05 RMP06 1.500.10 RMP10 2.000.15 RMP12 3.100.20 TA-I TECHNOLOGY CO., LTD Document No. TRM-XX0S010G General Purpose Chip Resistors ( Lead-Free for RMP 04/06/10/12 series Standard ) Issued Date 2011/04/26 page number 3/12 5. Ratings & Characteristics : Type Resistance Range() Power Max. Max. T.C.R Rating Rating Working Over- Load (PPM/) Voltage at 70 Voltage Voltage F(1%) E-96&E-24 G(2%) E-24 J(5%) E-24 RMP04 1/10W Refer 5.2 50V 100V 100 1 -10K RMP06 1/8W Refer 5.2 150V 300V 100 1 -47K RMP10 1/4W Refer 5.2 200V 400V 100 1 -100K RMP12 1/2W Refer 5.2 200V 400V 100 1 -100K 5.1 Derating Curve : For resistors operated at ambient temperature over 70 , power rating shall be derated in accordance with figure 1. P max. 100 Power ratio ( % ) 50 0 -55 50 70 100 125 155 Ambient Temp. ( C ) Figure 1 TA-I TECHNOLOGY CO., LTD General Purpose Chip Resistors ( Lead-Free for RMP 04/06/10/12 series Standard ) Document No. TRM-XX0S010G Issued Date 2011/04/26 page number 4/12 5.2 Rated Voltage: The rated voltage is calculated by the following formula: E= P*R E=Rated Voltage(V) P=Rated Power(W) R=Resistance Value() E.G. : What is RMP06JT102 the rated voltage ? RMP06JT102 P:1/8W E= 0.125(W) * 1000() ; R:102 = 1K = 1000 = 11.18 (V) TA-I TECHNOLOGY CO., LTD General Purpose Chip Resistors ( Lead-Free for RMP 04/06/10/12 series Standard ) Document No. TRM-XX0S010G Issued Date 2011/04/26 page number 5/12 6. Reliability Tests: Test Items Temperature Coefficient of Resistance Reference standard Condition of Test MIL-STD-202F Method 304 ; +25 +125 Test Limits(R ) 100 PPM/ JIS-C5201-1-4.8 Short Time Overload MIL-R-55342D -Para. 4.7.5; 2.5 X rated voltage for 5 sec F : (1% + 0.1 ) G / J : (2% + 0.1 ) JIS-C5201-1-4.13 High Temperature Exposure MIL-STD-202 (Storage) Method 108 1000 hrs. Measurement conclusion. @ at T=125C. Unpowered. F : (2% + 0.1 ) 242 hours after test G / J : (2% + 0.1 ) F : (0.5% + 0.05 ) G / J : (1% + 0.1 ) Remark : R10 :F /G/J: (1% + 0.1 ) Temperature Cycling JESD22 1000 Cycles (-55C to +125C) Measurement Method JA-104 at 242 hours after test conclusion. Moisture Resistance MIL-STD-202 Method 106 1000 hrs , T=24 hours / Cycle . Notes : Steps F : (1% + 0.05 ) 7a& 7b not required. Unpowered . G / J : (2% + 0.1 ) Biased Humidity MIL-STD-202 Method 103 1000 hours 85C/85%RH. Note: Specified F : (3% + 0.1 ) conditions: 10% of operating power. G / J : (3% + 0.1 ) Measurement at 242 hours after test conclusion. Operational Life MIL-STD-202 Method 108 1000 hours TA=125C at rated power. Measurement at 242 hours after test conclusion. F : (1% + 0.05 ) Remark : G / J : (3% + 0.1 ) Specification of test PCB :By TA-I Mounted Q'ty : Mounted 2 pcs on 1 PCB . Resistance to Soldering Heat MIL-STD-202 Method 210 Condition B : Immerse the specimens in and eutectic solder at 2605 for 101S . Solderability J-STD-002 2455 solder, 20.5 sec dwell. Solder : Sn96.5 / Ag3.0 / Cu0.5 Board Flex ( Bending ) AEC-Q200-005 3mm deflection Terminal Strength (SMD) AEC-Q200-006 F : (0.5% + 0.05 ) G / J : (1% + 0.1 ) > 95% area covered with tin F : (0.5% + 0.05 ) G / J : (1% + 0.1 ) Pressure X kgf a R0.5 pressure rod for 60 sec Force : F : (0.5% + 0.05 ) 0201: NA G / J : (1% + 0.1 ) 0402 : 0.5Kg 0805 : 1.0Kg 