CB AUTOMOTIVE RELAY WITH ISO TERMINAL ARRANGEMENT CB RELAYS FEATURES * This relay has an ISO (International Organization for Standardization) terminal arrangement. Terminals are all solder plated. *35 A type: Terminal is the plug-in type (no plating). * Relay is compact and high capacity (40 A). Compact form factor realized with space saving 22 x 26 mm .866 x 1.024 inch small base area thanks to integrated bobbin and base construction. Features high switching capacity of 40 A * Features high thermal resistance of 125C 257F (heat resistant type). Heat resistant type is available that can withstand use near engines. (40 A switching capacity) * Sealed type available for resisting adverse environments. RoHS compliant * Protective element type is also available. * For only plug-in types, types with nominal switching capacities of 35 A (12 V) and 15 A (24 V) are available. TYPICAL APPLICATIONS * Automobiles Headlights, Cell motors, Air conditioners, ABS, EPS, etc. * Construction equipment * Agricultural equipment, Conveyor, etc. ORDERING INFORMATION CB Contact arrangement 1a: 1 Form A 1: 1 Form C Contact rating Nil: Standard type H: High contact capacity type V: 35 A type Protective construction Nil: Sealed type F: Flux-resistant type Heat resistant of types Nil: Standard type T: Heat resistant type Protective element Nil: None R: with resistor inside Mounting classification Nil: Plug-in type P: PC board type M: Bracket type Coil voltage (DC) 12V, 24 V Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB220E 201203-T1 CB TYPES 1. Standard type Contact arrangement Mounting classification PC board type 1 Form A Plug-in type Bracket type PC board type 1 Form C Plug-in type Bracket type PC board type* High contact capacity (1 Form A) Plug-in type Bracket type 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC Sealed type Part No. CB1a-P-12V CB1a-P-24V CB1a-12V CB1a-24V CB1a-M-12V CB1a-M-24V CB1-P-12V CB1-P-24V CB1-12V CB1-24V CB1-M-12V CB1-M-24V Flux-resistant type Part No. CB1aF-P-12V CB1aF-P-24V CB1aF-12V CB1aF-24V CB1aF-M-12V CB1aF-M-24V CB1F-P-12V CB1F-P-24V CB1F-12V CB1F-24V CB1F-M-12V CB1F-M-24V 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC CB1aH-P-12V CB1aH-P-24V CB1aH-12V CB1aH-24V CB1aH-M-12V CB1aH-M-24V CB1aHF-P-12V CB1aHF-P-24V CB1aHF-12V CB1aHF-24V CB1aHF-M-12V CB1aHF-M-24V Nominal coil voltage Standard packing; Carton: 50 pcs. Case: 200 pcs. Notes: 1. Please use "CBR" to order built-in resistor type. (Asterisks "" should be filled in from ORDERING INFORMATION.) 2. *Regarding solder, this product is not MIL (Military Standard) compliant. Please evaluate solder mounting by the actual equipment before using. 2. Heat resistant type Contact arrangement Mounting classification PC board type 1 Form A Plug-in type Bracket type PC board type 1 Form C Plug-in type Bracket type PC board type* High contact capacity (1 Form A) Plug-in type Bracket type 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC Sealed type Part No. CB1a-T-P-12V CB1a-T-P-24V CB1a-T-12V CB1a-T-24V CB1a-T-M-12V CB1a-T-M-24V CB1-T-P-12V CB1-T-P-24V CB1-T-12V CB1-T-24V CB1-T-M-12V CB1-T-M-24V Flux-resistant type Part No. CB1aF-T-P-12V CB1aF-T-P-24V CB1aF-T-12V CB1aF-T-24V CB1aF-T-M-12V CB1aF-T-M-24V CB1F-T-P-12V CB1F-T-P-24V CB1F-T-12V CB1F-T-24V CB1F-T-M-12V CB1F-T-M-24V 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC CB1aH-T-P-12V CB1aH-T-P-24V CB1aH-T-12V CB1aH-T-24V CB1aH-T-M-12V CB1aH-T-M-24V CB1aHF-T-P-12V CB1aHF-T-P-24V CB1aHF-T-12V CB1aHF-T-24V CB1aHF-T-M-12V CB1aHF-T-M-24V Nominal coil voltage Standard packing; Carton: 50 pcs. Case: 200 pcs. Notes: 1. Please use "CBR" to order built-in resistor type. (Asterisks "" should be filled in from ORDERING INFORMATION.) 