1310nm/1310nm Bi-Di Transceiver Module Description The PT8361 series contain a 1310nm MQW F-P laser diode as transmitter, an InGaAs photo-detector integrated with a trans-impedance amplifier (5V or optional 3.3V) into the TO-can and a post amplifier as receiver, and a splitter to separate input and output light. So a full duplex or half-duplex optical link can be built for a wide variety of data communication applications with high-speed up to 1Gb/s rate, long distance up to 40km, They use 9/125 m diameter single fiber with optional FC/APC or SC/APC connector . Transmitter Charcteristics Parameter Symbol Condition Min Typ Max Unit CW 1260 1310 1360 nm 15 10 CW(RMS) - - 4 nm Center Wavelength P o(PT8361-3 -1) Po Spectral Width - 8 dBm Extinction Ratio EX - 10 - - dB Operating Current I op 3.3V/5.0V - 70 100 mA Receiver Charcteristics Parameter Symbol Wavelength Condition Min Typ Max Unit R<10% 1260 1310 1360 nm - - 30 50 - - Full Duplex Sensitivity - P o = 10dBm Signal Detect Assert Level - - Signal Detect Deassert Level - - - - Operating Current I op 3.3V/5.0V - 80 Features MQW F-P 1310nm laser diode as transmitter InGaAs PIN with TIA and postamplifier (5V or optional 3.3V) as receiver 1310 nm wavelength output, output power 10dBm (typically) 1310 nm wavelength input, responsivity 0.5A/W (typically) dBm Low cross talk duplex sensitivity dBm Integrated a splitter to separate input and output light 33 dBm 100 mA 30dB, full 30dBm 1 9 compatible single mode fiber package with optional FC/APC or SC/APC connector Operation temperature from 0 to 70 Absolute Maximum Ratings Parameter Condition Operating Temperature Min Max T op 40 85 Storage Temperature T stg 40 85 Lead Soldering Temperature /Time T sld - 240/10 Optical Return Loss APC connector 45 - Units Applications /s dB Telecommunication systems Data communication systems Let work for you