DSP 25 VRRM = 1200/1600 V IF(RMS) = 2x43 A IF(AV)M = 2x28 A Phase-leg Rectifier Diode VRSM VRRM V V 1300 1700 1200 1600 TO-247 AD TO-268 AA ISOPLUS 247 TM DSP 25-12AT DSP 25-16AT DSP 25-16AR TO-268 AA Version A Version AT Type DSP 25-12A DSP 25-16A Symbol Test Conditions IF(RMS) IF(AV)M TVJ = TVJM Tcase = 100C; 180 sine IFSM TVJ = 45C; I2t TO-247 AD 1 2 3 Maximum Ratings 43 28 A A t = 10 ms t = 8.3 ms (50 Hz), sine (60 Hz), sine 300 330 A A TVJ = 150C; t = 10 ms t = 8.3 ms (50 Hz), sine (60 Hz), sine 270 300 A A TVJ = 45C t = 10 ms t = 8.3 ms (50 Hz), sine (60 Hz), sine 450 450 A2s A2s TVJ = 150C; t = 10 ms t = 8.3 ms (50 Hz), sine (60 Hz), sine 340 325 A2s A2s -40...+180 180 -40...+150 C C C 0.8...1.2 20...120 Nm N TVJ TVJM Tstg Md * FC mounting torque M3 mounting force with clip VISOL ** 50/60 Hz, RMS, t = 1 minute, leads-to-tab Weight 2500 TO-268 / TO-247 4/6 1 2 3 1 2 (TAB) 3 2 (TAB) ISOPLUS 247 TM Version AR 1 2 TAB 3 1 = Cathode, 2 = Anode/Cathode, 3 = Anode Features International standard packages JEDEC TO-247 AD and TO-268 AA surface mountable For single and three phase bridge configuration Planar passivated chips Epoxy meets UL 94V-0 flammability classification Version AR isolated and UL registered E153432 V~ g TO-247 AD and ISOPLUS 247 TM * Verson A only; ** Version AR only Test Conditions IR TVJ = 150C VF IF = 55 A; TVJ = 25C VT0 rT Characteristic Values 2 mA 1.6 V For power-loss calculations only TVJ = TVJM 0.8 15 V m RthJC RthCH DC current DC current (with heatsink compound) 1.5 0.4 K/W K/W a Maximum allowable acceleration 100 m/s2 VR = VRRM Dim. TO-268 AA Outline Dim. Millimeter Min. Max. Inches Min. Max. A A1 A2 4.9 2.7 .02 5.1 2.9 .25 .193 .106 .001 .201 .114 .010 b b2 C 1.15 1.9 .4 1.45 2.1 .65 .045 .75 .016 .057 .83 .026 D E E1 13.80 15.85 13.3 14.00 16.05 13.6 .543 .624 .524 .551 .632 .535 e H L 5.45 BSC 18.70 19.10 2.40 2.70 .215 BSC .736 .752 .094 .106 L1 L2 L3 L4 1.20 1.40 1.00 1.15 0.25 BSC 3.80 4.10 .047 .055 .039 .045 .010 BSC .150 .161 Data according to IEC 60747 and refer to a single diode IXYS reserves the right to change limits, test conditions and dimensions Millimeter Min. Max. Inches Min. Max. A B 19.81 20.32 20.80 21.46 0.780 0.819 0.800 0.845 C D* 15.75 16.26 3.55 3.65 0.610 0.140 0.640 0.144 E F 4.32 5.4 5.49 6.2 0.170 0.212 0.216 0.244 G H 1.65 - 2.13 4.5 0.065 - 0.084 0.177 J K 1.0 10.8 1.4 11.0 0.040 0.426 0.055 0.433 L M 4.7 0.4 5.3 0.8 0.185 0.016 0.209 0.031 N 1.5 2.49 0.087 0.102 * ISOPLUS 247 TM without hole 211 Symbol 1-2 (c) 2002 IXYS All rights reserved http://store.iiic.cc/ DSP 25 70 A 200 103 50 Hz, 80% VRRM 60 2 It IFSM IF 50 VR = 0 V A2s A TVJ = 45C 40 TVJ = 45C 100 30 TVJ = 150C TVJ = 25C 20 TVJ = 150C TVJ = 150C 10 0 0.0 0.5 102 0 0.001 1.5 V 2.0 1.0 0.01 0.1 VF 1 s 1 2 3 t Fig. 1 Forward current versus voltage drop per diode 4 5 6 7 ms 8 910 t Fig. 3 I2t versus time per diode Fig. 2 Surge overload current 60 30 W A RthJA: 50 0.5 1.8 3 5 8 15 Ptot 40 30 Id(AV)M KW KW KW KW KW KW 20 20 10 10 0 0 0 5 10 15 20 25 A 0 40 80 120 160 C 0 Tamb Id(AV)M Fig. 4 Power dissipation versus direct output current and ambient temperature, sine 180 1.6 K/W 1.4 30 60 90 120 150 180C TC Fig. 5 Max. forward current versus case temperature 1.2 1.0 0.8 Constants for ZthJC calculation: 0.6 i Rthi (K/W) ti (s) 0.4 1 2 3 4 5 0.06075 0.183 0.3405 0.543 0.3728 0.0004 0.00256 0.0045 0.0242 0.15 0.2 0.0 0.0001 DSP25 0.001 0.01 0.1 1 s 10 t Fig. 6 Transient thermal impedance junction to case 2-2 (c) 2002 IXYS All rights reserved http://store.iiic.cc/