0603 : 0.5Kg 1206 : 1.8Kg TA-I TECHNOLOGY CO., LTD General Purpose Chip Resistors ( Lead-Free for RMP 04/06/10/12 series Standard ) Document No. TRM-XX0S010G Issued Date 2011/04/26 page number 6/12 7. Marking 7.1 2% & 5%(E24) : RMP06/ RMP10 / RMP12 Resistance value is expressed by 3 digits, the first two digits represent the significant figures of nominal resistance value in, and the third digit represents exponent for base of 10. E.G. :, 102 2 = 10x10 = 1000 = 1K 102 7.2 1% (E96 ) : RMP10 / RMP12 Resistance value is expressed by 4 digits or 3digits , the first three digits represent the significant figures of nominal resistance value in, and the fourth digit represents exponent for base of 10. E.G. : 0 1000 = 100x10 = 100 1000 7.3 1% ( E96): RMP06 When the marking space is too small in such small-sized resistors as RM06, the marking can not made by 4 digits and may be made by two digits combined with one English capital. Symbol for E96 series nominal resistance value Symbol 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 E96 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 Symbol 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 E96 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 Symbol 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 E96 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 Symbol 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 E96 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 TA-I TECHNOLOGY CO., LTD Document No. TRM-XX0S010G General Purpose Chip Resistors ( Lead-Free for RMP 04/06/10/12 series Standard ) 20 21 22 23 24 158 162 165 169 174 44 45 46 47 48 280 287 294 301 309 68 69 70 71 72 Issued Date 2011/04/26 page number 7/12 499 511 523 536 549 92 93 94 95 96 887 909 931 953 976 Symbol for multipliers Symbol multipliers A 0 10 B 1 10 C 2 10 D 3 10 E 4 10 F 5 10 G 6 10 H 7 10 X -1 10 Y -2 10 Z -3 10 0 E.G : 01A = 100x10 = 100 01A Notes : When the resistance value is not in the list of E96 , 3 digitals with underline in E-24 series is used as mark . E.G. : 0603 , 120 , 1% Marking is 121 121 7.5 No Marking for RMP 04 8. Taping & Reel : 8.1 Taping Dimensions 8.1.1 4 mm pitch paper: Packing Paper Type A B RMP06 1.10.1 1.90.1 RMP10 1.60.15 2.40.2 RMP12 2.00.15 3.60.2 W F E P1 P2 P0 D0 T 0.640.1 8.00.2 3.50.05 1.750.1 4.00.1 2.00.05 4.00.1 +0.1 1.5 -0 0.840.1 TA-I TECHNOLOGY CO., LTD General Purpose Chip Resistors Document No. TRM-XX0S010G ( Lead-Free for RMP 04/06/10/12 series Standard ) 8.1.2 Packing Paper Type A B RMP04 0.70.05 1.20.05 RMP06 1.10.1 1.90.1 W 8.00.2 Size 2011/04/26 page number 8/12 2 mm pitch paper : F 3.50.05 E P1 P2 2.00.1 2.00.1 2.00.1 2.00.1 1.750.1 P0 D0 +0.1 4.00.1 1.5 -0 T 0.450.1 0.640.1 Paper Tape Package Type Issued Date 4 mm pitch 2 mm pitch 178mm/R 178mm/R RMP 04 RMP 06 5000 10000 RMP 10 5000 RMP 12 5000 10000 TA-I TECHNOLOGY CO., LTD General Purpose Chip Resistors ( Lead-Free for RMP 04/06/10/12 series Standard ) 8.2 Document No. TRM-XX0S010G Issued Date 2011/04/26 page number 9/12 Reel Specifications: UNIT: mm Type A B C RMP 04 / 06 RMP10 /12 178.0 2.0 60.0 1.0 13.0 1.0 W T 9.0 1.0 11.5 1.0 8.3. Peel -off force : Peel -off force of paper and blister tape is in accordance