ABJ1,2,3,4,5 TURQUOISE SWITCHES J TYPE (ABJ) HIGH ENVIRONMENTAL RESISTANCE FEATURES Dust protected type Immersion protected type (wire leads bottom type) * Ultra-miniature size (12.8x6.5x6 mm) (.504x.256x.236 inch) * Sealed construction for use in adverse environment-Sealed construction by epoxy resin and rubber cap keeps off the cause of miscontact such as dust. Conforming to IP67* of IEC protective construction classification * Elastomer double molding technology, an industry first and ultrasonic swaging technology contribute to uniform sealing in high production quantities * UL/CSA approved * Long stroke type is available Since the repeatability is excellent and the play distance (overtrabel) from the operating position is ample, the task of performing the adjustments during installation is an easy one. * Operating position accuracy 0.4 mm .016 inch * Overtravel= Min. 2.0 mm .079 inch As wide range of high pressure is achieved, a stable reliability is ensured (Mounting hole 2.3mm .091inch type) (Mounting hole 2.3mm .091inch type) TYPICAL APPLICATIONS * Industrial use video jack * Automotives (ex. Device for opening and shutting of automobile doors) *Based on the protective construction classification of IEC, items which satisfy the test requirements are denoted with an IP designation. Immersion protected (wire leads side type) Long stroke type ORDERING INFORMATION Ex. ABJ Type of switch ABJ: Turquoise switch J type Remarks: 1. 2. 3. 4. 1 4 1 0 4 0 Contact Actuator arrangement 1: 1.2 mm (.047 inch) 4: Solder terminal 1: SPDT 0: Pin plunger 2: 2.3 mm (.091 inch) 5: PC board terminal 2: SPST-NC 2: Hinge lever 3: 3 mm (.118 inch) 6: Wire leads (bottom type) 3: SPST-NO 4: Simulated roller lever 4: Fixed pin 7: Wire leads (right side type) 6: Roller lever (right side pin) type 8: Wire leads (left side type) 8: Leaf lever 5: Fixed pin L: Long stroke type (left side pin) type Size of mounting hole Terminal Operating force by pin plunger (max.) 4: 1.23 N {125 gf} 6: 1.96 N {200 gf} 7: 2.45 N {250 gf} (Long stroke type only) Contact 0: Silver-alloy 1: Gold-clad Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case; Immersion protected type 50 pcs./case. SPST-NC and SPST-NO are only available for wire leads type. Leaf lever is only available for wire leads type Not every combination is available. Please refer to the following table, "PRODUCT TYPES". 17 ABJ1,2,3,4,5 PRODUCT TYPES 1. Dust protected type (Terminal type) Mounting hole 1.2mm .047inch type / Mounting hole 2.3mm .091inch type Silver alloy Actuator Pin plunger Hinge lever Simulated roller lever Roller lever Operating force Max. 1.23 N {125 gf} 1.96 N {200 gf} 0.39 N {40 gf} 0.64 N {65 gf} 0.39 N {40 gf} 0.64 N {65 gf} 0.39 N {40 gf} 0.64 N {65 gf} Mounting hole 1.2 mm .047 inch type Solder terminal ABJ141040 ABJ141060 