General Purpose High Voltage Supply 0 to + or - 1,000 through 0 to + or - 33,000 VDC @ 10 Watts 4000 Series FEATURES 0 to 100% Adjustability Voltage Programmable Voltage Monitor * Remote On/Off Control EMI/RFI Shielding Short Circuit Protection Reverse Polarity Protection Arc Protection * Excluding Models 4300 & 4330 OPTIONS Negative Output Voltage, put "N" after model (For example: 4300N) Output Connector APPLICATIONS Cathode Ray Tubes Lasers and Q Switches Capacitor Charging Test Instrumentation Electrostatic Field Generators Electrophoresis The 4000 Series is a line of fully adjustable DC to DC converters providing an economical source of high voltage that is ideal for CRT's, lasers, Q switches, PMT's, detectors, electron and ion guns, capacitor charging, test equipment, and many other applications. These units feature remote voltage programming, resistance programming, or manual adjustability via an externally PROGRAMMING VOLTAGE: Apply 0-10V to pin 5 for 0100% output. RESISTANCE: Connect potentiometer to pin 4 (reference voltage), connect wiper arm to pin 5, and connect potentiometer to ground. MANUAL: Connect pin 6 to pin 5, turn front panel pot for voltage adjust. PIN FUNCTION accessible potentiometer. Short circuit protection, arc protection, and reverse polarity protection are standard as well as remote on/off and a 0 to 10 volt output voltage monitor. These units also feature excellent EMI/RFI shielding. Two #6-32 studs mount the supply in a three inch mounting pattern. Call, e-mail or fax your requirements for immediate attention. MODEL OUTPUT VOLTAGE OUTPUT CURRENT 4010 0 to 1,000 10 mA .1% 4020 0 to 2,000 5 mA .1% 4030 0 to 3,000 3.3 mA .1% 4050 0 to 5,000 2 mA .1% 4070 0 to 7,000 1.4 mA .1% 4100 0 to 10,000 1 mA .1% 4120 0 to 12,000 .8 mA .1% 4150 0 to 15,000 .67 mA .1% RIPPLE 1 On-Off Control 2 Ground/Case 3 +24 Volt Input 4200 0 to 20,000 .5 mA .2% 4 10 Volt Reference 4300 0 to 30,000 .33 mA .2% 5 Programming Voltage 4330 0 to 33,000 .30mA .2% 6 Internal Potentiometer 7 Voltage Monitor Dimensional Tolerances: .30 (.76mm) (Metric equivalents in parentheses) PHYSICAL CHARACTERISTICS MODELS 4010 thru 4200 * SIZE: 4.1"(104) x 3.1"(78) x 1.4"(36) MODELS 4300 thru 4330 * SIZE: 4.1"(104) x 3.6"(91) x 1.4"(36) WEIGHT: 1.5 Pound (.675 kg.) Approx. CASE MATERIAL: Black Anodized Aluminum INPUT CONNECTOR: Molex 09-75-2074 MATING CONNECTOR: Molex 09-50-3071 (Supplied) MOLEX PINS: 08-50-0106 MODELS 4010 thru 4200 * HV LEAD: 30KV 22 AWG MODELS 4300 thru 4330 * HV LEAD: 40KV 20 AWG ELECTRICAL SPECIFICATIONS INPUT VOLTAGE: +24 Volts (+20%- 5%) OUTPUT VOLTAGE: See Table OUTPUT CURRENT: See Table REGULATION: Less then 0.2% (No load to full load) ANALOG CONTROL: 0 to 10 Volts=0 to 100% Output VOLTAGE MONITOR: 0 to 10 Volts=0 to 100% Output ON/OFF CONTROL: On=0 Volts or N.C. Off=5 Volts REFERENCE OUTPUT: 10 Volts ( 0.5%) OPERATING TEMP: -10 to +60 C e-mail sales@emcohighvoltage.com Web site www.emcohighvoltage.com Phone (209) 223-3626 Fax (209) 223-2779 11126 Ridge Road, Sutter Creek CA 95685 We reserve the right to make changes without notification 4705K