with "JIS-C5202 " that is , 0.1 to 0.7 N at a peel-off speed of 300 mm / minute. pull 300 mm/min top cover tape 1015 standard: 0.1 ~ 0.7 N carrier tape TA-I TECHNOLOGY CO., LTD General Purpose Chip Resistors ( Lead-Free for RMP 04/06/10/12 series Standard ) Document No. TRM-XX0S010G Issued Date 2011/04/26 page number 10/12 9. Label : 9.1 Manufacture Label : Date Code Resistance Tolerance Type QTY: 5000 PCS 102 Lot No: 00860166K- 0008 J 0603 9.2 Customer Label ( By customer request ): Lead-Free Products TA-I TECH Product Spec. Customer No: LEAD FREE 0603 5%(T) 1K 105A702723 RMP06JT102 04.05.21 Date Year Month 10. Recommended land patterns : Land pattern Type RMP RMP RMP RMP a Size 04 (0402 ) 06 (0603 ) 10 (0805 ) 12 (1206 ) 0.50~0.6 0.7~0.9 1.0~1.4 2.0~2.4 Dimension b 2.0 3.2 4.0 5.5 ( mm ) c 0.5 1.2 1.65 2.0 TA-I TECHNOLOGY CO., LTD General Purpose Chip Resistors ( Lead-Free for RMP 04/06/10/12 series Standard ) Document No. TRM-XX0S010G Issued Date 2011/04/26 page number 11/12 11. Recommend IR - Reflow profile : (solder : Sn96.5 / Ag3 / Cu0.5) Peak : 250 5 0 , 5 sec Pre - heat Zone : 150 to 180 , 9030 sec Soldering Zone : 230 or higher , 3010 sec 12. Storage Conditions: Temperature: 5~35,Humidity:40%~75% 13. Shelf Life: 2 years from manufacturing date. TA-I TECHNOLOGY CO., LTD General Purpose Chip Resistors ( Lead-Free for RMP 04/06/10/12 series Standard ) Revise record Date Apr.22.2008 Document No. TRM-XX0S010G Issued Date 2011/04/26 page number 12/12 Content Owner To establish specification . Vincent To upgrade: 1. TCR ( F , G , J class ) : 1 - 9.1 : From 200 ppm /change to 100 ppm / May.26.2008 2. Working voltage : 0603 : From 50V change to 150V 0805 : From 150V change to 200V 3. Maximum Working voltage : 0603 : From 100V change to 300V 0805 : From 300V change to 400V Vincent 4.Reliability : 4.1 Short Time Overload : R ( F class ) : From 2% change to1% . ( RMP04/06/10/12) 4.2 Moisture Resistance : Jun.5.2008 Oct.24.2008 Feb.24.2009 Sep.30.2009 R ( F class ) : From 2% change to1 % .( RMP04/06/10/12) 1.Type Designation: From RMJTP change to RMPJT. 2. 2% , 5% products : TCR : From200 ppm /change to 100 ppm / 3.Resistance range : 0603 / 0805/1206 : From 100K change to 360 K . 4.Reliability test : TA of Operational Life : From 70 change to 125 5. Changed of Land pattern Land pattern Dimension ( mm ) b c Type Size Before After Before After 0.7-0.9 1.0 0.3-0.4 0.4 RMP 02 1.4-1.6 2.0 0.4-0.6 0.5 RMP 04 2.0-2.2 3.2 0.8-1.0 1.2 RMP 06 3.2-3.8 4 0.9-1.4 1.65 RMP 10 4.4-5.0 5.5 1.2-1.8 2.0 RMP 12 To correction : 1.Test condition of Temperature Coefficient of Resistance : From -55 +125 change to +25 +125 2. Temperature Cycling : From 5 cycles change to 1000 cycles. Vincent Vincent Vincent To cancel 0201 type. To revise resistance range. 0402 ; from 1~100K change to 1~10K 0603: from 1~360K change to 1~47K 0805: from 1~360K change to 1~100K 1206: from 1~360K change to 1~100K Vincent TA-I TECHNOLOGY CO., LTD General Purpose Chip Resistors ( Lead-Free for RMP 04/06/10/12 series Standard ) Apr 26.2011 Document No. TRM-XX0S010G Issued Date 2011/04/26 page number 13/12 Reliability test : Reference standard from JIS-5202 change to JIS-C5201 Kate TA-I TECHNOLOGY CO., LTD