SP-Cap/ Specialty Polymer Aluminum Capacitors (Conductive Polymer Aluminum Capacitors) Surface Mount Type Series: L Features Low ESL by structure of SP-Cap 50% ESL of current products Super Low-ESR (4.5 m) High temperature reflow soldering applicable (Peak : 260 C 10s, main heating : 230 C 40s) RoHS directive compliant Specifications Category Temp. Range Rated W.V.Range Nominal Cap.Range Capacitance Tolerance DC Leakage Current tan Surge Voltage Endurance Moisture resistance -40 C to +105 C 2 to 2.5 V.DC 330 F to 560 F 20 % (120 Hz/+20 C) I < 0.1 CV (A) 2 minutes < 0.06 (120 Hz/+20 C) Rated Working Voltage 1.25 (15 C to 35 C) After applying rated working voltage for 1000 hours at 105 C2 C, and then being stabilized at +20 C, capacitor shall meet the following limits. Capacitance change 10% of initial measured value tan < Initial specified value DC leakage current < Initial specified value After storing for 500 hours at 60 C, 90 % 2 to 2.5 V.DC Capacitance change of initial measurd value +70, -20 % tan < 200 % of initial specified value DC leakage current < Initial specified value Marking Dimensions in mm(not to scale) + H Cap. Polarity bar (Positive) L W1 P4 Lot No. W2 + W2 - P1 W.V. code P3 P2 P1 (mm) L0.2 W10.2 H0.2 W20.1 P10.3 P20.1 P30.2 P40.2 7.3 4.3 1.9 2.4 1.3 1.1 0.7 1.4 Externals of figure are the reference. Standard Products CapaciSeries & Rated tance W.V. L Size Code (V.DC) (20 %) (mm) (F) 330 2 470 LX 560 2.5 470 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 Case Size Specification 1 W (mm) H (mm) 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 2 Ripple ESR current (Ar.m.s.) (m max.) 3.5 6 3.8 4.5 3.5 6 3.8 4.5 3.5 6 3.8 4.5 3.5 6 3.8 4.5 Part number Min. Packaging Q'ty Reflow condition : 240 C Reflow condition : 260 C (pcs) [Proposal] 3 3 -- -- -- -- -- -- -- -- EEFLX0D331R EEFLX0D331R4 EEFLX0D471R EEFLX0D471R4 EEFLX0D561R EEFLX0D561R4 EEFLX0E471R EEFLX0E471R4 3500 3500 3500 3500 3500 3500 3500 3500 1: Ripple current (100 kHz/ +20 to +105 C ), 2: ESR (100 kHz/+20 C) 3: Please confirm EE25 in detail of the Mouting Specifications. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - EE20 - 02 Feb. 2012