2. *Regarding solder, this product is not MIL (Military Standard) compliant. Please evaluate solder mounting by the actual equipment before using. New 3. 35 A type (*Terminals are all of the plug-in type.) Contact arrangement 1 Form A 1 Form C 1 Form A with resistor inside 1 Form C with resistor inside Nominal coil voltage 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC Sealed type Part No. CB1aV-12V CB1aV-24V CB1V-12V CB1V-24V CB1aV-R-12V CB1aV-R-24V CB1V-R-12V CB1V-R-24V Flux-resistant type Part No. CB1aVF-12V CB1aVF-24V CB1VF-12V CB1VF-24V CB1aVF-R-12V CB1aVF-R-24V CB1VF-R-12V CB1VF-R-24V Standard packing; Carton: 50 pcs. Case: 200 pcs. ASCTB220E 201203-T1 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ CB RATING 1. Coil data 1) No protective element Contact arrangement Nominal coil voltage Pick-up voltage Drop-out voltage 1 Form A, 1 Form C 12V DC 24V DC 3 to 7V DC 6 to 14V DC 1.2 to 4.2V DC 2.4 to 8.4V DC High contact capacity (1 Form A) 12V DC 3 to 7V DC 1.2 to 4.2V DC 24V DC 6 to 14V DC 2.4 to 8.4V DC Nominal operating current Coil resistance Nominal operating power Usable voltage range 117mA 75mA 117mA 150mA 58mA 75mA 103 320 103 80 411 320 1.4W 1.8W 1.4W (PC board type) 1.8W 1.4W (PC board type) 1.8W 10 to 16V DC 20 to 32V DC 10 to 16V DC 20 to 32V DC Note: Other pick-up voltage types are also available. Please contact us for details. 2) With resistor inside Contact arrangement Nominal coil voltage Pick-up voltage (Initial, at 20C 68F) Drop-out voltage (Initial, at 20C 68F) Nominal operating current (at 20C 68F) Combined resistance (10%) (at 20C 68F) Nominal operating power (at 20C 68F) Usable voltage range 1 Form A, 1 Form C 12V DC 24V DC 3 to 7V DC 6 to 14V DC 1.2 to 4.2V DC 2.4 to 8.4V DC 134mA 84mA 89.5 287.2 1.6W 2.0W 10 to 16V DC 20 to 32V DC 2. Specifications 1) Standard type (12 V coil voltage) Characteristics Item Specification Arrangement Contact 1 Form A Contact resistance (Initial) Contact material Typ2m (By voltage drop 6 V DC 1 A) Ag alloy (Cadmium free) Nominal switching capacity (Initial) Rating Electrical characteristics Mechanical characteristics Expected life Conditions High contact capacity (1 Form A) 1 Form C Max. carrying current (Initial) (14V DC, at 85C 185F, continuous) Nominal operating power Min. switching capacity (resistive load)*1 Insulation resistance (Initial) Between open contacts Breakdown voltage (Initial) Between contacts and coil Operate time (at nominal coil voltage) (at 20C 68F) Release time (at nominal coil voltage) (at 20C 68F) 40A 14V DC N.O.: 40A 14V DC N.C.: 30A 14V DC 70A 14V DC (at 20C 68F) 50A 14V DC (at 85C 185F) N.O.: 40A N.O.: 40A, N.C.: 30A N.O.: 40A 1.4W Max. 15ms (excluding contact bounce time) (Initial) Max. 15ms (excluding contact bounce time) (Initial) Min. 200 m/s2 {20G} Min. 1,000 m/s2 {100G} Functional Shock resistance Destructive Functional Destructive Electrical (at nominal switching capacity) Mechanical Vibration resistance Conditions for operation, transport and storage*2 Max. operating speed Mass 1.4W 1.8W (1.4W: PC board type) 1A 12V DC (12V DC), 1A 24V DC (24V DC) Min. 20 M (at 500 V DC) 500 Vrms for 1 min. (Detection current: 10mA) 500 Vrms for 1 min. (Detection current: 10mA) 10 Hz to 500 Hz, Min. 44.1m/s2 {4.5G} 10 Hz to 2,000 Hz, Min. 44.1m/s2 {4.5G} Time of vibration for each direction; X. Y. Z direction: 4 hours Flux-resistant type: Min. 105, Sealed type: Min. 5x104 (Operating frequency: 2s ON, 2s OFF) Min. 106 (at 120 cpm) Standard type; Ambient temperature: -40 to +85C -40 to +185F, Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Heat resistant type; Ambient temperature: -40 to +125C -40 to +257F, Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 15 cpm (at nominal switching capacity) Approx. 