ABJ141240 ABJ141260 ABJ141440 ABJ141460 ABJ141640 ABJ141660 PC board terminal ABJ151040 ABJ151060 ABJ151240 ABJ151260 ABJ151440 ABJ151460 ABJ151640 ABJ151660 Mounting hole 2.3 mm .091 inch type Solder terminal ABJ241040 ABJ241060 ABJ241240 ABJ241260 ABJ241440 ABJ241460 ABJ241640 ABJ241660 Gold-clad Actuator Pin plunger Hinge lever Simulated roller lever Roller lever Operating force Max. 1.23 N {125 gf} 1.96 N {200 gf} 0.39 N {40 gf} 0.64 N {65 gf} 0.39 N {40 gf} 0.64 N {65 gf} 0.39 N {40 gf} 0.64 N {65 gf} Mounting hole 1.2 mm .047 inch type Mounting hole 2.3 mm .091 inch type Solder terminal ABJ241041 ABJ241061 ABJ241241 ABJ241261 ABJ241441 ABJ241461 ABJ241641 ABJ241661 Solder terminal ABJ141041 ABJ141061 ABJ141241 ABJ141261 ABJ141441 ABJ141461 ABJ141641 ABJ141661 PC board terminal ABJ151041 ABJ151061 ABJ151241 ABJ151261 ABJ151441 ABJ151461 ABJ151641 ABJ151661 SPDT ABJ161040 ABJ161060 ABJ161240 ABJ161260 ABJ161440 ABJ161460 ABJ161640 ABJ161660 Mounting hole 1.2 mm .047 inch type SPST-NC ABJ162040 ABJ162060 ABJ162240 ABJ162260 ABJ162440 ABJ162460 ABJ162640 ABJ162660 SPST-NO ABJ163040 ABJ163060 ABJ163240 ABJ163260 ABJ163440 ABJ163460 ABJ163640 ABJ163660 SPDT ABJ161041 ABJ161061 ABJ161241 ABJ161261 ABJ161441 ABJ161461 ABJ161641 ABJ161661 Mounting hole 1.2 mm .047 inch type SPST-NC ABJ162041 ABJ162061 ABJ162241 ABJ162261 ABJ162441 ABJ162461 ABJ162641 ABJ162661 SPST-NO ABJ163041 ABJ163061 ABJ163241 ABJ163261 ABJ163441 ABJ163461 ABJ163641 ABJ163661 2-(1). Immersion protected type (Bottom wire leads type) Mounting hole 1.2mm .047inch type Silver alloy Actuator Pin plunger Hinge lever Simulated roller lever Roller lever Operating force Max. 1.23 N {125 gf} 1.96 N {200 gf} 0.39 N {40 gf} 0.64 N {65 gf} 0.39 N {40 gf} 0.64 N {65 gf} 0.39 N {40 gf} 0.64 N {65 gf} Mounting hole 2.3mm .091inch type Gold-clad Actuator Pin plunger Hinge lever Simulated roller lever Roller lever Operating force Max. 1.23 N {125 gf} 1.96 N {200 gf} 0.39 N {40 gf} 0.64 N {65 gf} 0.39 N {40 gf} 0.64 N {65 gf} 0.39 N {40 gf} 0.64 N {65 gf} Remarks: When ordering UL/CSA approved types, please attach suffix "9" to the part number. 18 ABJ1,2,3,4,5 Mounting hole 2.3mm .091inch type Silver alloy Actuator Pin plunger Hinge lever Simulated roller lever Roller lever Operating force Max. 1.23 N {125 gf} 1.96 N {200 gf} 0.39 N {40 gf} 0.64 N {65 gf} 0.39 N {40 gf} 0.64 N {65 gf} 0.39 N {40 gf} 0.64 N {65 gf} SPDT ABJ261040 ABJ261060 ABJ261240 ABJ261260 ABJ261440 ABJ261460 ABJ261640 ABJ261660 Mounting hole 2.3 mm .091 inch type SPST-NC ABJ262040 ABJ262060 ABJ262240 ABJ262260 ABJ262440 ABJ262460 ABJ262640 ABJ262660 SPST-NO ABJ263040 ABJ263060 ABJ263240 ABJ263260 ABJ263440 ABJ263460 ABJ263640 ABJ263660 SPDT ABJ261041 ABJ261061 ABJ261241 ABJ261261 ABJ261441 ABJ261461 ABJ261641 ABJ261661 Mounting hole 2.3 mm .091 inch