The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. CL 222 TM Plug for copper foil, stranded wire flat type cable MaterialFinish Electrical Performance Condition Specification Plug case Polycarbonate Clear Current rating Per pin 0.5A Terminal Phosphor Bronze Gold plated Voltage rating Per pin 125V AC Insulation Resistance 100V DC 100 M Min. Withstanding Voltage 1 minute 500V r.m.s AC Part name Material Finish Applicable Cable Conductor diameter Copper foil or AWG # 26 Insulator diameter 0.9-1.0 Item TM3P-44P CL No. 222-0207-2 Part No. TM3P-44P RoHS YES Insulator Applicable cable section (Packing unit: 100 Pcs.) CL No. 222-0278-0 222-0208-5 222-0209-8 TM3P-62P, 64P & 66P Part No. TM3P-62P TM3P-64P TM3P-66P RoHS YES Insulator Applicable cable section Note: Shown TM3P-64P. (Packing unit: 100 Pcs.) -31- The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. CL 222 TM TM8P-88P CL No. 222-1817-9 Part No. TM8P-88P RoHS YES Insulator Applicable cable section (Packing unit: 100 Pcs.) -32- The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. CL 222 TM Plug for copper foil, stranded wire circular type cable MaterialFinish Electrical Performance Condition Specification Plug case Polycarbonate Material Clear Current rating Per pin 0.5A Terminal Phosphor Bronze Gold plated Voltage rating Per pin 125V AC Insulation Resistance 100V DC 100 M Min. Withstanding Voltage 1 minute 500V r.m.s AC Part name Finish Applicable Cable Conductor diameter Copper foil or AWG # 26 Insulator diameter 0.9-1.0 Item TM4P-44P CL No. 222-0279-3 Part No. TM4P-44P RoHS YES Insulator Applicable cable section (Packing unit: 100 Pcs.) TM4P-64P & 66P CL No. 222-0280-2 222-0281-5 Part No. TM4P-64P TM4P-66P RoHS YES TM4P-64P TM4P-66P Insulator Applicable cable section Note: Shown TM4P-64P. (Packing unit: 100 Pcs.) -33- The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. CL 222 TM TM10P-88P CL No. 222-1818-1 Part No. TM10P-88P RoHS YES Insulator Applicable cable section (Packing unit: 100 Pcs.) -34- The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. CL 222 TM CL No. Part No. Applicable connector 902-0030-8-01 TC-2220-44 01 TM3P-44PTM4P-44P 902-0031-0-01 TC-2220-64 01 TM3P-64PTM4P-64P TM3P-62P 902-0032-3-01 TC-2220-66 01 TM3P-66PTM4P-66P 250-0228-1 TC-2220-8/10P-88-1 TM8P-88PTM10P-88P TM10P1-88P * This tool is made of metal and offers rigidity and durability. The handle is equipped with a ratchet mechanism that allows the press fit height of the plate contact to be set uniformly, and also permits the prevention of insufficient clamping. * The tool can be used for insulation stripping of flat cables and round cables. Note that model TC2220-66(01) is for use with flat cables only. Also note that model TC-2220-8/10P-88-1 is not equipped with an insulation stripping mechanism. * The cable is pulled out by the lever which permits consistent insulation stripping. Note: Please note that depending on the specifications of the cable, there may be instances in which the insulation cannot be stripped. When using the tool with products other than Hirose Electric modular plugs, the wiring quality cannot be guaranteed; therefore, please be sure to use Hirose Electric plugs. Item Part No. CL No. Applicable connector Press CM-105 901-0005-4 Applicator Applicator 105-TMP-44 901-0195-1 TM3P-44PTM4P-44P Applicator 105-TMP-64 901-0194-9 TM3P-64PTM4P-64P Applicator 105-TMP-66 901-0193-6 TM3P-66PTM4P-66P AP105-TM10P1-88P 901-2569-0 TM8P-88PTM10P-88P TM2P-62P -35- The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. CL 222 TM Plug for Solid Wire Cable MaterialFinish Electrical Performance Condition Specification Plug case Polycarbonate Material Clear Current rating Per pin 0.5A Terminal Phosphor Bronze Gold plated Voltage rating Per pin 30V AC Insulation Resistance 100V DC 100 M Min. Withstanding Voltage 1 minute 500V r.m.s AC Part name Finish Item Applicable Cable Conductor diameter 0.40.65 Insulator diameter 0.96 max. In case of use 0.65, not to be connected fully for 6 pins and 8 pins depend on size of insulator diameter. TM20P-66P CL No. 222-2275-3 Mating Condifiton Figure Part No. TM20P-66P RoHS YES (Packing unit: 100 Pcs.) Mating Condifiton Figure TM20P-88P CL No. 222-2217-7 Part No. TM20P-88P RoHS YES (Packing unit: 100 Pcs.) Exclusive Hand Tool for Connection CL No. 250-0240-7 250-0241-0 -36- Part No. TC2-TM20P-66P TC2-TM20P/30P-88P Applicable Connector TM20P-66P TM20P-88P The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. CL 222 TM Plug for Thin Wire Cable MaterialFinish Part name Plug case Terminal Electrical Performance Condition Specification Polycarbonate Material 6 Pins Clear blue Finish Current rating Per pin 0.5A 8 Pins Clear Voltage rating Per pin 125V AC Gold plated Insulation Resistance 100V DC 100 M Min. Withstanding Voltage 1 minute 500V r.m.s AC Phosphor Bronze Item UL94V-0 Applicable Cable Conductor diameter AWG # 287/0.127 Insulator diameter 0.787 max. TM30P-66P CL No. 222-2684-2 Part No. TM30P-66P RoHS YES Vinyl Sheath Drain wire Insulator TM30P-88P CL No. 222-2685-5 Part No. TM30P-88P RoHS YES Vinyl Sheath Drain wire Insulator Exclusive Hand Tool for Connection CL No. 250-0145-6 250-0241-0 -37- Part No. TC1-TM30P-66P TC2-TM20P/30P-88P Applicable Connector TM30P-66P TM30P-88P Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: TC-2220-8/10P-88-1 TM3P-44P TM3P-64P TM3P-66P TM3P-88P TM3P-62P TM4P-44P TM4P-64P TM4P-66P TM4P-88P TM4P-1212P TM4P-1212P(01) TM8P-88P TM10P-88P TM20P-88P TM20P-66P TM30P-66P TM30P-88P TM40PA-1212P TM10P1-88P TC-2220-64(01) TC-2220-66(01) TC-2220-44(01)