http://www.epsontoyocom.co.jp
Crystal oscillator Epson Toyocom
Specifications (characteristics)
SG-615PTW / STW
SG-531PTW / STW
SG-615PHW / SHW
SG-531PHW / SHW
SG-615PCW / SCW
SG-531PCW / SCW
55.001 MHz to 135.000 MHz
26.001 MHz to
135.000 MHz
B: 50 10-6 , C: ±100 × 10-6
No load condition( Max. frequency range )
50 % VCC level, L_CMOS=Max.
IOH=-16 mA(PTW,STW,PHW,SHW),-8 mA(PCW,SCW)
IOL= 16 mA(PTW,STW,PHW,SHW), 8 mA(PCW,SCW)
Output load condition
(TTL)
f0 90 MHz , Max.supply voltage
Output load condition
(CMOS)
Max.frequency , Max.supply voltage
20 % VCC to 80 % VCC level, L_CMOS Max.
Time at minimum supply voltage to be 0 s
+25 C, VCC=5.0 V / 3.3 V, First year
*1 “C” tolerance : fo ≥66.667 MHz(PTW,STW,PHW,SHW)
External dimensions (Unit:mm)
Footprint (Recommended) (Unit:mm)
.
To maintain stable operation, provide a 0.01uF to 0.1uF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product
(between Vcc - GND).
Note.
OE pin (P,PTJ,PTW,PHW,PCW,PCN,PCG)
OE pin = "H" or "open" : Specified frequency output.
OE pin = "L" : Output is high impedance.
ST pin (STW, SHW, SCW,SCG)
ST pin = "H" or "open" : Specified frequency output.
ST pin = "L" : Output is low level
(weak pull - down),oscillation stops.