33 g 1.16 oz Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Please refer to "Usage ambient condition" in CAUTIONS FOR USE OF AUTOMOTIVE RELAYS. 2) Standard type (24 V coil voltage) Characteristics Item Specifications Arrangement Contact 1 Form A Contact resistance (Initial) Contact material Nominal switching capacity (Initial) Rating Max. carrying current (Initial) (28V DC, at 85C 185F, continuous) Nominal operating power 20A 28V DC 1 Form C Max. 15m (By voltage drop 6 V DC 1 A) Ag alloy (Cadmium free) N.O.: 20A 28V DC N.C.: 10A 28V DC High contact capacity (1 Form A) 20A 28V DC 20A N.O.: 20A, N.C.: 10A 20A 1.8W 1.8W 1.8W, 1.4W (PC board type) Note: All other specifications are the same as those of standard type (12 V coil voltage) Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB220E 201203-T1 CB 3) Heat resistant type (12 V and 24 V coil voltage) Characteristics Specifications Item 12V Arrangement 24V High contact capacity 1 Form A (1 Form A) Max. 15m (By voltage drop 6 V DC 1 A) Ag alloy (Cadmium free) 1 Form A 1 Form C 40A 14V DC N.O.: 40A 14V DC N.C.: 30A 14V DC 50A 14V DC N.O.: 50A 14V DC 45A 50A N.C.: 30A 14V DC 14V DC 14V DC Contact Contact resistance (Initial) Contact material Nominal switching capacity (Initial) Rating Max. carrying current (Initial) (at 85C 185F, continuous)* Nominal operating power 1.4W 1.4W 40A 14V DC 1.8W 1.4W (PC board type) 1 Form C High contact capacity (1 Form A) 20A 28V DC N.O.: 20A 28V DC N.C.: 10A 28V DC 20A 28V DC 25A 28V DC N.O.: 25A 28V DC N.C.: 10A 28V DC 25A 28V DC 1.8W 1.8W 1.8W, 1.4W (PC board type) Notes: 1. All other specifications are the same as those of standard type (12 V coil voltage) 2. *Current value in which carry current is possible when the coil temperature is 180C 356F 4) 35 A type (12 V coil voltage) Characteristics Contact Rating Item Arrangement Contact resistance (Initial) Contact material Nominal switching capacity (Resistive load) Max. carrying current (Initial) (14V DC, at 85C 185F, continuous) Nominal operating power Min. switching capacity (Reference value)* Specifications 1 Form A 1 Form C Typ2m (By voltage drop 6 V DC 1 A) Ag alloy (Cadmium free) 35A 14V DC N.O.: 35A 14V DC, N.C.: 25A 14V DC N.O.: 35A 1.4W, 1.6W (with resistor inside) 1A 12V DC (12V DC), 1A 24V DC (24V DC) Insulation resistance (Initial) Electrical characteristics Mechanical characteristics Expected life Conditions Breakdown voltage (Initial) Min. 20 M (at 500 V DC) Between open contacts Between contacts and coil Operate time (at nominal coil voltage) Release time (at nominal coil voltage) Functional Shock resistance Destructive Functional Vibration resistance Destructive Electrical (at nominal switching capacity) Mechanical Conditions for operation, transport and storage Max. operating speed Mass N.O.: 35A, N.C.: 25A 500 Vrms for 1 min. (Detection current: 10mA) 500 Vrms for 1 min. (Detection current: 10mA) Max. 15ms (excluding contact bounce time) (Initial) Max. 15ms (excluding contact bounce time) (Initial) Min. 100 m/s2 {approx. 10G} (Half-wave pulse of sine wave: 11ms; detection time: 10s) Min. 1,000 m/s2 {approx. 100G} (Half-wave pulse of sine wave: 6ms) 10 Hz to 100 Hz, Min. 44.1m/s2 {approx. 4.5G} (Detection time: 10s) 10 Hz to 2,000 Hz, Min. 44.1m/s2 {approx. 