Amphenol HDLM Series Hermaphroditic Duplex Lensed Miniature The Fibre Optic Hermaphroditic portfolio now contains a Duplex Lensed Connector. This product has been specifically designed to facilitate the interconnection of fibre optic cable assemblies in extreme harsh environments where cost and space are at a premium and lensing is preferred. Lightweight, small design. Plug and receptacle are environmentally sealed. Fully hermaphroditic wipeclean bayonet mechanism. Choice of materials and plating. Overmoulded version available. For ease of cleaning and washdown, the receptacle has no moving components and is a reverse mount jam nut design. High tension cable load capability. Amphenol HDLM Series - Hermaphroditic Duplex Lensed Miniature Technical Information HDLM Series - Hermaphroditic Duplex Lensed Miniature Performance Optical Insertion loss Typically less than 1dB using 62.5/125 Fibre types 50/125 62.5/125 Factory terminated Environmental Temperature range -55C +85C Mechanical Durability 500 matings aluminium / 1500 matings stainless steel Materials Plating: Zinc cobalt Material: Stainless steel Shell: Aluminium Ferrule: Zirconia Alignment sleeve: Ceramic Seals: Silicone HDLM Series - Hermaphroditic Duplex Lensed Miniature Part Number Information HDLM Series Plug Panel Mount Receptacle 062 072 Olive Drab Cadmium Olive Drab Zinc Cobalt Stainless Steel RW RZ SS Cable Variant 021 011 014 018 (Other cable options available on request) XXX XX XXX Simplex ruggedised 2mm O/D multimode (Receptacle only) Simplex ruggedised 3mm O/D multimode (Receptacle only) Duplex 5.5mm O/D multimode Loop back version Duplex multimode Notice: Products are sold subject to Amphenol's conditions of sale ("the standard conditions"). All specifications and statements contained herein are believed to be correct at the time of printing, but no representation or warranty, express or implied, is given as to any specification or statement contained herein. Product specifications including performance characteristics are typical only and subject to deviation. Specifications are also subject to change without notice. Users should not assume that all safety measures are indicated or that other measures may not be required. No representation or warranty, express or implied, is given that any use of products (including any stated or suggested use) does not infringe any patent, registered design or other third party rights and no stated or suggested use of products can be taken to recommend any such infringement. Amphenol Thanet Way, Whitstable, Kent. CT5 3JF. Tel: 01227 773200 Fax: 01227 276571 30.03.2000 For further information on cables, connectors and assemblies please consult your local office. Product specifications and performance characteristics are typical only, and subject to change.