2SA1987
2012-08-31
1
TOSHIBA Transistor Silicon PNP Triple Diffused Type
2SA1987
Power Amplifier Applications
High breakdown voltage: VCEO = 230 V (min)
Complementary to 2SC5359
Recommended for 100-W high-fidelity audio frequency amplifier
output stage.
Absolute Maximum Ratings (Ta = 25°C)
Characteristics Symbol Rating Unit
Collector-base voltage VCBO
230 V
Collector-emitter voltage VCEO
230 V
Emitter-base voltage VEBO
−5 V
Collector current I
C
15 A
Base current IB
−1.5 A
Collector power dissipation
(Tc = 25°C)
PC 180 W
Junction temperature Tj 150 °C
Storage temperature range Tstg 55 to 150 °C
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating
conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Unit
: mm
JEDEC
JEITA
TOSHIBA 2-21F1A
Weight: 9.75 g (typ.)
2SA1987
2012-08-31
2
Electrical Characteristics (Tc = 25°C)
Characteristics Symbol Test Condition Min Typ. Max Unit
Collector cut-off current ICBO VCB = −230 V, IE = 0 −5.0 μA
Emitter cut-off current IEBO VEB = −5 V, IC = 0 −5.0 μA
Collector-emitter breakdown voltage V (BR) CEO IC = −50 mA, IB = 0 230 V
DC current gain
hFE (1)
(Note 1)
VCE = −5 V, IC = −1 A 55 160
hFE (2) VCE = −5 V, IC = −7 A 35 70
Collector-emitter saturation voltage VCE (sat) IC = −8 A, IB = −0.8 A 1.5 3.0 V
Base-emitter voltage VBE VCE = −5 V, IC = −7 A 1.0 1.5 V
Transition frequency fT VCE = −5 V, IC = −1 A 30 MHz
Collector output capacitance Cob VCB = −10 V, IE = 0, f = 1 MHz 360 pF
Note 1:hFE (1) classification R: 55 to 110, O: 80 to 160
Marking
2SA1987
TOSHIBA
JAPAN
Lot No.
Note 2
Note 2: A line under a Lot No. identifies the indication of product Labels.
Not underlined : [[Pb]]/INCLUDES > MCV
Underlined : [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to environmental
matters such as the RoHS compatibility of Product.
The RoHS is the Directive 2002/95/EC of the European Parliament and of the
Council of 27 January 2003 on the restriction of the use of certain hazardous
substances in electrical and electronic equipment.
2SA1987
2012-08-31
3
I
C
– V
CE
Collector current I
C
(A)
Collector-emitter voltage VCE (V)
I
C
– V
BE
Collector current I
C
(A)
Base-emitter voltage VBE (V)
h
FE
– I
C
DC current gain h
FE
Collector current IC (A)
Collector-emitter voltage VCE (V)
Collector current I
C
(A)
Collector current IC (A)
V
CE (sat)
– I
C
Collector-emitter saturation voltage
V
CE
(sat)
(V)
Safe Operating Area
Common emitter
Tc = 25°C
0
0
IB = 10 mA
800
−4
−8
12
16
20
−2 −4 −6 −8 10
50
600
400
250
200
150
100
−40
20
30
Common emitter
VCE = −5 V
0
0
Tc = 100°C
−4
−8
12
16
20
25
0.4 0.8 1.2 1.6 2.0
25
Common emitter
VCE = −5 V
1
0.01
25
25
10
30
100
300
0.1 −1 10
Tc = 100°C
−100
3
Common emitter
IC/IB = 10
Tc = 100°C
0.01
0.01
0.1 1
0.1
−3
−1
25
25
0.3
10 100
0.03
*: Single nonrepetitive pulse
Tc = 25°C
Curves must be derated
linearly with increase in
temperature.
IC max (pulsed)*
DC operation
Tc = 25°C
−1
−3
10
30
100 ms*
10 ms*
1 ms*
VCEO max
0.3
100 300 1000
−1
0.03
0.1
30
IC max (continuous)
10
100
0.01
−3
2SA1987
2012-08-31
4
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABIL ITY FOR CUSTOMERS' PRODUCT DESI G N OR
APPLICATIONS.
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A M ALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BO DILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SE RIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTE NDED USE, TOSHIBA ASSUMES NO LI ABIL I TY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A W RITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTE NT ALLOWABLE BY L AW, TOSHIBA (1) A SSUMES NO LIABILITY
WH ATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSE Q UENTIAL, SPECIAL, OR INCI DENTAL DAMAGES OR
LOSS, INCL UDING WITHOUT LIMITATION, LOSS OF PROFI TS, LOSS OF OPPORTUNITIES, BUSINESS I NTERRUPTION AND
LOSS OF DATA, AND (2) DIS CLAIMS ANY AND ALL EXPRESS OR IMPLIED W ARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATI O N, INCLUDING WARRANTIES O R CO NDI TI O NS OF MERCHANTABILITY, FI TNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF I NF O RMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGUL ATI ONS.