4.5G} Time of vibration for each direction; X. Y. Z direction: 4 hours Flux-resistant type: Min. 105, Sealed type: Min. 5x104 (Operating frequency: 2s ON, 2s OFF) Min. 106 (at 120 cpm) Ambient temperature: -40C to +85C -40F to +185F Humidity: 5% R.H. to 85% R.H. (Not freezing and condensing at low temperature) 15 cpm (at nominal switching capacity) Approx. 26 g .92 oz Note: * This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. 5) 35 A type (24 V coil voltage) Characteristics Item Contact Arrangement Nominal switching capacity (Resistive load) Max. carrying current Rating (14V DC, at 85C 185F, continuous) Nominal operating power Specifications 1 Form A 15A 28V DC 1 Form C N.O.: 15A 28V DC, N.C.: 8A 28V DC N.O.: 15A N.O.: 15A, N.C.: 8A 1.8W, 2.0W (with resistor inside) Note: All other specifications are the same as those of 35 A type (12 V coil voltage). ASCTB220E 201203-T1 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ CB REFERENCE DATA CB RELAYS (Standard type) 2. Max. switching capability (Resistive load) (Heat resistant standard type) (Standard type) 20A 100 30A 80 40A 60 3. Ambient temperature and operating voltage range (Standard type) 40 Coil applied voltage, VDC 120 50 40 30 20 105 cycle line 100 110 120 130 140 Applied coil voltage, %V 0 150 10 30 25 20 15 5 Actual value (Max. 105 cycle) 0 35 10 10 40 20 90 (N.O. side Room temperature) 60 150 140 Switching voltage, VDC Maximum allowable ambient temperature, C 1. Allowable ambient temperature 20 30 40 Switching current, A 0 -40 -20 50 Pick-up voltage (Cold start) 0 20 40 60 8085 100 120 Ambient temperature, C Assumption: * Maximum mean coil temperature: 180C * Curves are based on 1.4W (Nominal power consumption of the unsupprressed coil at nominal voltage) 4. Distribution of pick-up and drop-out voltage 5. Distribution of operate and release time Sample: CB1-P-12V, 42pcs. Sample: CB1-P-12V, 42pcs. 60 60 Pick-up voltage Drop-out voltage 40 30 40 30 20 20 10 10 0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Voltage, V 6-(1). Electrical life test (Motor free) Operate and release time, ms Change of pick-up and drop-out voltage Sample: CB1F-12V, 5pcs. Load: 25A 14V DC, motor free actual load Operating frequency: ON 1s, OFF 9s Ambient temperature: Room temperature Change of contact resistance Relay harness M Motor 50 5 Pick-up voltage Max. X Min. 4 3 Drop-out voltage 2 Max. X Min. 0 40 3 20 10 1 Observation of load waveform with current probe and digital oscilloscope Contact resistance, m Tested sample Pick-up and drop-out voltage, V 6 Circuit 14V DC Operate time Release time 50 Quantity, n Quantity, n 50 0 5 10 0 0 No. of operations, x 104 5 Max. X Min. 10 No. of operations, x 104 Load current waveform Inrush current: 80A, Steady current: 25A 20A 200ms Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB220E 201203-T1 CB Change of pick-up and drop-out voltage Circuit Relay Halogen lamp 12V 45/65W Change of contact resistance 6 50 5 Pick-up voltage Max. X Min. 4 3 Drop-out voltage 2 Max. X Min. 1 14V DC 0 Observation of load waveform with current probe and digital oscilloscope Contact resistance, m Sample: CB1F-12V, 5pcs. Load: 45/65Wx5 parallel, 14V DC, halogen lamp actual load Operating frequency: ON 1s, OFF 8s Ambient temperature: Room temperature Pick-up and drop-out voltage, V 6-(2). Electrical life test (Lamp load) 0 10 40 30 20 10 0 20 0 No. of operations, x 104 Max. X Min. 20 10 No. of operations, x 104 Load current waveform Inrush current: 100A, Steady current: 20A 20A 200ms CB RELAYS (High contact capacity type) 1. Allowable ambient temperature 2. Max. switching capability (Resistive load) (High resistant/high contact capacity