type SPST-NC ABJ262041 ABJ262061 ABJ262241 ABJ262261 ABJ262241 ABJ262461 ABJ262641 ABJ262661 SPST-NO ABJ263041 ABJ263061 ABJ263241 ABJ263261 ABJ263441 ABJ263461 ABJ263641 ABJ263661 SPDT ABJ361840 ABJ361860 Mounting hole 3 mm type SPST-NC ABJ362840 ABJ362860 SPST-NO ABJ363840 ABJ363860 SPDT ABJ361841 ABJ361861 Mounting hole 3 mm type SPST-NC ABJ362841 ABJ362861 SPST-NO ABJ363841 ABJ363861 Gold-clad Actuator Pin plunger Hinge lever Simulated roller lever Roller lever Operating force Max. 1.23 N {125 gf} 1.96 N {200 gf} 0.39 N {40 gf} 0.64 N {65 gf} 0.39 N {40 gf} 0.64 N {65 gf} 0.39 N {40 gf} 0.64 N {65 gf} Mounting hole 3mm .118inch type (Leaf lever type) Silver alloy Actuator Operating force Max. 0.98 N {100 gf} 1.27 N {130 gf} Leaf lever Gold-clad Actuator Operating force Max. 0.98 N {100 gf} 1.27 N {130 gf} Leaf lever 2-(2). Immersion protected type (Side wire leads type) Fixed pin (right side pin) type Silver alloy Actuator Leaf lever Operating force Max. Wire leads direction 1.27 N {130 gf} 1.27 N {130 gf} 1.76 N {180 gf} 1.76 N {180 gf} Right Left Right Left Operating force Max. Wire leads direction 1.27 N {130 gf} 1.27 N {130 gf} 1.76 N {180 gf} 1.76 N {180 gf} Right Left Right Left Operating force Max. Wire leads direction 1.27 N {130 gf} 1.27 N {130 gf} 1.76 N {180 gf} 1.76 N {180 gf} Right Left Right Left Wire leads type SPST-NC ABJ472840 ABJ482840 ABJ472860 ABJ482860 SPST-NO ABJ473840 -- ABJ473860 -- Gold-clad Actuator Leaf lever Wire leads type SPST-NC ABJ472841 ABJ482841 ABJ472861 ABJ482861 SPST-NO ABJ473841 -- ABJ473861 -- Fixed pin (left side pin) type Silver alloy Actuator Leaf lever Wire leads type SPST-NC ABJ572840 ABJ582840 ABJ572860 ABJ582860 SPST-NO ABJ573840 -- ABJ573860 -- Remarks: When ordering UL/CSA approved types, please attach suffix "9" to the part number. 19 ABJ1,2,3,4,5 Gold-clad Actuator Leaf lever Operating force Max. Wire leads direction 1.27 N {130 gf} 1.27 N {130 gf} 1.76 N {180 gf} 1.76 N {180 gf} Right Left Right Left Operating force Max. Wire leads direction 1.27 N {130 gf} 1.76 N {180 gf} Left Operating force Max. Wire leads direction 1.27 N {130 gf} 1.76 N {180 gf} Left Wire leads type SPST-NC ABJ572841 ABJ582841 ABJ572861 ABJ582861 SPST-NO ABJ573841 -- ABJ573861 -- Mounting hole 3mm .118inch type Silver alloy Actuator Leaf lever Wire leads type SPST-NC ABJ382840 ABJ382860 Gold-clad Actuator Leaf lever Wire leads type SPST-NC ABJ382841 ABJ382861 3. Immersion protected type (Bottom wire leads type) Long stroke type Mounting hole 2.3mm .091inch type Silver alloy Operating force Max. Actuator Pin plunger (Horizontal) 2.45 N {250 gf} SPDT ABJ261L70 Mounting hole 2.3 mm type SPST-NC ABJ262L70 SPST-NO ABJ263L70 SPDT ABJ261L71 Mounting hole 2.3 mm type SPST-NC ABJ262L71 SPST-NO ABJ263L71 Gold-clad Operating force Max. Actuator Pin plunger (Horizontal) 2.45 N {250 gf} Remarks: When ordering UL/CSA approved types, please attach suffix "9" to the part number. APPLICABLE CURRENT RANGE Contact Applicable current range 1mA 0.1A 1A 2A Max. operating force for operation (at pin plunger) 1.23 N {125 gf} 1.96 N {200 gf} Ag Au SPECIFICATIONS 1. Contact rating Type Operating force Max. 1.76 N {180 gf}, 1.96 N {200 gf} Silver alloy contact 1.23 N {125 gf}, 1.27 N {130 gf} Standard rating 2 A 125 V AC 2 A 30 V DC 1 A 125 V AC 1 A 30 V DC 1 A 125 V AC 1 A 30 V DC Long stroke type Silver alloy contact 2.45 N {250 gf} Gold-clad contact 1.23 N {125 gf}, 1.27 N {130 gf} 1.76 N {180 gf}, 1.96 N {200 gf} 0.1 A 125 V AC Long stroke type Gold-clad contact 2.45 N {250 gf} 0.1 A 125 V AC 0.1 A 30 V DC 20 Low-level circuit rating -- -- -- 5 mA 6 V DC 2 mA 12 V DC 1 mA 24 V DC 5 mA 6 V DC 2 mA 12 V DC 1 mA 24 V DC ABJ1,2,3,4,5 2. Characteristics Min. 5x105 (at 60 cpm) Min. 3x105 (at 60 cpm) Min. 106 (at 60 cpm) Min. 3x104 (at 60 cpm) Min. 105 (at 20 cpm) Min. 100 M (at 500 V DC insulation resistance meter) Leaf lever, Long stroke type Wire leads (right & left side type) Other types Silver alloy contact type Gold-clad contact type Mechanical life (O.T.: Specified value) Electrical life at rated load (O.T.: max.) Insulation resistance Dielectric strength Between non-continuous terminals Between each terminal and other exposed metal parts Between each terminal and ground Vibration resistance (Pin plunger type) Shock resistance (Pin plunger type) 600 Vrms 1,500 Vrms 1,500 Vrms 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening max. 1 msec.) Min. 294 m/s2{30 G} (Contact opening max. 1 msec.) Dust protected type (IP50): Max. 50 m Immersion protected type (IP67): Max. 100 m (By voltage drop 1 A 6 to 8 V DC) Dust protected type (IP50): Max. 100 m Immersion protected type (IP67): Max. 150 m (By voltage drop 0.1 A 6 to 8 V DC) 1 to 500 mm/sec. Other type: 120 cpm Long stroke type: 60 cpm -40C to +85C -40F to +185F Max. 95% R.H. Approx. 0.5 g .018 oz (IP50 type) Silver contact type Contact resistance (Initial) Gold clad contact type Allowable operating speed (at no load) Max. operating cycle rate (at no load) Ambient temperature Ambient humidity Unit weight 3. Operating characteristics Operating force / Release force / Pretravel Type of actuator Pin plunger Hinge lever Simulated roller lever Roller lever Leaf lever Long stroke type Operating force, Max. Release force, Min 1.23N {125gf} 1.96N {200gf} 0.39N {40gf} 0.64N {65gf} 0.39N {40gf} 0.64N {65gf} 0.39N {40gf} 0.64N {65gf} 0.98N {100gf} 1.27N {130gf} 2.45N {250gf} 0.15N {15gf} 0.25N {25gf} 0.029N {3.0gf} 0.049N {5.0gf} 0.029N {3.0gf} 0.049N {5.0gf} 0.029N {3.0gf} 0.049N {5.0gf} 0.20N {20gf} 0.29N {30gf} 0.19N {20gf} Pretravel, Max. mm inch 0.6 .024 3.0 .118 3.0 .118 3.0 .118 