TESTING HIGH INSULATION RELAYS TX-D RELAYS (Conforming to the supplementary insulation class of EN Standards (EN41003)) 15 .591 8.2 .323 15 .591 * Surface-mount type also available. * M.B.B. type also available * The use of gold-clad twin crossbar contacts ensures high contact reliability. * Outstanding vibration and shock resistance. Functional shock resistance: 750 m/s2 {75G} Destructive shock resistance: 1,000 m/s2 {100G} Functional vibration resistance: 10 to 55 Hz (at double amplitude of 3.3 mm .130 inch) Destructive vibration resistance: 10 to 55 Hz (at double amplitude of 5 mm .197 inch) * Sealed construction allows automatic washing. Satisfies the following conditions: * Clearances: 2.0 mm .079 inch or more * Creepage distance: 2.5 mm .098 inch or more * 2,000 V breakdown voltage between contact and coil. The body block construction of the coil that is molded by plastic offers a high breakdown voltage of 2,000 V between contact and coil, and 1,000 V between open contacts. * Outstanding surge resistance. Surge withstand between open contacts: 1,500 V 10x160 sec. (FCC part 68) Surge withstand between contact and coil: 2,500 V 2x10 sec. (Bellcore) * High sensitivity 200 mW. * High contact capacity: 2 A 30 V DC (Standard type) 7.4 .291 7.4 .291 8.4 .333 mm inch FEATURES * Approved to the supplementary insulation class in the EN standards (EN41003). The insulation distance between the contact and coil meet the supplementary insulation class of the EN41003 standards as required for equipment connected to the telephone lines in Europe. SPECIFICATIONS Contact Characteristics Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current Min. switching capacity 1 Rating Single side stable Nominal operating power 1 coil latching Mechanical (at 180 cpm) Expected life (min. operations) Electrical (at 20 cpm) Standard (B.B.M) type 2 Form C M.B.B.type 2 Form D 100 m Gold-clad silver 2 A 30 V DC 1 A 30 V DC 60 W 30 W 220 V DC 110 V DC 2A 1A 10 A 10 mV DC 200 mW 250 mW (1.5 to 12 V DC) (1.5 to 12 V DC) 230 mW 270 mW (24 V DC) (24 V DC) 150 mW (1.5 to 12 V DC) -- 170 mW (24 V DC) 107 108 105 (2 A 30 V DC resistive), 105 (1 A 30 V DC 5 x105 (1 A 30 V resistive) DC resistive) Notes: 1This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. 2The upper limit for the ambient temperature is the maximum temperature that can satisfy the coil temperature rise. Under the packing condition, allowable temperature range is from -40 to +70C -40C to +158F. Initial insulation resistance*1 Between open contacts Initial breakBetween contact down and coil 2 voltage* Between contact sets Between conInitial tacts, 10 x160 s surge Between contact voltage and coil, 2x10 s Temperature rise (at 20C) Operate time [Set time]*5 (at 20C) Release time [Reset time]*6 (at 20C) M.B.B. time*12 Functional Destructive*9 Functional*10 Vibration resistance Destructive Conditions for opera- Ambient tion, transport and temp. 2 storage*11 (Not freezing and condensing Humidity at low temperature) Unit weight Shock resistance Standard (B.B.M) type M.B.B.type Min. 1,000 M (at 500 V DC) 1,000 Vrms for 1 min. 500 Vrms for 1 min. 2,000 Vrms for 1 min. 1,000 Vrms for 1 min. 1,500 V [FCC Part 68] - 2,500 V [Bellcore] Max. 50C*4 Max. 50C*3 Max. 4 ms (Approx. 2 ms) Max. 4 ms [Max. 4 ms (Approx. 