PFC250 AC-DC Series Data Sheet Features * RoHS lead-solder-exempt compliant * Greater than 1 million hours demonstrated MTBF * Active Power Factor Correction (PFC) meets EN61000-3-2 * Dual main outputs provide 3.3V and 5V for mixed-mode applications * Single-wire current sense on outputs V1 and V2 * Remote sense on outputs V1 and V2 * Overtemperature, overload, and overvoltage protection * Available with metric or SAE mountings * Isolated V3 and V4 can be used as positive or negative outputs Description The PerFormanCe Power PFC250 Series combines Power Factor Correction (PFC) with wide-range outputs to meet the requirements of data communications and industrial controls. The PFC250-4530 and PFC250-4350 provide high current +3.3V and +5V on a single platform to support mixed-mode, high-speed digital circuitry. Power-One's unique dual-converter architecture combines high reliability with exceptional regulation. All models feature remote sense on outputs V1 and V2 to provide independent compensation of output cable losses. Other standard features include independent current sharing on V1 and V2, thermal shutdown, and remote inhibit. Airflow of 300 linear feet per minute (LFM) is required to deliver the full power density of 3.0 watts per cubic inch. The PerFormanCe Power PFC250 meets international safety requirements and is CE Marked to the Low Voltage Directive. Single-Output Model Selection MODEL PFC250-1003 PFC250-1005 PFC250-1012 PFC250-1015 PFC250-1024 PFC250-1048 NOTES: OUTPUT VOLTAGE ADJUSTMENT RANGE MAXIMUM OUTPUT CURRENT (NOTE 1) LINE REGULATION LOAD REGULATION RIPPLE & NOISE %p-p (NOTE 2) INITIAL SETTING ACCURACY 3.3V 5V 12V 15V 24V 48V 3.15V to 3.45V 4.5V to 5.5V 10.8V to 13.5V 13.5V to 18.3V 21.6V to 26.4V 46.0V to 56.0V 50A 50A 23A 18.3A 10.5A 6A 0.5% 0.5% 0.5% 0.2% 0.5% 0.5% 0.8% 0.8% 0.8% 1.0% 0.8% 1.0% 1% 1% 1% 1% 1% 1% 3.28V to 3.32V 4.98V to 5.02V 11.94V to 12.06V 14.92V to 15.08V 23.88V to 24.12V 47.52V to 48.48V 1) Output currents ratings are expressed with 300 LFM forced air. 2) Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. MAY 26, 2006 revised to AUG 16, 2006 Page 1 of 5 www.power-one.com PFC250 AC-DC Series Data Sheet Multiple-Output Model Selection - MODEL PFC250-4000 (Note 2) PFC250-4001 (Note 2, 4) PFC250-4004 (Note 3, 4) PFC250-4350 (Note 2, 4) PFC250-4530 (Note 2, 4) NOTES: 1) 2) 3) 4) 250W with 300 LFM Forced-Air Cooling Isolated V3 and V4 can be used as Positive or Negative Outputs OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT CURRENT LINE REGULATION LOAD REGULATION RIPPLE & NOISE %p-p (NOTE 1) INITIAL SETTING ACCURACY +5V +12V 12V 5V +5V +12V 12V 12V +5V +12V 15V 15V +3.3V +5V 12V 12V +5V +3.3V 12V 12V 5.0V to 5.5V 10.8V to 13.2V 10.8V to 13.2V 5.0V to 5.5V 5.0V to 5.5V 10.8V to 13.2V 10.8V to 13.2V 10.8V to 13.2V 5.0V to 5.5V 10.8V to 13.2V 13.5V to 16.5V 13.5V to 16.5V 3.15V to 3.45V 5.0V to 5.5V 10.8V to 13.2V 10.8V to 13.2V 5.0V to 5.5V 3.15V to 3.45V 10.8V to 13.2V 10.8V to 13.2V 40A 10A 6A 3A 40A 10A 6A 3A 40A 10A 6A 3A 40A 20A 6A 3A 40A 20A 6A 3A 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 1% 1% 7% 2% 1% 1% 7% 7% 1% 1% 7% 7% 1.5% 1% 7% 7% 1% 1.5% 7% 7% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 4.98V to 5.02V 11.94V to 12.06V 11.94V to 12.06V 4.98V to 5.02V 4.98V to 5.02V 11.94V to 12.06V 11.75V to 12.06V 11.75V to 12.06V 4.98V to 5.02V 11.94V to 12.06V 14.70V to 15.30V 