www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.026/02/13
Surface Mount Rectifier
Features:
• Plastic Package
• For Surface Mounted Applications
• Low Prole Package
• Built-In Strain Relief, Ideal for Automated Placement
• High Temperature Soldering : 250°C/10 seconds at Terminals
Mechanical Data
• Case : JEDEC DO-214AC molded plastic over passivated chip
• Terminals : Solder plated, solderable per MIL-STD-750, method 2026
• Polarity : Colour band denotes cathode end
• Weight : 0.002oz, 0.064g
Maximum Ratings and Thermal Characteristics
Ratings at 25°C ambient temperature unless otherwise specied
Note:
(1) Measured at 1MHz and applied reverse voltage of 4V
(2) Thermal resistance from junction to ambient and junction to lead PCB mounted on 0.27ʺ × 0.27ʺ (7 × 7mm2) copper pad areas
Characteristic Symbol S2GA-13-F S2JA-13-F S2MA-13-F Units
Maximum repetitive peak reverse voltage VRRM 400 600 1,000 V
Maximum RMS voltage VRWS 280 420 700 V
Maximum DC blocking voltage VDC 400 600 1,000 V
Maximum average forward rectied current at TL=90°C IF(AV) 2 A
Peak forward surge current at TL = 110°C 8.3 ms single
half-sine-wave superimposed on rated load (JEDEC Method) IFSM 50 A
Maximum instantaneous forward voltage at 2A VF1.15 V
Maximum DC reverse current TA=25°C
at rated DC blocking voltage TA=125°C IR5
125 μA
Typical junction capacitance (Note 1) CJ20 pF
Typical thermal resistance (Note 2) RθJA 50 °C/W
Operating junction and storage temperature range TJ, TSTG -55 to +150 °C