6.0 .236 -- Movement differential / Overtravel / Operating position Type of actuator Movement differential, Max. mm inch Overtravel, Min. mm inch 0.12 .005 0.5 .020 0.5 .020 0.5 .020 1.0 .039 0.5 .020 0.25 .010 0.5 .020 0.5 .020 0.5 .020 2.5 .098 2.0 .079 Pin plunger Hinge lever Simulated roller lever Roller lever Leaf lever Long stroke type Mounting hole: 1.2 .047 5.50.2 .217 .008 6.81.0 .286 .039 9.81.0 .386 .039 13.1 1.0 .516 .039 -- -- Operating position, mm inch Mounting hole: Mounting hole: 2.3 .091 3.0 .118 7.00.2 .276 .008 -- 8.31.0 .327 .039 -- 11.31.0 .445 .039 -- 14.61.0 .575 .039 -- -- 16.02.0 .630 .079 2.50.4 .098 .016 -- ( ): Low force type mm inch General tolerance: 0.25 .010 DIMENSIONS 1. Dust protected type 1-(1) PC board terminal Pin plunger 5.40.3 0.213.012 1.50.1 .059.004 0.9 .035 5.080.1 .200.039 Operating Position 5.50.2 1.0 0.0394 .217.008 5.00.15 .197.006 +0.12 2-0 dia. +.005 .079 -0 6.50.1 .256.004 5.080.15 5.080.15 .200.006 .200.006 12.80.15 .504.006 5.080.1 .200.039 1.10.12 .043.005 5.50 .217 6-C 0.3 6-C .012 1.20.05 dia. .047.002 dia. 1.5 dia .059 dia Pretravel 0.6Max. .024Max 1.50.12 .059.005 1.6 .063 4.4 .173 6 .236 t=0.4 .016 1.250.12 .049.005 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from stand-off, mm inch 0.6 .024 0.12 .005 0.25 .010 5.50.2 .217 .088 70.3 .276 .012 21 ABJ1,2,3,4,5 mm inch General tolerance: 0.25 .010 Hinge lever 8.6 .339 4.40.4 .173.016 Pretravel 3.0Max. .118Max R13.3 .524 1.20.05 dia. .047.002 dia. 3 .118 5.080.1 .200.039 Operating Position 6.81.0 .268.039 8.31.2 .327.047 4.2 .165 5.080.1 .200.039 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from stand-off, mm inch 3.0 .118 0.5 .020 0.5 .020 6.81.0 .267 .039 8.31.2 .327 .047 Simulated roller lever 3.30.4 .130.016 1.20.05 dia. .047.002 dia. Pretravel 3.0Max. .118Max 3 .118 R13.2 .520 R2.5 .098 5.080.1 .200.039 Operating Position 9.81.0 .386.039 5.080.1 .200.039 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from stand-off, mm inch 11.31.2 .445.047 3.0 .118 0.5 .020 0.5 .020 9.81.0 .386 .039 11.31.2 .445 .047 Roller lever Pretravel 3.0Max. .118Max 3.40.4 .134.016 R13.8 R.543 2.2 .087 1.20.05 dia. .047.002 dia. 4.8 dia. .189 dia. 5.080.1 .200.039 Operating Position 14.61.2 .575.047 5.080.1 .200.039 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from stand-off, mm inch 1-(2) Solder terminal Pin plunger Mounting hole: 1.2 mm .047 inch 5.40.3 0.213.012 Pretravel 0.6Max. .024Max Mounting hole: 2.3 mm .091 inch 1.5 dia .059 dia +0.12 2-1.2-0 dia. +.005 2-0.47-0 dia. 2.2 6.50.1 .087 .256.004 5.080.15 5.080.15 .200.006 .200.006 12.80.15 .504.006 1.2 .047 6-C 0.3 6-C .012 Pretravel 0.6Max .024Max 1.5 dia .059 dia +0.1 6.50.15 .256.006 5 .197 1.50.1 .059.004 4.60.3 0.181.012 2.4-.05 +.004 .094-.002 Operating Position 5.50.2 1.0 0.0394 .217.008 50.15 .197.006 1.5 .059 3.0 .118 0.5 .020 0.5 .020 13.11.0 .516 .039 14.61.0 .575 .039 0.4 .016 Operating Position 70.2 .276.008 5.7 .224 1.7 .067 1.5 .059 2 .079 +0.1 4.4 .173 6 .236 0.5 .020 5.080.15 .200.006 2.4-0.05 dia. +.004 .094-.002 dia. 1.2 .047 4.80.1 .189.004 6 .236 12.80.15 .504.006 2.2 .087 0.4 .016 6 .236 5.080.15 .200.006 Remarks: Dimensions of the actuator type are the same as corresponding PC board terminal types. 22 ABJ1,2,3,4,5 mm inch General tolerance: 0.25 .010 2. Immersion protected type 2-(1) Bottom wire leads type Pin plunger Mounting hole: 1.2 mm .047 inch Mounting hole: 2.3 mm .091 inch 13.9 .547 6.50.15 .256.006 8.2 .323 7.50 .295 Thickness of the lead wire: 0.3 mm2 UL/CSA approved type: AWG #20 Color of the lead wire: COM ...Black N.C. ...Red N.O. ...White 30010 11.811.394 52 .197.079 COM N.O. N.C. 30010 11.811.394 52 13.90.4 .547.016 6 .236 Thickness of the lead wire: 0.3 mm2 UL/CSA approved type: AWG #20 Color of the lead wire: COM ...Black N.C. ....Red N.O. ...White .197.079 Remarks: 1. As for M1.2 type, other dimensions are the same as those of corresponding PC board terminal types. As for M2.3 type, other dimensions are the same as those of corresponding solder terminal types. 2. Dimensions of the actuator type are the same as corresponding PC board terminal types. Leaf lever Mounting hole: 3 mm .118 inch 130.1 .512.004 4.80.3 .189.012 2.5 .098 8.61 .339.039 Pretravel 6 max. .236 max. R2.5 .098 9 .354 5 .197 Free Position (19.0) (.748) Operating Position (162) (.630.079) +0.1 5 .197 3.1-0.05 +.004 .122 -.002 9.25 .364 6.5 .256 3.3 .130 Totaltravel Position (11.5 min.) (.453) 7.5 .295 +0 3-0.15 dia. +0 .118 -.006 dia. 4.4 .173 R3.25 .128 30010 11.811.394 52 .197.079 20.00.4 .787.016 6 .236 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min mm inch Distance from Operating mounting hole, position mm inch 6.0 .236 1.0 .039 2.5 .098 16.02.0 .630 .079 23 ABJ1,2,3,4,5 mm inch General tolerance: 0.25 .010 2-(2) Side wire leads type Fixed pin type Right side pin type Right wire leads type C0.2 .008 +0.0 5.0-0.2 +0 .197-.008 Free position (F.P.) 13.05 .514 max. Operating position (O.P.) 10.70.7 .421.028 Totaltravel position (T.T.P.) (8.55)(.337) 6.7 .264 6.0 .236 5.0 .197 R2.0 .079 7.61.0 .299.039 9.530.1 .375.004 2.20.05 dia. .087.002 dia. 2.60.05 .102.002 9.53 .375 6.90.3 .272.012 3.45 .136 2.60.05 .102.002 8.55 .337 2 16.65 .656 5 .197.079 30010 11.811.394 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min mm inch Distance from Operating mounting hole, position mm inch 2.6 .102 0.5 .020 1.4 .055 10.70.7 .421 .028 Left wire leads type +0.0 5.0-0.2 +0 .197-.008 Free position (F.P.) 13.05 .514 max. Operating position (O.P.) 10.70.7 .421.028 Totaltravel position (T.T.P.) (8.55)(.337) 6.7 .264 6.0 .236 5.0 .197 C0.2 .008 R2.0 .079 7.61.0 .299.039 