14.70V to 15.30V 3.28V to 3.32V 5.00V to 5.04V 11.75V to 12.06V 11.75V to 12.06V 4.98V to 5.02V 3.28V to 3.32V 11.75V to 12.06V 11.75V to 12.06V Maximum peak-to-peak expressed as a percentage of output voltage, 20 MHz bandwidth. Total current available from V1 + V2 is 40 amperes, total current available from V3 + V4 is 6.6 amperes. Total current available from V1 + V2 is 40 amperes, total current available from V3 + V4 is 6.0 amperes. One adjustment pot is provided for both V3 and V4 outputs. One-to-one tracking is provided on V3 and V4 when equally loaded. Model numbers highlighted in yellow or shaded are not recommended for new designs. MAY 26, 2006 revised to AUG 16, 2006 Page 2 of 5 www.power-one.com PFC250 AC-DC Series Data Sheet Input Specifications PARAMETER CONDITIONS/DESCRIPTION MIN Input Voltage - AC Input Frequency Brown Out Protection Hold-up Time Input Current Input Protection Inrush Surge Current Power Factor Operating Frequency Continuous input range. AC Input. Lowest AC input voltage that regulation is maintained with full rated loads. After last AC line peak at 250 watts. 85 VAC at full rated load. Non-user serviceable internally located AC input line fuse. Internally limited by thermistor. Vin = 230 VAC, one cycle, 25C. Per EN61000-3-2. Switching frequency of main output transformer. Switching frequency of secondary transformer. Switching frequency of Power Factor Correction circuit. 85 47 80 20 NOM MAX UNITS 264 63 VAC Hz VAC ms ARMS 4.5 35 0.95 129 70 60 APK W/VA kHz Output Specifications PARAMETER CONDITIONS/DESCRIPTION MIN Efficiency Minimum Load, V1 Full rated load, 110 VAC. Varies with distribution of loads among outputs. Minimum load required to maintain regulation on V2 Single output models All other models Minimum load required to maintain regulation on V4 Single output models PFC250-4000 All other models Full load, 20 MHz bandwidth. 300 LFM forced-air cooling. Output voltage overshoot/undershoot at turn-on. Varies by output. Total regulation includes: line changes over the specified input range, changes in load starting at 20% load and changing to 100% load. Recovery time to within 1% of initial set point due to a 25% step load from any load setting from minimum to maximum load. Time required for initial output voltage stabilization. Time required for output voltage to rise from 10% to 90%. 65 75 0 4 N/A 1.25 0.6 See Model Selections 250 0 Minimum Load, V3 Ripple and Noise Output Power Overshoot /Undershoot Regulation Transient Response Turn-on Delay Turn-on Rise Time NOM MAX UNITS % Amps Amps Watts % See Model Selections 500 s 2 20 Sec ms Interface Signals and Internal Protection PARAMETER CONDITIONS/DESCRIPTION Overvoltage Protection Latch style overvoltage protection. Available on all single output models and V1, V2, and V3 on all multiple-output models. Overload Protection Overtemperature Protection Output Good Input Power Fail Warning Current Share Remote Sense Inhibit Standby Power MIN NOM MAX 3.3V output, V1 4.1 4.65 3.3V output, V2 4.2 4.2 5V output, V1, V2 6.0 6.4 12V output, V1, V2 14.0 16.0 15V output, V1 18.3 19.8 24V output, V1 27.0 30.7 48V output, V1 60.0 70.0 Fully protected against output overload and short circuit. Automatic recovery upon removal of overload condition. System shutdown due to excessive internal temperature, automatic reset. TTL compatible signal. Signal is high when V1 output is 3.3V 