PART OBSOLETE MBR4030PT - MBR4060PT 40A SCHOTTKY BARRIER RECTIFIER * Schottky Barrier Chip TO-3P Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency High Surge Capability A B High Current Capability and Low Forward Voltage Drop H For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications Lead Free Finish, RoHS Compliant (Note 3) J S Mechanical Data K R Case: TO-3P * * Moisture Sensitivity: Level 1 per J-STD-020C * * * * Polarity: As Marked on Body Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 P Q G N Terminals: Finish - Bright Tin. Plated Leads Solderable per MIL-STD-202, Method 208 Ordering Information: See Last Page M Marking: Type Number O Weight: 5.6 grams (approximate) L LE T * * C Dim Min Max A 1.88 2.08 B 4.68 5.36 C 20.63 22.38 D 18.5 21.5 E 2.1 2.4 G 0.51 0.76 H 15.38 16.25 E * * * * * * Maximum Ratings and Electrical Characteristics D E M J 1.90 2.70 K 2.9AE 3.65AE L 3.78 4.50 M 5.2 5.7 N 0.89 1.53 P 1.82 2.46 Q 2.92 3.23 R 11.70 12.84 S 3/4 6.10 All Dimensions in mm @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol MBR 4030PT MBR 4035PT MBR 4040PT MBR 4045PT MBR 4050PT MBR 4060PT Unit VRRM VRWM VR 30 35 40 45 50 60 V VR(RMS) 21 24.5 28 31.5 35 42 V BS Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current IO 40 A O OBSOLETE - PART DISCONTINUED Features @ TC = 125C (Note 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 400 A Forward Voltage Drop @ IF = 20A, TC = 25C @ IF = 20A, TC = 125C VFM @ TC = 25C @ TC = 125C IRM 1.0 100 Peak Reverse Current at Rated DC Blocking Voltage 0.70 0.60 0.80 0.70 V mA Typical Total Capacitance (Note 2) CT 1100 pF Typical Thermal Resistance Junction to Case (Note 1) RqJC 1.4 C/W dV/dt 10,000 V/ms Tj, TSTG -65 to +150 C Voltage Rate of Change (Rated VR) Operating and Storage Temperature Range Notes: 1. Thermal resistance junction to case mounted on heatsink. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. MBR4030PT - MBR4060PT Document number: DS23019 Rev. 9 - 4 1 of 3 www.diodes.com July 2015 a Diodes Incorporated PART OBSOLETE 30 20 10 0 50 100 150 100 MBR 4030PT - MBR4045PT 10 MBR4050PT - MBR4060PT 1.0 0.1 0.9 0.8 0.3 0.4 0.6 0.7 0.5 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) 0.2 TC, CASE TEMPERATURE (C) Fig. 1 Forward Current Derating Curve 400 E IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) 40 0 4000 TJ = 25C f = 1 Mhz CT, CAPACITANCE (pF) LE T 8.3 ms Single half sine-wave (JEDEC method) 300 O 200 1000 100 1 100 BS IFSM, PEAK FORWARD SURGE CURRENT (A) 0.1 100 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Max Non-Repetitive Surge Current 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance 10 O OBSOLETE - PART DISCONTINUED 50 TC = 125C 1.0 0.1 TC = 75C TC = 25C 0.01 Tj = 25C 0.001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics MBR4030PT - MBR4060PT Document number: DS23019 Rev. 9 - 4 2 of 3 www.diodes.com July 2015 a Diodes Incorporated PART OBSOLETE Notes: (Note 4) Device Packaging Shipping MBR4030PT TO-3P 30/Tube MBR4035PT TO-3P 30/Tube MBR4040PT TO-3P 30/Tube MBR4045PT TO-3P 30/Tube MBR4050PT TO-3P 30/Tube MBR4060PT TO-3P 30/Tube 4. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. E IMPORTANT NOTICE LE T Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT BS O Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. O OBSOLETE - PART DISCONTINUED Ordering Information MBR4030PT - MBR4060PT Document number: DS23019 Rev. 9 - 4 3 of 3 www.diodes.com July 2015 a Diodes Incorporated