MAP 80...130 Series 80...130 Watt AC-DC Converters Input voltage range 90...264 V AC 1 or 4 outputs 5...24 VDC 2600 V DC I/O electric strength test voltage A CE EN 55002 conducted and radiated limits Overtemperature and overload protection EMC compliance to EN61000-4-2/3/4 Selection chart Output 1 Output 2 Output 3 Output 4 input Rated Type Usnom fonom | Uonom fonom i Yonom fonom | Uonom onom voltage power [VDC] [A] |{[VDC] [A] | {[v0C] [A] | [VDC] [A] U [VAC] Po tat [W] 5 16 - - - - - - 90...264 80 MAP 80-1005 5 26 - - - - - - 90...264 130 MAP 130-1005 12 7.5 - - - - - - 90...264 90 MAP 80-1012 12 12 - - - - - - 90...264 144 MAP 130-1012 15 6 - - - - - - 90...264 90 MAP 80-1012 15 10 - - - - - - 90...264 150 MAP 130-1012 24 3.8 - - - - - - 90...264 90 MAP 80-1024 24 6.2 - - - - - - 90...264 150 MAP 130-1024 +5 14 +12 4 -5 1 -12 1 90...264 80 MAP 80-4000 +5 14 +12 4 -5 1 +12 3 90...264 80 MAP 80-4010 +5 14 +12 4 -12 1 -5 3 90...264 80 MAP 80-4020 +5 14 +12 4 -12 1 +12 1 90...264 80 MAP 80-4002 +5 14 +15 3.5 - 1 -15 1 90...264 80 MAP 80-4003 +5 14 +24 2 -12 1 +12 1 90...264 80 MAP 80-4001 +5 14 +24 2 -15 1 +15 1 90...264 80 MAP 80-4004 +5 20 +12 5 -5 1 ~-12 1 90...264 130 MAP 130-4000 +5 20 +12 5 -5 4 -12 3 90...264 130 MAP 130-4010 +5 20 +12 5 -12 1 -5 3 90...264 130 MAP 130-4020 +5 20 +12 5 12 1 +12 1 90...264 130 MAP 130-4002 +5 20 +15 4 -5 1 -15 1 90...264 130 MAP 130-4003 +5 20 +24 3.5 -12 1 +12 1 90...264 130 MAP 130-4001 +5 20 +24 3.5 -15 1 +15 1 90...264 130 MAP 130-4004 21 8 OP guer- One www.power-one.chOpen Frame MAP 80...130 Series Input Input voltage auto-ranging, continuous ranges 90...135 VAC 175...264 VAC Input frequency 47...63 Hz inrush current limited by thermistor, U; = 264 VAC, 1 cycle, 25C <38A Output Efficiency 115 VAC, Ionom typ. 75% Output voltage ripple and noise Ui nom: !o nom, 20 MHz bandwidth, peak-peak <1% Voltage regulation line and load combined typ. <1% Minimum load on MAP 80 max. 1A on MAP130 max. 3A Hold-up time 115 VAC, Ionom >20 ms Protection Inout Fuse non-user serviceable internal AC input line fuse Output overload overload and short circuit, automatic recovery Output overvoltage latch style Overtempeature on MAP130 only Control Input power fail warning TTL compatible signal, warning time 4ms Remote sense MAP 130 only, voltage compensation 250 mV Safety Agency approvals UL 1950; CSA 22.2 No. 234/950; EN 60950 (TUV); CE to LVD Electric strength test voltage I/O per EN 60950 2600 V DC EMC Electrostatic discharge MAP 130 IEC/EN 61000-4-2, level 4 8 kV, criterion A Radiated susceptibility MAP130 IEC/EN 61000-4-3, level 3 10 V/m, criterion A Electr. fast transients/burst MAP 130 IEC/EN 61000-4-4, level 3 +2 kV, criterion A Input surge IEC/EN 61000-4-5, level 3 2 KV, criterion A Electromagnetic emissions CISPR 22/EN 55022, conducted and radiated class B Environmental Operating temperature convection cooled 0...50C linear derating above 50C, 2.5 %/C 50...70C Storage temperature non-operational 40...85C Relative humidity non-condensing 5...95% Shock peak acceleration 20 gn Vibration, random 10 Hz to 2 kHz, 3 axes 6 Gnims Options Cover MAP 80 derate to 65 W, MAP 130 to 120 W Cc www.power-one.ch @ Power-one 219MAP 80...130 Series 80...130 Watt AC-DC Converters Tolerances +0.3 mm (0.012") unless otherwise indicated. Mechanical data [AP go MAP 80 f $90016 { = = > 6) 6.32 UNC-2B thread Qi M4x 0.7 QD 43 (0.1792 406.7 (4.2") 82 (3.23") | yf. v.abs [2] com s yo] l Cl vi wt V. ADJ. PF 182.9 (7.20") 170.2 (6.70") AC input: Mates with 5 circuit Molex connector. DC output: Mates with 14 circuit Molex connector. J1: 0.9 mm (0.035") square pins on 2.5 mm (0.1") centers, mates with Molex series 2695 and 6471. 2 20 P ouer- one . www.power-one.chOpen Frame MAP 80...130 Series MAP 130 $90017 =__ = \ a 6.32 UNC-2B thread ( 1 ( () (] ( 1 ( oe M4 x 0.7 gi 2 4.3 (0.178 Sy Sp Sy |e ee ee eee TT 1 ~ aa GND 7-7 N ite |) ~~ 3 SME 2) 2 of =| Rls 8 | & a 203.2 (8") . in 215.9 (8.5") Terminal allocation J2 AC input: Mates with 5 circuit Molex connector. Pin MAP 130 DC output: Mates with 16 circuit Molex connector. ! J2: 0.89 mm (0.035") squeare pins on 2.54 mm 1 n.c. (0.1") centers, mates with Molex series 2695 and 2 +Sense, V1 6471. | 3 Sense, V1 4 Power fail warning @ Power-one 221 www.power-one.ch