type) (High contact capacity/standard type) 3. Ambient temperature and operating voltage range 30A 100 40A 80 50A 60 40 Coil applied voltage, VDC 120 Switching voltage, VDC Maximum allowable ambient temperature, C (High contact capacity/standard type) 60 150 140 50 40 30 20 30 25 Operation range 20 15 10 60A 40 105 cycle line 10 0 100 110 120 130 140 Applied coil voltage, %V 5 Actual value (Max. 105) 70A 20 90 35 150 0 20 40 60 80 0 -40 -20 100 Switching current, A Pick-up voltage (Cold start) 0 20 40 60 80 85 100 120 Ambient temperature, C Assumption: * Maximum mean coil temperature: 180C * Curves are based on 1.4W (Nominal power consumption of the unsupprressed coil at nominal voltage) 4. Distribution of pick-up and drop-out voltage 5. Distribution of operate and release time 6. Contact resistance Sample: CB1aHF-12V, 53pcs. Sample: CB1aHF-12V, 53pcs. Sample: CB1aHF-12V, 53pcs. (By voltage drop 6V DC 1A) 70 40 30 20 10 60 Operate time Quantity, n 50 Operate and release time, ms Quantity, n 60 8 6 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Voltage, V ASCTB220E 201203-T1 Panasonic Corporation 50 40 30 4 20 Release time 2 10 0 70 12 Pick-up voltage Drop-out voltage 0 10 8 10 12 14 Coil voltage, V Automation Controls Business Unit 0 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 Resistance, m industrial.panasonic.com/ac/e/ CB 7-(1). Electrical life test (Motor free) Change of pick-up and drop-out voltage Sample: CB1aH-12V, 3pcs. Load: Inrush current: 64A/Steady current: 35A Fan motor actual load (motor free) 12V DC Operating frequency: ON 3s, OFF 7s Ambient temperature: Room temperature 50 7s 10s 9 8 7 6 Pick-up voltage 5 Max. X Min. 4 Drop-out voltage 3 Max. X Min. 2 1 0 M Contact resistance, m Pick-up and drop-out voltage, V 10 Circuit 3s Change of contact resistance 0 5 30 20 Max. 10 X Min. 0 10 No. of operations, x 10 40 0 5 10 No. of operations, x 104 4 Load current waveform Inrush current: 64A, Steady current: 35A 10A 500ms 7-(2). Electrical life test (Motor lock) Change of pick-up and drop-out voltage Sample: CB1aH-12V, 5pcs. Load: 100A 14V DC Magnet clutch actual load (lock condition) Operating frequency: ON 1s, OFF 9s Ambient temperature: Room temperature (5V DC applied) Pick-up voltage 5 Max. X Min. 4 Max. X Min. 3 2 Contact resistance, m Clutch Pick-up and drop-out voltage, V M 50 6 Circuit 14V DC Change of contact resistance 40 30 20 Drop-out voltage 10 1 Lock condition 0 0 10 20 40 60 80 100 0 0 10 No. of operations 20 40 60 80 Max. X Min. 100 No. of operations Load current waveform 100A 14V DC 20A 200ms Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB220E 201203-T1 CB CB RELAY (35 A type) 1-(1). Distribution of pick-up and drop-out voltage 1-(2). Distribution of pick-up and drop-out voltage 1-(3). Distribution of pick-up and drop-out voltage Sample: CB1aV-12V, 30pcs. Sample: CB1aV-24V, 30pcs. Sample: CB1V-24V, 30pcs. 20 20 Pick-up voltage Drop-out voltage 30 Pick-up voltage Drop-out voltage 18 10 Quantity, n Quantity, n Quantity, n 16 15 14 12 10 Pick-up voltage Drop-out voltage 25 20 15 8 10 6 5 4 5 2 0 0 0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 0 0 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 Voltage, V Voltage, V 0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 3.5 4.5 11.5 12.5 Voltage, V 2.-(1) Contact resistance 2.-(2) Contact resistance 2.