2 ms) (Approx. 2 ms)] Max. 4 ms (Approx. 1 ms) Max. 4 ms [Max. 4 ms (Approx. 1 ms) (Approx. 2 ms)] -- Min. 10 s Min. 750 m/s2 {75 G}*7 Min. 500 m/s2 {50 G}*8 Min. 1,000 m/s2 {100 G} 10 to 55 Hz at double amplitude of 3.3 mm 10 to 55 Hz at double amplitude of 5 mm -40C to +85C -40F to +185F 5 to 85%R.H. Approx. 2 g .071 oz. Remarks * *1 *2 *3 *4 *5 *6 *7 *8 *9 *10 *11 Specifications will vary with foreign standards certification ratings. Measurement at same location as "Initial breakdown voltage" section. Detection current: 10 mA By resistive method; nominal voltage applied to the coil; contact carrying current: 2 A. By resistive method; nominal voltage applied to the coil; contact carrying current: 1 A. Nominal voltage applied to the coil, excluding contact bounce time. Nominal voltage applied to the coil, excluding contact bounce time without diode. Half-wave pulse of sine wave: 6 ms.; detection time: 10 s. Half-wave pulse of sine wave: 11 ms.; detection time: 10 s. Half-wave pulse of sine wave: 6 ms. Detection time: 10 s. Refer to 4. Conditions for operation, transport and storage mentioned in Cautions for use (Page 178). 160 *12 M.B.B. time: Min. 10 s x Measuring condition 500 5 V DC TX-D TYPICAL APPLICATIONS * Facsimiles * Modems * Communication devices ORDERING INFORMATION 1) Standard (B.B.M.)type Contact arrangement 2: 2 Form C Ex. TXD Surface-mount availability SA - L - Operating function Nil: Standard PC board terminal or Nil: Single side self-clinching terminal stable SA: Standard surface-mount terminal L: 1 coil latching SL: High connection reliability surface-mount terminal type SS: Space saving surface-mount terminal type 2) M.B.B.type Ex. TXD Contact arrangement 2: 2 Form D 2 2 Surface-mount availability SA - - 4.5V Operating function - Z Coil voltage (DC) Terminal shape Nil: Standard PC board terminal or surfacemount type H: Self-clinching terminal 2M - - Packing style 1.5, 3, 4.5, 5, 6, 9, 12, 24 V 4.5V - Nil: Tube packing Z: Tape and reel packing (Picked from the 8/9/ 10/12-pin side) Z Coil voltage (DC) Terminal shape Nil: Standard PC board terminal or 2M: 2 M.B.B. type Nil: Standard PC self-clinching terminal board terminal SA: Standard surface-mount terminal or surfaceSL: High connection reliability surface-mount mount type terminal type H: Self- clinching SS: Space saving surface-mount terminal type terminal 1.5, 3, 4.5, 5, 6, 9, 12, 24 V Packing style Nil: Tube packing Z: Tape and reel packing (Picked from the 8/9/ 10/12-pin side) Notes: 1. Tape and reel (picked from 1/3/4/5-pin side) is also available by request. Part number. suffix "-X" is needed when ordering. (ex.) TXD2SA-3V-X 2. Tape and reel packing symbol "-Z" or "-X" are not marked on the relay. Surface-mount terminal variation Variation Usable conditions based on terminal connection solder reliability Normal environments (indoor) Drastic temperature fluctuations (outdoor) Terminal style SA type (Standard surface-mount terminal type) 0.25 .010 8.4 .331 5.08 .200 Recommended -- Recommended Recommended Recommended Recommended 0.5 9.4 .370.020 0.25 .010 Max. 10.0 .394 SL type (Highly connection reliability surfacemount terminal type) 5.08 .200 9.40.5 .370.020 SS type (Space saving surface-mount terminal type) 0.25 .010 Max. 10.0 .394 5.08 .200 0.5 7.4 .291.020 OPERATION INFORMATION Open Contact Operation During Operation Operation Complete During Reset Reset Complete M.B.B. contact operation N.C. COM N.O. N.C. COM N.O. N.C. COM N.O. N.C. COM N.O. N.C. COM N.O. N.C. COM N.O. N.C. COM N.O. N.C. COM N.O. N.C. COM N.O. N.C. COM N.O. Standard (B.B.M.) contact operation 161 TX-D TYPES AND COIL DATA (at 20C 68F) 1. Standard (B.B.M.) type (1) Standard PC board terminal and self-clinching terminal 1. Single side stable Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24 Part No. V DC Standard PC board terminal TXD2-1.5V TXD2-3V TXD2-4.5V TXD2-5V TXD2-6V TXD2-9V TXD2-12V TXD2-24V Self-clinching terminal TXD2-H-1.5V TXD2-H-3V TXD2-H-4.5V TXD2-H-5V TXD2-H-6V TXD2-H-9V TXD2-H-12V TXD2-H-24V Pick-up voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18 Drop-out voltage, V DC (min.) (initial) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 Nominal operating current, mA (10%) 132.7 66.7 44.4 40.0 33.3 22.2 16.7 9.6 Nominal operating current, mA (10%) 100.0 50.0 Nominal operating power, mW 200 200 200 200 200 200 200 230 Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8 15 60 Nominal operating power, mW 150 150 Max. allowable voltage, V DC 1.8 3.6 135 166 240 540 960 3,388 150 150 150 150 150 170 5.4 6 7.2 10.8 14.4 28.8 Nominal operating power, mW 200 200 200 200 200 200 200 230 Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8 Nominal operating power, mW 150 150 150 150 150 150 150 170 Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8 Coil resistance, (10%) 11 45 101 125 180 405 720 2,504 2. 1 coil latching 1.5 3 TXD2-L-1.5V TXD2-L-3V TXD2-L-H-1.5V TXD2-L-H-3V 1.13 2.25 Reset voltage, V DC (max.) (initial) 1.13 2.25 4.5 5 6 9 12 24 TXD2-L-4.5V TXD2-L-5V TXD2-L-6V TXD2-L-9V TXD2-L-12V TXD2-L-24V TXD2-L-H-4.5V TXD2-L-H-5V TXD2-L-H-6V TXD2-L-H-9V TXD2-L-H-12V TXD2-L-H-24V 3.38 3.75 4.5 6.75 9 18 3.38 3.75 4.5 6.75 9 18 33.3 30.0 25.0 16.7 12.5 7.1 Drop-out voltage, V DC (min.) (initial) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 Nominal operating current, mA (10%) 132.7 66.7 44.4 40.0 33.3 22.2 16.7 9.6 Reset voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18 Nominal operating current, mA (10%) 100.0 50.0 33.3 30.0 25.0 16.7 12.5 7.1 Coil Rating, V DC Part No. Standard PC board terminal Self-clinching terminal Set voltage, V DC (max.) (initial) Coil resistance, (10%) Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package. Note: In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay. (2) Surface-mount terminal 1. Single side stable Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24 Part No. Tape and reel packing Tube packing TXD2S-1.5V TXD2S-3V TXD2S-4.5V TXD2S-5V TXD2S-6V TXD2S-9V TXD2S-12V TXD2S-24V TXD2S-1.5V-Z TXD2S-3V-Z TXD2S-4.5V-Z TXD2S-5V-Z TXD2S-6V-Z TXD2S-9V-Z TXD2S-12V-Z TXD2S-24V-Z Pick-up voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18 Coil resistance, (10%) 11 45 101 125 180 405 720 2,504 2. 