3.16 within 5% of nominal. Signal shall remain low for 20 5V 4.75 milliseconds following loss of Output Good. TTL compatible logic signal. Time before regulation dropout due to loss of input 5 power. May be used as independent PSOK signal in redundant applications. Accuracy of shared current with up to 6 parallel units. Single-wire current share 10 on V1 and V2 with return via vegative (-) Sense return. Minimum current share load is 6A or 50W, whichever is smaller. Available on V1 and V2. Total voltage compensation for cable losses with 250 respect to the main output. Output voltage is inhibited by application of external high (5V) signal. Available with fan option versions only (+5VDC). 100 MAY 26, 2006 revised to AUG 16, 2006 Page 3 of 5 UNITS V V ms % mV mA www.power-one.com PFC250 AC-DC Series Data Sheet Safety, Regulatory, and EMI Specifications PARAMETER CONDITIONS/DESCRIPTION Agency Approvals ESD Susceptibility Radiated Susceptibility EFT/Burst Input Transient Protection UL1950. CSA 22.2 NO. 234/950. EN60950 (TUV). Input to Output per EN60950. FCC CFR title 47 Part 15 Sub-Part B - Conducted. EN55022 / CISPR 22 Conducted. Per EN61000-4-2, level 4. Per EN61000-4-3, level 3. Per EN61000-4-4, level 4. Per EN61000-4-5 level 3. Insulation Resistance Leakage Current Input-to-Output. Per EN60950, 264 VAC. Dielectric Withstand Voltage Electromagnetic Interference MIN NOM MAX UNITS Approved Line-to-Line Line-to-Ground 2600 B B 8 10 4 1 2 VDC Class kV V/M kV kV 10 1500 M A Environmental Specifications PARAMETER CONDITIONS/DESCRIPTION Altitude Operating. Non-Operating. MIN Operating Temperature Derate linearly above 50C by 2.5% per C. Storage Temperature Temperature Coefficient Relative Humidity Shock Vibration At 100% load: At 50% load: NOM 0 -55 0C to 70C (after 15 minute warmup). Non-Condensing. Peak acceleration. Random vibration, 10 Hz to 2 kHz, 3 axes. 0.02 5 MAX UNITS 10k 40k 50 70 85 0.05 95 20 6 ASL Ft. ASL Ft. C C C %/C %RH GPK GRMS Options DESCRIPTION NOTES Metric Mounting Add "M" as a suffix to the model number to order chassis with M4 x 0.7 mounting inserts. Add "F" as a suffix to the model number to order integral fan. Adds 1.5" (38.1mm) to overall length and 0.5" (12.7mm) to height. Fan SIZE IMPACT 8.50" x 4.75" x 2.00" (215.9mm x 120.7mm x 50.8mm) 10.00" x 4.75" x 2.50" (250.4mm x 120.7mm x 63.5mm) NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president of Power-One, Inc. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. MAY 26, 2006 revised to AUG 16, 2006 Page 4 of 5 www.power-one.com PFC250 AC-DC Series Data Sheet Overall Size: 8.50" x 4.75" x 2.00" (215.9mm x 120.7mm x 50.8mm) Overall Length With Fan: 10.00" (250.4mm) Weight: 2.75 lb (1.25 kg) * 08 CONNECTOR J1 J3 J6 * MOLEX SERIES 41695 41695 2139 41695 41695 2139 5264-N 09-50-8051 09-50-8051 09-50-3051 09-50-8061 09-50-8061 09-50-3061 PIN SERIES 6838 2478 2478 6838 2478 2478 PINS (LOOSE) 08-50-0189 08-50-0106 08-50-0106 08-50-0189 08-50-0106 08-50-0106 PINS (CHAIN) 08-50-0187 08-50-0105 08-50-0105 08-50-0187 08-50-0105 08-50-0105 WIRE GAUGE 18-20AWG 18-20AWG 18-20AWG 18-20AWG 18-20AWG 18-20AWG 50-37-5113 5263 08-70-1040 08-70-1039 22-28AWG HOUSING MAY 26, 2006 revised to AUG 16, 2006 Page 5 of 5 Chassis: 0.063" (1.6mm) Aluminum Alloy, With Clear Finish * NOTE: THE +5V @ 100mA STANDBY POWER OUTPUT (J6-11) IS AVAILABLE ONLY ON UNITS WITH THE FAN OPTION. www.power-one.com