-(3) Contact resistance Sample: CB1aV-12V, 30pcs. (By voltage drop 12 V DC 1A) Sample: CB1aV-24V, 30pcs. (By voltage drop 24 V DC 1A) Sample: CB1V-24V, 30pcs. (By voltage drop 24 V DC 1A) 25 20 25 N.C. side N.O. side 15 15 10 10 5 5 0 0 1.4 1.6 1.8 Quantity, n 20 Quantity, n Quantity, n 20 0 2.0 10 5 0 1.4 Contact resistance, m DIMENSIONS (mm inch) 15 1.6 1.8 0 2.0 0 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 Contact resistance, m The CAD data of the products with a CAD Data Contact resistance, m mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1. PC board type External dimensions CAD Data Schematic (Bottom view) 1 Form A 86 25.0 .984 30 87 85 4.5 .177 1.0 .039 Including resistor type also available 2.15 6.3 .085 .248 26.0 1.024 22.0 .866 1 Form C 86 30 87a 87 85 86 0.8 .031 8.4 .331 16.8 .661 87a 30 85 Including resistor type also available 87 8 .315 8.4 .331 17.9 .705 PC board pattern (Bottom view) 2.6 .102 4(or5)-2.6 4(or5)-.102 1 Form C type only 86 8.4 .331 87a Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: ASCTB220E 201203-T1 Panasonic Corporation General tolerance 0.1 .004 0.2 .008 0.3 .012 Automation Controls Business Unit 30 4(or5)-1.4 4(or5)-.055 87 16.8 .661 85 8.0 .315 8.4 .331 17.9 .705 1 Form C type only industrial.panasonic.com/ac/e/ CB 2. Plug-in type * The dimensions are the same as those of 35A type. CAD Data External dimensions Schematic (Bottom view) 1 Form A 86 25.0 .984 30 87 85 4.0 11.0.157 .433 Including resistor type also available 5-6.3 5-.248 26.0 1.024 1.7 dia. .067 dia. 22.0 .866 1 Form C 86 30 8.4 .331 86 87a 87 85 87a Including resistor type also available 0.8 .031 16.8 .661 30 87 85 2.6 .102 8 .315 8.4 .331 17.9 .705 Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: General tolerance 0.1 .004 0.2 .008 0.3 .012 3. Bracket type External dimensions CAD Data 16.0 .630 5.40.1 dia. .213.004 Schematic (Bottom view) 4.00.1 .157.004 1.7 .067 6.0 16.0 .236 .630 1 Form A 86 30 87 85 Including resistor type also available 1 Form C 25.0 .984 86 30 4.0 11.0.157 .433 22.0 .866 1.7 dia. .067 dia. 85 5-6.3 5-.248 26.0 1.024 87a 87 Including resistor type also available 0.8 .031 30 86 85 87a* 2.6 .102 87 8 .315 16.8 .661 17.9 .705 8.4 .331 8.4 .331 Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: Panasonic Corporation Automation Controls Business Unit General tolerance 0.1 .004 0.2 .008 0.3 .012 industrial.panasonic.com/ac/e/ ASCTB220E 201203-T1 CB 4. High contact capacity type (1 Form A) (Plug-in type) CAD Data External dimensions Schematic (Bottom view) 86 30 25.5 1.004 87 85 Including resistor type also available 4.0 11.0 .157 .433 15.0 .591 5.8 .228 2-6.3 0.08 2-.248 .003 26.5 1.043 4-1.7 dia. hole 4-.067 dia. hole 22.0 .866 2-9.50.08 2-.374.003 8.4 .331 0.8 .031 86 1.2 .047 16.8 .661 30 87 85 2.6 .102 8.4 .331 17.9 .705 Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: General tolerance 0.1 .004 0.2 .008 0.3 .012 5. High contact capacity type (1 Form A) (PC board type) CAD Data External dimensions Schematic (Bottom view) 86 30 25.5 1.004 1.0 .039 1.0 .039 4.5 .177 5.3 .209 3-1.7 3-.067 2-0.8 2-.031 A* 87 85 5.3 .209 2-2.15 9.5 6.3 2-.085 .374 .248 26.5 1.043 Sealed by epoxy resin 2-1.2 2-.047 1.0 .039 9.5 .374 22.0 .866 Including resistor type also available 4.5 .177 3-1.7 3-.067 PC board pattern (Bottom view) 1.4 .055 8.4 .331 3-2.15 3-.085 2.6 .102 86 30 85 87 3.9 .154 16.8 3.9 .661 .154 86 3-1.8 3-.071 30 87 7.8 .307 8.4 .331 16.8 .661 85 8.4 .331 3.9 3.9 .154 .154 17.9 .705 3-2.15 3-.085 2.6 .102 7.8 .307 8.4 .331 17.9 .705 3-1.8 3-.071 * Intervals between terminals is measured at A surface level. Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: General tolerance 0.1 .004 0.2 .008 0.3 .012 For Cautions for Use, see Relay Technical Information. ASCTB220E 201203-T1 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/