3.45 .136 2.60.05 .102.002 52 .197.079 9.530.1 .375.004 2.20.05 dia. .087.002 dia. 2.60.05 .102.002 9.53 .375 6.90.3 .272.012 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min mm inch Distance from Operating mounting hole, position mm inch 8.55 .337 30010 11.811.394 16.65 .656 Left side pin type Right wire leads type C0.2 .008 2.6 .102 0.5 .020 1.4 .055 10.70.7 .421 .028 9.53 .375 2.60.05 .102.002 2.20.05 dia. .087.002 dia. +0.0 5.0-0.2 +0 .197-.008 2.60.05 .102.002 6.7 .264 6.0 .236 5.0 .197 Free position (F.P.) 13.05 .514 max. Operating position (O.P.) 10.70.7 .421.028 Totaltravel position (T.T.P.) (8.55)(.337) 9.530.1 .375.004 R2.0 .079 7.61.0 .299.039 6.90.3 .272.012 3.45 .136 8.55 .337 2 16.65 .656 24 5 .197.079 30010 11.811.394 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min mm inch Distance from Operating mounting hole, position mm inch 2.6 .102 0.5 .020 1.4 .055 10.70.7 .421 .028 ABJ1,2,3,4,5 mm inch General tolerance: 0.25 .010 Left wire leads type 9.53 .375 2.60.05 .102.002 2.20.05 dia. .087.002 dia. C0.2 .008 +0.0 5.0-0.2 +0 .197-.008 6.7 .264 6.0 .236 5.0 .197 Free position (F.P.) 13.05 .514 max. Operating position (O.P.) 10.70.7 .421.028 Totaltravel position (T.T.P.) (8.55)(.337) 9.530.1 .375.004 R2.0 .079 7.61.0 .299.039 6.90.3 .272.012 3.45 .136 2.60.05 .102.002 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min mm inch Distance from Operating mounting hole, position mm inch 8.55 .337 2 5 .197.079 30010 11.811.394 16.65 .656 2.6 .102 0.5 .020 1.4 .055 10.70.7 .421 .028 Mounting hole 3mm .118 inch type C0.30 .012 +0.1 8.4-0.3 +.004 .331-.012 +0.2 6.0-0.15 +.008 .236-.006 5.0 .197 Free position (F.P.) 18.6 .732 max. Operating position (O.P.) 16.250.7 .640.028 Totaltravel position (T.T.P.) (14.1)(.555) +0 3.0-0.1 dia. +0 dia. .118-.004 R2.0 .079 5.81.0 .228.039 2 5 .197.079 30010 11.811.394 12.3 .484 0.3 1.85.012 .073 +0.1 3.1-0 +.004 .122-0 9.0 .354 3.3 .130 4.0 .157 0.1 13.0 .512.004 19.6 .772 6.0 .236 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min mm inch Distance from Operating mounting hole, position mm inch 2.6 .102 0.5 .020 1.4 .055 16.250.7 .640 .028 25 ABJ1,2,3,4,5 mm inch General tolerance: 0.25 .010 3. Immersion protected type (Bottom wire leads type) Long stroke type Mounting hole: 2.3 mm .091 inch Free position (F.P.) 3.2 .126 max. Operating position (O.P.) 1.0 2.50.4 .098.016 .039 4.95 .195 16.7 .657 9.0 .354 6.0 .236 12.8 .504 3.0 +0. -0.15 dia. .118+0 -.006 dia. 2.0 dia. .079 dia. 6.00.15 .236.006 +0.1 2.4-0.05 8.1 +.004 .236-.002 .319 19.4 .764 2.50.1.004 .098 8.2 .323 C0.6 .024 -0.05 dia. 2.4 +0.1 -.002 dia. .236+.004 0.1 4.8 .004 .189 30010 11.811.394 52 .197.079 COM NO 0.4 13.9.016 .547 26 NC Movement differential, Max. mm inch Overtravel, Min mm inch Operating position 0.5 .020 2.0 .079 2.5 0.4 .098.016