1 coil latching Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24 Part No. Tube packing TXD2S-L-1.5V TXD2S-L-3V TXD2S-L-4.5V TXD2S-L-5V TXD2S-L-6V TXD2S-L-9V TXD2S-L-12V TXD2S-L-24V Tape and reel packing TXD2S-L-1.5V-Z TXD2S-L-3V-Z TXD2S-L-4.5V-Z TXD2S-L-5V-Z TXD2S-L-6V-Z TXD2S-L-9V-Z TXD2S-L-12V-Z TXD2S-L-24V-Z Set voltage, V DC (max.) (initial) 1.13 2.25 3.38 3.75 4.5 6.75 9 18 Coil resistance, (10%) 15 60 135 166 240 540 960 3,388 : For each surface-mounted terminal variation, input the following letter. SA type: A , SL type: L , SS type: S Standard packing:40 pcs. (tube), 500 pcs. (tape and reel) in an inner package; 1,000 pcs. in an outer package Notes: 1. Tape and reel packing symbol "-Z" is not marked on the relay. "X" type tape and reel packing (picked from 1/3/4/5-pin side) is also available. 2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay. 162 TX-D 2. M.B.B. Type (1) Standard PC board terminal and self-clinching terminal Single side stable Coil Rating, V DC 1.5 3 4.5 5 6 9 12 24 Part No. Standard PC board terminal TXD2-2M-1.5V TXD2-2M-3V TXD2-2M-4.5V TXD2-2M-5V TXD2-2M-6V TXD2-2M-9V TXD2-2M-12V TXD2-2M-24V Self-clinching terminal TXD2-2M-H-1.5V TXD2-2M-H-3V TXD2-2M-H-4.5V TXD2-2M-H-5V TXD2-2M-H-6V TXD2-2M-H-9V TXD2-2M-H-12V TXD2-2M-H-24V Pick-up voltage, V DC (max.) Drop-out voltage, V DC (min.) 1.13 2.25 3.38 3.75 4.5 6.75 9 18 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 Nominal operating current, mA (10%) 166.7 83.3 55.6 50.0 41.7 27.8 20.8 11.3 Nominal operating power, mW 250 250 250 250 250 250 250 270 Max. allowable voltage, V DC 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8 9 Nominal operating power, mW 250 Max. allowable voltage, V DC 1.8 36 81 100 144 324 576 2,133 250 250 250 250 250 250 270 3.6 5.4 6 7.2 10.8 14.4 28.8 Coil resistance, (10%) 9 36 81 100 144 324 576 2,133 Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package (2) Surface-mount terminal Single side stable 1.5 TXD2S-2M-1.5V TXD2S-2M-1.5V-Z 1.13 0.15 Nominal operating current, mA (10%) 166.7 3 4.5 5 6 9 12 24 TXD2S-2M-3V TXD2S-2M-4.5V TXD2S-2M-5V TXD2S-2M-6 TXD2S-2M-9 TXD2S-2M-12 TXD2S-2M-24 TXD2S-2M-3V-Z TXD2S-2M-4.5V-Z TXD2S-2M-5V-Z TXD2S-2M-6V-Z TXD2S-2M-9V-Z TXD2S-2M-12V-Z TXD2S-2M-24V-Z 2.25 3.38 3.75 4.5 6.75 9 18 0.3 0.45 0.5 0.6 0.9 1.2 2.4 83.3 55.6 50.0 41.7 27.8 20.8 11.3 Coil Rating, V DC Part No. Tape and reel packing Tube packing Set voltage, V DC (max.) Reset voltage, V DC (min.) Coil resistance, (10%) : For each surface-mounted terminal variation, input the following letter. SA type: A , SL type: L , SS type: S Standard packing: 40 pcs. (tube), 500 pcs. (tape and reel) in an inner package; 1,000 pcs. in an outer package Notes: 1. Tape and reel packing symbol "-Z" is not marked on the relay. "X" type tape and reel packing (picked from 1/3/4/5-pin side) is also available. 2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay. DIMENSIONS mm inch 1. Standard PC board terminal and self-clinching terminal Standard PC board terminal 15 .591 7.4 .291 PC board pattern (Copper side view) 2.54 .100 10.16 .400 0.65 8.2 .026 .323 0.5 .020 1.15 .045 Self clinching terminal 5.08 .200 5.08 .200 2.54 .100 15 .591 + 5.08 .200 3.5 .138 0.25 .010 Schematic (Bottom view) Single side stable 1 coil latching (Deenergized condition) (Reset condition) 8-1.0 dia 8-.039 dia Tolerance: 0.1 .004 - 1 3 4 5 12 10 9 8 Direction indication* - + 1 3 4 5 12 10 9 8 Direction indication* *Orientation stride located on top of relay. 7.4 .291 0.65 8.2 .026 .323 0.5 .020 1.15 .045 3.5 .138 5.08 .200 2.54 .100 5.08 .200 0.25 .010 General tolerance: 0.3 .012 163 TX-D 2. Surface-mount terminal SA type mm inch Suggested mounting pad (Top view) 15 .591 8.2 .323 0.5 .020 0.5 .020 0.5 .020 5.08 .200 12 10 9 8 - + 1 3 4 5 1 3 4 5 Direction indication 2.54 .100 7.24 .285 1 5.08 .039 .200 Max. 10.0 .390 2.54 .100 2.16 .085 6.24 .246 5.08 0.25 .200 7.40.5 .010 .291.020 0.65 2.54 .026 .100 + 3.16 .124 7.4 .291 8.2 .323 10 9 8 For glue-pad 15 .591 5.08 0.25 .200 9.40.5 .010 .370.020 15 .591 SS type 12 Direction indication 1 5.08 .039 .200 Max. 10.0 .390 0.65 2.54 .026 .100 5.08 .200 0.3 .012 7.4 .291 8.2 .323 - 1.6 .0.63 7.24 .285 5.08 .200 0.25 9.40.5 .010 .370.020 15 .591 SL type 2.54 .100 3.16 .124 8.4 .331 0.65 2.54 .026 .100 5.08 .200 1 5.08 .039 .200 7.4 .291 Schematic (Top view) Single side stable 1 coil latching (Deenergized condition) (Reset condition) General tolerance: 0.3 .012 Tolerance: 0.1 .004 REFERENCE DATA 1. Maximum switching capacity 2. Life curve 3. Mechanical life Ratio against the rated voltage, %V Tested sample: TXD2-5V, 10 pcs. Operating frequency: 180 cpm No. of operations x104 3.0 Switching current, A 2.0 DC resistive load 1.0 0.5 0.4 0.3 100 50 30 30V DC resistive load 20 10 0.2 100 90 Pick-up voltage 80 Max. 70 60 Min. 50 Drop-out voltage 40 Max. 30 Min. 20 10 0 20 30 0 50 100 200 300 Contact voltage, V 0 1.0 2.0 Switching current, A 0 10 100 1000 No. of operations, x104 10000 4. Electrical life (2 A 30 V DC resistive load) 5-(1). Coil temperature rise Tested sample: TXD2-5V, 6 pcs. Operating frequency: 20 cpm Tested sample: TXD2-5V, 6 pcs. Measured portion: Inside the coil Ambient temperature: 25C 77F, 70C 158F Change of contact resistance 100 90 90 Pick-up voltage 80 Max. 70 Min. 60 50 Drop-out voltage 40 Max. 30 20 Min. 10 0 164 70 80 70 60 Max. 50 40 Min. 30 20 Temperature rise, C 100 Contact resistance, m Ratio against the rated voltage, %V Change of pick-up and drop-out voltage +25C +77F +70C +158F 60 50 40 2A 30 2A 20 0A 0A 10 10 0 2 4 6 8 No. of operations, x104 10 0 0 2 4 6 8 No. of operations, x104 10 0 100 110 120 Coil applied voltage, %V TX-D Tested sample: TXD2-24V, 6 pcs. Measured portion: Inside the coil Ambient temperature: 25C 77F, 70C 158F 6-(1). Operate/release time characteristics (with diode) 6-(2). Operate/release time characteristics (without diode) Tested sample: TXD2-5V, 10 pcs. Tested sample: TXD2-5V, 10 pcs. 70 Operate and release time, ms 60 Temperature rise, C 5 +25C +77F +70C +158F 50 40 2A 2A 30 0A 0A 20 5 Operate time Release time 4 Max. Min. 3 Max. Min. 2 Operate and release time, ms 5-(2). Coil temperature rise 0 100 0 110 120 Coil applied voltage, %V 4 Max. Min. 3 2 Max. Min. 1 1 10 Operate time Release time 70 80 90 100 0 120 110 70 80 Coil applied voltage, %V 90 100 110 120 Coil applied voltage, %V 8. Distribution of set and reset voltage 9. Ambient temperature characteristics Tested sample: TXD2-5V, 50 pcs. Tested sample: TXD2-L-12V, 30 pcs. Tested sample: TXD2-5V, 5 pcs. Set voltage Reset voltage 35 Pick-up voltage 15 Drop-out voltage Quantity Quantity 30 25 20 10 15 10 5 5 0 Variation ratio, % ,,,,,,,,,,,,, ,,,,,,,,, , , , ,, ,, ,, ,, , 7. Distribution of pick-up and drop-out voltage 10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V -40 -20 0 40 x 20 Drop-out voltage x Pick-up voltage 20 40 60 80 Ambient temperature, C -20 -40 0 10 20 30 40 50 60 70 80 90 100 Ratio against the rated voltage, %V 10. Distribution of contact resistance 11-(1). High-frequency characteristics 11-(2). High-frequency characteristics Tested sample: TXD2-5V, 30 pcs. (30 x 4 contacts) Isolation characteristics Tested sample: TXD2-12V, 2 pcs. Insertion loss characteristics Tested sample: TXD2-12V, 2 pcs. 25 20 15 Insertion loss, dB , , , , , ,,,,,, Quantity Terminal Nos. 3-4, 9-10 ,,,, ,,,,,, Terminal Nos. 4-5, 8-9 30 Isolation, dB 35 100 1.0 0.8 0.6 50 10 0.4 5 0.2 0 20 30 40 50 Contact resistance, m 0 10 100 Frequency, MHz 1,000 12-(1). Malfunctional shock (single side stable) 12-(2). Malfunctional shock (latching) Tested sample: TXD2-5V, 6 pcs Tested sample: TXD2-L-12V, 6 pcs. Z' Y Y' Z XX' Y 1000m/s 2 Deenergized condition Energized condition Z' Y Y' Z XX' Y 1000m/s 2 10 100 Frequency, MHz 1,000 Reset state Set state X 1000m/s 2 Z 1000m/s 2 X 1000m/s 2 Z 1000m/s 2 1000m/s 2 Z' 1000m/s 2 X' 1000m/s 2 Z' 1000m/s 2 X' 1000m/s 2 Y' 0 1000m/s 2 Y' 165 TX-D Tested sample: TXD2-12V, 6 pcs. ON 0 -5 ON OFF OFF 5 Drop-out voltage 0 OFF -5 0 ON 5 0 Pick-up voltage -5 ON OFF 5 0 Drop-out voltage OFF -5 OFF 0 2 4 6 8 10 .079 .157 .236 .315 .394 Inter-relay distance ON Rate of change, % ON Pick-up voltage Rate of change, % Rate of change, % 5 Rate of change, % 13-(3). Influence of adjacent mounting Tested sample: TXD2-12V, 6 pcs. Rate of change, % 13-(2). Influence of adjacent mounting Tested sample: TXD2-12V, 6 pcs. Rate of change, % 13-(1). Influence of adjacent mounting 2 4 6 8 10 .079 .157 .236 .315 .394 Inter-relay distance 5 Pick-up voltage ON 0 ON -5 ON ON 5 OFF Drop-out voltage 0 OFF -5 OFF OFF 0 , mm inch 2 4 6 8 10 .079 .157 .236 .315 .394 Inter-relay distance Change of pick-up and drop-out voltage Change of contact resistance , mm inch , mm inch Circuit 458 + 0.08 F 48 V DC - 0.08 F 4 TXD 3 458 Wire spring relay 100 100 90 90 80 Pick-up voltage Max. Min. 70 60 50 Drop-out voltage 40 30 Max. 20 Min. 10 0 Contact resistance, m Tested sample: TXD2-5V, 6 pcs. Ratio against the rated voltage, %V 14. Actual load test (35 mA 48 V DC wire spring relay load) 80 70 60 50 40 Max Min. 30 20 10 0 10 20 30 40 No. of operation, x104 50 0 0 10 20 30 40 No. of operation, x104 50 15-(1). Distribution of M.B.B. time Tested sample: TXD2-2M-5V, 50 pcs. Terminal No. 3-4-5: ON Terminal No. 3-4-5: OFF 60 60 300.5 s x: n-1: 55.3 s Min.: 165 s Max.: 415 s 50 40 30 298.8 s x: n-1: 51.8 s Min.: 205 s Max.: 432 s 50 40 30 22 20 16 12 7 350 400 450 s max. 250 300 350 400 s min. 150 200 250 300 350 400 450 s max. ~ 300 200 ~ 250 150 ~ 200 100 ~ 150 1 0 ~ 400 s min. ~ 350 ~ 300 ~ 250 ~ 200 ~ 150 ~ 8 1 100 ~ 0 13 10 6 2 ~ 10 12 ~ 20 15-(2). Distribution of M.B.B. time Tested sample: TXD2-2M-5V, 50 pcs. Terminal No. 8-9-10: ON Terminal No. 8-9-10: OFF 40 30 30 5 4 10 400 s min. 150 200 250 300 350 400 450 s max. ~ 350 ~ 300 ~ 250 ~ 200 ~ 150 ~ 4 3 100 ~ 0 15 6 4 1 1 0 100 150 200 250 300 350 400 s min. 150 200 250 300 350 400 450 s max. ~ 10 10 ~ 10 19 20 ~ 18 ~ 40 20 281.4 s x: n-1: 50.8 s Min.: 420 s Max.: 421 s 50 ~ 50 60 ~ 293.4 s x: n-1: 60.4 s Min.: 155 s Max.: 445 s ~ 60 For Cautions for Use, see Page 178 and 179. 166 9/1/2000 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. Go To Online Catalog